Recent progress in SERS monitoring of photocatalytic reactions

Surface-enhanced Raman spectroscopy (SERS) is a powerful analytical technique renowned for its ultra-high sensitivity. Extensive research in SERS has led to the development of a wide range of SERS substrates, including plasmonic metals, semiconductors, metal organic frameworks, and their assemblies. Some of these materials are also excellent photocatalysts, and by taking advantage of their bifunctional characteristics, the photocatalytic processes that occur on their surface can be monitored in situ via SERS. This provides us with unique opportunities to gain valuable insights into the intricate details of the photocatalytic processes that are challenging to access using other techniques. In this review, we highlight key development in in situ and/or real-time SERS-tracking of photocatalytic reactions. We begin by providing a brief account of recent developments in SERS substrates, followed by discussions on how SERS can be used to elucidate crucial aspects of photocatalytic processes, including: (1) the influence of the surrounding media on charge carrier extraction; (2) the direction of charge carrier transfer; (3) the pathway of photocatalytic activation; and (4) differentiation between the effects of photo-thermal and energetic electrons. Additionally, we discuss the benefits of tip-enhanced Raman spectroscopy (TERS) due to the ability to achieve high-spatial-resolution measurements. Finally, we address major challenges and propose potential directions for the future of SERS monitoring of photocatalytic reactions. By leveraging the capabilities of SERS, we can uncover new insights into photocatalytic processes, paving the way for advancements in sustainable energy and environmental remediation.

Heteropolyacids: An Ultrasensitive Ionic Volume-Enhanced Raman Scattering Platform

Surface-enhanced Raman scattering (SERS) is regarded as the most direct and powerful tool to identify chemical fingerprints. However, current SERS substrate materials still face some critical challenges, including low molecular utilization efficiency and low selectivity. Herein, a novel oxygen vacancy heteropolyacid─H₁₀Fe₃Mo₂₁O₅₁ (HFMO)─is developed as a high-performance volume-enhanced Raman scattering (VERS)-active platform. Due to its merit of water solubility, HFMO forms a special coordination bond with the probe molecule at the molecular level, which allows its enhancing ability to be comparable to that of noble metals. An enhancement factor of 1.26 × 10⁹ and a very low detection limit of 10^-13 M for rhodamine 6G were obtained. A robust O-N coordination bond was formed between the anion of HFMO and the probe molecule, resulting in a special electron transfer path (Mo-O-N) with high selectivity, which is verified using X-ray photoelectron spectroscopy analysis and density functional theory calculations. That is to say, the proposed HFMO platform has excellent VERS enhancing effect, specifically for the molecules containing the imino group (e.g., methyl blue, detection limit: 10^-11 M), offering the merits of high reproducibility and uniformity, high-temperature resistance, long-time laser irradiation, and strong acid resistance. Such an initial effort on the ionic type VERS platform may enable the further development of highly sensitive, highly selective, and water-soluble VERS technology.

An adhesive SERS substrate based on a stretched silver nanowire-tape for the in situ multicomponent analysis of pesticide residues

Two essential factors in powerful surface-enhanced Raman spectroscopy analysis of trace pesticide residues are viz., high sensitivity and efficient sampling. Herein, owing to elastic properties, a stretched Ag nanowire (Ag NW)-tape under the strain of 15% formed a wrinkled structure with periodic microridges and microgrooves, where abundant nanogaps were generated by the aggregated Ag NWs. Compared with the unstretched Ag NW-tape substrate, an appreciable signal enhancement of the modified 4-mercaptobenzoic acid (4-MBA) molecules with a ratio of 2.6 was discerned from the sophisticated SERS substrate due to the electromagnetic enhancement induced by the relatively high density of "hot spots" around the Ag NW aggregates. The as-fabricated Ag NW-tape substrate performed admirably in detecting 4-MBA and demonstrated an enhancement factor of 1.16 × 10⁶. Moreover, for the in situ detection of tetramethylthiuram disulfide, thiabendazole, and their mixture, the relatively high recovery rates of over 88% were favorably realized by the Ag NW-tape substrate with superior sensitivity, distinct flexibility, and adhesiveness. This fascinating SERS substrate, dependent on the flexible and adhesive Ag NW-tape, is promising for application in SERS analysis of trace residues on various practical surfaces.

Toward a New Era of SERS and TERS at the Nanometer Scale: From Fundamentals to Innovative Applications

Surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS) have opened a variety of exciting research fields. However, although a vast number of applications have been proposed since the two techniques were first reported, none has been applied to real practical use. This calls for an update in the recent fundamental and application studies of SERS and TERS. Thus, the goals and scope of this review are to report new directions and perspectives of SERS and TERS, mainly from the viewpoint of combining their mechanism and application studies. Regarding the recent progress in SERS and TERS, this review discusses four main topics: (1) nanometer to subnanometer plasmonic hotspots for SERS; (2) Ångström resolved TERS; (3) chemical mechanisms, i.e., charge-transfer mechanism of SERS and semiconductor-enhanced Raman scattering; and (4) the creation of a strong bridge between the mechanism studies and applications.

Metal-Organic Frameworks-Based Optical Nanosensors for Analytical and Bioanalytical Applications

Metal-organic frameworks (MOFs)-based optical nanoprobes for luminescence and surface-enhanced Raman spectroscopy (SERS) applications have been receiving tremendous attention. Every element in the MOF structure, including the metal nodes, the organic linkers, and the guest molecules, can be used as a source to build single/multi-emission signals for the intended analytical purposes. For SERS applications, the MOF can not only be used directly as a SERS substrate, but can also improve the stability and reproducibility of the metal-based substrates. Additionally, the porosity and large specific surface area give MOF a sieving effect and target molecule enrichment ability, both of which are helpful for improving detection selectivity and sensitivity. This mini-review summarizes the advances of MOF-based optical detection methods, including luminescence and SERS, and also provides perspectives on future efforts.

Recent advances in non-plasmonic surface-enhanced Raman spectroscopy nanostructures for biomedical applications

Surface-enhanced Raman spectroscopy (SERS) is an emerging powerful vibrational technique offering unprecedented opportunities in biomedical science for the sensitive detection of biomarkers and the imaging and tracking of biological samples. Conventional SERS detection is based on the use of plasmonic substrates (e.g., Au and Ag nanostructures), which exhibit very high enhancement factors (EF = 1010 -1011 ) but suffers from serious limitations, including light-induced local heating effect due to ohmic loss and expensive price. These drawbacks may limit detection accuracy and large-scaled practical applications. In this review, we focus on alternative approaches based on plasmon-free SERS detection on low-cost nanostructures, such as carbons, oxides, chalcogenides, polymers, silicons, and so forth. The mechanism of non-plasmonic SERS detection has been attributed to interfacial charge transfer between the substrate and the adsorbed molecules, with no photothermal side-effects but usually less EF compared with plasmonic nanostructures. The strategies to improve Raman signal detection, through the tailoring of substrate composition, structure, and surface chemistry, is reviewed and discussed. The biomedical applications, for example, SERS cell characterization, biosensing, and bioimaging are also presented, highlighting the importance of substrate surface functionalization to achieve sensitive, accurate analysis, and excellent biocompatibility. This article is categorized under: Diagnostic Tools > Diagnostic Nanodevices Diagnostic Tools > Biosensing Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Moving MoO2/C Nanospheres with the Functions of Enrichment and Sensing for Online-High-Throughput SERS Detection

The development of online surface-enhanced Raman spectroscopy (SERS) detection methods is crucial to achieving high-throughput efficiency. Herein, a non-noble-metal moving substrate that integrates the functions of enrichment and sensing is developed for the microfluidic online-high-throughput detection of pollutants. The lowest limit of detection of 1 × 10^-12 M and a Raman enhancement factor of 6.3 × 10⁸ are obtained on the nanospheres. In a single detection channel, the analysis of 20 samples is achieved within 5 min, and the relative standard deviation of the signals is less than 6.8%. Compared with static SERS detection of fixed substrates, this dynamic SERS detection method greatly reduces the contamination memory effect of the analyte residue, enabling it to perform the sequential quantitative detection of samples with large concentration differences. Moreover, the current online SERS platform realizes the rapid quantitative detection of multicomponent samples.

Current methods and emerging approaches for detection of programmed death ligand 1

Various tumor cells overexpress programmed death ligand 1 (PD-L1), a main immune checkpoint protein (ICP) embedded in the tumor cells membrane, to evade immune recognition through the interaction between PD-L1 and its receptor programmed death 1 (PD-1) which is from T-cells for maintaining immune tolerance. So inhibitors targeting the PD-1 or PD-L1 can block the PD-1/PD-L1 signaling pathway to restore the recognition activity of the immune system to tumor cells, which also have been utilized as a novel approach to improve the clinical therapeutic effect for cancer patients. Since not all cancer patients can respond to these inhibitors effectively, previous diagnosis of PD-L1 is significant to target the right treatments for cancer patients. This review pays attention to the PD-L1 detection and recent progress in the measurement of PD-L1 concentration, including various detection methods based on optical sensors as well as electrochemical assays. Apart from above those, we also focus on the prospects of PD-L1 detection in precision medicine.

Plasmonic Rare-Earth Nanosheets as Surface Enhanced Raman Scattering Substrates with High Sensitivity and Stability for Multicomponent Analysis

Looking for high-performance substrates is an important goal of current surface enhanced Raman scattering (SERS) research. Herein, ultrathin multilayer rhenium (Re) nanosheets as a rare-earth metal substrate are found to have extraordinary SERS performance. These Re nanosheets are prepared through a convenient low-temperature molten salt strategy, and their total thickness is ∼5 nm, including 3-4 layers of ultrathin nanosheets with a thickness of only ∼1 nm. The viscosity of molten salt plays a key role in the formation of these ultrathin layered nanosheets. These nanosheets exhibit a strong and well-defined localized surface plasmon resonance (SPR) effect in the visible light region. The plasmonic Re nanosheets show excellent SERS performance with high sensitivity, chemical stability, and signal repeatability. The lowest detection limit for toxic compounds is 10^-12 mol, and the corresponding Raman enhancement factor is 9.1 × 10⁸. A composite enhancement mechanism caused by localized-SPR and charge transport has played an important role in the rare-earth-SERS. High-throughput multiassay analysis is performed on the flexible membrane assembled from the Re nanosheets, which highlights that our system is capable of rapid separation and identification of the samples containing various analytes.

Ultrasensitive Sensing of Volatile Organic Compounds Using a Cu-Doped SnO2 -NiO p-n Heterostructure That Shows Significant Raman Enhancement*

Surface enhanced Raman scattering (SERS) based on chemical mechanism (CM) attracts tremendous attention for great selectivity and stability. However, low enhancement factor (EF) limits its practical applications for trace detection. Here, a novel sponge-like Cu-doping SnO₂ -NiO p-n semiconductor heterostructure (SnO₂ -NiO_x /Cu), was first created as a CM-based SERS substrate with a significant EF of 1.46×10¹⁰ . This remarkable EF was mainly attributed to the enhanced charge-separation efficacy of p-n heterojunction and charge transfer resonance resulted from Cu doping. Moreover, the porous structure enriched the probe molecules, resulting in further SERS signals magnification. By immobilizing CuPc as an inner-reference element, SnO₂ -NiO_x /Cu was developed as a SERS nose for selective recognition of multiple lung cancer related VOCs down to ppb level. The information of VOCs was recorded in a barcode, demonstrating practical potential of a desktop SERS device for biomarker screening.

Nitrogen-Doped Titanium Monoxide Flexible Membrane for a Low-Cost, Biocompatible, and Durable Raman Scattering Substrate

The development of low-cost, biocompatible, and durable high-performance substrates is an urgent issue in the field of surface-enhanced Raman scattering (SERS). Herein, by reducing and exfoliating the TiO₂-layered nanoplates in the gas phase, nitrogen-doped titanium monoxide (N-TiO) ultrathin nanosheets composed of 2-3 single layers with a thickness of only ∼1.2 nm are synthesized. Compared with pure TiO, the oxidation resistance of N-TiO is greatly improved, in which the oxidation threshold is significantly increased from 187.5 to 415.6 °C. The N-TiO ultrathin nanosheets are found to have strong surface plasmon resonance in the visible region. These ultrathin N-TiO nanosheets can be easily assembled into a large-scale flexible membrane and exhibit remarkable SERS effects. Moreover, this low-cost flexible SERS substrate combines the high durability of noble-metal substrates and the high biocompatibility of semiconductor substrates.

δ-MoN Yolk Microspheres with Ultrathin Nanosheets for a Wide-Spectrum, Sensitive, and Durable Surface-Enhanced Raman Scattering Substrate

Facing the complex environment of on-site detection, the development of active substrates with wide-spectrum surface-enhanced Raman scattering (SERS) activity is essential. Herein, we report on the low temperature and reproducible synthesis of plasmonic δ-MoN yolk microspheres by in situ-nitriding amorphous MoO₂ microspheres at 500 °C and 1 atm. The yolk-structured δ-MoN exhibits strong and wide-spectrum surface plasmon resonance and SERS effects and can perform highly selective detection for probes with different absorption wavelengths under excitation of 532, 633, and 785 nm lasers, with a limitation of 10^-11 M and an enhanced factor of 3.6 × 10⁷. Moreover, the plasmonic δ-MoN yolk microspheres have high environmental durability, which can maintain high sensitivity in strong acid and alkaline solutions.

Unidirectional/Bidirectional Electron Transfer at the Au/TiO2 Interface Operando Tracked by SERS Spectra from Au and TiO2

Although it is well-known that the size can influence the surface plasmon resonance property of coinage metals and the electronic state of the Mott-Schottky junction formed at the metal/semiconductor interface, insights into how the size can be exploited to optimize the photocatalytic activity and selectivity of metal/semiconductor composites are lacking. Here we utilize operando SERS spectroscopy to identify the size effect on the electron-transfer dynamics and the direction at the Au/TiO₂ interface. This effect was characterized by the photocatalytic reduction sites of p-nitrothiophenol, which were self-tracked with the SERS spectra from Au nanoparticle and inverse-opal structured TiO₂, respectively. The size-dependent unidirectional/bidirectional transfer of photoinduced electrons at the Au/TiO₂ interface was revealed by operando SERS spectroscopy, which enables the rational tuning of the reduction selectivity.

Understanding the Role of Metal-Organic Frameworks in Surface-Enhanced Raman Scattering Application

Metal-organic frameworks (MOFs), built from organic linkers and metal ions/clusters, have emerged as highly promising materials for wide applications. Combining highly porous crystalline MOFs with the surface-enhanced Raman scattering (SERS) technique can achieve unprecedented advantages of high selectivity, high sensitivity, and expedience in analysis and detection. In this critical review, the aim is to present a comprehensive review of recent advances in understanding of the roles of MOFs in MOF-SERS systems, particularly their structure-to-property correlation. Key examples are selected from representative literature to illustrate critical concepts and the MOF-based property-dependent applications are particularly emphasized. Finally, the barriers, future trends, and prospects for further advances in MOF-SERS platforms are also discussed.

Novel broad-spectrum-driven oxygen-linked band and porous defect co-modified orange carbon nitride for photodegradation of Bisphenol A and 2-Mercaptobenzothiazole

Here, we successfully synthesized the oxygen-linked band and porous defect co-modified orange carbon nitride (AF-C₃N₄) using a simple method. Further, the band structure calculation of its simulated structure is performed by DFT, which shows that the introduction of oxygen-linked band can adjust its band structure. The photocatalytic degradation rates of 0.3AF-C₃N₄ for bisphenol A and 2-mercaptobenzothiazole were 8 times and 2.73 times that of the original g-C₃N₄, respectively. Moreover, 0.3AF-C₃N₄ also shows photocatalytic activity under different wavelength light (blue, green and red light), which indicates that the synthesized materials have a broad spectrum of photocatalytic activity. Further, we proposed a possible photocatalytic degradation pathway by HPLC-MS analysis. Free radical quenching test and ESR spectra show that the generated superoxide radicals (•O₂^-), hydroxyl radicals (•OH) and holes (h⁺) cause photodegradation, while enhancing singlet oxygen (¹O₂) and weaken the content of hydrogen peroxide has further proved that active oxygen groups play an important role in the photocatalytic degradation process. Additionally, the 0.3AF-C₃N₄ can also be a photoelectrochemical sensor to detect the concentration of bisphenol A (λ ≥ 550 nm). This study provides a new strategy for the synthesis of orange carbon nitride by oxygen-linked band and porous defect co-modification for photocatalytic applications.

Low temperature synthesis of plasmonic molybdenum nitride nanosheets for surface enhanced Raman scattering

Molybdenum nitride (δ–MoN) is an important functional material due to its impressive catalytic, energy storage, and superconducting properties. However, the synthesis of δ–MoN usually requires extremely harsh conditions; thus, the insight into δ−MoN is far behind that of oxides and sulfides of molybdenum. Herein, we report that ultrathin δ−MoN nanosheets are prepared at 270 °C and 12 atm. WN, VN, and TiN nanosheets are also synthesized by this method. The δ−MoN nanosheets show strong surface plasmon resonance, high conductivity, excellent thermal and chemical stability as well as a high photothermal conversion efficiency of 61.1%. As a promising surface enhanced Raman scattering substrate, the δ−MoN nanosheets exhibit a 8.16 × 10⁶ enhanced factor and a 10⁻¹⁰ level detection limit for polychlorophenol.

Molybdenum nitride is promising for catalysis, energy storage and Raman scattering, but it is synthesized under harsh conditions. Here the authors synthesize highly crystalline molybdenum nitride nanosheets using a relatively mild, non-aqueous solvothermal approach that can be extended to other nitrides.

Surface-Enhanced Raman Scattering of Phenols and Catechols by a Molecular Analogue of Titanium Dioxide

Surface-enhanced Raman spectroscopy (SERS) of semiconducting TiO₂ was used for studying binding modes and surface reactions of molecules bound at the interface but is generally limited by low signal intensity and lack of authentic structural information. Here, we report a representative titanium-oxide cluster (TOC), i.e., Ti₁₇O₂₄(OⁱC₃H₇)₂₀ (Ti₁₇), combines the benefits from both precise structures and intense SERS signals by providing a titania surface. According to the single-crystal X-ray diffraction analysis, phenols and catechols are vertically attached via σ-bonds to the certain sites of Ti₁₇. Ti₁₇ brings about much more intense Raman signals than the reference TiO₂ NPs, leading to 10^-5-10^-6 M analyte detection (enhancement factors are 10³-10⁵). The contributions of focusing effect, CHEM effect and resonance mechanism, all of which are found responsible for the higher SERS activity of Ti₁₇ than the reference TiO₂ NPs, in the SERS by Ti₁₇ are quantitatively analyzed. This study suggests SERS by TOCs may be promising for detection purposes and structural studies of environmentally and catalytically relevant molecules with fewer assumptions regarding molecular structures or binding mechanisms.

TiO2 nanosheet/NiO nanorod hierarchical nanostructures: p-n heterojunctions towards efficient photocatalysis

TiO₂ nanosheet/NiO nanorod heterojunction hybrids have been developed through a hydrothermal route, where NiO nanorods (size: 5 nm in diameter and 20-40 nm in length) are deposited at the {0 0 1} facet of anatase TiO₂ nanosheets. The photocatalysts were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), N₂ adsorption-desorption analysis, UV-vis spectroscopy, X-ray photoelectron spectroscopy (XPS), photoluminescence spectroscopy and time-resolved fluorescence. The TiO₂/NiO photocatalysts exhibited good photocatalytic activities towards the degradation of methyl blue (MB) and phenol, and hydrogen generation efficiency under visible light irradiation. The maximum rate constant can be reached 0.0279 min^-1 and 0.0135 min^-1 respectively, which are about 12 and 10 times higher than that of TiO₂ nanosheets. And the hydrogen generation efficiency is 10 times higher than physical mixing of TiO₂ and NiO. Photocatalytic degradation efficiency remains more than 90% after 6 times cycle dye degradation, and the H₂ production efficiency is almost the same after four cycles, suggesting good stability and reusability. The enhanced photocatalytic activities are associated with the rational design of TiO₂/NiO hierarchical heterojunctions which ensues high photogenerated charge separation efficiency. With the improved photocatalytic performance, the TiO₂/NiO heterojunction hybrids are expected to be potential photocatalysts in environmental and energy related areas.

Combining microextraction methods with surface-enhanced Raman spectroscopy towards more selective and sensitive analyte detection by plasmonic metal nanoparticles

Raman signals of analytes can be enhanced on the surface of noble nanoparticles by generating SERS signals, which can be further enhanced using microextraction (ME) techniques.

Nanographene oxide-TiO2 photonic films as plasmon-free substrates for surface-enhanced Raman scattering

The development of nanostructured semiconductors with tailored morphology and electronic properties for surface-enhanced Raman scattering (SERS) has been attracting significant attention as a promising alternative to conventional coinage metal SERS substrates. In this work, functionalized TiO₂ photonic crystals by graphene oxide nanocolloids (nanoGO) are demonstrated as highly sensitive, recyclable, plasmon-free SERS substrates that combine slow-photon amplification effects with the high adsorption capacity and surface reactivity of GO nanosheets. Comparative evaluation of photonic band gap engineered nanoGO-TiO₂ inverse opal films was performed on methylene blue SERS detection under different laser excitations in combination with rigorous theoretical simulations of the photonic band structure. A very low detection limit of 6 × 10^-7 M and an enhancement factor of 5 × 10⁴ along with excellent self-cleaning performance and reusability could be achieved by the interplay of slow-photon effects assisted by interfacial charge transfer between the analyte and the nanoGO-TiO₂ semiconducting substrate. Slow-photon management in combination with judicious engineering of chemical enhancement in photonic nanostructures is accordingly proposed as an advanced approach for the design of efficient dielectric SERS substrates.

Quasi-Metal for Highly Sensitive and Stable Surface-Enhanced Raman Scattering

Compared with the noble-metal surface-enhanced Raman scattering (SERS) substrates activated by the surface plasmon resonance (SPR)-induced electromagnetic mechanism (EM), the relative low sensitivity and stability of the chemical mechanism (CM)-based substrates are the biggest obstacles to their applications. Herein, we report that quasi-metallic VO₂ nanosheet arrays can be used as a sensitive and stable SERS substrate. The lowest detectable limit of analyte adsorbed on the VO₂ nanosheets achieves 10⁻¹⁰ M and the maximum Raman enhancement factor (EF) reaches 6.7 × 10⁷, which is comparable with that of the noble metals. The experimental and theoretical results demonstrate that the SERS performance of the VO₂ nanosheets comes from the strong interfacial interactions based on charge transfer and the vigorous SPR effects. Our research results demonstrate that quasi-metals are very promising SERS detection platforms and reveal that CM, like EM, contributes significantly to the SERS activity of quasi-metals.

•

Surface-enhanced Raman scattering (SERS) on quasi-metallic VO₂

•

High SERS enhancement factor and low limit of detection have been achieved

•

Synergistic effect of electromagnetic enhancement and chemical enhancement

A 3D spongy flexible nanosheet array for on-site recyclable swabbing extraction and subsequent SERS analysis of thiram

A sponge inspired three dimensional flexible aluminum foil based ZnO nanosheet array substrate is described for use in real-world surface enhanced Raman spectroscopic detection. Gold and silver nanoparticles were employed to form numerous hot spots on uniformly grown ZnO nanosheets on the substrate. This flexible spongy substrate can extract analytes (such as the fungicide thiram) from various complex sample surfaces by physical swabbing. Specifically, this substrate was applied to detect thiram on the surface of fruits and vegetables. Non-destructive recycling detection with a relative standard deviation of 6.1% was accomplished by monitoring the characteristic Raman peak at 1382 cm^-1. This modified substrate has a low detection limit (0.2 ng cm^-2 of thiram for apple and tomato), outstanding uniformity (relative standard deviation = 8.9%) and thermal stability (relative standard deviation = 0.9%). Graphical abstract Schematic representation of using a aluminum foil modified with ZnO nanosheets as a flexible and recyclable substrate for SERS analysis of pollutants. The substrate can be cleaned after use by UV irradiation.

Facile Reduction Method Synthesis of Defective MoO2- x Nanospheres Used for SERS Detection with High Chemical Enhancement

Recently, more and more attention has been given to a semiconductor oxide-based surface-enhanced Raman spectroscopy substrate for its great stability and biocompatibility. However, its poor SERS sensitivity limits the applications of semiconductor oxide SERS substrates. In this paper, we provide a facile reduction method to modulate oxygen vacancy concentrations in oxide SERS substrates. Using MoO₂ as an example, the resonance coupling as well as charge transfer between the semiconductor oxide SERS substrate and the target molecules were promoted for the reason of artificial oxygen vacancy embodied in the Raman signals being improved. By using the TEM, SEM, and XPS measurements, we confirmed that we successfully prepared defective MoO_{2- x} with a polycrystalline surface. MoO_{2- x} modulated oxygen vacancy treated with 6 wt % Li shows a very high detection sensitivity of 10^-8 M (4.79 ug/L) for R6G, and the intensity of the Raman signal was highly enhanced. Because of the existence of defective energy levels, resonance coupling, as well as charge transfer between semiconductor and molecules, was obviously promoted. More importantly, the method of modulating oxygen vacancy can be widely used in semiconductor oxide materials for its chemical enhancement capacity can be promoted by artificial oxygen vacancy.

Alternative to Noble Metal Substrates: Metallic and Plasmonic Ti3O5 Hierarchical Microspheres for Surface Enhanced Raman Spectroscopy

Compared with noble metals, improving the sensitivity of semiconducting surface-enhanced Raman scattering (SERS) substrates is of great significance to their fundamental research and practical application of Raman spectroscopy. In this paper, it is found that the SERS sensitivity is increased by 10 000 times by reducing the semiconducting TiO₂ microspheres to quasi-metallic Ti₃O₅ microspheres. Its lowest detectable limit is up to 10^-10 M, which may be the best among the non-noble metal substrates and even reaches or exceeds certain Au/Ag nanostructures to the best of our knowledge. This new type of non-noble metal SERS substrate breaks through the bottleneck of poor stability of conventional semiconductor substrate and can withstand high temperature oxidation at 200 °C and strong acid-base corrosion without performance degradation. Benefiting from its excellent ability of visible-light photocatalytic degradation of organic molecules, the substrate can be reused. Moreover, the new material also exhibits excellent photothermal conversion properties.

A novel ternary heterostructure with dramatic SERS activity for evaluation of PD-L1 expression at the single-cell level

Surface-enhanced Raman scattering (SERS) probes based on a charge transfer (CT) process with high stability and reproducibility are powerful tools under open-air conditions. However, the key problem ahead of practical usage of CT-based SERS technology is how to effectively improve sensitivity. Here, a novel ternary heterostructure SERS substrate, Fe₃O₄@GO@TiO₂, with a significant enhancement factor of 8.08 × 10⁶ was first synthesized. We found the remarkable enhanced effect of SERS signal to be attributed to the resonance effect of CuPc, CT between GO and TiO₂, and enrichment from a porous TiO₂ shell. In addition, we developed a robust SERS probe with good recyclability under visible light illumination on Fe₃O₄@GO@TiO₂ nanocomposites toward ultrasensitive detection of cancer cells down to three cells. We have now successfully applied this probe for in situ quantification and imaging of programmed cell death receptor ligand 1 (PD-L1) on triple-negative breast cancer cell surface at the single-cell level and for monitoring the expression variation of PD-L1 during drug treatment.

A flexible SERS-active film for studying the effect of non-metallic nanostructures on Raman enhancement

Since the discovery of surface enhanced Raman scattering (SERS), the choice of SERS-active materials has been limited mainly to metals, especially gold and silver in the visible spectrum. Although non-metals can also be SERS-active by forming nanostructures or composite structures with SERS-active materials, the mechanism behind it is still unclear and there is no perfect technique to study it. In this work, by constructing a SERS structure on a flexible polydimethylsiloxane film, we provide a way to study the effect of non-metallic nanostructures on Raman enhancement by attaching the above film onto flat and nanostructured surfaces. It was found that a nanoporous silicon surface contributes to an additional, up to five times, Raman enhancement. The pore depth and pore size also influence the observed Raman enhancement. These findings will help us not only to understand the mechanism of SERS involving non-metallic nanostructures, but also to design more efficient SERS structures for various applications.

Convenient chirality transfer from organics to titania: construction and optical properties

Polyethyleneimine (PEI) complexed with chiral d- (or l-) tartaric acid (tart) in water can self-organize into chiral and crystalline PEI/tart assemblies. It has been previously confirmed that the complexes of PEI/tart could work as catalytic/chiral templates to induce the deposition of SiO2 nanofibres with optical activity but without outwards shape chirality such as helices. In this work, we found that the templating functions of PEI/tart were still effective to prompt the deposition of TiO2 to form chiral PEI/tart@TiO2 hybrid nanofibres under aqueous and room temperature conditions within two hours. Furthermore, the co-deposition of TiO2 and SiO2 was also fulfilled to yield chiral PEI/tart@TiO2/SiO2 nanofibres. These TiO2-containing hybrid nanofibres showed non-helical shapes on the length scale; however, chiroptical signals with mirror relation around the UV-Vis absorption band of TiO2 remarkably appeared on their circular dichroism (CD) spectra. By means of the protocols of XRD, TEM, SEM, UV-Vis, CD and XPS, structural features and thermoproperties of the chiral TiO2 and SiO2/TiO2 were investigated.

Recent advances in three-dimensional graphene based materials for catalysis applications

This review presents recent theoretical and experimental progress in the construction, properties, and catalytic applications of 3D graphene-based materials.

Self-directing chiral information in solid-solid transformation: unusual chiral-transfer without racemization from amorphous silica to crystalline silicon

Constructing novel chiral inorganic nanomaterials is an emerging branch in chirality research. In this work, by employing a solid magnesiothermic reaction at 500-600 °C, we reduced chiral SiO₂ nanofibers with average diameter ∼10 nm into chiral Si nanoplates with a size of about several hundred nm. The chirality of the as-prepared Si was judged by the pair of signals with a mirror relationship between 400-500 nm that appeared on the solid-state diffuse reflectance circular dichroism (DRCD) spectra for the l- and d-form Si. Furthermore, the chirality was also confirmed by induced vibrational circular dichroism (VCD) signals corresponding to the absorption bands in the infrared range of achiral organics (polyvinylpyrrolidone K90 and trimethoxyphenylsilane) absorbed onto chiral Si. The as-used SiO₂ nanofibers possessed an ultra high-temperature (up to 900 °C) resistant chirality, which would be due to the asymmetric arrangement of Si and O atoms in small chiral domains (<10 nm) on the Si-O-Si network of SiO₂. During the removal of oxygen atoms from Si-O-Si by Mg atoms, the arrangement of newly formed Si-Si bonds as well as the growth of Si crystals were still templated without racemization from the chiral information in SiO₂. Consequently, the subnano/nano-scale (<10 nm) chiral information was in situ transferred via the so-called self-transfer mechanism, even though there was no retention of the outward shapes of the length-scale nanofiber SiO₂ reactants in the Si products. This work offers a feasible chemical method to prepare chiral Si using abundant SiO₂ raw materials.

A metallic molybdenum dioxide with high stability for surface enhanced Raman spectroscopy

Compared with noble metals, semiconductors with surface plasmon resonance effect are another type of SERS substrate materials. The main obstacles so far are that the semiconducting materials are often unstable and easy to be further oxidized or decomposed by laser irradiating or contacting with corrosive substances. Here, we report that metallic MoO₂ can be used as a SERS substrate to detect trace amounts of highly risk chemicals including bisphenol A (BPA), dichloropheno (DCP), pentachlorophenol (PCP) and so on. The minimum detectable concentration was 10⁻⁷ M and the maximum enhancement factor is up to 3.75 × 10⁶. To the best of our knowledge, it may be the best among the metal oxides and even reaches or approaches to Au/Ag. The MoO₂ shows an unexpected high oxidation resistance, which can even withstand 300 °C in air without further oxidation. The MoO₂ material also can resist long etching of strong acid and alkali.

Semiconducting materials are potential SERS substrates as alternatives to noble metals, but often suffer from poor stabilities and sensitivities. Here, the authors use molybdenum dioxide as a SERS material, showing high enhancement factors and stability to oxidation even at high temperatures.

Carbon-Incorporated NiO/TiO2 Mesoporous Shells with p-n Heterojunctions for Efficient Visible Light Photocatalysis

Carbon-incorporated mesoporous NiO/TiO₂ (NiO/TiO₂/C) hybrid shells as low-cost and highly efficient visible light photocatalysts have been developed. The NiO/TiO₂/C hybrid shells were synthesized by choosing polystyrene nanospheres as templates, followed by TiO₂ and NiO coating, and finally the calcination post-treatment to carbonize PS with the aid of metal oxides. Polystyrene nanospheres serve dual purposes as both a template to ensure the hollow structure and the electrically conductive graphite carbon source. Evaluation of their photocatalytic activity by organic pollutes (rhodamine B, methylene blue, and phenol) degradation and H₂ production under visible light demonstrated the superior photocatalytic performance, thanks to the enhanced visible-light absorption and exciton separation associated with the incorporation of electrically conductive graphite carbon.

"RaMassays": Synergistic Enhancement of Plasmon-Free Raman Scattering and Mass Spectrometry for Multimodal Analysis of Small Molecules

SiO₂/TiO₂ core/shell (T-rex) beads were exploited as "all-in-one" building-block materials to create analytical assays that combine plasmon-free surface enhanced Raman scattering (SERS) and surface assisted laser desorption/ionization (SALDI) mass spectrometry (RaMassays). Such a multi-modal approach relies on the unique optical properties of T-rex beads, which are able to harvest and manage light in both UV and Vis range, making ionization and Raman scattering more efficient. RaMassays were successfully applied to the detection of small (molecular weight, M.W. <400 Da) molecules with a key relevance in biochemistry and pharmaceutical analysis. Caffeine and cocaine were utilized as molecular probes to test the combined SERS/SALDI response of RaMassays, showing excellent sensitivity and reproducibility. The differentiation between amphetamine/ephedrine and theophylline/theobromine couples demonstrated the synergistic reciprocal reinforcement of SERS and SALDI. Finally, the conversion of L-tyrosine in L-DOPA was utilized to probe RaMassays as analytical tools for characterizing reaction intermediates without introducing any spurious effects. RaMassays exhibit important advantages over plasmonic nanoparticles in terms of reproducibility, absence of interference and potential integration in multiplexed devices.

Hydrothermal etching fabrication of TiO2@graphene hollow structures: mutually independent exposed {001} and {101} facets nanocrystals and its synergistic photocaltalytic effects

Highly exposed facets TiO2 attracts enormous attention due to its excellent separation effect of photogenerated electron-hole pairs and induced high performance of photocatalytic activity. Herein, a novel hydrothermal etching reaction was used to synthesize graphene-wrapped TiO2 hollow core-shell structures. Different with the reported co-exposed facets TiO2 single crystal nanoparticles, the present TiO2 core layer is composed by the mutually independent exposed {001} and {101} facets nanocrystals. Combined with the reduced graphene oxide shell layer, this graphene-wrapped TiO2 hollow core-shell structures formed a Z-scheme photocatalytic system, which possess simultaneously the high charge-separation efficiency and strong redox ability. Additionally, the as-prepared samples show a higher absorption property for organic molecules and visible light due to the presence of graphene. All of these unique properties ensure the excellent photocatalytic activity for the graphene-wrapped TiO2 hollow structures in the synergistic photo-oxidation of organic molecules and photo-reduced of Cr(VI) process. The TiO2 core composed with mutually independent exposed {001} and {101} facets nanocrystals is propose to play an important role in the fabrication of this Z-scheme photocatalytic system. Fabrication of Z-scheme photocatalytic system based on this unique exposed facets TiO2 nanocrystals will provides a new insight into the design and fabrication of advanced photocatalytic materials.