Frustrated Lewis pair chemistry: development and perspectives

The role of linkers and frustrated lewis pairs catalysts in the formation of zwitterionic 1,2-anti-addition product with non-conjugated terminal diacetylenes: A computational study

This study presents a computational investigation into the mechanistic pathway and the linker units involved in forming the zwitterionic 1,2-anti-addition product of non-conjugated diacetylenes, di(propargyl)ether (DPE), di(prop-2yn-1yl)sulfane (DPS) and 1,6-Heptadiyne (HD) catalyzed by the inter-molecular phosphine/borane frustrated Lewis pairs (FLPs), i.e., PPh2[C6H3(CF3)2](P-CF)/[B(C6F5)3]([B]) and P(o-tolyl)3(P-tol)/[B(C6F5)3]([B]). The potential energy surface (PES) calculations reveal that the anti-addition of P-CF to the internal C-atoms of acetylene units is energetically more favored than that of the addition of P-tol in DPE, DPS, and HD by ∼10.0, ∼9.2, and ∼6.0 kcal/mol, respectively. The calculations performed with DPE contain "-O-," linker unit exhibits superior reactivity than DPS and HD, which suggests the electronegativity of linkers plays a significant role and facilitates the addition of Lewis bases. The higher electronegativity of linker units enables the 1,2-addition reaction by lowering the free energy activation barriers, as observed in the DFT calculations. The Molecular Electrostatic Potential (MESP) study shows that the electrostatic interactions favor the addition of P-CF to the active acetylene positions (C5/C4/C4) of [B]-DPE/DPS/HD-π complexes than the P-tol. The Distortion/Interaction (D/I) analysis reveals that transition states involving P-CF (TS1, TS3, and TS5) exhibit more interaction energy (ΔEInt) and less distortion energies (ΔEd) than that of the P-tol (TS2, TS4, and TS6). Further, the Energy Decomposition Analysis (EDA) also rationalizes the preferential approach of the electron-deficient Lewis base over the electron-rich one on the basis of the significant contribution of orbital interaction energies (ΔEorbital) in the cases of P-CF; TS1, TS3, and TS5. This study suggests that the electronic effects of substrates and the FLPs are crucial to facilitate the desired products formed with non-conjugated terminal alkynes.

Novel Lewis Acid-Base Interactions in Polymer-Derived Sodium-Doped Amorphous Si-B-N Ceramic: Towards Main-Group-Mediated Hydrogen Activation

Interest is growing in transition metal-free compounds for small molecule activation and catalysis. We discuss the opportunities arising from synthesizing sodium-doped amorphous silicon-boron-nitride (Na-doped a-SiBN). Na+ cations and 3-fold coordinated BIII moieties were incorporated into an amorphous silicon nitride network via chemical modification of a polysilazane followed by pyrolysis in ammonia (NH3) at 1000 °C. Emphasis is placed on the mechanisms of hydrogen (H2) activation within Na-doped a-SiBN structure. This material design approach allows the homogeneous distribution of Na+ and BIII moieties surrounded by SiN4 units contributing to the transformation of the BIII moieties into 4-fold coordinated geometry upon encountering H2, potentially serving as frustrated Lewis acid (FLA) sites. Exposure to H2 induced formation of frustrated Lewis base (FLB) N-= sites with Na+ as a charge-compensating cation, resulting in the in situ formation of a frustrated Lewis pair (FLP) motif (≡BFLA⋅⋅⋅Hδ-⋅⋅⋅Hδ+⋅⋅⋅:N-(Na+)=). Reversible H2 adsorption-desorption behavior with high activation energy for H2 desorption (124 kJ mol-1) suggested the H2 chemisorption on Na-doped a-SiBN. These findings highlight a future landscape full of possibilities within our reach, where we anticipate main-group-mediated small molecule activation will have an important impact on the design of more efficient catalytic processes and the discovery of new catalytic transformations.

Elucidating the intrinsic relationship between redox properties of CeO2 and CH4 oxidation activity: A theoretical perspective

Methane (CH4) oxidation is an important reaction to reduce the greenhouse effect caused by incomplete combustion of CH4. Here, we explored the mechanism of CH4 oxidation catalyzed by CeO2 and Ni-doped CeO2, focusing on the redox properties of these catalyst surfaces, using density functional theory (DFT). We found that the barriers for CH4* activation and H2O* formation are correlated with the surface redox capacity, which is enhanced by Ni doping. Furthermore, the complete reaction mechanism is explored by DFT calculations and microkinetic simulations on bare and Ni-doped CeO2 surfaces. Our calculations suggest that the doping of Ni leads to a much higher overall reactivity, due to a balance between the CH4* activation and H2O* formation steps. These results provide insights into the CH4 oxidation mechanism and the intrinsic relationship between redox properties and the activity of CeO2 surfaces.

Low-valent group 6 metals/Al(C6F5)3 donor-acceptor systems for CO2 activation and cleavage

Donor-acceptor systems for CO2 activation combining a formally zero-valent group 6 metal as the donor with the Lewis acid Al(C6F5)3 (AlCF) are reported. They were obtained from AlCF adducts of N2-complexes by N2-to-CO2 substitution. One species was capable of C-O cleavage. The boron analogues led to intractable mixtures.

Reactivity of N-(isocyanoimino)triphenylphosphorane toward group 13 Lewis acids

The species Ph3PNNC 1 reacts with the group 13 Lewis acids E(C6F5)3 (E = B or Al), HB(C6F5)2, ClAl(C6F5)2 and ECl3 (E = Ga or In) to give the Lewis acid-base adduct Ph3PNNCB(C6F5)3 2, the zwitterionic product (Ph3PNH)B(C6F5)2CNB(C6F5)2H 3, the chelated salts [(Ph3PNNC(CN)NPPh3)ER2][EX2R2] (E = Al, R = X = C6F5, 4; E = Al, R = C6F5, X = Cl, 5; E = Ga, R = X = Cl, 6), and the neutral species [(Ph3PNNC(CN)NPPh3)InCl3] 7. The nature of these variations in reactivity are rationalized and the potential utility considered.

Multielectron Reduction of Nitrosoarene via Aluminylene-Silylene Cooperation

The cooperative effects of main-group elements pave the way for novel chemical transformations. However, the potential of bimetallic complexes featuring the most abundant aluminum and silicon elements remains largely unexplored. In this study, we present the synthesis and characterization of bis(silylene)-stabilized aluminylene 2. The cooperation between aluminylene and silylene allows for the facile cleavage of the N-O bond in nitrosoarenes, producing an aluminum imide complex 4 and tetracyclic oxazasilaalanes 5 and 6, and also promotes the dearomatization of 2-methylquinoline, yielding a silylalane 7. In addition, 2 is an effective precatalyst for the reductive coupling of nitrosoarenes to azoxyarenes. These results outline an approach for orchestrating aluminum and silicon cooperation to facilitate chemical bond activation.

Investigation of Phosphazene Superbase Interactions with [PCl2N]3

In this study, the reaction between phosphazene superbases and a chlorophosphazene trimer ([PCl2N]3) has been investigated. In this room temperature reaction, the phosphazene superbase (Me2N)3PN(Me2N)2P═NEt, commonly known as P2Et, was shown to behave as a nucleophile, displacing one of the chlorides from [PCl2N]3 and producing the tadpole-like structure 1. The reaction described herein is one of the few instances of a phosphazene superbase behaving as a nucleophile rather than a Brønsted base. Once formed, this structure contains contrasting reactivity, containing a weakly basic phosphazene head while maintaining a highly basic phosphazene tail of the tadpole. The mechanism of the reaction was explored by investigating the potential energy surface through density functional theory calculations at the B3LYP/6-311+G(d,p) level of quantum mechanical theory. It was determined that the reaction of P2Et with [PCl2N]3 followed a stepwise process beginning with the substitution of P2Et onto [PCl2N]3 with the concurrent loss of chloride. Subsequently, the chloride attacks the ethyl group of the P2Et moiety, and ethyl chloride is released, producing 1. Compound 1 was further characterized via 31P NMR spectroscopy, mass spectrometry, and X-ray crystallography.

Anchoring Frustrated Lewis Pair Active Sites on Copper Nanoclusters for Regioselective Hydrogenation

In recent years, the concept of Frustrated Lewis Pairs (FLPs), which consist of a combination of Lewis acid (LA) and Lewis base (LB) active sites arranged in a suitable geometric configuration, has been widely utilized in homogeneous catalytic reactions. This concept has also been extended to solid supports such as zeolites, metal oxide surfaces, and metal/covalent organic frameworks, resulting in a diverse range of heterogeneous FLP catalysts that have demonstrated notable efficiency and recyclability in activating small molecules. This study presents the successful immobilization of FLP active sites onto the surface of ligand-stabilized copper nanoclusters with atomic precision, leading to the development of copper nanocluster FLP catalysts characterized by high reactivity, stability, and selectivity. Specifically, thiol ligands containing 2-methoxyl groups were strategically designed to stabilize the surface of [Cu34S7(RS)18(PPh3)4]2+ (where RSH = 2-methoxybenzenethiol), facilitating the formation of FLPs between the surface copper atoms (LA) and ligand oxygen atoms (LB). Experimental and theoretical investigations have demonstrated that these FLPs on the cluster surface can efficiently activate H2 through a heterolytic pathway, resulting in superior catalytic performance in the hydrogenation of alkenes under mild conditions. Notably, the intricate yet precise surface coordination structures of the cluster, reminiscent of enzyme catalysts, enable the hydrogenation process to proceed with nearly 100% selectivity. This research offers valuable insights into the design of FLP catalysts with enhanced activity and selectivity by leveraging surface/interface coordination chemistry of ligand-stabilized atomically precise metal nanoclusters.

Adducts of Lewis acidic stibanes with phosphane chalcogenides

Starting from ClSbRF2 (RF = C2F5, 3,5-(CF3)2C6H3) and H(E)P(tBu)2 (E = O, S), we prepared the oxy- and sulphanediyl-bridged adducts RF2Sb(Cl)-E-(H)P(tBu)2, which are stable against the elimination of HCl. The different electron-withdrawing substituents and chalcogen bridging units influence the size of the Sb-E-P angle. ClSb(C2F5)2 and nBu3SnH react to give HSb(C2F5)2, which seems to interact weakly with H(O)P(tBu)2 in solution as observed via NMR. All products were characterised by NMR spectroscopy and all the stable ones were additionally characterised by X-ray diffraction and elemental analyses.

Frustrated Al/M Heterobimetallic Complexes (M = Cr, Mo, W) That Exhibit Both Lewis and Radical Pair Behavior

Exploration of new heterobinuclear Al/M combinations is relevant to contemporary strategies for cooperative bond activation. Here, we report the synthesis and characterization of six new Al/M heterobimetallic complexes (M = Cr, Mo, W) that exhibit end-on "isocarbonyl"-type Al─O═C═M bridges with metalloketene character rather than featuring Al─M─C≡O motifs with metal-metal bonding. The new compounds were characterized experimentally by nuclear magnetic resonance and infrared spectroscopies and theoretically using density functional theory, natural bond orbital, and quantum theory of atoms in molecules calculations. Factors influencing Al─O═C═M vs Al─M─C≡O isomerism were probed both experimentally and computationally. Crossover experiments between different group VI Al/M derivatives and regioselective epoxide ring opening indicate that the Al/M complexes act as masked frustrated Lewis pairs in solution under certain conditions. However, crossover experiments between group VI Al/M complexes and a previously studied Al-Fe complex, as well as computational modeling, imply that the same complexes can also reasonably act as masked frustrated radical pairs (FRPs). FRP reactivity with the group VI Al/M complexes was achieved under photochemical conditions, producing unsaturated metal-carbonyl dimers [(CpCr)2(CO)3]2- and [Mn2(CO)8]2-, which would otherwise be unstable under standard conditions but that are isolable here due to Al(III) coordination. The metal-metal bonding in these unsaturated metal-carbonyl dimers was also analyzed theoretically.

Structure-constraint induced increase in Lewis acidity of tris(ortho-carboranyl)borane and selective complexation with Bestmann ylides

The Lewis acidity of tris(ortho-carboranyl)borane has been slightly increased by mimicking the structural evolution from triarylborane to 9-aryl-9-borafluorene. The o-carborane-based analogue (C2B10H10)2B(C2B10H11), obtained via salt elimination between LiC2B10H11 and (C2B10H10)2BBr, has been fully characterized. Gutmann-Beckett and computational fluoride/hydride ion affinity (FIA/HIA) studies have confirmed the increase in Lewis acidity, which is attributable to structural constraint imposed by the CC-coupling between two carboranyl groups. Selective complexation of (C2B10H10)2B(C2B10H11) with Bestmann ylides R3PCCO (R = Ph, Cy) has been achieved, enabling further conversion into the zwitterionic phospholium salt through NHC-catalyzed proton transfer.

Hydride Shuttle Catalysis: From Conventional to Inverse Mode

Hydride shuttle catalysis has emerged as a powerful synthetic platform, enabling the selective formation of C-C bonds to yield sp3-rich structures. By virtue of the compelling reactivity of sterically encumbered Lewis acids from the frustrated Lewis pair regime, hydride shuttle catalysis enables the regioselective functionalization of alkyl amines at either the α- or β-position. In contrast to classical Lewis acid reactivity, the increased steric hindrance prevents interaction with the Lewis basic amine itself, instead leading to reversible abstraction of a hydride from the amine α-carbon. The created positive charge facilitates the occurrence of transformations before hydride rebound or a similar capture event happen. In this Perspective, we outline a broad selection of transformations featuring hydride shuttle catalysis, as well as the recently developed approach of inverse hydride shuttle catalysis. Both strategies give rise to a wide array of functionalized amines and offer elegant approaches to otherwise elusive bond formations.

Disilicon-Mediated Carbon Monoxide Activation: From a 1,2,3-Trisila- to 1,3-Disilacyclopentadienes with Hypercoordinate λ4Si-λ3C Double Bonds

The facile reaction of the SiPh2-bridged bis-silylene (LSi:)2SiPh2 (L=PhC(NBut)2) with diphenylacetylene affords the unprecedented 1,2,3-trisilacyclopentadiene (LSi)2(PhC)2SiPh2 1 with a hypercoordinate λ4Si-λ3Si double bond. Compound 1 is very oxophilic and consumes three molar equivalents of inert N2O to form the bicyclic oxygenation product 2 through O-atom insertion in the Si=Si and Si-Si bonds. Strikingly, 1 can completely split the C≡O bonds of carbon monoxide under ambient conditions (1 atm, room temperature), yielding the 1,3-disilacyclopentadiene 3, representing the first hypercoordinate example of a cyclosilene with a λ4Si-λ3C double bond. Likewise, reaction of Xyl-NC (Xyl=2,6-dimethylphenyl), an isocyanide isoelectronic with CO, with 1 furnishes the related 1,3-disilacyclopentadiene 4 but with an amidinato silylene pendent attached to the Si=C carbon ring atom.

The Role of Frustrated Lewis Pair in Catalytic Transfer Hydrogenation of Furfural using Nickel Single-Atom Catalysts: A Theoretical Study

The burgeoning field of frustrated Lewis pair (FLP) heterogeneous catalysts has garnered significant interest in recent years, primarily due to their inherent ability to activate H-source molecules, thereby facilitating hydrogenation reactions. In this study, non-precious transition metal atoms were anchored onto several models of pyridinic nitrogen incorporated graphene sheet. Theoretical calculations substantiated energy barriers as low as 0.10 eV for isopropanol activation, thereby positioning these catalysts as highly promising candidates for catalytic transfer hydrogenation of furfural. Electronic structure analyses revealed that the H-O bond breakage in isopropanol molecules was significantly facilitated by the presence of FLP sites within the catalysts. Notably, both Ni-C2N and Ni-N6-C demonstrated exceptional potential as selective catalysts for the hydrogenation of furfural into furfuryl alcohol, exhibiting remarkably low barriers of only 0.65-0.72 eV for the rate-determining steps. The findings in this study are helpful to design FLP containing single atom catalysts for hydrogenation reactions.

Characterization of a Lewis adduct in its inner and outer forms

The entrance channel of bimolecular reactions sometimes involves the formation of outer complexes as weakly bound, fleeting intermediates. Here, we characterize such an outer complex in a system that models the bimolecular, C-O bond-forming reaction of a phosphine oxide Lewis base with a carbenium Lewis acid. Crystallographic studies show that the C-O distance in the outer form exceeds that of the final or inner adduct by 1.1 angstroms. As the system samples the two forms of the complex, which correspond to minima on the corresponding potential energy surface, the C-O linkage switches from a secondary interaction in the outer complex to a dative bond in the inner complex. This phenomenon is harnessed as a functional feature to stabilize xanthylium-based photoredox catalysts.

Synthesis and Photochemical Uncaging of Alkene-Protected, Polymer-Bound Vicinal Frustrated Lewis Pairs

Polymeric materials bearing Frustrated Lewis Pair (FLP) functionality are promising candidates for use as heterogeneous catalysts and adaptive materials, but synthetic access to FLP-functional polymers remains limited due to the incompatibility of FLPs with standard polymerization chemistries. Herein, we describe a synthetic approach that "cages" highly reactive vicinal phosphine-borane FLPs as covalent alkene adducts, which are stable to Ni-mediated vinyl addition polymerization. We discovered that the caged FLP adducts can be photochemically activated to liberate vicinal FLPs, enabling spatiotemporally controlled release of FLPs from polymeric precursors.

Borane-Catalyzed Enantioselective α-Alkylation of Unactivated 2-Alkylbenzoxazoles with Electron-Deficient Olefins

Chiral borane-catalyzed reactions have recently emerged as a powerful tool for the enantioselective production of chiral scaffolds. In this study, we demonstrated for the first time that a chiral bisborane catalyst can be used for the α-functionalization of 2-alkylazaarenes; specifically, we accomplished unprecedented highly enantioselective α-alkylation of unactivated 2-alkylbenzoxazoles with electron-deficient olefins. The strong Lewis acidity and the steric bulk of the bisborane catalyst were essential to the observed reactivity and selectivity.

Seven-Coordinate Group 6 Metal Hydrides Obtained by H2 Activation at B(C6F5)3 Adducts of N2 Complexes: Frustrated Lewis Pair-Type Reactivity of The B-N Linkage

The adducts 2M,R of general formula trans-[(L)M{R2P(CH2)2PR2}2{N2B(C6F5)3}] (L=ø or N2, M=Mo or W, R=Et or Ph), formed from Lewis acid-base pairing of B(C6F5)3 to a dinitrogen ligand of zero-valent group 6 bis(phosphine) complexes trans-[M{R2P(CH2)2PR2}2(N2)2] are shown to react with dihydrogen to afford hepta-coordinated bis(hydride) complexes [M(H)2{R2P(CH2)2PR2}{N2B(C6F5)3}] 3M,R which feature the rare ability to activate both dinitrogen and dihydrogen at a single metal center, except in the case where M=Mo and R=Ph for which fast precipitation of insoluble [Mo(H)4(dppe)2] (dppe=1,2-bis(diphenylphosphino)ethane) occurs. The frustrated Lewis pair (FLP)-related reactivity of the B-N linkage in compounds 3W,R was explored and led to distal N functionalization without involvement of the hydride ligands. It is shown in one example that the resulting bis(hydride) diazenido compounds may also be obtained through a sequence involving first FLP-type N-functionalization followed by oxidative addition of H2. Those oily compounds were found to have limited stability in solution or in their isolated states. Finally, treatment of 3W,Et with the Lewis base N,N-dimethylaminopyridine (DMAP) affords the simple but unknown bis(hydride)-dinitrogen species [W(H)2(depe)2(N2)] 11Et (depe=1,2-bis(diethylphosphino)ethane) which direct, selective formation from trans-[W(N2)2(depe)2] is not possible.

Predicting Activation of Small Molecules Including Dinitrogen via a Carbene with a σ0π2 Electronic Configuration

Although the main group species in the s and p blocks have begun to gain prominence in the field of dinitrogen (N2) activation in recent years, reports of carbene-mediated N2 activation remain particularly rare, especially for carbenes with a σ0π2 electronic configuration. Herein, we demonstrate examples of N2 activation initiated by a carbene with a σ0π2 electronic configuration and consequent N2 hydroboration reaction (with a reaction barrier as low as 19.9 kcal/mol) via density functional theory calculations. Meanwhile, the "push-pull" electronic effect upon introduction of a hydroborenium complex facilitates the generation of a thermodynamically and kinetically more stable product. In addition, such a σ0π2 carbene can also activate a series of H-X (X = H, CH3, or Bpin) bonds through an oxidative addition process with activation energies ranging from 6.0 to 18.0 kcal/mol. Our findings highlight the importance of σ0π2 carbenes in the field of small molecule activation, especially N2 activation.

Predicting Small Molecule Activations Including Dinitrogen Based on an Inorganic Benzene B4N2 Framework

Although main group species have emerged in the field of dinitrogen activation in recent years, the reported examples are particularly rare in comparison with transition metal complexes due to their significant challenges. Herein, we demonstrate a [4 + 2] cycloaddition reaction of N2 (with an activation energy as low as 12.5 kcal mol-1) initiated by an inorganic benzene via density functional theory calculations. Such N2 activation is supported by the elongated nitrogen-nitrogen bond distance (dNN), decreased vibration frequency (νNN), and weakened Wiberg bond index (WBINN). Subsequently, the "push-pull" electronic effect, formed by introducing a Lewis acid, HB(C6F5)2, facilitates the generation of thermodynamically more stable products. In addition, this inorganic benzene could also be used to activate a series of small molecules, including carbon dioxide, acetylene, ethylene, and acetonitrile with reaction barriers ranging from 4.7 to 11.6 kcal mol-1. Our findings provide an alternative approach to N2 activation and functionalization, theoretically validating the feasibility of the dual Lewis acid strategy for dinitrogen activation.

2-Alkylphosphino-1-boraadamantanes

Boraadamantanes are a privileged class of caged group 13 compounds having a trigonal pyramidal (non-VSEPR) ground-state. The Lewis acid-base chemistry of this type of compound is underdeveloped when compared to acyclic derivatives. This report provides the first examples of bifunctional boraadamantanes with an appended phosphine moiety (also the first boraadamantanes having a phosphorus-boron bond). Using this scaffold, boraadamantane coordination compounds are accessed for the first time.

Dynamic Gas-Bridged Bond: An Opportunity of Fabricating Dynamic Assembled Materials with Gas

Gas molecules, as a family of unique polyatomic building blocks, have long been considered hard to involve in molecular assembly or construct assembled materials due to their structural simplicity yet paucity of defined interacting sites. To solve this non-trivial challenge, a core idea is to break the limit of current ways of bonding gas molecules, endowing them with new modes of interactions that match the basic requirements of molecular assembly. In recent years, a new concept, named the dynamic gas-bridged bond (DGB), has emerged, which allows for gas molecules to constitute a dynamic bridging structure between other building blocks with the aid of frustrated Lewis pairs. This makes it possible to harness gas in a supramolecular or dynamic manner. Herein, this perspective discusses distinct dynamic natures of DGBs and manifests their particular functions in various fields, including the control of molecular/polymeric self-assembly nanostructures, creation of multidimensional assembled materials, and recyclable catalysts. The future research direction and challenges of dynamic gas-bridged chemistry toward gas-programmed self-assembly and gas-constructed adaptive materials are highlighted.

Structural Flexibility is a Decisive Factor in FLP Dihydrogen Cleavage with Tetrahedral Lewis Acids: A Silane Case Study

Dihydrogen activation is the paradigmatic reaction of frustrated Lewis pairs (FLPs). While trigonal-planar Lewis acids have been well established in this transformation, tetrahedral Lewis acids are surprisingly limited. Indeed, several cases were computed as thermodynamically and kinetically feasible but exhibit puzzling discrepancies with experimental results. In the present study, a computational investigation of the factors influencing dihydrogen activation are considered by large ensemble sampling of encounter complexes, deformation energies and the activation strain model for a silicon/nitrogen FLP and compared with a boron/phosphorous FLP. The analysis adds the previously missing dimension of Lewis acids' structural flexibility as a factor that influences preexponential terms beyond pure transition state energies. It sheds light on the origin of "overfrustration" (defined herein), indicates structural constraint in Lewis acids as a linchpin for activation of weak donor substrates, and allows drawing a more refined mechanistic picture of this emblematic reactivity.

Aluminum in Frustrated Lewis Pair Chemistry

This review article describes the development of the use of aluminum compounds in the chemistry of frustrated Lewis pairs (FLPs) over the last 14 years. It also discusses the synthesis, reactivity and catalytic applications of intermolecular, intramolecular and so-called hidden FLPs with phosphorus, nitrogen and carbon Lewis bases. The intrinsically higher acidity of aluminum compounds compared to their boron analogs opens up different reaction pathways. The results are presented in a more or less chronological order. It is shown that Al FLPs react with a variety of polar and non-polar substrates and form both stable adducts and reversibly activate bonds. Consequently, some catalytic applications of the title compounds were presented such as dimerization of alkynes, hydrogenation of tert-butyl ethylene and imines, C-F bond activation, reduction of CO2, dehydrogenation of amine borane and transfer of ammonia. In addition, various Al FLPs were used as initiators in polymerization reactions.

Fluorination/Dearomatization of C6F5 Groups: An FLP Route to an Electrophilic Borane and Non-Coordinating Anions

B(C6F5)3 and the corresponding anion [B(C6F5)4]- are ubiquitous in main group and transition metal chemistry. Known derivatives are generally limited to the incorporation of electron donating substituents. Herein we describe electrophilic fluorination and dearomatization of such species using XeF2 in the presence of BF3 or Lewis acidic cations. In this fashion the anions [HB(C6F5)3]-, [B(C6F5)4]- and [(C6F5)3BC≡NB(C6F5)3]-, are converted to [FB(C6F7)3]-, [B(C6F7)4]-, and [(C6F7)3BC≡NB(C6F7)3]-, respectively. Similarly, the borane adducts (L)B(C6F7)3 (L=MeCN, OPEt3) are produced. These rare examples of electrophilic attack of electron deficient rings proceed as [XeF][BF4] acts as a frustrated Lewis pair effecting fluorination and dearomatization of C6F5 rings.

A geminal antimony(iii)/phosphorus(iii) frustrated Lewis pair

The geminal Lewis pair (F5C2)2SbCH2P(tBu)2 (1) was prepared by reacting (F5C2)2SbCl with LiCH2P(tBu)2. Despite its extremely electronegative pentafluoroethyl substituents, the neutral 1 exhibits a relatively soft acidic antimony function according to the HSAB concept (hard-soft acid-base). These properties lead to a reversibility in the binding of CS2 to 1, as observed by VT-NMR spectroscopy, while no reaction with CO2 is observed. The reaction behaviour towards heterocumulenes and the specific interaction situation in the CS2 adduct were analysed by quantum chemical calculations. The FLP-type reactivity of 1 has also been demonstrated by reaction with a variety of small molecules (SO2, PhNCO, PhNCS, (MePh2P)AuCl). The reactions of 1 with PhNCO and PhNCS led to different types of cyclic addition products: PhNCO adds with its N[double bond, length as m-dash]C bond and PhNCS adds preferentially with its C[double bond, length as m-dash]S bond. The reaction of 1 with (MePh2P)AuCl gave an adduct {[(F5C2)2SbCH2(tBu)2P]2Au}+ with a clamp-like structure binding a chloride anion by its two antimony atoms in chelate mode. Compound 1 and its adducts have been characterised by X-ray diffraction experiments, multinuclear NMR spectroscopy, elemental analyses and computational calculations (DFT, QTAIM, IQA).

Antimony Redox Catalysis: Hydroboration of Disulfides through Unique Sb(I)/Sb(III) Redox Cycling

The stibinidene ArSbI (Ar = [2,6-(tBuN═CH)2-C6H3], 1) reacts with S2Tol2 (Tol = p-tolyl) to form ArSbIII(STol)2 (2), which upon treatment with pinacolborane, regenerates 1. These processes unveil an unprecedented antimony redox catalysis involving Sb(I)/Sb(III) cycling for the hydroboration of organic disulfides. Elementary reaction studies and density functional theory calculations support that the catalysis mimics transition metal processes, proceeding through oxidative addition, ligand metathesis, and reductive elimination. The thiophenols and sulfidoborates generated from the hydroboration of disulfides react in situ with α,β-unsaturated carbonyl compounds with the assistance of 1 as a base catalyst. These tandem reactions establish a one-pot synthetic method for β-sulfido carbonyl compounds, in which a stibinidene functions as a redox catalyst and a base catalyst successively, illustrating the versatility and efficiency of antimony catalysis in organic synthesis.

Coordination of Al(C6F5)3 vs. B(C6F5)3 on group 6 end-on dinitrogen complexes: chemical and structural divergences

The coordination of the Lewis superacid tris(pentafluorophenyl)alane (AlCF) to phosphine-supported, group 6 bis(dinitrogen) complexes [ML2(N2)2] is explored, with M = Cr, Mo or W and L = dppe (1,2-bis(diphenylphosphino)ethane), depe (1,2-bis(diethylphosphino)ethane), dmpe (1,2-bis(dimethylphosphino)ethane) or 2 × PMe2Ph. Akin to tris(pentafluorophenyl)borane (BCF), AlCF can form 1 : 1 adducts by coordination to one distal nitrogen of general formula trans-[ML2(N2){(μ-η1:η1-N2)Al(C6F5)3}]. The boron and aluminium adducts are structurally similar, showing a comparable level of N2 push-pull activation. A notable exception is a bent (BCF adducts) vs. linear (AlCF adducts) M-N-N-LA motif (LA = Lewis acid), explained computationally as the result of steric repulsion. A striking difference arose when the formation of two-fold adducts was conducted. While in the case of BCF the 2 : 1 Lewis pairs could be observed in equilibrium with the 1 : 1 adduct and free borane but resisted isolation, AlCF forms robust 2 : 1 adducts trans-[ML2{(μ-η1:η1-N2)Al(C6F5)3}2] that isomerise into a more stable cis configuration. These compounds could be isolated and structurally characterized, and represent the first examples of trinuclear heterometallic complexes formed by Lewis acid-base interaction exhibiting p and d elements. Calculations also demonstrate that from the bare complex to the two-fold aluminium adduct, substantial decrease of the HOMO-LUMO gap is observed, and, unlike the trans adducts (1 : 1 and 1 : 2) for which the HOMO was computed to be a pure d orbital, the one of the cis-trinuclear compounds mixes a d orbital with a π* one of each N2 ligands. This may translate into a more favourable electrophilic attack on the N2 ligands instead of the metal centre, while a stabilized N2-centered LUMO should ease electron transfer, suggesting Lewis acids could be co-activators for electro-catalysed N2 reduction. Experimental UV-vis spectra for the tungsten family of compounds were compared with TD-DFT calculations (CAM-B3LYP/def2-TZVP), allowing to assign the low extinction bands found in the visible spectrum to unusual low-lying MLCT involving N2-centered orbitals. As significant red-shifts are observed upon LA coordination, this could have important implications for the development of visible light-driven nitrogen fixation.

Use of Microwave Dielectric Spectroscopy for the In Actu Assessment of Frustrated Lewis Pair Encounter Complexes

Frustrated Lewis pairs (FLPs) offer an important and promising paradigm for main group catalysis. Reported here is the use of microwave dielectric spectroscopy for the in actu detection of FLP encounter complexes. This technique focuses on the room-temperature measurement of the loss component of microwave permittivity (ε2) over the bandwidth from 0.5 to 6.8 GHz. The microwave loss measured for a Lewis pair in a toluene host solution is compared with the losses of the individual components when measured separately, and the difference in loss Δε2 is used to characterize the electrostatic interaction between the pair. The Δε2 value shows a direct correlation with an ability for the FLP encounter complex to split hydrogen gas and abstract hydrogen from γ-terpinene and has led to the identification of a novel FLP encounter complex, tris-pentafluorophenyl borane-eucalyptol pairing.

Oxidation-dependent Lewis acidity in chalcogen adducts of Sb/P frustrated Lewis pairs

The reactions of the frustrated Lewis pair (F5C2)2SbCH2P(tBu)2 with oxygen, sulphur, selenium and tellurium led to the mono-oxidation products (F5C2)2SbCH2P(E)(tBu)2 (E = O, S, Se, Te). Further oxidation of these chalcogen adducts with tetrachloro-ortho-benzoquinone (o-chloranil) gave (F5C2)2Sb(CH2)(μ-E)P(tBu)2·CatCl (CatCl = o-O2C6Cl4) with a central four-membered ring heterocycle for E = O, S, and Se. For E = Te the elimination of elemental tellurium led to an oxidation product with two equivalents of o-chloranil, (F5C2)2SbCH2P(tBu)2·2CatCl, which is also accessible by reaction of (F5C2)2SbCH2P(tBu)2 with o-chloranil. The synthesised compounds were characterised by NMR spectroscopy and X-ray structure analyses, and the structural properties were analysed in the light of the altered Lewis acidity due to the oxidation of the antimony atoms.

Bisgermylene-Stabilized Stannylone: Catalytic Reduction of Nitrous Oxide and Nitro Compounds via Element-Ligand Cooperativity

This study describes the synthesis, structural characterization, and catalytic application of a bis(germylene)-stabilized stannylone (2). The reduction of digermylated stannylene (1) with 2.2 equiv of potassium graphite (KC8) leads to the formation of stannylone 2 as a green solid in 78% yield. Computational studies showed that stannylone 2 possesses a formal Sn(0) center and a delocalized 3-c-2-e π-bond in the Ge2Sn core, which arises from back-donation of the p-type lone pair electrons on the Sn atom to the vacant orbitals of the Ge atoms. Stannylone 2 can serve as an efficient precatalyst for the selective reduction of nitrous oxide (N2O) and nitroarenes (ArNO2) with the formation of dinitrogen (N2) and hydrazines (ArNH-NHAr), respectively. Exposure of 2 with N2O (1 atm) resulted in the insertion of two oxygen atoms into the Ge-Ge and Ge-Sn bonds, yielding the germyl(oxyl)stannylene (3). Moreover, the stoichiometric reaction of 2 with 1-chloro-4-nitrobenzene afforded an amido(oxyl)stannylene (4) through the complete scission of the N-O bonds of the nitroarene. Stannylenes 3 and 4 serve as catalytically active species for the catalytic reduction of nitrous oxide and nitroarenes, respectively. Mechanistic studies reveal that the cooperation of the low-valent Ge and Sn centers allows for multiple electron transfers to cleave the N-O bonds of N2O and ArNO2. This approach presents a new strategy for catalyzing the deoxygenation of N2O and ArNO2 using a zerovalent tin compound.

Formation and Reactions of Brønsted and Lewis Acid Adducts with Electron-Rich Heteroaromatic Compounds

Electron-rich heteroaromatics, such as furan, thiophene and pyrrole, as well as their benzo-condensed derivatives, are of great interest as components of natural products and as starting substances for various products including high-tech materials. Although their reactions with Brønsted and Lewis acids play important roles, in particular as the primary step of various transformations, they are often disregarded and mechanistically not understood. The present publication gives a first overview about this chemistry focusing on the parent compounds. It comprises reactions with strong Brønsted acids forming adducts that can undergo intramolecular proton and/or substituent transfer reactions, ring openings or ring transformations into other heterocycles, depending on their structure. Interactions with weak Brønsted acids usually initiate oligomerizations/polymerizations. A similar behaviour is observed in reactions of these heteroaromatics with Lewis acids. Special effects are achieved when the Lewis acids are activated through primary protonation. Deuterated Brønsted acids allow straight forward deuteration of electron-rich heteroaromatics. Mercury salts as extremely weak Lewis acids cause direct metalation in a straight forward way replacing ring H-atoms yielding organomercury heterocycles. This review will provide comprehensive information about the chemistry of adducts of such heterocycles with Brønsted and Lewis acids enabling chemists to understand the mechanisms and the potential of this field and to apply the findings in future syntheses.

A Highly Sterically Encumbered Boron Lewis Acid Enabled by an Organotellurium-Based Ligand

Lewis acidic boron compounds are ubiquitous in chemistry due to their numerous applications, yet tuning and optimizing their properties towards different purposes is still a challenging field of research. In this work, the boron-based Lewis acid B[OTeF3(C6F5)2]3 was synthesized by reaction of the teflate derivative HOTeF3(C6F5)2 with BCl3 or BCl3 ⋅ SMe2. This new compound presents a remarkably high thermal stability up to 300 °C, as well as one of the most sterically encumbered boron centres known in the literature. Theoretical and experimental methods revealed that B[OTeF3(C6F5)2]3 exhibits a comparable Lewis acidity to that of the well-known B(C6F5)3. The affinity of B[OTeF3(C6F5)2]3 towards pyridine was accessed by Isothermal Titration Calorimetry (ITC) and compared to that of B(OTeF5)3 and B(C6F5)3. The ligand-transfer reactivity of this new boron compound towards different fluorides was demonstrated by the formation of an anionic Au(III) complex and a hypervalent iodine(III) species.

Homogeneous and Heterogeneous Frustrated Lewis Pairs for the Activation and Transformation of CO2

Due to the serious ecological problems caused by the high CO2 content in the atmosphere, reducing atmospheric CO2 has attracted widespread attention from academia and governments. Among the many ways to mitigate CO2 concentration, the capture and comprehensive utilization of CO2 through chemical methods have obvious advantages, whose key is to develop suitable adsorbents and catalysts. Frustrated Lewis pairs (FLPs) are known to bind CO2 through the interaction between unquenched Lewis acid sites/Lewis base sites with the O/C of CO2, simultaneously achieving CO2 capture and activation, which render FLP better potential for CO2 utilization. However, how to construct efficient FLP targeted for CO2 utilization and the mechanism of CO2 activation have not been systematically reported. This review firstly provides a comprehensive summary of the recent advances in the field of CO2 capture, activation, and transformation with the help of FLP, including the construction of homogeneous and heterogeneous FLPs, their interaction with CO2, reaction activity, and mechanism study. We also illustrated the challenges and opportunities faced in this field to shed light on the prospective research.

An electrochemically responsive B-O dynamic bond to switch photoluminescence of boron-nitrogen-doped polyaromatics

Boron-doped polycyclic aromatic hydrocarbons exhibit excellent optical properties, and regulating their photophysical processes is a powerful strategy to understand the luminescence mechanism and develop new materials and applications. Herein, an electrochemically responsive B-O dynamic coordination bond is proposed, and used to regulate the photophysical processes of boron-nitrogen-doped polyaromatic hydrocarbons. The formation of the B-O coordination bond under a suitable voltage is confirmed by experiments and theoretical calculations, and B-O coordination bond can be broken back to the initial state under opposite voltage. The whole process is accompanied by reversible changes in photophysical properties. Further, electrofluorochromic devices are successfully prepared based on the above electrochemically responsive coordination bond. The success and harvest of this exploration are beneficial to understand the luminescence mechanism of boron-nitrogen-doped polyaromatic hydrocarbons, and provide ideas for design of dynamic covalent bonds and broaden material types and applications.

Dinitrogen Activation within Frustrated Lewis Pairs Is Promoted by Adding External Electric Fields

This study uses computational means to explore the feasibility of N2 cleavage by frustrated Lewis pair (FLPs) species. The employed FLP systems are phosphane/borane (1) and carbene/borane (2). Previous studies show that 1 and 2 react with H2 and CO2 but do not activate N2. The present study demonstrates that N2 is indeed inert, and its activation requires augmentation of the FLPs by an external tool. As we demonstrate here, FLP-mediated N2 activation can be achieved by an external electric field oriented along the reaction axis of the FLP. Additionally, the study demonstrates that FLP -N2 activation generates useful nitrogen compound, e.g., hydrazine (H2N-NH2). In summary, we conclude that FLP effectively activates N2 in tandem with oriented external electric fields (OEEFs), which play a crucial role. This FLP/OEEF combination may serve as a general activator of inert molecules.

Engineering Frustrated Lewis Pair Active Sites in Porous Organic Scaffolds for Catalytic CO2 Hydrogenation

Frustrated Lewis pairs (FLPs), featuring reactive combinations of Lewis acids and Lewis bases, have been utilized for myriad metal-free homogeneous catalytic processes. Immobilizing the active Lewis sites to a solid support, especially to porous scaffolds, has shown great potential to ameliorate FLP catalysis by circumventing some of its inherent drawbacks, such as poor product separation and catalyst recyclability. Nevertheless, designing immobilized Lewis pair active sites (LPASs) is challenging due to the requirement of placing the donor and acceptor centers in appropriate geometric arrangements while maintaining the necessary chemical environment to perform catalysis, and clear design rules have not yet been established. In this work, we formulate simple guidelines to build highly active LPASs for direct catalytic hydrogenation of CO2 through a large-scale screening of a diverse library of 25,000 immobilized FLPs. The library is built by introducing boron-containing acidic sites in the vicinity of the existing basic nitrogen sites of the organic linkers of metal-organic frameworks collected in a "top-down" fashion from the CoRE MOF 2019 database. The chemical and geometrical appropriateness of these LPASs for CO2 hydrogenation is determined by evaluating a series of simple descriptors representing the intrinsic strength (acidity and basicity) of the components and their spatial arrangement in the active sites. Analysis of the leading candidates enables the formulation of pragmatic and experimentally relevant design principles which constitute the starting point for further exploration of FLP-based catalysts for the reduction of CO2.

Understanding the CO capture reaction through electronic structure analysis of four-membered-ring group-13/N- and B/group-15-based Lewis acid-base pairs

Incomplete combustion yields a significant byproduct, known for its high toxicity to humans: gas phase carbon monoxide (CO). This study utilized several advanced theoretical methods to examine the factors contributing to the activation energy involved in CO capture by a frustrated Lewis pair (FLP) and to forecast the potential success of the CO capture reaction. The current theoretical findings indicate that among the four-membered-ring Group-13/N-FLP and B/Group-15-FLP molecules, only the B/N-based FLP-type molecule effectively captures CO, considering both thermodynamics and kinetics. According to the results obtained through energy decomposition analysis-natural orbitals for chemical valence (EDA-NOCV), it can be concluded that the donor-acceptor (singlet-singlet) model, rather than the electron-sharing (triplet-triplet) model, effectively characterizes the electronic structures in the CO trapping reaction involving four-membered-ring G13/G15-FLPs. Theoretical findings, derived from EDA-NOCV and frontier molecular orbital theory, demonstrate that the CO capture reaction by G13/G15-FLP involves two distinct bonding interactions. The first interaction is characterized by FLP-to-CO forward bonding, with the lone pair of G15 (G13/G15-FLP) donating to the empty p-π* orbital of carbon (CO), which predominates. The second interaction involves CO-to-FLP backward bonding, where the empty σ* orbital of G13 (G13/G15-FLP) accepts the lone pair of carbon (CO), albeit to a lesser extent. In summary, our theoretical findings indicate that the G13-C and G15-C bonds in the G15/G15-TS species with a four-membered ring can be classified as two dative single bonds. The importance of the interaction between Lewis bases and CO surpasses that of the interaction between Lewis acids and CO. Theoretical evidences in this study demonstrate a linear connection between the G13-G15 bond length within the four-membered-ring G13/G15-FLP and the activation barrier linked to CO capture. The activation strain model analysis in this study suggests that the activation energy required for bond formation primarily depends on the geometric deformation energy of G13/G15-FLP in capturing CO. Our DFT investigation shows that Hammond's postulate is obeyed by the CO catching reaction of the four-membered-ring G13/N-FLP, meaning that an earlier transition state is associated with a lower activation barrier, but not with the CO catching reaction of the four-membered-ring B/G15-FLP.

Reactivity of surface oxygen vacancy sites and frustrated Lewis acid-base pairs of In2O3 catalysts in CO2 hydrogenation

The effects of oxygen vacancy (VO) formation energy and surface frustrated Lewis acid-base pairs (SFLPs) on the CO2 hydrogenation activity of In2O3 catalysts were studied using density functional theory calculations. The VO formation energy of 2.8-3.3 eV was found to favor HCOO formation, whereas the presence of SFLPs is conducive to CO formation.

Frustrated Lewis pair-mediated hydro-dehalogenation: crucial role of non-covalent interactions

CONTEXT

Organic halides stand as invaluable reagents with diverse applications in synthetic chemistry and various industrial processes. Despite their utility, concerns arise due to their inherent toxicity. Addressing these apprehensions, hydro-dehalogenation has emerged as a promising strategy involving the replacement of halogen atoms with hydrogen atoms to transform toxic organic halides into hydrocarbons. This study delves into the computational exploration of hydro-dehalogenation reactions of benzyl halide, mediated by frustrated Lewis pairs (FLPs), using density functional theory (DFT). The reactions entail the formation of FLP1 or FLP2 in the presence of TMP or lutidine with B(C6F5)3, respectively. This is followed by heterolytic cleavage of dihydrogen and subsequent reaction with benzyl halides. Non-covalent interaction analysis underscores the significance of π-π stacking and CH-π interactions in stabilizing transition states. Additionally, the activation strain model (ASM) dissects activation energies, revealing the substantial impact of strain energy on reaction barriers. Energy decomposition analysis (EDA) offers insights into the contributions of electrostatic, orbital, and dispersion energies to the overall attractive interaction energy. The investigation extends to hydro-dehalogenation reactions of ethyl halides, uncovering distinct mechanisms and activation barriers. This comprehensive analysis illuminates the intricacies of hydro-dehalogenation reactions, providing valuable insights into their mechanisms and paving the way for future studies in this field.

METHODS

Geometry optimizations were carried out at the M06-2X/def2-SVP level of theory, which was performed using the Gaussian 16 program. Solvent-corrected single-point energies were also calculated using the polarizable continuum model (PCM) at the PCM(chloroform)-M06-2X/def2-TZVP//M06-2X/def2-SVP level of theory. The Gibbs free energy correction was determined from computations performed at the M06-2X/def2-SVP level of theory. Principal interacting orbital (PIO) analysis was conducted using the NBO 6.0 software. The nature of bonding in the respective transition state (TS) structures was analyzed using atoms-in-molecules (AIM) analyses. Additionally, the presence of non-covalent interactions (NCI) was exemplified using Multiwfn software.

Mechanism of Alkaline Earth Metal Amide Catalyzed Hydrogenation of Challenging Alkenes and Arenes

Recently, bulky alkaline earth (Ae=Mg, Ca, Sr, Ba) metal amide complexes AeN"2 (N"=N[Si(iPr)3]2) are shown to be active for catalyzing the hydrogenation of unactivated alkenes and arenes, presumably via the monomer N"AeH as catalyst. In sharp contrast, our extensive DFT calculations disclose that the double Ae-H-Ae bridged dimer (N"AeH)2 is kinetically more favorable in catalytic hydrogenation with H2, although rate-limited by the initial hydrogenolysis of AeN"2 to form the monomer N"AeH.

Frustrated Lewis Pair-Type Reactivity of Intermolecular Rare-Earth Aryloxide and N-Heterocyclic Carbene/Olefin Combinations

This work reports the cooperative reactivity of rare-earth aryloxide complexes with N-heterocyclic carbene (NHC) or N-heterocyclic olefin (NHO), showcasing their synergistic effect on the activation of H2 and diverse organic substrates. Reactions of RE(OAr)3 (RE=La, Sm, and Y; Ar=2,6-tBu2-C6H3) with unsaturated NHC ItBu (:C[N(R)CH]2, R=tBu) isolated abnormally bound RE metal NHC complexes RE/aNHC. In contrast, no metal-NHO adducts were formed when RE(OAr)3 were treated with NHO (R2C=C[N(R)C(R)]2, R=CH3). Both RE/aNHC and RE/NHO Lewis pairs enabled cooperative H2 activation. Furthermore, RE(OAr)3 were found to catalyze the hydrogenation of the exocyclic C=C double bond of NHO under mild conditions. Moreover, treatment of the La/aNHC complex with benzaldehyde produced a La/C4 1,2-addition product. The La/NHO Lewis pair could react with (trimethylsilyl)diazomethane and α, β-conjugated imine, affording an isocyanotrimethylsilyl lanthanum amide complex and a La/C 1,4-addition product, respectively.

The p-block challenge: assessing quantum chemistry methods for inorganic heterocycle dimerizations

The elements of the p-block of the periodic table are of high interest in various chemical and technical applications like frustrated Lewis-pairs (FLP) or opto-electronics. However, high-quality benchmark data to assess approximate density functional theory (DFT) for their theoretical description are sparse. In this work, we present a benchmark set of 604 dimerization energies of 302 "inorganic benzenes" composed of all non-carbon p-block elements of main groups III to VI up to polonium. This so-called IHD302 test set comprises two classes of structures formed by covalent bonding and by weaker donor-acceptor (WDA) interactions, respectively. Generating reliable reference data with ab initio methods is challenging due to large electron correlation contributions, core-valence correlation effects, and especially the slow basis set convergence. To compute reference values for these dimerization reactions, after thorough testing, we applied a computational protocol using state-of-the-art explicitly correlated local coupled cluster theory termed PNO-LCCSD(T)-F12/cc-VTZ-PP-F12(corr.). It includes a basis set correction at the PNO-LMP2-F12/aug-cc-pwCVTZ level. Based on these reference data, we assess 26 DFT methods in combination with three different dispersion corrections and the def2-QZVPP basis set, five composite DFT approaches, and five semi-empirical quantum mechanical methods. For the covalent dimerizations, the r2SCAN-D4 meta-GGA, the r2SCAN0-D4 and ωB97M-V hybrids, and the revDSD-PBEP86-D4 double-hybrid functional are found to be the best-performing methods among the evaluated functionals of the respective class. However, since def2 basis sets for the 4th period are not associated to relativistic pseudo-potentials, we obtained significant errors in the covalent dimerization energies (up to 6 kcal mol-1) for molecules containing p-block elements of the 4th period. Significant improvements were achieved for systems containing 4th row elements by using ECP10MDF pseudopotentials along with re-contracted aug-cc-pVQZ-PP-KS basis sets introduced in this work with the contraction coefficients taken from atomic DFT (PBE0) calculations. Overall, the IHD302 set represents a challenge to contemporary quantum chemical methods. This is due to a large number of spatially close p-element bonds which are underrepresented in other benchmark sets, and the partial covalent bonding character for the WDA interactions. The IHD302 set may be helpful to develop more robust and transferable approximate quantum chemical methods in the future.

Unveiling the Function of Oxygen Vacancy on Facet-Dependent CeO2 for the Catalytic Destruction of Monochloromethane: Guidance for Industrial Catalyst Design

Secondary pollution remains a critical challenge for the catalytic destruction of chlorinated volatile organic compounds (CVOCs). By employing experimental studies and theoretical calculations, we provide valuable insights into the catalytic behaviors exhibited by ceria rods, cubes, and octahedra for monochloromethane (MCM) destruction, shedding light on the elementary reactions over facet-dependent CeO2. Our findings demonstrate that CeO2 nanorods with the (110) facet exhibit the best performance in MCM destruction, and the role of vacancies is mainly to form a longer distance (4.63 Å) of frustrated Lewis pairs (FLPs) compared to the stoichiometric surface, thereby enhancing the activation of MCM molecules. Subsequent molecular orbital analysis showed that the adsorption of MCM mainly transferred electrons from the 3σ and 4π* orbitals to the Ce 4f orbitals, and the activation was mainly caused by weakening of the 3σ bonding orbitals. Furthermore, isotopic experiments and theoretical calculations demonstrated that the hydrogen chloride generated is mainly derived from methyl in MCM rather than from water, and the primary function of water is to form excess saturated H on the surface, facilitating the desorption of generated hydrogen chloride.

In-silico-assisted derivatization of triarylboranes for the catalytic reductive functionalization of aniline-derived amino acids and peptides with H2

Cheminformatics-based machine learning (ML) has been employed to determine optimal reaction conditions, including catalyst structures, in the field of synthetic chemistry. However, such ML-focused strategies have remained largely unexplored in the context of catalytic molecular transformations using Lewis-acidic main-group elements, probably due to the absence of a candidate library and effective guidelines (parameters) for the prediction of the activity of main-group elements. Here, the construction of a triarylborane library and its application to an ML-assisted approach for the catalytic reductive alkylation of aniline-derived amino acids and C-terminal-protected peptides with aldehydes and H2 is reported. A combined theoretical and experimental approach identified the optimal borane, i.e., B(2,3,5,6-Cl4-C6H)(2,6-F2-3,5-(CF3)2-C6H)2, which exhibits remarkable functional-group compatibility toward aniline derivatives in the presence of 4-methyltetrahydropyran. The present catalytic system generates H2O as the sole byproduct.

Advances in Catalysts for Urea Electrosynthesis Utilizing CO2 and Nitrogenous Materials: A Mechanistic Perspective

Electrocatalytic urea synthesis from CO2 and nitrogenous substances represents an essential advance for the chemical industry, enabling the efficient utilization of resources and promoting sustainable development. However, the development of electrocatalytic urea synthesis has been severely limited by weak chemisorption, poor activation and difficulties in C-N coupling reactions. In this review, catalysts and corresponding reaction mechanisms in the emerging fields of bimetallic catalysts, MXenes, frustrated Lewis acid-base pairs and heterostructures are summarized in terms of the two central mechanisms of molecule-catalyst interactions as well as chemical bond cleavage and directional coupling, which provide new perspectives for improving the efficiency of electrocatalytic synthesis of urea. This review provides valuable insights to elucidate potential electrocatalytic mechanisms.

Precise Distance Control and Functionality Adjustment of Frustrated Lewis Pairs in Metal-Organic Frameworks

We report the construction of frustrated Lewis pairs (FLPs) in a metal-organic framework (MOF), where both Lewis acid (LA) and Lewis base (LB) are fixed to the backbone. The anchoring of a tritopic organoboron linker as LA and a monotopic linker as LB to separate metal oxide clusters in a tetrahedron geometry allows for the precise control of distance between them. As the type of monotopic LB linker varies, pyridine, phenol, aniline, and benzyl alcohol, a series of 11 FLPs were constructed to give fixed distances of 7.1, 5.5, 5.4, and 4.8 Å, respectively, revealed by 11B-1H solid-state nuclear magnetic resonance spectroscopy. Keeping LA and LB apart by a fixed distance makes it possible to investigate the electrostatic effect by changing the functional groups in the monotopic LB linker, while the LA counterpart remains unaffected. This approach offers new chemical environments of the active site for FLP-induced catalysis.

Asymmetric catalysis by chiral FLPs: A computational mini-review

Steric hindrance in Lewis acid (LA) and Lewis base (LB) obstruct the Lewis acid-base adduct formation, and the pair was termed as frustrated Lewis pair (FLP). In the past 16 years, the field of enantioselective catalysis by chiral FLPs has been slowly growing. It was shown that chiral LAs are significant as they are involved in the hydrogen transfer (HT) step to the imine, resulting in enantioselectivity. After H2 activation, the borohydride can exist in a number of plausible conformations and their stability is governed by the presence of noncovalent interaction through C-H····π and π····π interactions. However, LBs are not ideal for asymmetric induction as they compete with the imine substrate as a counter LB. Further, the proton transfer from chiral LB to the imine does not induce any chirality as chirality develops in the HT step. However, intramolecular FLPs with chiral scaffold are very efficient as they possess an optimum distance between LA and LB, which facilitates the H2 activation but precludes the adduct formation of the small molecules substrate with the LA component. This mini-review summarizes computational investigation involving chiral LA and LB, and discusses intramolecular FLPs in the enantioselective catalysis.

Molecular-Scale Visualization of Steric Effects of Ligand Binding to Reconstructed Au(111) Surfaces

Direct imaging of single molecules at nanostructured interfaces is a grand challenge with potential to enable new, precise material architectures and technologies. Of particular interest are the structural morphology and spectroscopic signatures of the adsorbed molecule, where modern probes are only now being developed with the necessary spatial and energetic resolution to provide detailed information at the molecule-surface interface. Here, we directly characterize the adsorption of individual m-terphenyl isocyanide ligands on a reconstructed Au(111) surface through scanning tunneling microscopy and inelastic electron tunneling spectroscopy. The site-dependent steric pressure of the various surface features alters the vibrational fingerprints of the m-terphenyl isocyanides, which are characterized with single-molecule precision through joint experimental and theoretical approaches. This study provides molecular-level insights into the steric-pressure-enabled surface binding selectivity as well as its effect on the chemical properties of individual surface-binding ligands.

Pendulum-like hemilability in a Ti-based frustrated Lewis Trio

We describe the first experimental example of a theoretically predicted Frustrated Lewis Trio (FLT). A tetradentate PNNP ligand is used to stabilise a highly electrophilic [TiCl3]+ fragment in a way that results in two equally long and frustrated Ti-P bonds. A combined experimental and computational approach revealed a distinct role of each Lewis basic phosphine in the heterolytic activation of chemical bonds. This dual functionality is characterised by a pendulum-like hemilability, where one of the phosphines acts as a nucleophile while the other serves as a hemilabile ligand that dynamically tunes the Ti-P distance as a function of the required electron density at the Ti centre.