Which Metals are Green for Catalysis? Comparison of the Toxicities of Ni, Cu, Fe, Pd, Pt, Rh, and Au Salts

Diversification of Pharmaceutical Manufacturing Processes: Taking the Plunge into the Non-PGM Catalyst Pool

Recent global events have led to the cost of platinum group metals (PGMs) reaching unprecedented heights. Many chemical companies are therefore starting to seriously consider and evaluate if and where they can substitute PGMs for non-PGMs in their catalytic processes. This review covers recent highly relevant applications of non-PGM catalysts in the modern pharmaceutical industry. By highlighting these selected successful examples of non-PGM-catalyzed processes from the literature, we hope to emphasize the enormous potential of non-PGM catalysis and inspire further development within this field to enable this technology to progress toward manufacturing processes. We also present some historical contexts and review the perceived advantages and challenges of implementing non-PGM catalysts in the pharmaceutical manufacturing environment.

Single Atom Catalyst in Persulfate Oxidation Reaction: From Atom Species to Substance

With maximum utilization of active metal sites, more and more researchers have reported using single atom catalysts (SACs) to activate persulfate (PS) for organic pollutants removal. In SACs, single metal atoms (Fe, Co, Cu, Mn, etc.) and different substrates (porous carbon, biochar, graphene oxide, carbon nitride, MOF, MoS2, and others) are the basic structural. Metal single atoms, substances, and connected chemical bonds all have a great influence on the electronic structures that directly affect the activation process of PS and degradation efficiency to organic pollutants. However, there are few relevant reviews about the interaction between metal single atoms and substances during PS activation process. In this review, the SACs with different metal species and substrates are summarized to investigate the metal-support interaction and evaluate their effects on PS oxidation reaction process. Furthermore, how metal atoms and substrates affect the reactive species and degradation pathways are also discussed. Finally, the challenges and prospects of SACs in PS-AOPs are proposed.

Room-Temperature Copper-Catalyzed Etherification of Aryl Bromides

We disclose the development of a Cu-catalyzed C-O coupling method utilizing a new N1,N2-diarylbenzene-1,2-diamine ligand, L8. Under optimized reaction conditions, structurally diverse aryl and heteroaryl bromides underwent efficient coupling with a variety of alcohols at room temperature using an L8-based catalyst. Notably, the L8-derived catalyst exhibited enhanced activity when compared to the L4-based system previously disclosed for C-N coupling, namely the ability to functionalize aryl bromides containing acidic functional groups. Mechanistic studies demonstrate that C-O coupling utilizing L8 ⋅ Cu involves rate-limiting alkoxide transmetallation, resulting in a mechanism of C-O bond formation that is distinct from previously described Pd-, Cu-, or Ni-based systems. This lower energy pathway leads to rapid C-O bond formation; a 7-fold increase relative to what is seen with other ligands. The results presented in this report overcome limitations in previously described C-O coupling methods and introduce a new ligand that we anticipate may be useful in other Cu-catalyzed C-heteroatom bond-forming reactions.

Ring-Opening Polymerization of Cyclohexene Oxide and Cycloaddition with CO2 Catalyzed by Amine Triphenolate Iron(III) Complexes

A series of novel amine triphenolate iron complexes were synthesized and characterized using UV, IR, elemental analysis, and high-resolution mass spectrometry. These complexes were applied to the ring-opening polymerization (ROP) of cyclohexene oxide (CHO), demonstrating excellent activity (TOF > 11050 h-1) in the absence of a co-catalyst. In addition, complex C1 maintained the dimer in the presence of the reaction substrate CHO, catalyzing the ring-opening polymerization of CHO to PCHO through bimetallic synergy. Furthermore, a two-component system consisting of iron complexes and TBAB displayed the ability to catalyze the reaction of CHO with CO2, resulting in the formation of cis-cyclic carbonate with high selectivity. Complex C4 exhibited the highest catalytic activity, achieving 80% conversion of CHO at a CHO/C4/TBAB molar ratio of 2000/1/8 and a CO2 pressure of 3 MPa for 16 h at 100 °C, while maintaining >99% selectivity of cis-cyclic carbonates, which demonstrated good conversion and selectivity.

Underpotential Deposition of 3D Transition Metals: Versatile Electrosynthesis of Single-Atom Catalysts on Oxidized Carbon Supports

Use of single-atom catalysts (SACs) has become a popular strategy for tuning activity and selectivity toward specific pathways. However, conventional SAC synthesis methods require high temperatures and pressures, complicated procedures, and expensive equipment. Recently, underpotential deposition (UPD) has been investigated as a promising alternative, yielding high-loading SAC electrodes under ambient conditions and within minutes. Yet only few studies have employed UPD to synthesize SACs, and all have been limited to UPD of Cu. In this work, a flexible UPD approach for synthesis of mono- and bi-metallic Cu, Fe, Co, and Ni SACs directly on oxidized, commercially available carbon electrodes is reported. The UPD mechanism is investigated using in situ X-ray absorption spectroscopy and, finally, the catalytic performance of a UPD-synthesized Co SAC is assessed for electrochemical nitrate reduction to ammonia. The findings expand upon the usefulness and versatility of UPD for SAC synthesis, with hopes of enabling future research toward realization of fast, reliable, and fully electrified SAC synthesis processes.

Sulfur in Waste-Free Sustainable Synthesis: Advancing Carbon-Carbon Coupling Techniques

This review explores the pivotal role of sulfur in advancing sustainable carbon-carbon (C-C) coupling reactions. The unique electronic properties of sulfur, as a soft Lewis base with significant mesomeric effect make it an excellent candidate for initiating radical transformations, directing C-H-activation, and facilitating cycloaddition and C-S bond dissociation reactions. These attributes are crucial for developing waste-free methodologies in green chemistry. Our mini-review is focused on existing sulfur-directed C-C coupling techniques, emphasizing their sustainability and comparing state-of-the-art methods with traditional approaches. The review highlights the importance of this research in addressing current challenges in organic synthesis and catalysis. The innovative use of sulfur in photocatalytic, electrochemical and metal-catalyzed processes not only exemplifies significant advancements in the field but also opens new avenues for environmentally friendly chemical processes. By focusing on atom economy and waste minimization, the analysis provides broad appeal and potential for future developments in sustainable organic chemistry.

Cross-Electrophile Coupling of Benzyl Halides and Disulfides Catalyzed by Iron

Cross-electrophile couplings are influential reactions that typically require a terminal reductant or photoredox conditions. We discovered an iron-catalyzed reaction that couples benzyl halides with disulfides to yield thioether products in the absence of a terminal reductant and under photoredox conditions. The disclosed platform proceeds without sulfur-induced catalyst poisoning or the use of an exogenous base, supporting a broad scope and circumventing undesired elimination pathways. We applied the developed chemistry in a new mode of disulfide bioconjugation, drug synthesis, gram-scale synthesis, and product derivatization. Lastly, we performed mechanistic experiments to better understand the stereoablative reaction between two electrophiles. Disulfides and benzylic thioethers are imperative for biological and pharmaceutical applications but remain severely understudied in comparison to their ethereal and amino counterparts. Hence, we expect this platform of iron catalysis and the downstream applications to be of interest to the greater scientific community.

Critical Review of Pd-Catalyzed Reduction Process for Treatment of Waterborne Pollutants

Catalyzed reduction processes have been recognized as important and supplementary technologies for water treatment, with the specific aims of resource recovery, enhancement of bio/chemical-treatability of persistent organic pollutants, and safe handling of oxygenate ions. Palladium (Pd) has been widely used as a catalyst/electrocatalyst in these reduction processes. However, due to the limited reserves and high cost of Pd, it is essential to gain a better understanding of the Pd-catalyzed decontamination process to design affordable and sustainable Pd catalysts. This review provides a systematic summary of recent advances in understanding Pd-catalyzed reductive decontamination processes and designing Pd-based nanocatalysts for the reductive treatment of water-borne pollutants, with special focus on the interactions and transformation mechanisms of pollutant molecules on Pd catalysts at the atomic scale. The discussion begins by examining the adsorption of pollutants onto Pd sites from a thermodynamic viewpoint. This is followed by an explanation of the molecular-level reaction mechanism, demonstrating how electron-donors participate in the reductive transformation of pollutants. Next, the influence of the Pd reactive site structure on catalytic performance is explored. Additionally, the process of Pd-catalyzed reduction in facilitating the oxidation of pollutants is briefly discussed. The longevity of Pd catalysts, a crucial factor in determining their practicality, is also examined. Finally, we argue for increased attention to mechanism study, as well as precise construction of Pd sites under batch synthesis conditions, and the use of Pd-based catalysts/electrocatalysts in the treatment of concentrated pollutants to facilitate resource recovery.

Coordination-induced bond weakening and small molecule activation by low-valent titanium complexes

Bond activation of small molecules through coordination to low valent metal complexes in M⋯X-H type interactions (where X = O, N, B, Si, etc.) leads to the formation of unusually weak X-H bonds and provides a powerful approach for the synthesis of target compounds under very mild conditions. Coordination of small molecules like water, amides, silanes, boranes, and dinitrogen to Ti(III) or Ti(II) complexes results in the synergetic redistribution of electrons between the metal orbitals and the ligand orbitals which weakens and enables the facile cleavage of the X-H or N-N bonds of the ligands. This review presents an overview of coordination-induced bond activation of small molecules by low valent titanium complexes. In particular, the applications of low valent titanium-induced bond weakening in nitrogen fixation are presented. The review concludes with potential future directions for work in this area including low-valent Ti-based PCET systems, photocatalytic nitrogen reduction, and approaches to tailoring complexes for optimal bond activation.

Toxicity of Metal Oxides, Dyes, and Dissolved Organic Matter in Water: Implications for the Environment and Human Health

This study delves into the critical issue of water pollution caused by the presence of metal oxides, synthetic dyes, and dissolved organic matter, shedding light on their potential ramifications for both the environment and human health. Metal oxides, ubiquitous in industrial processes and consumer products, are known to leach into water bodies, posing a significant threat to aquatic ecosystems. Additionally, synthetic dyes, extensively used in various industries, can persist in water systems and exhibit complex chemical behavior. This review provides a comprehensive examination of the toxicity associated with metal oxides, synthetic dyes, and dissolved organic matter in water systems. We delve into the sources and environmental fate of these contaminants, highlighting their prevalence in natural water bodies and wastewater effluents. The study highlights the multifaceted impacts of them on human health and aquatic ecosystems, encompassing effects on microbial communities, aquatic flora and fauna, and the overall ecological balance. The novelty of this review lies in its unique presentation, focusing on the toxicity of metal oxides, dyes, and dissolved organic matter. This approach aims to facilitate the accessibility of results for readers, providing a streamlined and clear understanding of the reported findings.

Evaluation of bottled drinking water and occurrence of multidrug-resistance and biofilm producing bacteria in Nepal

Health consequences arising from unsafe drinking water and water insecurity lead to increased reliance on usage of bottled water. Biofilm-producing antibiotic-resistant bacteria in bottled water may pose a risk to public health. This study aims to assess the quality of bottled drinking water with a focus on biofilm-producing and drug-resistant coliform. We analyzed 60 bottled water samples of 30 different brands purchased from Kathmandu for physicochemical and microbial analysis. The parameters pH, iron, total coliform count, Escherichia coli count, and fecal coliform count exceeded National Drinking Water Quality Standards, 2022 in 30.00%, 16.67%, 66.67%, 23.33%, and 16.67% of samples, respectively. Water quality index measurement showed 36.67% and 6.67% of bottled water samples were categorized as grade A and grade B indicating excellent and good water quality, respectively. However, 56.67% of bottled water samples fall under grade E meaning unsuitable for drinking. Among 14 coliform isolates, 85.71% and 14.29% were identified as E. coli and Klebsiella spp, respectively. The antibiotic susceptibility testing revealed that 28.57% of the isolates were multidrug-resistant and Gentamicin resistant isolates comprised 71.43%. However, none of the isolates were carbapenem (meropenem) resistant. In this study, 42.87% of the isolates were found biofilm producers with 14.29% each of strong, moderate, and weak biofilm producers. The genetic potential of biofilm-producing capacity of the isolates was assessed by Polymerase Chain Reaction amplification of bcsA and csgD genes. Our results showed that 66.67% and 50.00% of the isolates harbored bcsA and csgD genes, respectively. This study highlights potential public health hazards associated with the consumption of bottled water containing biofilm-producing and drug-resistant bacteria in Nepal.

Modern Organometallic C-H Functionalizations with Earth-Abundant Iron Catalysts: An Update

Iron-catalyzed C-H activation has recently emerged as an increasingly powerful synthetic method for the step- and atom- economical direct C-H functionalizations of otherwise inert C-H bonds. Iron's low-cost and toxicity along with its catalytic versatility have encouraged the scientific community to elect this metal for the development of new C-H activation methodologies. Within this review, we aim to present a collection of the most recent examples of iron-catalyzed C-H functionalizations with a particular emphasis on modern synthetic strategies and mechanistic aspects.

Heterogenization of molecular catalysts within porous solids: the case of Ni-catalyzed ethylene oligomerization from zeolites to metal-organic frameworks

The last decade has seen a tremendous expansion of the field of heterogenized molecular catalysis, especially with the growing interest in metal-organic frameworks and related porous hybrid solids. With successful achievements in the transfer from molecular homogeneous catalysis to heterogenized processes come the necessary discussions on methodologies used and a critical assessment on the advantages of heterogenizing molecular catalysis. Here we use the example of nickel-catalyzed ethylene oligomerization, a reaction of both fundamental and applied interest, to review heterogenization methodologies of well-defined molecular catalysts within porous solids while addressing the biases in the comparison between original molecular systems and heterogenized counterparts.

Inner- and Outer-Sphere Cross-Coupling of High Fsp3 Fragments

Natural product research originates from a desire to explore, understand, and perturb biological function with atomic precision. To reach these goals at all, let alone efficiently, requires thoughtful and creative problem solving. Often this means bold disconnections that would simplify access to complex structures, if only the methods existed to bridge these theoretical gaps. Whereas biological interrogations provide long-term intellectual value and impetus, methods come as attractive fringe benefits of natural product synthesis. This Account describes strategic, methodological solutions to the syntheses of natural products [(-)-eugenial C, Galbulimima alkaloids GB18, GB22, GB13, and himgaline] featuring new, convergent disconnections as important problem-solving steps, which themselves were inspired by recent methods that arose from our group. Each target required the invention of first-row transition metal-catalyzed cross-coupling procedures to satisfy the biological goals of the project. In these cases, synthetic strategy identified the methodological gap (the absence of stereo- and chemoselective couplings of appropriate fragments), but the tactical advantage conferred by first-row metals met the challenge. These methods were competent to handle the dense, sterically encumbered motifs common to natural products due to, in many cases, elementary steps that did not require bond formation between the hindered substrate and the metal center. Instead, these sterically lenient reactions appeared to involve metal-ligand-substrate reactions (i.e., outer-sphere steps), in contrast to the metal-substrate, coordinative reactions of precious metals (i.e., inner-sphere steps). Key observations from our previous studies, combined with the observations in seminal publications from other laboratories (Mattay, Weix, and MacMillan), led to the optimization of ligand-controlled, stereoselective reactions and the introduction of complementary catalytic cycles that revealed new modes of reactivity and generated novel structural motifs. Optimized access to bioactive natural product space accelerated our timeline of biological characterization, fulfilling a common premise of natural products research. The integration of methodology, complex natural product synthesis, diversification, and bioassay into a single Ph.D. dissertation would have been unmanageable in a prior era. The unique ability of first-row transition metals to effect Csp3-Csp3 cross-coupling with high chemo- and stereoselectivity has significantly lowered the barrier to reach the avowed goal of natural product synthesis and reduced the burden (real or perceived) of integrating natural products into functional campaigns.

Iron-Catalyzed para-Selective C-H Allylation of Aniline Derivatives

Transition-metal-catalyzed directed C-H allylation of arenes offers an efficient and straightforward approach to construct value-added allylic arenes. However, these reactions are often performed with precious transition-metal catalysts and mainly limited to ortho-C-H allylation of arenes. Herein, we disclose a novel iron-catalyzed para-C-H allylation of aniline derivatives with allyl alcohols via a chelation-induced strategy, providing various allylic arenes in good yields with excellent regio- and chemoselectivity. A simple FeCl3·6H2O is employed as a catalyst, serving a dual role in the reaction: (1) coordination with N-arylpicolinamide to alter the electronic property of the aromatic ring and (2) reaction with allyl alcohol to form allyl-Fe species.

FeIII -Based Eutectic Mixtures as Multi-task and Reusable Reaction Media for Efficient and Selective Conversion of Alkynes into Carbonyl Compounds

An efficient, simple and general protocol for the selective hydration of terminal alkynes into the corresponding methyl ketones has been developed by using a cheap, easy-to-synthesise and sustainable FeIII -based eutectic mixture [FeCl3  ⋅ 6H2 O/Gly (3 : 1)] as both promoter and solvent for the hydration reaction, working: i) under mild (45 °C) and bench-type reaction conditions (air); and ii) in the absence of ligands, co-catalysts, co-solvents or toxic, non-abundant and expensive noble transition metals (Au, Ru, Pd). When the final methyl ketones are solid/insoluble in the eutectic mixture, the hydration reaction takes place in 30 min, and the obtained methyl ketones can be isolated by simply decanting the liquid FeIII -DES, allowing the direct isolation of the desired ketones without VOC solvents. By using this straightforward and simple isolation protocol, we have been able to recycle the FeIII -based eutectic mixture system up to eight consecutive times. Furthermore, the FeIII -eutectic mixture is able to promote the selective and efficient formal oxidation of internal alkynes into 1,2-diketones, with the possibility of recycling this system up to three consecutive times. Preliminary investigations into a possible mechanism for the oxidation of the internal alkynes seem to indicate that it proceeds through the formation of the corresponding methyl ketones and α-chloroketones.

Triazole-Appended Glycohybrid/CuI-Catalyzed C-C Cross-Coupling of Aryl/Heteroaryl Halides with Alkynyl Sugars

This report describes a convenient method for the Cu(I)-catalyzed Sonogashira cross-coupling reaction of aryl/heteroaryl halides and alkynyl sugars in the presence of a 1,2,3-triazole-appended glycohybrid as a biocompatible ligand. The Sonogashira cross-coupling products were exclusively formed without the Glaser-Hay homocoupling reaction in the presence of a glycosyl monotriazolyl ligand at 120 °C. However, the Glaser-Hay homocoupling products were obtained at 60-70 °C in the presence of bis-triazolyl-based macrocyclic glycohybrid ligand L8. The glycosyl triazole ligands were synthesized via the CuI/DIPEA-mediated regioselective CuAAC click reaction, and a series of glycohybrids of glucose, mannose, and galactose alkynes including glycosyl rods were developed in good yields. The developed glycohybrids have been well characterized by various spectroscopic techniques, such as nuclear magnetic resonance, high-resolution mass spectrometry, and single-crystal X-ray data of L3. The protocol works well with the heteroaryl and naphthyl halides, and the mechanistic approach leads to CuI/ligand-assisted oxidative coupling. The coupling protocol has notable features, including low catalytic loading, cost-effectiveness, biocompatible nature, and a wide substrate scope.

Iron-Catalyzed Hydrobenzylation: Stereoselective Synthesis of (-)-Eugenial C

Metal-hydride hydrogen atom transfer (MHAT) has emerged as a useful tool to form quaternary carbons from alkenes via hydrofunctionalization. Methods to date that cross-couple alkenes with sp3 partners rely on heterobimetallic catalysis to merge the two cycles. Here, we report an iron-only cross-coupling via putative MHAT/SH2 steps that solves a key stereochemical problem in the synthesis of meroterpenoid eugenial C and obviates the need for nickel. The concise synthesis benefits from a conformationally locked o,o'-disubstituted benzyl bromide and a locally sourced chiral pool terpene coupling partner.

Virus Management Using Metal-Organic Framework-Based Technologies

The eradication and isolation of viruses are two concurrent approaches to protect ourselves from viral infections and diseases. The quite versatile porous materials called metal-organic frameworks (MOFs), have recently emerged as efficient nanosized tools to manage viruses, and several strategies to accomplish these tasks have been developed. This review describes these strategies employing nanoscale MOFs against SARS-CoV-2, HIV-1, tobacco mosaic virus, etc., which include the sequestration by host-guest penetration inside pores, mineralization, design of a physical barrier, controlled delivery of organic and inorganic antiviral drugs or bioinhibitors, photosensitization of singlet oxygen, and direct contact with inherently cytotoxic MOFs.

Triazole-enabled, iron-catalysed linear/branched selective C-H alkylations with alkenes

Iron-catalysed C-H alkylations with alkenes were achieved on benzamides by N-triazole assistance. A notable switch of the regioselectivity from linear to branched was observed depending on the nature of the olefin employed. The approach allowed for the synthesis of a family of decorated benzamides with ample scope and high levels of chemo-, regio- and site-selectivity.

Rational design of iron catalysts for C-X bond activation

We have quantum chemically studied the iron-mediated CX bond activation (X = H, Cl, CH₃ ) by d⁸ -FeL₄ complexes using relativistic density functional theory at ZORA-OPBE/TZ2P. We find that by either modulating the electronic effects of a generic iron-catalyst by a set of ligands, that is, CO, BF, PH₃ , BN(CH₃ )₂ , or by manipulating structural effects through the introduction of bidentate ligands, that is, PH₂ (CH₂ )_n PH₂ with n = 6-1, one can significantly decrease the reaction barrier for the CX bond activation. The combination of both tuning handles causes a decrease of the CH activation barrier from 10.4 to 4.6 kcal mol^-1 . Our activation strain and Kohn-Sham molecular orbital analyses reveal that the electronic tuning works via optimizing the catalyst-substrate interaction by introducing a strong second backdonation interaction (i.e., "ligand-assisted" interaction), while the mechanism for structural tuning is mainly caused by the reduction of the required activation strain because of the pre-distortion of the catalyst. In all, we present design principles for iron-based catalysts that mimic the favorable behavior of their well-known palladium analogs in the bond-activation step of cross-coupling reactions.

Bioorthogonal Functionalization of Material Surfaces with Bioactive Molecules

The functionalization of material surfaces with biologically active molecules is crucial for enabling technologies in life sciences, biotechnology, and medicine. However, achieving biocompatibility and bioorthogonality with current synthetic methods remains a challenge. We report herein a novel surface functionalization method that proceeds chemoselectively and without a free transition metal catalyst. In this method, a coating is first formed via the tyrosinase-catalyzed putative polymerization of a tetrazine-containing catecholamine (DOPA-Tet). One or more types of molecule of interest containing trans-cyclooctene are then grafted onto the coating via tetrazine ligation. The entire process proceeds under physiological conditions and is suitable for grafting bioactive molecules with diverse functions and structural complexities. Utilizing this method, we functionalized material surfaces with enzymes (alkaline phosphatase, glucose oxidase, and horseradish peroxidase), a cyclic peptide (cyclo[Arg-Gly-Asp-D-Phe-Lys], or c(RGDfK)), and an antibiotic (vancomycin). Colorimetric assays confirmed the maintenance of the biocatalytic activities of the grafted enzymes on the surface. We established the mammalian cytocompatibility of the functionalized materials with fibroblasts. Surface functionalization with c(RGDfK) showed improved fibroblast cell morphology and cytoskeletal organization. Microbiological studies with Staphylococcus aureus indicated that surfaces coated using DOPA-Tet inhibit the formation of biofilms. Vancomycin-grafted surfaces additionally display significant inhibition of planktonic S. aureus growth.

Variation of the toxicity caused by key contaminants in industrial wastewater along the treatment train of Fenton-activated sludge-advanced oxidation processes

Industrial wastewater contains a mixture of refractory and hazardous pollutants that have comprehensive toxic effects. We investigated the treatment of a long-chain industrial wastewater treatment train containing Fenton, biological anoxic/oxic (AO), and heterogeneous ozone catalytic oxidation (HOCO) processes, and evaluated their detoxification effect based on the analysis of the genic toxicity of some key contaminants. The results showed that although the effluent met the discharge standard in terms of traditional quality parameters, the long-chain treatment process could not effectively detoxify the industrial wastewater. The analysis results of summer samples showed that the Fenton process increased the total toxicity and genotoxicity of the organics, concerned metals, and non-volatile pollutants, whereas the A/O process increased the toxicity of the organics and non-volatile pollutants, and the HOCO process led to higher toxicity caused by metals and non-volatile pollutants. The outputs of the winter samples indicated that the Fenton process reduced the total toxicity and genotoxicity caused by non-volatile pollutants but increased that of the organics and concerned metals. The effect of the A/O process on the effluent toxicity in winter was the same as that in summer, whereas the HOCO process increased the total toxicity and genotoxicity of the metals in winter samples. Correlation analysis showed that various toxicity stresses were significantly correlated with the variation of these key pollutants in wastewater. Our results could provide a reference for the optimization of industrial wastewater treatment plants (IWTPs) by selecting more suitable treatment procedures to reduce the toxicity of different contaminants.

μ-Oxo-bis[(octacosafluoro-meso-tetraphenylporphyrinato)iron(iii)] - synthesis, crystal structure, and catalytic activity in oxidation reactions

We describe the synthesis and X-ray crystal structure of μ-oxo-bis[(octacosafluoro-meso-tetraphenylporphyrinato)iron(iii)] [(FeTPPF₂₈)₂O]. This novel iron complex is an efficient catalyst for oxidative biaryl coupling reactions of diarylamines and carbazoles. The asymmetric oxidative coupling in the presence of an axially chiral biaryl phosphoric acid as co-catalyst provides the 2,2'-bis(arylamino)-1,1'-biaryl in 96% ee. The Wacker-type oxidation of alkenes to the corresponding ketones with (FeTPPF₂₈)₂O as catalyst in the presence of phenylsilane proceeds at room temperature with air as the terminal oxidant. For internal and aliphatic alkenes increased ketone/alcohol product ratios were obtained.

Ligand-controlled regiodivergence in cobalt-catalyzed hydrosilylation of isoprene

An atom-economical, regiodivergent hydrosilylation reaction of isoprene was developed using an Earth-abundant cobalt catalyst through variation of ligands.

Remarkable Single Atom Catalyst of Transition Metal (Fe, Co & Ni) Doped on C2N Surface for Hydrogen Dissociation Reaction

Currently, hydrogen is recognized as the best alternative for fossil fuels because of its sustainable nature and environmentally friendly processing. In this study, hydrogen dissociation reaction is studied theoretically on the transition metal doped carbon nitride (C₂N) surface through single atom catalysis. Each TMs@C₂N complex is evaluated to obtain the most stable spin state for catalytic reaction. In addition, electronic properties (natural bond orbital NBO & frontier molecular orbital FMO) of the most stable spin state complex are further explored. During dissociation, hydrogen is primarily adsorbed on metal doped C₂N surface and then dissociated heterolytically between metal and nitrogen atom of C₂N surface. Results revealed that theFe@C₂N surface is the most suitable catalyst for H₂ dissociation reaction with activation barrier of 0.36 eV compared with Ni@C₂N (0.40 eV) and Co@C₂N (0.45 eV) complexes. The activation barrier for H₂ dissociation reaction is quite low in case of Fe@C₂N surface, which is comparatively better than already reported noble metal catalysts.

Cytotoxic sub-nanometer aqueous platinum clusters as potential antitumoral agents

Ligand-free sub-nanometer metal clusters (MCs) of Pt, Ir, Rh, Au and Cu, are prepared here in neat water and used as extremely active (nM) antitumoral agents for HeLa and A2870 cells. The preparation just consists of adding the biocompatible polymer ethylene-vinyl alcohol (EVOH) to an aqueous solution of the corresponding metal salt, to give liters of a MC solution after filtration of the polymer. Since the MC solution is composed of just neat metal atoms and water, the intrinsic antitumoral activity of the different sub-nanometer metal clusters can now fairly be evaluated. Pt clusters show an IC₅₀ of 0.48 μM for HeLa and A2870 cancer cells, 23 times higher than that of cisplatin and 1000 times higher than that of Pt NPs, and this extremely high cytotoxicity also occurs for cisplatin-resistant (A2870 cis) cells, with a resistance factor of 1.4 (IC₅₀ = 0.68 μM). Rh and Ir clusters showed an IC₅₀ ∼ 1 μM. Combined experimental and computational studies support an enhanced internalization and cytotoxic activation.

Sustainable synthesis of biomass-derived carbon quantum dots and their catalytic application for the assessment of α,β-unsaturated compounds

Herein, we demonstrate a simple, reproducible, and environment-friendly strategy for the synthesis of carbon quantum dots (CQDs) utilizing the mango (Mangifera indica) kernel as a renewable green carbon source. Various analytical tools characterized the as-prepared CQDs. These fluorescent CQDs showed significant water solubility with a uniform size of about 6 nm. The as-synthesized CQDs show significantly enhanced catalytic activity for the production of α,β-unsaturated compounds from the derivatives of aromatic alkynes and aldehydes under microwave irradiation in aqueous media. A potential mechanistic pathway and role of carboxylic functionalities were also revealed via various control experiments. The protocol shows outstanding selectivity towards the assessment of α,β-unsaturated compounds over other possible products. A comparative evaluation suggested the as-synthesized CQDs show higher catalytic activity under microwave radiation as compared to the conventional ways. These recyclable CQDs represent a sustainable alternative to metals in synthetic organic chemistry. A cleaner reaction profile, low catalyst loading, economic viability and recyclability of the catalyst, atom economy, and comprehensive substrate applicability are additional benefits of the current protocol according to green chemistry.

Sustainable conversion of saturated adsorbents (SAs) from wastewater into value-added products: future prospects and challenges with toxic per- and poly-fluoroalkyl substances (PFAS)

Following circular economy principles, the reuse or recycling of saturated adsorbents (SAs or adsorbate-laden adsorbents) into a low-cost engineered product is a valuable alternative to eliminate secondary pollution after adsorption. This review evaluates the application of SAs for the generation of products that can serve as (i) antimicrobial agents or disinfectants, (ii) materials for civil construction, (iii) catalysts, (iv) fertilizers, and (v) secondary adsorbents. The importance of SAs configuration in terms of functional groups, surface area and pore morphology played a crucial role in their reutilization. The SAs-laden silver ions (Ag⁺) strongly inhibit (~ 99%) the growth of Escherichia coli and Staphylococcus aureus microbes found in drinking and wastewaters. The intra-solidification of SAs containing toxic metal pollutants (As³⁺ and F^-) with cementitious materials can effectively reduce their leaching below permissible limits of USEPA standards for their utility as additives in construction work. The existence of transition metal ions (Cu²⁺, Cr^3+/6+, Ni²⁺) on the surface of SAs boosted activity and selectivity towards the desired product during catalytic oxidation, degradation, and conversion processes. The thermally recycled SAs can assist in the secondary adsorption of pollutants from another waste solution due to a larger surface area (> 1000 m²g^-1). However, there are chances that the SAs discussed above will contain traces of PFAS. The article summarizes the challenges, performance efficacy, and future prospects at the end of each value-added product. We also highlight critical challenges for managing PFAS-laden SAs and stimulate new perspectives to minimize PFAS in air, water, and soils.

Alkali halides as nucleophilic reagent sources for N-directed palladium-catalysed ortho-C-H halogenation of s-tetrazines and other heteroaromatics

A general palladium-catalysed selective C-H halogenation reaction is reported, which was successfully achieved for a large variety of functionalized aromatic rings incorporating diverse N-directing groups. By using simple alkali halides of MX type as the nucleophilic reagent source (M = Li, Na, K, Cs and X = I, Br and Cl), and phenyliodanediacetate oxidant, clean C-H-iodination, bromination and chlorination reactions were performed. This general protocol of selective ortho-monohalogenation, which complements but contrasts with the classical methods using electrophilic reagents, is achievable in a short time (30 min) with microwave irradiation assistance. The reaction was extended to substrates bearing N-directing pyridine, pyrimidine, pyrazole, oxazoline, naphtho[1,2-d]thiazole, and azobenzene groups. Notably, the topical and selectivity-challenging s-tetrazine, as a nitrogen-rich heteroaromatic, was successfully halogenated by this protocol.

Metal-Polymer Nanoconjugates Application in Cancer Imaging and Therapy

Metallic-based nanoparticles present a unique set of physicochemical properties that support their application in different fields, such as electronics, medical diagnostics, and therapeutics. Particularly, in cancer therapy, the plasmonic resonance, magnetic behavior, X-ray attenuation, and radical oxygen species generation capacity displayed by metallic nanoparticles make them highly promising theragnostic solutions. Nevertheless, metallic-based nanoparticles are often associated with some toxicological issues, lack of colloidal stability, and establishment of off-target interactions. Therefore, researchers have been exploiting the combination of metallic nanoparticles with other materials, inorganic (e.g., silica) and/or organic (e.g., polymers). In terms of biological performance, metal-polymer conjugation can be advantageous for improving biocompatibility, colloidal stability, and tumor specificity. In this review, the application of metallic-polymer nanoconjugates/nanohybrids as a multifunctional all-in-one solution for cancer therapy will be summarized, focusing on the physicochemical properties that make metallic nanomaterials capable of acting as imaging and/or therapeutic agents. Then, an overview of the main advantages of metal-polymer conjugation as well as the most common structural arrangements will be provided. Moreover, the application of metallic-polymer nanoconjugates/nanohybrids made of gold, iron, copper, and other metals in cancer therapy will be discussed, in addition to an outlook of the current solution in clinical trials.

Adsorption of Polycyclic Aromatic Hydrocarbons and C60 onto Forsterite: C-H Bond Activation by the Schottky Vacancy

Understanding how to catalytically break the C-H bond of aromatic molecules, such as polycyclic aromatic hydrocarbons (PAHs), is currently a big challenge and a subject of study in catalysis, astrochemistry, and planetary science. In the latter, the study of the breakdown reaction of PAHs on mineral surfaces is important to understand if PAHs are linked to prebiotic molecules in regions of star and planet formation. In this work, we employed a periodic density functional theory along with Grimme's D4 (DFT-D4) approach for studying the adsorption of a sample of PAHs (naphthalene, anthracene, fluoranthene, pyrene, coronene, and benzocoronene) and fullerene on the [010] forsterite surface and its defective surfaces (Fe-doped and Ni-doped surfaces and a MgO-Schottky vacancy) for their implications in catalysis and astrochemistry. On the basis of structural and binding energy analysis, large PAHs and fullerene present stronger adsorption on the pristine, Fe-doped, and Ni-doped forsterite surfaces than small PAHs. On a MgO-Schottky vacancy, parallel adsorption of the PAH leads to the chemisorption process (C-Si and/or C-O bonds), whereas perpendicular orientation of the PAH leads to the catalytic breaking of the aromatic C-H bond via a barrierless reaction. Spin density and charge analysis show that C-H dissociation is promoted by electron donation from the vacancy to the PAH. As a result of the undercoordinated Si and O atoms, the vacancy acts as a Frustrated Lewis Pair (FLP) catalyst. Therefore, a MgO-Schottky vacancy [010] forsterite surface proved to have potential catalytic activity for the activation of C-H bond in aromatic molecules.

Chemoenzymatic Oxosulfonylation-Bioreduction Sequence for the Stereoselective Synthesis of β-Hydroxy Sulfones

A series of optically active β-hydroxy sulfones has been obtained through an oxosulfonylation-stereoselective reduction sequence in aqueous medium. Firstly, β-keto sulfones were synthesized from arylacetylenes and sodium sulfinates to subsequently develop the carbonyl reduction in a highly selective fashion using alcohol dehydrogenases as biocatalysts. Optimization of the chemical oxosulfonylation reaction was investigated, finding inexpensive iron(III) chloride hexahydrate (FeCl₃  ⋅ 6H₂ O) as the catalyst of choice. The selection of isopropanol in the alcohol-water media resulted in high compatibility with the enzymatic process for enzyme cofactor recycling purposes, providing a straightforward access to both (R)- and (S)-β-hydroxy sulfones. The practical usefulness of this transformation was illustrated by describing the synthesis of a chiral intermediate of Apremilast. Interestingly, the development of a chemoenzymatic cascade approach avoided the isolation of β-keto sulfone intermediates, which allowed the preparation of chiral β-hydroxy sulfones in high conversion values (83-94 %) and excellent optical purities (94 to >99 % ee).