Alkali Metal Carbenoids: A Case of Higher Stability of the Heavier Congeners

Synthesis, Characterization, and Trapping of a Cyclic Diborylcarbene, an Electrophilic Carbene

A carbene bearing two geminal boryl substituents, called diborylcarbene (DBC), has been predicted to be highly Lewis acidic in sharp contrast to the well-studied persistent carbenes stabilized by π-donating substituents. Studies on DBC have been limited to either the base-trapping or theoretical calculations. Herein, we developed chemical equivalents for DBC, namely, K/X-diborylcarbenoids 2_X (X = F or Cl). Treatment of 2_F with Al(C₆F₅)₃ yielded [AlF(C₆F₅)₃]^--stabilized DBC 1-FAl, which showed a significant low-field shift of the carbenoid carbon from 169 ppm (doublet, coupling with ¹⁹F) to 242 ppm (singlet). The loss of halogen was also detected through electrospray ionization time-of-flight mass spectrometry analysis of 2_X only in the presence of Al(C₆F₅)₃. Generated DBC 1 from 1-FAl or 2_Cl was successfully trapped with excess amounts of trialkylphosphines (PR₃, R = Me or Et), which afforded the corresponding DBC-PR₃ adducts. In addition, the Lewis acidity of DBC 1 was evaluated both experimentally and theoretically to reveal that 1 is one of the most Lewis acidic species among neutral molecules.

Isolation and Reactivity of Stannylenoids Stabilized by Amido/Imino Ligands

The reaction of the lithium aryl(silyl)amide Dipp(ⁱ Pr₃ Si)NLi (Dipp=2,6-ⁱ Pr₂ C₆ H₃ ) with one equivalent of SnCl₂ in THF gave a novel stannylenoid Dipp(ⁱ Pr₃ Si)NSnCl⋅LiCl(THF)₂ . Heating the solution of amidostannylenoid in toluene to 80 °C resulted in dimeric amido(chloro)stannylene [Dipp(ⁱ Pr₃ Si)NSnCl]₂ , which can be converted to bis(amido)stannylene Sn[N(Dipp)(ⁱ Pr₃ Si)]₂ and amido(imino)stannylene Sn[N(Dipp)(ⁱ Pr₃ Si)][IPrN] (IPrN=bis(2,6-diisopropylphenyl)imidazolin-2-imino). Treatment of bis(imino)stannylenoid [IPrN]₂ Sn(Cl)Li with N₂ O resulted in the dimeric complex [IPrNSn(Cl)OLi]₂ . All compounds were characterized by NMR, elementary analysis, and X-ray structural determination.

Structural and Electronic Effects on Phosphine Chalcogenide Stabilized Silicon Centers in Four-Membered Heterocyclic Cations

Understanding the interplay of structural and electronic parameters in the stabilization of Lewis acidic silicon centers is crucial for stereochemical questions and applications in bond activation and catalytic transformations. Phosphine chalcogenide functionalized (Ch = O, S, and Se) hydrosilanes having tert-butyl and 2,4,6-trimethoxyphenyl (TMP) substituents on the silicon atom were synthesized, and the ring-closing reactions to afford the heterocyclic four-membered CPChSi cations were investigated. Synthetic access was only achieved for the sulfur- and selenium-based cations. A thorough study by means of single-crystal X-ray structure determination, NMR spectroscopic data, and density functional theory (DFT) calculations provided insight into important electronic and structural parameters affecting the stability of the intramolecularly stabilized cations. Detailed structural considerations were made on the contributions to the ring strain (angular strain and steric repulsion). Thermochemical investigations showed that the substituents on the silicon and phosphorus atoms play an important role for the stability of the cationic heterocycles. In the absence of large steric repulsions through bulky substituents (methyl groups on silicon and tert-butyl groups on phosphorus), an intrinsic stability sequence of the intramolecular Ch-Si coordination depending on the chalcogen atom in the direction Se ≤ S < O can be observed. However, the order is reversed (O < S < Se) in the case of strong repulsions between sterically demanding substituents (tert-butyl groups on both silicon and phosphorus atoms). Natural bond orbital (NBO) analysis supported the explanations for the observed deshielding trends in ³¹P NMR spectroscopy and revealed that the O-Si bond is more ionic in nature compared to the S-Si and Se-Si bonds, with the latter exhibiting higher covalent character due to a more efficient charge transfer through a σ-type n_Ch → p_Si interaction.

Synthesis, Crystal and Electronic Structures of a Thiophosphinoyl- and Amino-Substituted Metallated Ylide

α-Metallated ylides have revealed themselves to be versatile reagents for the introduction of ylide groups. Herein, we report the synthesis of the thiophosphinoyl and piperidyl (Pip) substituted α-metallated ylide [Ph2 (Pip)P=C-P(S)Ph2 ]M (M=Li, Na, K) through a four-step synthetic procedure starting from diphenylmethylphosphine sulfide. Metallation of the ylide intermediate was successfully accomplished with different alkali metal bases delivering the lithium, sodium and potassium salts, the latter isolable in high yields. Structure analyses of the lithium and potassium compounds in the solid state with and without crown ether revealed different aggregates (monomer, dimer and hexamer) with the metals coordinated by the thiophosphoryl moiety and ylidic carbon atom. Although the piperidyl group does not coordinate to the metal, it significantly contributes to the stability of the yldiide by charge delocalization through negative hyperconjugation.

Alkali-Metal Mediation: Diversity of Applications in Main-Group Organometallic Chemistry

Organolithium compounds have been at the forefront of synthetic chemistry for over a century, as they mediate the synthesis of myriads of compounds that are utilised worldwide in academic and industrial settings. For that reason, lithium has always been the most important alkali metal in organometallic chemistry. Today, that importance is being seriously challenged by sodium and potassium, as the alkali-metal mediation of organic reactions in general has started branching off in several new directions. Recent examples covering main-group homogeneous catalysis, stoichiometric organic synthesis, low-valent main-group metal chemistry, polymerization, and green chemistry are showcased in this Review. Since alkali-metal compounds are often not the end products of these applications, their roles are rarely given top billing. Thus, this Review has been written to alert the community to this rising unifying phenomenon of "alkali-metal mediation".

Direct and straightforward transfer of C1 functionalized synthons to phosphorous electrophiles for accessing gem-P-containing methanes

The direct transfer of different α-substituted methyllithium reagents to chlorinated phosphorous electrophiles of diverse oxidation state (phosphates, phosphine oxides and phosphines) is proposed as an effective strategy to synthesize geminal P-containing methanes. The methodology relies on the efficient nucleophilic substitution conducted on the P-chlorine linkage. Uniformly high yields are observed regardless the specific nature of the carbanion employed: once established the conditions for generating the competent nucleophile (LiCH₂Hal, LiCHHal₂, LiCH₂CN, LiCH₂SeR etc.) the homologated compounds are obtained via a single operation. Some P-containing formal carbanions have been evaluated in transferring processes, including the carbonyl-difluoromethylation of the opioid agent Hydrocodone.

Taking advantage of lithium monohalocarbenoid intrinsic α-elimination in 2-MeTHF: controlled epoxide ring-opening en route to halohydrins

The intrinsic degradative α-elimination of Li carbenoids somehow complicates their use in synthesis as C1-synthons. Nevertheless, we herein report how boosting such an α-elimination is a straightforward strategy for accomplishing controlled ring-opening of epoxides to furnish the corresponding β-halohydrins. Crucial for the development of the method is the use of the eco-friendly solvent 2-MeTHF, which forces the degradation of the incipient monohalolithium, due to the very limited stabilizing effect of this solvent on the chemical integrity of the carbenoid. With this approach, high yields of the targeted compounds are consistently obtained under very high regiocontrol and, despite the basic nature of the reagents, no racemization of enantiopure materials is observed.

Easy Access to Enantiomerically Pure Heterocyclic Silicon-Chiral Phosphonium Cations and the Matched/Mismatched Case of Dihydrogen Release

Phosphonium ions are widely used in preparative organic synthesis and catalysis. The provision of new types of cations that contain both functional and chiral information is a major synthetic challenge and can open up new horizons in asymmetric cation-directed and Lewis acid catalysis. We discovered an efficient methodology towards new Si-chiral four-membered CPSSi* heterocyclic cations. Three synthetic approaches are presented. The stereochemical sequence of anchimerically assisted cation formation with B(C6 F5 )3 and subsequent hydride addition was fully elucidated and proceeds with excellent preservation of the chiral information at the stereogenic silicon atom. Also the mechanism of dihydrogen release from a protonated hydrosilane was studied in detail by the help of Si-centered chirality as stereochemical probe. Chemoselectivity switch (dihydrogen release vs. protodesilylation) can easily be achieved through slight modifications of the solvent. A matched/mismatched case was identified and the intermolecularity of this reaction supported by spectroscopic, kinetic, deuterium-labeling experiments, and quantum chemical calculations.

Solvation Effects on the Structure and Stability of Alkali Metal Carbenoids

s-Block metal carbenoids are carbene synthons and applied in a myriad of organic transformations. They exhibit a strong structure-activity relationship, but this is only poorly understood due to the challenging high reactivity and sensitivity of these reagents. Here, we report on systematic VT and DOSY NMR studies, XRD analyses as well as DFT calculations on a sulfoximinoyl-substituted model system to explain the pronounced solvent dependency of the carbenoid stability. While the sodium and potassium chloride carbenoids showed high stabilities independent of the solvent, the lithium carbenoid was stable at room temperature in THF but decomposed at -10 °C in toluene. These divergent stabilities could be explained by the different structures formed in solution. In contrast to simple organolithium reagents, the monomeric THF-solvate was found to be more stable than the dimer in toluene, since the latter more readily forms direct Li/Cl interactions which facilitate decomposition via α-elimination.

Geminal Dianions Stabilized by Main Group Elements

This review is dedicated to the chemistry of stable and isolable species that bear two lone pairs at the same C center, i.e., geminal dianions, stabilized by main group elements. Three cases can thus be considered: the geminal-dilithio derivative, for which the two substituents at C are neutral, the yldiide derivatives, for which one substituent is neutral while the other is charged, and finally the geminal bisylides, for which the two substituents are positively charged. In this review, the syntheses and electronic structures of the geminal dianions are presented, followed by the studies dedicated to their reactivity toward organic substrates and finally to their coordination chemistry and applications.

Telescoped, Divergent, Chemoselective C1 and C1-C1 Homologation of Imine Surrogates: Access to Quaternary Chloro- and Halomethyl-Trifluoromethyl Aziridines

A conceptually novel, high‐yielding, mono‐ or bis‐homologation was realized with lithium halocarbenoids and enables the one‐step, fully chemocontrolled assembly of a new class of quaternary trifluoromethyl aziridines. Trifluoroacetimidoyl chlorides (TFAICs) act as convenient electrophilic platforms, enabling the addition of either one or two homologating elements by simply controlling the stoichiometry of the process. Mechanistic studies highlighted that the homologation event, carried out with two different carbenoids (LiCH₂Cl and LiCH₂F), leads to fluoromethyl analogues in which the first nucleophile is employed for constructing the cycle and the second for decorating the resulting molecular architecture.

Modular and Chemoselective Strategy for the Direct Access to α-Fluoroepoxides and Aziridines via the Addition of Fluoroiodomethyllithium to Carbonyl-Like Compounds

An expeditious, high-yielding synthesis of rare α-fluoroepoxides and α-fluoroaziridines through the addition of the unkown fluoroiodomethyllithium (LiCHIF)-formed via deprotonation the commercially available fluoroiodomethane with a lithium amide base-to carbonyl-like compounds is documented. The ring-closure reactions, leading to α-fluorinated three-membered heterocycles, rely on the diversely reactive C-I and C-F bonds. Excellent chemoselectivity was observed in the presence of highly sensitive functionalities-aldehyde, ketone, nitrile, alkene-which remained untouched during the homologation sequence.

Homologation chemistry with nucleophilic α-substituted organometallic reagents: chemocontrol, new concepts and (solved) challenges

The transfer of a reactive nucleophilic CH2X unit into a preformed bond enables the introduction of a fragment featuring the exact and desired degree of functionalization through a single synthetic operation. The instability of metallated α-organometallic species often poses serious questions regarding the practicability of using this conceptually intuitive and simple approach for forming C-C or C-heteroatom bonds. A deep understanding of processes regulating the formation of these nucleophiles is a precious source of inspiration not only for successfully applying theoretically feasible transformations (i.e. determining how to employ a given reagent), but also for designing new reactions which ultimately lead to the introduction of molecular complexity via short experimental sequences.

Efficient Access to All-Carbon Quaternary and Tertiary α-Functionalized Homoallyl-type Aldehydes from Ketones

β,γ-Unsaturated aldehydes with all-carbon quaternary or tertiary α-centers were rapidly assembled from ketones through a unique synthetic operation consisting of 1) C₁ homologation, 2) Lewis acid mediated epoxide-aldehyde isomerization, and 3) electrophilic trapping. The synthetic equivalence of a vinyl oxirane and a β,γ-unsaturated aldehyde is the key concept of this previously undisclosed tactic. Mechanistic studies and labeling experiments suggest that an aldehyde enolate is a crucial intermediate. The homologating carbenoid formation plays a critical role in determining the chemoselectivity.

Alkali Metal Chlorine and Bromine Carbenoids: Their Thermal Stability and Structural Properties

The synthesis and structures of a series of M/X carbenoids of the type [Ph₂ P(S)]₂ CMX with M=Li, Na, and K and X=Cl and Br are reported, amongst the first isolated Na/Br and K/Br carbenoids. NMR spectroscopic as well as crystallographic studies showed distinct differences between the lithium carbenoids and their heavier congeners. In the solid state, all carbenoids showed no direct metal-carbon interaction, but an interaction between the metal and the halogen atom. This contact is only very weak in the case of the Li/Br carbenoid, but much more pronounced in the corresponding potassium and sodium compounds. Nevertheless, these interactions did not significantly influence the stability of the carbenoids by weakening the C-X bond and facilitating the MX elimination. As such all compounds were found to be stable up to approximately 60 °C in solution. Hence, M-X interactions-albeit being an essential feature for the structure formation of carbenoids-are not the only criterion determining the stability of such compounds. In the present systems, the stabilization by the thiophosphinoyl moieties is more important than the metal/halogen combination.

Taming Metal/Fluorine Carbenoids

Although Li/Cl carbenoids are versatile reagents in organic synthesis, the controlled handling of the extremely reactive and labile M/F carbenoids remains a challenge. We now show that even these compounds can be stabilized and isolated in solid state, as well as in solution. Particularly the sodium and potassium compounds exhibit a remarkable stability, thus allowing the first isolation of a room-temperature-stable fluorine carbenoid. Spectroscopic, as well as DFT studies confirmed the pronounced carbenoid character, showing M-F-C interactions with elongated C-F bonds. The different stabilities of the carbenoids was found to originate from the different strength of the M-F interaction. Hence, the lithium compounds are considerably more reactive than their heavier congeners. Reactivity studies showed that the nature of the metal also influences the reactivity, resulting in different selectivity in the addition to thioketones.

Stability and reactivity control of carbenoids: recent advances and perspectives

Metal carbenoids such as lithium or Simmons-Smith-type reagents are widely used in organic synthesis, particularly in cyclopropanation and homologation reactions. These reagents are often highly reactive and thermally labile, thus limiting their isolation and hampering the development of new synthetic applications. Recent years however, have shown that by means of systematic stabilization a control of reactivity and the development of new applications is possible. This feature article documents recent developments in the control of carbenoid reactivity and stability and highlights structural and electronic properties as well as applications in main group element and transition metal chemistry.