Stable Blue Luminescent CsPbBr3 Perovskite Nanocrystals Confined in Mesoporous Thin Films

Harnessing Pb-S Interactions for Long-Term Water Stability in Cesium Lead Halide Perovskite Nanocrystals

Lead halide perovskite nanocrystals (LHP NCs) have garnered attention as promising light-harvesting materials for optoelectronics and photovoltaic devices, attributed to their impressive optoelectronic properties. However, their susceptibility to moisture-induced degradation has hindered their practical applications. Despite various encapsulation strategies, challenges persist in maintaining their stability and optoelectronic performance simultaneously. Here, a ligand exchange approach is proposed using (11-mercaptoundecyl)-N,N,N-trimethylammonium bromide (MUTAB) to enhance the stability and dispersibility of CsPbBr3 (CPB) NCs in aqueous environments. MUTAB enables effective surface passivation of the CPB NCs via robust Pb-S interactions at the S-terminal while concurrently directing water molecules through the unbound cationic N-terminal or vice versa, ensuring water dispersibility and stability. Spectroscopic analysis confirms retained structural and optical integrity post-ligand exchange. Crucially, MUTAB-bound CPB NCs exhibit sustained charge transfer properties, demonstrated by aqueous colloidal oxidation reactions. This ligand exchange strategy offers a promising pathway for advancing LHP NCs toward practical optoelectronic and photocatalytic applications.

Metal Halide Nanocrystals@Silica Aerogel Composite with Enhanced Dispersion Stability and Light Output for Efficient X-Ray Imaging in Harsh Environment

Metal halide nanocrystals (MHNCs) embedded in a polymer matrix as flexible X-ray detector screens is an effective strategy with the advantages of low cost, facile preparation, and large area flexibility. However, MHNCs easily aggregate during preparation, recombination, under mechanical force, storage, or high operating temperature. Meanwhile, it shows an unmatched refractive index with polymer, resulting in low light yield. The related stability and properties of the device remain a huge unrevealed challenge. Herein, a composite screen (CZBM@AG-PS) by integrating MHNCs (Cs2ZnBr4: Mn2+ as an example) into silica aerogel (AG) and embedded in polystyrene (PS) is successfully developed. Further characterization points to the high porosity AG template that can effectively improve the dispersion of MHNCs in polymer detector screens, essentially decreasing nonradiative transition, Rayleigh scattering, and performance aging induced by aggregation in harsh environments. Furthermore, the higher light output and lower optical crosstalk are also achieved by a novel light propagation path based on the MHNCs/AG and AG/PS interfaces. Finally, the optimized CZBM@AG-PS screen shows much enhanced light yield, spatial resolution, and temperature stability. Significantly, the strategy is proven universal by the performance tests of other MHNCs embedded composite films for ultra-stable and efficient X-ray imaging.

Alkali-Metal-Assisted Green-Solvent Synthesis for In Situ Growth of Perovskite Nanocrystals in Porous Materials

Inorganic metal halide perovskite CsPbX3 (X = I, Br, and Cl) nanocrystals (NCs) are rapidly developed due to their excellent photophysical properties and potential applications in lighting, lasers, and scintillators. However, the materials for growing perovskite NCs are insoluble or hydrolyzed in most green solvents, limiting their further development. Based on rational chemical analysis, an alkali-metal-assisted green-solvent synthesis method for in situ growth of CsPbBr3 NCs within SAPO-34 zeolite with bright luminescence is developed. Water is the only solvent used in the whole process. Surprisingly, by the synergistic effect of the channel structure of SAPO-34 and alkali-metal ions crystallization regulation, the CsPbBr3 NCs embedded in SAPO-34 assisted by Na+ emit bright blue light under ultraviolet illumination, with a 30 nm blue shift comparing to the CsPbBr3 NCs assisted by K+. Moreover, CsPbBr3 NCs can also be grown in mesoporous SiO2 SBA-15 and zeolites including ZSM-5, AlPO-5, and SOD, indicating that the method is universal for in situ growth of luminescent perovskite NCs in porous materials. This alkali-metal-assisted green-solvent synthesis provides a new strategy for developing high-quantum-yield, tunable-emission, and stable perovskite luminescent materials.

Effect of Connectivity on the Carrier Transport and Recombination Dynamics of Perovskite Quantum-Dot Networks

Quantum-dot (QD) solids are being widely exploited as a solution-processable technology to develop photovoltaic, light-emission, and photodetection devices. Charge transport in these materials is the result of a compromise between confinement at the individual QD level and electronic coupling among the different nanocrystals in the ensemble. While this is commonly achieved by ligand engineering in colloidal-based systems, ligand-free QD assemblies have recently emerged as an exciting alternative where nanostructures can be directly grown into porous matrices with optical quality as well as control over their connectivity and, hence, charge transport properties. In this context, we present a complete photophysical study comprising fluence- and temperature-dependent time-resolved spectroscopy to study carrier dynamics in ligand-free QD networks with gradually varying degrees of interconnectivity, which we achieve by changing the average distance between the QDs. Analysis of the photoluminescence and absorption properties of the QD assemblies, involving both static and time-resolved measurements, allows us to identify the weight of the different recombination mechanisms, both radiative and nonradiative, as a function of QD connectivity. We propose a picture where carrier diffusion, which is needed for any optoelectronic application and implies interparticle transport, gives rise to the exposure of carriers to a larger defect landscape than in the case of isolated QDs. The use of a broad range of fluences permits extracting valuable information for applications demanding either low- or high-carrier-injection levels and highlighting the relevance of a judicious design to balance recombination and diffusion.

Improving the stability of perovskite nanocrystals via SiO2 coating and their applications

Lead halide perovskite nanocrystals (LHP NCs) with outstanding optical properties have been regarded as promising alternatives to traditional phosphors for lighting and next-generation display technology. However, the practical applications of LHP NCs are seriously hindered by their poor stability upon exposure to moisture, oxygen, light, and heat. Hence, various strategies have been proposed to solve this issue. In this review, we have focused our attention on improving the stability of LHP NCs via SiO2 coating because it has the advantages of simple operation, less toxicity, and easy repetition. SiO2 coating is classified into four types: (a) in situ hydrolytic coating, (b) mesoporous silica loading, (c) mediated anchoring, and (d) double coating. The potential applications of SiO2-coated LHP NCs in the field of optoelectronics, biology, and catalysis are presented to elucidate the reliability and availability of SiO2 coating. Finally, the future development and challenges in the preparation of SiO2-coated LHP NCs are analyzed in order to promote the commercialization process of LHP NC-related commodities.

Ultrasmall water-stable CsPbBr3 quantum dots with high intensity blue emission enabled by zeolite confinement engineering

Ultrasmall CsPbBr3 perovskite quantum dots (PQDs) as promising blue-emitting materials are highly desired for full-color display and lighting applications, but their inferior efficiency and poor ambient stability hinder extensive applications. Herein, a "break-and-repair" strategy has been developed to tightly confine monodispersed ultrasmall CsPbBr3 PQDs in a zeolite. In this strategy, the CsPbBr3 PQDs are introduced into the zeolite via a high temperature evaporation method, wherein the perovskite precursors break the zeolite framework, and amino acids and silane are then used to fix the damaged framework and lock the perovskite QDs within the matrix. By modulating the synthetic conditions to control the growth of CsPbBr3, PQDs with ultrasmall size of 2 nm have been obtained in the zeolite, giving emission centered at 460 nm with a high quantum yield of 76.93%. Strikingly, the PQDs@zeolite composite exhibits water-induced reversible photoluminescence promoted by the coordination between the amino acids and PQDs in a dynamic manner, achieving enhanced water stability (14 days in aqueous solution). This work provides a new perspective for the synthesis of water-stable blue-emitting perovskite composites for potential applications in lighting fields.

Strategies to Extend the Lifetime of Perovskite Downconversion Films for Display Applications

Metal halide perovskite nanocrystals (PeNCs) have outstanding luminescent properties that are suitable for displays that have high color purity and high absorption coefficient; so they are evaluated for application as light emitters for organic light-emitting diodes, light-converters for downconversion displays, and future near-eye augmented reality/virtual reality displays. However, PeNCs are chemically vulnerable to heat, light, and moisture, and these weaknesses must be overcome before devices that use PeNCs can be commercialized. This review examines strategies to overcome the low stability of PeNCs and thereby permit the fabrication of stable downconversion films, and summarizes downconversion-type display applications and future prospects. First, methods to increase the chemical stability of PeNCs are examined. Second, methods to encapsulate PeNC downconversion films to increase their lifetime are reviewed. Third, methods to increase the long-term compatibility of resin with PeNCs, and finally, how to secure stability using fillers added to the resin are summarized. Fourth, the method to manufacture downconversion films and the procedure to evaluate their reliability for commercialization is then described. Finally, the prospects of a downconversion system that exploits the properties of PeNCs and can be employed to fabricate fine pixels for high-resolution displays and for near-eye augmented reality/virtual reality devices are explored.

Ultrapure Green High Photoluminescence Quantum Yield from FAPbBr3 Nanocrystals Embedded in Transparent Porous Films

Achieving highly transparent and emissive films based on perovskite quantum dots (PQDs) is a challenging task since their photoluminescence quantum yield (PLQY) typically drops abruptly when they are used as building blocks to make a solid. In this work, we obtain highly transparent films containing FAPbBr₃ quantum dots that display a narrow green emission (λ = 530 nm, full width at half-maximum (FWHM) = 23 nm) with a PLQY as high as 86%. The method employed makes use of porous matrices that act as arrays of nanoreactors to synthesize the targeted quantum dots within their void space, providing both a means to keep them dispersed and a protective environment. Further infiltration with poly(methyl methacrylate) (PMMA) increases the mechanical and chemical stability of the ensemble and serves to passivate surface defects, boosting the emission of the embedded PQD and significantly reducing the width of the emission peak, which fulfills the requirements established by the Commission Internationale de l'Éclairage (CIE) to be considered an ultrapure green emitter. The versatility of this approach is demonstrated by fabricating a color-converting layer that can be easily transferred onto a light-emitting device surface to modify the spectral properties of the outgoing radiation.

Advances in All-Inorganic Perovskite Nanocrystal-Based White Light Emitting Devices

Metal halide perovskites (MHPs) are exceptional semiconductors best known for their intriguing properties, such as high absorption coefficients, tunable bandgaps, excellent charge transport, and high luminescence yields. Among various MHPs, all-inorganic perovskites exhibit benefits over hybrid compositions. Notably, critical properties, including chemical and structural stability, could be improved by employing organic-cation-free MHPs in optoelectronic devices such as solar cells and light-emitting devices (LEDs). Due to their enticing features, including spectral tunability over the entire visible spectrum with high color purity, all-inorganic perovskites have become a focus of intense research for LEDs. This Review explores and discusses the application of all-inorganic CsPbX₃ nanocrystals (NCs) in developing blue and white LEDs. We discuss the challenges perovskite-based LEDs (PLEDs) face and the potential strategies adopted to establish state-of-the-art synthetic routes to obtain rational control over dimensions and shape symmetry without compromising the optoelectronic properties. Finally, we emphasize the significance of matching the driving currents of different LED chips and balancing the aging and temperature of individual chips to realize efficient, uniform, and stable white electroluminescence.

Ligand-free template-assisted synthesis of stable perovskite nanocrystals with near-unity photoluminescence quantum yield within the pores of vaterite spheres

Ligand-free methods for the synthesis of halide perovskite nanocrystals are of great interest because of their excellent performance in optoelectronics and photonics. In addition, template-assisted synthesis methods have become a powerful tool for the fabrication of environmentally stable and bright nanocrystals. Here we develop a novel approach for the facile ligand-free template-assisted fabrication of perovskite nanocrystals with a near-unity absolute quantum yield, which involves CaCO₃ vaterite micro- and submicrospheres as templates. We show that the optical properties of the obtained nanocrystals are affected not mainly by the template morphology, but strongly depend on the concentration of precursor solutions, anion and cation ratio, as well as on adding defect-passivating rare-earth dopants. The optimized samples are further tested as infrared radiation visualizers exhibiting promising characteristics comparable to those that are commercially available.

Responsive Optical Materials Based on Ligand-Free Perovskite Quantum Dots Embedded in Mesoporous Scaffolds

Herein we show that dispersing inorganic cesium lead bromide (CsPbBr₃) perovskite quantum dots (QDs) in optical quality films, possessing an accessible and controlled pore size distribution, gives rise to fluorescent materials with a controlled and highly sensitive response to ambient changes. A scaffold-based synthesis approach is employed to obtain ligand-free QDs, whose pristine surface endows them with high sensitivity to the presence of different vapors in their vicinity. At the same time, the void network of the host offers a means to gradually expose the embedded QDs to such vapors. Under these conditions, the luminescent response of the QDs is mediated by the mesostructure of the matrix, which determines the rate at which vapor molecules will adsorb onto the pore walls and, eventually, condensate, filling the void space. With luminescence quantum yields as high as 60%, scaffold-supported ligand-free perovskite nanocrystals display intense photoemission signals over the whole process, as well as high photo- and chemical stability, which allows illuminating them for long periods of time and recovering the original response upon desorption of the condensed phase. The results herein presented open a new route to explore the application of perovskite QD-based materials in sensing.

High Electrochemiluminescence from Ru(bpy)3 2+ Embedded Metal-Organic Frameworks to Visualize Single Molecule Movement at the Cellular Membrane

Direct imaging of single-molecule and its movement is of fundamental importance in biology, but challenging. Herein, aided by the nanoconfinement effect and resultant high reaction activity within metal-organic frameworks (MOFs), the designed Ru(bpy)₃ ²⁺ embedded MOF complex (RuMOFs) exhibits bright electrochemiluminescence (ECL) emission permitting high-quality imaging of ECL events at single molecule level. By labeling individual proteins of living cells with single RuMOFs, the distribution of membrane tyrosine-protein-kinase-like7 (PTK7) proteins at low-expressing cells is imaged via ECL. More importantly, the efficient capture of ECL photons generated inside the MOFs results in a stable ECL emission up to 1 h, allowing the in operando visualization of protein movements at the cellular membrane. As compared with the fluorescence observation, near-zero ECL background surrounding the target protein with the ECL emitter gives a better contrast for the dynamic imaging of discrete protein movement. This achievement of single molecule ECL dynamic imaging using RuMOFs will provide a more effective nanoemitter to observe the distribution and motion of individual proteins at living cells.

Folding of two-dimensional nanoparticle superlattices enabled by emulsion-confined supramolecular co-assembly

Folding of two-dimensional nanoparticle superlattices is achieved through templated assembly on as-formed supramolecular nanosheets, which undergo a folding process within the emulsion droplets during the evaporation of the inner phase liquid. Building the folded nanoparticle superlattices opens a new gateway to reshape the properties of inorganic solids.

Tough, stable and self-healing luminescent perovskite-polymer matrix applicable to all harsh aquatic environments

Gelatinous underwater invertebrates such as jellyfish have organs that are transparent, luminescent and self-healing, which allow the creatures to navigate, camouflage themselves and, indeed, survive in aquatic environments. Artificial luminescent materials that can mimic such functionality can be used to develop aquatic wearable/stretchable displays and water-resistant devices. Here, a luminescent composite that is simultaneously transparent, tough and can autonomously self-heal in both dry and wet conditions is reported. A tough, self-healable fluorine elastomer with dipole–dipole interactions is synthesized as the polymer matrix. It exhibits excellent compatibility with metal halide perovskite quantum dots. The composite possesses a toughness of 19 MJ m−3, maximum strain of 1300% and capability to autonomously self-heal underwater. Notably, the material can withstand extremely harsh aqueous conditions, such as highly salty, acidic (pH = 1) and basic (pH = 13) environment for more than several months with almost no decay in mechanical performance or optical properties.

Tunable deep-blue luminescence from ball-milled chlorine-rich Csx(NH4)1-xPbCl2Br nanocrystals by ammonium modulation

For the first time, a novel class of deep-blue (DB)-emitting Cs_x(NH₄)_1-xPbCl₂Br (0.3 ≤ x ≤ 1) perovskite nanocrystals (PNCs) were prepared by a facile ligand-assisted one-step ball milling method. The resulted PNCs are characterized by high chlorine content (66.7%) and excellent color purity. Their photoluminescence position can be finely modulated from 434 nm to 447 nm, which extends notably beyond the current Rec. 2020 color standard, by the NH₄⁺ content. Among them, Cs_0.3(NH₄)_0.7PbCl₂Br shows the highest quantum yield close to 40%. The PNCs exhibit high phase and optical stability under ambient conditions and UV light according to the NH₄⁺ content. This work offers a new avenue to produce DB perovskites for future full-color displays and optoelectronics.

A General Polymer-Oriented Acid-Mediated Self-Assembly Approach toward Crystalline Mesoporous Metal Sulfides

Mesoporous metal sulfides (MMSs) with high surface areas and large pore volumes show great potential in many applications such as gas sensing, photodetection, and catalysis. However, the synthesis of MMSs is still challenging due to the uncontrollable fast precipitation between metal ions and S^2- ions and the large volume contraction during the conversion of metal precursors to sulfides. Here, a general polymer-oriented acid-mediated self-assembly method to synthesize highly crystalline MMSs (e.g., ZnS, CdS, Ni₃ S₄ , CuS, and Zn_x Cd_{1- x} S) by using polyethylenimine (PEI) as pore-forming agent is reported. In this method, acetic acid is designed as pH regulator and coordination agent to control the interactions between inorganic precursors and PEI, and adjust the reaction kinetics of metal ions and thioacetamide. This method endows a high degree of control over crystal structure and porous structure of MMSs. The surface areas and pore volumes of obtained MMSs are as high as 157 m² g^-1 and 1.149 cm³ g^-1 , respectively. Benefiting from the abundant mesopores and homojunctions, mesoporous Zn_0.56 Cd_0.44 S shows a superior photocatalytic H₂ generation rate of 14.3 mmol h^-1 g^-1 .

Synthesis of High Specific Surface Area Macroporous Pectin Particles by Template-Assisted Spray Drying

Many types of porous particles containing inorganic and organic substances, such as carbon, metals, metal oxides, inorganic-organic hybrids, and polymers, have been developed. However, natural polymer-derived particles are relatively rare. To our knowledge, this report describes the first synthetic method for obtaining meso-/macroporous particles made from pectin, which is a natural polymer with a wide range of biological activities suitable for active substance support applications. These porous particles were prepared using a template-assisted spray-drying method, followed by a chemical etching process. An organic template [i.e., poly(methyl methacrylate) (PMMA)] or an inorganic template [i.e., calcium carbonate (CaCO₃)] was used to evaluate the resulting formation of macroporous structures in the pectin particles. Furthermore, the concentration of the templates in the precursor solution was varied to better understand the mechanism of porous pectin particle formation. The results showed that the final porous particles maintained the characteristic properties of pectin. The differences between the two templates resulted in two distinct types of porous particles that differed in their particle morphologies (i.e., spherical or wrinkled), particle sizes (ranging from 3 to 8 μm), pore sizes (ranging from 80 to 350 nm), and pore volume (ranging from 0.024 to 1.40 cm³ g^-1). Especially, the porous pectin particles using the CaCO₃ template have a significantly high specific surface area of 171.2 m² g^-1, which is 114 times higher than that of nonporous pectin particles. These data demonstrated the potential for using PMMA and CaCO₃ templates to control and design desired porous materials.

A polymer-coated template-confinement CsPbBr3 perovskite quantum dot composite

Metal halide perovskites show abundant photophysical properties and great potential in photovoltaic and electroluminescence devices, but their poor stability is an obvious shortcoming. Here, we successfully synthesized polymer-coated CsPbBr₃ quantum dots (QDs) grown in situ on a template. Conjugated linoleic acid (CLA) is used as a ligand to passivate the surface defects of QDs. QDs can be used as photoinitiators in polymerization to initiate CLA crosslinking under illumination, thereby forming polymer coatings to improve the stability of QDs. The mesoporous silica microspheres are used as templates to make CsPbBr₃ QDs grow in situ in the pores and avoid the size growth and agglomeration of QDs. The obtained composite material has a narrow full width at half maximum and an absolute photoluminescence quantum yield of 79.16%. Due to the protection of the hydrophobic polymer layer, it can still maintain 77% of the photoluminescence intensity after soaking in water for a week.

Dual-Protected Metal Halide Perovskite Nanosheets with an Enhanced Set of Stabilities

Approaches to achieve stable perovskite nanocrystals (PNCs) of interest, in particular those with large structural anisotropy, through protective coating of the inorganic shell at a single-nanocrystal (NC) level are comparatively few and limited in scope. Reported here is a robust amphiphilic-diblock-copolymer-enabled strategy for crafting highly-stable anisotropic CsPbBr₃ nanosheets (NSs) by in situ formation of a uniform inorganic shell (1st shielding) that is intimately ligated with hydrophobic polymers (2nd shielding). The dual-protected NSs display an array of remarkable stabilities (i.e., thermal, photostability, moisture, polar solvent, aliphatic amine, etc.) and find application in white-light-emitting diodes. In principle, by anchoring other multidentate amphiphilic polymer ligands on the surface of PNCs, followed by templated-growth of shell materials of interest, a rich variety of dual-shelled, multifunctional PNCs with markedly improved stabilities can be created for use in optics, optoelectronics, and sensory devices.

In Vitro Bioactivity and Antibacterial Activity of Strontium-, Magnesium-, and Zinc-Multidoped Hydroxyapatite Porous Coatings Applied via Atmospheric Plasma Spraying

The beneficial effects of Sr- and Mg-doped hydroxyapatite (HAp) on osteoblast proliferation and bone regeneration have been investigated in the past, and the antibacterial ability of Zn ions is well known. However, HAp coatings doped with these three elements via thermal spraying have not yet been investigated. In this study, HAp powder was synthesized at different pH values (4, 6, 8, and 10) and calcined at different temperatures (200, 400, 600, 800, and 1000 °C) to obtain HAp with the highest purity. Subsequently, strontium-, magnesium-, and zinc-doped HAp powders were synthesized at the optimal pH value and calcination temperature. The HAp powder was then coated onto Ti disks using atmospheric plasma spraying (APS) or vapor-induced pore-forming atmospheric plasma spraying (VIPF-APS) techniques at different working currents (350, 400, and 450 A) and spraying distances (10 and 15 cm). X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy equipped with energy-dispersive spectroscopy were used for material characterization to determine the optimal parameters. With these optimal coating parameters, HAp, Zn-HAp, SrMg-HAp, and ZnSrMg-HAp powders were deposited onto the Ti disks using VIPF-APS and named HAp-Ti, Zn-HAp-Ti, SrMg-HAp-Ti, and ZnSrMg-HAp-Ti, respectively. The in vitro bioactivity of these four groups was evaluated using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and alkaline phosphatase (ALPase) activity assay. Besides, the antibacterial activities against Prevotella nigrescens, Porphyromonas gingivalis, and Fusobacterium nucleatum were assessed. The results showed that the purity of HAp synthesized at pH 10 and 800 °C was 98.40%. A porous coating without cracks was obtained at a 10 cm spraying distance and 400 A working current using VIPF-APS. SrMg-HAp-Ti and ZnSrMg-HAp-Ti resulted in higher osteoblast proliferation and ALPase activity than the control. Moreover, both Zn-HAp-Ti and ZnSrMg-HAp-Ti exhibited antibacterial activity against the three bacteria. Therefore, ZnSrMg-HAp has potential as a coating for biomedical materials due to its ability to reduce bacterial infection and enhance osseointegration.

Low-Temperature Molten Salts Synthesis: CsPbBr3 Nanocrystals with High Photoluminescence Emission Buried in Mesoporous SiO2

Using mesoporous SiO₂ to encapsulate CsPbBr₃ nanocrystals is one of the best strategies to exploit such materials in devices. However, the CsPbBr₃/SiO₂ composites produced so far do not exhibit strong photoluminescence emission and, simultaneously, high stability against heat and water. We demonstrate a molten-salts-based approach delivering CsPbBr₃/mesoporous-SiO₂ composites with high PLQY (89 ± 10%) and high stability against heat, water, and aqua regia. The molten salts enable the formation of perovskite nanocrystals and other inorganic salts (KNO₃-NaNO₃-KBr) inside silica and the sealing of SiO₂ pores at temperatures as low as 350 °C, representing an important technological advancement (analogous sealing was observed only above 700 °C in previous reports). Our CsPbBr₃/mesoporous-SiO₂ composites are attractive for different applications: as a proof-of-concept, we prepared a white-light emitting diode exhibiting a correlated color temperature of 7692K. Our composites are also stable after immersion in saline water at high temperatures (a typical underground environment of oil wells), therefore holding promise as oil tracers.

Organic-Inorganic Hybrid Nanocrystal-based Cryogels with Size-Controlled Mesopores and Macropores

Nanocrystal-based processing has attracted significant interest for the fabrication of highly functional materials with controlled crystallinity and fine porous structures. In this study, we focused on the template-free synthesis of nanocrystal-based materials with size-tailored pores using layered nickel hydroxide intercalated with acrylate anions. Polymerization of the acrylates encouraged interconnection of the nanocrystals and the formation of homogeneous gel networks. Cryogels after freeze-drying had pores with an average diameter from 4.8 nm (mesoscale) to 68.9 nm (macroscale). It was found that the surface characteristics of starting nanocrystals determined the phase separation tendency of interconnected species from the reaction media and resultant porous structures. We believe that the present study can enable the design of template-free nanocrystal-based porous materials.

Interfacial Super-Assembly of Ordered Mesoporous Silica-Alumina Heterostructure Membranes with pH-Sensitive Properties for Osmotic Energy Harvesting

Osmotic energy existing between seawater and freshwater is a potential blue energy source that can mitigate the energy crisis and environmental pollution problems. Nanofluidic devices are widely utilized to capture this blue energy owing to their unique ionic transport properties in the nanometer scale. However, with respect to nanofluidic membrane devices, high membrane inner resistance and a low power density induced by disordered pores and thick coating as well as difficulty in manufacturing still impede their real-world applications. Here, we demonstrate an interfacial super-assembly strategy that is capable of fabricating ordered mesoporous silica/macroporous alumina (MS/AAO) framework-based nanofluidic heterostructure membranes with a thin and ordered mesoporous silica layer. The presence of a mesoporous silica layer with abundant silanol and a high specific surface area endows the heterostructure membrane with a low membrane inner resistance of about 7 KΩ, excellent ion selectivity, and osmotic energy conversion ability. The power density can reach up to 4.50 W/m² by mixing artificial seawater and river water through the membrane, which is 20 times higher than that of the conventional 2D nanofluidic membrane, and outperforms about 30% compared to other 3D porous membranes. More intriguingly, the interesting pH-sensitive osmotic energy conversion property of the MS/AAO membrane is subsequently recognized, which can realize a higher power density even in acidic or alkaline wastewater, expanding the application range, especially in practical applications. This work presents a valuable paradigm for the use of mesoporous materials in nanofluidic devices and provides a way for large-scale production of nanofluidic devices.

Insights into the behavior of ethylene oxide-1,2-epoxybutane diblock copolymers in water as a function of temperature and the presence of colloidal silica

HYPOTHESIS

Nonionic surfactants have been widely used for many consumer products and industrial processes, and their applications often involve temperature-cycling across cloud point temperature (T_cloud). To explore the behavior of nonionic surfactants across T_cloud and when mixed with colloidal silica at a very dilute concentration around 0.1 wt%, a series of 1,2-epoxybutane-capped alcohol ethoxylates (BAEs) with various cloud points is used as a model system.

EXPERIMENTS

BAEs with cloud points from 15 to 64 °C were successfully prepared by varying the lengths of 1,2-epoxybutane (BO) and ethylene oxide (EO) blocks and their phase behavior across T_cloud was studied using nuclear magnetic resonance spectroscopy (NMR), dynamic light scattering (DLS) and differential scanning calorimetry (DSC).

FINDINGS

In the absence of silica, the NMR signals are not greatly affected by the cloud point transition, but both the water and surfactant exhibit a decrease in spin-spin relaxation time once the temperature reaches the T_cloud. In the presence of silica, the NMR spectra indicate significantly reduced mobility of the EO portion relative to the alkyl and BO segments. Furthermore, our results suggest that the BAE surfactants are not fractionally clouding out or precipitating with a portion of the compositional distribution during the cloud point transition.

Mechanochemically synthesized mesoporous alumina: a smart new-generation sorbent for preparation of chromatographic 188W/188Re generator

Abstract

In an effort towards affordable availability of chromatographic 188W/188Re generators for widespread clinical use, we report the mechanochemical synthesis of mesoporous alumina as an advanced sorbent material for preparation of the generator. The synthesized material exhibits remarkably high sorption capacity (550 ± 12 mg W/g), which is adequate for preparation of clinical-scale generators using low specific activity (LSA) 188W produced in medium flux research reactors. Sorption of 188W in mesoporous alumina follows Freundlich adsorption isotherm and pseudo second order kinetics, indicating that the process is chemisorption. A clinical-scale (~ 14.0 GBq) 188W/188Re generator was developed and its performance was evaluated over a period of 6 months. Rhenium-188 could be consistently obtained from the generator with high yield (> 80%) and it met all the requirements for clinical use. The present strategy is expected to increase the scope of separation chemistry for availing clinical-grade 188Re for the benefit of millions of cancer patients world over.

Graphic abstract

Template-mediated self-assembly of magnetite-gold nanoparticle superstructures at the water-oil interface of AOT reverse microemulsions

HYPOTHESIS

Bimetallic magnetite-gold nanostructures are interesting candidates to combine and enhance individual properties of each metal element in catalytic and analytical applications. Microemulsions have been employed in templated synthesis of nanoparticles, and their combination with different types of nanoparticles can further mediate interactions at the water-oil interface, providing new forms of hybrid nanostructures.

EXPERIMENTS

Reverse water-in-oil microemulsions of droplet sizes below 50 nm were prepared from ternary mixtures of Aerosol-OT (AOT) as surfactant, incorporating 4 nm sized superparamagnetic nanoparticles (MNPs) to the hexane-pentanol oil phase and 5 nm sized polyethyleneimine-stabilized gold nanoparticles (Au(PEI)-NPs) to the water phase. The resulting isotropic L₂ phase, Winsor phases and organized nanostructures were investigated using conductometry, calorimetry, UV-Vis spectroscopy, cryo-SEM and HRTEM.

FINDINGS

Droplet-droplet interactions, morphology and surfactant film properties of AOT microemulsions could be modulated in different ways by the presence of the different nanoparticles from each liquid phase. Additionally, phase separation into Winsor phases allows the formation upon solvent evaporation of films with bimetallic heterostructures on the micrometer scale. This demonstrates a new way of nanoparticle templated assembly at liquid interfaces by assisted interactions between microemulsions and nanoparticles, as a promising strategy to obtain thin films of small, isotropic nanoparticles with hierarchical ordering.

Bis(terpyridine) Iron(II) Functionalized Vertically-Oriented Nanostructured Silica Films: Toward Electrochromic Materials

Recent and potential applications of electrochromic materials include smart windows, optoelectronic devices, and energy conversion. In this study, we have incorporated bis(terpyridine) iron (II) complexes into vertically-oriented silica thin films deposited on indium-tin oxide (ITO) and their electrochromic behavior has been investigated. If 2,2′:6′,2″-terpyridine is commonly used as a ligand for forming metallo-supramolecular assemblies, with the objective to get metal-terpyridine complexes with multiple stable redox states, their simple and reliable arrangement into linear structures enabling effective electronic communication is however more challenging. We propose to overcome this difficulty by generating such complexes within vertical nanochannels on electrode. Terpyridine ligands were firstly immobilized by combining a click chemistry azide/alkyne approach with an electrochemically-assisted self-assembly (EASA) method used to grow an oriented mesoporous silica membrane bearing azide groups which were further derivatized with 4′-ethynyl-terpyridine ligands. The resulting terpyridine-functionalized films were consecutively dipped in an aqueous solution of Fe(BF₄)₂ and then in a solution of terpyridine in acetonitrile to form the bis(terpyridine) iron (II) complexes in situ. The electrochromic properties of the films functionalized at various levels were examined by monitoring the changes in their UV/Vis spectra upon electrochemical oxidation at controlled potential of +1.2 V vs. Ag/AgCl. Due to facile charge delocalization during the Fe²⁺ to Fe³⁺ redox process, the bis(terpyridine) iron (II) functionalized silica films exhibited electrochromic properties by changing from violet to non-colored using TBABF₄ in acetonitrile as an electrolyte. The bis(terpyridine) iron(II) film experienced reversible electrochromic switching by applying +0.5 V in a reverse reduction electrochemical process. The Fe(tpy)₂-functionalized silica thin films displayed a good contrast ratio (ΔT%) of 47% and relatively high coloration efficiency (CE) of about 245 cm²/C with a response time of coloring and bleaching of a few seconds (< 4 s).

Renaissance of Stöber method for synthesis of colloidal particles: New developments and opportunities

Colloidal silica particles have received a widespread interest because of their potential applications in adsorption, ceramics, catalysis, drug delivery and more. Among many approaches towards fabrication of these colloidal particles, Stöber, Fink and Bohn (SFB) method, known as Stöber synthesis is an effective sol-gel strategy for production of uniform, monodispersed silica particles with highly tailorable size and surface properties. This review, after a brief introduction showing the importance of colloidal chemistry, is focused on the Stöber synthesis of silica spheres including discussion of the key factors affecting their particle size, porosity and surface properties. Next, further developments of this method are presented toward fabrication of polymer, carbon, and composite spheres.

Blue-emitting NH4+-doped MAPbBr3 perovskite quantum dots with near unity quantum yield and super stability

Novel NH₄⁺-doped MA_1-x(NH₄)_xPbBr₃ perovskite quantum dots were synthesized at room temperature. The introduction of NH₄⁺ results in larger lattice formation energy and better crystallinity of MA_1-x(NH₄)_xPbBr₃, which greatly reduces the defect density and inhibits non-radiative recombinations, and thus helps in achieving excellent stability and near unity blue-emitting photoluminescence quantum yields.

Metal Halide Perovskite Nanocrystals in Metal-Organic Framework Host: Not Merely Enhanced Stability

As an emerging optical material, perovskite nanocrystals (NCs) exhibit excellent optoelectronic properties and show great potential for various optoelectronic applications. However, the inherent inferior stability against moisture, oxygen, light and heat limit their practical application. As well, the exploration and development of perovskite NCs with novel properties and functions are new challenges. To achieve these goals, the integration and encapsulation of perovskite NCs with multifunctional metal-organic frameworks (MOFs) to form perovskite NC@MOF composites, is a promising strategy for enhancing the stability and broadening the application scope. In this minireview, we summarize and discuss the synthesis strategies and functional mechanisms of perovskite NC@MOF composites, along with applications of light emitting diodes (LED), information security, photocatalysis, sensing, and detection. We further briefly point out the current challenges as well as the future opportunities for the emerged composite materials.

Liquid-Phase Synthesis of Iron Oxide Nanostructured Materials and Their Applications

Owing to their high natural abundance, low cost, easy availability, and excellent magnetic properties, considerable interest has been devoted to the synthesis and applications of iron oxide nanostructured materials. Liquid-phase synthesis methods are economical and environmentally friendly with low energy consumption and volatile emissions, and as such have received much attention for the preparation of iron oxide nanostructured materials. Herein, the liquid-phase synthesis methods of iron oxide nanostructured materials including the co-precipitation method, microemulsion method, conventional hydrothermal and solvothermal methods, microwave-assisted heating method, sonolysis method, and other methods are summarized and reviewed. Many iron oxide nanostructured materials, self-assembled nanostructures, and nanocomposites have been successfully prepared, which are of great significance to enhance their structure-dependent properties and applications. The specific roles of liquid-phase chemical reaction parameters in regulating the chemical composition, structure, crystallinity, morphology, particle size, and dispersive behavior of the as-prepared iron oxide nanostructured materials are emphasized. The biomedical, environmental, and electrochemical energy storage applications of iron oxide nanostructured materials are discussed. Finally, challenges and perspectives are proposed for future investigations on the liquid-phase synthesis and applications of iron oxide nanostructured materials.

Micro- and Nanopatterning of Halide Perovskites Where Crystal Engineering for Emerging Photoelectronics Meets Integrated Device Array Technology

Tremendous efforts have been devoted to developing thin film halide perovskites (HPs) for use in high-performance photoelectronic devices, including solar cells, displays, and photodetectors. Furthermore, structured HPs with periodic micro- or nanopatterns have recently attracted significant interest due to their potential to not only improve the efficiency of an individual device via the controlled arrangement of HP crystals into a confined geometry, but also to technologically pixelate the device into arrays suitable for future commercialization. However, micro- or nanopatterning of HPs is not usually compatible with conventional photolithography, which is detrimental to ionic HPs and requires special techniques. Herein, a comprehensive overview of the state-of-the-art technologies used to develop micro- and nanometer-scale HP patterns, with an emphasis on their controlled microstructures based on top-down and bottom-up approaches, and their potential for future applications, is provided. Top-down approaches include modified conventional lithographic techniques and soft-lithographic methods, while bottom-up approaches include template-assisted patterning of HPs based on lithographically defined prepatterns and self-assembly. HP patterning is shown here to not only improve device performance, but also to reveal the unprecedented functionality of HPs, leading to new research areas that utilize their novel photophysical properties.

Synthesis of Mn-doped CsPbClxBr3−x perovskite nanocrystals using ultrasonic irradiation-promoted with decrease of reaction order

The incorporation of impurity cation as a way of introducing various novel functionalities provides an additional level of control over the electronic and optical properties of perovskite nanocrystals (NCs). However, the conventional post-synthetic cation exchange approaches suffer from large time and energy consumption. In this work, we developed a novel one-pot method to synthesize Mn-doped CsPbClxBr3−x NCs by merit of sonochemical technique, achieving dramatically rapid reduce of time and energy consumption. The localized hot spots with high transient temperature, pressure, and cooling rate, as well as an excellent stirring action of ultrasonic preparation facilitate the diffusion of Mn2+ in perovskite lattice. Besides, further reaction kinetics investigation reveals an apparent decrease of reaction order from original method (2.4) to our ultrasound-assisted method (1.0).

Hollow metal halide perovskite nanocrystals with efficient blue emissions

Metal halide perovskite nanocrystals (NCs) have emerged as new-generation light-emitting materials with narrow emissions and high photoluminescence quantum efficiencies (PLQEs). Various types of perovskite NCs, e.g., platelets, wires, and cubes, have been discovered to exhibit tunable emissions across the whole visible spectrum. Despite remarkable advances in the field of perovskite NCs, many nanostructures in inorganic NCs have not yet been realized in metal halide perovskites, and producing highly efficient blue-emitting perovskite NCs remains challenging and of great interest. Here, we report the discovery of highly efficient blue-emitting cesium lead bromide (CsPbBr₃) perovskite hollow NCs. By facile solution processing of CsPbBr₃ precursor solution containing ethylenediammonium bromide and sodium bromide, in situ formation of hollow CsPbBr₃ NCs with controlled particle and pore sizes is realized. Synthetic control of hollow nanostructures with quantum confinement effect results in color tuning of CsPbBr₃ NCs from green to blue, with high PLQEs of up to 81%.

A Supported Bismuth Halide Perovskite Photocatalyst for Selective Aliphatic and Aromatic C-H Bond Activation

Direct selective oxidation of hydrocarbons to oxygenates by O2 is challenging. Catalysts are limited by the low activity and narrow application scope, and the main focus is on active C-H bonds at benzylic positions. In this work, stable, lead-free, Cs3 Bi2 Br9 halide perovskites are integrated within the pore channels of mesoporous SBA-15 silica and demonstrate their photocatalytic potentials for C-H bond activation. The composite photocatalysts can effectively oxidize hydrocarbons (C5 to C16 including aromatic and aliphatic alkanes) with a conversion rate up to 32900 μmol gcat -1  h-1 and excellent selectivity (>99 %) towards aldehydes and ketones under visible-light irradiation. Isotopic labeling, in situ spectroscopic studies, and DFT calculations reveal that well-dispersed small perovskite nanoparticles (2-5 nm) possess enhanced electron-hole separation and a close contact with hydrocarbons that facilitates C(sp3 )-H bond activation by photoinduced charges.

An enhanced recyclable 3D adsorbent for diverse bio-applications using biocompatible magnetic nanomulberry and cucurbituril composites

Herein, we describe the synthesis of highly water-dispersible and biocompatible 3D adsorbents via a rapid two-step strategy employing a mesoporous magnetic nanomulberry-shaped Fe₃O₄ (MNM) on diatomaceous earth (DE) and cucurbituril (CB; MNM-DE-CB). Coating of CB on the surface of MNM-DE via hydrogen bonds not only enhanced the dispersibility of CB, but also improved the stability of MNM-DE. The ability of the adsorbent to remove dyes from water was investigated as a function of metal ions, solution pH, temperature, and concentration to determine optimum reaction conditions. Unlike MNM-DE, MNM-DE-CB exhibited highly efficient, rapid dye removal and recyclability in aqueous solution, and low cytotoxicity toward cancer cells in drug delivery tests. MNM-DE-CB is a promising green adsorbent with potential for diverse applications including water remediation, interface catalysis, bio-sample preparation, and drug delivery.

Pore Confinement-Enhanced Electrochemiluminescence on SnO2 Nanocrystal Xerogel with NO3- As Co-Reactant and Its Application in Facile and Sensitive Bioanalysis

Herein, 10-fold electrochemiluminescence (ECL) enhancement from a porous SnO₂ nanocrystal (SnO₂ NC) xerogel (vs discrete SnO₂ NCs) was first observed with NO₃^- as a novel coreactant. This new booster phenomenon caused by pore characteristic was defined as "pore confinement-induced ECL enhancement", which originated from two possible reasons: First, the SnO₂ NC xerogel with hierarchically porous structure could not only localize massive luminophore near the electrode surface, more importantly, but could accelerate the electrochemical and chemiluminescence reaction efficiency because the pore channels of xerogel could promote the mass transport and electron transfer in the confined spaces. Second, the NO₃^- could be in situ reduced easily to the active nitrogen species by means of the pore confinement effect, which could be served as a new coreactant for nanocrystal-based ECL amplification with the excellent stability and good biocompatibility. As a proof of concept, a facile and sensitive sensing platform for SO₃^2- detection has been successfully constructed upon effectively quenching of SO₃^2- toward the SnO₂ NC xerogel/NO₃^- ECL system. The key feature about this work presented a grand avenue to achieve the strong ECL signal, especially from weak emitters, which gave a fresh impetus to the construction of new-generation of surface-confined ECL platform with potential applications in ECL imaging and sensing.

Strongly quantum-confined Mn2+-doped CsPbBr3 nanocrystals in MCM-41 with pure blue emission

We synthesized 465 nm pure blue light-emitting Mn²⁺-doped CsPbBr₃ nanocrystals via a template-assisted strategy without the coprecipitation of bulk materials.