Advancing the Electrochemistry of the Hydrogen‐Evolution Reaction through Combining Experiment and Theory

Exploring PtAg onto silanized biogenic silica as an electrocatalyst for H2 evolution: A combined experimental and theoretical investigation

The task of creating a remarkably stable and effective electrochemical catalyst for efficient hydrogen evolution is arduous, primarily due to the multitude of factors that need to be taken into account for the industrial utilization of Pt. In this work, hybrid formation through in-situ reduction of Pt onto biogenic porous silica (Pt-SiO2) is tested for its use as an efficient catalyst for hydrogen production. Exceptionally high electrocatalytic activity and excellent reusability of catalysts up to 200 cycles have been demonstrated. Pt-SiO2 with low Pt content of 0.48 to 0.82 at% with active catalytic sites exhibit superior catalytic activity with a Tafel slope of 22 mV dec-1 and an overpotential of 28 mV (vs. RHE at 10 mA cm-2) as compared to the Pt wire and previously reported bare Pt-SiO2 (0.65 at% and 0.48 at% of Pt), and hybrid (Pt/Ag) structures formed onto two different biogenic porous SiO2 substrates. The best catalytic performance of the Pt1Ag3 cluster, representing a low Pt concentration, has been validated by Density Functional Theory (DFT) calculations. Here, the high production from the Pt1Ag3 cluster is assigned to the mutual synergistic effect between Pt/Ag atoms. The Pt atoms transfer the excess charge to the nearest Ag neighbors inside the cluster, facilitating hydrogen diffusion on the activated sites. These important findings authenticate the superior hydrogen production at reduced Pt concentration on amine-functionalized biogenic porous silica.

Computational screening of single-atom transition metals on boron-rich boron nitride nanosheets for efficient hydrogen evolution catalysis in all pH range

Low-cost and high-efficiency catalysts are of crucial importance for the electrocatalytic hydrogen evolution reaction (HER). Two-dimensional (2D) boron nitride (B-N) compounds formed by the combination of boron and nitrogen atoms of group III and V elements are promising candidates for electrocatalytic HER due to their significant electronic properties. Hence, an electrocatalyst is computer-aided designed with isolated single atoms of 3d, 4d, and 5d transition metals supported on 2D B-N (B2N, B5N3, and B7N5) monolayers to fabricate single-atom catalysts (SACs) with an excellent HER performance. Moreover, pH modulations are considered to improve the HER activity theoretically based on first-principles calculation. Our results indicate that B-N compounds surface doping with transition metal atoms can effectively enhance the HER catalytic performance over a wide range of pH. Among all SACs studied, Co-, Ti-, V-, Nb-, Ru-, Tc-, Zr-, and Os-embedded B2N, Sc-, Cr-, Mn-, Ti-, and Y-embedded B5N3, and Sc- and Mn-embedded B7N5 have excellent catalytic activity under acidic conditions, while Mo-, Ir-, Re-, Ta-, and W-embedded B2N and Ti- and Fe-embedded B7N5 show high catalytic activity under alkaline conditions. Interestingly, Hf@B2N and V@B5N3 systems exhibit promising catalytic activity under acidic, neutral, and alkaline conditions. Our work offers cost-effective candidates with a wide pH range HER performance for exploring ideal electrocatalysts.

First-Principles Calculations and Machine Learning of Hydrogen Evolution Reaction Activity of Nonmetallic Doped β-Mo2C Support Pt Single-Atom Catalysts

The most widely used catalyst for the hydrogen evolution reaction (HER) is Pt, but the high cost and low abundance of Pt need to be urgently addressed. Single-atom catalysts (SACs) have been an effective means of improving the utilization of Pt atoms. In this work, we used a nonmetal (NM = B, N, O, F, Si, P, S, Cl, As, Se, Br, Te, and I) doped β-Mo2C (100) C-termination surface as the support, with Pt atoms dispersed on the support surface to construct Pt@NM-Mo2C. Using density functional theory (DFT) calculations, we selected catalysts with excellent HER activity. Among 117 candidate catalysts, 49 catalysts exhibited ideal catalytic performance with Gibbs free energy of hydrogen intermediate (H*) adsorption (ΔGH*) values less than 0.2 eV. The ΔGH* values of 16 catalysts were even lower than that of Pt (ΔGH* ≈ 0.09 eV), with PtI@N2/4-a-Mo2C demonstrating the best performance (ΔGH* = -0.01 eV). Combined with electronic structure analysis, we could understand the impact of charge transfer between Pt and the underlying NM atoms on the strength of the Pt-H bond, thereby promoting HER activity. Using machine learning (ML), we identified that the primary influencing factors of the HER catalytic activity in the Pt@NM-Mo2C system were the Bader charge transfer of Pt (NePt), the d-band center of Pt (εdPt), and the atomic radius of NM (RNM), with NePt having the greatest impact on the HER catalytic activity.

Performance parameters of infra-red and visible-active MXene photocatalysts for water splitting

Water splitting reactions through photocatalysis are an efficient and sustainable technique for the generation of green energy. Ability to simultaneously generate hydrogen and oxygen, along with efficiency of utilizing charge carriers, conversion of solar energy to hydrogen, fast migration, and low recombination rates of carriers are the parameters that decide a photocatalyst's suitability in water splitting. In the literature, comprehensive calculation and analysis of all these performance parameters for a potential photocatalyst are rare. In this work, we have performed first-principles-based computations to find new efficient photocatalysts from the family of Janus MXenes and assessed their performance parameters using strain engineering. Out of 14 studied materials, we find 5 materials: Sc2COS, Zr2COS, Hf2COS, and ZrHfCO2 under zero or finite tensile strain and Hf2COSe under 6% tensile strain meeting the requirements of simultaneous reactions to split water. The computations of various efficiency-related parameters demonstrate that Zr2COS, Hf2COS, and Hf2COSe have excellent efficiencies, significantly better than those of the well-known photocatalysts. The origin of such performances lies in their electronic and optical properties, which are analysed systematically.

Enhanced Photocatalytic Hydrogen Evolution Activity Driven by the Synergy Between Surface Vacancies and Cocatalysts: Surface Reaction Matters

The incorporation of defects and cocatalysts is known to be effective in improving photocatalytic activity, yet their coupled contribution to the photocatalytic hydrogen evolution process has not been well-explored. In this study, We demonstrate that the incorporation of S vacancies and NiSe can contribute to the improvement of charge separation efficiency via the formation of a strong electric field within the bulk ZnIn2S4 (ZIS) and on its surface. More importantly, We also demonstrate that the synergy of S vacancies and NiSe benefits the overall hydrogen evolution activity by facilitating the H2O adsorption and dissociation process. This is particularly important for hydrogen evolution taking place under alkaline conditions where the proton concentration is low, allowing ZISv-NiSe (containing abundant S vacancies) to outperform ZIS-NiSe under alkaline conditions. In contrast, under acid conditions, since there are already sufficient amounts of protons available for reaction, the hydrogen evolution activity became governed by the hydrogen adsorption/desorption process rather than the H2O dissociation process. This leads to ZIS-NiSe exhibiting higher activity than ZISv-NiSe due to its more favorable hydrogen adsorption energy. The findings thus provide insights into how defect and cocatalyst modification strategies can be tailor-made to improve hydrogen evolution activity under different pH conditions.

Organocatalytic Hydrogen Evolution Reaction by Diazaphospholenes

The electrochemical hydrogen evolution reaction (HER) is currently recognized as a prospective way to obtain clean energy. The electrocatalysts used currently are dominantly based on transition metals. In this work, we have demonstrated a diazaphospholene (N-heterocyclic phosphine (NHP))-type small molecular organocatalyst that can catalyze the HER with a maximum current density of 130 mA·cm-2, an overpotential of 354 mV, and a faradaic efficiency of 90%. Mechanistic studies verify a Heyrovsky-type process with NHP, whereas its hydricity and aromaticity favor hydrogen release and catalyst regeneration.

Direct Operando Identification of Reactive Electron Species Driving Photocatalytic Hydrogen Evolution on Metal-Loaded Oxides

Performing operando spectroscopy under practical reaction conditions and extracting spectral components correlating with reaction activity are crucial in elucidating the reactive species in photocatalysis. However, the observation of weak signals corresponding to reactive photogenerated species is frequently hampered under reaction conditions owing to intense background signals originating from thermally induced species unrelated to the photoinduced reactions. Herein, by synchronizing the millisecond periodic excitations of photocatalysts with a Michelson interferometer used for FT-IR spectroscopy, we succeeded in significantly suppressing the signals derived from thermally excited electrons and observing the reactive photogenerated electrons contributing to the photocatalytic hydrogen evolution. This demonstration was achieved for metal-loaded oxide photocatalysts under steam methane reforming and water splitting conditions. Although it has long been conventionally believed that loaded metal cocatalysts function as sinks for reactive photogenerated electrons and active sites for reduction reactions, we found that the free electrons in the metal cocatalysts were not directly involved in the reduction reaction. Alternatively, the electrons shallowly trapped in the in-gap states of oxides contributed to enhancing the hydrogen evolution rate upon the loading of metal cocatalysts. We verified that the electron abundance in the in-gap states was clearly correlated to the reaction activity, suggesting that metal-induced semiconductor surface states formed in the periphery of the metal cocatalyst play key roles in the photocatalytic hydrogen evolution. Our microscopic insights shift a paradigm on the traditionally believed role of metal cocatalysts in photocatalysis and provide a fundamental basis for rational design of the metal/oxide interfaces as promising platforms for nonthermal hydrogen evolution.

Revisiting the activity origin of the PtAu24(SR)18 nanocluster for enhanced electrocatalytic hydrogen evolution by combining first-principles simulations with the experimental in situ FTIR technique

Thiolate-protected metal nanoclusters (NCs) have been widely used in various electrocatalytic reactions, yet the dynamic evolution of metal NCs during electrocatalysis has been rarely explored and the activity origin remains largely ambiguous. Herein, using a PtAu24(SCH3)18 NC as a prototype model, we combined advanced first-principles calculations and attenuated total reflection surface-enhanced infrared spectroscopy (ATR-SEIRAS) to re-examine its active site and reaction dynamics in the hydrogen evolution reaction (HER). It has been previously assumed that the central Pt is the only catalytic center. However, differently, we observed the spontaneous desorption of thiolate ligands under moderate potential, and the dethiolated PtAu24 exhibits excellent HER activity, which is contributed not only by the central Pt atom but also by the exposed bridged Au sites. Particularly, the exposed Au exhibits high activity even comparable to Pt, and the synergistic effect between them makes dethiolated PtAu24 an extraordinary HER electrocatalyst, even surpassing the commercial Pt/C catalyst. Our predictions are further verified by electrochemical activation experiments and in situ FTIR (ATR-SEIRAS) characterization, where evident adsorption of Au-H* and Pt-H* bonds is monitored. This work detected, for the first time, the Au-S interfacial dynamics of the PtAu24 nanocluster in electrocatalytic processes, and quantitatively evaluated the essential catalytic role of the exposed Au sites that has been largely overlooked in previous studies.

Synergy of oxygen reduction for H2O2 production and electro-fenton induced by atomic hydrogen over a bifunctional cathode towards water purification

In the Electro-Fenton (EF) process, hydrogen peroxide (H2O2) is produced in situ by a two-electron oxygen reduction reaction (2e ORR), which is further activated by electrocatalysts to generate reactive oxygen specieces (ROS). However, the selectivity of 2e transfer from catalysts to O2 is still unsatisfactory, resulting in the insufficient H2O2 availability. Carbon based materials with abundant oxygen-containing functional groups have been used as excellent 2e ORR electrocatalysts, and atomic hydrogen (H*) can quickly transfer one electron to H2O2 in a wide pH range and avoiding the restrict of traditional Fenton reaction. Herein, nickel nanoparticles growth on oxidized carbon deposited on modified carbon felt (Ni/Co@CFAO) was prepared as a bifunctional catalytic electrode coupling 2e ORR to form H2O2 with H* reducing H2O2 to produce ROS for highly efficient degradation of antibiotics. Electrochemical oxidation and thermal treatment were used to modulate the structure of carbon substrates for increasing the electro-generation of H2O2, while H* was produced over Ni sites through H2O/H+ reduction constructing an in-situ EF system. The experimental results indicated that 2e ORR and H* induced EF processes could promote each other mutually. The optimized Ni/Co@CFAO with a Ni:C mass ratio of 1:9 exhibited a high 2e selectivity and H2O2 yield of 49 mg L-1. As a result, the designed Ni/Co@CFAO exhibited excellent electrocatalytic ability to degrade tetracycline (TC) under different aqueous environmental conditions, and achieved 98.5% TC removal efficiency within 60 min H2O2 and H* were generated simultaneously at the bifunctional cathode and react to form strong oxidizing free radicals •OH. At the same time, O2 gained an electron to form •O2-, which could react with •OH and H2O to form 1O2, which had relatively long life (10-6∼10-3 s), further promoting the efficient removal of antibiotics in water.

Positively Charged Hollow Co Nanoshells by Kirkendall Effect Stabilized by Electron Sink for Alkaline Water Dissociation

While cobalt (Co) exhibits a comparable energy barrier for H* adsorption/desorption to platinum in theory, it is generally not suitable for alkaline hydrogen evolution reaction (HER) because of unfavorable water dissociation. Here, the Kirkendall effect is adopted to fabricate positive-charged hollow metal Co (PHCo) nanoshells that are stabilized by MoO2 and chainmail carbon as the electron sink. Compared to the zero-valent Co, the PHCo accelerates the water dissociation and changes the rate-determining step from Volmer to Heyrovsky process. Alkaline HER occurs with a low overpotential of 59.0 mV at 10 mA cm-2. Operando Raman and first principles calculations reveal that the interfacial water to the PHCo sites and the accelerated proton transfer are conducive to the adsorption and dissociation of H2O molecules. Meanwhile, the upshifted d-band center of PHCo optimizes the adsorption/desorption of H*. This work provides a unique synthesis of hollow Co nanoshells via the Kirkendall effect and insights to water dissociation on catalyst surfaces with tailored charge states.

Cobalt-Based Nanoscale Material: An Emerging Electrocatalyst for Hydrogen Production

Modern civilization has been highly suffering from energy crisis and environmental pollutions. These two burning issues are directly and indirectly created from fossil fuel consumption and uncontrolled industrialization. The above critical issue can be solved through the proper utilization of green energy sources where no greenhouse gases will be generated upon burning of such materials. Hydrogen is the most eligible candidate for this purpose. Among various methods of hydrogen generation, electrocatalytic process is one of the most efficient methods because of easy handling and high efficiency. In these aspects Co-based nanomaterials are considered to be extremely significant as they can be utilized as efficient, recyclable and ideal catalytic system. In this article a series of Co-based nano-electrocatalysts has been discussed with proper structure-property relationship and their medium dependency. Therefore, such type of stimulating summary on recently reported electrocatalysts and their activity may be helpful for scientists of the corresponding field as well as for broader research communities. This can be inspiration for materials researchers to fabricate active catalysts for the production of hydrogen gas in room temperature.

Ru-regulated electronic structure CoNi-MOF nanosheets advance water electrolysis kinetics in alkaline and seawater media

Herein, an ion-exchange strategy is utilized to greatly improve the kinetics of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) by Ru-modified CoNi- 1,3,5-Benzenetricarboxylic acid (BTC)-metal organic framework nanosheets (Ru@CoNi-MOF). Due to the higher Ni active sites and lower electron transfer impedance, Ru@CoNi-MOF catalyst requires the overpotential as low as 47 and 279 mV, at a current density of 10 mA/cm2 toward HER and OER, respectively. Significantly, the mass activity of Ru@CoNi-MOF for HER and OER are 25.9 and 10.6 mA mg-1, nearly 15.2 and 8.8 times higher than that of Ni-MOF. In addition, the electrolyzer of Ru@CoNi-MOF demonstrates exceptional electrolytic performance in both KOH and seawater environment, surpasses the commercial Pt/C||IrO2 couple. Theoretical calculations prove that introducing Ru atoms in - CoNi-MOF modulates the electronic structure of Ni, optimizes adsorption energy for H* and reduces energy barrier of metal organic frameworks (MOFs). This modification significantly improves the kinetic rate of the Ru@CoNi-MOF during water splitting. Certainly, this study highlights the utilization of MOF nanosheets as advanced HER/OER electrocatalysts with immense potential, and will paves a way to develop more efficient MOFs for catalytic applications.

Single Entity Electrocatalysis

Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.

Tuning the Local Environment of Pt Species at CNT@MO2-x (M = Sn and Ce) Heterointerfaces for Boosted Alkaline Hydrogen Evolution

As the most promising hydrogen evolution reaction (HER) electrocatalysts, platinum (Pt)-based catalysts still struggle with sluggish kinetics and expensive costs in alkaline media. Herein, we accelerate the alkaline hydrogen evolution kinetics by optimizing the local environment of Pt species and metal oxide heterointerfaces. The well-dispersed PtRu bimetallic clusters with adjacent MO2-x (M = Sn and Ce) on carbon nanotubes (PtRu/CNT@MO2-x) are demonstrated to be a potential electrocatalyst for alkaline HER, exhibiting an overpotential of only 75 mV at 100 mA cm-2 in 1 M KOH. The excellent mass activity of 12.3 mA μg-1Pt+Ru and specific activity of 32.0 mA cm-2ECSA at an overpotential of 70 mV are 56 and 64 times higher than those of commercial Pt/C. Experimental and theoretical investigations reveal that the heterointerfaces between Pt clusters and MO2-x can simultaneously promote H2O adsorption and activation, while the modification with Ru further optimizes H adsorption and H2O dissociation energy barriers. Then, the matching kinetics between the accelerated elementary steps achieved superb hydrogen generation in alkaline media. This work provides new insight into catalytic local environment design to simultaneously optimize the elementary steps for obtaining ideal alkaline HER performance.

Facilitating the Hydrogen Evolution Reaction on Basal-Plane S Sites on MoS2@Ni3S2 by Dual Ti and N Plasma Treatment

Atomic engineering of the basal plane active sites in MoS2 holds great promise to boost the electrocatalytic activity for hydrogen evolution reactions (HER), yet the performance optimization and mechanism exploration are still not satisfactory. Herein, we proposed a dual-plasma engineering strategy to implant Ti and N heteroatoms into the basal plane of MoS2 supported by Ni3S2 nanorods on nickel foam (MSNF) for efficient electrocatalysis of HER. Owing to the low formation energy of Ti dopants in MoS2 and the extra charge carriers introduced by N dopants, the optimally codoped samples N1.0@Ti500-MSNF demonstrate significant morphology changes from nanorods to urchin-like nanospheres with the surface active areas increased by seven-fold, as well as enhanced electrical conductivity in comparison with the nondoped counterparts. The HER performance of N1.0@Ti500-MSNF is comparable with the Pt-based catalyst: overpotential of 26 mV at 20 mA cm-2, Tafel slope of 35.6 mV dec-1, and long-term stability over 50 h. First-principles calculation reveals that N doping accelerates the dissociation of water molecules while Ti doping activates the adjacent S sites for hydrogen adsorption by lowering the Gibbs free energy, resulting in excellent HER activity. This work thus provides an effective strategy for basal plane engineering of MoS2 heterostructures toward high-performance HER and sustainable energy supply at reasonable costs.

Research progress on metal-organic framework compounds (MOFs) in electrocatalysis

Metal-organic frameworks (MOFs) have favorable characteristics such as large specific surface area, high porosity, structural diversity, and pore surface modification, giving them great potential for development and attractive prospects in the research area of modern materials electrocatalysis. However, unsatisfactory catalytic activity and poor electronic conductivity are the main challenges facing MOFs. This review focuses on MOF-based materials used in electrocatalysis, based on the types of catalytic reactions that have used MOF-based materials in recent years along with their applications, and also looks at some new electrocatalytic materials and their future development prospects.

Competition between Initial CO2 Electroreduction and Hydrogen Evolution Reaction on Cu Catalysts in Acidic Media: Role of Specifically Adsorbed Halide Anions

The role of halide anions and competing mechanisms between initial CO2 electroreduction pathways and hydrogen evolution reaction (HER) are systematically identified at halide anions modified Cu(111)/H2O interfaces based on density functional theory calculations in this paper. The present results show that halide anions modified Cu(111)/H2O interfaces can notably enhance electroreduction activity of CO2 into CO. Simultaneously, it is concluded that the specifically adsorbed halide anions modified Cu electrodes can inhibit HER by studying competing HER mechanisms, and thus the enhanced CO2 electroreduction activity can be ascribed to the suppressed HER. The origin of enhanced CO production activity and inhibited HER is further scrutinized. The present results show that the presence of halide anions can lead to stronger CO adsorption and the increased adsorption strength of CO can explain easier CO production based on the Sabatier principle. Interestingly, the calculated results show that the presence of halide anions does not exert an effect on H adsorption strength, which is regarded as a key descriptor of HER activity, implying that halide anions modified Cu electrodes may be not able to directly lead to the inhibited HER. However, the present results indicate that co-adsorbed CO can weaken adsorption strength between H and Cu electrodes and thus result in inhibited HER and decreased HER activity. The upshift of d-band centers of surface Cu atoms due to modification of halide anions may be a reason for stronger CO adsorption, whereas the downshift of the d-band center due to the presence of co-adsorbed CO can lead to a weakening effect on H adsorption strength. Our present insights into the role of halide anions can aid in designing an optimal electrolyte and developing electrocatalysts that are more selective toward CO2 electroreduction than HER.

Dynamic restructuring of nickel sulfides for electrocatalytic hydrogen evolution reaction

Transition metal chalcogenides have been identified as low-cost and efficient electrocatalysts to promote the hydrogen evolution reaction in alkaline media. However, the identification of active sites and the underlying catalytic mechanism remain elusive. In this work, we employ operando X-ray absorption spectroscopy and near-ambient pressure X-ray photoelectron spectroscopy to elucidate that NiS undergoes an in-situ phase transition to an intimately mixed phase of Ni3S2 and NiO, generating highly active synergistic dual sites at the Ni3S2/NiO interface. The interfacial Ni is the active site for water dissociation and OH* adsorption while the interfacial S acts as the active site for H* adsorption and H2 evolution. Accordingly, the in-situ formation of Ni3S2/NiO interfaces enables NiS electrocatalysts to achieve an overpotential of only 95 ± 8 mV at a current density of 10 mA cm-2. Our work highlighted that the chemistry of transition metal chalcogenides is highly dynamic, and a careful control of the working conditions may lead to the in-situ formation of catalytic species that boost their catalytic performance.

Synergistic Al-Al Dual-Atomic Site for Efficient Artificial Nitrogen Fixation

Synthesis of ammonia by electrochemical nitrogen reduction reaction (NRR) is a promising alternative to the Haber-Bosch process. However, it is commonly obstructed by the high activation energy. Here, we report the design and synthesis of an Al-Al bonded dual atomic catalyst stabilized within an amorphous nitrogen-doped porous carbon matrix (Al2NC) with high NRR performance. The dual atomic Al2-sites act synergistically to catalyze the complex multiple steps of NRR through adsorption and activation, enhancing the proton-coupled electron transfer. This Al2NC catalyst exhibits a high Faradaic efficiency of 16.56±0.3 % with a yield rate of 29.22±1.2 μg h-1 mgcat -1. The dual atomic Al2NC catalyst shows long-term repeatable, and stable NRR performance. This work presents an insight into the identification of synergistic dual atomic catalytic site and mechanistic pathway for the electrochemical conversion of N2 to NH3.

In-situ construction of cation vacancies in amphoteric-metallic element-doped NiFe-LDH as ultrastable and efficient alkaline hydrogen evolution electrocatalysts at 1000 mA cm-2

Developing efficient and stable electrocatalysts at affordable costs is very important for large-scale production of green hydrogen. In this study, unique amphoteric metallic element-doped NiFe-LDH nanosheet arrays (NiFeCd-LDH, NiFeZn-LDH and NiFeAl-LDH) using as high-performance bifunctional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) were reported, by tuning electronic structure and vacancy engineering. It was found that NiFeCd-LDH possesses the lowest overpotentials of 85 mV and 240 mV (at 10 mA cm-2) for HER and OER, respectively. Density functional theory (DFT) calculations reveal the synergistic effect of Cd vacancies and Cd doping on improving alkaline HER performance, which promote the achievement of excellent catalytic activity and ultrastable hydrogen production at a large current density of 1000 mA cm-2 within 250 h. Besides, the overall water splitting performance of the as-prepared NiFeCd-LDH requires only 1.580 V to achieve a current density of 10 mA cm-2 in alkaline seawater media, underscoring the importance of modifying the electronic properties of LDH for efficient overall water splitting in both alkaline water/seawater environments.

Recycling cobalt from spent lithium-ion batteries for designing the novel cobalt nitride followers: Towards efficient overall water splitting and advanced zinc-air batteries

Although cobalt nitride (CoN)-based nanomaterials have been widely designed as advanced oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and oxygen reduction reaction (ORR) catalysts, the continuous consumption of lithium-ion batteries (LIBs) has led to a high price of cobalt metal. Therefore, in the future, recycling valuable Co elements from spent devices and boosting their service efficiency will inevitably promote the utilization of Co-based materials in water splitting and zinc-air batteries (ZABs). Herein, we realize the Co recycling from spent LIBs by a simple hydrometallurgy method. Under the assistance of hexamethylenetetramine and polystyrene spheres, after the hydrothermal and pyrolysis treatment in the NH3 atmosphere, the as-reclaimed cobalt oxalates were successfully transformed into novel three-dimensional (3D) CoN nanoflowers (denoted as CoN NFs). Benefiting from the unique 3D flower-like architectures, intrinsic high conductivity, large surface area, uniformly dispersed CoN nanoparticles, and the synergistic effect between Co3N and CoO phases, the 3D flower-like CoN NFs exhibited excellent OER catalytic activity. The performance was much better than commercial RuO2 in the 1.0 M KOH solution. Furthermore, the CoN NFs-based water splitting cell needed a voltage of 1.608 V to achieve the current density of 10 mA cm-2, which is even 16 mV smaller than that of Pt/C||RuO2 benchmark (1.624 V). Meanwhile, the CoN NFs-derived ZAB exhibited a high peak power density of 107.3 mW cm-2 (vs. 103.2 mW cm-2 of Pt/C-RuO2-based ZAB) and a low charge-discharge voltage gap (0.93 V vs. 1.43 V of Pt/C-RuO2-based ZAB). Due to the excellent structural and elemental stabilities, the corresponding water splitting cell and ZAB had outstanding durability. This work successfully explored an advanced industrial chain from recycling Co metal in spent devices to designing the high-efficiency HER/OER/ORR electrocatalysts for advanced water splitting devices and ZABs. This will further promote the value-added utilization of valuable Co metal in various energy storage or conversion devices.

The electrocatalytic activity for the hydrogen evolution reaction on alloys is determined by element-specific adsorption sites rather than d-band properties

Trends of the electrocatalytic activities for the hydrogen evolution reaction (HER) across transition metals are typically explained by d-band properties such as center or upper edge positions in relation to Fermi levels. Here, the universality of this relation is questioned for alloys, exemplified for the AuPt system which is examined with electrocatalytic measurements and density functional theory (DFT) calculations. At small overpotentials, linear combinations of the pure-metals' Tafel kinetics normalized to the alloy compositions are found to precisely resemble the measured HER activities. DFT calculations show almost neighbor-independent adsorption energies on Au and Pt surface-sites, respectively, as the adsorbed hydrogen influences the electron density mostly locally at the adsorption site itself. In contrast, the density of states of the d-band describe the delocalized conduction electrons in the alloys, which are unable to portray the local electronic environments at adsorption sites and related bonding strengths. The adsorption energies at element-specific surface sites are related to overpotential-dependent reaction mechanisms in a multidimensional reinterpretation of the volcano plot for alloys, which bridges the found inconsistencies between activity and bonding strength descriptors of the common electrocatalytic theory for alloys.

Interfacial charge transfer in sheet Ni2P-FePx heterojunction to promote the study of electrocatalytic oxygen evolution

The substantial expense associated with catalysts significantly hampers the progress of electrolytic water-based hydrogen production technology. There is an urgent need to find non-precious metal catalysts that are both cost-effective and highly efficient. Here, the porous Ni2P-FePx nanomaterials were successfully prepared by hydrothermal method, nickel foam as the base, iron nitrate solution as the caustic agent and iron source, and finally phosphating at low temperature. The obtained porous Ni2P-FePx nanosheets showed excellent catalytic activity under alkaline PH = 14, and an overpotential of merely 241 mV was required to achieve a current density of 50 mA cm-2. The morphology of the nanosheet can still be flawlessly presented on the screen after 50 h of working at high current density.

A nitrogen-doped carbon nanosheet composited platinum-cobalt single atom alloy catalyst for effective hydrogen evolution reaction

An electrocatalyst with ultra-small PtCo single atom alloy species evenly dispersed on nitrogen-doped ultra-thin carbon nanosheets (PtCo SAA/NC) was designed. The introduction of single-atom Pt not only maximizes the atomic utilization efficiency of Pt species, but also synergistically enhances the charge transfer characteristics of Co cluster surfaces, thereby increasing the migration and evolution rate of hydrogen ions. The PtCo SAA/NC catalyst exhibits a Tafel slope of 42 mV dec-1 and a low overpotential of 45 mV at 10 mA cm-2 in 0.5 M H2SO4 solution.

In Situ Probing the Structure Change and Interaction of Interfacial Water and Hydroxyl Intermediates on Ni(OH)2 Surface over Water Splitting

There is growing acknowledgment that the properties of the electrochemical interfaces play an increasingly pivotal role in improving the performance of the hydrogen evolution reaction (HER). Here, we present, for the first time, direct dynamic spectral evidence illustrating the impact of the interaction between interfacial water molecules and adsorbed hydroxyl species (OHad) on the HER properties of Ni(OH)2 using Au/core-Ni(OH)2/shell nanoparticle-enhanced Raman spectroscopy. Notably, our findings highlight that the interaction between OHad and interfacial water molecules promotes the formation of weakly hydrogen-bonded water, fostering an environment conducive to improving the HER performance. Furthermore, the participation of OHad in the reaction is substantiated by the observed deprotonation step of Au@2 nm Ni(OH)2 during the HER process. This phenomenon is corroborated by the phase transition of Ni(OH)2 to NiO, as verified through Raman and X-ray photoelectron spectroscopy. The significant redshift in the OH-stretching frequency of water molecules during the phase transition confirms that surface OHad disrupts the hydrogen-bond network of interfacial water molecules. Through manipulation of the shell thickness of Au@Ni(OH)2, we additionally validate the interaction between OHad and interfacial water molecules. In summary, our insights emphasize the potential of electrochemical interfacial engineering as a potent approach to enhance electrocatalytic performance.

Correlation between Heteroatom Coordination and Hydrogen Evolution for Single-site Pt on Carbon-based Nanocages

The electrocatalytic performance of single-site catalysts (SSCs) is closely correlated with the electronic structure of metal atoms. Herein we construct a series of Pt SSCs on heteroatom-doped hierarchical carbon nanocages, which exhibit increasing hydrogen evolution reaction (HER) activities along S-doped, P-doped, undoped and N-doped supports. Theoretical simulation indicates a multi-H-atom adsorption process on Pt SSCs due to the low coordination, and a reasonable descriptor is figured out to evaluate the HER activities. Relative to C-coordinated Pt, N-coordinated Pt has higher reactivity due to the electron transfer of N-to-Pt, which enriches the density of states of Pt 5d orbital near the Fermi level and facilitates the capturing of protons, just the opposite to the situations for P- and S-coordinated ones. The stable N-coordinated Pt originates from the kinetic stability throughout the multi-H-atom adsorption process. This finding provides a significant guidance for rational design of advanced Pt SSCs on carbon-based supports.

A series of isostructural metal-organic frameworks for an enhanced electro-catalytic oxygen evolution reaction

Three new isostructural MOFs (ZnTIA, CoTIA and CdTIA) were synthesized by the solvothermal synthesis of the organic linker 5-triazole isophthalic acid (5-TIA) with the transition metals Zn(II), Co(II) and Cd(II) in the presence of the structure directing agent tetramethyl ammonium chloride (TMA). These three MOFs were characterized thoroughly by ScXRD, PXRD, FT-IR, TGA, BET and SEM. They have excellent thermal and water stabilities. Among all these MOFs mentioned, pristine CoTIA exhibited excellent electrocatalytic activity toward the oxygen evolution reaction (OER). It exhibits a Tafel slope of 68.9 mV dec-1 with an overpotential of 337 mV at 10 mA cm-2 current density. The OER activity of the CoTIA MOF is relatively equivalent to that of the state-of-the-art catalyst (RuO2). Furthermore, the mechanical stability of crystalline ZnTIA, CoTIA and CdTIA MOFs was tested under ball mill pressure. The result showed that all the MOFs exhibit low tolerance to mechanical force because their structure was highly distorted or collapsed under such pressure, which is reflected by their poor electrocatalytic OER activity.

Identifying the Active Sites in MoSi2@MoO3 Heterojunctions for Enhanced Hydrogen Evolution

Developing Two-dimensional (2D) Mo-based heterogeneous nanomaterials is of great significance for energy conversion, especially in alkaline hydrogen evolution reaction (HER), however, it remains a challenge to identify the active sites at the interface due to the structure complexity. Herein, the real active sites are systematically explored during the HER process in varied Mo-based 2D materials by theoretical computational and magnetron sputtering approaches first to filtrate the candidates, then successfully combined the MoSi2 and MoO3 together through Oxygen doping to construct heterojunctions. Benefiting from the synergistic effects between the MoSi2 and MoO3, the obtained MoSi2@MoO3 exhibits an unprecedented overpotential of 72 mV at a current density of 10 mA cm-2. Density functional theory calculations uncover the different Gibbs free energy of hydrogen adsorption (ΔGH*) values achieved at the interfaces with different sites as adsorption sites. The results can facilitate the optimization of heterojunction electrocatalyst design principles for the Mo-based 2D materials.

A Hydrogen Evolution Catalyst [Co2O2] Metallacycle Enables Regioselective Allene C(sp2)-H Functionalization

Selective functionalization of allenic C(sp2)-H is an ideal approach to upgrading simple allenes to synthetically useful allenes, albeit suffering from challenges associated with inert reactivity and inferior selectivity. Inspired by energy chemistry, a catalytic hydrogen evolution reaction (HER) strategy was leveraged to selectively activate weakly acidic allene C(sp2)-H bonds in a reductive mode. An array of [Co2O2] metallacycle complexes were readily devised starting from amino acids, and they were demonstrated as robust HER catalysts, which would selectively break allenic C(sp2)-H bonds to release hydrogen. With the newly developed HER catalyst, regioselective electrochemical functionalization of allenic C(sp2)-H with alcoholic α C(sp3)-H was unprecedentedly achieved. This strategy features excellent regioselectivity, unconventional chemoselectivity, good functional-group tolerance (62 examples), and mild conditions. Mechanism experiments revealed a reactive hydroxy-coordinated cobalt(II) species in the reaction. Density functional theory (DFT) calculations were also conducted to rationalize the regioselectivity observed in the reaction.

Confinement of CsPbBr3 Perovskite Nanocrystals into Extra-large-pore Zeolite for Efficient and Stable Photocatalytic Hydrogen Evolution

Metal halide perovskites (MHPs), renowned for their outstanding optoelectronic properties, hold significant promise as photocatalysts for hydrogen evolution reaction (HER). However, the low stability and insufficient exposure of catalytically active sites of bulky MHPs seriously impair their catalytic efficiency. Herein, we utilized an extra-large-pore zeolite ZEO-1 (JZO) as a host to confine and stabilize the CsPbBr3 nanocrystals (3.4 nm) for boosting hydrogen iodide (HI) splitting. The as-prepared CsPbBr3@ZEO-1 featured sufficiently exposed active sites, superior stability in acidic media, along with intrinsic extra-large pores of ZEO-1 that were favorable for molecule/ion adsorption and diffusion. Most importantly, the unique nanoconfinement effect of ZEO-1 led to the narrowing of the band gap of CsPbBr3, allowing for more efficient light utilization. As a result, the photocatalytic HER rate of the as-prepared CsPbBr3@ZEO-1 photocatalyst was increased to 1734 μmol ⋅ h-1 ⋅ g-1 (CsPbBr3) under visible light irradiation compared with bulk CsPbBr3 (11 μmol ⋅ h-1 ⋅ g-1 (CsPbBr3)), and the long-term durability (36 h) can be achieved. Furthermore, Pt was incorporated with well-dispersed CsPbBr3 nanocrystals into ZEO-1, resulting in a significant enhancement in activity (4826 μmol ⋅ h-1 ⋅ g-1 (CsPbBr3)), surpassing most of the Pt-integrated perovskite-based photocatalysts. Density functional theory (DFT) calculations and charge-carrier dynamics investigation revealed that the dramatically boosted photocatalytic performance of Pt/CsPbBr3@ZEO-1 could be attributed to the promotion of charge separation and transfer, as well as to the substantially lowered energy barrier for HER. This work highlights the advantage of extra-large-pore zeolites as the nanoscale platform to accommodate multiple photoactive components, opening up promising prospects in the design and exploitation of novel zeolite-confined photocatalysts for energy harvesting and storage.

Introducing phosphorus atoms into MoS2 nanosheets through a vapor-phase hydrothermal process for the hydrogen evolution reaction

Molybdenum disulfide (MoS2)-based electrocatalysts have been considered as promising alternatives to platinum for use in the hydrogen evolution reaction (HER). Developing MoS2 electrocatalysts with more active sites has been recognized as an efficient way to enhance the HER activity. Moreover, phase transition and heteroatom doping show great influence on the HER performance. In this work, we develop a vapor-phase hydrothermal (VPH) approach to introduce phosphorus (P) atoms into a MoS2 nanosheet array on carbon fiber cloth, which presents enhanced HER activity compared with MoS2 without P-doping. The improved performance is due to the synergistic effects of the new active sites formed by the P dopants and the sulfur (S) vacancies in the MoS2 nanosheets generated by the doping of P atoms, which increases the number of active sites. In general, the obtained P-doped MoS2/CFC exhibits a lower onset potential of 80 mV and an overpotential of 162 mV at 10 mA cm-2 than MoS2 without P-doping in 0.5 M H2SO4, accompanied by extremely large cathodic current density and excellent stability. This strategy may open up opportunities for heteroatom doping of electrocatalysts for various applications and provide a new method for material synthesis.

Composites of (NH2)-MIL-53(Al) and CBB as bifunctional electrocatalysts for overall electrochemical water splitting in all pH solutions

Electrochemical water splitting is one of the most active areas of energy research, yet the benchmark electrocatalysts used for this area are based on expensive noble metals and transition metals, thus mainly reactions in alkaline solution. MOFs and halide perovskite are novel electrochemical catalysts but unstable in water basically. Here we report a study on composites of (NH2)-MIL-53(Al) MOFs and CBB halide perovskite (Cs3Bi2Br9), which exhibit obvious activity for overall electrochemical water splitting for long-term stability with little deactivation after 10 h in all pH solutions.

Janus Zn-IV-VI: Robust Photocatalysts with Enhanced Built-In Electric Fields and Strain-Regulation Capability for Water Splitting

The use of 2D materials to produce hydrogen (H2 ) fuel via photocatalytic water splitting has been intensively studied. However, the simultaneous fulfillment of the three essential requirements-high photon utilization, rapid carrier transfer, and low-barrier redox reactions-for wide-pH-range production of H2 still poses a significant challenge with no additional modulation. By employing the first-principles calculations, it has been observed that the Janus ZnXY2 structures (X = Si/Ge/Sn, Y = S/Se/Te) exhibit significantly enhanced built-in electric fields (0.20-0.36 eV Å-1 ), which address the limitations intrinsically. Compared to conventional Janus membranes, the ductile ZnSnSe2 and ZnSnTe2 monolayers have stronger regulation of electric fields, resulting in improved electron mobility and excitonic nature (Ebinding = 0.50/0.35 eV). Both monolayers exhibit lower energy barriers of hydrogen evolution reaction (HER, 0.98/0.86 eV, pH = 7) and resistance to photocorrosion across pH 0-7. Furthermore, the 1% tensile strain can further boost visible light utilization and intermediate absorption. The optimal AC-type bilayer stacking configuration is conducive to enhancing electric fields for photocatalysis. Overall, Janus ZnXY2 membranes overcome the major challenges faced by conventional 2D photocatalysts via intrinsic polarization and external amelioration, enabling efficient and controllable photocatalysis without the need for doping or heterojunctions.

Amorphous RuPd bimetallene for hydrogen evolution reaction in acidic and alkaline conditions: a first-principles study

Metallene materials can provide a large number of active catalytic sites for the efficient use of noble metals as catalysts for hydrogen evolution reaction (HER), whereas the intrinsic activity on the surface is insufficient in crystal phase. The amorphous phase with an inherent long-range disorder can offer a rich coordinate environment and charge polarization on the surface is proposed for promoting the intrinsic catalytic activity on the surface of noble metals. Herein, we designed an amorphous RuPd (am-RuPd) structure by the first principles molecular dynamics method. The performance of the acidic HER on am-RuPd can have a huge enhancement due to the free energy change of hydrogen adsorption close to zero. In alkaline conditions, the H2O dissociation energy barrier on am-RuPd is just 0.49 eV, and it is predicted that the alkaline HER performance of am-RuPd will largely exceed that of Pt nanocrystalline sheets. This work provides a strategy for enhancing the intrinsic catalytic activity on the surface and a way to design an efficient HER catalyst based on metallene materials used in both acidic and alkaline conditions.

Computational investigation of single and multiple boron atom doped WS2 monolayers for superior electrocatalytic reduction of nitrogen

The efficient conversion of nitrogen into ammonia plays a significant role in our modern society. Therefore, the design and development of associated catalysts have become an area of major research interest. Nowadays, an increasing number of studies have been exploring single-atom or double-atom metal-free electrocatalysts for the N2 reduction reaction, where regulating the precise number of catalyst atoms anchored on the substrate posed a real challenge. Herein, with density functional theory (DFT) simulations, this study investigated the activity of single and multiple B atom doped monolayer WS2 catalysts and observed superior efficiencies for nitrogen fixation and reduction. Computational results reveal that these novel catalysts have excellent thermodynamic stability, suitable adsorption of N2, superior catalytic activity and high selectivity for the nitrogen reduction reaction. Notably, this study clearly illustrates that the steric hindrance arising from the adjacent atoms of catalytic sites can be an effective route for manipulating the catalytic performance, offering new insights for the synthesis of high efficiency catalysts. In summary, this series of novel boron doped monolayer WS2 catalysts does not require precise control of the number of catalytic atoms on the substrate, making their preparation easier.

Hydrogen adsorption on various transition metal (111) surfaces in water: a DFT forecast

The hydrogen adsorption and hydrogen evolution at the M(111), (M = Ag, Au Cu, Pt, Pd, Ni & Co) surfaces of various transition metals in aqueous suspensions were studied computationally using the DFT methods. The hydrogens are adsorbed dissociatively on all surfaces except on Ag(111) and Au(111) surfaces. The results are validated by reported experimental and computational studies. Hydrogen atoms have large mobility on M(111) surfaces due to the small energy barriers for diffusion on the surface. The hydrogen evolution via the Tafel mechanism is considered at different surface coverage ratios of hydrogen atoms and is used as a descriptor for the hydrogen adsorption capacity on M(111) surfaces. All calculations are performed without considering how the hydrogen atoms are formed on the surface. The hydrogen adsorption energies decrease with the increase in the surface coverage of hydrogen atoms. The surface coverage for the H2 evolution depends on each M(111) surface. Among the considered M(111) surfaces, Au(111) has the least hydrogen adsorption capacity and Ni, Co and Pd have the highest. Furthermore, experiments proving that after the H2 evolution reaction (HER) on Au0-NPs, and Ag0-NPs surfaces some reducing capacity remains on the M0-NPs is presented.

A review of modulation strategies for improving the catalytic performance of transition metal sulfide self-supported electrodes for the hydrogen evolution reaction

Electrocatalytic water splitting is considered to be one of the most promising technologies for large-scale sustained production of H2. Developing non-noble metal-based electrocatalytic materials with low cost, high activity and long life is the key to electrolysis of water. Transition metal sulfides (TMSs) with good electrical conductivity and a tunable electronic structure are potential candidates that are expected to replace noble metal electrocatalysts. In addition, self-supported electrodes have fast electron transfer and mass transport, resulting in enhanced kinetics and stability. In this paper, TMS self-supported electrocatalysts are taken as examples and their recent progress as hydrogen evolution reaction (HER) electrocatalysts is reviewed. The HER mechanism is first introduced. Then, based on optimizing the active sites, electrical conductivity, electronic structure and adsorption/dissociation energies of water and intermediates of the electrocatalysts, the article focuses on summarizing five modulation strategies to improve the activity and stability of TMS self-supported electrode electrocatalysts in recent years. Finally, the challenges and opportunities for the future development of TMS self-supported electrodes in the field of electrocatalytic water splitting are presented.

Why efficient bifunctional hydrogen electrocatalysis requires a change in the reaction mechanism

Hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) are both two-electron processes that culminate in the formation or consumption of gaseous hydrogen in an electrolyzer or a fuel cell, respectively. Unitized regenerative proton exchange membrane fuel cells merge these two functionalities into one device, allowing to switch between the two modes of operation. This prompts the quest for efficient bifunctional electrode materials catalyzing the HER and HOR with reasonable reaction rates at low overpotentials. In the present study using a data-driven framework, we identify a general criterion for efficient bifunctional performance in the hydrogen electrocatalysis, which refers to a change in the reaction mechanism when switching from cathodic to anodic working conditions. The obtained insight can be used in future studies based on density functional theory to pave the design of efficient HER and HOR catalysts by a dedicated consideration of the kinetics in the analysis of reaction mechanisms.

2D Metal-Organic Framework Nanosheets based on Pd-TCPP as Photocatalysts for Highly Improved Hydrogen Evolution

In this report, a 2D MOF nanosheet derived Pd single-atom catalyst, denoted as Pd-MOF, was fabricated and examined for visible light photocatalytic hydrogen evolution reaction (HER). This Pd-MOF can provide a remarkable photocatalytic activity (a H2 production rate of 21.3 mmol/gh in the visible range), which outperforms recently reported Pt-MOFs (with a H2 production rate of 6.6 mmol/gh) with a similar noble metal loading. Notably, this high efficiency of Pd-MOF is not due to different chemical environment of the metal center, nor by changes in the spectral light absorption. The higher performance of the Pd-MOF in comparison to the analogue Pt-MOF is attributed to the longer lifetime of the photogenerated electron-hole pairs and higher charge transfer efficiency.

Transforming Nature's Bath Sponge into Stacking Faults-Enhanced Ag Nanorings-Decorated Catalyst for Hydrogen Evolution Reaction

The rational design of cost-effective and efficient electrocatalysts for electrochemical water splitting is essential for green hydrogen production. Utilizing nanocatalysts with abundant active sites, high surface area, and deliberate stacking faults is a promising approach for enhancing catalytic efficiency. In this study, we report a simple strategy to synthesize a highly efficient electrocatalyst for the hydrogen evolution reaction (HER) using carbonized luffa cylindrica as a conductive N-doped carbon skeleton decorated with Ag nanorings that are activated by introducing stacking faults. The introduction of stacking faults and the resulting tensile strain into the Ag nanorings results in a significant decrease in the HER overpotential, enabling the use of Ag as an efficient HER electrocatalyst. Our findings demonstrate that manipulating the crystal properties of electrocatalysts, even for materials with intrinsically poor catalytic activity such as Ag, can result in highly efficient catalysts. Further, applying a conductive carbon backbone can lower the quantities of metal needed without compromising the HER activity. This approach opens up new avenues for designing high-performance electrocatalysts with very low metallic content, which could significantly impact the development of sustainable and cost-effective electrochemical water-splitting systems.

Electron-Sponge Nature of Polyoxometalates for Next-Generation Electrocatalytic Water Splitting and Nonvolatile Neuromorphic Devices

Designing next-generation molecular devices typically necessitates plentiful oxygen-bearing sites to facilitate multiple-electron transfers. However, the theoretical limits of existing materials for energy conversion and information storage devices make it inevitable to hunt for new competitors. Polyoxometalates (POMs), a unique class of metal-oxide clusters, have been investigated exponentially due to their structural diversity and tunable redox properties. POMs behave as electron-sponges owing to their intrinsic ability of reversible uptake-release of multiple electrons. In this review, numerous POM-frameworks together with desired features of a contender material and inherited properties of POMs are systematically discussed to demonstrate how and why the electron-sponge-like nature of POMs is beneficial to design next-generation water oxidation/reduction electrocatalysts, and neuromorphic nonvolatile resistance-switching random-access memory devices. The aim is to converge the attention of scientists who are working separately on electrocatalysts and memory devices, on a point that, although the application types are different, they all hunt for a material that could exhibit electron-sponge-like feature to realize boosted performances and thus, encouraging the scientists of two completely different fields to explore POMs as imperious contenders to design next-generation nanodevices. Finally, challenges and promising prospects in this research field are also highlighted.

Uncovering Key Factors in Graphene Aerogel-Based Electrocatalysts for Sustainable Hydrogen Production: An Unsupervised Machine Learning Approach

The application of principal component analysis (PCA) as an unsupervised learning method has been used in uncovering correlations among diverse features of aerogel-based electrocatalysts. This analytical approach facilitates a comprehensive exploration of catalytic activity, revealing intricate relationships with various physical and electrochemical properties. The first two principal components (PCs), collectively capturing nearly 70% of the total variance, attested the reliability and efficacy of PCA in unveiling meaningful patterns. This study challenges the conventional understanding that a material's reactivity is solely dictated by the quantity of catalyst loaded. Instead, it unveils a complex perspective, highlighting that reactivity is intricately influenced by the material's overall design and structure. The PCA bi-plot uncovers correlations between pH and Tafel slope, suggesting an interdependence between these variables and providing valuable insights into the complex interactions among physical and electrochemical properties. Tafel slope stands to be positively correlated with PC1 and PC2, showing an evident positive correlation with the pH. These findings showed that the pH can have a positive correlation with the Tafel slope, however, it does not necessarily reflect a direct positive correlation with the overpotential. The impact of pH on current density (j)and Tafel slope underscores the importance of adjusting pH to lower overpotential effectively, enhancing catalytic activity. Surface area (from 30 to 533 m2 g-1) emerges as a key physical property, inclusively inverse correlation with overpotential, indicating its direct role in lowering overpotential and increasing catalytic activity. The introduction of PC3, in conjunction with PC1, enriches the analysis by revealing consistent trends despite a slightly lower variance (60%). This reinforces the robustness of PCA in delineating distinct characteristics of graphene aerogels, affirming their potential implications in diverse electrocatalytic applications. In summary, PCA proves to be a valuable tool for unraveling complex relationships within aerogel-based electrocatalysts, extending insights beyond catalytic sites to emphasize the broader spectrum of material properties. This approach enhances comprehension of dataset intricacies and holds promise for guiding the development of more effective and versatile electrocatalytic materials.

The pH-Induced Increase of the Rate Constant for HER at Au(111) in Acid Revealed by Combining Experiments and Kinetic Simulation

Origins of pH effects on the kinetics of electrocatalytic reactions involving the transfer of both protons and electrons, including the hydrogen evolution reaction (HER) considered in this study, are heatedly debated. By taking the HER at Au(111) in acid solutions of different pHs and ionic concentrations as the model systems, herein, we report how to derive the intrinsic kinetic parameters of such reactions and their pH dependence through the measurement of j-E curves and the corresponding kinetic simulation based on the Frumkin-Butler-Volmer theory and the modified Poisson-Nernst-Planck equation. Our study reveals the following: (i) the same set of kinetic parameters, such as the standard activation Gibbs free energy, charge transfer coefficient, and Gibbs adsorption energy for Had at Au(111), can simulate well all the j-E curves measured in solutions with different pH and temperatures; (ii) on the reversible hydrogen electrode scale, the intrinsic rate constant increases with the increase of pH, which is in contrast with the decrease of the HER current with the increase of pH; and (iii) the ratio of the rate constants for HER at Au(111) in x M HClO4 + (0.1 - x) M NaClO4 (pH ≤ 3) deduced before properly correcting the electric double layer (EDL) effects to the ones estimated with EDL correction is in the range of ca. 10 to 40, and even in a solution of x M HClO4 + (1 - x) M NaClO4 (pH ≤ 2) there is a difference of ca. 5× in the rate constants without and with EDL correction. The importance of proper correction of the EDL effects as well as several other important factors on unveiling the intrinsic pH-dependent reaction kinetics are discussed to help converge our analysis of pH effects in electrocatalysis.

Noble Metal Phosphides: Robust Electrocatalysts toward Hydrogen Evolution Reaction

Facing with serious carbon emission issues, the production of green H2 from electrocatalytic hydrogen evolution reaction (HER) has received extensive research interest. Almost all kinds of noble metal phosphides (NMPs) consisting of Pt-group elements (i.e., Ru, Rh, Pd, Os, Ir and Pt) are all highly active and pH-universal electrocatalysts toward HER. In this review, the recent progress of NMP-based HER electrocatalysts is summarized. It is further take typical examples for discussing important impact factors on the HER performance of NMPs, including crystalline phase, morphology, noble metal element and doping. Moreover, the synthesis and HER application of hybrid catalysts consisting of NMPs and other materials such as transition metal phosphides, oxides, sulfides and phosphates, carbon materials and noble metals is also reviewed. Reducing the use of noble metal is the key idea for NMP-based hybrid electrocatalysts, while the expanded functionality and structure-performance relationship are also noticed in this part. At last, the potential opportunities and challenges for this kind of highly active catalyst is discussed.

Breaking Surface Atomic Monogeneity of Rh2 P Nanocatalysts by Defect-Derived Phosphorus Vacancies for Efficient Alkaline Hydrogen Oxidation

Breaking atomic monogeneity of catalyst surfaces is promising for constructing synergistic active centers to cope with complex multi-step catalytic reactions. Here, we report a defect-derived strategy for creating surface phosphorous vacancies (P-vacancies) on nanometric Rh2 P electrocatalysts toward drastically boosted electrocatalysis for alkaline hydrogen oxidation reaction (HOR). This strategy disrupts the monogeneity and atomic regularity of the thermodynamically stable P-terminated surfaces. Density functional theory calculations initially verify that the competitive adsorption behavior of Had and OHad on perfect P-terminated Rh2 P{200} facets (p-Rh2 P) can be bypassed on defective Rh2 P{200} surfaces (d-Rh2 P). The P-vacancies enable the exposure of sub-surface Rh atoms to act as exclusive H adsorption sites. Therein, the Had cooperates with the OHad on the peripheral P-sites to effectively accelerate the alkaline HOR. Defective Rh2 P nanowires (d-Rh2 P NWs) and perfect Rh2 P nanocubes (p-Rh2 P NCs) are then elaborately synthesized to experimentally represent the d-Rh2 P and p-Rh2 P catalytic surfaces. As expected, the P-vacancy-enriched d-Rh2 P NWs catalyst exhibits extremely high catalytic activity and outstanding CO tolerance for alkaline HOR electrocatalysis, attaining 5.7 and 14.3 times mass activity that of p-Rh2 P NCs and commercial Pt/C, respectively. This work sheds light on breaking the surface atomic monogeneity for the development of efficient heterogeneous catalysts.

Construction of urchin-like bimetallic phosphides induced by carbon dots for efficient wide pH hydrogen production

The development of an efficient noble-metal-free and pH-universal electrocatalyst for the hydrogen evolution reaction (HER) would be highly significant for hydrogen (H2) production via electrocatalytic water splitting. However, developing such a catalyst remains a formidable task. Herein, a strategy is proposed for the in situ fabrication of a novel urchin-like NiCoP microsphere catalyst (0.5CDs-NiCoP/NF) on nickel foam (NF) using carbon dots (CDs) as a directing agent. The strong bonding between the CDs and metals provides additional active sites, giving 0.5CDs-NiCoP/NF excellent electrocatalytic hydrogen evolution performance in environments ranging from acidic to basic. Moreover, the unique structure of 0.5CDs-NiCoP/NF endows this catalyst with low Tafel slopes of 73, 146 and 74 mV dec-1 for HER in acidic, neutral and alkaline conditions, respectively. This performance exceeds that of numerous other reported non-precious HER catalysts. In summary, this work offers a novel and efficient strategy for the design and synthesis of low-cost, efficient, and robust transition metal phosphides (TMPs) electrocatalysts.

Nanoengineered, Pd-doped Co@C nanoparticles as an effective electrocatalyst for OER in alkaline seawater electrolysis

Water electrolysis is considered one of the major sources of green hydrogen as the fuel of the future. However, due to limited freshwater resources, more interest has been geared toward seawater electrolysis for hydrogen production. The development of effective and selective electrocatalysts from earth-abundant elements for oxygen evolution reaction (OER) as the bottleneck for seawater electrolysis is highly desirable. This work introduces novel Pd-doped Co nanoparticles encapsulated in graphite carbon shell electrode (Pd-doped CoNPs@C shell) as a highly active OER electrocatalyst towards alkaline seawater oxidation, which outperforms the state-of-the-art catalyst, RuO2. Significantly, Pd-doped CoNPs@C shell electrode exhibiting low OER overpotential of ≈213, ≈372, and ≈ 429 mV at 10, 50, and 100 mA/cm2, respectively together with a small Tafel slope of ≈ 120 mV/dec than pure Co@C and Pd@C electrode in alkaline seawater media. The high catalytic activity at the aforementioned current density reveals decent selectivity, thus obviating the evolution of chloride reaction (CER), i.e., ∼490 mV, as competitive to the OER. Results indicated that Pd-doped Co nanoparticles encapsulated in graphite carbon shell (Pd-doped CoNPs@C electrode) could be a very promising candidate for seawater electrolysis.

Ultrathin RhCo alloy nanowires with defect-rich active sites for alkaline hydrogen evolution electrocatalysis

One-dimensional RhCo alloy nanowires (NWs) with an ultrathin thickness (2.6 nm) and abundant defect sites were prepared in an aqueous solution by a nanoconfined attachment growth route within assembled columnar micelles. Thanks to dual synergies between advantageous anisotropic ultrathin structures and alloy compositions, they endowed one-dimensional RhCo NWs with superior activity and high stability for alkaline hydrogen evolution electrocatalysis.

A Comprehensive Review on Electrocatalytic Applications of 2D Metallenes

This review introduces metallenes, a cutting-edge form of atomically thin two-dimensional (2D) metals, gaining attention in energy and catalysis. Their unique physicochemical and electronic properties make them promising for applications like catalysis. Metallenes stand out due to their abundance of under-coordinated metal atoms, enhancing the catalytic potential by improving atomic utilization and intrinsic activity. This review explores the utility of 2D metals as electrocatalysts in sustainable energy conversion, focusing on the Oxygen Evolution Reaction, Oxygen Reduction Reaction, Fuel Oxidation Reaction, and Carbon Dioxide Reduction Reaction. Aimed at researchers in nanomaterials and energy, the review is a comprehensive resource for unlocking the potential of 2D metals in creating a sustainable energy landscape.

Double-single-atom MoCu-embedded porous carbons boost the electrocatalytic N2 reduction reaction

NH3 is an essential ingredient of chemical, fertilizer, and energy storage products. Industrial nitrogen fixation consumes an enormous amount of energy, which is counter to the concept of carbon neutrality, hence eNRR ought to be implemented as a clean alternative. Herein, we propose a double-single-atom MoCu-embedded porous carbon material derived from uio-66 (MoCu@C) by plasma-enhanced chemical vapor deposition (PECVD) to boost eNRR capabilities, with an NH3 yield rate of 52.4 μg h-1 gcat.-1 and a faradaic efficiency (FE) of 27.4%. Advanced XANES shows that the Mo active site receives electrons from Cu, modifies the electronic structure of the Mo active site and enhances N2 adsorption activation. The invention of rational MoCu double-single-atom materials and the utilization of effective eNRR approaches furnish the necessary building blocks for the fundamental study and practical application of Mo-based materials.