Enhanced Photoexcited Carrier Separation in Oxygen-Doped ZnIn2 S4 Nanosheets for Hydrogen Evolution

A compendium of all-in-one solar-driven water splitting using ZnIn2S4-based photocatalysts: guiding the path from the past to the limitless future

Photocatalytic water splitting represents a leading approach to harness the abundant solar energy, producing hydrogen as a clean and sustainable energy carrier. Zinc indium sulfide (ZIS) emerges as one of the most captivating candidates attributed to its unique physicochemical and photophysical properties, attracting much interest and holding significant promise in this domain. To develop a highly efficient ZIS-based photocatalytic system for green energy production, it is paramount to comprehensively understand the strengths and limitations of ZIS, particularly within the framework of solar-driven water splitting. This review elucidates the three sequential steps that govern the overall efficiency of ZIS with a sharp focus on the mechanisms and inherent drawbacks associated with each phase, including commonly overlooked aspects such as the jeopardising photocorrosion issue, the neglected oxidative counter surface reaction kinetics in overall water splitting, the sluggish photocarrier dynamics and the undesired side redox reactions. Multifarious material design strategies are discussed to specifically mitigate the formidable limitations and bottleneck issues. This review concludes with the current state of ZIS-based photocatalytic water splitting systems, followed by personal perspectives aimed at elevating the field to practical consideration for future endeavours towards sustainable hydrogen production through solar-driven water splitting.

Engineering ZnIn2S4 with efficient charge separation and utilization for synergistic accelerate dual-function photocatalysis

Combining photocatalytic reduction with organic synthetic oxidation in the same photocatalytic redox system can effectively utilize photoexcited electrons and holes from solar to chemical energy. Here, we stabilized 0D Au clusters on the substrate surface of Zn vacancies modified 2D ZnIn2S4 (ZIS-V) nanosheets by chemically bonding Au-S interaction, forming surfactant functionalized Au/ZIS-V photocatalyst, which can not only synergistic accelerate the selective oxidation of phenylcarbinol to value-added products coupled with clean energy hydrogen production but also further drive photocatalytic CO2-to-CO conversion. An internal electric field of Au/ZIS-V ohmic junction and Zn vacancies synchronously promote the photoexcited charge carrier separation and transfer to optimized active sites for redox reactions. Compared with CO2 reduction in water and the pristine ZnIn2S4, the reaction thermodynamics and kinetics of CO2 reduction over the Au/ZIS-V were simultaneously improved about 11.09 and 45.51 times, respectively. Moreover, the photocatalytic redox mechanisms were also profoundly studied by 13CO2 isotope tracing tests, in situ electron paramagnetic resonance (in situ EPR), in situ X-ray photoelectron spectroscopy (in situ XPS), in situ diffuse reflection infrared Fourier transform spectroscopy (in situ DRIFTS) and density functional theory (DFT) characterizations, etc. These results demonstrate the advantages of vacancies coupled with metal clusters in the synergetic enhancement of photocatalytic redox performance and have great potential applications in a wide range of environments and energy.

Full-Space Electric Field in Mo-Decorated Zn2In2S5 Polarization Photocatalyst for Oriented Charge Flow and Efficient Hydrogen Production

Integration of photocatalytic hydrogen (H2) evolution with oxidative organic synthesis presents a highly attractive strategy for the simultaneous production of clean H2 fuel and high-value chemicals. However, the sluggish dynamics of photogenerated charge carriers across the photocatalysts result in low photoconversion efficiency, hindering the wide applications of such a technology. Herein, this work overcomes this limitation by inducing the full-space electric field via charge polarization engineering on a Mo cluster-decorated Zn2In2S5 (Mo-Zn2In2S5) photocatalyst. Specifically, this full-space electric field arises from a cascade of the bulk electric field (BEF) and local surface electric field (LSEF), triggering the oriented migration of photogenerated electrons from [Zn-S] regions to [In-S] regions and eventually to Mo cluster sites, ensuring efficient separation of bulk and surface charge carriers. Moreover, the surface Mo clusters induce a tip enhancement effect to optimize charge transfer behavior by augmenting electrons and proton concentration around the active sites on the basal plane of Zn2In2S5. Notably, the optimized Mo1.5-Zn2In2S5 catalyst achieves exceptional H2 and benzaldehyde production rates of 34.35 and 45.31 mmol gcat -1 h-1, respectively, outperforming pristine ZnIn2S4 by 3.83- and 4.15-fold. These findings mark a significant stride in steering charge flow for enhanced photocatalytic performance.

Room-Temperature High-Performance Photodetector and Phototransistor Based on PdSe2/ZnIn2S4 Alloy Heterojunctions

Various semiconductor devices have been developed based on 2D heterojunction materials owing to their distinctive optoelectronic properties. However, to achieve efficient charge transfer at their interface remains a major challenge. Herein, an alloy heterojunction concept is proposed. The sulfur vacancies in ZnIn2S4 are filled with selenium atoms of PdSe2. This chemically bonded heterojunction can significantly enhance the separation of photocarriers, providing notable advantages in the field of photoelectric conversion. As a demonstration, a two-terminal photodetector based on the PdSe2/ZnIn2S4 heterojunction materials is fabricated. The photodetector exhibits stable operation in ambient conditions, showcasing superior performance in terms of large photocurrent, high responsivity (48.8 mA W-1) and detectivity (1.98 × 1011 Jones). To further validate the excellent optoelectronic performance of the heterojunction, a tri-terminal phototransistor is also fabricated. Benefiting from gate voltage modulation, the photocurrent is amplified to milliampere level, and the responsivity is increased to 229.14 mA W-1. These findings collectively demonstrate the significant potential of the chemically bonded PdSe2/ZnIn2S4 alloy heterojunction for future optoelectronic applications.

Electronic Structure Modulation of Oxygen-Enriched Defective CdS for Efficient Photocatalytic H2O2 Production

Artificial photosynthesis for hydrogen peroxide (H2O2) presents a sustainable and environmentally friendly approach to generate clean fuel and chemicals. However, the catalytic activity is hindered by challenges such as severe charge recombination, insufficient active sites, and poor selectivity. Here, a robust strategy is proposed to regulate the electronic structure of catalyst by the collaborative effect of defect engineering and dopant. The well designed oxygen-doped CdS nanorods with S2- defects and Cd2+ 4d10 electron configuration (CdS-O,Sv) is successfully synthesized, and the Cd2+ active sites around S defects or oxygen atoms exhibit rapid charge separation, suppressed carrier recombination, and enhanced charge utilization. Consequently, a remarkable H2O2 production rate of 1.62 mmol g-1 h-1 under air conditions is acquired, with an apparent quantum yield (AQY) of 9.96% at a single wavelength of 450 nm. This work provides valuable insights into the synergistic effect between defect and doping on catalytic activity.

Band Structure Tuning via Pt Single Atom Induced Rapid Hydroxyl Radical Generation toward Efficient Photocatalytic Reforming of Lignocellulose into H2

Photocatalytic lignocellulose reforming for H2 production presents a compelling solution to solve environmental and energy issues. However, achieving scalable conversion under benign conditions faces consistent challenges including insufficient active sites for H2 evolution reaction (HER) and inefficient lignocellulose oxidation directly by photogenerated holes. Herein, it is found that Pt single atom-loaded CdS nanosheet (PtSA-CdS) would be an active photocatalyst for lignocellulose-to-H2 conversion. Theoretical and experimental analyses confirm that the valence band of CdS shifts downward after depositing isolated Pt atoms, and the slope of valence band potential on pH for PtSA-CdS is more positive than Nernstian equation. These characteristics allow PtSA-CdS to generate large amounts of •OH radicals even at pH 14, while the capacity is lacking with CdS alone. The employment of •OH/OH- redox shuttle succeeds in relaying photoexcited holes from the surface of photocatalyst, and the •OH radicals can diffuse away to decompose lignocellulose efficiently. Simultaneously, surface Pt atoms, featured with a thermoneutralΔ G H ∗ $\Delta G_{\mathrm{H}}^{\mathrm{*}}$ , would collect electrons to expedite HER. Consequently, PtSA-CdS performs a H2 evolution rate of 10.14 µmol h-1 in 1 m KOH aqueous solution, showcasing a remarkable 37.1-fold enhancement compared to CdS. This work provides a feasible approach to transform waste biomass into valuable sources.

Synergistic effect of Na doping and CoSe2 cocatalyst for enhanced photocatalytic hydrogen evolution performance of ZnIn2S4

Element doping has been demonstrated as a useful strategy to regulate the band gap and electronic structure of photocatalyst for improving photocatalytic activity. Herein, ZnIn2S4 (ZIS) nanosheets were doped with alkali metal ions (Li+, Na+ or K+) by a simple solution method. Experimental characterizations reveal that alkali metal ions doping reduce the band gap, raise the conduction band position, and improve surface hydrophilicity of ZIS. In addition, theoretical calculations show that Na doping increases the electron density at valence band maximum and surrounding S atom, which is conducive to produce more electrons and effective utilization of electrons, respectively. Benefited from above factors, Na-doped ZIS (Na-ZIS) shows the highest photocatalytic hydrogen evolution performance. Furthermore, CoSe2 cocatalyst is loaded on the surface of Na-ZIS (CS/Na-ZIS), which further improve the charge separation and prolong the lifetime of charges. As a result, the optimized CS/Na-ZIS shows a H2 evolution rate of 4525 μmol·g-1·h-1 with an apparent quantum efficiency of 27.5 % at 420 nm, which are much higher than that of pure ZIS. This study provides an in-depth understanding of the synergistic effect of Na doping and CoSe2 cocatalyst in ameliorating photocatalytic activity.

Local polarization redistribution in ZnmIn2S3+m for the enhancing synergetic piezo-photocatalytic overall water splitting

Piezo-photocatalytic water (deuterium oxide) decomposition is a promising strategy for realizing renewable energy, but the manipulation of the polar center remains a big challenge. This study uses a simple low-temperature hydrothermal process to successfully manufacture ZnmIn2Sm+3 (m = 1-3) (ZnIn2S4, Zn2In2S5 and Zn3In2S6). Incorporating both experimental and theoretical analyses, the structural contraction and local polarization of the Zn-S bond in Zn2In2S5 enhance the piezoelectric response and surface charge accumulation, which facilitate charge transfer and reduce the activation energy of water. Remarkably, Zn2In2S5 exhibits excellent piezoelectric photocatalytic total water splitting performance (H2/O2: 4284.72/1967.00 μmol g-1h-1), which is 1.77 times that of photocatalytic performance. Moreover, a significant enhancement in D2O splitting performance can be obtained for the optimized Zn2In2S5. Our work offers valuable insights into the disclosure of local polarization in catalysts for enhancing piezo-photocatalytic overall water splitting.

Recent progress in defect-engineered metal oxides for photocatalytic environmental remediation

Rapid industrial advancement over the last few decades has led to an alarming increase in pollution levels in the ecosystem. Among the primary pollutants, harmful organic dyes and pharmaceutical drugs are directly released by industries into the water bodies which serves as a major cause of environmental deterioration. This warns of a severe need to find some sustainable strategies to overcome these increasing levels of water pollution and eliminate the pollutants before being exposed to the environment. Photocatalysis is a well-established strategy in the field of pollutant degradation and various metal oxides have been proven to exhibit excellent physicochemical properties which makes them a potential candidate for environmental remediation. Further, with the aim of rapid industrialization of photocatalytic pollutant degradation technology, constant efforts have been made to increase the photocatalytic activity of various metal oxides. One such strategy is the introduction of defects into the lattice of the parent catalyst through doping or vacancy which plays a major role in enhancing the catalytic activity and achieving excellent degradation rates. This review provides a comprehensive analysis of defects and their role in altering the photocatalytic activity of the material. Various defect-rich metal oxides like binary oxides, perovskite oxides, and spinel oxides have been summarized for their application in pollutant degradation. Finally, a summary of existing research, followed by the existing challenges along with the potential countermeasures has been provided to pave a path for the future studies and industrialization of this promising field.

Recent Advances on Pulsed Laser Deposition of Large-Scale Thin Films

2D thin films, possessing atomically thin thickness, are emerging as promising candidates for next-generation electronic devices, due to their novel properties and high performance. In the early years, a wide variety of 2D materials are prepared using several methods (mechanical/liquid exfoliation, chemical vapor deposition, etc.). However, the limited size of 2D flakes hinders their fundamental research and device applications, and hence the effective large-scale preparation of 2D films is still challenging. Recently, pulsed laser deposition (PLD) has appeared to be an impactful method for wafer-scale growth of 2D films, owing to target-maintained stoichiometry, high growth rate, and efficiency. In this review, the recent advances on the PLD preparation of 2D films are summarized, including the growth mechanisms, strategies, and materials classification. First, efficacious strategies of PLD growth are highlighted. Then, the growth, characterization, and device applications of various 2D films are presented, such as graphene, h-BN, MoS2, BP, oxide, perovskite, semi-metal, etc. Finally, the potential challenges and further research directions of PLD technique is envisioned.

Photoreceptor-Mimetic Microflowers for Restoring Light Responses in Degenerative Retina through a 2D Nanopetal/Cell Biointerface

Retinitis pigmentosa is the main cause of inherited human blindness and is associated with dysfunctional photoreceptors (PRs). Compared with traditional methods, optoelectronic stimulation can better preserve the structural integrity and genetic content of the retina. However, enhancing the spatiotemporal accuracy of stimulation is challenging. Quantum dot-doped ZnIn2S4 microflowers (MF) are utilized to construct a biomimetic photoelectric interface with a 0D/3D heterostructure, aiming to restore the light response in PR-degenerative mice. The MF bio interface has dimensions similar to those of natural PRs and can be distributed within the curved spatial region of the retina, mimicking cellular dispersion. The soft 2D nano petals of the MF provide a large specific surface area for photoelectric activation and simulate the flexibility interfacing between cells. This bio interface can selectively restore the light responses of seven types of retina ganglion cells that encode brightness. The distribution of responsive cells forms a pattern similar to that of normal mice, which may reflect the generation of the initial "neural code" in the degenerative retina. Patch-clamp recordings indicate that the bio interface can induce spiking and postsynaptic currents at the single-neuron level. The results will shed light on the development of a potential bionic subretinal prosthetic toolkit for visual function restoration.

In Situ Etching-Hydrolysis Strategy To Construct an In-Plane ZnIn2S4/In(OH)3 Heterojunction with Enhanced CO2 Photoreduction Performance

The in-plane heterojunctions with atomic-level thickness and chemical-bond-connected tight interfaces possess high carrier separation efficiency and fully exposed surface active sites, thus exhibiting exceptional photocatalytic performance. However, the construction of in-plane heterojunctions remains a significant challenge. Herein, we prepared an in-plane ZnIn2S4/In(OH)3 heterojunction (ZISOH) by partial conversion of ZnIn2S4 to In(OH)3 through the addition of H2O2. This in situ oxidation etching-hydrolysis approach enables the ZISOH heterojunction to not only preserve the original nanosheet morphology of ZnIn2S4 but also form an intimate interface. Moreover, generated In(OH)3 serves as an electron-accepting platform and also promotes the adsorption of CO2. As a result, the heterojunction exhibits a remarkably enhanced performance for photocatalytic CO2 reduction. The production rate and selectivity of CO reach 1760 μmol g-1 h-1 and 78%, respectively, significantly higher than those of ZnIn2S4 (842 μmol g-1 h-1 and 65%). This work puts forward a feasible and facile approach to construct in-plane heterojunctions to enhance the photocatalytic performance of two-dimensional metal sulfides.

Effective Photocatalytic Ethanol Reforming into High-Value-Added Multicarbon Compound Coupled with H2 Production Over Pt-S3 Sites at PtSA-ZnIn2S4 Interface

Selective photocatalytic production of high-value acetaldehyde concurrently with H2 from bioethanol is an appealing approach to meet the urgent environment and energy issues. However, the difficult ethanol dehydrogenation and insufficient active sites for proton reduction within the catalysts, and the long spatial distance between these two sites always restrict their catalytic activity. Here, guided by the strong metal-substrate interaction effect, an atomic-level catalyst design strategy to construct Pt-S3 single atom on ZnIn2S4 nanosheets (PtSA-ZIS) is demonstrated. As active center with optimized H adsorption energy to facilitate H2 evolution reaction, the unique Pt single atom also donates electrons to its neighboring S atoms with electron-enriched sites formed to activate the O─H bond in *CH3CHOH and promote the desorption of *CH3CHO. Thus, the synergy between Pt single atom and ZIS together will reduce the energy barrier for the ethanol oxidization to acetaldehyde, and also narrow the spatial distance for proton mass transfer. These features enable PtSA-ZIS photocatalyst to produce acetaldehyde with a selectivity of ≈100%, which will spontaneously transform into 1,1-diethoxyethane via acetalization to avoid volatilization. Meanwhile, a remarkable H2 evolution rate (184.4 µmol h-1) is achieved with a high apparent quantum efficiency of 10.50% at 400 nm.

A bioetching-induced visualized-organic photoelectrochemical transistor dual-signal mode sensor for alkaline phosphatase detection

A study of an integrated OPECT biosensor gate and the EC color-changing region on the same chip was carried out, achieving sensitive detection through bioetching-induced signal changes. Enzymatic bioetching enables specific alkaline phosphatase (ALP) detection by catalyzing the production of CdS, which modulates the channel current and generates a visual signal.

Construction of n-type homogeneous to improve interfacial carrier transfer for enhanced photoelectrocatalytic hydrolysis

Photoelectrocatalyzed hydrogen production plays an important role in the path to carbon neutrality. The construction of heterojunctions provides an ideal example of an oxygen precipitation reaction. In this work, the performance of the n-n type heterojunction CeBTC@FeBTC/NIF in the photoelectronically coupled catalytic oxygen evolution reaction (OER) reaction is presented. The efficient transfer of carriers between components enhances the catalytic activity. Besides, the construction of heterojunctions optimizes the energy level structure and increases the absorption of light, and the microstructure forms holes with a blackbody effect that also enhances light absorption. Consequently, CeBTC@FeBTC/NIF has excellent photoelectric coupling catalytic properties and requires an overpotential of only 300 mV to drive a current density of 100 mA cm-2 under illumination. More importantly, the n-n heterojunction was found to be effective in enhancing charge and photogenerated electron migration by examining the carrier density of each component and carrier diffusion at the interface.

Ultra-high photoelectric conversion efficiency and obvious carrier separation in photovoltaic ZnIn2X4 (X = S, Se, and Te) van der Waals heterostructures

The need for low-carbon solar electricity production has become increasingly urgent for energy security and climate change mitigation. However, the bandgap and carrier separation critical requirements of high-efficiency solar cells are difficult to satisfy simultaneously in a single material. In this work, several van der Waals ZnIn2X4 (X = S, Se, and Te) heterostructures were designed based on density functional theory. Our results suggest that both ZnIn2S4/ZnIn2Se4 and ZnIn2Se4/ZnIn2Te4 heterostructures are direct bandgap semiconductors at the Γ point. Besides, obvious carrier spatial separations were observed in the ZnIn2S4/ZnIn2Se4 and ZnIn2Se4/ZnIn2Te4 heterostructures. Interestingly, the ZnIn2S4/ZnIn2Se4 heterostructure has a suitable bandgap of 1.43 eV with good optical absorption in the visible light range. The calculated maximum theoretical photoelectric conversion efficiency of ZnIn2S4/ZnIn2Se4 heterostructure was 32.1%, and it can be further enhanced to 32.9% under 2% tensile strain. Compared to single-layer ZnIn2X4 materials, the electron effective mass of the ZnIn2S4/ZnIn2Se4 heterostructure is relatively low, which results in high electron mobility in the heterostructure. The suitable bandgap, obvious carrier separation, high electron mobility, and excellent theoretical photoelectric conversion efficiency of the ZnIn2S4/ZnIn2Se4 heterostructure make it a promising candidate for novel 2D-based photoelectronic devices and solar cells.

Gradient oxygen doping triggered a microscale built-in electric field in CdIn2S4 for photoelectrochemical water splitting

Construction of a built-in electric field has been identified as an attractive improvement strategy for photoelectrochemical (PEC) water splitting by facilitating the carrier extraction from the inside to the surface. However, the promotion effect of the electric field is still restrained by the confined built-in area. Herein, we construct a microscale built-in electric field via gradient oxygen doping. The octahedral configuration of the synthesized CdIn2S4 (CIS) provides a structural basis, which enables the subsequent oxygen doping to reach a depth of ∼100 nm. Accordingly, the oxygen-doped CIS (OCIS) photoanode exhibits a microscale built-in electric field with band bending. Excellent PEC catalytic activity with a photocurrent density of 3.69 mA cm-2 at 1.23 V vs. RHE is achieved by OCIS, which is 3.1 times higher than that of CIS. Combining the results of thorough characterization and theoretical calculations, accelerating migration and separation of charge carriers have been determined as the reasons for the improvement. Meanwhile, the recombination risk at the doping centers has also been reduced to the minimum via optimal experiments. This work provides a new-generation idea for constructing a built-in electric field from the view point of bulky configuration towards PEC water splitting.

Dual-defect semiconductor photocatalysts for solar-to-chemical conversion: advances and challenges

Among the renewable energy technologies to deal with increasing energy crisis and environmental concerns, solar-to-chemical conversion via photocatalysis holds great promise for sustainable energy supply. To date, a variety of modification strategies with different types of semiconducting materials have been proposed to boost photocatalytic efficiency. Recently, dual-defect semiconductor photocatalysts have emerged as an advantageous candidate with superior performance in improving photocatalytic activity compared to their defect-free or single-defect counterparts. In this review, focus is laid on the advances of dual-defect semiconductor photocatalysts for energy photocatalysis. Possible schemes for two different defects within a single semiconductor are firstly sorted based on the types of defects, and synthesis strategies to achieve various defect schemes as well as techniques to characterize different defects are then introduced. In particular, the effect of different defects on photocatalytic performance is emphasized, and the advances in dual-defect semiconductors for solar-to-chemical conversions are summarized based on different defect schemes. Finally, the future challenges and opportunities of dual-defect semiconductors for photocatalysis are discussed. This article is expected to provide an overall insight into existing dual-defect semiconductor photocatalysts and inspire the development of new defect-rich materials for photocatalytic energy production.

Large electronegativity differences between adjacent atomic sites activate and stabilize ZnIn2S4 for efficient photocatalytic overall water splitting

Photocatalytic overall water splitting into hydrogen and oxygen is desirable for long-term renewable, sustainable and clean fuel production on earth. Metal sulfides are considered as ideal hydrogen-evolved photocatalysts, but their component homogeneity and typical sulfur instability cause an inert oxygen production, which remains a huge obstacle to overall water-splitting. Here, a distortion-evoked cation-site oxygen doping of ZnIn2S4 (D-O-ZIS) creates significant electronegativity differences between adjacent atomic sites, with S1 sites being electron-rich and S2 sites being electron-deficient in the local structure of S1-S2-O sites. The strong charge redistribution character activates stable oxygen reactions at S2 sites and avoids the common issue of sulfur instability in metal sulfide photocatalysis, while S1 sites favor the adsorption/desorption of hydrogen. Consequently, an overall water-splitting reaction has been realized in D-O-ZIS with a remarkable solar-to-hydrogen conversion efficiency of 0.57%, accompanying a ~ 91% retention rate after 120 h photocatalytic test. In this work, we inspire an universal design from electronegativity differences perspective to activate and stabilize metal sulfide photocatalysts for efficient overall water-splitting.

Construction of core-shell CoSe2/ZnIn2S4 heterostructures for efficient visible-light-driven photocatalytic hydrogen evolution

The use of photocatalysts based on semiconductor heterostructures for hydrogen evolution is a prospective tactic for converting solar energy. Herein, visible-light-responsive three-dimensional core-shell CoSe2/ZnIn2S4 heterostructures were successfully fabricated via in situ growth of ZnIn2S4 ultrathin nanosheets on spherical CoSe2. Without any noble metal co-catalysts, the as-prepared CoSe2/ZnIn2S4 composite achieved attractive photocatalytic hydrogen evolution activity under visible light illumination. Optimal CoSe2/ZnIn2S4 achieved a hydrogen evolution rate of 2199 μmol g-1 h-1, which was 7 times higher than that of pristine ZnIn2S4 and even exceeded that of ZnIn2S4 loaded with platinum. In this distinctive core-shell heterostructure, the presence of CoSe2 could considerably improve the ability to harvest light, quicken the charge transfer kinetics, and avoid the agglomeration of ZnIn2S4 nanosheets. Meanwhile, the experimental results demonstrated that the strong interaction between CoSe2 and ZnIn2S4 at the compact interface could appropriately boost the photogenerated electron-hole pair migration and relieve charge recombination, thus improving photocatalytic hydrogen evolution activity. This work has bright prospects in constructing noble-metal-free core-shell heterostructures for solar energy conversion.

Ni(OH)2 surface-modified hierarchical ZnIn2S4 nanosheets: dual photocatalytic application and mechanistic insights

The simultaneous utilization of electrons and holes to couple photocatalytic H2 production with selective biomass transformation has attracted immense interest toward achieving sustainability in the fields of energy and chemical industry. In this study, by assembling highly dispersed Ni(OH)2 onto ZnIn2S4 (ZIS), efficient H2 evolution along with highly selective photocatalytic oxidation of furfuryl alcohol (FA) to furfural (FF) in pure water was achieved under anaerobic conditions. The H2 production and FA conversion rates over the optimal Ni-ZIS sample reached about 686 and 583 μmol g-1 h-1, respectively, about 4.9 and 1.7 folds as those of pure ZIS. Moreover, the formation of by-products with C-C coupling was dramatically suppressed over Ni-ZIS, resulting in higher selectivity for FF (97%), which is about 2.7-fold that of pure ZIS (36%). Deep mechanistic studies were conducted to reveal the structural evolution and cocatalyst effects of Ni(OH)2. This study not only offers a feasible paradigm for modifying the surface of catalysts to tune the photoactivity and selectivity for product-oriented alcohol oxidation coupled with efficient H2 production in water but also reveals the working mechanism of the deposited Ni(OH)2 over ZIS toward coupling reactions.

Fabrication of Co3O4@ZnIn2S4 for photocatalytic hydrogen evolution: Insights into the synergistic mechanism of photothermal effect and heterojunction

Integration of photothermal materials and photocatalysts can effectively improve photocatalytic hydrogen production. However, the synergistic mechanism of photothermal effect and heterojunction still need to be deeply investigated. Herein, Co3O4@ZnIn2S4 (ZIS) core-shell heterojunction was constructed as a photothermal/ photocatalytic integrated system for photocatalytic hydrogen production. The photothermal effect induced by Co3O4 boosts the surface reaction kinetic of hydrogen evolution with an apparent activation energy decrease from 42.0 kJ⋅mol-1 to 33.5 kJ⋅mol-1. The photothermal effect also increases the charge concentrations of Co3O4@ZIS, which ameliorates the conductivity of Co3O4@ZIS and thus benefits to charge transfer. In addition, a p-n junction forms between Co3O4 and ZIS and provides a built-in electric field to enhance charge separate and prolong charge life time. Benefiting from the synergy of photothermal effect and heterojunction, the photocatalytic performance of Co3O4@ZIS is significantly improved with a highest hydrogen evolution rate of 4515 μmol⋅g-1⋅h-1, which is about 3.5 times higher than that of pure ZIS. This work offers a full perspective to understand the photothermal/photocatalytic integrated conception for solar hydrogen production.

Efficient photocatalytic hydrogen production by space separation of photo-generated charges from S-scheme ZnIn2S4/ZnO heterojunction

ZnIn2S4/ZnO heterostructures have been achieved by a simple in-situ growth solvothermal method. Under full spectrum irradiation, the optimal photocatalyst 2ZnIn2S4/ZnO exhibits H2 evolution rate of 13,638 (water/ethanol = 1:1) and 3036 (water) μmol·g-1h-1, which is respectively 4 and 5 times higher than that of pure ZnIn2S4. In situ illumination X-ray photoelectron spectroscopy (ISI-XPS) analysis and density functional theory (DFT) calculations show that the electrons of ZnIn2S4 are removed to ZnO through hybridization and form an internal electric field between ZnIn2S4 and ZnO. The optical properties of the catalyst and the effect of internal electric field (IEF) can increase photo-generated electrons (e-)-holes (h+) transport rate and enhance light collection, resulting in profitable photocatalytic properties. The photoelectrochemical and EPR results show that a stepped (S-scheme) heterojunction is formed in the ZnIn2S4/ZnO redox center, which greatly promotes separation of e--h+ pairs and efficient H2 evolution. This research offers an effective method for constructing an efficient S-Scheme photocatalytic system for H2 evolution.

Designing Surface-Defect Engineering to Enhance the Solar-Driven Conversion of CO2 to C2 Products over Zn3In2S6/ZnS

The manipulation of electronic structure and prevention of photogenerated carriers from being quenched in bulk defects during the photocatalytic CO2 reduction reaction (CRR) have been effectively demonstrated through surface vacancy and defect engineering. In this work, the electronic structure on the surface of Zn3In2S6/ZnS (ZIS/ZnS) is significantly modified by the introduction and control of the surface S vacancies (SV) through Ar-plasma treatment. EPR and XPS analyses confirmed that SV was exclusively present on the ZIS/ZnS surface. The resulting ZIS/ZnS heterojunction photocatalysts demonstrate an impressive 46.6% selectivity toward C2 products even in the absence of cocatalysts. The mechanism of photocatalytic CRR is further elucidated through in situ analysis. Theoretical calculations demonstrate that the presence of In and Zn atoms adjacent to SV significantly enhances the adsorption of CO2 and facilitates C-C coupling.

Amorphization-Induced Cation Exchange in Indium Oxide Nanosheets for CO2-to-Ethanol Conversion

Cation exchange (CE) in metal oxides under mild conditions remains an imperative yet challenging goal to tailor their composition and enable practical applications. Herein, we first develop an amorphization-induced strategy to achieve room-temperature CE for universally synthesizing single-atom doped In2O3 nanosheets (NSs). Density functional theory (DFT) calculations elucidate that the abundant coordination-unsaturated sites present in a-In2O3 NSs are instrumental in surmounting the energy barriers of CE reactions. Empirically, a-In2O3 NSs as the host materials successfully undergo exchange with unary cations (Cu2+, Co2+, Mn2+, Ni2+), binary cations (Co2+Mn2+, Co2+Ni2+, Mn2+Ni2+), and ternary cations (Co2+Mn2+Ni2+). Impressively, high-loading single-atom doped (over 10 atom %) In2O3 NSs were obtained. Additionally, Cu/a-In2O3 NSs exhibit an excellent ethanol yield (798.7 μmol g-1 h-1) with a high selectivity of 99.5% for the CO2 photoreduction. This work offers a new approach to induce CE reactions in metal oxides under mild conditions and constructs scalable single-atom doped catalysts for critical applications.

Insight into the Fe atom-FeS cluster synergistic catalysis mechanism for the oxygen evolution reaction in NiS2-based electrocatalysts

The development of highly active oxygen evolution reaction (OER) catalysts with fast kinetics is crucial for the advancement of clean energy and fuel conversion to achieve a sustainable energy future. Recently, the synergistic effect of single-atom doping and multicomponent clusters has been demonstrated to significantly improve the catalytic activity of materials. However, such synergistic effects involving multi-electron and proton transfer processes are quite complex and many crucial mechanistic details need be well comprehended. We ingeniously propose a catalyst, (Fed-FeSc)@NiS2 (d stands for doping and c stands for clustering), with Fe and FeS acting synergistically on a NiS2 substrate. Specifically, fully dynamic monitoring of multiple active sites at the (Fed-FeSc)@NiS2 interface using metadynamics is innovatively performed. The results show that the rate determining step value at the overpotential of 1.23 V for the synergistic (Fed-FeSc)@NiS2 is 1.55 V, decreased by 6.67% and 35.29% compared to those of the independently acting single-atom doping and multi-clusters. The unique synergistic structure dramatically increases the d-band centre of the Fe site (-1.45 eV), endowing (Fed-FeSc)@NiS2 with more activity than conventional commercial Ir-C catalysts. This study provides insights into the synergistic effects of single-atom doping and multi-component clusters, leading to exploratory inspiration for the design of highly efficient OER catalysts.

A ZnIn2S4/Ag2CO3 Z-scheme heterostructure-based photoelectrochemical biosensor for neuron-specific enolase

An efficient photo-to-electrical signal is pivotal to photoelectrochemical (PEC) biosensors. In our work, a novel PEC biosensor was fabricated for the detection of neuron-specific enolase (NSE) based on a ZnIn2S4/Ag2CO3 Z-scheme heterostructure. Due to the overlapping band potentials of the ZnIn2S4 and Ag2CO3, the formed Z-scheme heterostructure can promote the charge separation and photoelectric conversion efficiency. And the concomitant Ag nanoparticles in Ag2CO3 provided multiple functions to enhance the PEC response of the Z-scheme heterostructure. It acts not only as a bridge for the transfer of carriers between ZnIn2S4 and Ag2CO3, promoting the constructed Z-scheme heterostructure, but also as electron mediators to accelerate the transfer of photogenerated carriers and improve the capture of visible light of the Z-scheme heterostructure by surface plasmon resonance (SPR). Compared with single Ag2CO3 and ZnIn2S4, the photocurrent of the designed Z-scheme heterostructure increased more than 20 and 60 times respectively. The fabricated PEC biosensor based on a ZnIn2S4/Ag2CO3 Z-scheme heterostructure exhibits sensitive detection to NSE, and presents a linear range of 50 fg·mL-1 ~ 200 ng·mL-1 with a limit of detection of 4.86 fg·mL-1. The proposed PEC biosensor provides a potential approach for clinical diagnosis.

Photoelectrochemical Engineering for Light-Assisted Rechargeable Metal Batteries: Mechanism, Development, and Future

Rechargeable battery devices with high energy density are highly demanded by  our  modern society. The use of metal anodes is extremely attractive for future rechargeable battery devices. However, the notorious metal dendritic and instability of solid electrolyte interface issues pose a series of challenges for metal anodes. Recently, considering the indigestible dynamical behavior of metal anodes, photoelectrochemical engineering of light-assisted metal anodes have been rapidly developed since they efficiently utilize the integration and synergy of oriented crystal engineering and photocatalysis engineering, which provided a potential way to unlock the interface electrochemical mechanism and deposition reaction kinetics of metal anodes. This review starts with the fundamentals of photoelectrochemical engineering and follows with the state-of-art advance of photoelectrochemical engineering for light-assisted rechargeable metal batteries where photoelectrode materials, working principles, types, and practical applications are explained. The last section summarizes the major challenges and some invigorating perspectives for future research on light-assisted rechargeable metal batteries.

Integrated Coupling Utilization of the Solar Full Spectrum for Promoting Water Splitting Activity over a CIZS Semiconductor

Most of the existing photocatalysts can only use ultraviolet light and part of visible light, so broadening the spectrum response range and realizing the full spectrum coverage are key measures to improve the solar-to-hydrogen (STH) efficiency of photocatalytic water splitting. A spatially separated photothermal coupled photocatalytic (PTC) reaction system was designed using carbonized melamine foam (C-MF) as a substrate to absorb visible and infrared light and Cu_0.04In_0.25ZnS_y@Ru (CIZS@Ru) as a photocatalyst to absorb UV-visible light (UV-vis). By comparing the three modes of bottom, liquid level, and self-floating, it is found that the surface temperature of the system has a significant effect on the hydrogen evolution activity. The monochromatic light and activation energy experiments verify that the enhancement of photocatalytic activity comes from the strengthened photothermal effect of the substrate. Combined with theoretical calculations, it is further confirmed that the introduction of photothermal materials provides additional kinetic energy for carrier transmission and promotes directional carrier transmission efficiency. Based on the photoenergy-thermal integrated catalytic strategy, the hydrogen production rate reaches 603 mmol h^-1 m^-2. The structural design of photocatalysis has potential application in the field of photoenergy-fuel conversion.

Facile Synthesis of P-Doped ZnIn2S4 with Enhanced Visible-Light-Driven Photocatalytic Hydrogen Production

ZnIn₂S₄ (ZIS) is widely used in the field of photocatalytic hydrogen production due to its unique photoelectric properties. Nonetheless, the photocatalytic performance of ZIS usually faces problems of poor conductivity and rapid recombination of charge carriers. Heteroatom doping is often regarded as one of the effective strategies for improving the catalytic activity of photocatalysts. Herein, phosphorus (P)-doped ZIS was prepared by hydrothermal method, whose photocatalytic hydrogen production performance and energy band structure were fully studied. The band gap of P-doped ZIS is about 2.51 eV, which is slightly smaller than that of pure ZIS. Moreover, due to the upward shift of its energy band, the reduction ability of P-doped ZIS is enhanced, and P-doped ZIS also exhibits stronger catalytic activity than pure ZIS. The optimized P-doped ZIS exhibits a hydrogen production rate of 1566.6 μmol g^-1 h^-1, which is 3.8 times that of the pristine ZIS (411.1 μmol g^-1 h^-1). This work provides a broad platform for the design and synthesis of phosphorus-doped sulfide-based photocatalysts for hydrogen evolution.

Sulfur vacancy and p-n junction synergistically boosting interfacial charge transfer and separation in ZnIn2S4/NiWO4 heterostructure for enhanced photocatalytic hydrogen evolution

Constructing a p-n heterojunction with vacancy is advantageous for speeding up carrier separation and migration due to the synergy of the built-in electric field and electron capture of the vacancy. Herein, a sulfur vacancy riched-ZnIn₂S₄/NiWO₄ p-n heterojunction (VZIS/NWO) photocatalyst was rationally designed and fabricated for photocatalytic hydrogen evolution. The composition and structure of VZIS/NWO were characterized. The existence of sulfur vacancy was confirmed through X-ray photoelectron spectroscopy, high-resolution transmission electron microscope, and electron paramagnetic resonance technology. The p-n heterojunction formed by ZnIn₂S₄ and NiWO₄ was proved to provide a convenient channel to boost interfacial charge migration and separation. By reducing the band gap, the vacancy engineer can improve light absorption as well as serve as an electron trap to improve photo-induced electron-hole separation. Benefiting from the synergy of p-n heterojunction and vacancy, the optimal VZIS/NWO-5 catalyst exhibits dramatically enhanced H₂ generation performance, which is about 10-fold that of the pristine ZnIn₂S₄. This work emphasizes the synergy between p-n heterojunction and sulfur vacancy for enhancing photocatalytic hydrogen evolution performance.

Enhancing Built-in Electric Fields for Efficient Photocatalytic Hydrogen Evolution by Encapsulating C60 Fullerene into Zirconium-Based Metal-Organic Frameworks

High-efficiency photocatalysts based on metal-organic frameworks (MOFs) are often limited by poor charge separation and slow charge-transfer kinetics. Herein, a novel MOF photocatalyst is successfully constructed by encapsulating C₆₀ into a nano-sized zirconium-based MOF, NU-901. By virtue of host-guest interactions and uneven charge distribution, a substantial electrostatic potential difference is set-up in C₆₀ @NU-901. The direct consequence is a robust built-in electric field, which tends to be 10.7 times higher in C₆₀ @NU-901 than that found in NU-901. In the catalyst, photogenerated charge carriers are efficiently separated and transported to the surface. For example, photocatalytic hydrogen evolution reaches 22.3 mmol g^-1  h^-1 for C₆₀ @NU-901, which is among the highest values for MOFs. Our concept of enhancing charge separation by harnessing host-guest interactions constitutes a promising strategy to design photocatalysts for efficient solar-to-chemical energy conversion.

Nb, Se-codoped ZnIn2S4/NbSe2composites with enhanced catalytic activity and photodegradation performance towards tetracycline

Low quantum efficiency and serious photogenerated carrier recombination have been urgent bottleneck problems for photocatalytic materials. Herein, we prepared Nb, Se-codoped ZnIn₂S₄/NbSe₂composites through a facile solvothermal method. The synergetic effect of codoping and cocatalyst was investigated on the photodegradation performance towards tetracycline under visible-light irradiation. By adjusting the final composition, the comprehensive characterization revealed that the optimum degradation efficiency of NS/ZIS-1.6 catalyst arrived at 75% in 70 min, which was 5.8 times higher than that of pure ZnIn₂S₄. Deep analysis indicated that the enhanced photocatalytic performance could be attributed to higher light absorption, more efficient electron/hole separation, faster charge transport, and lower carrier recombination. This work may offer novel viewpoint for design of high-performance catalysts towards the visible-light-driven photodegradation system.

Photoredox-Promoted Co-Production of Dihydroisoquinoline and H2 O2 over Defective Zn3 In2 S6

One of the most sustainable and promising approaches for hydrogen peroxide (H₂ O₂ ) production in a low-cost and environment-friendly way is photosynthesis, which, however, suffers from poor carrier utilization and low H₂ O₂ productivity. The addition of proton donors such as isopropanol or ethanol can increase H₂ O₂ production, which, unfortunately, will inevitably elevate the entire cost while wasting the oxidizing power of holes (h⁺ ). Herein, the tetrahydroisoquinolines (THIQs) is employed as a distinctive proton donor for the thermodynamically feasible and selective semi-dehydrogenation reaction to highly valuable dihydroisoquinolines (DHIQs), and meanwhile, to couple with and promote H₂ O₂ generation in one photoredox reaction under the photocatalysis by dual-functional Zn₃ In₂ S₆ photocatalyst. Surprisingly, the suitably defective Zn₃ In₂ S₆ offers an excellent and near-stoichiometric co-production performance of H₂ O₂ and DHIQs at unprecedentedly high rates of 66.4 and 62.1 mmol h^-1 g^-1 under visible light (λ ≥ 400 nm), respectively, which outperforms all the previously available reports even though sacrificial agents were employed in those reports. Additionally, photocatalytic redox reaction mechanism demonstrates that H₂ O₂ can be generated through multiple pathways, highlighting the synergistic effect among ROS (·O₂ ^- and ¹ O₂ ), h⁺ and proton donor, which has been ignored in previous studies.

One-step hydrothermal synthesis of rhombohedral ZnIn2S4 with high visible photocatalytic activity for aqueous pollutants removal

The phase composition of photocatalyst has a substantial effect on its photocatalytic activity. In this work, the rhombohedral phase ZnIn₂S₄ was synthesized by a one-step hydrothermal method by using inexpensive Na₂S as a sulfur source with the assistance of NaCl. The Na₂S as the S source can promote the generation of rhombohedral ZnIn₂S₄, and the addition of NaCl enhances the crystallinity of the as-prepared rhombohedral ZnIn₂S₄. The rhombohedral ZnIn₂S₄ nanosheets had a narrower energy gap, more negative conductive band potential, and higher separation efficiency of photogenerated carriers relative to the hexagonal ZnIn₂S₄. The as-synthesized rhombohedral ZnIn₂S₄ exhibited high visible photocatalytic activity with removal efficiencies of 96.7% in 80 min for the methyl orange, 86.3% in 120 min for ciprofloxacin hydrochloride and nearly 100% in 40 min for Cr(VI).

One Stone Two Birds: Utilization of Solar Light for Simultaneous Selective Phenylcarbinol Oxidation and H2 Production over 0D/2D-3D Pt/In2S3 Schottky Junction

Precise regulation and control solar-light-driven charges photoexcited on photocatalysts for separation-transfer and target redox reactions is an attractive and challenging pathway toward sustainability. Herein, 0D/2D-3D Pt/In2S3 Schottky junction was fabricated for simultaneous selective phenylcarbinol conversion into value-added aldehydes and production of clean energy H2 by directly utilizing photoexcited holes and electrons in one reaction system under mild reaction conditions. In contrast to pure water splitting and pure In2S3, the reaction thermodynamics and kinetics of H2 evolution on the Pt/In2S3 were significantly enhanced. The optimized 0.3% Pt/In2S3 exhibited the highest and most stable photocatalytic activity with 22.1 mmol g−1 h−1 of H2 production rate and almost 100% selectivity of benzaldehyde production. Notably, this dual-function photocatalysis also exhibited superiority in contrast to sacrificial-agent H2 evolution reactions such as lactic acid, Na2S, methanol and triethanolamine. The turnover frequency (TOF) could reach up to ~2394 h−1. The Pt clusters anchored at the electron location and strong metal-support interactions (SMSI) between Pt and In2S3 synergistically improved the spatial charge separation and directional transportation (~90.1% of the charge transport efficiency could be achieved over the Pt/In2S3 hybrid), and thus result in significant enhancement of photocatalytic H2 evolution with simultaneous benzaldehyde production.

Green and environmentally sustainable fabrication of SnS2 quantum dots/chitosan nanocomposite for enhanced photocatalytic performance: Effect of process variables, and water matrices

Concerns over the availability of clean water and the quality of treated wastewater are significant problems that call for an appropriate solution to improve the water quality. The present work emphasized the synthesis of novel SnS₂ quantum dots (QDs) deposited on chitosan via a facile green precipitation method involving neem (Azadirachta indica) leaf extract and investigating its photocatalytic performance for the degradation of Crystal violet (CV) dye under varying reaction parameters, other organic and inorganic salts and water matrices. The crystal structure, surface morphology, and elemental composition of the prepared SnS₂ (QDs)/Ch composite were evaluated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) and energy dispersive X-ray analysis (EDAX) techniques. The average size of SnS₂/Chitosan nanoparticles was calculated to be 8.8 nm using XRD, with the average diameter of SnS₂ QDs to be 3.3 nm from TEM. UV-visible spectroscopy was used to investigate its optical properties. The direct band gap of SnS₂/Chitosan estimated from Tauc's plot came to be 2.5 eV. The prepared novel SnS₂/Ch composite showed outstanding photocatalytic activity for the degradation of CV through the Advanced Oxidation Process (AOP). The fabricated photocatalyst caused 98.60 ± 1.34 % degradation of CV within a short period of 70 min under optimum conditions. The photodegradation reaction followed pseudo-first-order rate kinetics with a rate constant of 0.0815 min^-1. Furthermore, the photocatalyst showed high stability and was reusable for up to four cycles. The present work fulfils the aim of designing a novel, green, and efficient visible light-active nano-photocatalyst.

In situ fabrication of MIL-68(In)@ZnIn2S4 heterojunction for enhanced photocatalytic hydrogen production

Metal-organic frameworks (MOFs), as a class of semiconductor-like materials, are widely used in photocatalysis. However, the limited visible light absorption and poor charge separation efficiency are the main challenges restricting their photocatalytic performance. Herein, the type II heterojunction MIL-68(In)@ZIS was successfully fabricated by in situ growth of ZnIn₂S₄ (ZIS) on the surface of a representative MOF, i.e. MIL-68(In). After composition optimization, MIL-68(In)-20@ZIS shows an extraordinary photocatalytic hydrogen production efficiency of 9.09 mmol g^-1 h^-1 and good photochemical stability, which far exceeds those of most photocatalysts. The hierarchical loose structure of MIL-68(In)-20@ZIS is conducive to the adsorption of reactants and mass transfer. Meanwhile, a large number of tight 2D contact interfaces significantly reduce the obstruction of charge transfer, paving the way for high-perform photocatalytic hydrogen evolution. The experimental results demonstrate that the MIL-68(In)@ZIS heterojunction achieves intensive photoresponse and effective charge separation and transfer benefiting from unique charge transport paths of a type II heterojunction. This study opens an avenue toward MOF-based heterojunctions for solar energy conversion.

Interface Engineering in 2D/2D Heterogeneous Photocatalysts

Assembling different 2D nanomaterials into heterostructures with strong interfacial interactions presents a promising approach for novel artificial photocatalytic materials. Chemically implementing the 2D nanomaterials' construction/stacking modes to regulate different interfaces can extend their functionalities and achieve good performance. Herein, based on different fundamental principles and photochemical processes, multiple construction modes (e.g., face-to-face, edge-to-face, interface-to-face, edge-to-edge) are overviewed systematically with emphasis on the relationships between their interfacial characteristics (e.g., point, linear, planar), synthetic strategies (e.g., in situ growth, ex situ assembly), and enhanced applications to achieve precise regulation. Meanwhile, recent efforts for enhancing photocatalytic performances of 2D/2D heterostructures are summarized from the critical factors of enhancing visible light absorption, accelerating charge transfer/separation, and introducing novel active sites. Notably, the crucial roles of surface defects, cocatalysts, and surface modification for photocatalytic performance optimization of 2D/2D heterostructures are also discussed based on the synergistic effect of optimization engineering and heterogeneous interfaces. Finally, perspectives and challenges are proposed to emphasize future opportunities for expanding 2D/2D heterostructures for photocatalysis.

Surface Coordination of Pd/ZnIn2S4 toward Enhanced Photocatalytic Activity for Pyridine Denitrification

New surface coordination photocatalytic systems that are inspired by natural photosynthesis have significant potential to boost fuel denitrification. Despite this, the direct synthesis of efficient surface coordination photocatalysts remains a major challenge. Herein, it is verified that a coordination photocatalyst can be constructed by coupling Pd and CTAB-modified ZnIn₂S₄ semiconductors. The optimized Pd/ZnIn₂S₄ showed a superior degradation rate of 81% for fuel denitrification within 240 min, which was 2.25 times higher than that of ZnIn₂S₄. From the in situ FTIR and XPS spectra of 1% Pd/ZnIn₂S₄ before and after pyridine adsorption, we find that pyridine can be selectively adsorbed and form Zn⋅⋅⋅C-N or In⋅⋅⋅C-N on the surface of Pd/ZnIn₂S₄. Meanwhile, the superior electrical conductivity of Pd can be combined with ZnIn₂S₄ to promote photocatalytic denitrification. This work also explains the surface/interface coordination effect of metal/nanosheets at the molecular level, playing an important role in photocatalytic fuel denitrification.

Engineered 2D Metal Oxides for Photocatalysis as Environmental Remediation: A Theoretical Perspective

Modern-day society requires advanced technologies based on renewable and sustainable energy resources to meet environmental remediation challenges. Solar-inspired photocatalytic applications such as water splitting, hydrogen evolution reaction (HER), and carbon dioxide reduction reaction (CO2RR) are unique solutions based on green and efficient technologies. Considering the special electronic features and larger surface area, two-dimensional (2D) materials, especially metal oxides (MOs), have been broadly explored for the abovementioned applications in the past few years. However, their photocatalytic potential has not been optimized yet to the level required for practical and commercial applications. Among many strategies available, defect engineering, including cation and anion vacancy creations, can potentially boost the photocatalytic performance of 2D MOs. This mini-review covers recent advancements in 2D engineered materials for various photocatalysis applications such as H2O2 oxidation, HER, and CO2RR for environmental remediation from theoretical perspectives. By thoroughly addressing the fundamental aspects, recent developments, and associated challenges—the author’s recommendations in compliance with future challenges and prospects will pave the way for readers.

Unexpected High-Performance Photocatalytic Hydrogen Evolution in Co@NCNT@ZnIn2 S4 Triggered by Directional Charge Separation and Transfer

The structural design of photocatalysts is highly related to the separation and transfer of photogenerated carriers, which is essential for the improvement of photocatalytic hydrogen evolution performance. Here, the hybrid photocatalyst M@NCNT@ZIS (M: Fe, Co, Ni; NCNT: nitrogen-doped carbon nanotube; ZIS: ZnIn₂ S₄ ) with a hierarchical structure is rationally designed and precisely synthesized. The unique hollow structure with a large specific surface area offers abundant reactive sites, thus increasing the adsorption of reactants. Importantly, the properly positioned metal nanoparticles realize the directional charge migration from ZIS to M@NCNT, which significantly improves the efficiency of charge separation. Furthermore, the intimate interface between M@NCNT and ZIS effectively facilitates charge migration by shortening the transfer distance and providing numerous transport channels. As a result, the optimized Co@NCNT@ZIS exhibits a remarkable photocatalytic hydrogen evolution efficiency (43.73 mmol g^-1 h^-1 ) without Pt as cocatalyst. Experimental characterizations and density functional theory calculations demonstrate that the synergistic effect between hydrogen adsorption and interfacial charge transport is of great significance for improving photocatalytic hydrogen production performance.