Covalent Organic Frameworks with Chirality Enriched by Biomolecules for Efficient Chiral Separation

Construction of dual-chiral covalent organic frameworks for enantioselective separation

Developing novel chiral stationary phases (CSPs) with versatility is of great importance in enantiomer separation. This study fabricated a dual-chiral covalent organic framework (PA-CA COF) via successive post-synthetic modifications. The chiral trans-1,2-cyclohexanediamine (CA) and (D)-penicillamine (PA) groups were periodically aligned within nanochannels of the COF, allowing selective recognition of enantiomers through intermolecular interactions. It can be a versatile high-performance liquid chromatography (HPLC) CSP for separating a wide range of enantiomers, including chiral pharmaceutical intermediates and chiral drugs. With separation performance comparable to commercial chiral columns and even greater versatility, the PA-CA COF@SiO2 column held promise for practical applications. Chiral separation results combined with molecular simulation indicated that the mixed mode of PA and CA resulted in the broad separation capability of PA-CA COF. The introduction of the dual-chiral COFs concept opens up a new avenue for chiral recognition and separation, holding great potential for practical enantiomer separation.

Enzyme Immobilization using Covalent Organic Frameworks: From Synthetic Strategy to COFs Functional Role

Enzymes, a class of biocatalysts, exhibit remarkable catalytic efficiency, specificity, and selectivity, governing many reactions that are essential for various cascades within living cells. The immobilization of structurally flexible enzymes on appropriate supports holds significant importance in facilitating biomimetic transformations in extracellular environments. Covalent organic frameworks (COFs) have emerged as ideal candidates for enzyme immobilization due to high surface tunability, diverse chemical/structural designs, exceptional stability, and metal-free nature. Various immobilization techniques have been proposed to fabricate COF-enzyme biocomposites, offering significant enhancements in activity and reusability for COF-immobilized enzymes as well as new insights into developing advanced enzyme-based applications. In this review, we provide a comprehensive overview of state-of-the-art strategies for immobilizing enzymes within COFs by focusing on their applicability and versatility. These strategies are systematically summarized and compared by categorizing them into postsynthesis immobilization and in situ immobilization, where their respective strengths and limitations are thoroughly discussed. Combined with an overview of critical emerging applications, we further elucidate the multifaceted roles of COFs in enzyme immobilization and subsequent applications, highlighting the advanced biofunctionality achievable through COFs.

Recent progress for chiral stationary phases based on chiral porous materials in high-performance liquid chromatography and gas chromatography separation

Chirality is a fundamental property of nature. Separation and analysis of racemates are of great importance in the fields of medicine and the production of chiral biopharmaceutical intermediates. Chiral chromatography has the characteristics of a wide separation range, fast separation speed, and high efficiency. The development and preparation of novel chiral stationary phases with good chiral recognition and separation capacity is the core and key of chiral chromatographic separation and analysis. In this work, the representative research progress of novel chiral porous crystal materials including chiral covalent organic frameworks, chiral porous organic cages, chiral metal-organic frameworks, and chiral metal-organic cages used as chiral stationary phases of capillary gas chromatography and high-performance liquid chromatography over the last 4 years is reviewed in detail. The chiral recognition and separation properties of the representative studies in this review are also introduced and discussed.

Carboxy-Functionalized Covalent Organic Framework as a Carrier for Lipase Immobilization and Its Application in Inhibitors Screening

Covalent organic frameworks (COFs) with large specific surface areas, high porosity, good stability, and designable structure are promising carriers for immobilized enzymes. It is important to explore lipase inhibitors from natural foods as lipase inhibitors are closely related to the treatment of obesity. In this work, a carboxyl functionalized covalent organic framework (TpBD-3COOH) was prepared by solvothermal method for covalent immobilization of porcine pancreatic lipase (PPL) and obtained the enzyme-decorated COF (PPL@COF). The immobilized lipase showed wider pH and temperature tolerance with the same optimal pH and temperature of 7.5 and 50 ℃ compared to free lipase. After 6 successive reuses, the PPL@COF maintained 53.0% of its original activity. Immobilized lipase also displayed enhanced storage stability (55.4% after 14 days at 4 ℃). When p-nitrophenyl acetate was applied as the substrate, the calculated Michaelis constant was 3.57 mM and the half maximal inhibitory concentration of orlistat was 3.20 μM. Finally, the PPL@COF was used for enzyme inhibitors screening from natural foods combined with UV spectrophotometry, and Hawthorn was screened for excellent lipase inhibitory activity.

Functional Covalent Organic Frameworks' Microspheres Synthesized by Self-Limited Dynamic Linker Exchange for Stationary Phases

Synthesizing uniform functional covalent organic framework (COF) microspheres is the prerequisite of applying COFs as novel stationary phases for liquid chromatography. However, the synthesis of functionalized COF microspheres is challenging due to the difficulty in maintaining microspheric morphology when conferring functions. Here, a facile and universal "self-limited dynamic linker exchange" strategy is developed to achieve surface functionalization of uniform COF microspheres. Six different types of COF microspheres are constructed, showing the universality and superiority of the strategy. The library of COF microspheres' stationary phases can be further enriched on demand by varying different functional building blocks. The "self-limited dynamic linker exchange" is attributed to the result of a delicate balance of reaction thermodynamics and molecular diffusion energy barrier. As a demonstration, the chiral functional COF microspheres are used as stationary phases of chiral chromatography and realized effective enantioseparation.

Polyaniline-Based Cationic Porous Organic Polymers for Fast and Efficient Anion-Exchange-Driven Capture of Cr2O7 2

Efficient treatment of wastewater contaminated with carcinogenic Cr(VI) has been a long-term challenge for both academic and industrial research efforts. Removal of Cr(VI) species by ion exchange is a relatively simple and efficient method, and its combination with highly tailorable nanomaterials is promising for the treatment of such wastewater. Here, we report a type of cationic porous organic polymer (POP), namely, PTPA-PIP, which can be prepared simply by converting the corresponding aromatic polyamine PTPA to its protonated form, thereby significantly increasing its hydrophilicity and ability to disperse homogeneously in water, crucial for application in water treatment. In addition to detailed characterization of the physicochemical properties of PTPA-PIP (including using Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), and solid-state NMR techniques), adsorption experiments demonstrate that PTPA-PIP removes low-concentration dichromate anions with very high performance, including excellent exchange capacity (maximum capacity of 230 mg Cr2O7 2-/g PTPA-PIP), ultrafast removal (initial adsorption rate of 83 mg g-1 min-1), excellent selectivity (∼10% loss of adsorption capacity in the presence of 40-fold concentration of competing anions), as well as superior reusability (reusable for at least 5 cycles without compromised performance). These results demonstrate that PTPA-PIP is an outstanding candidate for application in industrial settings for the effective removal of harmful Cr(VI) pollutants in wastewater.

Homochiral π-Rich Covalent Organic Frameworks Enabled Chirality Imprinting in Conjugated Polymers: Confined Polymerization and Chiral Memory from Scratch

Optically active π-conjugated polymers (OACPs) have garnered increasing research interest for their resemblance to biological helices and intriguing chirality-related functions. Traditional methods for synthesizing involve decorating achiral conjugated polymer architectures with enantiopure side substituents through complex organic synthesis. Here, we report a new approach: the templated synthesis of unsubstituted OACPs via supramolecularly confined polymerizations of achiral monomers within nanopores of 2D or 3D chiral covalent organic frameworks (CCOFs). We show that the chiral π-rich nanospaces facilitate the in situ enantiospecific polymerization and self-propagation, akin to nonenzymatic polymerase chain reaction (PCR) system, resulting in chiral imprinting. The stacked polymer chains are kinetically inert enough to memorize the chiral information after liberating from CCOFs, and even after treatment at temperature up to 200 °C. The isolated OACPs demonstrate robust enantiodiscrimination, achieving up to 85 % ee in separating racemic amino acids. This underscores the potential of utilizing CCOFs as templates for supramolecularly imprinting optical activity into CPs, paving the way for synthetic evolution and advanced functional exploration of OACPs.

Chiral-induced synthesis of chiral covalent organic frameworks core-shell microspheres for HPLC enantioseparation

Two chiral covalent organic frameworks (CCOFs) core-shell microspheres based on achiral organic precursors by chiral-induced synthesis strategy for HPLC enantioseparation are reported for the first time. Using n-hexane/isopropanol as mobile phase, various kinds of racemates were selected as analytes and separated on the CCOF-TpPa-1@SiO2 and CCOF-TpBD@SiO2-packed columns with a low column backpressure (3 ~ 9 bar). The fabricated two CCOFs@SiO2 chiral columns exhibited good separation performance towards various racemates with high column efficiency (e.g., 19,500 plates m-1 for (4-fluorophenyl)ethanol and 18,900 plates m-1 for 1-(4-chlorophenyl)ethanol) and good reproducibility. Some effects have been investigated such as the analyte mass and column temperature on the HPLC enantioseparation. Moreover, the chiral separation results of the CCOF-TpPa-1@SiO2 chiral column and the commercialized Chiralpak AD-H column show a good complementarity. This study demonstrates that the usage of chiral-induced synthesis strategy for preparing CCOFs core-shell microspheres as a novel stationary phase has a good application potential in HPLC.

Artemisinin: a novel chiral electrochemiluminescence luminophore-assisted enantiospecific recognition and mechanism identification

Exploring novel electrochemiluminescence (ECL) molecules with high efficiency and good stability in aqueous solutions is crucial for achieving highly sensitive detection of analytes. However, developing chiral luminophores with efficient ECL performance is still a challenge. Herein, we first uncover that artemisinin (ART), a well-known chiral antimalarial drug, features a strong ECL emission at 726 nm with the assistance of a co-reactant potassium persulfate (K2S2O8), and an ECL efficiency of 195.3%, compared to that of standard Ru(bpy)3Cl2/K2S2O8. Mechanistic studies indicate that the strong ECL signal of ART is generated when the excited state formed by the reduction of ART peroxide bonds and combination with persulfate returns to the ground state. Significantly, we found that the ECL sensor based on chiral ART could efficiently identify and detect chiral cysteine (Cys) through ECL signals, with a lower limit of detection of 3.7 nM for l-Cys. Density functional theory calculations and scanning electrochemical microscopy technology further confirm that the disparity in the ECL signals is attributed to the different affinity between chiral ART and d/l-Cys, resulting in distinct electron transfer rates. The study demonstrates a new role of ART in ECL investigation and for the first time, achieves the development of ART for the enantioselective recognition and sensitive detection of chiral substances. This will be of vital significance for ECL and chirality research.

Covalent Organic Frameworks Based Photoenzymatic Nano-reactor for Asymmetric Dynamic Kinetic Resolution of Secondary Amines

Bio-catalysis represents a highly efficient and stereoselective method for the synthesis of valuable chiral compounds, however, the poor stability and limited reaction types of free enzymes restrict their wide application in industrial production. In this work, to overcome these problems, a multifunctional photoenzymatic nanoreactor CALB@COF-Ir was developed through the encapsulation of Candida antarctica lipase B (CALB) in a photosensitive covalent organic framework COF-Ir. This bio-nanocluster serves as efficient catalysts in asymmetric dynamic kinetic resolution (DKR) of secondary amines to give a series of chiral amines in high yields (up to 99 %) and enantioselectivities (up to 99 % ee). The well-designed COF-Ir not only acts as safety cover to prevent CALB from deactivation but promotes racemization of secondary amines via photo-induced hydrogen atom transfer (HAT) process. Photoelectric characterization and TDDFT calculation revealed that (ppy)2Ir units in COF-Ir play crucial role in this photocatalytic system which enhance its photo-redox properties through facilitating the separation between photoelectrons (e-) and holes (h+). Furthermore, the heterogeneous photoenzymatic nanoreactor could be recycled for five rounds with slight decline of catalytic reactivity.

Preparation and evaluation of two chiral stationary phases based on imidazolyl-functionalized bromoethoxy pillar[5]arene-bonded silica

Chiral pillar[5]arene-based mesoporous silica, an emerging class of chiral structure, possesses excellent characteristics such as abundant chiral active sites, encapsulated cavity and excellent chiral modification, which make them a promising candidate as new chiral stationary phases (CSPs) in enantioseparation. In this study, two imidazole-containing (S)-1-(4-phenyl-1H-imidazol-2-yl)ethanamine and (S)-Histidinol were respectively modified to bromoethoxy pillar[5]arene-bonded silica to construct new chiral stationary phases (sPIE-BP5-Sil and sHol-BP5-Sil) for the separation and analysis of enantiomers. The separation conditions such as mobile phase composition, flow rate and temperature were optimized. Under optimal conditions, both sPIE-BP5-Sil and sHol-BP5-Sil showed good separation performance for different types of enantiomers. Interestingly, sPIE-BP5-Sil and sHol-BP5-Sil showed better enantioselectivity for chiral aromatic compounds and chiral aliphatic compounds, respectively. This enantioseparation result was closely related to the presence of additional aromatic rings and abundant hydroxyl groups in the side chains of the two chiral groups. In addition, the enantioseparation process was further studied by molecular docking simulation. Therefore, this work provided a new strategy for the preparation and application of imidazolyl-derived pillar[5]arene-based chiral stationary phases, which can be efficiently used for screening and separating enantiomers.

Chiral Memory in Dynamic Transformation from Porous Organic Cages to Covalent Organic Frameworks for Enantiorecognition Analysis

The preservation of chirality during a transformation process, known as the "chiral memory" effect, has garnered significant attention across multiple research disciplines. Here, we first report the retention of the original chiral structure during dynamic covalent chemistry (DCC)-induced structural transformation from porous organic cages into covalent organic frameworks (COFs). A total of six two-dimensional chiral COFs constructed by entirely achiral building blocks were obtained through the DCC-induced substitution of chiral linkers in a homochiral cage (CC3-R or -S) using achiral amine monomers. Homochirality of these COFs resulted from the construction of 3-fold-symmetric benzene-1,3,5-methanimine cores with a propeller-like configuration of one single-handedness throughout the cage-to-COF transformation. The obtained chiral COFs can be further utilized as fluorescence sensors or chiral stationary phases for gas chromatography with high enantioselectivity. The present study thus highlighted the great potential to expand the scope of functional chiral materials via DCC-induced crystal-to-crystal transformation with the chiral memory effect.

Covalent organic frameworks: spotlight on applications in the pharmaceutical arena

Covalent organic frameworks (COFs) have much potential in the field of analytical separation research due to their distinctive characteristics, including easy modification, low densities, large specific surface areas and permanent porosity. This article provides a historical overview of the synthesis and broad perspectives on the applications of COFs. The use of COF-based membranes in gas separation, water treatment (desalination, heavy metals and dye removal), membrane filtration, photoconduction, sensing and fuel cells is also covered. However, these COFs also demonstrate great promise as solid-phase extraction sorbents and solid-phase microextraction coatings. In addition to various separation applications, this work aims to highlight important advancements in the synthesis of COFs for chiral and isomeric compounds.

Strategies for utilizing covalent organic frameworks as host materials for the integration and delivery of bioactives

Covalent organic frameworks (COFs), a new and developing class of porous framework materials, are considered a type of promising carrier for the integration and delivery of bioactives, which have diverse fascinating merits, such as a large specific surface area, designable and specific porosity, stable and orderly framework structure, and various active sites. However, owing to the significant differences among bioactives (including drugs, proteins, nucleic acid, and exosomes), such as size, structure, and physicochemical properties, the interaction between COFs and bioactives also varies. In this review, we firstly summarize three strategies for the construction of single or hybrid COF-based matrices for the delivery of cargos, including encapsulation, covalent binding, and coordination bonding. Besides, their smart response release behaviors are also categorized. Subsequently, the applications of cargo@COF biocomposites in biomedicine are comprehensively summarized, including tumor therapy, central nervous system (CNS) modulation, biomarker analysis, bioimaging, and anti-bacterial therapy. Finally, the challenges and opportunities in this field are briefly discussed.

Biomolecules meet organic frameworks: from synthesis strategies to diverse applications

Biomolecules are essential in pharmaceuticals, biocatalysts, biomaterials, etc., but unfortunately they are extremely susceptible to extraneous conditions. When biomolecules meet porous organic frameworks, significantly improved thermal, chemical, and mechanical stabilities are not only acquired for raw biomolecules, but also molecule sieving, substrate enrichment, chirality property, and other functionalities are additionally introduced for application expansions. In addition, the intriguing synergistic effect stemming from elaborate and concerted interactions between biomolecules and frameworks can further enhance application performances. In this paper, the synthesis strategies of the so-called bio-organic frameworks (BOFs) in recent years are systematically reviewed and classified. Additionally, their broad applications in biomedicine, catalysis, separation, sensing, and imaging are introduced and discussed. Before ending, the current challenges and prospects in the future for this infancy-stage but significant research field are also provided. We hope that this review will offer a concise but comprehensive vision of designing and constructing multifunctional BOF materials as well as their full explorations in various fields.

Raising the Asymmetric Catalytic Efficiency of Chiral Covalent Organic Frameworks by Tuning the Pore Environment

Chiral covalent organic frameworks (COFs) hold considerable promise in the realm of heterogeneous asymmetric catalysis. However, fine-tuning the pore environment to enhance both the activity and stereoselectivity of chiral COFs in such applications remains a formidable challenge. In this study, we have successfully designed and synthesized a series of clover-shaped, hydrazone-linked chiral COFs, each with a varying number of accessible chiral pyrrolidine catalytic sites. Remarkably, the catalytic efficiencies of these COFs in the asymmetric aldol reaction between cyclohexanone and 4-nitrobenzaldehyde correlate well with the number of accessible pyrrolidine sites within the frameworks. The COF featuring nearly one pyrrolidine moiety at each nodal point demonstrated excellent reaction yields and enantiomeric excess (ee) values, reaching up to 97 and 83%, respectively. The findings not only underscore the profound impact of a deliberately controlled chiral pore environment on the catalytic efficiencies of COFs but also offer a new perspective for the design and synthesis of advanced chiral COFs for efficient asymmetric catalysis.

Ionic Liquid-Mediated Dynamic Polymerization for Facile Aqueous-Phase Synthesis of Enzyme-Covalent Organic Framework Biocatalysts

Utilizing covalent organic framework (COF) as a hypotoxic and porous scaffold to encapsulate enzyme (enzyme@COF) has inspired numerous interests at the intersection of chemistry, materials, and biological science. In this study, we report a convenient scheme for one-step, aqueous-phase synthesis of highly crystalline enzyme@COF biocatalysts. This facile approach relies on an ionic liquid (2 μL of imidazolium ionic liquid)-mediated dynamic polymerization mechanism, which can facilitate the in situ assembly of enzyme@COF under mild conditions. This green strategy is adaptive to synthesize different biocatalysts with highly crystalline COF "exoskeleton", as well evidenced by the low-dose cryo-EM and other characterizations. Attributing to the rigorous sieving effect of crystalline COF pore, the hosted lipase shows non-native selectivity for aliphatic acid hydrolysis. In addition, the highly crystalline linkage affords COF "exoskeleton" with higher photocatalytic activity for in situ production of H2 O2 , enabling us to construct a self-cascading photo-enzyme coupled reactor for pollutants degradation, with a 2.63-fold degradation rate as the poorly crystalline photo-enzyme reactor. This work showcases the great potentials of employing green and trace amounts of ionic liquid for one-step synthesis of crystalline enzyme@COF biocatalysts, and emphasizes the feasibility of diversifying enzyme functions by integrating the reticular chemistry of a COF.

Synergetic Multichiral Covalent Organic Framework for Enantioselective Recognition and Separation

In enantiomer recognition and separation, a highly enantioselective approach with universal applicability is urgently desired but hard to realize, especially in the case of chiral molecules. To resolve the trade-off between enantioselectivity and universality, a glutathione (GSH) and methylated cyclodextrins (MCD)-functionalized covalent organic framework (GSH-MCD COF) with porosity and abundant chiral surfaces is presented that was designed and synthesized for recognition and separation of various enantiomers. As expected, the GSH-MCD COF can be used as chiral stationary phases for the separation of various enantiomers, including aromatic alcohols, aromatic acids, amides, amino acids, and organic acids, with performance and versatility even superior to some widely used commercial chiral chromatographic columns. Furthermore, the synthesized GSH-MCD COF shows high enantioselectivity for the rapid recognition and identification of enantiomers and chiral metabolites when coupling to Raman spectroscopy. Molecular simulations suggest that the COF provides a confined microenvironment for cyclodextrins and peptides that dictates the separation and recognition capability. This work provides a strategy to synthesize synergetic multichiral COF and achieve separations and recognitions of enantiomers in complex samples.

Ligating Catalytically Active Peptides onto Microporous Polymers: A General Route Toward Specifically-Functional High Surface Area Platforms

A versatile post-synthetic modification strategy to functionalize a high surface area microporous network (MPN-OH) by bio-orthogonal inverse electron-demand Diels-Alder (IEDDA) ligation is presented. While the polymer matrix is modified with a readily accessible norbornene isocyanate (Nor-NCO), a series of functional units presenting the robust asymmetric 1,2,4,5-tetrazine (Tz) allows easy functionalization of the MPN by chemoselective Nor/Tz ligation. A generic route is demonstrated, modulating the internal interfaces by introducing carboxylates, amides or amino acids as well as an oligopeptide d-Pro-Pro-Glu organocatalyst. The MPN-Pz-Peptide construct largely retains the catalytic activity and selectivity in an enantioselective enamine catalysis, demonstrates remarkable availability in different solvents, offers heterogeneous organocatalysis in bulk and shows stability in recycling settings.

Construction and Application of a Pepsin-Functionalized Covalent Organic Framework with Prominent Chiral Recognition Ability

The stable Pepsin@covalent organic framework (Pepsin@COF) were constructed base on matching COF pore diameter to pepsin dimension. It exhibits excellent chiral recognition capabilities (e. e. % up to 62.63 %) and potential for enantioseparation. Furthermore, a positive correlation between the immobilized enzyme activity and chiral recognition was revealed, offering insights for the design of biocatalytic nanosystems in chiral separation.

Integration of Enzyme and Covalent Organic Frameworks: From Rational Design to Applications

Manufacturing is undergoing profound transformations, among which green biomanufacturing with low energy consumption, high efficiency, and sustainability is becoming one of the major trends. However, enzymes, as the "core chip" of biomanufacturing, are often handicapped in their application by their high cost, low operational stability, and nonreusability. Immobilization of enzymes is a technology that binds or restricts enzymes in a certain area with solid materials, allows them to still carry out their unique catalytic reaction, and allows them to be recycled and reused. Compared with free enzymes, immobilized enzymes boast numerous advantages such as enhanced storage stability, ease of separation, reusability, and controlled operation. Currently, commonly used supports for enzyme immobilization (e.g., mesoporous silica, sol-gel hydrogels, and porous polymer) can effectively improve enzyme stability and reduce product inhibition. However, they still face drawbacks such as potential leaching or conformational change during immobilization and poor machining performance. Especially, most enzyme carrier solid materials possess disordered structures, inevitably introducing deficiencies such as low loading capacity, hindered mass transfer, and unclear structure-property relationships. Additionally, it remains a notable challenge to meticulously design immobilization systems tailored to the specific characteristics of enzyme/reaction. Therefore, there is a significant demand for reliable solid materials to overcome the above challenges. Crystalline porous materials, particularly covalent organic frameworks (COFs), have garnered significant interest as a promising platform for immobilizing enzymes due to their unique properties, such as their crystalline nature, high porosity, accessible active sites, versatile synthetic conditions, and tunable structure. COFs create a stabilizing microenvironment that protects enzymes from denaturation and significantly enhances reusability. Nevertheless, some challenges still remain, including difficulties in loading large enzymes, reduced enzyme activities, and the limited functionality of carriers. Therefore, it is essential to develop innovative carriers and novel strategies to broaden the methods of immobilizing enzymes, enabling their application across a more diverse array of fields.The integration of enzymes with advanced porous materials for intensified performance and diverse applications is still in its infancy, and our group has done a series of pioneering works. This Account presents a comprehensive overview of recent research progress made by our group, including (i) the development of innovative enzyme immobilization strategies utilizing COFs to make the assembly and integration of enzymes and carriers more effective; (ii) rational design and construction of functional carriers for enzyme immobilization using COFs; and (iii) extensions of immobilized enzyme applications based on COFs from industrial catalysis to biomedicine and chiral separation. The integration of enzymes with functional crystalline materials offers mutual benefits and results in a performance that surpasses what either component can achieve individually. Additionally, immobilized enzymes exhibit enhanced functionality and intriguing characteristics that differ from those of free enzymes. Consistent with our research philosophy centered on integration, platform development, and engineering application, this Account addresses the critical challenges associated with enzyme immobilization using COFs while extending the applications of COFs and proposing future design principles for biomanufacturing and enzyme industry.

Ionic liquid/covalent organic framework/silica composite material: Green synthesis and chromatographic evaluation

BACKGROUND

Due to their large surface area and distinctive adsorption affinity, covalent organic frameworks (COFs) appear to be good candidates as liquid chromatographic separation materials with good application prospect. The development of COF materials in chromatographic science is currently in an exploratory stage. Especially, the practicability of COF@silica composite materials as liquid chromatographic stationary phases needs further exploration. Reasonably integrating a functional component such as ionic liquid (IL) into the COF@silica composite materials may provide customized functionality to achieve the purpose of synthesizing multi-functional COF based stationary phases.

RESULTS

In this study, an IL modified COF bonded silica composite material (IL-COF@SiO2) was successfully synthesized by using an environmentally friendly deep eutectic solvent as the reaction medium instead of the frequently-used organic solvent. The synthesized IL-COF@SiO2 composite material combines the excellent separation ability of COF and the excellent mass transfer function of spherical porous silica microsphere, and meanwhile, the introduction of IL endows COF@SiO2 with preferable separation performance. The slurry-packed IL-COF@SiO2 liquid chromatographic column could be applied to effectively separate hydrophobic and hydrophilic compounds with preferable separation selectivity and high column efficiency. By investigating the retention behavior and influencing factors, a mixed-mode retention mechanism was found. Multiple interaction forces endow the IL-COF@SiO2 with a hydrophilic-hydrophobic balance performance, demonstrating a good application prospect as a versatile liquid chromatographic separation material.

SIGNIFICANCE

In this study, a new strategy is proposed for greenly synthesizing a novel IL-COF@SiO2 composite material under mild conditions, which expands the potential application of COF materials in chromatographic science. One particular point to note is that the reaction medium in each step of the preparation process is low toxic and degradable deep eutectic solvent, which conforms to the concept of green chemistry.

Engineering thiol-ene click chemistry for the preparation of a chiral stationary phase based on a [4+6]-type homochiral porous organic cage for enantiomeric separation in normal-phase and reversed-phase high performance liquid chromatography

In this study, a new chiral stationary phase (CSP) was fabricated by covalent bonding of a [4+6]-type homochiral porous organic cage (POC) CC19-R onto thiolated silica via a thiol-ene click reaction. The CC19-R was synthesized via Schiff-base reaction between 2-hydroxybenzene-1,3,5-tricarbaldehyde and (1R, 2R)-(-)-1,2-diaminocyclohexane. The enantioseparation capability of the resulting CC19-R-based CSP was systematically evaluated upon separating various chiral compounds or chiral pharmaceuticals in normal phase HPLC (NP-HPLC) and reversed phase HPLC (RP-HPLC), including alcohols, organic acids, ketones, diols, esters, and amines. Fifteen racemates were enantioseparated in NP-HPLC and 11 racemates in RP-HPLC. Some racemates have been well separated, such as 4-chlorobenzhydrol, cetirizine (in the form of dihydrochloride), 1,2-diphenyl-1,2-ethanediol, and 3-(benzyloxy)propane-1,2-diol whose resolution values reached 3.66, 4.23, 6.50, and 3.50, respectively. When compared with a previously reported chiral POC-based column (NC1-R column), eight racemates were not separated on the NC1-R column in NP-HPLC and five racemates were not separated in RP-HPLC, but were well resolved on this column, revealing that the enantioselectivity and separable range of chiral POCs-type columns could be significantly widened using this fabricated CC19-R column. Moreover, the resolution performance of the CC19-R column was also compared with commercial Chiralpak AD-H [CSP: Amylose tris(3,5-dimethylphenylcarbamate)] and Chiralcel OD-H [CSP: Cellulose tris(3,5-dimethylphenylcarbamate)] columns. The column also can separate some racemates that could not be separated or not well be separated by the two commercial columns, showing its good complementarity to the two commercial columns on chiral separation. In addition, the column also had good stability and reproducibility with the relative standard deviation (n = 5) of the retention time and resolution lower than 1.0% and 1.8%, respectively, after it had undergone multiple injections (100, 200, 300, and 400 times). This work indicated that the features of good resolution ability and simple synthesis methods using with this POC-based CSP provided chiral POCs with potential application prospects in HPLC racemic separation.

Enzyme immobilization on covalent organic framework supports

Enzymes are natural catalysts with high catalytic activity, substrate specificity and selectivity. Their widespread utilization in industrial applications is limited by their sensitivity to harsh reaction conditions and difficulties relating to their removal and re-use after the reaction is complete. These limitations can be addressed by immobilizing the enzymes in solid porous supports. Covalent organic frameworks (COFs) are ideal candidate carriers because of their good biocompatibility, long-term water stability and large surface area. In post-synthetic immobilization, the enzyme is added to an existing COF; this has had limited success because of enzyme leaching and pore blockage by enzymes that are too large. Direct-immobilization methods-building the COF around the enzyme-allow tailored incorporation of proteins of any size and result in materials with lower levels of leaching and better mass transport of reactants and products. This protocol describes direct-immobilization methods that can be used to fabricate enzyme@COF (@ = engulfing) biocomposites with rationally programmed structures and functions. If COF construction requires harsh reaction conditions, the enzyme can be protected by using a removable metal-organic framework. Alternatively, a direct in situ approach, in which the enzyme and the COF monomers assemble under very mild conditions, can be used. Examples of both approaches are described: enzyme@COF-42-B/43-B capsules (enzymes including catalase, glucose oxidase, etc.) with ZIF-90 or ZPF-2 as protectors, and lipase@NKCOF-98/99 via in situ direct-immobilization methods (synthesis timing: 30-100 min). Example assays for physical and functional characterization of the COF and enzyme@COF materials are also described.

Gradient Channel Segmentation in Covalent Organic Framework Membranes with Highly Oriented Nanochannels

Covalent organic frameworks (COFs) offer an exceptional platform for constructing membrane nanochannels with tunable pore sizes and tailored functionalities, making them promising candidates for separation, catalysis, and sensing applications. However, the synthesis of COF membranes with highly oriented nanochannels remains challenging, and there is a lack of systematic studies on the influence of postsynthetic modification reactions on functionality distribution along the nanochannels. Herein, we introduced a "prenucleation and slow growth" approach to synthesize a COF membrane featuring highly oriented mesoporous channels and a high Brunauer-Emmett-Teller surface area of 2230 m2 g-1. Functional moieties were anchored to the pore walls via "click" reactions and coordinated with Cu ions to serve as segmentation functions. This led to a remarkable H2/CO2 separation performance that surpassed the Robeson upper bound. Moreover, we found that the functionalities distributed along the nanochannels could be influenced by functionality flexibility and postsynthetic reaction rate. This strategy paved the way for the accurate design and construction of COF-based artificial solid-state nanochannels with high orientation and precisely controlled channel environments.

Improving the Bioactivity and Stability of Embedded Enzymes by Covalent Organic Frameworks

De novo embedding enzymes within reticular chemistry materials have shown the enhancement of physical and chemical stability for versatile catalytic reactions. Compared to metal-organic frameworks (MOFs), covalent organic frameworks (COFs) are usually considered to be the more superior host of enzymes because of their large channels with low diffusion barriers, outstanding chemical/thermal stability, and metal-free nature. However, detailed investigations on the comparison of COFs and MOFs in enhancing biocatalytic performance have not been explored. Here, we de novo encapsulated enzymes within two COFs via a mechanochemical strategy, which avoided the extreme synthetic conditions of COFs and highly maintained the biological activities of the embedded enzymes. The enzymes@COFs biocomposites exhibited a much higher activity (3.4-14.7 times higher) and enhanced stability than those in MOFs (ZIF-8, ZIF-67, HKUST-1, MIL-53, and CaBDC), and the rate parameter (kcat/Km) of enzyme@COFs was 41.3 times higher than that of enzyme@ZIF-8. Further explorations showed that the conformation of enzymes inside MOFs was disrupted, owing to the harmful interfacial interactions between enzymes and metal ions as confirmed by ATR-FTIR, fluorescence spectroscopy, and XPS data. In contrast, enzymes that were embedded in metal-free COFs highly preserved the natural conformation of free enzymes. This study provides a better understanding of the interfacial interactions between reticular supports and enzymes, which paves a new road for optimizing the bioactivities of immobilized enzymes.

Delivery of Small-Molecule Drugs and Protein Drugs by Injectable Acid-Responsive Self-Assembled COF Hydrogels for Combinatorial Lung Cancer Treatment

Covalent organic frameworks (COFs) have revealed enormous application prospects for cancer therapeutics recently, but their assembly systems face considerable challenges, such as the codelivery of hydrophobic and hydrophilic protein drugs with different physicochemical properties for in vivo delivery and release, as well as endosomal/lysosomal escape of protein drugs. To address these issues, we leveraged the high specific surface area, lipotropism, and structural tunability of boronate ester-linked COFs (COF-1) for the construction of advanced drug delivery systems. We first encapsulated the small-molecule drug doxorubicin (DOX) into a lipophilic COF (COF-1@DOX) and immobilized the functional protein drug ribonuclease A (RNase A) on the surface of the COF (RNase A-COF-1@DOX). We then created a novel composite delivery system (RNase A-COF-1@DOX gel) by cross-linking an albumin-oxygenated hydrogel (gel) network into the pores of COFs, allowing targeted codelivery of protein and small-molecule drugs in vivo. Using in-living body and multichannel fluorescence imaging, we analyzed the in vivo codelivery of protein and small-molecule drugs in a Lewis lung carcinoma (LLC) model. Finally, we applied the RNase A-COF-1@DOX gel to treat lung cancer in mice. This study paves an avenue for constructing COF-based drug delivery systems for lung cancer treatment and holds the potential to be extended to other types of cancer for more effective and targeted therapeutic treatments.

Chiral Materials: Progress, Applications, and Prospects

Chirality is a universal phenomenon in molecular and biological systems, denoting an asymmetric configurational property where an object cannot be superimposed onto its mirror image by any kind of translation or rotation, which is ubiquitous on the scale from neutrinos to spiral galaxies. Chirality plays a very important role in the life system. Many biological molecules in the life body show chirality, such as the "codebook" of the earth's biological diversity-DNA, nucleic acid, etc. Intriguingly, living organisms hierarchically consist of homochiral building blocks, for example, l-amino acids and d-sugars with unknown reason. When molecules with chirality interact with these chiral factors, only one conformation favors the positive development of life, that is, the chiral host environment can only selectively interact with chiral molecules of one of the conformations. The differences in chiral interactions are often manifested by chiral recognition, mutual matching, and interactions with chiral molecules, which means that the stereoselectivity of chiral molecules can produce changes in pharmacodynamics and pathology. Here, the latest investigations are summarized including the construction and applications of chiral materials based on natural small molecules as chiral source, natural biomacromolecules as chiral sources, and the material synthesized by design as a chiral source.

Review of covalent organic frameworks for enzyme immobilization: Strategies, applications, and prospects

Efficient enzyme immobilization systems offer a promising approach for improving enzyme stability and recyclability, reducing enzyme contamination in products, and expanding the applications of enzymes in the biomedical field. Covalent organic frameworks (COFs) possess high surface areas, ordered channels, optional building blocks, highly tunable porosity, stable mechanical properties, and abundant functional groups, making them ideal candidates for enzyme immobilization. Various COF-enzyme composites have been successfully synthesized, with performances that surpass those of free enzymes in numerous ways. This review aims to provide an overview of current enzyme immobilization strategies using COFs, highlighting the characteristics of each method and recent research applications. The future opportunities and challenges of enzyme immobilization technology using COFs are also discussed.

Cyclodextrin Incorporation into Covalent Organic Frameworks Enables Extensive Liquid and Gas Chromatographic Enantioseparations

The separation of enantiomers using high-performance chromatography technologies represents great importance and interest. In this aspect, β-cyclodextrin (β-CD) and its derivatives have been extensively studied as chiral stationary phases (CSPs). Nevertheless, β-CD that was immobilized on a traditional matrix often exhibited low stabilities and limited operating ranges. Recently, covalent organic frameworks (COFs) with highly ordered nanopores are emerging as promising CSPs for enantioseparations, but their practical applications are still hampered by the difficulty of monomer and COF synthesis. Herein, two β-CD-driven COFs are synthesized via a fast and facile plasma-induced polymerization combined postsynthesis modification strategy. The precisely defined COF channels enhanced the accessibility of the accommodated β-CD to the analytes and acted as robust protective barriers to safeguard the β-CD from harsh environments. Therefore, the β-CD-modified COFs can be potentially general CSPs for extensive enantioseparation in both gas chromatography and high-performance liquid chromatography, and a wide range of racemates were separated. Compared to the commonly employed commercial chiral columns, these COF-based columns exhibited comparable resolution capability and superior application versatility. This work integrates the advantages and overcomes the defects of COFs and β-CD, thus advancing COFs as platforms for chiral selector modification and giving great promise for practical chromatographic enantioseparation.

Hierarchical covalent organic framework-foam for multi-enzyme tandem catalysis

Covalent organic frameworks (COFs) are ideal host matrices for biomolecule immobilization and biocatalysis due to their high porosity, various functionalities, and structural robustness. However, the porosity of COFs is limited to the micropore dimension, which restricts the immobilization of enzymes with large volumes and obstructs substrate flow during enzyme catalysis. A hierarchical 3D nanostructure possessing micro-, meso-, and macroporosity could be a beneficial host matrix for such enzyme catalysis. In this study, we employed an in situ CO2 gas effervescence technique to induce disordered macropores in the ordered 2D COF nanostructure, synthesizing hierarchical TpAzo COF-foam. The resulting TpAzo foam matrix facilitates the immobilization of multiple enzymes with higher immobilization efficiency (approximately 1.5 to 4-fold) than the COF. The immobilized cellulolytic enzymes, namely β-glucosidase (BGL), cellobiohydrolase (CBH), and endoglucanase (EG), remain active inside the TpAzo foam. The immobilized BGL exhibited activity in organic solvents and stability at room temperature (25 °C). The enzyme-immobilized TpAzo foam exhibited significant activity towards the hydrolysis of p-nitrophenyl-β-d-glucopyranoside (BGL@TpAzo-foam: Km and Vmax = 23.5 ± 3.5 mM and 497.7 ± 28.0 μM min-1) and carboxymethylcellulose (CBH@TpAzo-foam: Km and Vmax = 18.3 ± 4.0 mg mL-1 and 85.2 ± 9.6 μM min-1 and EG@TpAzo-foam: Km and Vmax = 13.2 ± 2.0 mg mL-1 and 102.2 ± 7.1 μM min-1). Subsequently, the multi-enzyme immobilized TpAzo foams were utilized to perform a one-pot tandem conversion from carboxymethylcellulose (CMC) to glucose with high recyclability (10 cycles). This work opens up the possibility of synthesizing enzymes immobilized in TpAzo foam for tandem catalysis.

Covalent organic frameworks (COFs) core@shell nanohybrids: Novel nanomaterial support towards environmental sustainability applications

Covalent organic frameworks (COFs) based on core@shell nanohybrids have recently received significant attention and have become one of the most promising strategies for improving the stability and catalytic activity of COFs. Compared with traditional core@shell, COF-based core@shell hybrids own remarkable advantages, including size-selective reactions, bifunctional catalysis, and integration of multiple functions. These properties could enhance the stability and recyclability, resistance to sintering, and maximize the electronic interaction between the core and the shell. The activity and selectivity of COF-based core@shell could be simultaneously improved by taking benefit of the existing synergy between the functional encapsulating shell and the covered core material. Considering that, we have highlighted various topological diagrams and the role of COFs in COF-based core@shell hybrid for activity and selectivity enhancement. This concept article provides all-inclusive advances in the design and catalytic applications of COF-based core@shell hybrids. Various synthetic techniques have been developed for the facile tailoring of functional core@shell hybrids, including novel seed growth, in-situ, layer-by-layer, and one-pot method. Importantly, charge dynamics and structure-performance relationships are investigated through different characterization techniques. Different COF-based core@shell hybrids with established synergistic interactions have been detailed, and their influence on stability and catalytic efficiency for various applications is explained and discussed in this contribution. A comprehensive discussion on the remaining challenges associated with COF-based core@shell nanoparticles and research directions has also been provided to deliver insightful ideas for additional future developments.

Harnessing Self-Repairing and Crystallization Processes for Effective Enzyme Encapsulation in Covalent Organic Frameworks

Immobilization of fragile enzymes in crystalline porous materials offers new opportunities to expand the applications of biocatalysts. However, limited by the pore size and/or harsh synthesis conditions of the porous hosts, enzymes often suffer from dimension limitation or denaturation during the immobilization process. Taking advantage of the dynamic covalent chemistry feature of covalent organic frameworks (COFs), herein, we report a preprotection strategy to encapsulate enzymes in COFs during the self-repairing and crystallization process. Enzymes were first loaded in the low-crystalline polymer networks with mesopores formed at the initial growth stage, which could offer effective protection for enzymes from the harsh reaction conditions, and subsequently the encapsulation proceeded during the self-repairing and crystallization of the disordered polymer into the crystalline framework. Impressively, the biological activity of the enzymes can be well-maintained after encapsulation, and the obtained enzyme@COFs also show superior stability. Furthermore, the preprotection strategy circumvents the size limitation for enzymes, and its versatility was verified by enzymes with different sizes and surface charges, as well as a two-enzyme cascade system. This study offers a universal design idea to encapsulate enzymes in robust porous supports and holds promise for developing high-performance immobilized biocatalysts.

Postmodification of an Amine-Functionalized Covalent Organic Framework for Enantioselective Adsorption of Tyrosine

The development of chiral covalent organic frameworks (COFs) by postsynthetic modification is challenging due to the common occurrences of racemization and crystallinity decrement under harsh modification conditions. Herein, we employ an effective site-selective synthetic strategy for the fabrication of an amine-functionalized hydrazone-linked COF, NH₂-Th-Tz COF, by the Schiff-base condensation between aminoterephthalohydrazide (NH₂-Th) and 4,4',4″-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde (Tz). The resulting NH₂-Th-Tz COF with free amine groups on the pore walls provides an appealing platform to install desired chiral moieties through postsynthetic modification. Three chiral moieties including tartaric acid, camphor-10-sulfonyl chloride, and diacetyl-tartaric anhydride were postsynthetically integrated into NH₂-Th-Tz COF by reacting amine groups with acid, acyl chloride, and anhydride, giving rise to a series of chiral COFs with distinctive chiral pore surfaces. Moreover, the crystallinity, porosity, and chirality of chiral COFs were retained after modification. Remarkably, the chiral COFs exhibited an exceptional enantioselective adsorption capability toward tyrosine with a maximum enantiomeric excess (ee) value of up to 25.20%. Molecular docking simulations along with experimental results underscored the pivotal role of hydrogen bonds between chiral COFs and tyrosine in enantioselective adsorption. This work highlights the potential of site-selective synthesis as an effective tool for the preparation of highly crystalline and robust amine-decorated COFs, which offer an auspicious platform for the facile synthesis of tailor-made chiral COFs for enantioselective adsorption and beyond.

Chromatographic separation performance of silica microspheres surface-modified with triazine-containing imine-linked covalent organic frameworks

In this work, 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT) and 1,3,5-tris(4-formylphenyl)benzene (TFPB) were used as monomers to construct a triazine-containing imine-linked covalent organic framework (COF), which was then bonded onto the surface of aldehydized silica (SiO₂-CHO), and finally a COF@silica composite material (TAPT-TFPB COF@SiO₂) was successfully prepared. The chromatographic separation performance of SiO₂-CHO, TAPT-TFPB COF@SiO₂ and TAPT-TFPB COF@SiO₂/SiO₂-CHO (80/20, mass ratio) was evaluated and compared. It was found that separation efficiency was obviously enhanced by adding an appropriate amount of SiO₂-CHO into TAPT-TFPB COF@SiO₂. The obtained TAPT-TFPB COF@SiO₂/SiO₂-CHO showed more favorable separation ability than SiO₂-CHO and TAPT-TFPB COF@SiO₂. Various aromatic compounds including alkylbenzenes, polycyclic aromatic hydrocarbons, environmental endocrine disruptors, foodborne stimulants and phenyl ketones were effectively separated on the TAPT-TFPB COF@SiO₂/SiO₂-CHO column in reversed phase chromatography mode. The silica microspheres surface-modified with triazine-containing imine-linked COFs proved to be a new type of promising chromatographic packing materials.

Pore-in-Pore Engineering in a Covalent Organic Framework Membrane for Gas Separation

Covalent organic framework (COF) membranes have emerged as a promising candidate for energy-efficient separations, but the angstrom-precision control of the channel size in the subnanometer region remains a challenge that has so far restricted their potential for gas separation. Herein, we report an ultramicropore-in-nanopore concept of engineering matreshka-like pore-channels inside a COF membrane. In this concept, α-cyclodextrin (α-CD) is in situ encapsulated during the interfacial polymerization which presumably results in a linear assembly (LA) of α-CDs in the 1D nanochannels of COF. The LA-α-CD-in-TpPa-1 membrane shows a high H₂ permeance (∼3000 GPU) together with an enhanced selectivity (>30) of H₂ over CO₂ and CH₄ due to the formation of fast and selective H₂-transport pathways. The overall performance for H₂/CO₂ and H₂/CH₄ separation transcends the Robeson upper bounds and ranks among the most powerful H₂-selective membranes. The versatility of this strategy is demonstrated by synthesizing different types of LA-α-CD-in-COF membranes.

A chiral fluorescent COF prepared by post-synthesis modification for optosensing of imazamox enantiomers

We report a post-synthesis modification for the preparation of a novel chiral fluorescent covalent organic framework (COF) for selective recognization of imazamox enantiomers. In this study, chiral COF was firstly synthesized via a Schiff-base reaction between 2,5-dihydroxyterephthalaldehyde (Dha) and 1,3,5-tris(4-aminophenyl)benzene (Tab) followed by a nucleophilic substitution using (1S)-(+)-10-camphorsulfonyl chloride as chiral modifier. The resulting regular spherical chiral COF Dha Tab not only presented the high optical efficiency, strong covalent bond structure, good crystallinity, large specific surface area but also showed the specific enantioselectivity and quick identification for imazamox enantiomers among five pesticide enantiomers (S/R-imazamox, acephate, acetochlor, propisochlor and metalaxyl). The detection limits for S- and R-imazamox were 4.20 μmol/L and 3.03 μmol/L, respectively. Meanwhile, the enantiomeric excess value (5.30 %) manifested that the chiral COF Dha Tab had the strong adsorption ability to imazamox enantiomers and more higher affinity for R-imazamox. This chiral fluorescent COF opened up a new way for the recognition of enantiomers.

Structural Regulation of Thiophene-Based Two-Dimensional Covalent Organic Frameworks toward Highly Efficient Photocatalytic Hydrogen Generation

Two imine-based 2D covalent organic frameworks (COFs) with slight differences in their core structures are presented. The COF containing benzotrithiophene moieties with better planarity and π-conjugation (BTTh-TZ-COF) shows much better photocatalytic activity than the COF with trithienylbenzene cores (TThB-TZ-COF). Further photoelectrochemical study reveals the catalytic mechanism in more detail. Since other factors such as crystallinity, porosity, and optical bandgaps are equal, the different structures of the cores in the two similar COFs are the major contributors to the significantly different photocatalytic performance. The better electron delocalization of the planar trithiophene-based core and the enhanced D-A interactions between the triazine and trithiophene units in BTTh-TZ-COF create efficient charge separation and transfer, thus leading to superior photocatalytic hydrogen evolution activity. A new strategy for preparing high-performance organic photocatalysts for solar-energy conversion is revealed by this study.

Chiral covalent organic framework incorporated organic polymer monolithic capillary column for enantioseparations

A chiral covalent organic framework was synthesized, characterized, and incorporated into organic polymer monolithic capillary columns to provide chiral stationary phases for enantioseparations. The prepared monolithic capillary columns were characterized by scanning electron microscopy and elemental analysis. To obtain better enantioseparations, the columns' preparation conditions, and enantioseparation conditions were optimized. Baseline resolutions of several chiral compounds were obtained with good reproducibility and stability. Furthermore, the mechanism of chiral recognition was investigated using molecular docking with AutoDock. Docking results showed that the enantioselectivity factor rather than resolution is correlated with the binding free energy difference between enantiomers with the chiral covalent organic framework. And abundant acetoxy and nitrile groups as well as benzene rings in the chiral covalent organic framework are responsible for the enantioseparation ability of the chiral monolithic capillary columns.

Recent applications and chiral separation developments based on stationary phases in open tubular capillary electrochromatography (2019–2022)

Capillary electrochromatography (CEC) plays a significant role in chiral separation via the double separation principle, partition coefficient difference between the two phases, and electroosmotic flow-driven separation. Given the distinct properties of the inner wall stationary phase (SP), the separation ability of each SP differs from one another. Particularly, it provides large room for promising applications of open tubular capillary electrochromatography (OT-CEC). We divided the OT-CEC SPs developed over the past four years into six types: ionic liquids, nanoparticle materials, microporous materials, biomaterials, non-nanopolymers, and others, to mainly introduce their characteristics in chiral drug separation. There also added a few classic SPs that occurred within ten years as supplements to enrich the features of each SP. Additionally, we discuss their applications in metabolomics, food, cosmetics, environment, and biology as analytes in addition to chiral drugs. OT-CEC plays an increasingly significant role in chiral separation and may promote the development of capillary electrophoresis (CE) combined with other instruments in recent years, such as CE with mass spectrometry (CE/MS) and CE with ultraviolet light detector (CE/UV).

Chiral Covalent-Organic Framework MDI-β-CD-Modified COF@SiO2 Core-Shell Composite for HPLC Enantioseparation

The chiral covalent-organic framework (CCOF) is a new kind of chiral porous material, which has been broadly applied in many fields owing to its high porosity, regular pores, and structural adjustability. However, conventional CCOF particles have the characteristics of irregular morphology and inhomogeneous particle size distribution, which lead to difficulties in fabricating chromatographic columns and high column backpressure when the pure CCOFs particles are directly used as the HPLC stationary phases. Herein, we used an in situ growth strategy to prepare core-shell composite by immobilizing MDI-β-CD-modified COF on the surface of SiO₂-NH₂. The synthesized MDI-β-CD-modified COF@SiO₂ was utilized as a novel chiral stationary phase (CSP) to explore its enantiomeric-separation performance in HPLC. The separation of racemates and positional isomers on MDI-β-CD-modified COF@SiO₂-packed column (column A) utilizing n-hexane/isopropanol as the mobile phase was investigated. The results demonstrated that column A displayed remarkable separation ability for racemic compounds and positional isomers with good reproducibility and stability. By comparing the MDI-β-CD-modified COF@SiO₂-packed column (column A) with commercial Chiralpak AD-H column and the previously reported β-CD-COF@SiO₂-packed column (column B), the chiral recognition ability of column A can be complementary to that of Chiralpak AD-H column and column B. The relative standard deviations (RSDs) of the retention time and peak area for the separation of 1,2-bis(4-fluorophenyl)-2-hydroxyethanone were 0.28% and 0.79%, respectively. Hence, the synthesis of CCOFs@SiO₂ core-shell composites as the CSPs for chromatographic separation has significant research potential and application prospects.

Chiral covalent organic frameworks synthesized via a Suzuki–Miyaura-coupling reaction: enantioselective recognition of d/l-amino acids

A novel chiral COF was constructed via a Suzuki–Miyaura-coupling strategy for the chiral recognition and separation of amino acids.

A Targeted Review of Current Progress, Challenges and Future Perspective of g-C3 N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃ N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃ N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃ N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃ N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃ N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃ N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.

Preparation of spherical silica hydroxyl-functionalized covalent organic polymer composites for mixed-mode liquid chromatography

Covalent organic polymers are an emerging class of amorphous microporous materials that have raised increasing concerns in analytical chemistry due to their unique structural and surface chemical properties. However, the application of covalent organic polymers as mixed-mode stationary phases in chromatographic separations has rarely been reported. Herein, novel spherical silica hydroxyl-functionalized covalent organic polymer composites were successfully prepared via a layer-by-layer approach. The structure and morphology of the materials were carefully characterized by elemental analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, Brunauer-Emmett-Teller, and contact angle measurements. Baseline separations of various alkylbenzenes, polycyclic aromatic hydrocarbons, and nucleosides and bases were achieved on the prepared stationary phase under reversed-phase/hydrophilic interaction mode. The column efficiencies of 23 853 and 36 580 plates/m were obtained for butylbenzene and uracil, respectively, and the relative standard deviation of the retention time for continuous injections was less than 1.38% (n = 10), suggesting satisfactory column efficiency and repeatability. Additionally, this novel stationary phase realized the complete separation of the endocrine-disrupting chemicals in river water. This work affords a new route for synthesizing covalent organic polymers-based mixed-mode stationary phase and further reveals their great potential in chromatographic separation.

Fluoro-Functionalized Spherical Covalent Organic Frameworks as a Liquid Chromatographic Stationary Phase for the High-Resolution Separation of Organic Halides

The development of novel stationary phases with specific functionality is of great importance in chromatographic separation. Herein, we fabricated fluoro-functionalized spherical covalent organic frameworks (S_F-COFs) via a bottom-up strategy as stationary phases for high-performance liquid chromatography (HPLC). Benefiting from the significant monodispersity, narrow size distribution, and high fluorine content, the S_F-COFs packed column showed high column efficiency and excellent resolution for the separation of the organic fluorides involving polyfluorobenzenes, polychlorobenzenes, polybromobenzenes, perfluoroalkyl methacrylates, and halogenated trifluorotoluenes, which cannot be separated on the fluorine-free spherical covalent organic frameworks packed column. Especially, the column efficiency of 20 100-38 500 plates/m was obtained for polyfluorobenzenes, and the relative standard deviations of the retention time for continuous 10 separations of polychlorobenzenes and polybromobenzenes were less than 0.98%. Furthermore, the prepared S_F-COFs packed column showed overwhelming superiority in the separation of organic halides compared with commercial C18 and pentafluorophenyl (PFP) packed columns. In addition, the compounds with different hydrophobicity or aromatic ring structure were also successfully separated on the S_F-COFs packed column. This work extended the application of spherical COFs and provided a new way to introduce specific functional groups into the COF-based stationary phase for HPLC.

Chemically modified covalent organic frameworks for a healthy and sustainable environment: First-principles study

Pure water is a key element for a sustainable and healthy environment of human inhabitation. Since major sources of water contamination are industrially generated heavy metal cations there is great demand for efficient methods of their treatment. Here, using density functional theory, we investigate the covalent organic framework's electronic and optical properties and their interaction with the most dangerous heavy metal pollutants, namely Hg⁺², Pb^+2, and Cd⁺². We consider biphenyl boroxine covalent organic frameworks before and after chemical modification with CN, COOH, NH₂, and NO₂ groups. In addition to the molecular geometries, such parameters as the dipole moment, chemical potential, electronegativity, chemical hardness, and binding energy are calculated. It is found that CN, COOH, and NO₂ functional groups are favorable for intermolecular bonding with harmful transition metals. The functionalization with the mentioned groups reduces the band gap of the pristine covalent organic frameworks and increases their reactivity. As a result, strong complexes with Cd⁺², Hg⁺², and Pb⁺² can form, which, as follows from our calculations, can be detected by the red shift in their optical absorption spectra.

A Reversibly Porous Supramolecular Peptide Framework

The ability to use bio-inspired building blocks in the assembly of novel supramolecular frameworks is at the forefront of an exciting research field. Herein, we present the first polyproline helix to self-assemble into a reversibly porous, crystalline, supramolecular peptide framework (SPF). This framework is assembled from a short oligoproline, adopting the polyproline II conformation, driven by hydrogen-bonding and dispersion interactions. Thermal activation, guest-induced dynamic porosity and enantioselective guest inclusion have been demonstrated for this novel system. The principles of the self-assembly associated with this SPF will be used as a blueprint allowing for the further development of helical peptide linkers in the rational design of SPFs and metal-peptide frameworks.