Ladder‐type Heteroarenes: Up to 15 Rings with Five Imide Groups

Conjugated backbone optimization of an all-fused-ring acceptor for efficient and stable organic solar cells

Three all-fused-ring acceptors with different conjugated backbone are designed as acceptor materials for organic solar cells. It is found that the horizontally extended conjugation of all-fused-ring acceptors leads to better photovoltaic performance compared to the vertically extended analogue. The results provide a guideline for designing high-performance and stable all-fused-ring acceptor materials.

Dipyridyl-Fused Quinoxalineimide (DPQI): A Strong Electron-Withdrawing Building Block for n-Type Polymer Semiconductors

Exploration of new electron-withdrawing building blocks plays a key role in the development of n-type organic semiconductors. Herein, a strong electron-withdrawing building block, dipyridyl-fused quinoxalineimide (DPQI), was successfully designed and synthesized. Single-crystal structure reveals that DPQI molecule possesses a completely planar backbone, which is beneficial for charge transport. For comparison, dibenzo-fused quinoxalineimide (DBQI) was also synthesized. The frontier molecular orbital (FMO) energy levels downshift with the incorporation of nitrogen atoms onto the π-conjugated backbone of quinoxalineimide. Two acceptor-acceptor (or all-acceptor) polymers P(BTI-DBQI) and P(BTI-DPQI) based on DBQI and DPQI were synthesized, respectively. Two polymers exhibit deep lowest-unoccupied molecular orbital (LUMO) levels (~-3.5 eV). Additionally, P(BTI-DPQI) exhibits unipolar n-type charge transport with μe of 1.4×10-4  cm2  V-1  s-1 in the organic field-effect transistors (OFET), which render them highly attractive for developing n-type semiconductors device. This work demonstrates that DPQI is a promising building block for constructing n-type polymer semiconductors.

A tetrathienopyrrole-based ladder-type donor polymer for high-performance organic near-infrared cavity detectors

Organic semiconductors can afford detection at wavelengths beyond commercial silicon photodetectors. However, for each targeted near-infrared wavelength range, this requires individually optimized materials, which adds to the complexity and costs. Moreover, finding molecules with strong absorption beyond 1 μm that perform well in organic photodetectors remains a challenge. In microcavity devices, the detection window can be extended to wavelengths inaccessible for silicon without the need for new materials by adopting an intelligent design. Previous work has demonstrated the applicability of a dithienopyrrole-based donor polymer (PDTPQx) in such a cavity photodetector device, with a photoresponse up to 1200 nm. In this work, the π-conjugated backbone of the polymer is extended, affording higher hole mobility and better donor:acceptor intermixing. This leads to enhanced peak external quantum efficiencies up to 1450 nm. The (thermal noise limited) detectivities achieved with the PTTPQx polymer (1.07 × 1012 to 1.82 × 1010 Jones) are among the very best in the 900-1400 nm wavelength regime.

Semiconducting Polymers Based on Simple Electron-Deficient Cyanated trans-1,3-Butadienes for Organic Field-Effect Transistors

Developing high-performance but low-cost n-type polymers remains a significant challenge in the commercialization of organic field-effect transistors (OFETs). To achieve this objective, it is essential to design the key electron-deficient units with simple structures and facile preparation processes, which can facilitate the production of low-cost n-type polymers. Herein, by sequentially introducing fluorine and cyano functionalities onto trans-1,3-butadiene, we developed a series of structurally simple but highly electron-deficient building blocks, namely 1,4-dicyano-butadiene (CNDE), 3-fluoro-1,4-dicyano-butadiene (CNFDE), and 2,3-difluoro-1,4-dicyano-butadiene (CNDFDE), featuring a highly coplanar backbone and deep-positioned lowest unoccupied molecular orbital (LUMO) energy levels (-3.03-4.33 eV), which render them highly attractive for developing n-type semiconducting polymers. Notably, all these electron-deficient units can be easily accessed by a two-step high-yield synthetic procedure from low-cost raw materials, thus rendering them highly promising candidates for commercial applications. Upon polymerization with diketopyrrolopyrrole (DPP), three copolymers were developed that demonstrated unipolar n-type transport characteristics in OFETs with the highest electron mobility of >1 cm2  V-1  s-1 . Hence, CNDE, CNFDE, and CNDFDE represent a class of novel, simple, and efficient electron-deficient units for constructing low-cost n-type polymers, thereby providing valuable insight for OFET applications.

p-Type Conjugated Polymers Containing Electron-Deficient Pentacyclic Azepinedione

Bisthienoazepinedione (BTA) has been reported for constructing high-performing p-type conjugated polymers in organic electronics, but the ring extended version of BTA is not well explored. In this work, we report a new synthesis of a key building block to the ring expanded electron-deficient pentacyclic azepinedione (BTTA). Three copolymers of BTAA with benzodithiophene substituted by different side chains are prepared. These polymers exhibit similar energy levels and optical absorption in solution and solid state, while significant differences are revealed in their film morphologies and behavior in transistor and photovoltaic devices. The best-performing polymers in transistor devices contained alkylthienyl side chains on the BDT unit (pBDT-BTTA-2 and pBDT-BTTA-3) and demonstrated maximum saturation hole mobilities of 0.027 and 0.017 cm2 V-1 s-1. Blends of these polymers with PC71BM exhibited a best photovoltaic efficiency of 6.78% for pBDT-BTTA-3-based devices. Changing to a low band gap non-fullerene acceptor (BTP-eC9) resulted in improved efficiency of up to 13.5%. Our results are among the best device performances for BTA and BTTA-based p-type polymers and highlight the versatile applications of this electron-deficient BTTA unit.

An n-Type All-Fused-Ring Molecule with Photoresponse to 1000 nm for Highly Sensitive Near-Infrared Photodetector

Most of all-fused-ring π-conjugated molecules have wide or medium bandgap and show photo response in the visible range. In this work, an all-fused-ring n-type molecule, which exhibits an ultrasmall optical bandgap of 1.22 eV and strong near-infrared (NIR) absorption with an onset absorption wavelength of 1013 nm is reported. The molecule consists of 14 aromatic rings and has electron donor-acceptor characteristics. It exhibits excellent n-type properties with low-lying HOMO/LUMO energy levels of -5.48 eV/-3.95 eV and high electron mobility of 7.0 × 10^-4  cm²  V^-1  s^-1 . Most importantly, its thin film exhibits a low trap density of 5.55 × 10¹⁶  cm^-3 because of the fixed molecular conformation and consequently low conformation disorder. As a result, organic photodetector (OPD) based on the compound exhibits a remarkably low dark current density (J_d ) of 2.01 × 10^-10  A cm^-2 at 0 V. The device shows a shot-noise-limited specific detectivity (D_sh *) of exceeding 10¹³  Jones at 400-1000 nm wavelength region with a peak specific detectivity of 4.65 × 10¹³  Jones at 880 nm. This performance is among the best reported for self-powered NIR OPDs.

Near-Infrared Acceptors with Imide-Containing End Groups for Organic Solar Cells

Near-infrared electron acceptors for organic solar cells (OSCs) mostly contain electron-withdrawing 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC) end groups, which can be modified by but limited to phenyl, thienyl, and naphthyl units with halogenated, methyl, and methyloxy substitution. In this work, we employed an imide-containing unit to construct a new IC end group, based on which a series of new electron acceptors were synthesized. The strong electron-deficient nature of imide units enables the new acceptors to show efficient intramolecular charge transfer and hence red-shifted absorption spectra compared to their IC counterparts. These new electron acceptors were applied to OSCs, providing efficiencies of over 17% with a low voltage loss of 0.52 eV. These results demonstrate that the new imide-containing end groups are promising fragments for the construction of near-infrared electron acceptors for high-performance OSCs.

Recent Research Progress of Organic Small-Molecule Semiconductors with High Electron Mobilities

Organic electronics has made great progress in the past decades, which is inseparable from the innovative development of organic electronic devices and the diversity of organic semiconductor materials. It is worth mentioning that both of these great advances are inextricably linked to the development of organic high-performance semiconductor materials, especially the representative n-type organic small-molecule semiconductor materials with high electron mobilities. The n-type organic small molecules have the advantages of simple synthesis process, strong intermolecular stacking, tunable molecular structure, and easy to functionalize structures. Furthermore, the n-type semiconductor is a remarkable and important component for constructing complementary logic circuits and p-n heterojunction structures. Therefore, n-type organic semiconductors play an extremely important role in the field of organic electronic materials and are the basis for the industrialization of organic electronic functional devices. This review focuses on the modification strategies of organic small molecules with high electron mobility at molecular level, and discusses in detail the applications of n-type small-molecule semiconductor materials with high mobility in organic field-effect transistors, organic light-emitting transistors, organic photodetectors, and gas sensors.

Terminal Cyano-Functionalized Fused Bithiophene Imide Dimer-Based n-Type Small Molecular Semiconductors: Synthesis, Structure-Property Correlations, and Thermoelectric Performances

n-Doped small molecular organic thermoelectric materials (OTMs) hold advantages of high Seebeck coefficient and better performance reproducibility over their polymeric analogues; however, high-performance n-type small molecular OTMs are severely lacking. We report here a class of small molecular OTMs based on terminal cyanation of a bithiophene imide-based ladder-type heteroarene BTI2. It was found that the cyanation could effectively lower the lowest unoccupied molecular orbital (LUMO) level from -2.90 eV (BTI2) to -4.14 eV (BTI2-4CN) and thus lead to significantly improved n-doping efficiency. Additionally, terminal cyano-functionalization can maintain the close packing and efficient intermolecular charge transfer between these cyanated molecules, thus yielding high electron mobilities of up to 0.40 cm2 V-1 s-1. Benefiting from its low LUMO-enabled efficient n-doping and high electron mobility, an encouraging n-type electrical conductivity of 0.43 S cm-1 and power factor (PF) of 6.34 μW m-1 K-2 were achieved for tetracyanated BTI2-4CN, significantly outperforming those of its noncynated BTI2 (<10-7 S cm-1, PF undetectable) and dicyanated BTI2-2CN (0.24 S cm-1, 1.78 μW m-1 K-2). These results suggest the great potential of the terminal cyanation strategy of ladder-type heteroarenes for developing high-performance small molecular OTMs.

A New Dibenzoquinoxalineimide-Based Wide-Bandgap Polymer Donor for Polymer Solar Cells

The molecular design of a wide-bandgap polymer donor is critical to achieve high-performance organic photovoltaic devices. Herein, a new dibenzo-fused quinoxalineimide (BPQI) is successfully synthesized as an electron-deficient building block to construct donor–acceptor (D–A)-type polymers, namely P(BPQI-BDT) and P(BPQI-BDTT), using benzodithiophene and its derivative, which bears different side chains, as the copolymerization units. These two polymers are used as a donor, and the narrow bandgap (2,20-((2Z,20Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo [3,4-e]thieno[2,″30′:4′,50]thieno[20,30:4,5]pyrrolo[3,2g]thieno[20,30:4,5]thieno[3,2-b]indole-2,10 diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile) Y6 is used as an acceptor to fabricate bulk heterojunction polymer solar cell devices. Y6, as a non-fullerene receptor (NFA), has excellent electrochemical and optical properties, as well as a high efficiency of over 18%. The device, based on P(BPQI-BDTT):Y6, showed power conversion efficiencies (PCEs) of 6.31% with a J_SC of 17.09 mA cm⁻², an open-circuit voltage (V_OC) of 0.82 V, and an FF of 44.78%. This study demonstrates that dibenzo-fused quinoxalineimide is a promising building block for developing wide-bandgap polymer donors.

Polymer Acceptors for High-Performance All-Polymer Solar Cells

All-polymer solar cells (all-PSCs) have attracted considerable attention owing to their pronounced advantages of excellent mechanical flexibility/stretchability and greatly enhanced device stability as compared to other types of organic solar cells (OSCs). Thanks to the extensive research efforts dedicated to the development of polymer acceptors, all-PSCs have achieved remarkable improvement of photovoltaic performance, recently. This review summarizes the recent progress of polymer acceptors based on the key electron-deficient building blocks, which include bithiophene imide (BTI) derivatives, boron-nitrogen coordination bond (B←N)-incorporated (hetero)arenes, cyano-functionalized (hetero)arenes, and fused-ring electron acceptors (FREAs). In addition, single-component-based all-PSCs are also briefly discussed. The structure-property correlations of polymer acceptors are elaborated in detail. Finally, we offer our insights into the development of new electron-deficient building blocks with further optimized properties and the polymers built from them for efficient all-PSCs.

A class of electron-deficient units: fluorenone imide and its electron-withdrawing group-functionalized derivatives

Here, we report a class of new building blocks, namely, fluorenone imide (FOI) and its derivatives (FIEWGs), featuring excellent solubility, high planarity and low-lying LUMO energy levels.

A novel class of rigid-rod perylene diimides and isoindigo semiconducting polymers

Three novel rigid-rod semiconducting polymers containing fused electron-deficient PDI and IID units have been synthesized through aldol polymerization. Their unique opto-electronic properties have been investigated systematically.

Fused Bithiophene Imide Dimer-Based n-Type Polymers for High-Performance Organic Electrochemical Transistors

The development of n-type organic electrochemical transistors (OECTs) lags far behind their p-type counterparts. In order to address this dilemma, we report here two new fused bithiophene imide dimer (f-BTI2)-based n-type polymers with a branched methyl end-capped glycol side chain, which exhibit good solubility, low-lying LUMO energy levels, favorable polymer chain orientation, and efficient ion transport property, thus yielding a remarkable OECT electron mobility (μ_e ) of up to ≈10^-2  cm²  V^-1  s^-1 and volumetric capacitance (C*) as high as 443 F cm^-3 , simultaneously. As a result, the f-BTI2TEG-FT-based OECTs deliver a record-high maximum geometry-normalized transconductance of 4.60 S cm^-1 and a maximum μC* product of 15.2 F cm^-1  V^-1  s^-1 . The μC* figure of merit is more than one order of magnitude higher than that of the state-of-the-art n-type OECTs. The emergence of f-BTI2TEG-FT brings a new paradigm for developing high-performance n-type polymers for low-power OECT applications.

n-Type Organic and Polymeric Semiconductors Based on Bithiophene Imide Derivatives

ConspectusIn the last three decades, p-type (hole-transporting) organic and polymeric semiconductors have achieved great success in terms of materials diversity and device performance, while the development of n-type (electron-transporting) analogues greatly lags behind, which is limited by the scarcity of highly electron-deficient building blocks with compact geometry and good solubility. However, such n-type semiconductors are essential due to the existence of the p-n junction and a complementary metal oxide semiconductor (CMOS)-like circuit in organic electronic devices. Among various electron-deficient building blocks, imide-functionalized arenes, such as naphthalene diimide (NDI) and perylene diimide (PDI), have been proven to be the most promising ones for developing n-type organic and polymeric semiconductors. Nevertheless, phenyl-based NDI and PDI lead to sizable steric hindrance with neighboring (hetero)arenes and a high degree of backbone distortion in the resultant semiconductors, which greatly limits their microstructural ordering and charge transport. To attenuate the steric hindrance associated with NDI and PDI, a novel imide-functionalized heteroarene, bithiophene imide (BTI), was designed; however, the BTI-based semiconductors suffer from high-lying frontier molecular orbital (FMO) energy levels as a result of their electron-rich thiophene framework and monoimide group, which is detrimental to n-type performance.In this Account, we review a series of BTI derivatives developed via various strategies, including ring fusion, thiazole substitution, fluorination, cyanation, and chalcogen substitution, and elaborate the synthesis routes designed to overcome the synthesis challenges due to their high electron deficiency. After structural optimization, these BTI derivatives can not only retain the advantages of good solubility, a planar backbone, and small steric hindrance inherited from BTI but also have greatly suppressed FMO levels. These novel building blocks enable the construction of a great number of n-type organic and polymeric semiconductors, particularly acceptor-acceptor (or all-acceptor)-type polymers, with remarkable performance in various devices, including electron mobility (μ_e) of 3.71 cm² V^-1 s^-1 in organic thin-film transistors (OTFTs), a power conversion efficiency (PCE) of 15.2% in all-polymer solar cells (all-PSCs), a PCE of 20.8% in inverted perovskite solar cells (PVSCs), electrical conductivity (σ) of 0.34 S cm^-1 and a power factor (PF) of 1.52 μW m^-1 K^-2 in self-doped diradicals, and σ of 23.3 S cm^-1 and a PF of ∼10 μW m^-1 K^-2 in molecularly n-doped polymers, all of which are among the best values in each type of device. The structure-property-device performance correlations of these n-type semiconductors are elucidated. The design strategy and synthesis of these novel BTI derivatives provide important information for developing highly electron-deficient building blocks with optimized physicochemical properties. Finally, we offer our insights into the further development of BTI derivatives and semiconductors built from them.

Dithiophene-Fused Oxadiborepins and Azadiborepins: A New Class of Highly Fluorescent Heteroaromatics

Access to dithiophene-fused oxadiborepins and the first azadiborepins attained via a modular synthesis route are presented. The new compounds emit intense blue light, some of which demonstrate fluorescence quantum yields close to unity. Cyclic voltammetry (CV) revealed electrochemically reversible one-electron reduction processes. The weak aromatic character of the novel 1,2,7-azadiborepin ring is demonstrated with in-depth theoretical investigations using nucleus-independent chemical shift (NICS) scans and anisotropy of the induced current density (ACID) calculations.

Effective Synthesis of Ladder-type Oligo(p-aniline)s and Poly(p-aniline)s via Intramolecular SNAr Reaction

Symmetric ladder-type oligo(p-aniline)s and poly(p-aniline)s were successfully synthesized by an intramolecular ring closure in a highly efficient S_NAr reaction from oligo(p-phenylene)s and poly(p-phenylene)s with fluorine (F) and secondary amine (NH) groups. Unlike Cadogan ring closure, the newly designed cyclization reaction will not produce a mixture of symmetric and nonsymmetric structures. Moreover, the introduction of the F atom does not hinder Suzuki polymerization. The result indicates that preparing regular oligomers and polymers with a nitrogen bridge is possible.

A Solution Processable Dithioalkyl Dithienothiophene (DSDTT) Based Small Molecule and Its Blends for High Performance Organic Field Effect Transistors

The 3,5-dithiooctyl dithienothiophene based small molecular semiconductor DDTT-DSDTT (1), end functionalized with fused dithienothiophene (DTT) units, was synthesized and characterized for organic field effect transistors (OFET). The thermal, optical, electrochemical, and computed electronic structural properties of 1 were investigated and contrasted. The single crystal structure of 1 reveals the presence of intramolecular locks between S(alkyl)···S(thiophene), with a very short S-S distance of 3.10 Å, and a planar core. When measured in an OFET device compound 1 exhibits a hole mobility of 3.19 cm² V^-1 s^-1, when the semiconductor layer is processed by a solution-shearing deposition method and using environmentally acceptable anisole as the solvent. This is the highest value reported to date for an all-thiophene based molecular semiconductor. In addition, solution-processed small molecule/insulating polymer (1/PαMS) blend films and devices were investigated. Morphological analysis reveals a nanoscopic vertical phase separation with the PαMS layer preferentially contacting the dielectric and 1 located on top of the stack. The OFET based on the blend comprising 50% weight of 1 exhibits a hole mobility of 2.44 cm² V^-1 s^-1 and a very smaller threshold voltage shift under gate bias stress.

Cyano-Functionalized Bithiophene Imide-Based n-Type Polymer Semiconductors: Synthesis, Structure-Property Correlations, and Thermoelectric Performance

n-Type polymers with deep-positioned lowest unoccupied molecular orbital (LUMO) energy levels are essential for enabling n-type organic thin-film transistors (OTFTs) with high stability and n-type organic thermoelectrics (OTEs) with high doping efficiency and promising thermoelectric performance. Bithiophene imide (BTI) and its derivatives have been demonstrated as promising acceptor units for constructing high-performance n-type polymers. However, the electron-rich thiophene moiety in BTI leads to elevated LUMOs for the resultant polymers and hence limits their n-type performance and intrinsic stability. Herein, we addressed this issue by introducing strong electron-withdrawing cyano functionality on BTI and its derivatives. We have successfully overcome the synthetic challenges and developed a series of novel acceptor building blocks, CNI, CNTI, and CNDTI, which show substantially higher electron deficiencies than does BTI. On the basis of these novel building blocks, acceptor-acceptor type homopolymers and copolymers were successfully synthesized and featured greatly suppressed LUMOs (-3.64 to -4.11 eV) versus that (-3.48 eV) of the control polymer PBTI. Their deep-positioned LUMOs resulted in improved stability in OTFTs and more efficient n-doping in OTEs for the corresponding polymers with a highest electrical conductivity of 23.3 S cm^-1 and a power factor of ∼10 μW m^-1 K^-2. The conductivity and power factor are among the highest values reported for solution-processed molecularly n-doped polymers. The new CNI, CNTI, and CNDTI offer a remarkable platform for constructing n-type polymers, and this study demonstrates that cyano-functionalization of BTI is a very effective strategy for developing polymers with deep-lying LUMOs for high-performance n-type organic electronic devices.

Bis-acenaphthoquinone diimides with high electron deficiency and good coplanar conformation

A series of novel bis-acenaphthoquinone diimides featuring a highly electron-deficient bis-acenaphthoquinone core are facilely synthesized via Knoevenagel condensation reaction. The diimides show high electron deficiency and good coplanar conformation, together with one of them having a maximum electron mobility up to 0.038 cm2 V-1 s-1.

The Chemistry and Applications of Heteroisoindigo Units as Enabling Links for Semiconducting Materials

ConspectusBecause of their low-temperature processing properties and inherent mechanical flexibility, semiconducting materials are promising candidates for enabling flexible displays, renewable energy, biological sensors, and healthcare. Progress has been made in materials performance by developing judicious materials design strategies. For example, improvements in electron transport have required new electron-deficient aromatics. Among them, isoindigo (IID) is an important functional group utilized in conjugated aromatics, where the structure combines two sets of five-membered electron-withdrawing lactam rings, exhibiting enhanced solubility, excellent chemical and thermal stabilities, broad absorption, and intriguing electron affinity.In the past decade, researchers have mainly focused on IID-based materials. However, the effect of heteroatom modification of the IID core has rarely been systemically investigated. In conventional conjugated polymers, single bonds connect the monomers, leading to energetic disorder and torsion defects, while ladder-type polymers are often intractable because of their fused nature. In this regard, the molecular design of new π scaffolds based on IID is central to the development of high-performance semiconductor polymers. Especially, a complete refresh of molecular design strategies and novel conjugated polymers with unique structures are needed to circumvent the disadvantages of the conventional ladder-type polymers.In this Account, we systematically summarize our recent progress in the design, synthesis, and structure-property relationships of IID- and particularly hetero-IID-based functional materials. More specifically, starting with molecular engineering of hetero-IIDs with variable electronic effects, conjugation lengths, and numbers of heterorings, we discuss the effect of the heteroring on the absorption spectra and energy levels. Additionally, we investigate a series of electron-withdrawing substitution of IIDs and hetero-IIDs and their molecular self-assembly behavior and the device performance. Furthermore, we discuss a series of IID-bis(EDOT) copolymers with hydrophilic ethylene glycol side chains for accumulation-mode organic thin-film electrochemical transistors, in which the relationships among the molecular structure, operational stability, film morphology, and device performance were revealed. Compared with IID polymers, the HOMO levels and optical band gaps of the thiophene and thienothiophene IID copolymers markedly decrease, and these polymers exhibit ambipolar charge transport. When we further expanded the IID core to a thieno[3,2-b][1]benzothiophene isoindigo (TBTI) core, such as in TBTIT, bulk-heterojunction solar cells employing this polymer class as the electron donor achieved good efficiency for additive- and annealing-free device conditions. When we introduced electron-deficient pyridine on the IID core, both the LUMO and HOMO energy levels of the copolymers markedly decreased, which significantly improved the electron mobility. In addition, we compare the correlation between the polymer structures of IID and hetero-IID copolymers with thiophene and benzothiophene as comonomers and their absorption spectra and energy levels. In particular, we evaluate the planarity and the dihedral angle between the repeat units, with systematic analysis by theoretical calculations to support our design concepts. We discuss polymer designs arising from simple aldol condensation, where the rigid backbone conformation has been locked by the double bonds. Our polymers display broad absorption from the visible to the NIR-II region, and more importantly, the high electron affinities of these polymers provide a platform to realize ambient-stable electron transport in solution-processed organic thin-film transistors. These exciting results are expected to open doors to new horizons of semiconducting materials in terms of other charming applications and the design and synthesis of superior materials.

Progress in the synthesis of imide-based N-type polymer semiconductor materials

Based on the development situation and challenge of organic photovoltaics (OPVs) and organic field-effect transistors (OFETs), it is necessary to develop N-type polymer building blocks with specific structures and performance. After decades of development, some excellent polymer receptor building blocks have been developed to construct N-type organic semiconductors, which have been applied in OFETs and OPVs. In this paper, four kinds of imide (bisthiophene imide BTI, bisthiazolimide BTz, naphthalimide NDI, and perylene imide PDI)-based N-type polymer semiconductor materials are introduced, and their applications in OFETs and OPVs are analyzed, too. The molecular structure design and the performance of corresponding materials are summarized to provide further guidance and reference for the design and development of high performance N-type polymer semiconductors.

Representative molecular structures of four N-type polymer semiconductors materials (a: N2000; b: PPDI-DTT, c: TBDI-DT and d: PDTzTIT) based on NDI, PDI, BTI and BTzI, respectively.

Untangling the Mechanochromic Properties of Benzothiadiazole-Based Luminescent Polymorphs through Supramolecular Organic Framework Topology

Two new luminophore polymorphs of 4-bromo-7-(4-nonylphenyl)benzo[c][1,2,5]thiadiazole (1α and 1β) exhibiting different color emissions, which switch into each other in response to shear force and solvent vapors, are presented and their X-ray structure is determined. Supramolecular organic framework topology (SOFT) studies on the two polymorphic structures led us to conclude that the mechanochromic phase transformation can be explained on the basis of modifications in their respective topological nets: mab and pcu for 1α and 1β, respectively, as a result of the breaking and restoration of a number of weak supramolecular interactions. The color changes accompanying this transformation have been rationalized with the help of time-dependent density functional theory. We firmly believe that our findings will inspire future research on the design of novel stimuli-responsive organic materials with switchable properties based on their supramolecular interactions by establishing clear SOFT-property relationships.

Thienoisoindigo (TII)-Based Quinoidal Small Molecules for High-Performance n-Type Organic Field Effect Transistors

A novel quinoidal thienoisoindigo (TII)-containing small molecule family with dicyanomethylene end-capping units and various alkyl chains is synthesized as n-type organic small molecules for solution-processable organic field effect transistors (OFETs). The molecular structure of the 2-hexyldecyl substituted derivative, TIIQ-b16, is determined via single-crystal X-ray diffraction and shows that the TIIQ core is planar and exhibits molecular layers stacked in a "face-to-face" arrangement with short core intermolecular distances of 3.28 Å. The very planar core structure, shortest intermolecular N···H distance (2.52 Å), existence of an intramolecular non-bonded contact between sulfur and oxygen atom (S···O) of 2.80 Å, and a very low-lying LUMO energy level of -4.16 eV suggest that TIIQ molecules should be electron transporting semiconductors. The physical, thermal, and electrochemical properties as well as OFET performance and thin film morphologies of these new TIIQs are systematically studied. Thus, air-processed TIIQ-b16 OFETs exhibit an electron mobility up to 2.54 cm2 V-1 s-1 with a current ON/OFF ratio of 105-106, which is the first demonstration of TII-based small molecules exhibiting unipolar electron transport characteristics and enhanced ambient stability. These results indicate that construction of quinoidal molecule from TII moiety is a successful approach to enhance n-type charge transport characteristics.

Narrow bandgap difluorobenzochalcogenadiazole-based polymers for high-performance organic thin-film transistors and polymer solar cells

A series of difluorobenzochalcogenadiazole-bithiophene copolymers are developed for high-performance organic semiconductors.

Fused Bithiophene Imide Oligomer and Diketopyrrolopyrrole Copolymers for n-Type Thin-Film Transistors

Diketopyrrolopyrrole (DPP)-based copolymers have received considerable attention as promising semiconducting materials for high-performance organic thin-film transistors (OTFTs). However, these polymers typically exhibit p-type or ambipolar charge-transporting characteristics in OTFTs due to their high-lying highest occupied molecular orbital (HOMO) energy levels. In this work, a new series of DPP-based n-type polymers have been developed by incorporating fused bithiophene imide oligomers (BTIn) into DPP polymers. The resulting copolymers BTIn-DPP show narrow band gaps as low as 1.27 eV and gradually down-shifted frontier molecular orbital energy levels upon the increment of imide group number. Benefiting from the coplanar backbone conformation, well-delocalized π-system, and favorable polymer chain packing, the optimal polymer in the series shows promising n-type charge transport with an electron mobility up to 0.48 cm² V^-1 s^-1 in OTFTs, which is among the highest values for the DPP-based n-type polymers reported to date. The results demonstrate that incorporating fused bithiophene imide oligomers into polymers can serve as a promising strategy for constructing high-performance n-type polymeric semiconductors.

Fluorine-Substituted Dithienylbenzodiimide-Based n-Type Polymer Semiconductors for Organic Thin-Film Transistors

Imide functionalization is one of the most effective approaches to develop electron-deficient building blocks for constructing n-type organic semiconductors. Driven by the attractive properties of imide-functionalized dithienylbenzodiimide (TBDI) and the promising device performance of TBDI-based polymers, a novel acceptor with increased electron affinity, fluorinated dithienylbenzodiimide (TFBDI), was designed with the hydrogen replaced by fluorine on the benzene core, and the synthetic challenges associated with this highly electron-deficient fluorinated imide building block are successfully overcome. TFBDI showed suppressed frontier molecular orbital energy levels as compared with TBDI. Copolymerizing this new electron-withdrawing TBDI with various donor co-units afforded a series of n-type polymer semiconductors TFBDI-T, TFBDI-Se, and TFBDI-BSe. All these TFBDI-based polymers exhibited a lower-lying lowest unoccupied molecular orbital (LUMO) energy level than the polymer analogue without fluorine. When applied in organic thin-film transistors, three polymers showed unipolar electron transport with large on-current/off-current ratios (I_on/I_off) of 10⁵-10⁷. Among them, the selenophene-based polymer TFBDI-Se with the deepest-positioned LUMO and optimal chain stacking exhibited the highest electron mobility of 0.30 cm² V^-1 s^-1. This result demonstrates that the new TFBDI is a highly attractive electron-deficient unit for enabling n-type polymer semiconductors, and the fluorination of imide-functionalized arenes offers an effective approach to develop more electron-deficient building blocks in organic electronics.

Rigid Coplanar Polymers for Stable n-Type Polymer Thermoelectrics

Low n-doping efficiency and inferior stability restrict the thermoelectric performance of n-type conjugated polymers, making their performance lag far behind of their p-type counterparts. Reported here are two rigid coplanar poly(p-phenylene vinylene) (PPV) derivatives, LPPV-1 and LPPV-2, which show nearly torsion-free backbones. The fused electron-deficient rigid structures endow the derivatives with less conformational disorder and low-lying lowest unoccupied molecular orbital (LUMO) levels, down to -4.49 eV. After doping, two polymers exhibited high n-doping efficiency and significantly improved air stability. LPPV-1 exhibited a high conductivity of up to 1.1 S cm^-1 and a power factor as high as 1.96 μW m^-1  K^-2 . Importantly, the power factor of the doped LPPV-1 thick film degraded only 2 % after 7 day exposure to air. This work demonstrates a new strategy for designing conjugated polymers, with planar backbones and low LUMO levels, towards high-performance and potentially air-stable n-type polymer thermoelectrics.

Conjugated Donor-Acceptor Terpolymers Toward High-Efficiency Polymer Solar Cells

The development of conjugated alternating donor-acceptor (D-A) copolymers with various electron-rich and electron-deficient units in polymer backbones has boosted the power conversion efficiency (PCE) over 17% for polymer solar cells (PSCs) over the past two decades. However, further enhancements in PCEs for PSCs are still imperative to compensate their imperfect stability for fulfilling practical applications. Meanwhile development of these alternating D-A copolymers is highly demanding in creative design and syntheses of novel D and/or A monomers. In this regard, when being possible to adopt an existing monomer unit as a third component from its libraries, either a D' unit or an A' moiety, to the parent D-A type polymer backbones to afford conjugated D-A terpolymers, it will give a facile and cost-effective method to improve their light absorption and tune energy levels and also interchain packing synergistically. Moreover, the rationally controlled stoichiometry for these components in such terpolymers also provides access for further fine-tuning these factors, thus resulting in high-performance PSCs. Herein, based on their unique features, the recent progress of conjugated D-A terpolymers for efficient PSCs is reviewed and it is discussed how these factors influence their photovoltaic performance, for providing useful guidelines to design new terpolymers toward high-efficiency PSCs.

Covalent and Noncovalent Approaches to Rigid Coplanar π-Conjugated Molecules and Macromolecules

Molecular conformation and rigidity are essential factors in determining the properties of individual molecules, the associated supramolecular assemblies, and bulk materials. This correlation is particularly important for π-conjugated molecular and macromolecular systems. Within such an individual molecule, a coplanar conformation facilitates the delocalization of not only molecular orbitals but also charges, excitons, and spins, leading to synergistically ensembled properties of the entire conjugated system. A rigid backbone, meanwhile, imposes a high energy cost to disrupt such a favorable conformation, ensuring the robustness and persistence of coplanarity. From a supramolecular and material point of view, coplanarity and rigidity often promote strong intermolecular electronic coupling and reduce the energy barrier for the intermolecular transport of charges, excitons, and phonons, affording advanced materials properties in bulk. In this context, pursuing a rigid and coplanar molecular conformation often represents one of the primary objectives when designing and synthesizing conjugated molecules for electronic and optical applications. Two general bottom-up strategies-covalent annulation and noncovalent conformational control-are often employed to construct rigid coplanar π systems. These strategies have afforded various classes of such molecules and macromolecules, including so-called conjugated ladder polymers, graphene nanoribbons, polyacenes, and conformationally locked organic semiconductors. While pursuing these targets, however, one often confronts challenges associated with precise synthesis and limited solubility of the rigid coplanar systems, which could further impede their large-scale preparation, characterization, processing, and application. To address these issues, we developed and utilized a number of synthetic methods and molecular engineering approaches to construct and to process rigid coplanar conjugated molecules and macromolecules. Structure-property correlations of this unique class of organic materials were established, providing important chemical principles for molecular design and materials applications. In this Account, we first describe our efforts to synthesize rigid coplanar π systems fused by various types of bonds, including kinetically formed covalent bonds, thermodynamically formed covalent bonds, N→B coordinate bonds, and hydrogen bonds, in order of increasing dynamic character. The subsequent section discusses the characteristic properties of selected examples of these rigid coplanar π systems in comparison with control compounds that are not rigid and coplanar, particularly focusing on the optical, electronic, and electrochemical properties. For systems bridged with noncovalent interactions, active manipulation of the dynamic bonds can tune variable properties at the molecular or collective level. Intermolecular interactions, solid-state packing, and processing of several cases are then discussed to lay the foundation for future materials applications of rigid coplanar π conjugated compounds.

High-Performance All-Polymer Solar Cells Enabled by an n-Type Polymer Based on a Fluorinated Imide-Functionalized Arene

A novel imide-functionalized arene, di(fluorothienyl)thienothiophene diimide (f-FBTI2), featuring a fused backbone functionalized with electron-withdrawing F atoms, is designed, and the synthetic challenges associated with highly electron-deficient fluorinated imide are overcome. The incorporation of f-FBTI2 into polymer affords a high-performance n-type semiconductor f-FBTI2-T, which shows a reduced bandgap and lower-lying lowest unoccupied molecular orbital (LUMO) energy level than the polymer analog without F or with F-functionalization on the donor moiety. These optoelectronic properties reflect the distinctive advantages of fluorination of electron-deficient acceptors, yielding "stronger acceptors," which are desirable for n-type polymers. When used as a polymer acceptor in all-polymer solar cells, an excellent power conversion efficiency of 8.1% is achieved without any solvent additive or thermal treatment, which is the highest value reported for all-polymer solar cells except well-studied naphthalene diimide and perylene diimide-based n-type polymers. In addition, the solar cells show an energy loss of 0.53 eV, the smallest value reported to date for all-polymer solar cells with efficiency > 8%. These results demonstrate that fluorination of imide-functionalized arenes offers an effective approach for developing new electron-deficient building blocks with improved optoelectronic properties, and the emergence of f-FBTI2 will change the scenario in terms of developing n-type polymers for high-performance all-polymer solar cells.

The chemical space of B, N-substituted polycyclic aromatic hydrocarbons: Combinatorial enumeration and high-throughput first-principles modeling

Combinatorial introduction of heteroatoms in the two-dimensional framework of aromatic hydrocarbons opens up possibilities to design compound libraries exhibiting desirable photovoltaic and photochemical properties. Exhaustive enumeration and first-principles characterization of this chemical space provide indispensable insights for rational compound design strategies. Here, for the smallest seventy-seven Kekulean-benzenoid polycyclic systems, we reveal combinatorial substitution of C atom pairs with the isosteric and isoelectronic B, N pairs to result in 7 453 041 547 842 (7.4 tera) unique molecules. We present comprehensive frequency distributions of this chemical space, analyze trends, and discuss a symmetry-controlled selectivity manifestable in synthesis product yield. Furthermore, by performing high-throughput ab initio density functional theory calculations of over thirty-three thousand (33k) representative molecules, we discuss quantitative trends in the structural stability and inter-property relationships across heteroarenes. Our results indicate a significant fraction of the 33k molecules to be electronically active in the 1.5-2.5 eV region, encompassing the most intense region of the solar spectrum, indicating their suitability as potential light-harvesting molecular components in photo-catalyzed solar cells.

A review of non-fullerene polymer solar cells: from device physics to morphology control

The rise in power conversion efficiency of organic photovoltaic (OPV) devices over the last few years has been driven by the emergence of new organic semiconductors and the growing understanding of morphological control at both the molecular and aggregation scales. Non-fullerene OPVs adopting p-type conjugated polymers as the donor and n-type small molecules as the acceptor have exhibited steady progress, outperforming PCBM-based solar cells and reaching efficiencies of over 15% in 2019. This review starts with a refreshed discussion of charge separation, recombination, and V _OC loss in non-fullerene OPVs, followed by a review of work undertaken to develop favorable molecular configurations required for high device performance. We summarize several key approaches that have been employed to tune the nanoscale morphology in non-fullerene photovoltaic blends, comparing them (where appropriate) to their PCBM-based counterparts. In particular, we discuss issues ranging from materials chemistry to solution processing and post-treatments, showing how this can lead to enhanced photovoltaic properties. Particular attention is given to the control of molecular configuration through solution processing, which can have a pronounced impact on the structure of the solid-state photoactive layer. Key challenges, including green solvent processing, stability and lifetime, burn-in, and thickness-dependence in non-fullerene OPVs are briefly discussed.