Manganese-Catalyzed Sustainable Synthesis of Pyrroles from Alcohols and Amino Alcohols

Terpenylation of Ketones and a Secondary Alcohol under Hydrogen-Borrowing Manganese Catalysis

An Earth-abundant Mn-PNP pincer complex-catalyzed terpenylation of cyclic and acyclic ketones and secondary alcohol 1-phenylethanol using isoprenoid derivatives prenol, nerol, phytol, solanesol, and E-farnesol as allyl surrogates is reported. The C-C coupling reactions are green and atom-economic, proceeding via dehydrogenation of alcohols following a hydrogen autotransfer methodology aided by metal-ligand cooperation.

Ligand Assisted Co(II)-Catalyzed Multicomponent Synthesis of Substituted Pyrroles and Pyridines

Herein, we describe a sustainable Co(II)-catalyzed synthesis of pyrroles and pyridines. Using a Co(II)-catalyst [CoII 2(La)2Cl2] (1 a) bearing redox-active 2-(phenyldiazenyl)-1,10-phenanthroline) (La) scaffold, various substituted pyrroles and pyridines were synthesized in good yields, taking alcohol as one of the primary feedstock. Pyrroles were synthesized by the equimolar reaction of 2-amino and secondary alcohols. A series of 2,4,6-substituted symmetrical pyridines were prepared via a three-component reaction of NH4OAc with 1 : 2.2 molar primary and secondary alcohols, respectively. Unsymmetrically substituted 2,4,6-trisubstituted, 2,4,5,6-tetrasubstituted, and 2,3,4,5,6-pentasubstituted pyridines were achieved via a multi-component coupling reaction of alcohols and NH4OAc. Catalyst 1 a showed encouraging results during the gram-scale synthesis of these N-heterocycles. Mechanistic investigation revealed synergistic involvement of cobalt metal and the ligand during the catalytic reactions.

Remote C-H bond cooperation strategy enabled silver catalyzed borrowing hydrogen reactions

Metal-ligand cooperation (MLC) is an essential strategy in transition metal catalysis. Traditional NH-based and OH-based MLC catalysts, as well as the later developed (de)aromatization strategy, have been widely applied in atom-economic borrowing hydrogen/hydrogen auto-transfer (BH/HA) reactions. However, these conventional MLC approaches are challenging for low-coordination and low-activity coinage metal complexes, arising from the instability during (de)protonation on the coordination atom, the constraint in linear coordination, and possible poisoning due to extra functional sites. Herein, we demonstrate a remote C-H bond cooperation strategy that enables the unprecedented homogeneous Ag(i)-catalyzed BH/HA reaction. The covalent C-H bifunctional site well facilitates (de)hydrogenation, especially under the low coordination circumstances of d10 Ag(i). The strong electron-donating bis-N-heterocyclic carbene (NHC) ligand stabilizes the silver-hydride and stimulates the hydride activity on the trans-position of ligands. Mechanistic studies implicate the plausible remote assistance of the dissociative NHC arm in facilitating BH/HA reactions. Our findings emphasize the potential of the remote C-H bond cooperation strategy for low coordination metals in catalyzing BH/HA reactions and broadening MLC catalysts to d10 coinage metals.

A Catalytic Version of the Knorr Pyrrole Synthesis Permits Access to Pyrroles and Pyridines

Aromatic N-heterocycles, such as pyrroles and pyridines, are important natural products and bulk and fine chemicals with numerous applications as active ingredients of pharmaceuticals and agrochemicals, as catalysts, and in materials sciences. We report here a catalytic version of the Knorr pyrrole synthesis in which simple and diversely available starting materials, such as 1,2-amino alcohols or 1,3-amino alcohols and keto esters, undergo a dehydrogenative coupling to form pyrroles and pyridines, respectively. Our reaction forms hydrogen as a collectible (and usable) byproduct and is mediated by a well-defined Mn catalyst. The synthesis of highly functionalized heterocycles and applications was demonstrated, and 35 compounds, not yet reported in the literature, were introduced.

Double dehydrogenative coupling of amino alcohols with primary alcohols under Mn(I) catalysis

Herein, we unveil a method for synthesizing substituted pyrrole and pyrazine compounds via a double dehydrogenative coupling of amino alcohols with primary alcohols, facilitated by Mn(I)-PNP catalysis, which uniquely enables the simultaneous formation of C-C and C-N bonds.

Cu(II)-Catalyzed Reaction of Ethynyl Methylene Cyclic Carbamates and Amines: Synthesis of Polysubstituted Pyrroles

A copper-catalyzed efficient, operationally simple, general method for straightforward syntheses of polysubstituted pyrroles employing ethynyl methylene cyclic carbamates as precursors reacting with commercially available amines was first reported. A wide variety of polysubstituted pyrroles were obtained in acceptable to good yields under mild conditions. This protocol features broad substrate scope, high functional group tolerance, and easy operation, therefore enabling late-stage functionalization and rapid synthesis of bioactive compounds, including structurally complex marketed drugs and natural products. In addition, a scale-up experiment further highlighted the synthetic utility.

Manganese-catalyzed oxidation of furfuryl alcohols and furfurals to efficient synthesis of furoic acids

Herein, the direct oxidation of furfuryl alcohols and furfurals to the corresponding furoic acids is performed highly efficiently with potassium hydroxide as the base in the presence of a catalytic amount of PNP pincer manganese catalyst in dioxane. The manganese catalytic system can not only achieve the dehydrogenation conversion of furfuryl alcohols to prepare furoic acids but can also achieve the synthesis of furoic acids from furfurals under more moderate conditions and with less reaction time. In addition, the bifunctional furfuryl alcohols or furfurals can also be efficiently converted into dicarboxylic acid products under optimal reaction conditions.

Divergent Synthesis of Pyrazoles via Manganese Pincer Complex Catalyzed Acceptorless Dehydrogenative Coupling Reactions

This report detailed the synthesis of multi-substituted pyrazoles through the acceptorless dehydrogenative coupling (ADC) reaction catalyzed by a well-defined manganese(I)-pincer complex. Symmetrically substituted pyrazoles were synthesized by reacting 1,3-diols with hydrazines. Unsymmetrically substituted pyrazoles were selectively made via the ADC of primary alcohols with methyl hydrazones. Water and hydrogen are liberated as the green byproducts. The endurance of these methodologies has been presented by producing 30 substrates with varied functionalities. Model reactions were scaled up to demonstrate practicability. The reaction rate and order were measured to transparent the involvement of the reagents during catalysis. Control experiments elucidated the plausible reaction mechanisms.

Manganese-catalyzed C-C and C-N bond formation with alcohols via borrowing hydrogen or hydrogen auto-transfer

Transition-metal-mediated "borrowing hydrogen" also known as hydrogen auto-transfer reactions allow the sustainable construction of C-C and C-N bonds using alcohols as hydrogen donors. In recent years, manganese complexes have been explored as efficient catalysts in these reactions. This review highlights the significant progress made in manganese-catalyzed C-C and C-N bond-formation reactions via hydrogen auto-transfer, emphasizing the importance of this methodology and manganese catalysts in sustainable synthesis strategies.

A Phosphine-Free Air-Stable Mn(II)-Catalyst for Sustainable Synthesis of Quinazolin-4(3H)-ones, Quinolines, and Quinoxalines in Water

The synthesis, characterization, and catalytic application of a new phosphine-free, well-defined, water-soluble, and air-stable Mn(II)-catalyst [Mn(L)(H2O)2Cl](Cl) ([1]Cl) featuring a 1,10-phenanthroline based tridentate pincer ligand, 2-(1H-pyrazol-1-yl)-1,10-phenanthroline (L), in dehydrogenative functionalization of alcohols to various N-heterocycles such as quinazolin-4(3H)-ones, quinolines, and quinoxalines are reported here. A wide array of multisubstituted quinazolin-4(3H)-ones were prepared in water under air following two pathways via the dehydrogenative coupling of alcohols with 2-aminobenzamides and 2-aminobenzonitriles, respectively. 2-Aminobenzyl alcohol and ketones bearing active methylene group were used as coupling partners for synthesizing quinoline derivatives, and various quinoxaline derivatives were prepared by coupling vicinal diols and 1,2-diamines. In all cases, the reaction proceeded smoothly using our Mn(II)-catalyst [1]Cl in water under air, affording the desired N-heterocycles in satisfactory yields starting from cheap and readily accessible precursors. Gram-scale synthesis of the compounds indicates the industrial relevance of our synthetic strategy. Control experiments were performed to understand and unveil the plausible reaction mechanism.

Low-Valent Transition Metalate Anions in Synthesis, Small Molecule Activation, and Catalysis

This review surveys the synthesis and reactivity of low-oxidation state metalate anions of the d-block elements, with an emphasis on contributions reported between 2006 and 2022. Although the field has a long and rich history, the chemistry of transition metalate anions has been greatly enhanced in the last 15 years by the application of advanced concepts in complex synthesis and ligand design. In recent years, the potential of highly reactive metalate complexes in the fields of small molecule activation and homogeneous catalysis has become increasingly evident. Consequently, exciting applications in small molecule activation have been developed, including in catalytic transformations. This article intends to guide the reader through the fascinating world of low-valent transition metalates. The first part of the review describes the synthesis and reactivity of d-block metalates stabilized by an assortment of ligand frameworks, including carbonyls, isocyanides, alkenes and polyarenes, phosphines and phosphorus heterocycles, amides, and redox-active nitrogen-based ligands. Thereby, the reader will be familiarized with the impact of different ligand types on the physical and chemical properties of metalates. In addition, ion-pairing interactions and metal-metal bonding may have a dramatic influence on metalate structures and reactivities. The complex ramifications of these effects are examined in a separate section. The second part of the review is devoted to the reactivity of the metalates toward small inorganic molecules such as H2, N2, CO, CO2, P4 and related species. It is shown that the use of highly electron-rich and reactive metalates in small molecule activation translates into impressive catalytic properties in the hydrogenation of organic molecules and the reduction of N2, CO, and CO2. The results discussed in this review illustrate that the potential of transition metalate anions is increasingly being tapped for challenging catalytic processes with relevance to organic synthesis and energy conversion. Therefore, it is hoped that this review will serve as a useful resource to inspire further developments in this dynamic research field.

NNN manganese complex-catalyzed α-alkylation of methyl ketones using alcohols: an experimental and computational study

We present here a phosphine-free, quinoline-based pincer Mn catalyst for α-alkylation of methyl ketones using primary alcohols as alkyl surrogates. The C-C bond formation reaction proceeds via a hydrogen auto-transfer methodology. The sole by-product formed is water, rendering the protocol atom efficient. Electronic structure theory studies corroborated the proposed mechanism.

Synthesis of Thiophene-Substituted Ketones via Manganese-Catalyzed Dehydrogenative Coupling Reaction

This study reports an efficient and green one-step method for synthesizing thiophene-substituted ketones from 2-thiophenemethanol and ketones via dehydrogenative coupling using manganese complexes as catalysts. The manganese complex demonstrated a broad applicability under mild conditions and extended the range of usable substrates. Utilizing this strategy, we carried out an efficient and diverse reaction of ketones with 2-thiophenemethanol, and successfully synthesized a series of thiophene-substituted saturated ketones and α, β-unsaturated ketones in good isolated yields.

Applying green chemistry principles to iron catalysis: mild and selective domino synthesis of pyrroles from nitroarenes

An efficient and general cascade synthesis of pyrroles from nitroarenes using an acid-tolerant homogeneous iron catalyst is presented. Initial (transfer) hydrogenation using the commercially available iron-Tetraphos catalyst is followed by acid catalysed Paal-Knorr condensation. Both formic acid and molecular hydrogen can be used as green reductants in this process. Particularly, under transfer hydrogenation conditions, the homogeneous catalyst shows remarkable reactivity at low temperatures, high functional group tolerance and excellent chemoselectivity transforming a wide variety of substrates. Compared to classical heterogeneous catalysts, this system presents complementing reactivity, showing none of the typical side reactions such as dehalogenation, debenzylation, arene or olefin hydrogenation. It thereby enhances the chemical toolbox in terms of orthogonal reactivity. The methodology was successfully applied to the late-stage modification of multi-functional drug(-like) molecules as well as to the one-pot synthesis of the bioactive agent BM-635.

Synthesis, Characterization, and Reactivity of a (PPP) Pincer-Ligated Manganese Carbonyl Complex: Polarity Reversal Imparted by the Electrophilic Nature of a Planar Mn-P(NR2)2 Fragment

The bonding interactions of a synthesized pincer-ligated manganese dicarbonyl complex featuring an N-heterocyclic phosphenium (NHP+) central moiety are explored. The pincer ligand [PPP]Cl was coordinated to a manganese center using Mn(CO)5Br and 254 nm light to afford the chlorophosphine complex (PPClP)Mn(CO)2Br (2) as a mixture of halide exchange products and stereoisomers. The target dicarbonyl species (PPP)Mn(CO)2 (3) was prepared by treatment of 2 with 2 equiv of the reductant KC8. Computational investigations and analysis of structural parameters were used to elucidate multiple bonding interactions between the Mn center and the PNHP atom in 3. The generation of a product of formal H2 addition, (PPHP)Mn(CO)2H (4), was achieved through the dehydrogenation of NH3BH3, affording a 2:1 mixture of 4syn:4anti stereoisomers. The nucleophilic nature of the Mn center and the electrophilic nature of the PNHP moiety were demonstrated through hydride addition and protonation of 3 to produce K(THF)2[(PPHP)Mn(CO)2] (6) and (PPClP)Mn(CO)2H (5), respectively. The observed reactivity suggests that 3 is best described as a Mn-I/NHP+ complex, in contrast to pincer-ligated dicarbonyl manganese analogues typically assigned as MnI species.

Copper/Nitroxyl-Catalyzed Synthesis of Pyrroles by Oxidative Coupling of Diols and Primary Amines at Room Temperature

The Cu/ABNO-catalyzed aerobic oxidative coupling of diols and primary amines to access N-substituted pyrroles is highlighted (ABNO = 9-azabicyclo[3.3.1]nonane N-oxyl). The reaction proceeds at room temperature with an O₂ balloon as the oxidant using commercially available materials as the substrates and catalysts. The catalyst system is characterized by a broad range of substrates and a good tolerance to sensitive functional groups. The gram-scale experiment proves this system's practicability.

Well-Defined Phosphine-Free Manganese(II)-Complex-Catalyzed Synthesis of Quinolines, Pyrroles, and Pyridines

Herein, we report a simple, phosphine-free, and inexpensive catalytic system based on a manganese(II) complex for synthesizing different important N-heterocycles such as quinolines, pyrroles, and pyridines from amino alcohols and ketones. Several control experiments, kinetic studies, and DFT calculations were carried out to support the plausible reaction mechanism. We also detected two potential intermediates in the catalytic cycle using ESI-MS analysis. Based on these studies, a metal-ligand cooperative mechanism was proposed.

Efficient Synthesis of C3-Alkylated and Alkenylated Indoles via Manganese-Catalyzed Dehydrogenation

The catalytic dehydrogenation of alcohols is essential for the sustainable production of valuable products. This provids a new strategy for green organic synthesis in chemical industries. Herein, we describe a manganese-based catalytic system that enables the efficient synthesis of C3-alkylated indoles from benzyl alcohols and indoles via the borrowing hydrogen process. Furthermore, dehydrogenative coupling of 2-arylethanols and indoles yields C3-alkenylated indoles. Meanwhile, reacting 2-aminophenethanol instead of indoles can also obtain the corresponding indole products with high selectivity under the same conditions.

A theoretical study of asymmetric ketone hydrogenation catalyzed by Mn complexes: from the catalytic mechanism to the catalyst design

Herein, a density functional theory (DFT) study was performed to investigate asymmetric ketone hydrogenation (AKH) catalyzed by Mn complexes, from the catalytic mechanism to the catalyst design. The calculated results indicated that the Mn(CO)₂-PSiNSiP (A1, PSiNSiP = P(Ph)₂Si(CH₃)₂NSi(CH₃)₂P(Ph)₂) pincer complex has potential high catalytic activity for ketone hydrogenation. The Mn(CO)-LYB (B, LYB = P(Ph)₂Si(CH₃)₂NSi(CH₃)₂P(Me)₂) pincer complex was then designed to catalyze AKH with good stereoselectivity. The hydrogen transfer (HT) step is the chirality-determining step. To avoid the enantiomer of Mn(CO)₂-LYB, which could eliminate the high stereoselectivity during AKH, novel Mn complexes with quadridentate ligands, such as Mn(CO)-LYC (C, LYC = P(CH₃)₂CH₂Si(CH₃)NSi(CH₃)(Si(CH₃)CH₂P(CH₃)₂)CH₂P(Ph)₂) and Mn(CO)-LYD (D, LYD = P(CH₃)₂CH₂Si(CH₃)NSi(CH₃)(Si(CH₃)CH₂P(CH₃)₂)CH₂P(Cy)₂), were designed to drive AKH with medium stereoselectivity. In order to increase the stereoselectivity of AKH, Mn(CO)-LYE (E, LYE = PH₂CH₂Si(CH₃)NSi(CH₃)(Si(CH₃)CH₂P(CH₃)₂)CH₂P(Ph)₂) and Mn(CO)-LYF (F, LYF = PH₂CH₂Si(CH₃)NSi(CH₃)(Si(CH₃)CH₂P(CH₃)₂)CH₂P(Cy)₂) were further designed and showed very good stereoselectivity, which is due to the lower deformation energy and stronger interactions between the ketone substrates and catalysts. This work may shed light on the design of cheap metal catalysts with a new ligand framework for the asymmetric hydrogenation (AH) of CX bonds (X = O, N).

Ruthenium-Catalyzed Dehydrogenative Functionalization of Alcohols to Pyrroles: A Comparison between Metal-Ligand Cooperative and Non-cooperative Approaches

Herein, we report the synthesis and characterization of two ruthenium-based pincer-type catalysts, [1]X (X = Cl, PF₆) and 2, containing two different tridentate pincer ligands, 2-pyrazolyl-(1,10-phenanthroline) (L¹) and 2-arylazo-(1,10-phenanthroline) (L^2a/2b, L^2a = 2-(phenyldiazenyl)-1,10-phenanthroline; L^2b = 2-((4-chlorophenyl)diazenyl)-1,10-phenanthroline), and their application in the synthesis of substituted pyrroles via dehydrogenative alcohol functionalization reactions. In catalyst [1]X (X = Cl, PF₆), the tridentate scaffold 2-pyrazolyl-(1,10-phenanthroline) (L¹) is apparently redox innocent, and all the redox events occur at the metal center, and the coordinated ligands remain as spectators. In contrast, in catalysts 2a and 2b, the coordinated azo-aromatic scaffolds are highly redox-active and known to participate actively during the dehydrogenation of alcohols. A comparison between the catalytic activities of these two catalysts was made, starting from the simple dehydrogenation of alcohols to further dehydrogenative functionalization of alcohols to various substituted pyrroles to understand the advantages/disadvantages of the metal-ligand cooperative approach. Various substituted pyrroles were prepared via dehydrogenative coupling of secondary alcohols and amino alcohols, and the N-substituted pyrroles were synthesized via dehydrogenative coupling of aromatic amines with cis-2-butene-1,4-diol and 2-butyne-1,4-diol, respectively. Several control reactions and spectroscopic experiments were performed to characterize the catalysts and establish the reaction mechanism.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

Ketones as strategic building blocks for the synthesis of natural product-inspired compounds

Natural product-inspired compound collections serve as excellent sources for the identification of new bioactive compounds to treat disease. However, such compounds must necessarily be more structurally-enriched than traditional screening compounds, therefore inventive synthetic strategies and reliable methods are needed to prepare them. Amongst the various possible starting materials that could be considered for the synthesis of natural product-inspired compounds, ketones can be especially valuable due to the vast variety of complexity-building synthetic transformations that they can take part in, their high prevalence as commercial building blocks, and relative ease of synthesis. With a view towards developing a unified synthetic strategy for the preparation of next generation bioactive compound collections, this review considers whether ketones could serve as general precursors in this regard, and summarises the opulence of synthetic transformations available for the annulation of natural product ring-systems to ketone starting materials.

Manganese-catalyzed Synthesis of Imines from Primary Alcohols and Aromatic Amines

Herein, we describe the synthesis of a wide variety of imines through oxidative coupling of alcohols and (hetero)aromatic amines catalyzed by Mn complexes bearing N^N triazole ligands. A wide variety of imines in excellent yields (up to 99%) have been prepared. Mn-based catalysts proved to be highly efficient and versatile, allowing for the first time, the preparation of several imines containing N-based heterocycles.

Ruthenium-catalyzed acceptorless dehydrogenative coupling of amino alcohols and ynones to access 3-acylpyrroles

Herein, a new strategy for the direct synthesis of functionalized pyrroles from β-amino alcohols and ynones via ruthenium-catalyzed acceptorless dehydrogenative coupling has been demonstrated. This developed methodology proceeds in an atom- and step-economic fashion together with the merits of broad substrate scope, operational simplicity, and water and hydrogen gas as the sole by-products, which provides an alternative and sustainable way to access functionalized pyrroles. Further, this method was applied to the rapid synthesis of the COX-1/COX-2 inhibitor and boron dipyrromethene derivative successfully.

Copper-catalyzed C-H/N-H annulation of enaminones and alkynyl esters for densely substituted pyrrole synthesis

Herein, the copper-catalyzed annulation of enaminones with alkynyl esters for the facile synthesis of different pyrroles with a 2,3,4,5-tetrasubstituted structure has been developed. With Cu(OAc)₂ as the only catalyst, the tunable synthesis of 2-vinyl and 2,3-dicarboxyl-functionalized pyrroles has been achieved by using terminal and internal alkynyl esters, respectively. The synthesis of 2-vinyl pyrroles represents the first example accessing 2-vinyl substituted pyrroles via direct cascade reactions involving vinylation and pyrrole ring formation.

Synthesis of Unsymmetrically Tetrasubstituted Pyrroles and Studies of AIEE in Pyrrolo[1,2-a]pyrimidine Derivatives

Pyrroles are among the most important heterocycles in pharmaceuticals and agrochemicals. Construction of pyrrole scaffolds with different substituents and free NH group however, is challenging. Herein, a metal-free method for...

Immobilizing a homogeneous manganese catalyst into MOF pores for α-alkylation of methylene ketones with alcohols

An encapsulation strategy via nano-confinement of a homogeneous manganese–phenanthroline complex into MOF pores selectively produced functionalized branched ketones.

Ascendancy of Nitrogen Heterocycles in the Computationally Designed Mn(I)PNN Pincer Catalysts on the Hydrogenation of Carbon Dioxide to Methanol

The development of sustainable catalysts to get methanol from CO₂ under milder conditions and without any additives is still considered an arduous task. In many instances, transition-metal-catalyzed carbon dioxide to formic acid formation is more facile than methanol formation. This article provides comprehensive density functional theoretic investigations of six new Mn(I)PNN complexes, which are designed to perform CO₂ to methanol conversion under milder reaction conditions. All these six catalysts have similar structural features except at terminal nitrogen, -N (1), where adenine-inspired nitrogen heterocycles containing pyridine and pyrimidine moieties are attached to instill an electron withdrawing effect on the central metal and thus to facilitate dihydrogen polarization during the catalyst regeneration. All these computationally modeled Mn(I)PNN complexes demonstrate the promising catalytic activity to get methanol through cascade catalytic cycles at 298.15 K. The metal-ligand cooperative (MLC) as well as noncooperative (NC) pathways are investigated for each catalytic cycle. The NC pathway is the preferred pathway for formic acid and formaldehyde formation, whereas methanol formation proceeds through only the MLC pathway. Different nitrogen heterocycles attached to the -N (1) terminal manifested a considerable amount of impact on the Gibbs free energies, overall activation energies, and computed turnover frequencies (TOFs). Among all the catalysts, SPCAT02 provides excellent TOFs for HCO₂H (500 151 h^-1), HCHO (11 912 h^-1), and CH₃OH (2 372 400 h^-1) formation at 50 °C. SPCAT04 is found to be a better catalyst for the selective formation of formic acid formation at room temperature than the rest of the catalysts. The computed TOF results are found reliable upon comparison with experimentally established catalysts. To establish the structure-activity relationship, the activation strain model and Fukui function calculations are performed on all the catalysts. Both these studies provide complementary results. The present study revealed a very important finding that a more electrophilic metal center could facilitate the CO₂ hydrogenation reaction robustly. All computationally designed catalysts could be cheaper and better alternatives to convert CO₂ to methanol under mild reaction conditions in an aqueous medium.

First-Row Transition-Metal Catalyzed Acceptorless Dehydrogenation and Related Reactions: A Personal Account

The development of sustainable catalytic protocols that circumvent the use of expensive and precious metal catalysts and avoid toxic reagents plays a crucial role in organic synthesis. Indeed, the direct employment of simple and abundantly available feedstock chemicals as the starting materials broadens their synthetic application in contemporary research. In particular, the transition metal-catalyzed diversification of alcohols with various nucleophilic partners to construct a wide range of building blocks is a powerful and highly desirable methodology. Moreover, the replacement of precious metal catalysts by non-precious and less toxic metals for selective transformations is one of the main goals and has been paid significant attention to in modern chemistry. In view of this, the first-row transition metal catalysts find extensive applications in various synthetic transformations such as catalytic hydrogenation, dehydrogenation, and related reactions. Herein, we have disclosed our recent developments on the base-metal catalysis such as Mn, Fe, Co, and Ni for the acceptorless dehydrogenation reactions and its application in the C-C and C-N bond formation via hydrogen auto-transfer (HA) and acceptorless dehydrogenation coupling (ADC) reactions. These HA/ADC protocols employ alcohol as alkylating agents and eliminate water and/or hydrogen gas as by-products, representing highly atom-efficient and environmentally benign reactions. Furthermore, diverse simple to complex organic molecules synthesis by C-C and C-N bond formation using feedstock alcohols are also overviewed. Overall, this account deals with the contribution and development of efficient and novel homogeneous as well as heterogeneous base-metal catalysts for sustainable chemical synthesis.

Advancements in multifunctional manganese complexes for catalytic hydrogen transfer reactions

Catalytic hydrogen transfer reactions have enormous academic and industrial applications for the production of diverse molecular scaffolds. Over the past few decades, precious late transition-metal catalysts were employed for these reactions. The early transition metals have recently gained much attention due to their lower cost, less toxicity, and overall sustainability. In this regard, manganese, which is the third most abundant transition metal in the Earth's crust, has emerged as a viable alternative. However, the key to the success of such manganese-based complexes lies in the multifunctional ligand design and choice of appropriate ancillary ligands, which helps them mimic and, even in some cases, supersede noble metals' activities. The metal-ligand bifunctionality, achieved via deprotonation of the acidic C-H or N-H bonds, is one of the powerful strategies employed for this purpose. Alongside, the ligand hemilability in which a weakly chelating group tunes in between the coordinated and uncoordinated stages could effectively stabilize the reactive intermediates, thereby facilitating substrate activation and catalysis. Redox non-innocent ligands acting as an electron sink, thereby helping the metal center in steps gaining or losing electrons, and non-classical metal-ligand cooperativity has also played a significant role in the ligand design for manganese catalysis. The strategies were not only employed for the chemoselective hydrogenation of different reducible functionalities but also for the C-X (X = C/N) coupling reactions via HT and downstream cascade processes. This article features multifunctional ligand-based manganese complexes, highlighting the importance of ligand design and choice of ancillary ligands for achieving the desired catalytic activity and selectivity for HT reactions. We have also discussed the detailed reaction pathways for metal complexes involving bifunctionality, hemilability, redox activity, and indirect metal-ligand cooperativity. The synthetic utilization of those complexes in different organic transformations has also been detailed.

A Proton-Responsive Pyridyl(benzamide)-Functionalized NHC Ligand on Ir Complex for Alkylation of Ketones and Secondary Alcohols

A Cp*Ir(III) complex (1) of a newly designed ligand L¹ featuring a proton-responsive pyridyl(benzamide) appended on N-heterocyclic carbene (NHC) has been synthesized. The molecular structure of 1 reveals a dearomatized form of the ligand. The protonation of 1 with HBF₄ in tetrahydrofuran gives the corresponding aromatized complex [Cp*Ir(L¹ H)Cl]BF₄ (2). Both compounds are characterized spectroscopically and by X-ray crystallography. The protonation of 1 with acid is examined by ¹ H NMR and UV-vis spectra. The proton-responsive character of 1 is exploited for catalyzing α-alkylation of ketones and β-alkylation of secondary alcohols using primary alcohols as alkylating agents through hydrogen-borrowing methodology. Compound 1 is an effective catalyst for these reactions and exhibits a superior activity in comparison to a structurally similar iridium complex [Cp*Ir(L² )Cl]PF₆ (3) lacking a proton-responsive pendant amide moiety. The catalytic alkylation is characterized by a wide substrate scope, low catalyst and base loadings, and a short reaction time. The catalytic efficacy of 1 is also demonstrated for the syntheses of quinoline and lactone derivatives via acceptorless dehydrogenation, and selective alkylation of two steroids, pregnenolone and testosterone. Detailed mechanistic investigations and DFT calculations substantiate the role of the proton-responsive ligand in the hydrogen-borrowing process.

Manganese(I) Catalyzed α-Alkenylation of Amides Using Alcohols with Liberation of Hydrogen and Water

Herein, unprecedented manganese-catalyzed direct α-alkenylation of amides using alcohols is reported. Aryl amides are reacted with diverse primary alcohols, which provided the α,β-unsaturated amides in moderate to good yields with excellent selectivity. Mechanistic studies indicate that Mn(I) catalyst oxidizes the alcohols to their corresponding aldehydes and also plays an important role in efficient C═C bond formation through aldol condensation. This selective olefination is facilitated by metal-ligand cooperation by the aromatization-dearomatization process operating in the catalytic system. Biorenewable alcohols are used as alkenylation reagents for the challenging α-alkenylation of amides with the highly abundant base metal manganese as a catalyst, which results in water and dihydrogen as the only byproduct, making this catalytic transformation attractive, sustainable, and environmentally benign.

Catalytic Acceptorless Dehydrogenation of Amino Alcohols and 2-Hydroxybenzyl Alcohols for Annulation Reaction under Neutral Conditions

A base-free and acceptorless Ru-catalyzed dehydrogenative approach has been developed for the synthesis of N-heterocycles by using 1,3-dicarbonyls and amino alcohols through a domino sequential enamine formation and intramolecular oxidative cyclization strategy. This unified approach is also applicable for the synthesis of O-heterocycles involving 2-hydroxybenzyl alcohol as a coupling reactant via consecutive C-alkylation and intramolecular cyclization steps. The present protocol is general for the synthesis of varieties of biologically important scaffolds, such as tetrahydro-4H-indol-4-one, 3,4-dihydroacridin-1(2H)-one, and tetrahydro-1H-xanthen-1-ones derivatives using a single catalytic system, viz. RuH₂CO(PPh₃)₃. Environmentally benign H₂O and H₂ are the only byproducts in this domino process. Moreover, RuH₂CO(PPh₃)₃-catalyzed C3-alkylation of tetrahydro-4H-indol-4-one using alcohol as a alkylating partner is also described in this report. For the first time, a solvent-free gram-scale reaction for the acceptorless dehydrogenative annulation has been demonstrated. A plausible mechanism for the Ru-catalyzed base-free and acceptorless dehydrogenative annulation of amino alcohols or 2-hydroxybenzyl alcohols has been provided with several experimental investigations and spectroscopic evidence.