A perylene diimide probe for NIR-II fluorescence imaging guided photothermal and type I/type II photodynamic synergistic therapy

Phototherapy has garnered significant attention in the past decade. Photothermal and photodynamic synergistic therapy combined with NIR fluorescence imaging has been one of the most attractive treatment options because of the deep tissue penetration, high selectivity and excellent therapeutic effect. Benefiting from the superb photometrics and ease of modification, perylene diimide (PDI) and its derivatives have been employed as sensing probes and therapeutic agents in the biological and biomedical research fields, and exhibiting excellent potential. Herein, we reported the development of a novel organic small-molecule phototherapeutic agent, PDI-TN. The absorption of PDI-TN extends into the NIR region, which provides feasibility for NIR phototherapy. PDI-TN overcomes the traditional Aggregation-Caused Quenching (ACQ) effect and exhibits typical characteristics of Aggregation-Induced Emission (AIE). Subsequently, PDI-TN NPs were obtained by using an amphiphilic triblock copolymer F127 to encapsulate PDI-TN. Interestingly, the PDI-TN NPs not only exhibit satisfactory photothermal effects, but also can generate O2•- and 1O2 through type I and type II pathways, respectively. Additionally, the PDI-TN NPs emit strong fluorescence in the NIR-II region, and show outstanding therapeutic potential for in vivo NIR-II fluorescence imaging. To our knowledge, PDI-TN is the first PDI derivative used for NIR-II fluorescence imaging-guided photodynamic and photothermal synergistic therapy, which suggests excellent potential for future biological/biomedical applications.

Metal-Free Catalytic Formation of a Donor-Acceptor-Donor Molecule and Its Lewis Acid-Adduct Singlet Diradical with High-Efficient NIR-II Photothermal Conversion

We have synthesized a quinone-incorporated bistriarylamine donor-acceptor-donor (D-A-D) semiconductor 1 by B(C6F5)3 (BCF) catalyzed C-H/C-H cross coupling via radical ion pair intermediates. Coordination of Lewis acids BCF and Al(ORF)3 (RF=C(CF3)3) to the semiconductor 1 afforded diradical zwitterions 2 and 3 by integer electron transfer. Upon binding to Lewis acids, the LUMO energy of 1 is significantly lowered and the band gap of the semiconductor is significantly narrowed from 1.93 eV (1) to 1.01 eV (2) and 1.06 eV (3). 2 and 3 are rare near-infrared (NIR) diradical dyes with broad absorption both centered around 1500 nm. By introducing a photo BCF generator, 2 can be generated by light-dependent control. Furthermore, the integer electron transfer process can also be reversibly regulated via the addition of CH3CN. In addition, the temperature of 2 sharply increased and reached as high as 110 °C in 10 s upon the irradiation of near-infrared-II (NIR-II) laser (1064 nm, 0.7 W cm-2), exhibiting a fast response to laser. It displays excellent photothermal stability with a photothermal (PT) conversion efficiency of 62.26 % and high-quality PT imaging.

Pyridinium-Yne Click Polymerization: A Facile Strategy toward Functional Poly(Vinylpyridinium Salt)s with Multidrug-Resistant Bacteria Killing Ability

Polymeric materials with antibacterial properties hold great promise for combating multidrug-resistant bacteria, which pose a significant threat to public health. However, the synthesis of most antibacterial polymers typically involves complicated and time-consuming procedures. In this study, we demonstrate a simple and efficient strategy for synthesizing functional poly(vinylpyridinium salt)s via pyridinium-yne click polymerization. This click polymerization could proceed with high atom economy under mild conditions without any external catalyst, yielding soluble and thermally stable poly(vinylpyridinium salt)s with satisfactory molecular weights and well-defined structures in excellent yields. Additionally, the incorporation of luminescent units such as fluorene, tetraphenylethylene, and triphenylamine into the polymer backbone confers excellent aggregation-enhanced emission properties upon the resulting polymers, rendering them suitable for bacterial staining. Moreover, the existence of pyridinium salt imparts intrinsic antibacterial activity against multidrug-resistant bacteria to the polymers, enabling them to effectively inhibit wound bacterial infection and significantly expedite the healing process. This work not only provides an efficient method to prepare antibacterial polymers, but also opens up the possibility of various applications of polymers in healthcare and other antibacterial fields.

Supramolecular Switch for the Regulation of Antibacterial Efficacy of Near-Infrared Photosensitizer

The global antibiotic resistance crisis has drawn attention to the development of treatment methods less prone to inducing drug resistance, such as antimicrobial photodynamic therapy (aPDT). However, there is an increasing demand for new photosensitizers capable of efficiently absorbing in the near-infrared (NIR) region, enabling antibacterial treatment in deeper sites. Additionally, advanced strategies need to be developed to avert drug resistance stemming from prolonged exposure. Herein, we have designed a conjugated oligoelectrolyte, namely TTQAd, with a donor-acceptor-donor (D-A-D) backbone, enabling the generation of reactive oxygen species (ROS) under NIR light irradiation, and cationic adamantaneammonium groups on the side chains, enabling the host-guest interaction with curcubit[7]uril (CB7). Due to the amphiphilic nature of TTQAd, it could spontaneously form nanoassemblies in aqueous solution. Upon CB7 treatment, the positive charge of the cationic adamantaneammonium group was largely shielded by CB7, leading to a further aggregation of the nanoassemblies and a reduced antibacterial efficacy of TTQAd. Subsequent treatment with competitor guests enables the release of TTQAd and restores its antibacterial effect. The reversible supramolecular switch for regulating the antibacterial effect offers the potential for the controlled release of active photosensitizers, thereby showing promise in preventing the emergence of drug-resistant bacteria.

Conjugated Oligoelectrolyte with DNA Affinity for Enhanced Nuclear Imaging and Precise DNA Quantification

Precise DNA quantification and nuclear imaging are pivotal for clinical testing, pathological diagnosis, and drug development. The detection and localization of mitochondrial DNA serve as crucial indicators of cellular health. We introduce a novel conjugated oligoelectrolyte (COE) molecule, COE-S3, featuring a planar backbone composed of three benzene rings and terminal side chains. This unique amphiphilic structure endows COE-S3 with exceptional water solubility, a high quantum yield of 0.79, and a significant fluorescence Stokes shift (λex = 366 nm, λem = 476 nm), alongside a specific fluorescence response to DNA. The fluorescence intensity correlates proportionally with DNA concentration. COE-S3 interacts with double-stranded DNA (dsDNA) through an intercalation binding mode, exhibiting a binding constant (K) of 1.32 × 106 M-1. Its amphiphilic nature and strong DNA affinity facilitate its localization within mitochondria in living cells and nuclei in apoptotic cells. Remarkably, within 30 min of COE-S3 staining, cell vitality can be discerned through real-time nuclear fluorescence imaging of apoptotic cells. COE-S3's high DNA selectivity enables quantitative intracellular DNA analysis, providing insights into cell proliferation, differentiation, and growth. Our findings underscore COE-S3, with its strategically designed, shortened planar backbone, as a promising intercalative probe for DNA quantification and nuclear imaging.

Organic Photothermal Materials Obtained Using Thermally Activated Delayed Fluorescence Design Principles

Organic small molecules with high photothermal conversion efficiencies that absorb near-infrared light are desirable for photothermal therapy due to their improved biocompatibility compared to inorganic materials and their ability to absorb light in the biological transparency window (650-1350 nm). Here we report three donor-acceptor organic materials DM-ANDI, O-ANDI, and S-ANDI that show high photothermal conversion efficiencies of 46-68 % with near-infrared absorption. The design of these molecules is based on the rational modification of a thermally activated delayed fluorescence material to favour a low photoluminescence quantum yield by reducing HOMO-LUMO overlap. Encapsulating these materials into either neat nanoparticles or aggregated organic dots modulates their photothermal conversion efficiencies, and also facilitates dispersion in water.

Croconaine conjugated cationic polymeric nanoparticles for NIR enhanced bacterial killing

Light-triggered treatment approach has been regarded as an effective option for sterilization due to noninvasiveness, limited drug resistance, and minimized adverse effects. Herein, we designed and synthesized a functionalized cationic polymer, CR-PQAC, with croconaine bridging agent and quaternary ammonium groups for photothermal enhanced antimicrobial therapy under near-infrared irradiation. The quaternary ammonium group on the pendent chain endowing CR-PQAC the ability to effectively bind to bacteria. The CR-PQAC could self-assembles into micellar nanoparticles in aqueous solution, which exhibited strong absorption in the near-infrared (NIR) region, excellent photostability, and photothermal conversion efficiency of up to 43.8 %. Notably, the CR-PQAC nanoparticles presented remarkable antibacterial activity against both methicillin-resistant Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) bacteria with 808 nm laser irradiation. Moreover, the developed CR-PQAC has negligible dark cytotoxicity and good hemolytic compatibility against mammalian cells. Both in vitro and in vivo studies have demonstrated that the desirable antibacterial efficacy of CR-PQAC was obtained. Therefore, the proposed CR-PQAC may be a promising antimicrobial agent for NIR-enhanced killing bacterial.

A Synergistic Antibacterial Study of Copper-Doped Polydopamine on Ti3C2Tx Nanosheets with Enhanced Photothermal and Fenton-like Activities

In response to the trend of drug-resistant and super bacteria, the existing single antibacterial methods are not sufficient to kill bacteria, and the development of multifunctional antibacterial nanomaterials is urgent. Our study aims to construct copper-doped polydopamine-coated Ti3C2Tx (CuPDA@Ti3C2Tx) with an enhanced photothermal property and Fenton-like activity. The nanocomposite hydrogel consisting of CuPDA@Ti3C2Tx and alginate can improve the antioxidant activity of two-dimensional MXene nanosheets by coating them with a thin layer of PDA nanofilm. Meanwhile, Cu ions are adsorbed through the coordination of PDA-rich oxygen-containing functional groups and amino groups. Calcium ions were further used to crosslink sodium alginate to obtain antibacterial hydrogel materials with combined chemotherapy and photothermal therapy properties. The photothermal conversion efficiency of CuPDA@Ti3C2Tx is as high as 57.7% and the antibacterial rate of Escherichia coli reaches 96.12%. The photothermal effect leads to oxidative stress in bacteria, increases cell membrane permeability, and a high amount of ROS and copper ions enter the interior of the bacteria, causing protein denaturation and DNA damage, synergistically leading to bacterial death. Our study involves a multifunctional synergistic antibacterial nanodrug platform, which is conducive to the development of high-performance antibacterial agents and provides important research ideas for solving the problem of drug-resistant bacteria.

Capsule Shedding and Membrane Binding Enhanced Photodynamic Killing of Gram-Negative Bacteria by a Unimolecular Conjugated Polyelectrolyte

The development of new antimicrobial agents to treat infections caused by Gram-negative bacteria is of paramount importance due to increased antibiotic resistance worldwide. Herein, we show that a water-soluble porphyrin-cored hyperbranched conjugated polyelectrolyte (PorHP) exhibits high photodynamic bactericidal activity against the Gram-negative bacteria tested, including a multidrug-resistant (MDR) pathogen, while demonstrating low cytotoxicity toward mammalian cells. Comprehensive analyses reveal that the antimicrobial activity of PorHP proceeds via a multimodal mechanism by effective bacterial capsule shedding, strong bacterial outer membrane binding, and singlet oxygen generation. Through this multimodal antimicrobial mechanism, PorHP displays significant performance for Gram-negative bacteria with >99.9% photodynamic killing efficacy. Overall, PorHP shows great potential as an antimicrobial agent in fighting the growing threat of Gram-negative bacteria.

Confining Prepared Ultrasmall Nanozymes Loading ATO for Lung Cancer Catalytic Therapy/Immunotherapy

Nanozymes with inherent enzyme-mimicking catalytic properties combat malignant tumor progression via catalytic therapy, while the therapeutic efficacy still needs to be improved. In this work, ultrasmall platinum nanozymes (nPt) in a confined domain of a wormlike pore channel in gold nanobipyramidal-mesoporous silica dioxide nanocomposites, producing nanozyme carriers AP-mSi with photoenhanced peroxidase ability, are innovatively synthesized. Afterward, based on the prepared AP-mSi, a lung-cancer nanozymes probe (AP-HAI) is ingeniously produced by removing the SiO2 template, modifying human serum albumin, and loading atovaquone molecules (ATO) as well as IR780. Under NIR light irradiation, inner AuP and IR780 collaborate for photothermal process, thus facilitating the peroxidase-like catalytic process of H2 O2 . Additionally, loaded ATO, a cell respiration inhibitor, can impair tumor respiration metabolism and cause oxygen retention, hence enhancing IR780's photodynamic therapy (PDT) effectiveness. As a result, IR780's PDT and nPt nanozymes' photoenhanced peroxidase-like ability endow probes a high ROS productivity, eliciting antitumor immune responses to destroy tumor tissue. Systematic studies reveal that the obvious reactive oxygen species (ROS) generation is obtained by the strategy of using nPt nanozymes and reducing oxygen consumption by ATO, which in turn enables lung-cancer synergetic catalytic therapy/immunogenic-cell-death-based immunotherapy. The results of this work would provide theoretical justification for the practical use of photoenhanced nanozyme probes.

NIR light-driven pure organic Janus-like nanoparticles for thermophoresis-enhanced photothermal therapy

Photothermal therapy (PTT) represents a promising noninvasive tumor therapeutic modality, but the current strategies for enhancing photothermal effect have been mainly based on promoting thermal relaxation or suppressing radiative dissipation process of excited energy, leaving little room for further improvement in photothermal effect. Herein, as a proof of concept, we report the thermophoresis-enhanced photothermal effect with pure organic Janus-like nanoparticles (Janus-like NPs) for PTT. The Janus-like NPs are eccentrically loaded with compactly J-aggregated photothermal molecules (DMA-BDTO), which show red-shifted absorption wavelength and inhibited radiative decay as compared to individual molecules. Under NIR irradiation, the asymmetric heat generation at particle surface endows Janus-like NPs the active thermophoresis, which further increases collisions and converts kinetic energy into thermal energy, and Janus-like NPs exhibit significantly elevated temperature as compared to conventional NPs with homogenously distributed DMA-BDTO. Both in vitro and in vivo results confirm such thermophoresis-enhanced photothermal effect for improved PTT. Our new strategy of thermophoresis-enhanced photothermal effect shall open new insights for improving photothermal-related tumor therapy.

Multifunctional Antibacterial Nanoplatform Bi2WO6:Nd3+/Yb3+/Er3+@MoS2 with Self-Monitoring Photothermal and Photodynamic Treatment

Synergistic therapy combining photothermal therapy and photodynamic therapy is considered to be a promising approach to treat cancer, but the precise temperature control of deep tissue remains a great challenge in achieving effective treatment. Herein, a two-dimensional Bi2WO6:Nd3+/Yb3+/Er3+@MoS2 nanoplatform with photothermal and photodynamic functions was constructed, where semiconductor MoS2 serves as both a photothermal agent and a photosensitizer. The photothermal conversion performance and the reactive oxygen species generation capacity of the nanoplatform were validated under the irradiation of 808 nm laser; meanwhile, the two sets of luminescence intensity ratios (IYb3+/INd3+ and IEr3+/INd3+) in the biological window region were selected as near-infrared temperature probes to monitor the heat generated during the photosynergistic process in real time. The feasibility of nanoplatform as an intratissue temperature probe and antibacterial agent was further assessed by vitro experiments, which provides an idea for designing multifunctional photosynergistic therapy nanoplatform.

A novel donor-acceptor structured diketopyrrolopyrrole-based conjugated polymer synthesized by direct arylation polycondensation (DArP) for highly efficient antimicrobial photothermal therapy

A novel donor (D)-acceptor (A) structured conjugated polymer (PDPP-TP), which contains two alternating D-A pairs, namely thiophene (T)-diketopyrrolopyrrole (DPP) and thiophenen (T)-thieno[3,4-b]pyrazine (TP) along the main chain of the polymer, was synthesized by direct arylation polycondensation (DArP) for a highly efficient photothermal antibacterial treatment. The hydrophilic PDPP-TP-based nanoparticles (PTNPs) with a hydration diameter of about 120 nm were obtained by self-assembly using DSPE-mPEG₂₀₀₀ as the polymer matrix. PTNPs show strong near-infrared (NIR) absorbance with a λ_max at 910 nm (ε = 2.25 × 10⁴ L mol^-1 cm^-1) and NIR light-triggered photoactivity with a high photothermal conversion efficiency (PTCE) of 52.8% under 880 nm laser irradiation. Keeping the merits of excellent biocompatibility and photostability, PTNPs exhibited remarkable bacterial inhibition efficiency of almost 100% against Gram-negative E. coli and Gram-positive S. aureus with the help of an 880 nm laser (0.7 W cm^-2, 6 min), demonstrating its great potential as photothermal materials with a broad spectrum of activity for the effective treatment of microbial infections.

Membrane-intercalating conjugated oligoelectrolytes

By acting as effective biomimetics of the lipid bilayers, membrane-intercalating conjugated oligoelectrolytes (MICOEs) can spontaneously insert themselves into both synthetic lipid bilayers and biological membranes. The modular and intentional molecular design of MICOEs enable a range of applications, such as bioproduction, biocatalysis, biosensing, and therapeutics. This tutorial review provides a structural evolution of MICOEs, which originated from the broader class of conjugated molecules, and analyses the drivers behind this evolutionary process. Various representative applications of MICOEs, accompanied by insights into their molecular design principles, will be reviewed separately. Perspectives on the current challenges and opportunities in research on MICOEs will be discussed at the end of the review to highlight their potential as unconventional and value-added materials for biological systems.

Thermal-Responsive MXene-DNA Hydrogel for Near-Infrared Light Triggered Localized Photothermal-Chemo Synergistic Cancer Therapy

Stimuli-responsive DNA hydrogels are promising candidates for cancer treatment, as they not only possess biocompatible and biodegradable 3D network structures as highly efficient carriers for therapeutic agents but also are capable of undergoing programmable gel-to-solution transition upon external stimuli to achieve controlled delivery. Herein, a promising platform for highly efficient photothermal-chemo synergistic cancer therapy is established by integrating DNA hydrogels with Ti₃ C₂ T_X -based MXene as a photothermal agent and doxorubicin (DOX) as a loaded chemotherapeutic agent. Upon the irradiation of near-infrared light (NIR), temperature rise caused by photothermal MXene nanosheets triggers the reversible gel-to-solution transition of the DOX-loaded MXene-DNA hydrogel, during which the DNA duplex crosslinking structures unwind to release therapeutic agents for efficient localized cancer therapy. Removal of the NIR irradiation results in the re-formation of DNA duplex structures and the hydrogel matrix, and the recombination of free DOX and adaptive hydrogel transformations can also be achieved. As demonstrated by both in vitro and in vivo models, the MXene-DNA hydrogel system, with excellent biocompatibility and injectability, dynamically NIR-triggered drug delivery, and enhanced drug uptake under mild hyperthermia conditions, exhibits efficient localized cancer treatment with fewer side effects to the organisms.

Biocompatible non-leachable antimicrobial polymers with a nonionic hyperbranched backbone and phenolic terminal units

This work aimed to develop biocompatible non-leachable antimicrobial polymers without ionic structures. A series of nonionic hyperbranched polymers (HBPs) with an isatin-based backbone and phenolic terminal units were synthesized and characterized. The molecular structures and thermal properties of the obtained HBPs were characterized by SEC, NMR, FTIR, TGA and DSC analyses. Disk diffusion assay revealed significant antibacterial activity of the obtained phenolic HBPs against nine different pathogenic bacteria. The presence of a methoxy or long alkyl group close to the phenolic unit enhanced the antibacterial effect against certain Gram positive and negative bacteria. The obtained nonionic HBPs were blended in polyester poly(hexamethylene terephthalate) films, which showed no noticeable leakage after being immersed in water for 5 days. Finally, these HBPs showed no cytotoxicity effect to MG-63 osteoblast-like human cells according to MTT analysis, and negligible hemolytic effect.

pH-Activatable Organic Nanoparticles for Efficient Low-Temperature Photothermal Therapy of Ocular Bacterial Infection

Low-temperature photothermal therapy (PTT) systems constructed by integrating organic photothermal agents with other bactericidal components that initiate bacterial apoptosis at low hyperthermia possess a promising prospect. However, these multicomponent low-temperature PTT nanoplatforms have drawbacks in terms of the tedious construction process, suboptimal synergy effect of diverse antibacterial therapies, and high laser dose needed, compromising their biosafety in ocular bacterial infection treatment. Herein, a mild PTT nanotherapeutic platform is formulated via the self-assembly of a pH-responsive phenothiazinium dye. These organic nanoparticles with photothermal conversion efficiency up to 84.5% necessitate only an ultralow light dose of 36 J/cm² to achieve efficient low-temperature photothermal bacterial inhibition at pH 5.5 under 650 nm laser irradiation. In addition, this intelligent mild photothermal nanoplatform undergoes negative to positive charge reversion in acid biofilms, exhibiting good penetration and highly efficient elimination of drug-resistant E. coli biofilms under photoirradiation. Further in vivo animal tests demonstrated efficient bacterial elimination and inflammatory mitigation as well as superior biocompatibility and biosafety of the photothermal nanoparticles in ocular bacterial infection treatment. Overall, this efficient single-component mild PTT system featuring simple construction processes holds great potential for wide application and clinical transformation.

Materials and device design for advanced phototherapy systems

Phototherapy has recently emerged as a promising solution for cancer treatment due to its multifunctionality and minimal invasiveness. Notwithstanding the limited penetration depth of light through skin, the ability of photopharmaceutical device systems to deliver light to desired lesions is important. The device system deploys advanced biocompatible materials and fabrication technologies for electronics, and eventually enables more efficient phototherapy. In this review, we focus on diverse optical electronics to illuminate the lesion site with light. Then, moving on to the phototherapy, we highlight photo-thermal therapy with light absorbing materials, photo-activated chemotherapy with light sensitive materials, and photo-dynamic therapy using photosensitizers. Furthermore, we introduce a drug delivery system that can deliver these photopharmaceutical agents spatiotemporally to the tumor site. To this end, we provide a general overview of materials and devices for phototherapy and discuss critical issues and pending limitations of such phototherapy.

Novel conjugated small molecule-based nanoparticles for NIR-II photothermal antibacterial therapy

Single organic small molecule-based nanoparticles (CNPs) with strong responses within the NIR-II (1000-1350 nm) bio-window were prepared, and successfully applied as a highly efficient photothermal antibacterial agent for the first time. CNPs exhibit an outstanding bacteria inhibition efficiency of almost 100% against Staphylococcus aureus (S. aureus) with a high photothermal conversion efficiency (PTCE) of circa 49% under NIR-II laser irradiation (1064 nm) for 8 min.

Organic photosensitizers for antimicrobial phototherapy

Microbial infectious diseases, especially those caused by new and antibiotic-resistant pathogenic microbes, have become a significant threat to global human health. As an antibiotic-free therapy, phototherapy is a promising approach to treat microbial infections due to its spatiotemporal selectivity, non-invasiveness, minimal side effects, and broad antimicrobial spectrum. Although organic photosensitizer-based antimicrobial phototherapy has been extensively studied over the last decade, there has been no specific review article on this topic yet. It is important and timely to summarize recent research progress in this field. This tutorial review highlights the concept and significance of phototherapy and summarizes innovative types of organic photosensitizers with design strategies to deal with microbial infections. In addition, examples of organic antimicrobial photosensitizers, including antibacterial photosensitizers, antiviral photosensitizers, and antifungal photosensitizers are discussed. Finally, current challenges and future directions of organic photosensitizer-based phototherapy for clinical antimicrobial applications are presented. We believe that this tutorial review will provide general guidance for the future development of efficient photosensitizers and encourage preclinical and clinical studies for phototherapy-mediated antimicrobial treatments.

Diradical-Featured Organic Small-Molecule Photothermal Material with High-Spin State in Dimers for Ultra-Broadband Solar Energy Harvesting

Organic materials with radical characteristics are gaining increasing attention, due to their potential implications in highly efficient utilization of solar energy. Manipulating intermolecular interactions is crucial for tuning radical properties, as well as regulating their absorption bands, and thus improving the photothermal conversion efficiency. Herein, a diradical-featured organic small-molecule croconium derivative, CR-DPA-T, is reported for highly efficient utilization of solar energy. Upon aggregation, CR-DPA-T exists in dimer form, stabilized by the strong intermolecular π-π interactions, and exhibits a rarely reported high-spin state. Benefiting from the synergic effects of radical characteristics and strong intermolecular π-π interactions, CR-DPA-T powder absorbs broadly from 300 to 2000 nm. In-depth investigations with transient absorption analysis reveal that the strong intermolecular π-π interactions can promote nonradiative relaxation by accelerating internal conversion and facilitating intermolecular charge transfer (ICT) between dimeric molecules to open up faster internal conversion pathways. Remarkably, CR-DPA-T powder demonstrates a high photothermal efficiency of 79.5% under 808 nm laser irradiation. By employing CR-DPA-T as a solar harvester, a CR-DPA-T-loaded flexible self-healing poly(dimethylsiloxane) (H-PDMS) film, named as H-PDMS/CR-DPA-T self-healing film, is fabricated and employed for solar-thermal applications. These findings provide a feasible guideline for developing highly efficient diradical-featured organic photothermal materials.

Single Probe-Based Chemical-Tongue Sensor Array for Multiple Bacterial Identification and Photothermal Sterilization in Real Time

Simple and efficient identification of multiple bacteria and sterilization in real time is of considerable significance for clinical diagnostics and quality control in food. Herein, a novel chemical-tongue sensor array with 3,3',5,5'-tetramethylbenzidine (TMB) as a single probe was developed for bacterial identification and photothermal elimination. The synthesized bimetallic palladium/platinum nanoparticles (Pd/Pt_NPs) present excellent catalytic capability that can catalyze TMB into oxidized TMB (oxTMB) with four feature absorption peaks. Bacteria have different ability on inhibiting the reaction between TMB and Pd/Pt_NPs. With the absorbance intensity of oxTMB at the four feature peaks as readout, nine kinds of bacteria including two drug-resistant bacteria can be successfully distinguished via linear discriminant analysis. Remarkably, oxTMB exhibits excellent photothermal properties and can effectively kill bacteria in real time under near-infrared laser irradiation. The strategy of selecting TMB as a single probe simplifies the experimental operation and reduces the time cost. Furthermore, the developed sensing system was used to promote the wound healing process of MRSA-infected mice in vivo. The investigation provides a promising simple and efficient strategy for bacterial identification and sterilization with a universal platform, which has great potential application in clinical diagnosis and therapy.

Phthalocyanine-Assembled "One-For-Two" Nanoparticles for Combined Photodynamic-Photothermal Therapy of Multidrug-Resistant Bacteria

The treatment of diseases caused by drug-resistant bacterial infections urgently requires new types of broad-spectrum antimicrobial materials. Herein, we introduce a supramolecular self-assembly, NanoPcN, which realizes the combination of type I photodynamic activity and photothermal effects by modifying zinc(II) phthalocyanine with a 3-(dimethylamino) phenoxy group. Antibacterial experiments demonstrate that this "one-for-two" property endows NanoPcN with excellent antimicrobial efficacy, not only against Gram-positive and Gram-negative bacteria but also against multidrug-resistant bacteria. An ultralow concentration of NanoPcN (50 nM) almost completely inhibited the growth of methicillin-resistant Staphylococcus aureus upon 655 nm laser irradiation (0.5 W/cm²) for 2 min, and the antibacterial effect was significantly stronger than that of the known photosensitizers methylene blue and tetraphenylporphyrin tetrasulfonic acid. Thus, the construction of "one-for-two" materials through a simple molecular structure modification paves a feasible way for the development of effective broad-spectrum antibacterial agents.

A facile design of thio-perylenediimides with controllable fluorescent, photodynamic and photothermal effects towards cancer theranostics

A series of thionated perylenediimides with modulating phototheranostic modalities have been synthesized by a one-pot method for multiple anti-cancer applications. Compared to the initial and 4-tert-butyl phenol-substituted fluorescent perylenediimide, the obtained monothionated perylenediimide became photodynamic. With the increase of thionation degree, tetrathionated perylenediimide changed into an optimal photothermal agent.

A Facile Strategy of Boosting Photothermal Conversion Efficiency through State Transformation for Cancer Therapy

Improving photothermal conversion efficiency (PCE) is critical to facilitate therapeutic performance during photothermal therapy (PTT). However, current strategies of prompting PCE always involve complex synthesis or modification of photothermal agents, thereby significantly inhibiting the practical applications and fundamental understanding of photothermal conversion. A facile strategy is herein present for boosting PCE by transforming photothermal agents from aggregated state to dispersed state. Compared to aggregated state, the developed photothermal agents with semiconducting nature can rotate freely in dispersed state, which allows for an efficient nonradiative dissipation through twisted intramolecular charge transfer (TICT) effect, consequentially offering excellent photothermal performance. Noteworthy, the state transformation can be achieved by virtue of releasing photothermal molecules from nanoparticles on the basis of a pH-responsive polymer nanocarrier, and the PCE is elevated from 43% to 60% upon changing the pH values from 7.4 to 5.0. Moreover, the nanoparticle disassembly and state transformation behaviors can also smoothly proceed in lysosome of cancer cells, demonstrating a distinct photothermal therapeutic performance for cancer ablation. It is hoped that this strategy of transforming state to boost PCE would be a new platform for practical applications of PTT technique.

Boosting Photothermal Theranostics via TICT and Molecular Motions for Photohyperthermia Therapy of Muscle-Invasive Bladder Cancer

The development of photothermal agents with high photothermal conversion efficiency (PCE) can help to reduce drug and laser dosage, but still remains a big challenge. Herein, a novel approach is reported to design photothermal agents with high PCE values by promoting nonradiative heat generation processes through the cooperation of twisted intramolecular charge transfer (TICT) and molecular motions. Within the designed molecule 2DMTT-BBTD, the tetraphenylethenes act as molecular rotors, the long alkyl chain grafted thiophene helps to twist the molecular geometry to facilitate TICT state formation and preserve molecular motions in aggregate, while the strong electron-withdrawing BBTD unit enhances TICT effect. 2DMTT-BBTD exhibits NIR-absorption and a high PCE value of 74.8% under 808 nm laser irradiation. Gambogic acid (GA) which surmounts tumor cell thermotolerance by inhibiting heat shock protein 90 (HSP90) expression is coloaded into the nanoparticles, RGD peptide is further introduced to the nanoparticle surface to improve tumor accumulation. The resultant nanoparticles facilitate the effective low-temperature hyperthermia therapy of muscle-invasive bladder cancer (MIBC) with minimal damage to surrounding heathy tissues. This work delivers a new design concept for development of highly efficient photothermal agents, which also provides a safer approach for noninvasive treatment of MIBC and other malignant tumors.

Integrated endotoxin-adsorption and antibacterial properties of platelet-membrane-coated copper silicate hollow microspheres for wound healing

Serious infection caused by drug-resistant gram-negative bacteria and their secreted toxins (e.g., lipopolysaccharide) is a serious threat to human health. Thus, treatment strategies that efficiently kill bacteria and reducing the impact of their toxins simultaneously are urgently required. Herein, a novel antibacterial platform composed of a mesoporous copper silicate microsphere (CSO) core and a platelet membrane (PM) shell was prepared (CSO@PM). CSO@PM specifically targets bacteria owing to formyl peptide receptors on the PM and, combined with photothermal therapy (PTT), exhibits highly effective bacter icidal activity. Importantly, CSO@PM can adsorb lipopolysaccharide secreted by gram-negative bacteria, resulting in inflammation reduction. Thus, CSO@PM stimulates re-epithelialization and granulation-tissue formation, promoting wound healing. Moreover, this antibacterial platform exhibits no obvious toxicity at all the test concentrations in vitro and in vivo. Thus, CSO@PM exhibits a robust antibacterial effect and a strong toxin-adsorption capacity, facilitating the clinical treatment of many bacterial infections and the development of next-generation antibacterial nanoagents.

Photochemical Synthesis of Nonplanar Small Molecules with Ultrafast Nonradiative Decay for Highly Efficient Phototheranostics

There has been much recent progress in the development of photothermal agents (PTAs) for biomedical and energy applications. Synthesis of organic PTAs typically involves noble metal catalysts and high temperatures. On the other hand, photochemical synthesis, as an alternative and green chemical technology, has obvious merits such as low cost, energy efficiency, and high yields. However, photochemical reactions have rarely been employed for the synthesis of PTAs. Herein, a facile and high-yield photochemical reaction is exploited for synthesizing nonplanar small molecules (NSMs) containing strong Michler's base donors and a tricyanoquinodimethane acceptor as high-performance PTAs. The synthesized NSMs show interesting photophysical properties including good absorption for photons of over 1000 nm wavelength, high near-infrared extinction coefficients, and excellent photothermal performance. Upon assembling the NSMs into nanoparticles (NSMN), they exhibit good biocompatibility, high photostability, and excellent photothermal conversion efficiency of 75%. Excited-state dynamic studies reveal that the NSMN has ultrafast nonradiative decay after photoexcitation. With these unique properties, the NSMN achieves efficient in vivo photoacoustic imaging and photothermal tumor ablation. This work demonstrates the superior potential of photochemical reactions for the synthesis of high-performance molecular PTAs.

Vacancy-Enhanced Photothermal Killing of Bacteria Mediated by Graphene Oxide

With the emergence of antibiotic resistance, the development of efficient antimicrobial agents has become increasingly important. Graphene oxide (GO) has been used as an antibacterial agent, but how to realize and improve the antibacterial properties of GO is still required critically. Herein, we prepared two GO samples, abbreviated as GO-V11 and GO-V9. Positron annihilation spectra showed that they possessed predominantly V_CCCCCCCCCCC (V11C) and V_CCCCCCCCC (V9C) carbon vacancies, respectively. Their photothermal antibacterial properties were measured against Gram-negative Escherichia coli (E. coli) and Gram-positive Bacillus subtilis (B. subtilis) by using colony-forming unit and liquid optical density assays. GO-V9 displayed a higher photothermal antibacterial efficiency toward the two bacteria than GO-V11 because GO-V9 had a higher photothermal conversion efficiency (PTCE) (57.3%) than GO-V11 (42.5%). To reveal the difference in their PTCEs and antibacterial efficiencies, their energy band structures were tested with density functional theory calculations. The different vacancies changed the energy band structure from the indirect band gap of GO-V11 to the quasi-metallic band gap of GO-V9. The quasi-metallic band gap showed the higher PTCE, so we revealed the importance of the band gap of GO for its antibacterial mechanism. Tuning the vacancy properties is promising for improving the photothermal antibacterial efficiency.

Multi-Channel Optical Device for Solar-Driven Bacterial Inactivation under Real-Time Temperature Feedback

Solar-driven photothermal antibacterial devices have attracted a lot of interest due to the fact that solar energy is one of the cleanest sources of energy in the world. However, conventional materials have a narrow absorbance band, resulting in deficient solar harvesting. In addition, lack of knowledge on temperature change in these devices during the photothermal process has also led to a waste of energy. Here, we presented an elegant multi-channel optical device with a multilayer structure to simultaneously address the above-mentioned issues in solar-driven antibacterial devices. In the photothermal channel, semiconductor IrO₂ -nanoaggregates exhibited higher solar absorbance and photothermal conversion efficiency compared with nanoparticles. In the luminescence channel, thermal-sensitive Er-doped upconversion nanoparticles were utilized to reflect the microscale temperature in real-time. The bacteria were successfully inactivated during the photothermal effect under solar irradiation with temperature monitoring. This study could provide valuable insight for the development of smart photothermal devices for solar-driven photothermal bacterial inactivation in the future.

Molecular engineering to boost the photothermal effect of conjugated oligomer nanoparticles

Photothermal therapy has great potential in the treatment of diseases; however, the photothermal property is a key factor limiting the therapeutic effect of photothermal materials. Most strategies to improve the photothermal performance of photothermal materials focus on increasing their photothermal conversion efficiency (PCE) by promoting the non-radiative transition process. However, a strong ability to absorb light is also a significant factor to enhance the photothermal performance of materials because it determines the amount of acquired energy to transform to heat. Therefore, in this work, we utilized molecular engineering to introduce ethynyl into the molecular structure of conjugated molecules to significantly enhance their ability to absorb light and improve their photothermal performance. The M2-NPs made of the conjugated oligomer named M2 with ethynyl exhibited a two-fold greater mass extinction coefficient (30.26 L g^-1 cm^-1) than that of nanoparticles M1-NPs with a similar structure but no ethynyl (15.34 L g^-1 cm^-1). Furthermore, M2-NPs could kill 97% of bacteria at a concentration of 7.0 μg mL^-1, which is less than that of M1-NPs (13.0 μg mL^-1). In addition, M2-NPs could successfully treat the infected wounds in mice with good biosafety. This provides a new idea for effectively improving the photothermal performance of photothermal materials via molecular design and inspires the further development of novel superior photothermal agents.

Strategies for maximizing photothermal conversion efficiency based on organic dyes

Photothermal therapy (PTT) has emerged as a promising therapeutic approach for tumor control and ablation. Attention has focused on exploring advanced organic photothermal agents (OPTAs), with advantages of easy modification, adjustable photophysical and photochemical properties, good compatibility, and inherent biodegradability. However, few detailed studies on how to maximally channelize nonradiative heat generation from the viewpoint of the photothermal conversion mechanism have been reported. Thus, here we assimilate and elaborate on several available action mechanisms to maximize the photothermal conversion efficiency (PCE) of organic dyes. Moreover, we also propose several potential challenges that require substantial future work to address.

Small Molecular NIR-II Fluorophores for Cancer Phototheranostics

Phototheranostics integrates deep-tissue imaging with phototherapy (containing photothermal therapy and photodynamic therapy), holding great promise in early diagnosis and precision treatment of cancers. Recently, second near-infrared (NIR-II) fluorescence imaging exhibits the merits of high accuracy and specificity, as well as real-time detection. Among the NIR-II fluorophores, organic small molecular fluorophores have shown superior properties in the biocompatibility, variable structure, and tunable emission wavelength than the inorganic NIR-II materials. What's more, some small molecular fluorophores also display excellent cytotoxicity when illuminated with the NIR laser. This review summarizes the progress of small molecular NIR-II fluorophores with different central cores for cancer phototheranostics in the past few years, focusing on the molecular structures and phototheranostic performances. Furthermore, challenges and prospects of future development toward clinical translation are discussed.

•

Phototheranostics combines diagnostic imaging with phototherapy, showing broad applications in the early diagnosis and precise treatment of tumors

•

Small molecular NIR-II fluorophores with good biocompatibility, tunable structure, high imaging quality, and excellent phototoxicity, have shown great potential for cancer phototheranostics

•

Small molecular NIR-II fluorophores with different central cores for cancer phototheranostics are summarized, highlighting the design strategies and phototheranostic performances

•

Challenges and prospects of future development toward clinical translation are discussed

Small Molecular NIR-II Fluorophores for Cancer Phototheranostics

Phototheranostics integrates deep-tissue imaging with phototherapy (containing photothermal therapy and photodynamic therapy), holding great promise in early diagnosis and precision treatment of cancers. Recently, second near-infrared (NIR-II) fluorescence imaging exhibits the merits of high accuracy and specificity, as well as real-time detection. Among the NIR-II fluorophores, organic small molecular fluorophores have shown superior properties in the biocompatibility, variable structure, and tunable emission wavelength than the inorganic NIR-II materials. What's more, some small molecular fluorophores also display excellent cytotoxicity when illuminated with the NIR laser. This review summarizes the progress of small molecular NIR-II fluorophores with different central cores for cancer phototheranostics in the past few years, focusing on the molecular structures and phototheranostic performances. Furthermore, challenges and prospects of future development toward clinical translation are discussed.

Highly Effective Inactivation of SARS-CoV-2 by Conjugated Polymers and Oligomers

In the present study, we examined the inactivation of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by synthetic conjugated polymers and oligomers developed in our laboratories as antimicrobials for bacteria, fungi, and nonenveloped viruses. The results show highly effective light-induced inactivation with several of these oligomers and polymers including irradiation with near-UV and visible light. In the best case, one oligomer induced a 5-log reduction in pfu/mL within 10 min. In general, the oligomers are more active than the polymers; however, the polymers are active with longer wavelength visible irradiation. Although not studied quantitatively, the results show that in the presence of the agents at concentrations similar to those used in the light studies, there is essentially no dark inactivation of the virus. Because three of the five materials/compounds examined are quaternary ammonium derivatives, this study indicates that conventional quaternary ammonium antimicrobials may not be active against SARS-CoV-2. Our results suggest several applications involving the incorporation of these materials in wipes, sprays, masks, and clothing and other personal protection equipment that can be useful in preventing infections and the spreading of this deadly virus and future outbreaks from similar viruses.

Highly Effective Inactivation of SARS-CoV-2 by Conjugated Polymers and Oligomers

The current Covid-19 Pandemic caused by the highly contagious SARS-CoV-2 virus has proven extremely difficult to prevent or control. Currently there are few treatment options and very few long-lasting disinfectants available to prevent the spread. While masks and protective clothing and social distancing may offer some protection, their use has not always halted or slowed the spread. Several vaccines are currently undergoing testing; however there is still a critical need to provide new methods for inactivating the virus before it can spread and infect humans. In the present study we examined the inactivation of SARS-CoV-2 by synthetic conjugated polymers and oligomers developed in our laboratories as antimicrobials for bacteria, fungi and non-enveloped viruses. Our results show that we can obtain highly effective light induced inactivation with several of these oligomers and polymers including irradiation with near-UV and visible light. With both the oligomers and polymers, we can reach several logs of inactivation with relatively short irradiation times. Our results suggest several applications involving the incorporation of these materials in wipes, sprays, masks and clothing and other Personal Protection Equipment (PPE) that can be useful in preventing infections and the spreading of this deadly virus and future outbreaks from similar viruses.

Fast and High-Throughput Evaluation of Photodynamic Effect by Monitoring Specific Protein Oxidation with MALDI-TOF Mass Spectrometry

In antibacterial practices by photodynamic treatment, bacteria are incubated with photosensitizers and then oxidized to death by generating reactive oxygen species (ROS) under light irradiation. Generally, Luria-Bertani (LB) agar colony is a conventional method to evaluate the photodynamic effect. However, this method is time consuming, easily disturbed by pollutants, and limited to the analysis of a pure bacteria sample. Herein, we introduce a novel method of photodynamic effect evaluation through in situ detection of specific protein oxidation by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) with only 1 μL of sample in a fast (less than 1 min per sample) and high-throughput (up to 384 samples per run) way. The oxidation rates of specific proteins stayed highly consistent with bactericidal rates and thus MALDI-TOF MS might be able to replace the LB agar colony to evaluate the photodynamic effect. With the present method, several experimental conditions including different photosensitizer types, dosage controls, and different illumination times were easily screened to optimize photodynamic effect. Photodynamic effects of various bacteria species, cancer cells, and even mixture samples were also evaluated. The results demonstrate the promising application of MALDI-TOF MS in evaluating the photodynamic effect of each component in a mixture sample without any separation or purification, which could not be achieved by the traditional LB agar colony method.

Bacteria responsive polyoxometalates nanocluster strategy to regulate biofilm microenvironments for enhanced synergetic antibiofilm activity and wound healing

Backgroud: Nowadays, biofilms that are generated as a result of antibiotic abuse cause serious threats to global public health. Such films are the primary factor that contributes to the failure of antimicrobial treatment. This is due to the fact that the films prevent antibiotic infiltration, escape from innate immune attacks by phagocytes and consequently generate bacterial resistance. Therefore, exploiting novel antibacterial agents or strategies is extremely urgent.

Methods: Herein, we report a rational construction of a novel biofilm microenvironment (BME)-responsive antibacterial platform that is based on tungsten (W)-polyoxometalate clusters (POMs) to achieve efficient bactericidal effects.

Results: On one hand, the acidity and reducibility of a BME could lead to the self-assembly of POMs to produce large aggregates, which favor biofilm accumulation and enhance photothermal conversion under near-infrared (NIR) light irradiation. On the other hand, reduced POM aggregates with BME-induced photothermal-enhanced efficiency also exhibit surprisingly high peroxidase-like activity in the catalysis of bacterial endogenous hydrogen peroxide (H₂O₂) to produce abundant reactive oxygen species (ROS). This enhances biofilm elimination and favors antibacterial effects. Most importantly, reduced POMs exhibit the optimal peroxidase-like activity in an acidic BME.

Conclusion: Therefore, in addition to providing a prospective antibacterial agent, intelligent acid/reductive dual-responsive POMs will establish a new representative paradigm for the areas of healthcare with minimal side effects.

Mechanical penetration of β-lactam-resistant Gram-negative bacteria by programmable nanowires

β-Lactam-resistant (BLR) Gram-negative bacteria that are difficult or impossible to treat are causing a global health threat. However, the development of effective nanoantibiotics is limited by the poor understanding of changes in the physical nature of BLR Gram-negative bacteria. Here, we systematically explored the nanomechanical properties of a range of Gram-negative bacteria (Salmonella, Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae) with different degrees of β-lactam resistance. Our observations indicated that the BLR bacteria had cell stiffness values almost 10× lower than that of β-lactam-susceptible bacteria, caused by reduced peptidoglycan biosynthesis. With the aid of numerical modeling and experimental measurements, we demonstrated that these stiffness findings can be used to develop programmable, stiffness-mediated antimicrobial nanowires that mechanically penetrate the BLR bacterial cell envelope. We anticipate that these stiffness-related findings will aid in the discovery and development of novel treatment strategies for BLR Gram-negative bacterial infections.

Polymerization-induced photothermy: A non-donor-acceptor approach to highly effective near-infrared photothermal conversion nanoparticles

Photothermal conversion nanoagents based on conjugated polymers (CPs) are attracting increasing attention for in vivo disease theranostics and high-performing ones are in urgent pursuit. Herein, we report a new and non-donor-acceptor approach to photothermal conversion CPs that combine several merits including low bandgaps, strong near-infrared absorption, low intersystem crossing rate and non-emissive nature. Three CPs based on 6,7; 6',7'-fused isoindigos (nIIDs), i.e., P2IIDV, P3IIDV and P4IIDV that have optical bandgaps of 1.30, 1.22 and 1.17 eV, respectively, are synthesized. The nanoparticles (NPs) of the CPs in water are prepared via nanocoprecipitation, which are non-fluorescent due to the rapid intramolecular twisting in the CP backbone within NPs, enabling most of the excitation energy flow to generate heat. The photothermal conversion efficiencies of the NPs as measured under irradiation at 808, 880 and 980 nm are 62.4%, 40.5% and 15.8% for P2IIDV, 65.1%, 41.0% and 38.9% for P3IIDV and 71.5%, 48.9% and 41.7% for P4IIDV, which are significantly higher than indocyanine green and many popularly reported photothermal conversion materials. In vivo studies using xenograft 4T1 tumor-bearing mouse model demonstrate that the P4IIDV NPs can serve as a rather effective photothermal conversion nanoagent for enhanced photoacoustic imaging and photothermal therapy of tumors.

In vivo photothermal inhibition of methicillin-resistant Staphylococcus aureus infection by in situ templated formulation of pathogen-targeting phototheranostics

Bacterial infection has caused a serious threat to human public health. Methicillin-resistant Staphylococcus aureus (MRSA) is a representative drug-resistant bacterium, which is difficult to eradicate completely, resulting in high infection probability with severe mortality. Herein, pathogen-targeting phototheranostic nanoparticles, Van-OA@PPy, are developed for efficient elimination of MRSA infection. Van-OA@PPy nanoparticles are fabricated from the in situ templated formation of polypyrrole (PPy) in the presence of ferric ions (Fe³⁺) and a polymer template, hydrophilic poly(2-hydroxyethyl methacrylate-co-N,N-dimethyl acrylamide), P(HEMA-co-DMA). PPy nanoparticles are further coated with vancomycin conjugated oleic acid (Van-OA) to afford the resultant pathogen-targeting Van-OA@PPy. A high photothermal conversion efficiency of ∼49.4% is achieved. MRSA can be efficiently killed due to sufficient nanoparticle adhesion and fusion with MRSA, followed by photothermal therapy upon irradiation with an 808 nm laser. Remarkable membrane damage of MRSA is observed, which contributes greatly to the inhibition of MRSA infection. Furthermore, the nanoparticles have high stability and good biocompatibility without causing any detectable side effects. On the other hand, residual Fe³⁺ and PPy moieties in Van-OA@PPy endow the nanoparticles with magnetic resonance (MR) imaging and photoacoustic (PA) imaging potency, respectively. The current strategy has the potential to inspire further advances in precise diagnosis and efficient elimination of MRSA infection in biomedicine.