Chemistry with Graphene and Graphene Oxide-Challenges for Synthetic Chemists

A scalable, robust, and highly oriented flexible composite film inspired by a "brick-mortar" pillared structure for lithium ion batteries

Macro-assembled silicon-based films can be taken into account as a possible anode material for the lithium ion batteries (LIBs) in portable electronics. However, most previously proposed preparation strategies are labor-intensive, intricate, and not appropriate for large-scale manufacturing. Herein, a multifunctional flexible silicon/carbon nanotube/reduced graphene oxide (Si/CNT/rGO) film was fabricated by one-step coating method based on the lyotropic nematic liquid crystals of graphene oxide (GO). The composite film's structure is made up of stacked rGO nanosheets, with nano-Si and CNT interspersed between the layers, resembling a "brick-mortar" pillared configuration. The prepared Si/CNT/rGO film demonstrates an exceptional tensile strength, reaching up to 134 MPa, and manifests commendable lithium storing properties in terms of initial charge capacity (1885 mAh/g at 200 mA/g) and cyclability (1376.4 mAh/g beyond 200 cycles). The straightforward preparation method offers a fresh path to create stable and mechanically robust composite film for advanced engineering applications.

Atomically thin 2D materials for solution-processable emerging photovoltaics

Atomically thin 2D materials, such as graphene and graphene oxide, covalent organic frameworks, layered carbides, and metal dichalcogenides, reveal a unique variability of electronic and chemical properties, ensuring their prospects in various energy generation, conversion, and storage applications, including light harvesting in emerging photovoltaic (ePV) devices with organic and perovskite absorbers. Having an extremely high surface area, the 2D materials allow a broad variability of the bandgap and interband transition type, conductivity, charge carrier mobility, and work function through mild chemical modifications, external stimuli, or combination with other 2D species into van-der-Waals heterostructures. This review provides an account of the most prominent "selling points" of atomically thin 2D materials as components of ePV solar cells, including highly tunable charge extraction selectivity and work function, structure-directing and stabilizing effects on halide perovskite light absorbers, as well as broad adaptability of 2D materials to solution-based manufacturing of ePV solar cells using sustainable and upscalable printing technologies. A special focus is placed on the large potential of the materials discovery and design of ePV functionalities based on van-der-Waals stacking of atomically thin 2D building blocks, which can open a vast compositional domain of new materials navigable with machine-learning-based accelerated materials screening.

Nano-Metal-Organic Frameworks and Nano-Covalent-Organic Frameworks: Controllable Synthesis and Applications

Nanoscale framework materials have attracted extensive attention due to their diverse morphology and good properties, and synthesis methods of different size structures have been reported. Therefore, the relationship between different sizes and performance has become a research hotspot. This paper reviews the controllable synthesis strategies of nano-metal-organic frameworks (nano-MOFs) and nano-covalent-organic frameworks (nano-COFs). Firstly, the synthetic evolution of nano-frame materials is summarized. Due to their special surface area, regular pores and adjustable structural functions, nano-frame materials have attracted much attention. Then the preparation methods of nanostructures with different dimensions are introduced. These synthetic strategies provide the basis for the design of novel energy storage and catalytic materials. In addition, the latest advances in the field of energy storage and catalysis are reviewed, with emphasis on the application of nano-MOFs/COFs in zinc-, lithium-, and sodium-based batteries, as well as supercapacitors.

Quantitative relationship between surface chemistry of graphene and compatibility with rubbers established by two-dimensional solubility parameters

Hildebrand (δ T) and Hansen (δ D, δ P, δ H) solubility parameters are important indexes to predict the compatibility of components intuitively. Currently, almost all the experiments only measured the solubility parameters of the pristine graphene. Therefore, there is a lack of quantitative relationship between the surface chemistry of graphene and solubility parameters, resulting in no theoretical guidance for the surface modification of graphene. In this work, three-dimensional Hansen solubility parameters are converted to two-dimensional solubility parameters. Hildebrand and two-dimensional solubility parameters of six functionalized graphene as a function of grafting ratio are calculated by molecular dynamics (MD) simulation. Interestingly, if the functional group is at the edge of graphene, the δ T decreases with the increase of the grafting ratio, whereas if the functional group is in the plane of graphene, the δ T decreases first and then increases with grafting ratio. Two-dimensional solubility parameters are proved to be a good predictor of the compatibility between functionalized graphene and rubbers. The quantitative relationship between the surface chemistry of graphene and compatibility with rubbers based on two-dimensional solubility parameters is constructed. The optimum grafting ratio corresponding to the best compatibility is given. Finally, the effect of temperature on the compatibility behaviors of graphene/rubber mixtures is elucidated.

Size-Dependent Magnetic Responsiveness of a Photonic Crystal of Graphene Oxide Nanosheets

A magnetically responsive photonic crystal of colloidal nanosheets can exhibit a controllable structural color, offering diverse potential applications. In this study, we systematically investigated how the lateral sizes of graphene oxide (GO) nanosheets affect their magnetic responsiveness in a photonic system. Contrary to the prediction that larger lateral sizes of nanosheets would be more responsive to an applied magnetic field based on the magnetic energy of anisotropic materials, we discovered that GO nanosheets with larger lateral sizes in the photonic system scarcely responded to a 12 T magnetic field. The lack of magnetic response may be due to the strongly restricted rotational motion of GO nanosheets by mutual electrostatic forces. In contrast, GO nanosheets with medium lateral sizes readily responded to the 12 T magnetic field, forming a uniaxially oriented structure that resulted in a vivid structural color. However, smaller GO nanosheets displayed a less vivid structural color, possibly because of less structural ordering of GO nanosheets. Finally, we found that the photonic crystal of GO nanosheets with optimized lateral sizes responded effectively to the 12 T magnetic field across various GO concentrations, resulting in a vivid and tunable structural color.

Twenty Years of Graphene: From Pristine to Chemically Engineered Nano-Sized Flakes

It is a celebratory moment for graphene! This year marks the 20th anniversary of the discovery of this amazing material by Geim and Novoselov. Curiously, it coincides with the century mark of graphite's layered structure discovery. Since the discovery of graphene with the promise that its outstanding properties would change the world, society often wonders where is graphene? In this context, their discoverers said in 2005, "despite the reigning optimism about graphene-based electronics, "graphenium" microprocessors are unlikely to appear for the next 20 years". Today, possibilities for graphene are endless! It can be used in electronics, photonics, fuel cells, energy storage, artificial intelligence, biomedicine, and even cultural heritage or sports. Additionally, the electronic properties of this material have been modified in fascinating ways. Bilayer graphene sheets have been found to be superconductive when twisted at a "magic angle", leading to a new and exciting field of research known as "moiré quantum materials" or "twistronics". Additionally, small graphene fragments with nanometer sizes undergo a quantum confinement effect of electrons, affording semiconductive materials with applications in optoelectronics. Organic synthesis allows the preparation of molecules with a graphene-like pattern with total control of the shape and size, exhibiting a big catalog of chiroptical and optoelectronic properties. This Perspective shows some of the fascinating milestones raised in the field of graphene-like materials from a chemical point of view, including functionalization strategies employed to chemically modify the topology and the properties of pristine graphene as well as the rising molecular graphenes.

Anthraquinones-based photocatalysis: A comprehensive review

In recent years, there has been significant interest in photocatalytic technologies utilizing semiconductors and photosensitizers responsive to solar light, owing to their potential for energy and environmental applications. Current efforts are focused on enhancing existing photocatalysts and developing new ones tailored for environmental uses. Anthraquinones (AQs) serve as redox-active electron transfer mediators and photochemically active organic photosensitizers, effectively addressing common issues such as low light utilization and carrier separation efficiency found in conventional semiconductors. AQs offer advantages such as abundant raw materials, controlled preparation, excellent electron transfer capabilities, and photosensitivity, with applications spanning the energy, medical, and environmental sectors. Despite their utility, comprehensive reviews on AQs-based photocatalytic systems in environmental contexts are lacking. In this review, we thoroughly describe the photochemical properties of AQs and their potential applications in photocatalysis, particularly in addressing key environmental challenges like clean energy production, antibacterial action, and pollutant degradation. However, AQs face limitations in practical photocatalytic applications due to their low electrical conductivity and solubility-related secondary contamination. To mitigate these issues, the design and synthesis of graphene-immobilized AQs are highlighted as a solution to enhance practical photocatalytic applications. Additionally, future research directions are proposed to deepen the understanding of AQs' theoretical mechanisms and to provide practical applications for wastewater treatment. This review aims to facilitate mechanistic studies and practical applications of AQs-based photocatalytic technologies and to improve understanding of these technologies.

Emerging Advances around Nanofluidic Transport and Mass Separation under Confinement in Atomically Thin Nanoporous Graphene

Membrane separation stands as an environmentally friendly, high permeance and selectivity, low energy demand process that deserves scientific investigation and industrialization. To address intensive demand, seeking appropriate membrane materials to surpass trade-off between permeability and selectivity and improve stability is on the schedule. 2D materials offer transformational opportunities and a revolutionary platform for researching membrane separation process. Especially, the atomically thin graphene with controllable porosity and structure, as well as unique properties, is widely considered as a candidate for membrane materials aiming to provide extreme stability, exponentially large selectivity combined with high permeability. Currently, it has shown promising opportunities to develop separation membranes to tackle bottlenecks of traditional membranes, and it has been of great interest for tremendously versatile applications such as separation, energy harvesting, and sensing. In this review, starting from transport mechanisms of separation, the material selection bank is narrowed down to nanoporous graphene. The study presents an enlightening overview of very recent developments in the preparation of atomically thin nanoporous graphene and correlates surface properties of such 2D nanoporous materials to their performance in critical separation applications. Finally, challenges related to modulation and manufacturing as well as potential avenues for performance improvements are also pointed out.

Applications of metal nanoclusters supported on the two-dimensional material graphene in electrocatalytic carbon dioxide reduction

Metal nanoclusters (MNCs) have been demonstrated to exhibit superior catalytic performance compared to single nanoparticles. This is attributed to their quantized electronic structure, unique geometrical stacking and abundant active sites. While the exposed metal atoms can markedly enhance the efficiency of catalysis, unfortunately, MNCs are susceptible to agglomeration, which impairs their catalytic activity and stability. Graphene is a two-dimensional material consisting of a single atomic layer formed by the hybridization of the s and p orbitals of carbon atoms. It exhibits stable physical and chemical properties and has an easily controllable structure, making it an ideal carrier for MNCs. When metal nanoclusters (MNCs) are loaded on a graphene substrate, the MNCs can form a stable binding site on the graphene substrate. Furthermore, the construction of a defective structure on the graphene substrate enables the formation of robust interactions between the metal atoms of the MNCs and the substrate, facilitating the rapid establishment of electron conduction pathways and markedly enhancing the electrocatalytic performance. This paper presents a review of the applications of metal nanoclusters supported on graphene skeletons in the field of the electrocatalytic CO2 reduction reaction (CO2RR). Firstly, we briefly introduce the reaction mechanism of the CO2RR, then we systematically discuss the synthesis strategies, properties and applications of metal nanoclusters in electrocatalytic carbon dioxide reduction from both experimental and theoretical perspectives, and lastly, we discuss the opportunities and challenges of metal nanocluster catalysts supported on carbon materials.

The Construction of Face-to-Face Combination between NiFe-layered Double Hydroxide Nanosheets and Monolayer rGO for Efficient Water Splitting and Oxygen Reduction

Developing cost-effective and efficient electrocatalysts is essential for advancing a green energy future. Herein, a NiFe-layered double hydroxide loaded on reduced graphene oxide (NiFe-LDHs@rGO) hybrid was synthesized using a straightforward three-step process involving exfoliation tearing, electrostatic self-assembly, and chemical reduction. The face-to-face packing and ultrathin exfoliation enable strong heterogeneous interactions, fully harnessing the potential of these complementary two-dimensional counterparts. Consequently, the resultant catalyst displays outstanding oxygen evolution reaction (OER) catalytic activity and stability, whose overpotential is as low as 241 mV at 30 mA cm-2 and 255 mV at 50 mA cm-2 with a low Tafel slope of 62.1 mV dec-1. Both the experimental results and density functional theory (DFT) calculations reveal that the face-to-face assembly strengthens the electronic interactions between NiFe-LDHs and rGO, which effectively modulates the d-band center of Ni and Fesites and improves the reaction kinetics for OER. Moreover, the resultant NiFe-LDHs@rGO hybrids exhibit excellent multifunctional catalytic performance. Its hydrogen evolution reaction (HER) activity is endowed by Fe-site of NiFe-LDHs and defect states rGO and achieves a low voltage of 1.68 V to drive a current density of 10 mA cm-2 for overall water splitting. The face-to-face heteroassembly also imparts NiFe-LDHs@rGO with superior oxygen reduction reaction (ORR) activity, with a half-wave potential of 0.70 V and a limiting current density of 4.2 mA cm-2. Its ORR primarily follows a four-electron transfer pathway with a minor contribution from a two-electron process. This study establishes the groundwork for optimizing two-dimensional heterogeneous interfaces in LDH@carbon-based materials for advanced energy conversion.

Efficacy of graphene nanocomposites for air disinfection in dental clinics: A randomized controlled study

BACKGROUND

Aerosols containing disease-causing microorganisms are produced during oral diagnosis and treatment can cause secondary contamination.

AIM

To investigate the use of graphene material for air disinfection in dental clinics by leveraging its adsorption and antibacterial properties.

METHODS

Patients who received ultrasonic cleaning at our hospital from April 2023 to April 2024. They were randomly assigned to three groups (n = 20 each): Graphene nanocomposite material suction group (Group A), ordinary filter suction group (Group B), and no air suction device group (Group C). The air quality and air colony count in the clinic rooms were assessed before, during, and after the procedure. Additionally, bacterial colony counts were obtained from the air outlets of the suction devices and the filter screens in Groups A and B.

RESULTS

Before ultrasonic cleaning, no significant differences in air quality PM2.5 and colony counts were observed among the three groups. However, significant differences in air quality PM2.5 and colony counts were noted among the three groups during ultrasonic cleaning and after ultrasonic treatment. Additionally, the number of colonies on the exhaust port of the suction device and the surface of the filter were significantly lower in Group A than in Group B (P = 0.000 and P = 0.000, respectively).

CONCLUSION

Graphene nanocomposites can effectively sterilize the air in dental clinics by exerting their antimicrobial effects and may be used to reduce secondary pollution.

2D nanomaterials-based delivery systems and their potentials in anticancer synergistic photo-immunotherapy

As the field of cancer therapeutics evolves, integrating two-dimensional (2D) nanomaterials with photo-immunotherapy has emerged as a promising approach with significant potential to augment cancer treatment efficacy. These 2D nanomaterials include graphene-based 2D nanomaterials, 2D MXenes, 2D layered double hydroxides, black phosphorus nanosheets, 2D metal-organic frameworks, and 2D transition metal dichalcogenides. They exhibit high load capacities, multiple functionalization pathways, optimal biocompatibility, and physiological stability. Predominantly, they function as anti-tumor delivery systems, amalgamating diverse therapeutic modalities, most notably phototherapy and immunotherapy, and the former is a recognized non-invasive treatment modality, and the latter represents the most promising anti-cancer strategy presently accessible. Thus, integrating phototherapy and immunotherapy founded on 2D nanomaterials unveils a novel paradigm in the war against cancer. This review delineates the latest developments in 2D nanomaterials as delivery systems for synergistic photo-immunotherapy in cancer treatment. We elaborate on the burgeoning realm of photo-immunotherapy, exploring the interplay between phototherapy and enhanced immune cells, immune response modulation, or immunosuppressive tumor microenvironments. Notably, the strategies to augment photo-immunotherapy have also been discussed. Finally, we discuss the challenges and future perspectives of these 2D nanomaterials in photo-immunotherapy.

Real Time Tracking of Nanoconfined Water-Assisted Ion Transfer in Functionalized Graphene Derivatives Supercapacitor Electrodes

Water molecules confined in nanoscale spaces of 2D graphene layers have fascinated researchers worldwide for the past several years, especially in the context of energy storage applications. The water molecules exchanged along with ions during the electrochemical process can aid in wetting and stabilizing the layered materials resulting in an anomalous enhancement in the performance of supercapacitor electrodes. Engineering of 2D carbon electrode materials with various functionalities (oxygen (─O), fluorine (─F), nitrile (─C≡N), carboxylic (─COOH), carbonyl (─C═O), nitrogen (─N)) can alter the ion/water organization in graphene derivatives, and eventually their inherent ion storage ability. Thus, in the current study, a comparative set of functionalized graphene derivatives-fluorine-doped cyanographene (G-F-CN), cyanographene (G-CN), graphene acid (G-COOH), oxidized graphene acid (G-COOH (O)) and nitrogen superdoped graphene (G-N) is systematically evaluated toward charge storage in various aqueous-based electrolyte systems. Differences in functionalization on graphene derivatives influence the electrochemical properties, and the real-time mass exchange during the electrochemical process is monitored by electrochemical quartz crystal microbalance (EQCM). Electrogravimetric assessment revealed that oxidized 2D acid derivatives (G-COOH (O)) are shown to exhibit high ion storage performance along with maximum water transfer during the electrochemical process. The complex understanding of the processes gained during supercapacitor electrode charging in aqueous electrolytes paves the way toward the rational utilization of graphene derivatives in forefront energy storage applications.

Revisiting oxidation and reduction reactions for synthesizing a three-dimensional hydrogel of reduced graphene oxide

An improvement to Hummers' method involving a cascade-design graphite oxidation reaction is reported to optimize safety and efficiency in the production of graphite oxide (GrO) and graphene oxide (GO). Chemical reduction using highly alkaline ammonia solution is a novel approach to synthesizing reduced graphene oxide (RGO). In this original research, we revisit the oxidation and reduction reactions, providing significant findings regarding the synthetic pathway to obtain a bioinspired water-intercalated hydrogel of RGO nanosheets. Influential factors in the graphite oxidation reaction, typically the exothermic reaction temperature and hydrogen peroxide effect, are described. Furthermore, the chemical reaction of GO reduction using highly alkaline ammonia solution (pH 14) was investigated to produce hydrated RGO nanosheets assembled in a hydrogel structure (97% water). Three-dimensional assembly and water intercalation are key to preserve the non-stacking state of RGO nanosheets. Therefore, ultrasound transmission to aqueous channels in the macroscopic RGO hydrogel vibrated and dispersed the RGO nanosheets in water. Analytical results revealed the single-layer nanostructures, functional groups, optical band gaps, optimized C/O ratios, particle sizes and zeta potentials of GO and RGO nanosheets. The reversible self-assembly of RGO hydrogels is essential for many applications, such as RGO coatings and polymer/RGO nanocomposites. In a water purification application, the RGO hydrogel was dispersed in aqueous solution by simple agitation and showed a high capacity for organic dye adsorption. After the adsorption, the RGO/dye particles were easily removed by filtration through ordinary cellulose paper. The process of adsorption and filtration is effective and inexpensive for practical environmental remediation. In summary, a bioinspired structure of RGO hydrogel is conceptualized for prospective nanotechnology.

Catalytic system having an organotellurium ligand on graphene oxide: immobilization of Pd(0) nanoparticles and application in heterogeneous catalysis of cross-coupling reactions

First heterogeneous catalytic system, having a covalently linked hybrid bidentate organotellurium ligand [i.e., PhTe-CH2-CH2-NH2] on the surface of graphene oxide, has been synthesized with immobilized and stabilized Pd(0) nanoparticles. To the best of our knowledge, it is the first such catalytic system in which a heterogenized organotellurium ligand has been used. It has been well-characterized using different physicochemical characterization techniques viz. P-XRD, XPS, HR-TEM, EELS, FE-SEM, EDX, TGA, BET surface area analysis, FT-IR spectroscopy, and Raman spectroscopy. The Pd content of the final system has been quantified using ICP-OES. Its applications have been explored in Suzuki-Miyaura C-C cross coupling and C-O cross coupling reactions. Hot filtration experiments corroborate the heterogeneous nature of the catalysis. It is recyclable for up to five reaction cycles in Suzuki-Miyaura and C-O cross coupling with marginal loss in performance. It also catalyzes the reactions of chloroarenes such as chlorobenzene, 4-chloroaniline, 1-chloro-4-nitrobenzene, 4-chloroacetophenone, 4-chlorobenzophenone for Suzuki coupling, and 1-chloro-4-nitrobenzene, 4-chlorobenzonitrile, chlorobenzene, and 4-chlorotoluene for C-O coupling. P-XRD, FE-SEM, and EDX study reveals that the catalytic system retains its structural originality and functionality after recycling.

Electrochemical intercalation of anions into graphite: Fundamental aspects, material synthesis, and application to the cathode of dual-ion batteries

In this review, fundamental aspects of the electrochemical intercalation of anions into graphite have been first summarized, and then described the electrochemical preparation of covalent-type GICs and application of graphite as the cathode of dual-ion battery. Electrochemical overoxidation of anion GICs provides graphite oxide and covalent-fluorine GICs, which are key functional materials for various applications including energy storage devices. The reaction conditions to obtain fully oxidized graphite has been mentioned. Concerning the application of graphite for the cathode of dual-ion battery, it stably delivers about 110 mA h g-1 of reversible capacity in usual organic electrolyte solutions. The combination of anion and solvent as well as the concentration of the anions in the electrolyte solutions greatly affect the performance of graphite cathode such as oxidation potential, rate capability, cycling properties, etc. The interfacial phenomenon is also important, and fundamental studies of charge transfer resistance, anion diffusion coefficient, and surface film formation behavior have also been summarized. The use of smaller anions, such as AlCl4 -, Br- can increase the capacity of graphite cathode. Several efforts on the structural modification of graphite and development of electrolyte solutions in which graphite cathode delivers higher capacity were also described.

Helically twisted nanoribbons via stereospecific annulative π-extension reaction employing [7]helicene as a molecular wrench

Over the past decade, significant progress has been made in synthesizing atomically precise carbon nanostructures, particularly graphene nanoribbons (NRs), employing advanced synthetic methodologies. Despite these advancements, achieving control over the stereochemistry of twisted NRs has proven to be a formidable challenge. This manuscript presents a strategic approach to achieve absolute control over the single-handed helical conformation in a cove-edged NR. This strategy leverages enantiopure helicenes as a molecular wrench, intricately influencing the overall conformation of the NR. [7]helicenes stitched to the terminal K-regions of a conjugated pyrene NR through a stereospecific annulative π-extension reaction to produce a helically twisted NR with an end-to-end twist of 171°. Furthermore, a detailed investigation of the impact of twisting on the conformational population was studied by quantum chemical calculations.

Metal-free platforms for molecular thin films as high-performance supercapacitors

Controlling chemical functionalization and achieving stable electrode-molecule interfaces for high-performance electrochemical energy storage applications remain challenging tasks. Herein, we present a simple, controllable, scalable, and versatile electrochemical modification approach of graphite rods (GRs) extracted from low-cost Eveready cells that were covalently modified with anthracene oligomers. The anthracene oligomers with a total layer thickness of ∼24 nm on the GR electrode yield a remarkable specific capacitance of ∼670 F g-1 with good galvanostatic charge-discharge cycling stability (10 000) recorded in 1 M H2SO4 electrolyte. Such a boost in capacitance is attributed mainly to two contributions: (i) an electrical double-layer at the anthracene oligomer/GR/electrolyte interfaces, and (ii) the proton-coupled electron transfer (PCET) reaction, which ensures a substantial faradaic contribution to the total capacitance. Due to the higher conductivity of the anthracene films, it possesses more azo groups (-N[double bond, length as m-dash]N-) during the electrochemical growth of the oligomer films compared to pyrene and naphthalene oligomers, which is key to PCET reactions. AC-based electrical studies unravel the in-depth charge interfacial electrical behavior of anthracene-grafted electrodes. Asymmetrical solid-state supercapacitor devices were made using anthracene-modified biomass-derived porous carbon, which showed improved performance with a specific capacitance of ∼155 F g-1 at 2 A g-1 with an energy density of 5.8 W h kg-1 at a high-power density of 2010 W kg-1 and powered LED lighting for a longer period. The present work provides a promising metal-free approach in developing organic thin-film hybrid capacitors.

Covalent Organic Framework/Graphene Hybrids: Synthesis, Properties, and Applications

To address current energy crises and environmental concerns, it is imperative to develop and design versatile porous materials ideal for water purification and energy storage. The advent of covalent organic frameworks (COFs), a revolutionary terrain of porous materials, is underscored by their superlative features such as divinable structure, adjustable aperture, and high specific surface area. However, issues like inferior electric conductivity, inaccessible active sites impede mass transfer and poor processability of bulky COFs restrict their wider application. As a herculean stride forward, COF/graphene hybrids amalgamate the strengths of their constituent components and have in consequence, enticed significant scientific intrigue. Herein, the current progress on the structure and properties of graphene-based materials and COFs are systematically outlined. Then, synthetic strategies for preparing COF/graphene hybrids, including one-pot synthesis, ex situ synthesis, and in situ growth, are comprehensively reviewed. Afterward, the pivotal attributes of COF/graphene hybrids are dissected in conjunction with their multifaceted applications spanning adsorption, separation, catalysis, sensing, and energy storage. Finally, this review is concluded by elucidating prevailing challenges and gesturing toward prospective strides within the realm of COF/graphene hybrids research.

A Tape-Wrapping Strategy towards Electrochemical Fabrication of Water-Dispersible Graphene

Graphene has achieved mass production via various preparative routes and demonstrated its uniqueness in many application fields for its intrinsically high electron mobility and thermal conductivity. However, graphene faces limitations in assembling macroscopic structures because of its hydrophobic property. Therefore, balancing high crystal quality and good aqueous dispersibility is of great importance in practical applications. Herein, we propose a tape-wrapping strategy to electrochemically fabricate water-dispersible graphene (w-Gr) with both excellent dispersibility (~4.5 mg/mL, stable over 2 months), and well-preserved crystalline structure. A large production rate (4.5 mg/min, six times faster than previous electrochemical methods), high yield (65.4% ≤5 atomic layers) and good processability are demonstrated. A mechanism investigation indicates that the rational design of anode configuration to ensure proper oxidation, deep exfoliation and unobstructed mass transfer is responsible for the high efficiency of this strategy. This simple yet efficient electrochemical method is expected to promote the scalable preparation and applications of graphene.

A magnetically responsive photonic crystal of graphene oxide nanosheets

Magnetically responsive photonic crystals of colloidal nanosheets hold great promise for various applications. Here, we systematically investigated the magnetically responsive behavior of a photonic crystal consisting of graphene oxide (GO) nanosheets and water. After applying a 12 T magnetic field perpendicular and parallel to the observation direction, the photonic crystal exhibited a more vivid structural color and no structural color, respectively, based on the magnetic orientation of GO nanosheets. The reflection wavelength can be modulated by varying the GO concentration, and the peak intensity can be basically enhanced by increasing both the time and strength of the magnetic application. To improve color quality, we developed a novel approach of alternately applying a magnetic field to two orthogonal directions, instead of using a rotating magnetic field. Finally, we achieved color switching by changing the direction of applied magnetic fields.

Recent advances in the functionalization, substitutional doping and applications of graphene/graphene composite nanomaterials

Recently, graphene and graphene-based nanomaterials have emerged as advanced carbon functional materials with specialized unique electronic, optical, mechanical, and chemical properties. These properties have made graphene an exceptional material for a wide range of promising applications in biological and non-biological fields. The present review illustrates the structural modifications of pristine graphene resulting in a wide variety of derivatives. The significance of substitutional doping with alkali-metals, alkaline earth metals, and III-VII group elements apart from the transition metals of the periodic table is discussed. The paper reviews various chemical and physical preparation routes of graphene, its derivatives and graphene-based nanocomposites at room and elevated temperatures in various solvents. The difficulty in dispersing it in water and organic solvents make it essential to functionalize graphene and its derivatives. Recent trends and advances are discussed at length. Controlled reduction reactions in the presence of various dopants leading to nanocomposites along with suitable surfactants essential to enhance its potential applications in the semiconductor industry and biological fields are discussed in detail.

Towards sorptive eradication of pharmaceutical micro-pollutant ciprofloxacin from aquatic environment: A comprehensive review

Antibiotics are widely prioritized pharmaceuticals frequently adopted in medication for addressing numerous ailments of humans and animals. However, the non-judicious disposal of ciprofloxacin (CIP) with concentration levels exceeding threshold limit in an aqueous environment has been the matter of growing concern nowadays. CIP is found in various waterways with appreciable mobility due to its limited decay in solidified form. Hence, the effective eradication strategy of this non-steroidal anti-inflammatory antibiotic from aqueous media is pivotal for preventing the users and the biosphere from their hazardous impacts. Reportedly several customary techniques like reverse osmosis, precipitation, cross-filtration, nano-filtration, ion exchange, microbial remediation, and adsorption have been employed to eliminate CIP from water. Out of them, adsorption is ascertained to be a potential method because of lesser preliminary investment costs, ease of operation, greater efficiency, less energy usage, reduced chemical and biological slurry production, and ready availability of precursor materials. Towards remediation of ciprofloxacin-laden water, plenty of researchers have used different adsorbents. However, the present-day challenge is opting the promising sorbent and its application towards industrial scale-up which is vital to get reviewed. In this article, adsorbents of diverse origins are reviewed in terms of their performances in CIP removal. The review stresses the impact of various factors on sorptive assimilation of CIP, adsorption kinetics, isotherms, mechanism of ionic interaction, contrivances for CIP detection, cost estimation and reusability assessments of adsorbents also that may endorse the next-generation investigators to decide the efficacious, environmental appealing and cost-competitive adsorbents for effective riddance of CIP from wastewater.

Multiscale Structural Design of 2D Nanomaterials-based Flexible Electrodes for Wearable Energy Storage Applications

2D nanomaterials play a critical role in realizing high-performance flexible electrodes for wearable energy storge devices, owing to their merits of large surface area, high conductivity and high strength. The electrode is a complex system and the performance is determined by multiple and interrelated factors including the intrinsic properties of materials and the structures at different scales from macroscale to atomic scale. Multiscale design strategies have been developed to engineer the structures to exploit full potential and mitigate drawbacks of 2D materials. Analyzing the design strategies and understanding the working mechanisms are essential to facilitate the integration and harvest the synergistic effects. This review summarizes the multiscale design strategies from macroscale down to micro/nano-scale structures and atomic-scale structures for developing 2D nanomaterials-based flexible electrodes. It starts with brief introduction of 2D nanomaterials, followed by analysis of structural design strategies at different scales focusing on the elucidation of structure-property relationship, and ends with the presentation of challenges and future prospects. This review highlights the importance of integrating multiscale design strategies. Finding from this review may deepen the understanding of electrode performance and provide valuable guidelines for designing 2D nanomaterials-based flexible electrodes.

Applications of graphene oxide (GO) in oily wastewater treatment: Recent developments, challenges, and opportunities

The treatment of oily wastewater has become a serious environmental challenge, for which graphene oxide has emerged as a promising material in solving the problem. The ever-growing utilization of graphene oxide (GO) in the treatment of oily wastewater necessitates a constant review. This review article employs a comprehensive literature survey methodology, systematically examining peer-reviewed articles, focusing on, but not entirely limited to, the last five years. Major databases such as EBSCOhost, Scopus, ScienceDirect, Web of Science and Google Scholar were searched using specific keywords related to GO and oily wastewater treatment. The inclusion criteria focused on studies that specifically address the application, efficiency, and mechanisms of GO in treating oily wastewater. The data extracted from these sources were then synthesized to highlight the most important developments, challenges, and prospects in this field. As far as oily wastewater treatment is concerned, the majority of the studies revolve around the use of GO in mitigating fouling in membrane processes, improving the stability, capacity and reusability of sorbents, and enhancing photodegradation by minimizing charge recombination.

Rational Design of Stimuli-Responsive Inorganic 2D Materials via Molecular Engineering: Toward Molecule-Programmable Nanoelectronics

The ability of electronic devices to act as switches makes digital information processing possible. Succeeding graphene, emerging inorganic 2D materials (i2DMs) have been identified as alternative 2D materials to harbor a variety of active molecular components to move the current silicon-based semiconductor technology forward to a post-Moore era focused on molecule-based information processing components. In this regard, i2DMs benefits are not only for their prominent physiochemical properties (e.g., the existence of bandgap), but also for their high surface-to-volume ratio rich in reactive sites. Nonetheless, since this field is still in an early stage, having knowledge of both i) the different strategies for molecularly functionalizing the current library of i2DMs, and ii) the different types of active molecular components is a sine qua non condition for a rational design of stimuli-responsive i2DMs capable of performing logical operations at the molecular level. Consequently, this Review provides a comprehensive tutorial for covalently anchoring ad hoc molecular components-as active units triggered by different external inputs-onto pivotal i2DMs to assess their role in the expanding field of molecule-programmable nanoelectronics for electrically monitoring bistable molecular switches. Limitations, challenges, and future perspectives of this emerging field which crosses materials chemistry with computation are critically discussed.

Utilization of carbon-based nanomaterials for wastewater treatment and biogas enhancement: A state-of-the-art review

The management of environmental pollution and carbon dioxide (CO2) emissions is a challenge that has spurred increased research interest in determining sustainable alternatives to decrease biowaste. This state-of-the-art review aimed to describe the preparation and utilization of carbon-based nanomaterials (CNM) for biogas enhancement and wastewater contaminant (dyes, color, and dust particles) removal. The novelty of this review is that we elucidated that the performance of CNMs in the anaerobic digestion (AD) varies from one system to another. In addition, this review revealed that increasing the pyrolysis temperature can facilitate the transition from one CNM type to another and outlined the methods that can be used to develop CNMs, including arc discharge, chemical exfoliation, and laser ablation. In addition, this study showed that methane (CH4) yield can be slightly increased (e.g. from 33.6% to 60.89%) depending on certain CNM factors, including its type, concentration, and feedstock. Temperature is a fundamental factor involved in the method and carbon sources used for CNM synthesis. This review determined that graphene oxide is not a good additive for biogas and CH4 yield improvement compared with other types of CNM, such as graphene and carbon nanotubes. The efficacy of CNMs in wastewater treatment depends on the temperature and pH of the solution. Therefore, CNMs are good adsorbents for wastewater contaminant removal and are a promising alternative for CO2 emissions reduction. Further research is necessary to determine the relationship between CNM synthesis and preparation costs while accounting for other factors such as gas flow, feedstock, consumption time, and energy consumption.

A review of carbon nanomaterials/bacterial cellulose composites for nanomedicine applications

Carbon nanomaterials (CNMs) mainly include fullerene, carbon nanotubes, graphene, carbon quantum dots, nanodiamonds, and their derivatives. As a new type of material in the field of nanomaterials, it has outstanding physical and chemical properties, such as minor size effects, substantial specific surface area, extremely high reaction activity, biocompatibility, and chemical stability, which have attracted widespread attention in the medical community in the past decade. However, the single use of carbon nanomaterials has problems such as self-aggregation and poor water solubility. Researchers have recently combined them with bacterial cellulose to form a new intelligent composite material to improve the defects of carbon nanomaterials. This composite material has been widely synthesized and used in targeted drug delivery, biosensors, antibacterial dressings, tissue engineering scaffolds, and other nanomedicine fields. This paper mainly reviews the research progress of carbon nanomaterials based on bacterial cellulose in nanomedicine. In addition, the potential cytotoxicity of these composite materials and their components in vitro and in vivo was discussed, as well as the challenges and gaps that need to be addressed in future clinical applications.

"Click" Chemistry for the Functionalization of Graphene Oxide with Phosphorus Dendrons: Synthesis, Characterization and Preliminary Biological Properties

Two families of phosphorhydrazone dendrons having either an azide or an alkyne linked to the core and diverse types of pyridine derivatives as terminal functions have been synthesized and characterized. These dendrons were grafted via click reaction to graphene oxide (GO) functionalized with either alkyne or azide functions, respectively. The resulting modified-GO and GO-dendrons materials have been characterized by Fourier Transform Infrared (FTIR), Raman spectroscopy (RS), and Magic Angle Spinning Nuclear Magnetic Resonance (MAS NMR) analyses. In addition, the free dendrons and the dendrons grafted to GO were tested toward cancerous (HCT116) and non-cancerous (RPE1) cell lines.

A comparative investigation of the chemical reduction of graphene oxide for electrical engineering applications

The presence of oxygen-containing functional groups on the basal plane and at the edges endows graphene oxide (GO) with an insulating nature, which makes it rather unsuitable for electronic applications. Fortunately, the reduction process makes it possible to restore the sp2 conjugation. Among various protocols, chemical reduction is appealing because of its compatibility with large-scale production. Nevertheless, despite the vast number of reported chemical protocols, their comparative assessment has not yet been the subject of an in-depth investigation, rendering the establishment of a structure-performance relationship impossible. We report a systematic study on the chemical reduction of GO by exploring different reducing agents (hydrazine hydrate, sodium borohydride, ascorbic acid (AA), and sodium dithionite) and reaction times (2 or 12 hours) in order to boost the performance of chemically reduced GO (CrGO) in electronics and in electrochemical applications. In this work, we provide evidence that the optimal reduction conditions should vary depending on the chosen application, whether it is for electrical or electrochemical purposes. CrGO exhibiting a good electrical conductivity (>1800 S m-1) can be obtained by using AA (12 hours of reaction), Na2S2O4 and N2H4 (independent of the reaction time). Conversely, CrGO displaying a superior electrochemical performance (specific capacitance of 211 F g-1, and capacitance retention >99.5% after 2000 cycles) can be obtained by using NaBH4 (12 hours of reaction). Finally, the compatibility of the different CrGOs with wearable and flexible electronics is also demonstrated using skin irritation tests. The strategy described represents a significant advancement towards the development of environmentally friendly CrGOs with ad hoc properties for advanced applications in electronics and energy storage.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

Simultaneous Regulation of Surface Properties and Microstructure of Graphene Oxide Membranes for Enhanced Nanofiltration Performance

The surface properties and microstructure of graphene oxide (GO)-based membranes are both crucial for enhanced nanofiltration performance. Herein, a GO nanofiltration membrane is fabricated with regulatable surface properties and microstructure via a facile two-step impregnation in KOH and following HCl aqueous solutions. The type and number of oxygen-containing groups in GO membranes change with fewer C-O-C/C-OH and C═O but more COOH groups, and they are readily regulated by alkaline treatment time, which enables enhanced surface hydrophilicity and larger surface ζ potentials. Meanwhile, a few tiny defects are present in the GO sheets, which could increase the number of pores and decrease the length of water nanochannels. Such surface properties and microstructure together determine the excellent nanofiltration performance of the GO membranes with fast and selective water permeation, e.g., ∼99.5% rejection toward CBB G250 and flux of 56.9 ± 1.0 L m-2 h-1. This work provides insights into the design of high-performance two-dimensional laminar membranes.

Assessing the evolution of oxygenated functional groups on the graphene oxide surface upon mild thermal annealing in water

Graphene oxide (GO) is known to be a 2D metastable nanomaterial that can be reconstructed under thermal annealing into distinct oxidized and graphitic phases. Up to now, such phase transformation, mainly related to epoxide and hydroxyl functional groups, has been usually achieved by thermally treating layers of GO in the solid state. Here, we present the mild annealing of GO dispersed in an aqueous medium, performed at two temperatures, 50 °C and 80 °C, for different intervals of time. We show experimental evidences of the epoxide instability in the presence of water by means of XPS, cyclic voltammetry and Raman spectroscopy, demonstrating the reorganization of epoxide and hydroxyl moieties initiated by water molecules. In fact, at 50 °C an increase in oxygen content is detected in all annealed samples compared to untreated GO, with a transformation of epoxide groups into vicinal diols. On the other hand, at 80 °C the oxygen content decreases towards the initial value since the vicinal diols, previously formed, transform into single hydroxyls and C[double bond, length as m-dash]C bonds. Moreover, the higher temperature annealing likely favours oxygenated functional groups rearrangements and clustering, in accordance with the literature, leading to a higher electron affinity and conductivity of the graphenic network.

Studies on the effect of polylactide in-situ grafting during melt processing on poly(ʟ-lactide)/graphene oxide composite films

The present work tried to solve the compatibility and dispersion problems of industrial grade graphene oxide (GO) mixing with polylactide (PLA) by melt processing for practical application. PLA was grafted on the GO using the silane coupling agent (KH560) as "bridge" by in-situ melting reaction to improve the compatibility. For better compatibility and dispersion, poly(ᴅ-lactide) (PDLA) was grafted on GO (D-G) to form stereocomplex crystallites with poly(ʟ-lactide) (PLLA) to enhance the interaction between GO and PLLA matrix. By biaxial stretching, the PLLA and GO composite films were prepared. Results show that GO was seriously aggregated in the film containing GO without PLA grafting (PLLA/L/G0.05) and the average size of aggregated GO was about 19.5 μm. PLA grafting decreased the aggregated GO size, so that the films containing L-G or D-G presented better dispersion. The film containing 5 % D-G (PLLA/D-G0.05) exhibited the smallest average size of aggregated GO, about 12.7 μm. Compared with neat PLLA film, PLLA/L/G0.05 film presented worse tensile properties due to serious aggregation of GO. While, PLLA/D-G0.05 film presented the best tensile performance that tensile strength and elongation at break reached 120 MPa and 107 %, respectively.

Phase Engineering and Synchrotron-Based Study on Two-Dimensional Energy Nanomaterials

In recent years, there has been significant interest in the development of two-dimensional (2D) nanomaterials with unique physicochemical properties for various energy applications. These properties are often derived from the phase structures established through a range of physical and chemical design strategies. A concrete analysis of the phase structures and real reaction mechanisms of 2D energy nanomaterials requires advanced characterization methods that offer valuable information as much as possible. Here, we present a comprehensive review on the phase engineering of typical 2D nanomaterials with the focus of synchrotron radiation characterizations. In particular, the intrinsic defects, atomic doping, intercalation, and heterogeneous interfaces on 2D nanomaterials are introduced, together with their applications in energy-related fields. Among them, synchrotron-based multiple spectroscopic techniques are emphasized to reveal their intrinsic phases and structures. More importantly, various in situ methods are employed to provide deep insights into their structural evolutions under working conditions or reaction processes of 2D energy nanomaterials. Finally, conclusions and research perspectives on the future outlook for the further development of 2D energy nanomaterials and synchrotron radiation light sources and integrated techniques are discussed.

Countercation Engineering of Graphene-Oxide Nanosheets for Imparting a Thermoresponsive Ability

Graphene-oxide (GO) nanosheets, which are oxidized derivatives of graphene, are regarded as promising building blocks for functional soft materials. Especially, thermoresponsive GO nanosheets have been widely employed to develop smart membranes/surfaces, hydrogel actuators, recyclable systems, and biomedical applications. However, current synthetic strategies to generate such thermoresponsive GO nanosheets have exclusively relied on the covalent or non-covalent modification of their surfaces with thermoresponsive polymers, such as poly(N-isopropylacrylamide). To impart a thermoresponsive ability to GO nanosheets themselves, we focused on the countercations of the carboxy and acidic hydroxy groups on the GO nanosheets. In this study, we established a general and reliable method to synthesize GO nanosheets with target countercations and systematically investigated their effects on thermoresponsive behaviors of GO nanosheets. As a result, we discovered that GO nanosheets with Bu4N+ countercations became thermoresponsive in water without the use of any thermoresponsive polymers, inducing a reversible sol-gel transition via their self-assembly and disassembly processes. Owing to the sol-gel transition capability, the resultant dispersion can be used as a direct writing ink for constructing a three-dimensionally designable gel architecture of the GO nanosheets. Our concept of "countercation engineering" can become a new strategy for imparting a stimuli-responsive ability to various charged nanomaterials for the development of next-generation smart materials.

Revealing the Chemical Nature of Functional Groups on Graphene Oxide by Integrating Potentiometric Titration and Ab Initio Calculations

A new graphene oxide (GO) model with reasonable functional group types and distribution modes was proposed by integrating potentiometric titrations and ab initio calculations. Due to the complex synthesis mechanism, the atomic structure of GO has been controversial for a long time. Here, we use density functional theory calculations to mimic the oxidation process, and a series of GO fragments (GOFs) were deduced. A new pK_a calculation method (RCDPKA) developed specifically in this work was further used to predict pK_a values of the fragments. Then, we performed potentiometric titrations on four different GO samples to confirm the existence of these GOFs and determine the content of functional groups. Interestingly, different GO samples present the same pK_a values in titration, and the results are consistent with the predicted ones. Based on the evidence from titration and calculation, prominent correlations between functional groups could be found. Groups at the edges are mainly double-interactive carboxyls (pK_a1 ≈ 3.4, pK_a2 ≈ 5.7) and double-adjacent phenolic hydroxyls (pK_a1 ≈ 8.8, pK_a2 ≈ 12.1), while groups on the plane are mainly collocated epoxies and hydroxyls (pK_a1 ≈ 11.1, pK_a2 ≈ 13.8) on both sides of the plane with a meta-positional hydrogen bond interaction. These findings were further validated by multiple characterizations and GO modifications. These results not only stimulate a fundamental understanding of the GO structure but also provide a quantitative analysis method for functional groups on GO.

Nanostructures for prevention, diagnosis, and treatment of viral respiratory infections: from influenza virus to SARS-CoV-2 variants

Viruses are a major cause of mortality and socio-economic downfall despite the plethora of biopharmaceuticals designed for their eradication. Conventional antiviral therapies are often ineffective. Live-attenuated vaccines can pose a safety risk due to the possibility of pathogen reversion, whereas inactivated viral vaccines and subunit vaccines do not generate robust and sustained immune responses. Recent studies have demonstrated the potential of strategies that combine nanotechnology concepts with the diagnosis, prevention, and treatment of viral infectious diseases. The present review provides a comprehensive introduction to the different strains of viruses involved in respiratory diseases and presents an overview of recent advances in the diagnosis and treatment of viral infections based on nanotechnology concepts and applications. Discussions in diagnostic/therapeutic nanotechnology-based approaches will be focused on H1N1 influenza, respiratory syncytial virus, human parainfluenza virus type 3 infections, as well as COVID-19 infections caused by the SARS-CoV-2 virus Delta variant and new emerging Omicron variant.

Magnetic tubular nickel@silica-graphene nanocomposites with high preconcentration capacity for organothiophosphate pesticide removal in environmental water: Fabrication, magnetic solid-phase extraction, and trace detection

Organothiophosphate pesticides (OPPs) are the most common water contaminants, significantly endangering human health and bringing serious public safety issues. Thus, developing effective technologies for the removal or trace detection of OPPs from water is urgent. Herein, a novel graphene-based silica-coated core-shell tubular magnetic nanocomposite (Ni@SiO₂-G) was fabricated for the first time and used for the efficient magnetic solid-phase extraction (MSPE) of the OPPs chlorpyrifos, diazinon, and fenitrothion from environmental water. The experimental factors affecting extraction efficiency such as adsorbent dosage, extraction time, desorption solvent, desorption mode, desorption time, and adsorbent type were evaluated. The synthesized Ni@SiO₂-G nanocomposites showed a higher preconcentration capacity than the Ni nanotubes, Ni@SiO₂ nanotubes, and graphene. Under the optimized conditions, 5 mg of tubular nano-adsorbent displayed good linearity within the range of 0.1-1 μg·mL^-1, low limits of detection (0.04-0.25 pg·mL^-1), low limits of quantification (0.132-0.834 pg·mL^-1), good reusability (n = 5; relative standard deviations between 1.46% and 9.65%), low dosage (5 mg), and low real detection concentration (< 3.0 ng·mL^-1). Moreover, the possible interaction mechanism was investigated by density functional theory calculation. Results showed that Ni@SiO₂-G was a potential magnetic material for the preconcentration and extraction of formed OPPs at ultra-trace levels from environmental water.

Spatially Controlled Aryl Radical Grafting of Graphite Surfaces Guided by Self-Assembled Molecular Networks of Linear Alkane Derivatives: The Importance of Conformational Dynamics

The covalent functionalization of carbon surfaces with nanometer-scale precision is of interest because of its potential in a range of applications. We herein report the controlled grafting of graphite surfaces using electrochemically generated aryl radicals templated by self-assembled molecular networks (SAMNs) of bisalkylurea derivatives. A bisalkylurea derivative having two butoxy units acts as a template for the covalent functionalization of aryl groups in between self-assembled rows of this molecule. In contrast, grafting occurs without a spatial order when an SAMN of bis(tetradecyl)urea was used as a template. This indicates that a degree of dynamics at the alkyl termini is required to favor controlled covalent attachment, a situation that is suppressed by strong intrarow intermolecular interactions resulting from the hydrogen bonding of the urea groups, but favored by terminal short alkoxy groups. The present information is useful for understanding the mechanism of the template-guided aryl radical grafting and the molecular design of new generations of template molecules.

Facilitation of Dye-Based Quantitative Real-Time Polymerase Chain Reaction with Poly(ethylene glycol)-Engrafted Graphene Oxide

Quantitative real-time polymerase chain reaction (qPCR) is an important and extensively utilized technique in medical and biotechnological applications. qPCR enables the real-time detection of nucleic acid during amplification, thus surpassing the necessity of post-amplification gel electrophoresis for amplicon detection. Despite being widely employed in molecular diagnostics, qPCR exhibits limitations attributed to nonspecific DNA amplification that compromises the efficiency and fidelity of qPCR. Herein, we demonstrate that poly(ethylene glycol)-engrafted nanosized graphene oxide (PEG-nGO) can significantly improve the efficiency and specificity of qPCR by adsorbing single-stranded DNA (ssDNA) without affecting the fluorescence of double-stranded DNA binding dye during DNA amplification. PEG-nGO adsorbs surplus ssDNA primers in the initial phase of PCR, having lower concentrations of DNA amplicons and thus minimizing the nonspecific annealing of ssDNA and false amplification due to primer dimerization and erroneous priming. As compared to conventional qPCR, the addition of PEG-nGO and the DNA binding dye, EvaGreen, in the qPCR setup (dubbed as PENGO-qPCR) significantly enhances the specificity and sensitivity of DNA amplification by preferential adsorption of ssDNA without inhibiting DNA polymerase activity. The PENGO-qPCR system for detection of influenza viral RNA exhibited a 67-fold higher sensitivity than the conventional qPCR setup. Thus, the performance of a qPCR can be greatly enhanced by adding PEG-nGO as a PCR enhancer as well as EvaGreen as a DNA binding dye to the qPCR mixture, which exhibits a significantly improved sensitivity of the qPCR.

Polymer/Graphene Nanocomposites via 3D and 4D Printing—Design and Technical Potential

Graphene is an important nanocarbon nanofiller for polymeric matrices. The polymer–graphene nanocomposites, obtained through facile fabrication methods, possess significant electrical–thermal–mechanical and physical properties for technical purposes. To overcome challenges of polymer–graphene nanocomposite processing and high performance, advanced fabrication strategies have been applied to design the next-generation materials–devices. This revolutionary review basically offers a fundamental sketch of graphene, polymer–graphene nanocomposite and three-dimensional (3D) and four-dimensional (4D) printing techniques. The main focus of the article is to portray the impact of 3D and 4D printing techniques in the field of polymer–graphene nanocomposites. Polymeric matrices, such as polyamide, polycaprolactone, polyethylene, poly(lactic acid), etc. with graphene, have been processed using 3D or 4D printing technologies. The 3D and 4D printing employ various cutting-edge processes and offer engineering opportunities to meet the manufacturing demands of the nanomaterials. The 3D printing methods used for graphene nanocomposites include direct ink writing, selective laser sintering, stereolithography, fused deposition modeling and other approaches. Thermally stable poly(lactic acid)–graphene oxide nanocomposites have been processed using a direct ink printing technique. The 3D-printed poly(methyl methacrylate)–graphene have been printed using stereolithography and additive manufacturing techniques. The printed poly(methyl methacrylate)–graphene nanocomposites revealed enhanced morphological, mechanical and biological properties. The polyethylene–graphene nanocomposites processed by fused diffusion modeling have superior thermal conductivity, strength, modulus and radiation- shielding features. The poly(lactic acid)–graphene nanocomposites have been processed using a number of 3D printing approaches, including fused deposition modeling, stereolithography, etc., resulting in unique honeycomb morphology, high surface temperature, surface resistivity, glass transition temperature and linear thermal coefficient. The 4D printing has been applied on acrylonitrile-butadiene-styrene, poly(lactic acid) and thermosetting matrices with graphene nanofiller. Stereolithography-based 4D-printed polymer–graphene nanomaterials have revealed complex shape-changing nanostructures having high resolution. These materials have high temperature stability and high performance for technical applications. Consequently, the 3D- or 4D-printed polymer–graphene nanocomposites revealed technical applications in high temperature relevance, photovoltaics, sensing, energy storage and other technical fields. In short, this paper has reviewed the background of 3D and 4D printing, graphene-based nanocomposite fabrication using 3D–4D printing, development in printing technologies and applications of 3D–4D printing.

Hydrogen-Enhanced Catalytic Conversion of Amorphous Carbon to Graphene for Achieving Superlubricity

The solid-state conversion of amorphous carbon into graphene is extremely difficult, but it can be achieved in the friction experiments that induce macroscale superlubricity. However, the underlying conversion mechanisms remain elusive. Here, the friction experiments with Cu nanoparticles and (non-hydrogen (H) or H) a-C in vacuum, show the H-induced conversion of mechanical to chemical wear, resulting in the a-C's tribosoftening and nanofragmentating that produce hydrocarbon nanoclusters or molecules. It is such exactly hydrocarbon species that yield graphene at hydrogen-rich a-C friction interface, through reaction of them with Cu nanoparticles. In comparison, graphene isn't formed at Cu/non-H a-C friction interface. Atomistic simulations reveal the hydrogen-enhanced tribochemical decomposition of a-C and demonstrate the energetically favorable graphitization transformation of hydrocarbons on Cu substrates. The findings are of importance to achieve solid-state transformation between different carbon allotropes and provide a good strategy to synthesize other graphitic encapsulated catalysts with doped elements.

Improved Strength and Heat Distortion Temperature of Emi-Aromatic Polyamide 10T-co-1012 (PA10T/1012)/GO Composites via In Situ Polymerization

In this paper, an effective method for preparing poly (p-phenylene terephthalamide) -co- poly (dodecanedioyl) decylamine (PA10T/1012)/graphene oxide (GO) composites by pre-dispersion and one-step in situ polymerization was proposed for the first time. During the process of polycondensation, the condensation between the terminal amino groups of PA10T/1012 chains and the oxygen-containing functional groups of GO allowed nylon to be grafted onto graphene sheets. The effects of polymer grafting on the thermal and mechanical properties of (PA10T/1012)/GO composites were studied in detail. Due to the interaction between PA10T/1012 grafted graphene sheets and its matrix, GO is well dispersed in the PA10T/1012 matrix and physically entangled with it, forming a cross-linked network structure of polymer bridged graphene, thus obtaining enhanced tensile strength, tensile modulus and impact strength. More importantly, benefiting from the cross-linked network structure, the heat distortion temperature (HDT) of the composite is greatly increased from 77.3 °C to 144.2 °C. This in situ polycondensation method opens a new avenue to prepare polycondensate graphene-based composites with high strength and high heat distortion temperatures.

Appraising the electrocatalytic performance of beta-cyclodextrin embellished supramolecular recognition system for pernicious food colorants

The current research presents the evaluation of supramolecular proficiency of the designed platform for electrocatalytic determination of pernicious food colorants, amaranth and fast green. The approach involving surface modification of glassy carbon electrode with beta cyclodextrin decorated strontium ferrite reduced graphene oxide nanocomposite (SFrGO-βCD) to ensure fast and reversible electro-oxidation of hydroxyl groups of the colorant molecules. The synergy between SF and rGO facilitated the sensor with enhanced surface area and conductivity through faradic redox reaction. Tremendous decrease in the obtained values of peak separation potential and impedance as manifested in CV and EIS analysis, enabled by electrostatic interactions between surface functionalities of rGO and βCD has resulted in the significant augmentation of sensitivity. The value of charge transfer coefficient, number of electrons involved, nature of electron transport process at electrode electrolyte interface during the analysis of electrochemical detection were explored through CV experiments. Food samples analysis (without spiking) utilizing screen printed electrode manifested the sensor as portable device for real time monitoring. Outstanding detection limit (0.022 nM for amaranth and 0.051 nM for fast green), excellent regenerability (Relative standard deviation less than 3%) and apparent recovery rate (above 90%) of the modified electrode presented a colossal potential for the development of sustainable and commercially competitive electrochemical sensor in food sector.

One-pot carboxyl enrichment fosters water-dispersibility of reduced graphene oxide: a combined experimental and theoretical assessment

Graphene, one of the allotropic forms of carbon, has attracted enormous interest in the last few years due to its unique properties. Reduced graphene oxide (RGO) is known as the nanomaterial most similar to graphene in terms of electronic, chemical, mechanical, and optical properties. It is prepared from graphene oxide (GO) in the presence of different types of reducing agents. Nevertheless, the application of RGO is still limited, owing to its tendency to irreversibly aggregate in an aqueous medium. Herein, we disclosed the preparation of water-dispersible RGO from GO previously enriched with additional carboxyl functional groups through a one-pot reaction, followed by chemical reduction. This novel and unprecedentedly reported reactivity of GO toward the acylating agent succinic anhydride (SA) was experimentally investigated through XPS, Raman, FT-IR, and UV-Vis, and corroborated by DFT calculations, which have shown a peculiar involvement in the functionalization reaction of both epoxide and hydroxyl functional groups. This proposed synthetic protocol avoids use of sodium cyanide, previously reported for carboxylation of graphene, and focuses on the sustainable and scalable preparation of a water-dispersible RGO, paving the way for its application in many fields where the colloidal stability in aqueous medium is required.

High-Performance Integrated rGO-[Polymeric Ionic Liquid] [Heteropolyanions] for Catalytic Degradation of Azo Dyes

Polymeric ionic liquid (such as poly[ViEtIm]Br)-modified reduced graphene oxide (rGO), rGO-poly[ViEtIm]Br, was nominated as an open carrier to construct a degradation platform. The large specific surface of rGO together with the anion-exchange property of poly[ViEtIm]Br terminals led to the wide growth of heteropolyanions (like [PW₁₂O₄₀]^3-, [PMo₁₂O₄₀]^3-, and [SiW₁₂O₄₀]^4-), thus assembling the integrated catalyst rGO-poly[ViEtIm][heteropolyanions]. The grafted poly[ViEtIm]Br provided an anchor point to interlink the polar heteropolyanions and the nonpolar rGO substrate, endowing this graphene-based catalyst with excellent dispersibility. The adequate exposure of heteropolyanions further promoted the decolorization capability during the degradation procedure. Morphology, structure, and properties of materials were confirmed and monitored via transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible (UV-vis) spectroscopy, etc. rGO-poly[ViEtIm][PW₁₂O₄₀] was selected as the optimal catalyst with degradation efficiency toward methyl orange reaching 98.7% in 3 h. In addition, the excellent structural stability of the catalyst improved the decolorization efficiency, which reached 95% after recycling five times.

Graphene-Based Nanocomposites as Antibacterial, Antiviral and Antifungal Agents

Over the past decade, there have been many interesting studies in the scientific literature about the interaction of graphene-based polymeric nanocomposites with microorganisms to tackle antimicrobial resistance. These studies have reported variable intensities of biocompatibility and selectivity for the nanocomposites toward a specific strain, but it is widely believed that graphene nanocomposites have antibacterial, antiviral, and antifungal activities. Such antibacterial activity is due to several mechanisms by which graphene nanocomposites can act on cells including stimulating oxidative stress; disrupting membranes due to sharp edges; greatly changing core structure mechanical strength and coarseness. However, the underlying mechanisms of graphene nanocomposites as antiviral and antifungal agents remain relatively scarce. In this review, recent advances in the synthesis, functional tailoring, and antibacterial, antiviral, and antifungal applications of graphene nanocomposites are summarized. The synthesis of graphene materials and graphene-based polymeric nanocomposites with techniques such as pressurized gyration, electrospinning, chemical vapor deposition, and layer-by-layer self-assembly is first introduced. Then, the antimicrobial mechanisms of graphene membranes are presented and demonstrated typical in vitro and in vivo studies on the use of graphene nanocomposites for antibacterial, antiviral, and antifungal applications. Finally, the review describes the biosafety, current limitations, and potential of antimicrobial graphene-based nanocomposites.

The Electronic Origin of the Zeta Potential is Supported by the Redox Mechanism on an Aqueous Dispersion of Exfoliated Graphite

Herein we have proposed that a redox mechanism can produce surface charges and negative zeta potential on an aqueous graphite dispersion. Graphite was kept in contact with a concentrated ammonia aqueous solution, washed, and exfoliated in water, resulting in a dispersion with lyophobic nature. Ammonia treatment did not provide functional groups or nitrogen doping to graphite. Moreover, this material was washed twice before sonication to remove most hydroxide. Therefore, neither functional groups, nitrogen atoms, nor hydroxide excess is responsible for the zeta potential. Kelvin probe force microscopy has shown that the ammonia-treated and exfoliated graphite has higher Fermi level than the water-treated material, indicating that the contact between ammonia and graphite promotes redox reactions that provide electrons to graphite. These electrons raise the Fermi level of graphite and generate the negative zeta potential, consequently, they account for the colloidal stability.

Anti-Infective and Toxicity Properties of Carbon Based Materials: Graphene and Functionalized Carbon Nanotubes

Recently, antimicrobial activities of various carbon-based nanomaterials against specific pathogens have become one of the most significant research interests in this field. Carbon nanotubes (CNTs) are promising multidisciplinary nanostructures in biomedicine, drug delivery, genetic engineering, biosensors, and artificial implants. However, the biomedical administration of CNTs is dependent on their solubility, toxicity, and biocompatibility, as well as novel drug-delivery applications through optimization of the drug's loading capacity, cellular absorption, and continuous release within the target cell. The usage of CNTs and Graphene materials as antimicrobial agents and nanocarriers for antibiotics delivery would possibly improve their bioavailability and facilitate better anti-infective therapy. However, it is worth mentioning that CNTs' antimicrobial activity and toxicity are highly dependent on their preparation and synthesis method. Various types of research have confirmed that diameter, length, residual catalyst, metal content, surface coating, electronic structure, and dispersibility would affect CNTs' toxicity toward bacteria and human cells. In this review article, a general study was performed on the antimicrobial properties of carbon-based nanomaterials, as well as their toxicity and applications in confronting different microorganisms. This study could be useful for researchers who are looking for new and effective drug delivery methods in the field of microbial resistance.