Carbon Nitride Aerogels for the Photoredox Conversion of Water

Rapid and inexpensive synthesis of liter-scale SiC aerogels

Ceramic aerogels are promising materials for thermal insulation and protection under harsh environments. Yet current synthesis methods fail to provide an energy-, time-, and cost-effective route for high-throughput production and large-scale applications, especially for non-oxide ceramic aerogels. Here we reported a way to synthesize SiC aerogels within seconds and over liter scale, with a demonstrated throughput of ~16 L min-1 in a typical lab experiment. The key lies in renovated combustion synthesis and a fast expansion from powder reactants to aerogel products over 1000% in volume. The synthesis process is self-sustainable and requires minimal energy input. The product is very cheap, with an estimated price of ~$0.7 L-1 (~$7 kg-1). The obtained SiC aerogels have excellent thermo-mechanical properties, including low thermal conductivity, high elasticity, and damage tolerance. Our invention not only offers a practical pathway for large-scale applications of ceramic aerogels, but also calls for rethinking of combustion synthesis in one-step conversion from raw chemicals to bulk products ready for practical applications.

Enhancing Built-in Electric Fields via Molecular Symmetry Modulation in Supramolecular Photocatalysts for Highly Efficient Photocatalytic Hydrogen Evolution

Nature-inspired supramolecular self-assemblies are attractive photocatalysts, but their quantum yields are limited by poor charge separation and transportation. A promising strategy for efficient charge transfer is to enhance the built-in electric field by symmetry breaking. Herein, an unsymmetric protonation, N-heterocyclic π-conjugated anthrazoline-based supramolecular photocatalyst SA-DADK-H+ was developed. The unsymmetric protonation breaks the initial structural symmetry of DADK, resulting in ca. 50-fold increase in the molecular dipole, and facilitates efficient charge separation and transfer within SA-DADK-H+. The protonation process also creates numerous active sites for H2O adsorption, and serves as crucial proton relays, significantly improving the photocatalytic efficiency. Remarkably, SA-DADK-H+ exhibits an outstanding hydrogen evolution rate of 278.2 mmol g-1 h-1 and a remarkable apparent quantum efficiency of 25.1 % at 450 nm, placing it among the state-of-the-art performances in organic semiconductor photocatalysts. Furthermore, the versatility of the unsymmetric protonation approach has been successfully applied to four other photocatalysts, enhancing their photocatalytic performance by 39 to 533 times. These findings highlight the considerable potential of unsymmetric protonation induced symmetry breaking strategy in tailoring supramolecular photocatalysts for efficient solar-to-fuel production.

Recent developments in photocatalytic production of hydrogen peroxide

Hydrogen peroxide (H2O2), an environmentally friendly strong oxidant and energy carrier, has attracted widespread attention in photocatalysis. Artificial photosynthesis of H2O2 using water and oxygen as raw materials, solar energy as an energy source, and semiconductor materials as catalysts is considered a promising technology. In the past few decades, encouraging progress has been made in the photocatalytic production of H2O2. Therefore, we summarize the research achievements in this field in recent years. This review first briefly introduces the reaction pathway, detection techniques and evaluation metrics. Then, the recent advances in photocatalysts are highlighted. Furthermore, the existing challenges and possible solutions in this field are presented. At last, we look forward to the future development direction of this field. This review provides valuable insights and guidance for efficient photocatalytic H2O2 production.

Developing Polymeric Carbon Nitrides for Photocatalytic H2O2 Production

Hydrogen peroxide (H2O2) plays a crucial role in various applications, such as green oxidation processes and the production of high-quality fuels. Currently, H2O2 is primarily manufactured using the indirect anthraquinone method, known for its significant energy consumption and the generation of intensive by-products. Extensive research has been conducted on the photocatalytic production of H2O2 via oxygen reduction reaction (ORR), with polymeric carbon nitride (PCN) emerging as a promising catalyst for this conversion. This review article is organized around two approaches. The first part main consists of the chemical optimization of the PCN structure, while the second focuses on the physical integration of PCN with other functional materials. The objective is to clarify the correlation between the physicochemical properties of PCN photocatalysts and their effectiveness in H2O2 production. Through a thorough review and analysis of the findings, this article seeks to stimulate new insights and achievements, not only in the domain of H2O2 production via ORR but also in other redox reactions.

Self-assembled B-doped flower-like graphitic carbon nitride with high specific surface area for enhanced photocatalytic performance

Graphitic carbon nitride (g-C3N4) is a promising nonmetallic photocatalyst. In this manuscript, B-doped 3D flower-like g-C3N4 mesoporous nanospheres (BMNS) were successfully prepared by self-assembly method. The doping of B element promotes the internal growth of hollow flower-like g-C3N4 without changing the surface roughness structure, resulting in a porous floc structure, which enhances the light absorption and light reflection ability, thereby improving the light utilization rate. In addition, B element provides lower band gap, which stimulates the carrier movement and increases the activity of photogenerated carriers. The photocatalytic mechanism and process of BMNS were investigated in depth by structural characterization and performance testing. BMNS-10 % shows good degradation for four different pollutants, among which the degradation effect on Rhodamine B (RhB) reaches 97 % in 30 min. The apparent rate constant of RhB degradation by BMNS-10 % is 0.125 min-1, which is 46 times faster compared to bulk g-C3N4 (BCN). And the photocatalyst also exhibits excellent H2O2 production rate under visible light. Under λ > 420 nm, the H2O2 yield of BMNS-10 % (779.9 μM) in 1 h is 15.9 times higher than that of BCN (48.98 μM). Finally, the photocatalytic mechanism is proposed from the results of free radical trapping experiments.

Laser direct overall water splitting for H2 and H2O2 production

Hydrogen (H2) and hydrogen peroxide (H2O2) play crucial roles as energy carriers and raw materials for industrial production. However, the current techniques for H2 and H2O2 production rely on complex catalysts and involve multiple intermediate steps. In this study, we present a straightforward, environmentally friendly, and highly efficient laser-induced conversion method for overall water splitting to simultaneously generate H2 and H2O2 at ambient conditions without any catalysts. The laser direct overall water splitting approach achieves an impressive light-to-hydrogen energy conversion efficiency of 2.1%, with H2 production rates of 2.2 mmol/h and H2O2 production rates of 65 µM/h in a limited reaction area (1 mm2) within a short real reaction time (0.36 ms/h). Furthermore, we elucidate the underlying physics and chemistry behind the laser-induced water splitting to produce H2 and H2O2. The laser-induced cavitation bubbles create an optimal microenvironment for water-splitting reactions because of the transient high temperatures (104 K) surpassing the chemical barrier required. Additionally, their rapid cooling rate (1010 K/s) hinders reverse reactions and facilitates H2O2 retention. Finally, upon bubble collapse, H2 is released while H2O2 remains dissolved in the water. Moreover, a preliminary amplification experiment demonstrates the potential industrial applications of this laser chemistry. These findings highlight that laser-based production of H2 and H2O2 from water holds promise as a straightforward, environmentally friendly, and efficient approach on an industrial scale beyond conventional chemical catalysis.

Folk arts-inspired twice-coagulated configuration-editable tough aerogels enabled by transformable gel precursors

Aerogels, as famous lightweight and porous nanomaterials, have attracted considerable attention in various emerging fields in recent decades, however, both low density and weak mechanical performance make their configuration-editing capability challenging. Inspired by folk arts, herein we establish a highly efficient twice-coagulated (TC) strategy to fabricate configuration-editable tough aerogels enabled by transformable gel precursors. As a proof of concept, aramid nanofibers (ANFs) and polyvinyl alcohol (PVA) are selected as the main components of aerogel, among which PVA forms a flexible configuration-editing gel network in the first coagulation process, and ANF forms a configuration-locking gel network in the second coagulation process. TC strategy guarantees the resulting aerogels with both high toughness and feasible configuration editing capability individually or simultaneously. Altogether, the resulting tough aerogels with special configuration through soft to hard modulation provide great opportunities to break through the performance limits of the aerogels and expand application areas of aerogels.

Supramolecular self-assemble deficient carbon nitride nanotubes for efficient photocatalytic CO2 reduction

Carbon nitride is an attractive non-metallic photocatalyst due to its small surface area, rapid electron-hole recombination, and low absorption of visible light. In this study, one-dimensional carbon nitride nanotubes were successfully synthesized by supramolecular self-assembly method for photocatalytic reduction of CO2 under mild conditions. The material demonstrates significantly improved CO2-to-CO activity compared to bulk carbon nitride under visible light irradiation, with a rate of 12.58 μmol g-1h-1, which is 3.37 times higher than that of pristine carbon nitride. This enhanced activity can be attributed to the abundant oxygen defects and nitrogen vacancies in the unique tubular carbon nitride structure, which results in the generation of more active sites and the efficient acceleration of the migration of photogenerated electron-hole pairs. Various characterizations collectively support the presence of these defects and vacancies. Moreover, in situ DRIFTS spectroscopy supported the proposed reaction mechanism for the photoreduction of CO2. This eco-friendly design approach provides novel insights into utilizing solar energy for the production of value-added products.

Efficient photosynthesis of hydrogen peroxide by triazole-modified covalent triazine framework nanosheets

Two-dimensional (2D) polymeric semiconductors, especially covalent triazine framework (CTF) nanosheets with aromatic triazine linkages are emerging as attractive metal-free photocatalysts owing to their predictable structures, good semiconducting properties, and high stability. However, the quantum size effect and ineffective electron screening of 2D CTF nanosheets cause an enlargement of electronic band gap and high excited electron-hole binding energies, which lead to low-level enhancements in photocatalytic performance. Herein, we present a novel triazole groups functionalized CTF nanosheet (CTF-LTZ) synthesized by facile combination of ionothermal polymerization and freeze-drying strategy from the unique letrozole precursor. The incorporation of the high-nitrogen-containing triazole group effectively modulates the optical and electronic properties, resulting in narrowed bandgap from 2.92 eV for unfunctionalized CTF to 2.22 eV for CTF-LTZ and dramatically improved charge separation, as well as highly-active sites for O2 adsorption. As a result, CTF-LTZ photocatalyst exhibits excellent performance and superior stability in H2O2 photosynthesis, with a high H2O2 production rate of 4068 μmol h-1 g-1 and a remarkable apparent quantum efficiency of 4.5 % at 400 nm. This work provides a simple and effective approach for rational design highly-efficient polymeric photocatalysts for H2O2 production.

Construction of Hexameric Ru-Substitution POMs to Improve Photocatalytic H2 Evolution

Converting solar energy into storable hydrogen energy by employing green photocatalytic technology offers a reliable alternative for meeting the energy crisis. The polyoxometalates are a promising candidate for hydrogen production photocatalysts because of their unique electronic and structural properties and controllable design at the molecular level. Introducing noble metals was proven to be an effective method to greatly enhance the photocatalytic efficiency of polyoxometalates. Herein, two unprecedented compounds of hexameric Ru-POMs, Na4H10[As2RuIV2W11O18(OH)4(H2O)6{AsW8RuIVO31(OH)Cl}2(B-β-AsW9O33)4]·93H2O (1) and Na2H19[AsRuIII2W11O20(OH)2(H2O)6(RuIIICl3)(B-β-AsW9O33)6]·90H2O (2), were successfully self-assembled. The H2 evolution rates of 1 and 2 under optimal conditions were 3578.75 and 3027.69 μmol h-1 g-1 with TONs of 255 and 205, respectively. The stability of 1 was demonstrated by a series of characterizations. Besides, a possible photocatalytic mechanism was proposed.

Bandgap Engineering of Melon using Highly Reduced Graphene Oxide for Enhanced Photoelectrochemical Hydrogen Evolution

The uncondensed form of polymeric carbon nitrides (PCN), generally known as melon, is a stacked 2D structure of poly(aminoimino)heptazine. Melon is used as a photocatalyst in solar energy conversion applications, but suffers from poor photoconversion efficiency due to weak optical absorption in the visible spectrum, high activation energy, and inefficient separation of photoexcited charge carriers. Experimental and theoretical studies are reported to engineer the bandgap of melon with highly reduced graphene oxide (HRG). Three HRG@melon nanocomposites with different HRG:melon ratios (0.5%, 1%, and 2%) are prepared. The 1% HRG@melon nanocomposite shows higher photocurrent density (71 µA cm-2 ) than melon (24 µA cm-2 ) in alkaline conditions. The addition of a hole scavenger further increases the photocurrent density to 630 µA cm-2 relative to the reversible hydrogen electrode (RHE). These experimental results are validated by calculations using density functional theory (DFT), which revealed that HRG results in a significant charge redistribution and an improved photocatalytic hydrogen evolution reaction (HER).

Spatial Position Regulation of Cu Single Atom Site Realizes Efficient Nanozyme Photocatalytic Bactericidal Activity

Recently, single-atom nanozymes have made significant progress in the fields of sterilization and treatment, but their catalytic performance as substitutes for natural enzymes and drugs is far from satisfactory. Here, a method is reported to improve enzyme activity by adjusting the spatial position of a single-atom site on the nanoplatforms. Two types of Cu single-atom site nanozymes are synthesized in the interlayer (CuL /PHI) and in-plane (CuP /PHI) of poly (heptazine imide) (PHI) through different synthesis pathways. Experimental and theoretical analysis indicates that the interlayer position of PHI can effectively adjust the coordination number, coordination bond length, and electronic structure of Cu single atoms compared to the in-plane position, thereby promoting photoinduced electron migration and O2 activation, enabling effective generate reactive oxygen species (ROS). Under visible light irradiation, the photocatalytic bactericidal activity of CuL /PHI against aureus is ≈100%, achieving the same antibacterial effect as antibiotics, after 10 min of low-dose light exposure and 2 h of incubation.

Ultrafast charge transfer in metal-free H2O2 photoproduction by anhydride modified g-C3N4

As a low-cost, low toxicity and metal-free catalyst with strong light absorption, graphitic carbon nitride (g-C3N4)-based materials have gained wide attention for efficient H2O2 photocatalysis. However, further investigation regarding the charge transfer process and reaction mechanism of H2O2 photoproduction remains to be completed. In this work, bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BTDA) modified g-C3N4 is synthesized through a facile one-step dehydration process, and the H2O2 photoproduction could reach 22.5 μmol within 8 hours. The proposed structure of g-BTDA is confirmed by FTIR, XPS and SEM studies. The transient absorption reveals a 20.88 ps charge transfer process caused by the electron withdrawing ability of the CO group, and a 2-electron oxygen reduction pathway is proposed. Our work represents a new strategy for efficient H2O2 photoproduction using easily acquired materials with future application potential.

Strategies for Improving the Photocatalytic Hydrogen Evolution Reaction of Carbon Nitride-Based Catalysts

Due to the depletion of fossil fuels and their-related environmental issues, sustainable, clean, and renewable energy is urgently needed to replace fossil fuel as the primary energy resource. Hydrogen is considered as one of the cleanest energies. Among the approaches to hydrogen production, photocatalysis is the most sustainable and renewable solar energy technique. Considering the low cost of fabrication, earth abundance, appropriate bandgap, and high performance, carbon nitride has attracted extensive attention as the catalyst for photocatalytic hydrogen production in the last two decades. In this review, the carbon nitride-based photocatalytic hydrogen production system, including the catalytic mechanism and the strategies for improving the photocatalytic performance is discussed. According to the photocatalytic processes, the strengthened mechanism of carbon nitride-based catalysts is particularly described in terms of boosting the excitation of electrons and holes, suppressing carriers recombination, and enhancing the utilization efficiency of photon-excited electron-hole. Finally, the current trends related to the screening design of superior photocatalytic hydrogen production systems are outlined, and the development direction of carbon nitride for hydrogen production is clarified.

Molecular Level Modulation of Anthraquinone-containing Resorcinol-formaldehyde Resin Photocatalysts for H2 O2 Production with Exceeding 1.2 % Efficiency

Designing polymeric photocatalysts at the molecular level to modulate the photogenerated charge behavior is a promising and challenging strategy for efficient hydrogen peroxide (H₂ O₂ ) photosynthesis. Here, we introduce electron-deficient 1,4-dihydroxyanthraquinone (DHAQ) into the framework of resorcinol-formaldehyde (RF) resin, which modulates the donor/acceptor ratio from the perspective of molecular design for promoting the charge separation. Interestingly, H₂ O₂ can be produced via oxygen reduction and water oxidation pathways, verified by isotopic labeling and in situ characterization techniques. Density functional theory (DFT) calculations elucidate that DHAQ can reduce the energy barrier for H₂ O₂ production. RF-DHAQ exhibits excellent overall photosynthesis of H₂ O₂ with a solar-to-chemical conversion (SCC) efficiency exceeding 1.2 %. This work opens a new avenue to design polymeric photocatalysts at the molecular level for high-efficiency artificial photosynthesis.

Carbonyl heterocycle modified mesoporous carbon nitride in photocatalytic peroxydisulfate activation for enhanced ciprofloxacin removal: Performance and mechanism

Polymer carbon nitride is considered to be a promising photocatalyst with broad application prospects in water treatment. However, the defects of pristine polymer carbon nitride (PCN), such as small specific surface area, fast photogenerated electron-hole recombination, and low mass transfer efficiency, limit its photocatalytic activity. In this work, by introducing 2-thiouracil into the precursor, a carbonyl heterocycle-containing mesoporous carbon nitride photocatalyst (TCN) was successfully obtained with significantly enhanced peroxydisulfate (PDS) photocatalytic activity. In this study, the modulation mechanism of carbonyl heterocycle introduction on surface electronic structure and the band structure were fully discussed by means of a combination of experiments and theoretical calculations. The carbonyl and vicinal carbon-modified heterocycles dominated the electrons, while the adjacent heptazine ring dominated the holes. The photogenerated electron-hole pair recombination efficiency and the electron transition energy barrier were greatly reduced. According to the findings of density functional theory (DFT) calculations, the introduction of carbonyl and vicinal C modulated the electronic structure of catalyst, enhanced the adsorption of PDS at the carbonyl ortho N site, which promoted the electronic interaction between TCN and PDS molecules. Experiments showed that the free radical pathway and non-radical pathway coexisted in TCN/PDS/Vis system. The reactive oxygen species were mainly derived from PDS molecules. DFT calculations provided a more comprehensive theoretical basis for the experimental results. This study provided a fresh perspective on the rational design of carbon nitride-based catalysts and the reaction mechanism of persulfate advanced oxidation systems.

Construction of a novel S-scheme heterojunction piezoelectric photocatalyst V-BiOIO3/FTCN and immobilization with floatability for tetracycline degradation

A high-performance piezoelectric photocatalyst (V-BiOIO₃/FTCN) was constructed to improve removal efficiency of tetracycline hydrochloride (TCH). The role of V-BiOIO₃ in the composite was to introduce piezoelectric effect and construct S-scheme heterojunction photocatalyst with fish scale tubular carbon nitride (FTCN). The morphology, structure, chemical composition and optoelectronic characteristics of the as-prepared photocatalysts were studied by SEM, TEM, XRD, XPS and UV-Vis DRS. Combined with UV-Vis DRS, XPS valence band, Mott-schottky curve and theoretical calculations, the mechanism of TCH degradation was deeply analyzed. A series of degradation experiments showed that the V-BiOIO₃/FTCN could effectively degrade TCH, and the removal efficiency was further improved under the action of ultrasound. Importantly, the further immobilized V-BiOIO₃/FTCN/MS could float on the water surface to degrade TCH without additional stirring, which facilitated the recovery of photocatalysts and showed excellent practical application value. This work provided a reference for the design and immobilization of carbon nitride-based piezoelectric photocatalysts.

Oxygenated Hydrocarbons from Catalytic Hydrogenation of Carbon Dioxide

Once fundamental difficulties such as active sites and selectivity are fully resolved, metal-free catalysts such as 3D graphene or carbon nanotubes (CNT) are very cost-effective substitutes for the expensive noble metals used for catalyzing CO2. A viable method for converting environmental wastes into useful energy storage or industrial wealth, and one which also addresses the environmental and energy problems brought on by emissions of CO2, is CO2 hydrogenation into hydrocarbon compounds. The creation of catalytic compounds and knowledge about the reaction mechanisms have received considerable attention. Numerous variables affect the catalytic process, including metal–support interaction, metal particle sizes, and promoters. CO2 hydrogenation into different hydrocarbon compounds like lower olefins, alcoholic composites, long-chain hydrocarbon composites, and fuels, in addition to other categories, have been explained in previous studies. With respect to catalyst design, photocatalytic activity, and the reaction mechanism, recent advances in obtaining oxygenated hydrocarbons from CO2 processing have been made both through experiments and through density functional theory (DFT) simulations. This review highlights the progress made in the use of three-dimensional (3D) nanomaterials and their compounds and methods for their synthesis in the process of hydrogenation of CO2. Recent advances in catalytic performance and the conversion mechanism for CO2 hydrogenation into hydrocarbons that have been made using both experiments and DFT simulations are also discussed. The development of 3D nanomaterials and metal catalysts supported on 3D nanomaterials is important for CO2 conversion because of their stability and the ability to continuously support the catalytic processes, in addition to the ability to reduce CO2 directly and hydrogenate it into oxygenated hydrocarbons.

Sol-gel research in China: a brief history and recent research trends in synthesis of sol-gel derived materials and their applications

The sol-gel process has become a rapidly growing research area in materials science. A variety of materials prepared via sol-gel routes have shown unique properties and characteristics that are difficult to achieve using conventional methods. In recent years, tremendous progress in sol-gel R&D has been made not only in the world but also in China. Here, this review provides a retrospective overview of the sol-gel history in China and summarizes recent progress and applications of sol-gel research in Chinese universities, institutes, and industries. It highlights some of the recent developments published by Chinese researchers in the last 5 years, ranging from the sol-gel synthesis of nanomaterials, bulk materials, and functional coatings, to their applications in the fields of energy conversion, energy storage, photocatalysis, etc. It is evident that sol-gel technology nowadays in China has evolved into a vibrant research area both in academia and industry. Graphical abstract.

Enhanced photocatalytic organic pollutant degradation and H2 evolution reaction over carbon nitride nanosheets: N defects abundant materials

Post thermal treatment of bulk graphitic carbon nitride (g-C₃N₄) by ammonia gas acts as a significant structure regulation approach, while pure ammonia-assisted g-C₃N₄ synthesis from precursors like melamine is rarely investigated. Here we prove the synthesis of N-defects abundant carbon nitride nanosheets (ACN) through a one-pot thermal polymerization of melamine in pure ammonia gas, for photocatalytic organic pollutant removal in water and H₂ evolution applications. Compared to bulk g-C₃N₄ (BCN), ACN-550 (ACN prepared at 550 °C) exhibited thin-layered porous morphology with higher surface area and abundant N defects, resulting in wider distribution of active sites. Moreover, the abundant N defects in the heptazine heterocycle structure could change the electronic structure of g-C₃N₄, leading to more efficient transport of photogenerated charge carriers and enhanced photoreduction potential, which gives rise to notable improvement activities in photocatalytic reaction. With superoxide ion radical and photoinduced holes as the predominant reactive species, ACN-550 realized efficient photocatalytic bisphenol A (BPA) degradation, which is 1.6- and 4.7-fold high over commercial TiO₂ (P25) and BCN, respectively. ACN-550 exhibited excellent reusability and stability in five consecutive photocatalytic BPA degradation tests. In photo-reductive H₂ production system by ACN-550, 761.8 ± 4.3 μmol/h/g H₂ was produced, which was 11.6-fold as high as that by BCN.

Extended Conjugation Tuning Carbon Nitride for Non-sacrificial H2 O2 Photosynthesis and Hypoxic Tumor Therapy

Artificial photocatalysis offers a clean approach for producing H₂ O₂ . However, the poor selectivity and activity of H₂ O₂ production hamper traditional industrial applications and emerging photodynamic therapy (PDT)/chemodynamic therapy (CDT). Herein, we report a C₅ N₂ photocatalyst with a conjugated C=N linkage for selective and efficient non-sacrificial H₂ O₂ production in both normoxic and hypoxic systems. The strengthened delocalization of π-electrons by linkers in C₅ N₂ downshifted the band position, thermodynamically eliminating side H₂ evolution reaction and kinetically promoting water oxidation. As a result, C₅ N₂ had a competitive solar-to-chemical conversion efficiency of 0.55 % in overall H₂ O₂ production and exhibited by far the highest activity under hypoxic conditions (698 μM h^-1 ). C₅ N₂ was further applied to hypoxic PDT/CDT with outstanding performance in apparent cancer cell death and synchronous bioimaging. The study sheds light on the photosynthesis of H₂ O₂ by carbon nitrides for health applications.

Phosphorus Tailors the d-Band Center of Copper Atomic Sites for Efficient CO2 Photoreduction under Visible-Light Irradiation

Photoreduction of CO₂ into solar fuels has received great interest, but suffers from low catalytic efficiency and poor selectivity. Herein, two single-Cu-atom catalysts with unique Cu configurations in phosphorus-doped carbon nitride (PCN), namely, Cu₁ N₃ @PCN and Cu₁ P₃ @PCN were fabricated via selective phosphidation, and tested in visible light-driven CO₂ reduction by H₂ O without sacrificial agents. Cu₁ N₃ @PCN was exclusively active for CO production with a rate of 49.8 μmol_CO  g_cat ^-1  h^-1 , outperforming most polymeric carbon nitride (C₃ N₄ ) based catalysts, while Cu₁ P₃ @PCN preferably yielded H₂ . Experimental and theoretical analysis suggested that doping P in C₃ N₄ by replacing a corner C atom upshifted the d-band center of Cu in Cu₁ N₃ @PCN close to the Fermi level, which boosted the adsorption and activation of CO₂ on Cu₁ N₃ , making Cu₁ N₃ @PCN efficiently convert CO₂ to CO. In contrast, Cu₁ P₃ @PCN with a much lower Cu 3d electron energy exhibited negligible CO₂ adsorption, thereby preferring H₂ formation via photocatalytic H₂ O splitting.

Protonated g-C3N4 coated Co9S8 heterojunction for photocatalytic H2O2 production

Photocatalytic H₂O₂ production is an eco-friendly technique because only H₂O, molecular O₂ and light are involved. However, it still confronts the challenges of the unsatisfactory productivity of H₂O₂ and the dependence on organic electron donors or high purity O₂, which restrict the practical application. Herein, we construct a type-II heterojunction of the protonated g-C₃N₄ coated Co₉S₈ semiconductor for photocatalytic H₂O₂ production. The ultrathin g-C₃N₄ uniformly spreads on the surface of the dispersed Co₉S₈ nanosheets by a two-step method of protonation and dip-coating, and exhibits improved photogenerated electrons transportability and e^--h⁺ pairs separation ability. The photocatalytic system can achieve a considerable productivity of H₂O₂ to 2.17 mM for 5 h in alkaline medium in the absence of the organic electron donors and pure O₂. The optimal photocatalyst also obtains the highest apparent quantum yield (AQY) of 18.10% under 450 nm of light irradiation, as well as a good reusability. The contribution of the type-II heterojunction is that the migrations of electrons and holes within the interface between g-C₃N₄ and Co₉S₈ matrix promote the separation of photocarriers, and another channel is also opened for H₂O₂ generation. The accumulated electrons in conduction band (CB) of Co₉S₈ contribute to the major channel of two-electron reduction of O₂ for H₂O₂ production. Meanwhile, the electrons in CB of g-C₃N₄ participate in the single electron reduction of O₂ as an auxiliary channel to enhance the H₂O₂ production.

Polarization Engineering of Covalent Triazine Frameworks for Highly Efficient Photosynthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Two-electron oxygen photoreduction to hydrogen peroxide (H₂ O₂ ) is seriously inhibited by its sluggish charge kinetics. Herein, a polarization engineering strategy is demonstrated by grafting (thio)urea functional groups onto covalent triazine frameworks (CTFs), giving rise to significantly promoted charge separation/transport and obviously enhanced proton transfer. The thiourea-functionalized CTF (Bpt-CTF) presents a substantial improvement in the photocatalytic H₂ O₂ production rate to 3268.1 µmol h^-1 g^-1 with no sacrificial agents or cocatalysts that is over an order of magnitude higher than unfunctionalized CTF (Dc-CTF), and a remarkable quantum efficiency of 8.6% at 400 nm. Mechanistic studies reveal the photocatalytic performance is attributed to the prominently enhanced two-electron oxygen reduction reaction by forming endoperoxide at the triazine unit and highly concentrated holes at the thiourea site. The generated O₂ from water oxidation is subsequently consumed by the oxygen reduction reaction (ORR), thereby boosting overall reaction kinetics. The findings suggest a powerful functional-groups-mediated polarization engineering method for the development of highly efficient metal-free polymer-based photocatalysts.

A Crystalline Partially Fluorinated Triazine Covalent Organic Framework for Efficient Photosynthesis of Hydrogen Peroxide

A partially fluorinated, metal-free, imine-linked two-dimensional triazine covalent organic framework (TF₅₀ -COF) photocatalyst was developed. Fluorine (F)-substituted and nonsubstituted units were integrated in equimolar amounts on the edge aromatic units, where they mediated two-electron O₂ photoreduction. F-substitution created an abundance of Lewis acid sites, which regulated the electronic distribution of adjacent carbon atoms and provided highly active sites for O₂ adsorption, and widened the visible-light-responsive range of the catalyst, while enhancing charge separation. Varying the proportion of F maximized the interlayer interactions of TF₅₀ -COF, resulting in improved crystallinity with faster carrier transfer and robust photostability. The TF₅₀ -COF catalyst demonstrates high selectivity and stability in O₂ photoreduction into H₂ O₂ , with a high H₂ O₂ yield rate of 1739 μmol h^-1  g^-1 and a remarkable apparent quantum efficiency of 5.1 % at 400 nm, exceeding the performance of previously reported nonmetal COF-based photocatalysts.

Promoted Electron Transfer and Surface Absorption by Single Nickel Atoms for Photocatalytic Cross-Coupling of Aromatic Alcohols and Aliphatic Amines under Visible Light

The preparation of imines has drawn increasing attention as they are fundamental intermediates in the production of pharmaceuticals, agricultures, and fine chemicals. Nevertheless, current approaches for imines synthesis mainly focus on thermally driven reactions which always involve the consumption of high price noble metal catalysts, expensive ligands, strong base, and harsh reaction conditions. Herein, we demonstrate single atom nickel anchored on polymeric carbon nitride (Ni-SA@PCN) in Ni-N₄ structure for visible light-promoted crossed coupling between aromatic alcohols and aliphatic amines. As expected, the Ni atoms dispersed carbon nitride demonstrates an obviously improved charge separation and transfer as reflected in UV-vis, fluorescence intensity and lifetime, photocurrent density, and electrochemical impedance characterizations. More impressively, the density functional theory (DFT) calculations also reveals that the presence of Ni atoms can dramatically accelerate the absorption of reactive substrates on the surface of PCN. The decreased absorption energy from -0.51 to -3.35 eV, associated with increased O═O bond length from 1.226 to 1.371 Å indicates a huge advantage of single Ni atom on oxygen activation. As a result, the obtained Ni-SA@PCN photocatalyst shows a prominent catalytic efficiency in imines formation with a reaction conversion of 73% and selectivity of >99%. Lastly, the photocatalytic reactions displays an excellent compatibility with various imines being achieved with high yield.

Lignin-Supported Heterogeneous Photocatalyst for the Direct Generation of H2O2 from Seawater

The development of smart and sustainable photocatalysts is in high priority for the synthesis of H₂O₂ because the global demand for H₂O₂ is sharply rising. Currently, the global market share for H₂O₂ is around 4 billion US$ and is expected to grow by about 5.2 billion US$ by 2026. Traditional synthesis of H₂O₂ via the anthraquinone method is associated with the generation of substantial chemical waste as well as the requirement of a high energy input. In this respect, the oxidative transformation of pure water is a sustainable solution to meet the global demand. In fact, several photocatalysts have been developed to achieve this chemistry. However, 97% of the water on our planet is seawater, and it contains 3.0-5.0% of salts. The presence of salts in water deactivates the existing photocatalysts, and therefore, the existing photocatalysts have rarely shown reactivity toward seawater. Considering this, a sustainable heterogeneous photocatalyst, derived from hydrolysis lignin, has been developed, showing an excellent reactivity toward generating H₂O₂ directly from seawater under air. In fact, in the presence of this catalyst, we have been able to achieve 4085 μM of H₂O₂. Expediently, the catalyst has shown longer durability and can be recycled more than five times to generate H₂O₂ from seawater. Finally, full characterizations of this smart photocatalyst and a detailed mechanism have been proposed on the basis of the experimental evidence and multiscale/level calculations.

Two-dimensional material-based functional aerogels for treating hazards in the environment: synthesis, functional tailoring, applications, and sustainability analysis

Environmental pollution is a global problem that endangers human health and ecological balance. As a new type of functional material, two-dimensional material (2DM)-based aerogel is one of the most promising candidates for pollutant detection and environmental remediation. The porous, network-like, interconnected three-dimensional (3D) structure of 2DM-based aerogels can not only preserve the characteristics of the original 2DMs, but also bring many distinct physical and chemical properties to offer abundant active sites for adsorbing and combining pollutants, thereby facilitating highly efficient monitoring and treatment of hazardous pollutants. In this review, the synthesis methods of 2DM aerogels and their broad environmental applications, including various sensors, adsorbents, and photocatalysts for the detection and treatment of pollutants, are summarized and discussed. In addition, the sustainability of 2DM aerogels compared to other water purification materials, such as activated carbon, 2DMs, and other aerogels are analyzed by the Sustainability Footprint method. According to the characteristics of different 2DMs, special focuses and perspectives are given on the adsorption properties of graphene, MXene, and boron nitride aerogels, as well as the sensing and photocatalytic properties of transition metal dichalcogenide/oxide and carbon nitride aerogels. This comprehensive work introduces the synthesis, modification, and functional tailoring strategies of different 2DM aerogels, as well as their unique characteristics of adsorption, photocatalysis, and recovery, which will be useful for the readers in various fields of materials science, nanotechnology, environmental science, bioanalysis, and others.

Modular Assembly of MOF-derived Carbon Nanofibers into Macroarchitectures for Water Treatment

The organized assembly of nanoparticles into complex macroarchitectures opens up a promising pathway to create functional materials. Here, we demonstrate a scalable strategy to fabricate macroarchitectures with high compressibility and elasticity from hollow particle-based carbon nanofibers. This strategy causes zeolitic imidazolate framework (ZIF-8)-polyacrylonitrile nanofibers to assemble into centimetre-sized aerogels (ZIF-8/NFAs) with expected shapes and tunable functions on a large scale. On further carbonization of ZIF-8/NFAs, ZIF-8 nanoparticles are transformed into a hollow structure to form the carbon nanofiber aerogels (CNFAs). The resulting CNFAs integrate the properties of zero-dimensional hollow structures, one-dimensional nanofibers, and three-dimensional carbon aerogels, and exhibit a low density of 7.32 mg cm⁻³, high mechanical strength (rapid recovery from 80% strain), outstanding adsorption capacity, and excellent photo-thermal conversion potential. These results provide a platform for the future development of macroarchitectured assemblies from nanometres to centimetres and facilitate the design of multifunctional materials.

A scalable strategy is established to generate macroarchitectures based on MOF-related nanofibers. The modular assembly of macroarchitectures with luffa-like structures exhibits high mechanical strength and low densities.

Nanospatial Charge Modulation of Monodispersed Polymeric Microsphere Photocatalysts for Exceptional Hydrogen Peroxide Production

Photocatalysis offers a sustainable strategy for hydrogen peroxide (H₂ O₂ ) production, which is an essential oxidant and emerging energy carrier in modern chemical industry. The development of polymer-based photocatalysts to produce H₂ O₂ has great potential but is limited by lower efficiency due to the limitation of light utilization and the low charge separation efficiency. Herein, a series of monodispersed mesoporous resorcinol-formaldehyde resin spheres (MRFS) are reported with a rational designed spatial charge distribution, exhibiting wide light absorption with a solar-to-chemical conversion (SCC) efficiency of 1.1%. Surface photovoltage microscopy (SPVM) measurements unraveled the charge separation in nanospace with uneven distribution of donor (D) and acceptor (A) sites. A density functional theory (DFT) calculation elucidated the origin of photogenerated electrons and holes. Moreover, MRFS demonstrates photocatalytic water oxidation ability. The findings in this work open a new avenue for the development of porous polymeric photocatalysts toward highly efficient solar energy conversion.

Graphitic carbon nitride nanosheets via acid pretreatments for promoted photocatalysis toward degradation of organic pollutants

Acid treatment serves as an effective engineering strategy to modify the structure of graphitic carbon nitride (g-C₃N₄) for enhanced metal-free photocatalysis, while their lacks a comprehensive understanding about the impacts of different acid species and acid treatment approaches on the intrinsic structure and properties of g-C₃N₄ and structure-activity relationships are ambiguous. Employing inorganic/organic acids including hydrochloric acid (HCl), nitric acid (HNO₃), acetic acid (HAc), sulphuric acid (H₂SO₄), or oxalic acid (H₂C₂O₄) as treatment acids, herein, we compare the impacts of different acid pretreatment approaches on the structure and properties of g-C₃N₄. Due to different acid-melamine interaction modes and the activation roles of various acids, the obtained g-C₃N₄ samples exhibit varied structures, physiochemical properties and photocatalytic activities. Compared with bulk graphitic carbon nitride (BCN), g-C₃N₄ prepared by acid pretreatment show enhanced photocatalytic performance on bisphenol A (BPA) degradation. The photocatalytic degradation rates of BPA by g-C₃N₄ prepared by HNO₃, HAc, H₂SO₄, H₂C₂O₄, or HCl pretreatment are about 2.2, 2.7, 2.8, 3.2 and 3.8 folds faster than that by BCN. HCl pretreatment proves to be the optimal approach, with the derived g-C₃N₄ (HTCN) showing more intact heptazine structural units, and increased specific surface area, which promote the exposure of more active sites, accelerate charge transfer, and give rise to a notable improvement in photocatalysis, eventually. Mechanistic investigations through quenching experiments and electron paramagnetic resonance (EPR) characterization unveil that superoxide ion radical (O₂^-) and photo-induced holes (h⁺) worked principally in the photodegradation reaction. This work provides new insights for the rational selection of acid types and treatment methods to synthesize metal-free carbon nitrides with improved activity for photocatalytic applications.

The challenges of using NAD+-dependent formate dehydrogenases for CO2 conversion

In recent years, CO₂ reduction and utilization have been proposed as an innovative solution for global warming and the ever-growing energy and raw material demands. In contrast to various classical methods, including chemical, electrochemical, and photochemical methods, enzymatic methods offer a green and sustainable option for CO₂ conversion. In addition, enzymatic hydrogenation of CO₂ into platform chemicals could be used to produce economically useful hydrogen storage materials, making it a win-win strategy. The thermodynamic and kinetic stability of the CO₂ molecule makes its utilization a challenging task. However, Nicotine adenine dinucleotide (NAD⁺)-dependent formate dehydrogenases (FDHs), which have high selectivity and specificity, are attractive catalysts to overcome this issue and convert CO₂ into fuels and renewable chemicals. It is necessary to improve the stability, cofactor necessity, and CO₂ conversion efficiency of these enzymes, such as by combining them with appropriate hybrid systems. However, metal-independent, NAD⁺-dependent FDHs, and their CO₂ reduction activity have received limited attention to date. This review outlines the CO₂ reduction ability of these enzymes as well as their properties, reaction mechanisms, immobilization strategies, and integration with electrochemical and photochemical systems for the production of formic acid or formate. The biotechnological applications of FDH, future perspectives, barriers to CO₂ reduction with FDH, and aspects that must be further developed are briefly summarized. We propose that constructing hybrid systems that include NAD⁺-dependent FDHs is a promising approach to convert CO₂ and strengthen the sustainable carbon bio-economy.

Plasmonic Heating-Promoted Photothermal Synthesis of α-Cyanoacrylonitriles Over Au/h-BN Catalysts

Plasmonic nanoparticle-involved materials play an essential role in the field of photothermal conversion. Herein, we report the application of photothermal heterogeneous catalysts consisting of gold nanoparticles decorated on defect-rich h-BN sheets (Au/h-BN) for the photocatalytic synthesis of α-cyanoacrylonitriles under mild conditions. It has been demonstrated the–NH₂ groups present in the defect-rich h-BN act as the catalytically active sites, while plasmonic heating from the gold nanoparticles can drive the reaction by providing local heat. Au/h-BN catalyst can work for a broad substrate scope in the synthesis of α-cyanoacrylonitriles, and a plausible –NH₂ group-involved reaction mechanism has been proposed. This work may open up new avenues in photothermal catalysis by combining plasmonic materials and catalytic sites in one system.

Unconventional, Gram-Scale Synthesis of a Molecular Dimer Organic Luminogen with Aggregation-Induced Emission

Organic luminogens have been widely used in optoelectronic devices, bioimaging, and sensing. Conventionally, the synthesis of organic luminogens requires sophisticated, multistep design, reaction, and isolation procedures. Herein, the products of the melt-phase condensation of benzoguanamine (BG; 2,4-diamino-6-phenyl-1,3,5-triazine) at 370-410 °C display interesting reaction-condition-dependent luminescence properties, including photoluminescence (PL) at a variety of wavelengths in the visible spectrum and quantum efficiencies (PLQE) of up to 58% in the powder form. With a simple and straightforward solvent washing procedure, the prominent blue luminescent component BG dimer was obtained in gram scale with >93% purity (96.5% purity after fractional sublimation). The BG dimer exhibited distinct aggregation-induced emission (AIE) properties. PL measurements indicate that the electronically excited state of the BG dimer undergoes efficient intramolecular nonradiative deactivation in room-temperature solution, leading to a significantly reduced PLQE (<0.1%) in solution. These nonradiative processes are substantially inhibited when the dimer existed in the form of crystals, solid aggregates in solution or being fixed in a rigid polymer film, resulting in a significant increase in the PLQE and lifetime. This work not only provided a new understanding for PL properties of self-condensation luminescent products but also represented an unconventional strategy for large-scale preparation of organic luminogens with high purity.

Photoinduced Self-Assembly of Carbon Nitride Quantum Dots

The study of nanocrystal self-assembly into superlattices or superstructures is of great significance in nanoscience. Carbon nitride quantum dots (CNQDs), being a promising new group of nanomaterials, however, have hardly been explored in their self-organizing behavior. Here we report of a unique irradiation-triggered self-assembly and recrystallization phenomenon of crystalline CNQDs (c-CNQDs) terminated by abundant oxygen-containing groups. Unlike the conventional self-assembly of nanocrystals into ordered superstructures, the photoinduced self-assembly of c-CNQDs resembles a "click reaction" process of macromolecules, in which the activated -OH and -NH₂ functional groups along the perimeters initiate cross-linking of adjacent QDs through a photocatalytic effect. Our findings unveil fundamental physiochemical features of CNQDs and open up new possibilities of manipulating carbon nitride nanomaterials via controlled assembly. Prospects for potential applications are discussed as well.