A Photoinduced Reversible Phase Transition in a Dipeptide Supramolecular Assembly

Light-triggered AND logic tetrapeptide dynamic covalent assembly

We demonstrate light-triggered dynamic covalent assembly of a linear short tetrapeptide containing two terminal cysteine residues in an AND logic manner. A photobase generator is introduced to accomplish light-mediated pH regulation to increase the reduction potential of thiols in the tetrapeptide, which activates its oxidative polymerization through disulfide bonds. Interestingly, it is elucidated that under light irradiation, mere co-existence of photobase generator and the oxidizing agent permits the polymerization performance of this tetrapeptide. Hence, a light-triggered AND logic dynamic covalent assembly of a tetrapeptide is achieved. Further, upon redox response, the reversible aggregation and disaggregation can be transformed for numerous times due to the dynamic covalent feature of disulfide bond. As a comparison, no assembly occurs for a short peptide containing one terminal cysteine residue under the same stimuli condition. This work offers a new approach to remotely control programmable molecular assembly of short linear peptides based on dynamic covalent bond, holding great potential in wide bioapplications.

Reversibly Tuning the Viscosity of Peptide-Based Solutions Using Visible Light

Light can be used to design stimuli-responsive systems. We induce transient changes in the assembly of a low molecular weight gelator solution using a merocyanine photoacid. Through our approach, reversible viscosity changes can be achieved via irradiation, delivering systems where flow can be controlled non-invasively on demand.

Cell-Like Synthetic Supramolecular Soft Materials Realized in Multicomponent, Non-/Out-of-Equilibrium Dynamic Systems

Living cells are complex, nonequilibrium supramolecular systems capable of independently and/or cooperatively integrating multiple bio-supramolecules to execute intricate physiological functions that cannot be accomplished by individual biomolecules. These biological design strategies offer valuable insights for the development of synthetic supramolecular systems with spatially controlled hierarchical structures, which, importantly, exhibit cell-like responses and functions. The next grand challenge in supramolecular chemistry is to control the organization of multiple types of supramolecules in a single system, thus integrating the functions of these supramolecules in an orthogonal and/or cooperative manner. In this perspective, the recent progress in constructing multicomponent supramolecular soft materials through the hybridization of supramolecules, such as self-assembled nanofibers/gels and coacervates, with other functional molecules, including polymer gels and enzymes is highlighted. Moreover, results show that these materials exhibit bioinspired responses to stimuli, such as bidirectional rheological responses of supramolecular double-network hydrogels, temporal stimulus pattern-dependent responses of synthetic coacervates, and 3D hydrogel patterning in response to reaction-diffusion processes are presented. Autonomous active soft materials with cell-like responses and spatially controlled structures hold promise for diverse applications, including soft robotics with directional motion, point-of-care disease diagnosis, and tissue regeneration.

The Synthesis, Structure, and Dielectric Properties of a One-Dimensional Hydrogen-Bonded DL-α-Phenylglycine Supramolecular Crown-Ether-Based Inclusion Compound

A novel hydrogen-bonded supramolecular crown-ether-based inclusion compound, [(DL-α-Phenylglycine)(18-crown-6)]+[(CoCl4)0.5]-(1), was obtained via evaporation in a methanolic solution at room temperature using DL-α-phenylglycine, 18-crown-6, cobalt chloride (CoCl2), and hydrochloric acid. Its structure, thermal properties, and electrical properties were characterized via elemental analysis, single-crystal X-ray diffraction, variable-temperature infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and variable temperature-variable frequency dielectric constant testing. The compound was a monoclinic crystal system in the C2 space group at low temperature (100 K) and room temperature (293 K). Analysis of the single crystal structure showed that [(CoCl4)0.5]- presented an edge-sharing ditetrahedral structure in the disordered state, while the protonated DL-α-phenylglycine molecule in the disordered state and intramolecular hydroxyl group (-OH) underwent dynamic rocking, causing a significant stretching motion of the O-H···Cl-type one-dimensional hydrogen bond chain. This resulted in dielectric anomalies in the three axes of the crystal, thus showing significant dielectric anisotropy.

Long-Lived Photoacid-Doped Conducting Composites Induce Photocurrent for Efficient Wound Healing

Electrical stimulation is an effective strategy for facilitating wound healing. However, it is hindered by unwieldy electrical systems. In this study, a light-powered dressing based on long-lived photoacid generator (PAG)-doped polyaniline composites is used, which can generate a photocurrent under visible light irradiation to interact with the endogenous electric field and facilitate skin growth. Light-controlled proton binding and dissociation result in oxidation and reduction of the polyaniline backbone, inducing charge transfer to generate a photocurrent. Due to the rapid intramolecular photoreaction of PAG, a long-lived proton-induced localized acidic environment is formed, which protects the wound from microbial infection. In summary, a simple and effective therapeutic strategy is introduced for light-powered and biocompatible wound dressings that show great potential for wound treatment.

The first peptide derivatives of dioxybiphenyl-bridged spiro cyclotriphosphazenes: In vitro cytotoxicity activities and DNA damage studies

In this study, we aimed to synthesize new peptide-substituted cyclotriphosphazenes from a series of tyrosine-based peptides and dioxyphenyl-substituted spirocyclotriphosphazenes, and to evaluate their in vitro cytotoxicity and genotoxicity activities. Genotoxicity studies were conducted to understand whether the cytotoxic compounds cause cell death through DNA damage. The structures of the novel series of phosphazenes were characterized by FT-IR, elemental analysis, MS, 1D (³¹P, ¹H, and ¹³C-APT NMR), and 2D (HETCOR) NMR spectroscopic techniques. In vitro cytotoxic activities were carried out against human breast (MCF-7), ovarian (A2780), prostate (PC-3), colon (Caco-2) cancer cell lines and human normal epithelial cell line (MCF-10A) at different concentrations by using an MTT assay. The compounds showed considerable reductions in cell viability against all human cancer cell lines. Especially, the compounds exhibited notable effects in A2780 cell lines (p < 0.05). The IC₅₀ values of the compounds in the A2780 cell line were calculated to be 1.914 µM for TG, 20.21 µM for TV, 20.45 µM for TA, 4.643 µM for TP, 5.615 µM for BTG, 1.047 µM for BTV, 27.02 µM for BTA, 0.7734 µM for BTP, 21.5 µM for DTG, 1.65 µM for DTV, 2.89 µM for DTA and 4.599 µM for DTP. DNA damage studies of the compounds were conducted by the comet assay method using tail length, tail density, olive tail moment, head length, and head density parameters, and the results showed that the cell death occurred through DNA damage mechanism. In a nutshell, these compounds show promising cytotoxic effects and can be considered powerful candidate molecules for pharmaceutical applications.

Controlling DNA nanodevices with light-switchable buffers

Control over synthetic DNA-based nanodevices can be achieved with a variety of physical and chemical stimuli. Actuation with light, however, is as advantageous as difficult to implement without modifying DNA strands with photo-switchable groups. Herein, we show that DNA nanodevices can be controlled using visible light in photo-switchable aqueous buffer solutions in a reversible and highly programmable fashion. The strategy presented here is non-invasive and allows the remote control with visible light of complex operations of DNA-based nanodevices such as the reversible release/loading of cargo molecules.

Hemostatic effects of FmocF-ADP hydrogel consisted of Fmoc-Phenylalanine and ADP

During trauma and surgery, bleeding is a major concern. One of the crucial strategies for hemostasis is the use of biological hemostatic material. Herein, we reported an amino acid-based hydrogel FmocF-ADP hydrogel, which consisted of N-[(9H-fluoren-9-ylmethoxy) carbonyl]-3-phenyl-L-alanine (FmocF) and adenosine diphosphate (ADP) sodium solution. The hydrogel was created by FmocF self-assembling to nanofiber in ADP sodium solution and then cross-linking to hydrogel. FmocF-ADP hydrogel showed good in vitro coagulation activity as measured by whole blood clotting assays, platelet clotting assays, platelet activation assays, and platelet adhesion assays. Further, it was noted to reveal an exceptional in vivo hemostatic effect in a mouse liver bleeding model. Together with the previous report of the good biocompatibility and antimicrobial activity of FmocF hydrogel, our study would extend the biomedical application of FmocF hydrogel. In conclusion, the present study would provide a constructive strategy for the development of new antimicrobial and hemostatic materials or develop a potential hemostatic material.

Modulating the Electromechanical Response of Bio-Inspired Amino Acid-Based Architectures through Supramolecular Co-Assembly

Supramolecular packing dictates the physical properties of bio-inspired molecular assemblies in the solid state. Yet, modulating the stacking modes of bio-inspired supramolecular assemblies remains a challenge and the structure-property relationship is still not fully understood, which hampers the rational design of molecular structures to fabricate materials with desired properties. Herein, we present a co-assembly strategy to modulate the supramolecular packing of N-terminally capped alanine-based assemblies (Ac-Ala) by changing the amino acid chirality and mixing with a nonchiral bipyridine derivative (BPA). The co-assembly induced distinct solid-state stacking modes determined by X-ray crystallography, resulting in significantly enhanced electromechanical properties of the assembly architectures. The highest rigidity was observed after the co-assembly of racemic Ac-Ala with a bipyridine coformer (BPA/Ac-DL-Ala), which exhibited a measured Young's modulus of 38.8 GPa. Notably, BPA crystallizes in a centrosymmetric space group, a condition that is broken when co-crystallized with Ac-L-Ala and Ac-D-Ala to induce a piezoelectric response. Enantiopure co-assemblies of BPA/Ac-D-Ala and BPA/Ac-L-Ala showed density functional theory-predicted piezoelectric responses that are remarkably higher than the other assemblies due to the increased polarization of their supramolecular packing. This is the first report of a centrosymmetric-crystallizing coformer which increases the single-crystal piezoelectric response of an electrically active bio-inspired molecular assembly. The design rules that emerge from this investigation of chemically complex co-assemblies can facilitate the molecular design of high-performance functional materials comprised of bio-inspired building blocks.

Basic-to-acidic reversible pH switching with a merocyanine photoacid

The application of merocyanine photoacids has previously been largely limited to neutral and acidic pH values. Here we introduce a new merocyanine photoacid with superior pH switching qualities. By increasing the pK_a in the dark (pKdarka) and the solubility we increased the reversible visible light induced pH jump to 3.5 units. Moreover, it is the first demonstration of a merocyanine photoacid able to generate a significant pH drop from a basic (pH 8.3) to an acidic (pH 5.2) environment.

Quantum confined peptide assemblies in a visual photoluminescent hydrogel platform and smartphone-assisted sample-to-answer analyzer for detecting trace pyrethroids

Quantum confinement (QC) effect-related materials have been extensively studied as photoluminescent probes for agricultural, food, and environmental analyses, with the advantage of simple-to-synthesize, reusable, nontoxic, and environmentally friendly. Herein, we propose a strategy to dimerize aromatic cyclo-dipeptides, namely cyclo-ditryptophan (cyclo-WW), cyclo-diphenylalanine (cyclo-FF), and cyclo-dihistidine (cyclo-HH), into quantum dots as basic building blocks for the self-assembly of QC supramolecular structures with excellent photoluminescent properties in aqueous solutions. In particular, through coordination with Zn(II), the bandgap can be tuned to change the photo-absorption and luminescence properties of the cyclo-dipeptide-based QC assemblies. The fluorescence quantum yield of cyclo-WW+Zn(II) was 16.9%. Such a good luminous effect makes it applicable to the detection of LC. A good linear relationship between fluorescence response of cyclo-WW+Zn(II) and LC concentration was observed in the range of 5-350 μg/L, with a low limit of detection of 2.9 μg/L and good spiked recovery of 90.72%-104.3%. A visual platform using the cyclo-WW+Zn(II)-based photoluminescent hydrogel and smartphone-assisted sample-to-answer analyzer were developed, which showed good responsiveness to LC. The developed fluorescence method, validated using traditional HPLC, is a biocompatible alternative for the rapid detection of trace pollutants with the advantages of portability and simple operation.

Reversible photo control of proton chemistry

Spatial, temporal, and remote control of proton chemistry can be achieved by using photoacids, which are molecules that transform from weak to strong acids under light. Most of proton chemistry is driven by a high concentration of protons ([H⁺]), which is difficult to obtain using excited-state photoacids. Metastable-stable state photoacids (mPAHs) can reversibly generate a high [H⁺] under visible light with a moderate intensity. It has been widely applied in different fields, e.g. fueling dissipative assemblies, driving molecular machines, controlling organic reactions, powering nanoreactors, curing diseases, manipulating DNA and proteins, developing smart materials, capturing carbon dioxide in air etc. This article compares mPAH with excited-state photoacid as well as common acids e.g. HCl to explain its advantages. Recent studies on the thermal dynamics, kinetics, and photoreaction of mPAHs are reported. The advantages and disadvantages of the three types of mPAHs, i.e. merocyanine, indazole, and TCF mPAHs, are compared with regard to photo-induced [H⁺], switching rate, and other properties. The mechanisms of controlling or driving functional systems, which involve acid-base reactions, acid catalyzed reactions, ionic bonding, coordination bonding, hydrogen bonding, ion exchange, cation-π interaction, solubility, swellability, permeability, and pH change in biosystems, are described. Applications of mPAHs in the chemical, material, energy, biotechnology and biomedical fields published in the past 5 years are reviewed. Prospects in the development and application of mPAHs are discussed.

Curcumin doped zeolitic imidazolate framework nanoplatform as a multifunctional nanocarrier for tumor chemo/immunotherapy

Curcumin as a hydrophobic polyphenol has great potential for tumor therapy, yet rapid degradation and hydrophobicity severely impair its therapeutic effect in the clinic. Herein, we report a novel strategy...

Large, Tunable, and Reversible pH Changes by Merocyanine Photoacids

Molecular photoswitches capable of generating precise pH changes will allow pH-dependent processes to be controlled remotely and noninvasively with light. We introduce a series of new merocyanine photoswitches, which deliver reversible bulk pH changes up to 3.2 pH units (pH 6.5 to pH 3.3) upon irradiation with 450 nm light, displaying tunable and predictable timescales for thermal recovery. We present models to show that the key parameters for optimizing the bulk pH changes are measurable: the solubility of the photoswitch, the acidity of the merocyanine form, the thermal equilibrium position between the spiropyran and the merocyanine isomers, and the increased acidity under visible light irradiation. Using ultrafast transient absorption spectroscopy, we determined the quantum yields for the ring-closing reaction and found that the lifetimes of the transient cis-merocyanine isomers ranged from 30 to 550 ns. Quantum yields did not appear to be a limitation for bulk pH switching. The models we present use experimentally determined parameters and are, in principle, able to predict the change in pH obtained for any related merocyanine photoacid.

Light-Switchable Buffers

A visible light-switchable buffer system based on a merocyanine photoacid is presented. Para-substitution of the indolium side with a methoxy group affords a compound suitable for making hydrolytically stable aqueous buffers whose pH can be tuned between 7 and 4 using 500 nm light.

Gelation of a Pentapeptide in Alcohols

Properties of solvents such as polarity and H-bond-forming ability are critical for the formation of an organogel and have a significant impact on the gel behavior, as solvents are the majority of organogel systems. However, so far, there is still a lack of systematic studies regarding the effects of molecular structures of solvents on the characteristics of organogels. Motivated by revealing such a relationship, in this paper, we studied the morphologies of assemblies, gelation behaviors, and secondary structures of a pentapeptide termed EAF-5 in a wide variety of alcohols. The side chains and lengths of carbon chains of the solvent molecules were found to play a critical role in the self-assembly and gelation of EAF-5. EAF-5 was capable of self-assembling into fibers and entangling into a network in alcohols including ethanol, propanol, butanol, n-pentanol, and n-hexanol, which further immobilized the corresponding alcohols to form gels. In these organogels, increasing β-sheet secondary structures of the peptides were formed by introducing side chains and extending the length of primary alcohol molecules. We hypothesized that alcohol molecules with extended lengths and side chains reduced the gelator-solvent interactions and promoted the gelator-gelator interactions, resulting in the self-assembly of EAF-5 into fibril structures and development of gels. These findings provide a new sight into the interactions between gelators and solvents and are helpful for designing peptide-based organogelators.

Supramolecular Chemistry: Host-Guest Molecular Complexes

In recent times, researchers have emphasized practical approaches for capturing coordinated and selective guest entrap. The physisorbed nanoporous supramolecular complexes have been widely used to restrain various guest species on compact supporting surfaces. The host-guest (HG) interactions in two-dimensional (2D) permeable porous linkages are growing expeditiously due to their future applications in biocatalysis, separation technology, or nanoscale patterning. The different crystal-like nanoporous network has been acquired to enclose and trap guest molecules of various dimensions and contours. The host centers have been lumped together via noncovalent interactions (such as hydrogen bonds, van der Waals (vdW) interactions, or coordinate bonds). In this review article, we enlighten and elucidate recent progress in HG chemistry, explored via scanning tunneling microscopy (STM). We summarize the synthesis, design, and characterization of typical HG structural design examined on various substrates, under ambient surroundings at the liquid-solid (LS) interface, or during ultrahigh vacuum (UHV). We emphasize isoreticular complexes, vibrant HG coordination, or hosts functional cavities responsive to the applied stimulus. Finally, we critically discuss the significant challenges in advancing this developing electrochemical field.

SERS Investigation on Oligopeptides Used as Biomimetic Coatings for Medical Devices

The surface-enhanced Raman scattering (SERS) spectra of three amphiphilic oligopeptides derived from EAK16 (AEAEAKAK)₂ were examined to study systematic amino acid substitution effects on the corresponding interaction with Ag colloidal nanoparticles. Such self-assembling molecular systems, known as “molecular Lego”, are of particular interest for their uses in tissue engineering and as biomimetic coatings for medical devices because they can form insoluble macroscopic membranes under physiological conditions. Spectra were collected for both native and gamma-irradiated samples. Quantum mechanical data on two of the examined oligopeptides were also obtained to clarify the assignment of the prominent significative bands observed in the spectra. In general, the peptide–nanoparticles interaction occurs through the COO⁻ groups, with the amide bond and the aliphatic chain close to the colloid surface. After gamma irradiation, mimicking a free oxidative radical attack, the SERS spectra of the biomaterials show that COO⁻ groups still provide the main peptide–nanoparticle interactions. However, the spatial arrangement of the peptides is different, exhibiting a systematic decrease in the distance between aliphatic chains and colloid nanoparticles.

Self-Assembled Peptide Nano-Superstructure towards Enzyme Mimicking Hydrolysis

The structural arrangement of amino acid residues in native enzymes underlies their remarkable catalytic properties, thus providing a notable point of reference for designing potent yet simple biomimetic catalysts. Herein, we describe a minimalistic approach to construct a dipeptide-based nano-superstructure with enzyme-like activity. The self-assembled biocatalyst comprises one peptide as a single building block, readily synthesized from histidine. Through coordination with zinc ion, the peptide self-assembly procedure allows the formation of supramolecular β-sheet ordered nanocrystals, which can be used as basic units to further construct higher-order superstructure. As a result, remarkable hydrolysis activity and enduring stability are demonstrated. Our work exemplifies the use of a bioinspired supramolecular assembly approach to develop next-generation biocatalysts for biotechnological applications.

Ultra-Low Molecular Weight Photoswitchable Hydrogelators

Two photoswitchable arylazopyrozoles form hydrogels at a concentration of 1.2 % (w/v). With a molecular weight of 258.28 g mol^-1 , these are the lowest known molecular weight hydrogelators that respond reversibly to light. Photoswitching of the E- to the Z-form by exposure to 365 nm light results in a macroscopic gel→sol transition; nearly an order of magnitude reduction in the measured elastic and loss moduli. In the case of the meta-arylazopyrozole, cryogenic transmission electron microscopy suggests that the 29±7 nm wide sheets in the E-gel state narrow to 13±2 nm upon photoswitching to the predominantly Z-solution state. Photoswitching for meta-arylazopyrozole is reversible through cycles of 365 nm and 520 nm excitation with little fatigue. The release of a rhodamine B dye encapsulated in gels formed by the arylazopyrozoles is accelerated more than 20-fold upon photoswitching with 365 nm light, demonstrating these materials are suitable for light-controlled cargo release.

Self-assembly of pentapeptides in ethanol to develop organogels

Organogels have a wide variety of applications in the fields of chemistry, electricity, biomedicine and environmental engineering, which call for robust strategies for designing and developing novel organogelators. Here, we reported a pentapeptide, ECAYF, which was capable of forming a self-healing ethanol gel exhibiting viscoelastic and solid-like properties. The ethanol gel of ECAYF was stable for at least several months, suggesting strong non-covalent interactions between ethanol and the peptide in the gel. In the ethanol gel, self-assembled peptide fibrils were found to immobilize the ethanol molecules for gelation. Results also suggested that the EAF-5 peptide adopted H-bonding β-sheet secondary structures, which further assembled into fibrils. Meanwhile, the self-assembly of the ECAYF peptide in mixtures of differently fractioned ethanol and H₂O was observed, which clearly indicated that ethanol promoted the assembly of ECAYF in the solutions. These findings are helpful in understanding the roles of organic solvents as well as the complicated interactions between the solvent and gelator molecules in gelation.

Nanostructured Gels for Energy and Environmental Applications

Nanostructured gels have emerged as an attractive functional material to innovate the field of energy, with applications ranging from extraction and purification to nanocatalysts with unprecedented performance. In this review we discuss the various classes of nanostructured gels and the most recent advancements in the field with a perspective on future directions of this challenging area.

Two-Dimensional Coordination Networks from Cyclic Dipeptides

Peptide-based biomimetic nanostructures and metal-organic coordination networks on surfaces are two promising classes of hybrid materials which have been explored recently. However, despite the great versatility and structural variability of natural and synthetic peptides, the two directions have so far not been merged in fabrication of metal-organic coordination networks using peptides as building blocks. Here we demonstrate that cyclic peptides can be used as ligands to form highly ordered, two-dimensional, peptide-based metal-organic coordination networks. The networks are formed on a Au(111) surface through coadsorption of cyclic dialanine with Cu-adatoms under Ultra-High Vacuum (UHV) conditions. Scanning Tunneling Microscopy (STM) in combination with X-ray Photoelectron spectroscopy (XPS) has been utilized to characterize the network structures at submolecular resolution and expound the chemical changes involved in network coordination. The networks involve a motif of three cyclic dialanine molecules coordinating to a central Cu-adatom. Interestingly the networks expose pores functionalized by the side chain of the cyclic peptide, suggesting a general method to form functionalized porous metal-organic networks on surfaces.

Photo-dissociation of self-assembled (anthracene-2-carbonyl)amino acid hydrogels

Amino acids modified with an N-terminal anthracene group self-assemble into supramolecular hydrogels upon the addition of a range of salts or cell culture medium. Gel-phase photo-dimerisation of gelators results in hydrogel disassembly and was used to recover cells from 3D culture.

A biocompatible PAA-Cu-MOP hydrogel for wound healing

Wounds infected by bacteria are dangerous for human beings. However, along with the emergence of new strains and strong bacterial resistance, traditional antibiotics are unable to meet the medical needs for treating bacterial infections. Thus, new antibacterial substances with superior antimicrobial properties are urgently needed. Herein, a hydrogel containing poly acrylic acid (PAA), glycerol and Cu-MOP (named PAA-Cu-MOP hydrogel) is obtained by a facile mixing and ultrasonic procedure for wound healing treatment. This PAA-Cu-MOP hydrogel with high biocompatibility exhibits excellent wound healing behavior and is even better than the one of recombinant human epidermal growth factor. Tissue experiment results reveal that the PAA-Cu-MOP hydrogel accelerates the wound healing process by promoting angiogenesis, stimulating cell proliferation, and up-regulating cell factors.

Thermodynamics and kinetics of protonated merocyanine photoacids in water

Metastable-state photoacids (mPAHs) are chemical species whose photo-activated state is long-lived enough to allow for proton diffusion. Liao's photoacid (1) represents the archetype of mPAHs, and is being widely used on account of its unique capability to change the acidity of aqueous solutions reversibly. The behavior of 1 in water, however, still remains poorly understood. Herein, we provide in-depth insights on the thermodynamics and kinetics of 1 in water through a series of comparative 1H NMR and UV-Vis studies and relative modelling. Under dark conditions, we quantified a three-component equilibrium system where the dissociation (K a) of the open protonated form (MCH) is followed by isomerization (K c) of the open deprotonated form (MC) to the closed spiropyran form (SP) - i.e., in the absence of light, the ground state acidity can be expressed as K GS a = K a(1 + K c). On the other hand, under powerful and continuous light irradiation we were able to assess, for the first time experimentally, the dissociation constant (K MS a) of the protonated metastable state (cis-MCH). In addition, we found that thermal ring-opening of SP is always rate-determining regardless of pH, whereas hydrolysis is reminiscent of what is found for Schiff bases. The proposed methodology is general, and it was applied to two other compounds bearing a shorter (ethyl, 2) and a longer (butyl, 3) alkyl-1-sulfonate bridge. We found that the pK a remains constant, whereas both pK c and pK MS a linearly increase with the length of the alkyl bridge. Importantly, all results are consistent with a four-component model cycle, which describes perfectly the full dynamics of proton release/uptake of 1-3 in water. The superior hydrolytic stability and water solubility of compound 3, together with its relatively high pK GS a (low K c), allowed us to achieve fully reversible jumps of 2.5 pH units over 18 consecutive cycles (6 hours).

Self-Assembled Dipeptide Aerogels with Tunable Wettability

Constructing supramolecular materials with tunable properties and functions is a great challenge due to the complex competition between multiple assembly pathways. Herein, we report that dipeptides can self-assemble into aerogels with entirely different surface wettability through precisely controlling the assembly pathways. Charged groups or aromatic residues are selectively exposed on the surface of their nanoscale building blocks which results either in a superhydrophilic or highly hydrophobic surface. With this special property, single component dipeptide aerogels can play diverse roles in medical care applications. This study suggests great promise in the synthesis of supramolecular materials with different targeted functions from the same molecular unit.

Lilypad aggregation: localised self-assembly and metal sequestration at a liquid-vapour interface

Spatially resolved soft materials, such as vesicles and microgels, have shown promise as selective adsorbents and microscale reaction vessels. However, spatiotemporal control of aggregation can be difficult to achieve. In this study, nickel(ii) chloride and a dipyridyl oligo(urea) ligand were combined in a vapour-diffusion setup to produce a localised spheroidal aggregate at the liquid-vapour interface. This aggregate forms via the self-assembly and fusion of monodisperse colloids and grows until its weight is no longer counterbalanced by surface tension. A simple physical model reveals that this process, termed lilypad aggregation, is possible only for surface energies that favour neither bulk aggregation nor the growth of an interfacial film. These surface energies dictate the final size and shape of the aggregate and may be estimated through visual monitoring of its changing morphology. Lilypad aggregates sequester metal from the surrounding sol and can be collected manually from the surface of the liquid.

Dipeptide Self-assembled Hydrogels with Shear-Thinning and Instantaneous Self-healing Properties Determined by Peptide Sequences

Dipeptide self-assembled hydrogels have potential biomedical applications because of their great biocompatibility, bioactivity, and tunable physicochemical properties, which can be modulated in the molecular level by design of amino acid sequences. Herein, a series of dipeptides (Fmoc-FL, -YL, -LL, and -YA) are designed to form shear-thinning hydrogels with self-healing and tunable mechanical properties by adjusting the synergetic effect of hydrophobic interactions (π-π stacking and hydrophobic effect) and hydrogen bonds of peptides through substitution of amino acid residues. The enhancement of hydrophobic interactions is a primary factor to promote mechanical rigidity of hydrogels, and strong hydrogen-bonding interactions between molecules contribute to the instantaneous self-healing property, which is supported by experimental studies (FTIR, CD, SEM, AFM, and rheology) and molecular dynamics simulations. The injectable dipeptide hydrogels were certified as an ideal endoscopic submucosal dissection filler to make operation convenient and secure in mice and living mini-pig's experiments with a longer duration time, higher stiffness, and lower inflammatory response than commercial clinical fillers.

Tunable Supramolecular Nanoarchitectures Constructed by the Complexation of Diphenanthro-24-Crown-8/Cesium(I) with Nickel(II) and Silver(I) Ions

Tunable supramolecular nanoarchitectures have received enormous attention because of their potential in materials fabrication. Herein, a variety of morphologically intriguing nanoarchitectures have been constructed from diphenanthro-24-crown-8 ether (DPC) and metal ions. SEM and TEM showed that the self-assembled nanofibers undergo a Cs^I -induced transformation into regular nanoribbons, and further into nanospheres and nanoparticles by the complexation of Ni^II and Ag^I ions because of the strong ion-dipole interaction. Moreover, the X-ray crystal structure determination and powder X-diffraction data further confirmed that these morphological transformations resulted from the different complexation between DPC and metal ions. This result provides a new strategy for the subtle manipulation of supramolecular assemblies.

Fabrication of a β-cyclodextrin-based self-assembly containing a redox-responsive ferrocene

The current research involves fabrication of a redox-responsive self-assembly system based on a ferrocene (Fc)-containing β-cyclodextrin (β-CD) derivative (βCD-EG-Fc). βCD-EG-Fc was synthesized, and its redox-sensitive self-assembly behavior was investigated using various techniques. On the basis of the intermolecular host-guest recognition between the β-CD group and the Fc moiety, βCD-EG-Fc primarily formed network-like structures and then vesicles following aging for a specified time. The formation of these structures was primarily driven by hydrogen bonding. Conversely, the oxidized molecules (βCD-EG-Fc⁺) self-assembled into cationic vesicles with the absence of host-guest complexation. Upon controlling the oxidation and reduction of Fc/Fc⁺, reversible aggregate transformation was achieved. The current study resulted in a deeper understanding of β-CD/Fc redox-responsive self-assemblies and contributed to the development of a single-component host-guest inclusion model.

Recent advances in light-regulated non-radical polymerisations

This review summarises recent advances in light-regulated non-radical polymerisations as well as the applications in materials science.

Cyclodextrin-Based Multistimuli-Responsive Supramolecular Assemblies and Their Biological Functions

Cyclodextrins (CDs), which are a class of cyclic oligosaccharides extracted from the enzymatic degradation of starch, are often utilized in molecular recognition and assembly constructs, primarily via host-guest interactions in water. In this review, recent progress in CD-based supramolecular nanoassemblies that are sensitive to chemical, biological, and physical stimuli is updated and reviewed, and intriguing examples of the biological functions of these nanoassemblies are presented, including pH- and redox-responsive drug and gene delivery, enzyme-activated specific cargo release, photoswitchable morphological interconversion, microtubular aggregation, and cell-cell communication, as well as a geomagnetism-controlled nanosystem for the suppression of tumor invasion and metastasis. Moreover, future perspectives and challenges in the fabrication of intelligent CD-based biofunctional materials are also discussed at the end of this review, which is expected to promote the translational development of these nanomaterials in the biomedical field.

Nucleation and Growth of Amino Acid and Peptide Supramolecular Polymers through Liquid-Liquid Phase Separation

The transition of peptides and proteins from the solution phase into fibrillar structures is a general phenomenon encountered in functional and aberrant biology and is increasingly exploited in soft materials science. However, the fundamental molecular events underpinning the early stages of their assembly and subsequent growth have remained challenging to elucidate. Here, we show that liquid-liquid phase separation into solute-rich and solute-poor phases is a fundamental step leading to the nucleation of supramolecular nanofibrils from molecular building blocks, including peptides and even amphiphilic amino acids. The solute-rich liquid droplets act as nucleation sites, allowing the formation of thermodynamically favorable nanofibrils following Ostwald's step rule. The transition from solution to liquid droplets is entropy driven while the transition from liquid droplets to nanofibrils is mediated by enthalpic interactions and characterized by structural reorganization. These findings shed light on how the nucleation barrier toward the formation of solid phases can be lowered through a kinetic mechanism which proceeds through a metastable liquid phase.

Photoactive properties of supramolecular assembled short peptides

Bioinspired nanostructures can be the ideal functional smart materials to bridge the fundamental biology, biomedicine and nanobiotechnology fields. Among them, short peptides are among the most preferred building blocks as they can self-assemble to form versatile supramolecular architectures displaying unique physical and chemical properties, including intriguing optical features. Herein, we discuss the progress made over the past few decades in the design and characterization of optical short peptide nanomaterials, focusing on their intrinsic photoluminescent and waveguiding performances, along with the diverse modulation strategies. We review the complicated optical properties and the advanced applications of photoactive short peptide self-assemblies, including photocatalysis, as well as photothermal and photodynamic therapy. The diverse advantages of photoactive short peptide self-assemblies, such as eco-friendliness, morphological and functional flexibility, and ease of preparation and modification, endow them with the capability to potentially serve as next-generation, bio-organic optical materials, allowing the bridging of the optics world and the nanobiotechnology field.

Design of l-Lysine-Based Organogelators and Their Applications in Drug Release Processes

This work reports on the synthesis of three new l-lysine-based organogelators bis(N²-alkanoyl-N⁶-l-lysyl ethylester)oxalylamides, where alkanoyls are lauroyl, myristoyl, and palmitoyl. The gels of these gelators were prepared with high yields in eco-friendly solvents commonly used in cosmetics such as ethyl and isopropyl esters of lauric and myristic acids, liquid paraffin, 1-decanol, and 1,2-propanediol. Fourier transform infrared measurements revealed the involvement of intermolecular hydrogen bonds in the gelation. Scanning electron microscopy images of xerogels indicated different morphologic patterns with regard to the alkanoyl chain length and the solvent employed in their preparation. The gel formation was supported by rheological measurements. Three gels prepared in liquid paraffin were loaded with naproxen (Npx) with a quite high loading capacity (up to 166.6% as percentage of gelator) without gel disruption. The release of Npx from the gel matrix into the buffered solution at physiologic pH was evaluated using UV-vis spectroscopy. The results revealed that the release rate of Npx from the organogels significantly retarded with increasing organogelator concentration, whereas it enhanced with increasing Npx concentration. The rate was also found to be pH-dependent; the lower the pH, the lower the rate. Furthermore, molecular dynamic calculations performed on the octamer of myristoyl-bearing gelator (N ² M/N ⁶ Lys) in 1,2-propanediol provided useful information regarding the structural properties of the gels, which may be of interest to interpret the structure of the gel matrix. Altogether, this work provided valuable outcomes, which may be relevant to the pharmaceutical industry. It may be suggested that l-lysine-based gels have potentials in the delivery of nonsteroidal anti-inflammatory drug molecules. Besides, the release of the drug can be fine-tuned by the correct choice of gelator-solvent combination.