Dihydroxyl-Cooperative 1,2,4-Triazole-Based Ionic Liquid for Robust Reversible CO2 Absorption

The development of aqueous absorbents for CO2 capture is significantly important to reduce global industrial gas emissions through high regeneration efficiency and low energy consumption. Herein, we newly designed and prepared a dihydroxylated ionic liquid (IL) bis(2-hydroxyethyl)dimethylammonium 1,2,4-triazole ([N1,1,2OH,2OH][TZ]) for highly efficient CO2 absorption through anion-cation cooperative interactions. A superior capacity of 1.33 mol of CO2 per mol of IL and excellent reversibility have been achieved by the introduction of dihydroxy sites on the ammonium-based Tz IL. 1H and 13C nuclear magnetic resonance, Fourier transform infrared, and quantum chemical calculations demonstrate bihydroxyl-cooperative absorption of CO2 via hydrogen bond interaction between the cation and anion of the IL. The theory calculation shows that IL displays a superlow reactive absorption enthalpy, favorable to the reversible CO2 absorption, which can maintain an initial absorption capacity of 98.5% with the cycle numbers of 100, implying the facile regeneration and superlow energy consumption. Thus, the functionalized ILs toward group cooperative gas absorption and excellent reversibility may open a door to designing new materials for enhancing CO2 absorption and utilization.

Porous liquids: a novel porous medium for efficient carbon dioxide capture

Porous liquids (PLs) are the combination of porous solid material and flowing liquid, which provides alternative options to solve difficulties in the development of porous solids. With the booming development of PLs since 2015, plenty of syntheses and applications have been reported with a specific focus on gas adsorption. Given the lack of a comprehensive review, this paper reviews the application of PLs in CO2 capture. To start with, ground-breaking case studies are reviewed to help understand the progress of PLs research. Then, as a major part of this paper, studies of PLs for CO2 capture are reviewed separately. Moreover, five basic properties of porous liquids, including stability, viscosity, selectivity, porosity, capacity, and the influencing factors are systemically reviewed respectively. Furthermore, gas storage and release mechanisms in PLs are briefly outlined, and potential processing methods of PLs used for CO2 capture are discussed.

What Matters to Fabrication of Type II Porous Liquids: A Case Study on Metallocages and Bulky Ionic Liquid?

Porosity in bulky solvents can be created by the methods of dispersing and dissolving porous hosts or by their chemical adornment. And the ensuing liquids with cavities offer requisite high gas uptakes. Intriguingly, metal-organic cages (MOCs) as discrete nanoporous hosts have been utilized recently as soluble entities to obtain a series of interesting type II porous liquids (PLs). Yet, factors affecting the fabrication of type II PLs have not been disclosed. Herein, three metallocages (NUT-101, ZrT-1-NH2, and ZrT-1) with the same zirconocene nodes but different organic ligands are chosen as porous hosts and a polyethylene-glycol (PEG) linked bis-imidazolium based IL, IL(NTf2), is used as a bulky solvent. It is revealed for the first time that the generation of type II PL depends upon the flexibility of MOCs and the interaction between MOCs and solvent molecules. The maximum solubility is observed with NUT-101 (5%) in IL(NTf2) while ZrT-1-NH2 and ZrT-1 remain least soluble (0.5% and 0.2%). As a result, PL-NUT-101-5% with most intrinsic cavities shows higher CO2 uptake (0.576 mmol g-1) than PL-ZrT-1-NH2-0.5% and PL-ZrT-1-0.2% as well as those reported type II PLs.

Unveiling protic amino acid ionic liquids for the efficient capture of carbon dioxide

A series of novel protic amino acid ionic liquids (PAAILs) are designed and synthesized for the first time through acid-base neutralization and an ion exchange reaction. Among the synthesised PAAILs, the [DBNH][Maba] PAAIL has the largest CO2 absorption capacity of 0.78 mol mol-1 (0.142 g g-1) at 313.2 K. The PAAILs are found to be efficient, reversible, and selective CO2 absorbents.

Tailoring Type III Porous Ionic Liquids for Enhanced Liquid-Liquid Two-Phase Catalysis

Porous Ionic Liquids (PILs) have gained attention but facing challenges in catalysis, especially in liquid-liquid two-phase reactions due to limited catalytic sites and hydrophilicity control. This work engineered a Type III PILs (PILS-M) using zeolitic imidazolate framework-8 (ZIF-8) confined phosphomolybdic acid (HPMo) as the microporous framework and N-butyl pyridine bis(trifluoromethane sulfonyl) imide ionic liquid ([Bpy][NTf2]) as the solvent. The PILS-M not only combines the advantages of traditional ionic liquids and microporous frameworks, including excellent extraction, high dispersion of catalytically active species, remarkable stability, etc., but also can make the inner surface of ZIF-8 turned to be hydrophilic that favors the contact between aqueous hydrogen peroxide oxidant and catalytically active sites for the promotion of catalytic performance in reactive extractive desulfurization (REDS) processes of fuel oils. This study demonstrates Type III PILs' potential as catalysts for sustainable chemical processes, offering insights into versatile PILs applications in diverse fields.

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

Lead Extraction in a Functionalized and Permeable Silica-Based Porous Liquid

Silica-based porous liquids (PLs) are innovative and versatile liquid materials with a high potential, although their application is often restricted to gas sorption. In this work, we propose to evaluate their potential to extract metals. For this goal, we have adapted their synthesis to provide PLs functionalized with thiols that are expected to chelate metallic contaminants, such as lead. As the accessibility of liquids and metals to the PL's porous network is one of the key points for their application, we developed an original small-angle neutron scattering experiment to verify that the PL is permeable to polar liquids. Then, preliminary extraction tests have successfully been carried out, with an extraction of lead cations by complexation on one-third of accessible thiol groups. This work demonstrates that the extraction of metal species by a PL is possible and opens many perspectives for optimization.

Hydrophobic Porous Liquids with Controlled Cavity Size and Physico-Chemical Properties

Developing greener hydrometallurgical processes implies offering alternatives to conventional solvents used for liquid-liquid extraction (LLE) of metals. In this context, it is proposed to substitute the organic phase by a hydrophobic silica-based porous liquid (PL). Two different sulfonated hollow silica particles (HSPs) are modified with various polyethoxylated fatty amines (EthAs) forming a canopy that provides both the targeted hydrophobicity and liquefying properties. This study shows that these properties can be tuned by varying the number of ethylene oxide units in the EthA: middle-range molecular weight EthAs allow obtaining a liquid at room temperature, while too short or too long EthA leads to solid particles. Viscosity is also impacted by the density and size of the silica spheres: less viscous PLs are obtained with small low-density spheres, while for larger spheres (c.a. 200 nm) the density has a less significant impact on viscosity. According to this approach, hydrophobic PLs are successfully synthesized. When contacted with an aqueous phase, the most hydrophobic PLs obtained allow a subsequent phase separation. Preliminary extraction tests on three rare earth elements have further shown that functionalization of the PL is necessary to observe metal extraction.

Charge Shielding-Oriented Design of Zinc-Based Nanoparticle Liquids for Controlled Nanofabrication

Metal-containing nanoparticles possess nanoscale sizes, but the exploitation of their nanofeatures in nanofabrication processes remains challenging. Herein, we report the realization of a class of zinc-based nanoparticle liquids and their potential for applications in controlled nanofabrication. Utilizing the metal-core charge shielding strategy, we prepared nanoparticles that display glass-to-liquid transition behavior with glass transition temperature far below room temperature (down to -50.9 °C). Theoretical calculations suggest the outer surface of these unusual nanoparticles is almost neutral, thus leading to interparticle interactions weak enough to give them liquefaction characteristics. Such features endow them with extraordinarily high dispersibility and excellent film-forming capabilities. Twenty-two types of nanoparticles synthesized by this strategy have all shown good lithographic properties in the mid-ultraviolet, electron beam, or extreme ultraviolet light, and these nanoparticle liquids have achieved controlled top-down nanofabrication with predesigned 18 or 16 nm patterns. This proposed strategy is synthetically scalable and structurally extensible and is expected to inspire the design of entirely new forms of nanomaterials.

Dynamic Cages-Towards Nanostructured Smart Materials

The interest in capsular assemblies such as dynamic organic and coordination cages has blossomed over the last decade. Given their chemical and structural variability, these systems have found applications in diverse fields of research, including energy conversion and storage, catalysis, separation, molecular recognition, and live-cell imaging. In the exploration of the potential of these discrete architectures, they are increasingly being employed in the formation of more complex systems and smart materials. This Review highlights the most promising pathways to overcome common drawbacks of cage systems (stability, recovery) and discusses the most promising strategies for their hybridization with systems featuring various dimensionalities. Following the description of the most recent advances in the fabrication of zero to three-dimensional cage-based systems, this Review will provide the reader with the structure-dependent relationship between the employed cages and the properties of the materials.

Revolutionizing Porous Liquids: Stabilization and Structural Engineering Achieved by a Surface Deposition Strategy

Facile approaches capable of constructing stable and structurally diverse porous liquids (PLs) that can deliver high-performance applications are a long-standing, captivating, and challenging research area that requires significant attention. Herein, a facile surface deposition strategy is demonstrated to afford diverse type III-PLs possessing ultra-stable dispersion, external structure modification, and enhanced performance in gas storage and transformation by leveraging the expeditious and uniform precipitation of selected metal salts. The Ag(I) species-modified zeolite nanosheets are deployed as the porous host to construct type III-PLs with ionic liquids (ILs) containing bromide anion , leading to stable dispersion driven by the formation of AgBr nanoparticles. The as-afforded type-III PLs display promising performance in CO2 capture/conversion and ethylene/ethane separation. Property and performance of the as-produced PLs can be tuned by the cation structure of the ILs, which can be harnessed to achieve polarity reversal of the porous host via ionic exchange. The surface deposition procedure can be further extended to produce PLs from Ba(II)-functionalized zeolite and ILs containing [SO4 ]2- anion driven by the formation of BaSO4 salts. The as-produced PLs are featured by well-maintained crystallinity of the porous host, good fluidity and stability, enhanced gas uptake capacity, and attractive performance in small gas molecule utilization.

Advances in the research of carbon-, silicon-, and polymer-based superhydrophobic nanomaterials: Synthesis and potential application

With the rapid development of science and technology, superhydrophobic nanomaterials have become one of the hot topics from various subjects. Due to their distinct properties, such as superhydrophobicity, anti-icing and corrosion resistance, superhydrophobic nanomaterials are widely used in industry, agriculture, defense, medicine and other fields. Hence, the development of superhydrophobic materials with superior performance, economical, practical features, and environment-friendly properties are extremely important for industrial development and environmental protection. Aimed to provide a scientific and theoretical basis for the subsequent study on the preparation of composite superhydrophobic nanomaterials, this paper reviewed the latest progress in the research of superhydrophobic surface wettability and the theory of superhydrophobicity, summarized and analyzed the latest development of carbon-based, silicon-based and polymer-based superhydrophobic nanomaterials in terms of their synthesis, modification, properties and structure sizes (diameters), discussed the problems and unique application prospects of carbon-based, silicon-based and polymer-based superhydrophobic nanomaterials.

A porous metal-organic cage liquid for sustainable CO2 conversion reactions

Porous liquids are fluids with the permanent porosity, which can overcome the poor gas solubility limitations of conventional porous solid materials for three phase gas-liquid-solid reactions. However, preparation of porous liquids still requires the complicated and tedious use of porous hosts and bulky liquids. Herein, we develop a facile method to produce a porous metal-organic cage (MOC) liquid (Im-PL-Cage) by self-assembly of long polyethylene glycol (PEG)-imidazolium chain functional linkers, calixarene molecules and Zn ions. The Im-PL-Cage in neat liquid has permanent porosity and fluidity, endowing it with a high capacity of CO₂ adsorption. Thus, the CO₂ stored in an Im-PL-Cage can be efficiently converted to the value-added formylation product in the atmosphere, which far exceeds the porous MOC solid and nonporous PEG-imidazolium counterparts. This work offers a new method to prepare neat porous liquids for catalytic transformation of adsorbed gas molecules.

Photoresponsive Type III Porous Liquids

Porous materials are the subject of extensive research because of potential applications in areas such as gas adsorption and molecular separations. Until recently, most porous materials were solids, but there is now an emerging class of materials known as porous liquids. The incorporation of intrinsic porosity or cavities in a liquid can result in free-flowing materials that are capable of gas uptakes that are significantly higher than conventional non-porous liquids. A handful of porous liquids have also been investigated for gas separations. Until now, the release of gas from porous liquids has relied on molecular displacement (e.g., by adding small solvent molecules), pressure or temperature swings, or sonication. Here, we explore a new method of gas release which involves photoisomerisable porous liquids comprising a photoresponsive MOF dispersed in an ionic liquid. This results in the selective uptake of CO2 over CH4 and allows gas release to be controlled by using UV light.

Practical considerations in the design and use of porous liquids

The possibility of creating well-controlled empty space within liquids is conceptually intriguing, and from an application perspective, full of potential. Since the concept of porous liquids (PLs) arose several years ago, research efforts in this field have intensified. This review highlights the design, synthesis, and applicability of PLs through a thorough examination of the current state-of-the-art. Following a detailed examination of the fundamentals of PLs, we examine the different synthetic approaches proposed to date, discuss the nature of PLs, and their pathway from the laboratory to practical application. Finally, possible challenges and opportunities are outlined.

Porous liquids - the future is looking emptier

The development of microporosity in the liquid state is leading to an inherent change in the way we approach applications of functional porosity, potentially allowing access to new processes by exploiting the fluidity of these new materials. By engineering permanent porosity into a liquid, over the transient intermolecular porosity in all liquids, it is possible to design and form a porous liquid. Since the concept was proposed in 2007, and the first examples realised in 2015, the field has seen rapid advances among the types and numbers of porous liquids developed, our understanding of the structure and properties, as well as improvements in gas uptake and molecular separations. However, despite these recent advances, the field is still young, and with only a few applications reported to date, the potential that porous liquids have to transform the field of microporous materials remains largely untapped. In this review, we will explore the theory and conception of porous liquids and cover major advances in the area, key experimental characterisation techniques and computational approaches that have been employed to understand these systems, and summarise the investigated applications of porous liquids that have been presented to date. We also outline an emerging discovery workflow with recommendations for the characterisation required at each stage to both confirm permanent porosity and fully understand the physical properties of the porous liquid.

Type II porous ionic liquid based on metal-organic cages that enables L-tryptophan identification

Porous liquids with chemical separation properties are quite well-studied in general, but there is only a handful of reports in the context of identification and separation of non-gaseous molecules. Herein, we report a Type II porous ionic liquid composed of coordination cages that exhibits exceptional selectivity towards L-tryptophan (L-Trp) over other aromatic amino acids. A previously known class of anionic organic-inorganic hybrid doughnut-like cage (HD) is dissolved in trihexyltetradecylphosphonium chloride (THTP_Cl). The resulting liquid, HD/THTP_Cl, is thereby composed of common components, facile to prepare, and exhibit room temperature fluidity. The permanent porosity is manifested by the high-pressure isotherm for CH4 and modeling studies. With evidence from time-dependent amino acid uptake, competitive extraction studies and molecular dynamic simulations, HD/THTP_Cl exhibit better selectivity towards L-Trp than other solid state sorbents, and we attribute it to not only the intrinsic porosity of HD but also the host-guest interactions between HD and L-Trp. Specifically, each HD unit is filled with nearly 5 L-Trp molecules, which is higher than the L-Trp occupation in the structure unit of other benchmark metal-organic frameworks.

Transforming Porous Silica Nanoparticles into Porous Liquids with Different Canopy Structures for CO2 Capture

Porous liquids (PLs) have both liquid fluidity and solid porosity, thereby offering a variety of applications, such as gas sorption and separation, homogeneous catalysis, energy storage, and so forth. In this research, canopies with varying structures were utilized to modify porous silica nanoparticles to develop Type I PLs. According to experimental results, the molecular weight of canopies should be high enough to maintain the porous materials in the liquid state at room temperature. Characterization results revealed that PL_1_M2070 and PL_1_AC1815 displayed low viscosity and good fluidity. Both low temperature and high pressure positively influenced CO₂ capacity. The cavity occupancy resulted in poorer sorption capacity of PLs with branched canopies in comparison with that with linear canopies. Furthermore, the sorption capacity of PL_1_M2070 was 90.5% of the original CO₂ sorption capacity after 10 sorption/desorption cycles, indicating excellent recyclability.

Post-synthetic modification of UiO-66-OH toward porous liquids for CO2 capture

A rather simple and feasible strategy to construct MOF porous liquids with low viscosities for CO2 capture.

Composite Porous Liquid for Recyclable Sequestration, Storage and In Situ Catalytic Conversion of Carbon Dioxide at Room Temperature

Permanent pores combined with fluidity renders flow processability to porous liquids otherwise not seen in porous solids. Although porous liquids have been utilized for sequestration of different gases and their separation, there is still a dearth of studies for deploying in situ chemical reactions to convert adsorbed gases into utility chemicals. Here, we show the design and development of a new type of solvent-less and hybrid (meso-)porous liquid composite, which, as demonstrated for the first time, can be used for in situ carbon mineralization of adsorbed CO₂ . The recyclable porous liquid composite comprising polymer-surfactant modified hollow silica nanorods and carbonic anhydrase enzyme not only sequesters (5.5 cm³  g^-1 at 273 K and 1 atm) and stores CO₂ but is also capable of driving an in situ enzymatic reaction for hydration of CO₂ to HCO₃ ^- ion, subsequently converting it to CaCO₃ due to reaction with pre-dissolved Ca²⁺ . Light and electron microscopy combined with X-ray diffraction reveals the nucleation and growth of calcite and aragonite crystals. Moreover, the liquid-like property of the porous composite material can be harnessed by executing the same reaction via diffusion of complimentary Ca²⁺ and HCO₃ ^- ions through different compartments separated by an interfacial channel. These studies provide a proof of concept of deploying chemical reactions within porous liquids for developing utility chemical from adsorbed molecules.

Porous Metal-Organic Framework Liquids for Enhanced CO2 Adsorption and Catalytic Conversion

The unique applications of porous metal-organic framework (MOF) liquids with permanent porosity and fluidity have attracted significant attention. However, fabrication of porous MOF liquids remains challenging because of the easy intermolecular self-filling of the cavity or the rapid settlement of porous hosts in hindered solvents that cannot enter their pores. Herein, we report a facile strategy for the fabrication of a MOF liquid (Im-UiO-PL) by surface ionization of an imidazolium-functionalized framework with a sterically hindered poly(ethylene glycol) sulfonate (PEGS) canopy. The Im-UiO-PL obtained in this way has a CO₂ adsorption approximately 14 times larger than that of pure PEGS. Distinct from a porous MOF solid counterpart, the stored CO₂ in Im-UiO-PL can be slowly released and efficiently utilized to synthesize cyclic carbonates in the atmosphere. This is the first example of the use of a porous MOF liquid as a CO₂ storage material for catalysis. It offers a new method for the fabrication of unique porous liquid MOFs with functional behaviors in various fields of gas adsorption and catalysis.

Engineering Permanent Porosity into Liquids

The possibility of engineering well-defined pores into liquid materials is fascinating from both a conceptual and an applications point of view. Although the concept of porous liquids was proposed in 2007, these materials had remained hypothetical due to the technical challenges associated with their synthesis. Over the past five years, however, reports of the successful construction of porous liquids based on existing porous scaffolds, such as coordination cages, organic cages, metal-organic frameworks, porous carbons, zeolites, and porous polymers, have started to emerge. Here, the focus is on these early reports of porous liquids as prototypes in the field, classified according to the previously defined types of porous liquids. Particular attention will be paid to design strategies and structure-property relationships. Porous liquids have already exhibited promising applications in gas storage, transportation, and chemical separations. Thus, they show great potential for use in the chemical industry. The challenges of preparation, scale-up, volatility, thermal and chemical stability, and competition with porous solids will also be discussed.

Type 3 Porous Liquids for the Separation of Ethane and Ethene

We assess the potential for formulating a porous liquid that could be used as a selective solvent for the separation of ethane and ethene. Ethane-ethene separation is performed on very large scales by cryogenic distillation, but this uses large amounts of energy. Solvents that are selective to ethane or ethene could potentially enable more efficient liquid-based separation processes to be developed, but to date such solvents have been elusive. Here, Type 3 porous liquids, which consist of microporous solids dispersed in size-excluded liquid phases, were tailored toward the separation of ethane and ethene. A high selectivity for ethene over ethane (25.6 at 0.8 bar) and a high capacity was achieved for zeolite AgA dispersed in an Ag-containing ionic liquid. Unusually for liquid phases, the selectivity for ethane over ethene (2.55 at 0.8 bar) could also be achieved using either the metal-organic framework (MOF) Cu(Qc)₂ (Qc = quinoline-5-carboxylate) dispersed in sesame oil or ZIF-7 in sesame oil, the latter showing gated uptake. The efficiency of the Cu(Qc)₂ synthesis was increased by developing a mechanochemical method. The regeneration of Cu(Qc)₂ in sesame oil and ZIF-7 in sesame oil was also demonstrated, suggesting that these or similar porous liquids could potentially be applied in cyclic separation processes.

Photocatalytic hydroxylation of benzene to phenol over organosilane-functionalized FeVO4 nanorods

Surface silylation of FeVO4 with organosilane functional groups is a promising strategy to realize kinetic control of photocatalytic benzene hydroxylation reactions.

Coordination cages as permanently porous ionic liquids

Porous materials are widely used in industry for applications that include chemical separations and gas scrubbing. These materials are typically porous solids, although the liquid state can be easier to manipulate in industrial settings. The idea of combining the size and shape selectivity of porous domains with the fluidity of liquids is a promising one and porous liquids composed of functionalized organic cages have recently attracted attention. Here we describe an ionic-liquid, porous, tetrahedral coordination cage. Complementing the gas binding observed in other porous liquids, this material also encapsulates non-gaseous guests-shape and size selectivity was observed for a series of isomeric alcohols. Three gaseous chlorofluorocarbon guests, trichlorofluoromethane, dichlorodifluoromethane and chlorotrifluoromethane, were also shown to be taken up by the liquid coordination cage with an affinity that increased with their size. We hope that these findings will lead to the synthesis of other porous liquids whose guest-uptake properties may be tailored to fulfil specific functions.

Type 3 porous liquids based on non-ionic liquid phases - a broad and tailorable platform of selective, fluid gas sorbents

We describe a series of Type 3 porous liquids, denoted "T3PLs", based on a wide range of microporous solids including MOFs, zeolites and a porous organic polymer (PAF-1). These solids are dispersed in various non-ionic liquid phases (including silicone oils, triglyceride oils, and polyethylene glycols) which have a range of structures and properties, and that are in many cases sterically excluded from the pores of the solids. Several stable dispersions with high gas uptakes are obtained. We show how these dispersions can be tailored toward important gas separation processes (CO2/CH4, C2H4/C2H6) and applications that require biocompatibility.

A polyether amine modified metal organic framework enhanced the CO2 adsorption capacity of room temperature porous liquids

A room-temperature MOF-based porous liquid was prepared and showed an outstanding CO₂ uptake capacity.

Porous polycarbene-bearing membrane actuator for ultrasensitive weak-acid detection and real-time chemical reaction monitoring

Soft actuators with integration of ultrasensitivity and capability of simultaneous interaction with multiple stimuli through an entire event ask for a high level of structure complexity, adaptability, and/or multi-responsiveness, which is a great challenge. Here, we develop a porous polycarbene-bearing membrane actuator built up from ionic complexation between a poly(ionic liquid) and trimesic acid (TA). The actuator features two concurrent structure gradients, i.e., an electrostatic complexation (EC) degree and a density distribution of a carbene-NH3 adduct (CNA) along the membrane cross-section. The membrane actuator performs the highest sensitivity among the state-of-the-art soft proton actuators toward acetic acid at 10-6 mol L-1 (M) level in aqueous media. Through competing actuation of the two gradients, it is capable of monitoring an entire process of proton-involved chemical reactions that comprise multiple stimuli and operational steps. The present achievement constitutes a significant step toward real-life application of soft actuators in chemical sensing and reaction technology.