Efficient Disproportionation of Formic Acid to Methanol Using Molecular Ruthenium Catalysts

Hydrogen Production through Distinctive C-C Cleavage during Acetic Acid Reforming at Low Temperature

Acetic acid reforming is a green method for sustainable hydrogen production owing to its renewable source from biomass conversion. However, conventional acetic acid reforming would produce various byproducts, including CO, CH4 and so on. Here, we develop a distinctive method for selective hydrogen production from C-C directional cleavage during acetic acid reforming. Completely different from conventional acetic acid reforming process, acetic acid would react with water over organoruthenium catalyst during its C-C cleavage at low temperature, then produce methanol and formic acid (CH3COOH+H2O→CH3OH+HCOOH). Lastly, methanol and formic acid could further decompose into hydrogen and carbon dioxide over organoruthenium selectively. As a result, there is little CO and CH4 produced in the first step of C-C bond cleavage during acetic acid reforming at 100 °C. Hydrogen production rate is up to 26.8 molH2/(h-1*mol-1 Ru) at 150 °C through a tandem catalysis. A mechanism for C-C cleavage of acetic acid is proposed based on intermediate product analysis and density functional theory (DFT) calculation. Firstly, the C-C single bond was transformed into C=C double bond by dropping one H atom to organoruthenium. Then the coming H2O molecule reacted with the C=C bond by an addition reaction, forming methanol and formic acid. This research not only proposes distinctive reaction pathway for hydrogen production from acetic acid reforming, but also provides some inspiration for selective C-C bond cleavage during ethanol reforming.

Ruthenium-Catalyzed Selective Mono N-Ethylation of Arylamines and Tandem Reduction/N-Ethylation of Nitroarenes Using Triethylamine and Formic Acid

The mono N-alkylation of arylamines using alkylamines as alkyl group donors has been scarcely investigated. In this work, we report the mono N-alkylation of several arylamines (52-95%) catalyzed by the complex ruthenium-triphos in the presence of Al(OTf)3. Moreover, the highly reductant ability of the catalyst system allows the tandem reduction/N-alkylation of nitrobenzenes in good yields (up to 80%). In addition, the catalyst can be recycled after three reaction cycles without loss of catalyst activity.

Ru(II)-Catalyzed Synthesis of Fused Imidazo[1,2-a]pyridine-chromenones and Methylene-Tethered Bis-imidazo[1,2-a]pyridines and Regioselective O-Acetoxylation of Imidazo[1,2-a]pyridines

Herein, we disclose an unprecedented protocol via ruthenium-catalyzed annulation for the synthesis of 6H-chromeno[4',3':4,5]imidazo[1,2-a]pyridin-6-one, and functionalized 2-(3-formylimidazo[1,2-a]pyridin-2-yl)phenyl acetate has been revealed by intramolecular chelation-assisted C-H activation. Additionally, a one-pot approach for creating bis(2-phenylimidazo[1,2-a]pyridin-3-yl)methane (BIP) has been realized through ruthenium catalysis with the use of formic acid. This method was used in gram-scale synthesis of BIP and step-economical late-stage functionalization of a marketed drug, zolimidine, in good yield.

Catalytic reduction of carbon dioxide by a zinc hydride compound, [Tptm]ZnH, and conversion to the methanol level

The zinc hydride compound, [Tptm]ZnH, may achieve the reduction of CO₂ by (RO)₃SiH (R = Me, Et) to the methanol oxidation level, (MeO)_xSi(OR)_4-x, via the formate species, HCO₂Si(OR)₃. However, because insertion of CO₂ into the Zn-H bond is more facile than insertion of HCO₂Si(OR)₃, conversion of HCO₂Si(OR)₃ to the methanol level only occurs to a significant extent in the absence of CO₂.

Recent progress in homogeneous hydrogenation of carbon dioxide to methanol

The requirement of running a new generation of fuel production is inevitable due to the limitation of oil production from reservoirs. On the other hand, enhancing the CO2 concentration in the atmosphere brings global warming phenomenon and leads to catastrophic disasters such as drought and flooding. Conversion of carbon dioxide to methanol can compensate for the liquid fuel requirement and mitigate CO2 emissions to the atmosphere. In this review, we surveyed the recent works on homogeneous hydrogenation of CO2 to CH3OH and investigated the experimental results in detail. We categorized the CO2 hydrogenation works based on the environment of the reaction, including neutral, acidic, and basic conditions, and discussed the effects of solvents’ properties on the experimental results. This review provides a perspective on the previous studies in this field, which can assist the researchers in selecting the proper catalyst and solvent for homogenous hydrogenation of carbon dioxide to methanol.

Homogeneous Catalysis for Sustainable Energy: Hydrogen and Methanol Economies, Fuels from Biomass, and Related Topics

As the world pledges to significantly cut carbon emissions, the demand for sustainable and clean energy has now become more important than ever. This includes both production and storage of energy carriers, a majority of which involve catalytic reactions. This article reviews recent developments of homogeneous catalysts in emerging applications of sustainable energy. The most important focus has been on hydrogen storage as several efficient homogeneous catalysts have been reported recently for (de)hydrogenative transformations promising to the hydrogen economy. Another direction that has been extensively covered in this review is that of the methanol economy. Homogeneous catalysts investigated for the production of methanol from CO2, CO, and HCOOH have been discussed in detail. Moreover, catalytic processes for the production of conventional fuels (higher alkanes such as diesel, wax) from biomass or lower alkanes have also been discussed. A section has also been dedicated to the production of ethylene glycol from CO and H2 using homogeneous catalysts. Well-defined transition metal complexes, in particular, pincer complexes, have been discussed in more detail due to their high activity and well-studied mechanisms.

HCOOH disproportionation to MeOH promoted by molybdenum PNP complexes

Molybdenum(0) complexes with aliphatic aminophosphine pincer ligands have been prepared which are competent for the disproportionation of formic acid, thus representing the first example so far reported of non-noble metal species to catalytically promote such transformation. In general, formic acid disproportionation allows for an alternative access to methyl formate and methanol from renewable resources. MeOH selectivity up to 30% with a TON of 57 could be achieved while operating at atmospheric pressure. Selectivity (37%) and catalyst performance (TON = 69) could be further enhanced when the reaction was performed under hydrogen pressure (60 bars). A plausible mechanism based on experimental evidence is proposed.

Mo(0) complexes with aliphatic PNP-pincer ligands enable the first example of non-noble metal catalyzed formic acid disproportionation leading to methanol with a selectivity of up to 37% and a turnover number up to 69.

Acid-assisted hydrogenation of CO2 to methanol using Ru(II) and Rh(III) RAPTA-type catalysts under mild conditions

A highly efficient homogeneous catalyst system for production of CH3OH from CO2 using single molecular defined ruthenium and rhodium RAPTA-type catalysts [Ru(η6-p-cymene)X2(PTA)] (X = I(1), Cl(2); PTA = 1,3,5-triaza-7-phosphaadamantane) and rhodium catalysts [Rh(η5-C5Me5)X2(PTA/PTA-BH3)] (X = Cl(3), H(4) and PTA-BH3, H(5)) developed in acidic media under mild conditions. A TON of 4752 is achieved using a [Ru(η6-p-cymene)I2(PTA)] catalyst which represents the first example of CO2 hydrogenation to CH3OH using single molecular defined Ru and Rh RAPTA-type catalysts.

A General Regioselective Synthesis of Alcohols by Cobalt-Catalyzed Hydrogenation of Epoxides

A straightforward methodology for the synthesis of anti-Markovnikov-type alcohols is presented. By using a specific cobalt triphos complex in the presence of Zn(OTf)2 as an additive, the hydrogenation of epoxides proceeds with high yields and selectivities. The described protocol shows a broad substrate scope, including multi-substituted internal and terminal epoxides, as well as a good functional-group tolerance. Various natural-product derivatives, including steroids, terpenoids, and sesquiterpenoids, gave access to the corresponding alcohols in moderate-to-excellent yields.

Catalytic Disproportionation of Formic Acid to Methanol by using Recyclable Silylformates

A novel strategy to prepare methanol from formic acid without an external reductant is presented. The overall process described herein consists of the disproportionation of silyl formates to methoxysilanes, catalyzed by ruthenium complexes, and the production of methanol by simple hydrolysis. Aqueous solutions of MeOH (>1 mL, >70 % yield) were prepared in this manner. The sustainability of the reaction has been established by recycling of the silicon-containing by-products with inexpensive, readily available, and environmentally benign reagents.

Transition-Metal-Free Acceptorless Decarbonylation of Formic Acid Enabled by a Liquid Chemical-Looping Strategy

The selective decarbonylation of formic acid was achieved under transition-metal-free conditions. Using a liquid chemical-looping strategy, the thermodynamically favored dehydrogenation of formic acid was shut down, yielding a pure stream of CO with no H₂ or CO₂ contamination. The transformation involves a two-step sequence where methanol is used as a recyclable looping agent to yield methylformate, which is subsequently decomposed to carbon monoxide using alkoxides as catalysts.

Highly Efficient Base-Free Dehydrogenation of Formic Acid at Low Temperature

The ruthenium complex [RuH₂ (PPh₃ )₄ ] is a competent catalyst for the selective dehydrogenation of formic acid (FA) at low temperature. It tolerates water and shows excellent performance (TOF up to 36 000 h^-1 at 60 °C). Remarkably, no basic additives are necessary to obtain such high activity and the defined complex is stable for up to 120 days, making this system one of the most effective formic acid dehydrogenation catalysts known to date.

Tailored Cobalt-Catalysts for Reductive Alkylation of Anilines with Carboxylic Acids under Mild Conditions

The first cobalt-catalyzed hydrogenative N-methylation and alkylation of amines with readily available carboxylic acid feedstocks as alkylating agents and H₂ as ideal reductant is described. Combination of tailor-made triphos ligands with cobalt(II) tetrafluoroborate significantly improved the efficiency, thus promoting the reaction under milder conditions. This novel protocol allows for a broad substrate scope with good functional group tolerance, even in the presence of reducible alkenes, esters, and amides.

Towards Sustainable Production of Formic Acid

Formic acid is a widely used commodity chemical. It can be used as a safe, easily handled, and transported source of hydrogen or carbon monoxide for different reactions, including those producing fuels. The review includes historical aspects of formic acid production. It briefly analyzes production based on traditional sources, such as carbon monoxide, methanol, and methane. However, the main emphasis is on the sustainable production of formic acid from biomass and biomass-derived products through hydrolysis and oxidation processes. New strategies of low-temperature synthesis from biomass may lead to the utilization of formic acid for the production of fuel additives, such as methanol; upgraded bio-oil; γ-valerolactone and its derivatives; and synthesis gas used for the Fischer-Tropsch synthesis of hydrocarbons. Some technological aspects are also considered.

Direct CO2 Addition to a Ni(0)-CO Species Allows the Selective Generation of a Nickel(II) Carboxylate with Expulsion of CO

Addition of CO₂ to a low-valent nickel species has been explored with a newly designed ^acriPNP pincer ligand (^acriPNP^- = 4,5-bis(diisopropylphosphino)-2,7,9,9-tetramethyl-9H-acridin-10-ide). This is a crucial step in understanding biological CO₂ conversion to CO found in carbon monoxide dehydrogenase (CODH). A four-coordinate nickel(0) state was reliably accessed in the presence of a CO ligand, which can be prepared from a stepwise reduction of a cationic {(^acriPNP)Ni(II)-CO}⁺ species. All three Ni(II), Ni(I), and Ni(0) monocarbonyl species were cleanly isolated and spectroscopically characterized. Addition of electrons to the nickel(II) species significantly alters its geometry from square planar toward tetrahedral because of the filling of the d_x²-y² orbital. Accordingly, the CO ligand position changes from equatorial to axial, ∠N-Ni-C of 176.2(2)° to 129.1(4)°, allowing opening of a CO₂ binding site. Upon addition of CO₂ to a nickel(0)-CO species, a nickel(II) carboxylate species with a Ni(η¹-CO₂-κC) moiety was formed and isolated (75%). This reaction occurs with the concomitant expulsion of CO(g). This is a unique result markedly different from our previous report involving the flexible analogous PNP ligand, which revealed the formation of multiple products including a tetrameric cluster from the reaction with CO₂. Finally, the carbon dioxide conversion to CO at a single nickel center is modeled by the successful isolation of all relevant intermediates, such as Ni-CO₂, Ni-COOH, and Ni-CO.

Hydrogenation of silyl formates: sustainable production of silanol and methanol from hydrosilane and carbon dioxide

Simultaneous production of methanol and silanols was achieved by hydrogenation of silyl formates readily obtained from silanes and CO₂.

Metal-free disproportionation of formic acid mediated by organoboranes

In the presence of dialkylboranes, formic acid is converted to formaldehyde and methanol derivatives. This is the first example of formate disproportionation under metal-free conditions. Mechanistic studies highlight the role of transient borohydrides in the reduction of formates and this is further shown in transfer hydroboration for aldehyde reduction.

In the presence of dialkylboranes, formic acid can be converted to formaldehyde and methanol derivatives without the need for an external reductant. This reactivity, in which formates serve as the sole carbon and hydride sources, represents the first example of the disproportionation of formate anions under metal-free conditions. Capitalizing on both experimental and computational (DFT) mechanistic considerations, the role of transient borohydride is highlighted in the reduction of formates and this reactivity was further exemplified in the methylation of TMP (2,2,6,6-tetramethylpiperidine) and in the transfer hydroboration reactions for the reduction of aldehydes.

Self-Sufficient Formaldehyde-to-Methanol Conversion by Organometallic Formaldehyde Dismutase Mimic

The catalytic networks of methylotrophic organisms, featuring redox enzymes for the activation of one-carbon moieties, can serve as great inspiration in the development of novel homogeneously catalyzed pathways for the interconversion of C1 molecules at ambient conditions. An imidazolium-tagged arene-ruthenium complex was identified as an effective functional mimic of the bacterial formaldehyde dismutase, which provides a new and highly selective route for the conversion of formaldehyde to methanol in absence of any external reducing agents. Moreover, secondary amines are reductively methylated by the organometallic dismutase mimic in a redox self-sufficient manner with formaldehyde acting both as carbon source and reducing agent.

Reductive Etherification of Fatty Acids or Esters with Alcohols using Molecular Hydrogen

In the presence of a catalyst system consisting of a ruthenium/triphos complex and the Brønsted acid trifluoromethanesulfonimide, mixtures of fatty acids and aliphatic alcohols are converted into the corresponding ethers at 70 bar H2 . The protocol allows the sustainable one-step synthesis of valuable long-chain ether fragrances, lubricants, and surfactants from renewable sources. The reaction protocol is extended to various fatty acids and esters both in pure form and as mixtures, for example, tall oil acids or rapeseed methyl ester (RME). Even the mixed triglyceride rapeseed oil was converted in one step.

Selective Catalytic Synthesis Using the Combination of Carbon Dioxide and Hydrogen: Catalytic Chess at the Interface of Energy and Chemistry

The present Review highlights the challenges and opportunities when using the combination CO2 /H2 as a C1 synthon in catalytic reactions and processes. The transformations are classified according to the reduction level and the bond-forming processes, covering the value chain from high volume basic chemicals to complex molecules, including biologically active substances. Whereas some of these concepts can facilitate the transition of the energy system by harvesting renewable energy into chemical products, others provide options to reduce the environmental impact of chemical production already in today's petrochemical-based industry. Interdisciplinary fundamental research from chemists and chemical engineers can make important contributions to sustainable development at the interface of the energetic and chemical value chain. The present Review invites the reader to enjoy this exciting area of "catalytic chess" and maybe even to start playing some games in her or his laboratory.

Electronic effects on the catalytic disproportionation of formic acid to methanol by [Cp*IrIII(R-bpy)Cl]Cl complexes

The electronic effects on the catalytic disproportionation of formic acid to methanol by a series of iridium complexes are elucidated.

Aqueous biphasic iron-catalyzed asymmetric transfer hydrogenation of aromatic ketones

For the first time, an iron(ii) catalyst is used in the biphasic asymmetric transfer hydrogenation (ATH) of ketones to enantioenriched alcohols employing water and potassium formate as the proton and hydride source, respectively.

Synergistic effects in ambiphilic phosphino-borane catalysts for the hydroboration of CO2

The benefit of combining both a Lewis acid and a Lewis base in a catalytic system has been established for the hydroboration of CO₂, using ferrocene-based phosphine, borane and phosphino-borane derivatives.

Triphos derivatives and diphosphines as ligands in the ruthenium-catalysed alcohol amination with NH3

The ruthenium-triphos and diphosphine-catalysed amination of alcohols with ammonia is reported.

Complexes of the tripodal phosphine ligands PhSi(XPPh2)3(X = CH2, O): synthesis, structure and catalytic activity in the hydroboration of CO2

The coordination chemistry of Fe²⁺, Co²⁺and Cu⁺ions was explored with the ligands PhSi{CH₂PPh₂}₃(1) and PhSi{OPPh₂}₃(2), so as to evaluate the impact of the electronic properties of the tripodal phosphorus ligands on the structure and reactivity of the corresponding complexes.