Room-Temperature Functionalization of N2 to Borylamine at a Molybdenum Complex

N2 Functionalization via Molybdenum-Nitride Complex: Stepwise BH Bond Additions

Reactivity of (triphosphine)MoIV-nitrido complex generated by N2 splitting, toward boranes is reported. The simple adduct Mo≡N→BH3 is observed with BH3.SMe2 while 1,2 addition is evidenced with 9-BBN leading to H-Mo=NBR2. A second addition of BH3.SMe2 is facile and forms an unprecedented complex featuring two bridging H between two B and the Mo centers. Addition of PMe3 or BH3.SMe2 promotes reductive elimination and N-H bond formation. The full sequence of functionalization at Mo≡N obtained after N2 splitting is therefore evidenced in this work.

To Split or Not to Split: [AsCCAs]-Coordinated Mo, W, and Re Complexes and Their Reactivity toward Molecular Dinitrogen

Molybdenum, tungsten, and rhenium halides bearing a 2,2'-(iPr2As)2-substituted diphenylacetylene ([AsCCAs], 1-As) were prepared and reduced under an atmosphere of dinitrogen in order to activate the latter substrate. In the case of molybdenum, a diiodo (2-As) and a triiodo molybdenum precursor (5) were equally suited for reductive N2 splitting, which led to the isolation of [AsCCAs]Mo≡N(I) (3-As) in each case. For tungsten, [AsCCAs]WCl3 (6) was reduced under N2 to afford {[AsCCAs]WCl2}2(N2) (7), which is best described as a dinuclear π8δ4-configured μ-(η1: η1)-N2-bridged dimer. Attempts to reductively cleave the N2 unit in 7 did not lead to the expected tungsten nitride (8), which had to be prepared independently via the treatment of 7 with sodium azide. To arrive at a π10δ4-configured N2-bridged dimer in a tetragonally distorted ligand environment, [AsCCAs]ReCl3 (9) was reduced in the presence of N2. As expected, a μ-(η1: η1)-N2-bridged dirhenium species, namely, {[AsCCAs]ReCl2}2(N2) (10), was formed, but found to very quickly decompose (presumably via loss of N2), not only under reduced pressure, but also upon irradiation or heating. Hence, an alternative synthetic route to the originally envisioned nitride, [AsCCAs]Re≡N(Cl)2 (11), was developed. While all the aforementioned nitrides (3-As, 8, and 11) were found to be fairly robust, significantly different stabilities were noticed for {[AsCCAs]MCl2}2(N2) (7 for M = W, 10 for M = Re), which is ascribed to the electronically different MN2M cores (π8δ4 for 7 vs π10δ4 for 10) in these μ-(η1: η1)-N2-bridged dimers.

Boron Insertion into the N≡N Bond of a Tungsten Dinitrogen Complex

The 1,3-addition of 1,2-diaryl-1,2-dibromodiboranes (B2Br2Ar2) to trans-[W(N2)2(dppe)2] (dppe = κ2-(Ph2PCH2)2), which is accompanied by a Br-Ar substituent exchange between the two boron atoms, is followed by a spontaneous rearrangement of the resulting tungsten diboranyldiazenido complex to a 2-aza-1,3-diboraallenylimido complex displaying a linear, cumulenic B=N=B moiety. This rearrangement involves the splitting of both the B-B and N=N bonds of the N2B2 ligand, formal insertion of a BAr boranediyl moiety into the N=N bond, and coordination of the remaining BArBr boryl moiety to the terminal nitrogen atom. Density functional theory calculations show that the reaction proceeds via a cyclic NB2 intermediate, followed by dissociation into a tungsten nitrido complex and a linear boryliminoborane, which recombine by adduct formation between the nitrido ligand and the electron-deficient iminoborane boron atom. The linear B=N=B moiety also undergoes facile 1,2-addition of Brønsted acids (HY = HOPh, HSPh, and H2NPh) with concomitant Y-Br substituent exchange at the terminal boron atom, yielding cationic (borylamino)borylimido tungsten complexes.

Facile Addition of B-H and B-B Bonds to an Iron(IV) Nitride Complex

The nitride ligand in the iron(IV) complex PhB(ⁱPr₂Im)₃Fe≡N reacts with boron hydrides to afford PhB(ⁱPr₂Im)₃FeN(B)H (B = 9-BBN (1), Bpin (2)) and with (Bpin)₂ to afford PhB(ⁱPr₂Im)₃FeN(Bpin)₂ (3). The iron(II) borylamido products have all been structurally and spectroscopically characterized, demonstrating facile insertion into B-H and B-B bonds by PhB(ⁱPr₂Im)₃Fe≡N. Density functional theory (DFT) calculations reveal that the quintet state (S = 2) is significantly lower in energy than the singlet (S = 0) and triplet (S = 1) states for all products. Stoichiometric reaction with (Bpin)₂ does not produce the mono-borylated iron imido species PhB(ⁱPr₂Im)₃FeN(Bpin). DFT calculations suggest that this is because PhB(ⁱPr₂Im)₃FeN(Bpin) is unstable toward disproportionation to the starting iron(IV) nitride and PhB(ⁱPr₂Im)₃FeN(Bpin)₂. Attempts at B-C bond insertion using phenyl- and benzyl-pinacol borane were unsuccessful, which we attribute to unfavorable kinetics.

Lewis Acid-Induced Dinitrogen Cleavage in an Anionic Side-on End-on Bound Dinitrogen Diniobium Hydride Complex

The side-on end-on dinitrogen hydride complex [{Na(dme)}₂{(O₃)Nb}₂(μ-η¹:η²-N₂)(μ-H)₂] (3-Na, [O₃]³⁻ = [(3,5-^tBu₂-2-O-C₆H₂)₃CH]³⁻) was observed to undergo facile elimination of H₂ and cleavage of the N–N bond in the presence of 9-borabicyclo[3.3.1]nonane (9-BBN), AlMe₃, and ZnMe₂. Treatment of 3-Na with 9-BBN and ZnMe₂ afforded the nitride complex [{K(dme)₂}₂{(O₃)Nb}₂(μ-N)₂] (2-Na). The reaction of 3-Na with AlMe₃ afforded [{Na(dme)}₂{(O₃)AlMe}₂(NbMe₂)₂(μ-N)₂] (5). The nitride complex 2-Na was treated with 9-BBN and AlMe₃ to form [{Na(dme)}₂{(O₃)Nb}(μ-NH)(μ-NBC₈H₁₄){Nb(O₃C)}] (4) and 5, respectively. Complex 2-Na, 4, and 5 were structurally characterized.

Spontaneous N2-diboranylation of [W(N2)2(dppe)2] with B2Br4(SMe2)2

The 1,3-bromoboration of [W(N₂)₂(dppe)₂] (dppe = 1,2-bis(diphenylphosphino)ethane) with B₂Br₄(SMe₂)₂ in the presence of various Lewis bases L yields diboranyldiazenido complexes, with L coordinating either at the terminal or internal boron atom. The 2 : 1 reaction of [W(N₂)₂(dppe)₂] and B₂Br₄(SMe₂)₂ yields a 1,2-bis(diazenido)diborane-bridged ditungsten complex with a fully planar π-conjugated BrWN₂B₂Br₂N₂WBr core.

N2 Cleavage on d4/d4 Molybdenum Centers and Its Further Conversion into Iminophosphorane under Mild Conditions

The synthesis of N-containing organophosphine compounds using N₂ as the nitrogen source under mild conditions has attracted much attention. Herein, the conversion of N₂ into iminophosphorane was reported. By visible light irradiation, N₂ was split on a Mo^II complex bearing a PNCNP ligand, directly forming the Mo^V nitride. After the N-P bond formation on the terminal nitride, the N atom from N₂ was ultimately transferred into iminophosphorane. Key intermediates were characterized.

Recent advances in metal-mediated nitrogen oxyanion reduction using reductively borylated and silylated N-heterocycles

The reduction of nitrogen oxyanions is critical for the remediation of eutrophication caused by anthropogenic perturbations to the natural nitrogen cycle. There are many approaches to nitrogen oxyanion reduction, and here we report our advances in reductive deoxygenation using pre-reduced N-heterocycles. We show examples of nitrogen oxyanion reduction using Cr, Fe, Co, Ni, and Zn, and we evaluate the role of metal choice, number of coordinated oxyanions, and ancillary ligands on the reductive transformations. We report the experimental challenges faced and provide an outlook on new directions to repurpose nitrogen oxyanions into value-added products.

Efficient transfer hydrogenation of ketones by molybdenum complexes through comprehensively verifying auxiliary ligands

Molybdenum complexes, ligated with N1,N1-dialkyl-N2-(5,6,7,8-tetrahydroquinolin-8-yl)ethane-1,2-diamines along with auxiliary ligands, provide various structural features as [NNH/NNHN]Mo(CO)4/3 (Mo1 – Mo3), [NNHN]Mo(CO)2Br] (Mo4 – Mo5), [NNH]Mo(CO)(η3-C3H5)Br](Mo6) and [NNHN/S] Mo(CO)(PPh3)2] (Mo7 – Mo8). All...

Molybdenum-Mediated N2 -Splitting and Functionalization in the Presence of a Coordinated Alkyne

A new [PCCP]‐coordinated molybdenum platform comprising a coordinated alkyne was employed for the cleavage of molecular dinitrogen. The coordinated η²‐alkyne was left unaffected during this reduction. DFT calculations suggest that the reaction proceeds via an initially generated terminal N₂‐complex, which is converted to a dinuclear μ‐(η¹:η¹)‐N₂‐bridged intermediate prior to N−N bond cleavage. Protonation, alkylation and acylation of the resulting molybdenum nitrido complex led to the corresponding N‐functionalized imido complexes. Upon oxidation of the N‐acylated imido derivative in MeCN, a fumaronitrile fragment was built up via C−C coupling of MeCN to afford a dinuclear molybdenum complex. The key finding that the strong N≡N bond may be cleaved in the presence of a weaker, but spatially constrained C≡C bond contradicts the widespread paradigm that coordinated alkynes are in general more reactive than gaseous N₂.

Fixation of Dinitrogen at an Asymmetric Binuclear Titanium Complex

A new type of dititanium dinitrogen complex supported by a triphenolamine (TPA) ligand is reported. Analysis by single-crystal X-ray diffraction and Raman and NMR spectroscopy reveals different coordination geometries for the two titanium centers. Hence, coordination of TPA and a nitrogen ligand results in trigonal-bipyramidal geometry, while an octahedral titanium center is obtained upon additional coordination of an ethoxide generated upon C-O bond cleavage in a diethyl ether solvent molecule. The titanium complex successfully generates ammonia in the presence of an excess amount of PCy₃HI and KC₈ in 154% yield (per titanium atom). A titanium complex with a bulkier TPA does not form a dinitrogen complex, and mononuclear titanium dinitrogen complexes were not accessible, presumably because of the high tendency of early transition metals to form binuclear dinitrogen complexes.

Catalytic Reduction of N2 to Borylamine at a Molybdenum Complex

Catalytic formation of borylamines from atmospheric N₂ is achieved for the first time using a series of homogenous (triphosphine)Mo complexes. Stepwise functionalization of the (triphosphine)Mo-nitrido complex with chloroborane led to the synthesis of the imido complex. Electrochemical characterization of the (PPP)Mo-nitrido and (PPP)Mo-borylimido complexes showed that the latter is much more easily reduced.

Conversion of Dinitrogen into Nitrile: Cross-Metathesis of N2 -Derived Molybdenum Nitride with Alkynes

The direct synthesis of nitrile from N₂ under mild conditions is of great importance and has attracted much interest. Herein, we report a direct conversion of N₂ into nitrile via a nitrile-alkyne cross-metathesis (NACM) process involving a N₂ -derived Mo nitride. Treatment of the Mo nitride with alkyne in the presence of KOTf afforded an alkyne-coordinated nitride, which was then transformed into Mo^V carbyne and the corresponding nitrile upon 1 e^- oxidation. Both aryl- and alkyl-substituted alkynes underwent this process smoothly. Experiments and DFT calculations have proved that the oxidation state of the Mo center plays a crucial role. This method does not rely on the nucleophilicity of the N₂ -derived metal nitride, offering a novel strategy for N₂ fixation chemistry.

Transition metal-mediated dinitrogen functionalisation with boron

An overview of the available methods to functionalize dinitrogen with boron reagents using transition metal complexes is given.

Functionalization of N2 via Formal 1,3-Haloboration of a Tungsten(0) σ-Dinitrogen Complex

Boron tribromide and aryldihaloboranes were found to undergo 1,3-haloboration across one W-N≡N moiety of a group 6 end-on dinitrogen complex (i.e. trans-[W(N2 )2 (dppe)2 ]). The N-borylated products consist of a reduced diazenido unit sandwiched between a WII center and a trivalent boron substituent (W-N=N-BXAr), and have all been fully characterized by NMR and IR spectroscopy, elemental analysis, and single-crystal X-ray diffraction. Both the terminal N atom and boron center in the W-N=N-BXAr unit can be further derivatized using electrophiles and nucleophiles/Lewis bases, respectively. This mild reduction and functionalization of a weakly activated N2 ligand with boron halides is unprecedented, and hints at the possibility of generating value-added nitrogen compounds directly from molecular dinitrogen.

Redox-Controlled Reactivity at Boron: Parallels to Frustrated Lewis/Radical Pair Chemistry

We report the synthesis of new Lewis-acidic boranes tethered to redox-active vanadium centers, (Ph₂N)₃V(μ-N)B(C₆F₅)₂ (1a) and (N(CH₂CH₂N(C₆F₅))₃)V(μ-N)B(C₆F₅)₂ (1b). Redox control of the V^IV/V couple resulted in switchable borane versus "hidden" boron radical reactivity, mimicking frustrated Lewis versus frustrated radical pair (FLP/FRP) chemistry, respectively. Whereas heterolytic FLP-type addition reactions were observed with the V^V complex (1b) in the presence of a bulky phosphine, homolytic peroxide, or Sn-hydride bond cleavage reactions were observed with the V^IV complex, [CoCp₂^*][(N(CH₂CH₂N(C₆F₅))₃)V(μ-N)B(C₆F₅)₂] (3b), indicative of boron radical anion character. The extent of radical character was probed by spectroscopic and computational means. Together, these results demonstrate that control of the V^IV/V oxidation states allows these compounds to access reactivity observed in both FLP and FRP chemistry.

Dinitrogen activation by a penta-pyridyl molybdenum complex

A new dinitrogen (N₂) molybdenum(0) complex supported exclusively by pyridine ligands was synthesized.

Preparation and reactivity of molybdenum complexes bearing pyrrole-based PNP-type pincer ligand

Molybdenum complexes bearing an anionic pyrrole-based PNP-type pincer ligand have been prepared and have been found to work as catalysts for the conversion of N₂ into NH₃ under ambient conditions.