Isolated Square-Planar Copper Center in Boron Imidazolate Nanocages for Photocatalytic Reduction of CO2 to CO

Strategies for Achieving Carbon Neutrality: Dual-Atom Catalysts in Focus

Carbon neutrality is a fundamental strategy for achieving the sustainable development of human society. Catalyzing CO2 reduction into various high-value-added fuels serves as an effective pathway to achieve this strategic objective. Atom-dispersed catalysts have received extensive attention due to their maximum atomic utilization, high catalytic selectivity, and exceptional catalytic performance. Dual-atom catalysts (DACs), as an extension of single-atom catalysts (SACs), not only retain the advantages of SACs, but also produce many new properties. This review initiates its exploration by elucidating the mechanism of CO2 reduction reaction (CO2RR) from CO2 adsorption and CO2 activation. Then, a comprehensive summary of recently developed preparation methods of DACs is presented. Importantly, the mechanisms underlying the promoted catalytic performance of DACs in comparison to SACs are subjected to a comprehensive analysis from adjustable adsorption capacity, tunable electronic structure, strong synergistic effect, and enhanced spacing effect, elucidating their respective superiorities in CO2RR. Subsequently, the application of DACs in CO2RR is discussed in detail. Conclusively, the prospective trajectories and inherent challenges of CO2RR are expounded upon concerning the continued advancement of DACs. This thorough review not only enhances the comprehension of DACs within CO2RR but also accentuates the prospective developments in the design of sophisticated catalytic materials.

Near-Unity Photothermal CO2 Hydrogenation to Methanol Based on a Molecule/Nanocarbon Hybrid Catalyst

Solar-driven CO2-to-methanol conversion provides an intriguing route for both solar energy storage and CO2 mitigation. For scalable applications, near-unity methanol selectivity is highly desirable to reduce the energy and cost endowed by low-value byproducts and complex separation processes, but so far has not been achieved. Here we demonstrate a molecule/nanocarbon hybrid catalyst composed of carbon nanotube-supported molecularly dispersed cobalt phthalocyanine (CoPc/CNT), which synergistically integrates high photothermal conversion capability for affording an optimal reaction temperature with homogeneous and intrinsically-efficient active sites, to achieve a catalytic activity of 2.4 mmol gcat -1 h-1 and selectivity of ~99 % in direct photothermal CO2 hydrogenation to methanol reaction. Both theoretical calculations and operando characterizations consistently confirm that the unique electronic structure of CoPc and appropriate reaction temperature cooperatively enable a thermodynamic favorable reaction pathway for highly selective methanol production. This work represents an important milestone towards the development of advanced photothermal catalysts for scalable and cost-effective CO2 hydrogenation.

Built-In Electric Field Boost Photocatalytic Degradation of Pollutants in Wastewater

The photocatalysis technique shows significant potential for wastewater degradation; however, the rapid recombination of photogenerated holes and electrons severely limits its photocatalytic efficiency. This situation necessitates the development of effective strategies to tackle these challenges. One well-documented approach is built-in electric field engineering in heterojunctions or composites, which has been shown to enhance electron transfer and thereby reduce the recombination of electrons and holes. This strategy has proven highly effective in significantly improving photocatalytic activity for the degradation of pollutants in wastewater. In this context, we summarize recent advancements in built-in electric field engineering in photocatalysts, highlighting the fundamentals and modifications of this approach, as well as its positive impact on photocatalytic performance in the degradation of wastewater pollutants.

Synthesis of Double Trivalent Perovskite Quantum Dots Cs3BiSbX9 (X = Cl, Br, I) for Efficient CO2 Photoreduction Performance

Non-toxic Bi halides have great potential in the field of CO2 photoreduction, but strong charge localization limits their charge separation and transfer. In this study, a series of Cs3BiSbX9 (X = Cl, Br, I) perovskite quantum dots (PQDs) are synthesized by antisolvent recrystallization at room temperature, in which Cs3BiSbBr9 PQDs has high selectivity (94.51%) and yield (15.32 µmol g-1 h-1) of CO2 to CO. In situ DRIFTS and theoretical calculations suggest that the surface charge can be tailored by halogen modulation, allowing for the customization of intermediate species. The Bi─Br─Sb symmetric charge distribution induced by the halogen Br promotes the formation of b─HCOO and reduces the reaction energy barrier of the rate-limiting step, while the weak electronegativity of Cl and the high electronegativity of I leads to m─HCOO and ─COOH production, which are detrimental to CO generation. This work provides new insights into the design of halide alloy perovskites for CO2 photoreduction.

An All-In-One Integrating Strategy for Designing Platinum(II)-Based Supramolecular Polymers for Photocatalytic Hydrogen Evolution

Organic polymer photocatalysts have achieved significant progress in photocatalytic hydrogen evolution, while developing the integrated organic polymers possessing the functions of photosensitizer, electron transfer mediator, and catalyst simultaneously is urgently needed and presents a great challenge. Considering that chalcogenoviologens are able to act as photosensitizers and electron-transfer mediators, a series of chalcogenoviologen-containing platinum(II)-based supramolecular polymers is designed, which exhibited strong visible light-absorbing ability and suitable bandgap for highly efficient photocatalytic hydrogen evolution without the use of a cocatalyst. The hydrogen evolution rate (HER) increases steadily with the decrease in an optical gap of the polymer. Among these "all-in-one" polymers, Se-containing 2D porous polymer exhibited the best photocatalytic performance with a HER of 3.09 mmol g-1 h-1 under visible light (>420 nm) irradiation. Experimental and theoretical calculations reveal that the distinct intramolecular charge transfer characteristics and heteroatom N in terpyridine unit promote charge separation and transfer within the molecules. This work could provide new insights into the design of metallo-supramolecular polymers with finely tuned components for photocatalytic hydrogen evolution from water.

Anion Modulation of Ag-Imidazole Cuboctahedral Cage Microenvironments for Efficient Electrocatalytic CO2 Reduction

How to achieve CO2 electroreduction in high efficiency is a current challenge with the mechanism not well understood yet. The metal-organic cages with multiple metal sites, tunable active centers, and well-defined microenvironments may provide a promising catalyst model. Here, we report self-assembly of Ag4L4 type cuboctahedral cages from coordination dynamic Ag+ ion and triangular imidazolyl ligand 1,3,5-tris(1-benzylbenzimidazol-2-yl) benzene (Ag-MOC-X, X=NO3, ClO4, BF4) via anion template effect. Notably, Ag-MOC-NO3 achieves the highest CO faradaic efficiency in pH-universal electrolytes of 86.1 % (acidic), 94.1 % (neutral) and 95.3 % (alkaline), much higher than those of Ag-MOC-ClO4 and Ag-MOC-BF4 with just different counter anions. In situ attenuated total reflection Fourier transform infrared spectroscopy observes formation of vital intermediate *COOH for CO2-to-CO conversion. The density functional theory calculations suggest that the adsorption of CO2 on unsaturated Ag-site is stabilized by C-H⋅⋅⋅O hydrogen-bonding of CO2 in a microenvironment surrounded by three benzimidazole rings, and the activation of CO2 is dependent on the coordination dynamics of Ag-centers modulated by the hosted anions through Ag⋅⋅⋅X interactions. This work offers a supramolecular electrocatalytic strategy based on Ag-coordination geometry and host-guest interaction regulation of MOCs as high-efficient electrocatalysts for CO2 reduction to CO which is a key intermediate in chemical industry process.

Efficient reduction of CO2 and inhibition of hydrogen precipitation by polyoxometalate photocatalyst modified with the metal Mn

Photocatalytic reduction of CO2 to chemical fuels is attractive for solving both the greenhouse effect and the energy crisis, but the key challenge is to design and synthesize photocatalysts with remarkable performance under visible light irradiation. Efficient catalytic carbon dioxide reduction (CO2RR) with light is considered a promising sustainable and clean approach to solve environmental problems. Herein, we found a new photocatalyst ([Mn(en)2]6[V12B18O54(OH)6]) (abbreviated as Mn6V12) based on the modifiability of polyoxometalates, in which Mn acts as a modifying unit to efficiently reduce CO2 to CO and effectively inhibit the hydrogen precipitation reaction. This Mn modified polyoxometalate catalyst has a maximum CO generation rate of 4625.0 μmol g-1 h-1 and a maximum H2 generation rate of 499.6 μmol g-1 h-1, with a selectivity of 90.3% for CO generation and 9.7% for H2 generation. This polyoxometalate photocatalyst can effectively reduce CO and inhibit the hydrogen precipitation reaction. It provides a new idea for the efficient photocatalytic carbon dioxide reduction (CO2RR) with polyoxometalate catalysts.

In situ single iron atom doping on Bi2WO6 monolayers triggers efficient photo-fenton reaction

Developing an efficient photocatalytic system for hydrogen peroxide (H2O2) activation in Fenton-like processes holds significant promise for advancing water purification technologies. However, challenges such as high carrier recombination rates, limited active sites, and suboptimal H2O2 activation efficiency impede optimal performance. Here we show that single-iron-atom dispersed Bi2WO6 monolayers (SIAD-BWOM), designed through a facile hydrothermal approach, can offer abundant active sites for H2O2 activation. The SIAD-BWOM catalyst demonstrates superior photo-Fenton degradation capabilities, particularly for the persistent pesticide dinotefuran (DNF), showcasing its potential in addressing recalcitrant organic pollutants. We reveal that the incorporation of iron atoms in place of tungsten within the electron-rich [WO4]2- layers significantly facilitates electron transfer processes and boosts the Fe(II)/Fe(III) cycle efficiency. Complementary experimental investigations and theoretical analyses further elucidate how the atomically dispersed iron induces lattice strain in the Bi2WO6 monolayer, thereby modulating the d-band center of iron to improve H2O2 adsorption and activation. Our research provides a practical framework for developing advanced photo-Fenton catalysts, which can be used to treat emerging and refractory organic pollutants more effectively.

π-Sticked Metal‒Organic Monolayers for Single-Metal-Site Dependent CO2 Photoreduction and Hydrogen Evolution Reaction

Hierarchical self-assembly of 2D metal‒organic layers (MOLs) for the construction of advanced functional materials have witnessed considerable interest, due to the increasing atomic utilizations and well-defined atom‒property relationship. However, the construction of atomically precise MOLs with mono-/few-layered thickness through hierarchical self-assembly process remains a challenge, mostly because the elaborate long-range order is difficult to control via conventional noncovalent interaction. Herein, a quadruple π-sticked metal‒organic layer (πMOL) is reported with checkerboard-like lattice in ≈1.0 nanometre thickness, on which the catalytic selectivity can be manipulated for highly efficient CO2 reduction reaction (CO2RR) and hydrogen evolution reaction (HER) over a single metal site. In saturated CO2 aqueous acetonitrile, Fe-πMOL achieves a highly effective CO2RR with the yield of ≈3.98 mmol g‒1 h‒1 and 91.7% selectivity. In contrast, the isostructural Co-πMOL as well as mixed metallic FeCo-πMOL exhibits a high activity toward HER under similar conditions. DFT calculations reveal that single metal site exhibits the significant difference in CO2 adsorption energy and activation barrier, which triggers highly selective CO2RR for Fe site and HER for Co site, respectively. This work highlights the potential of supramolecular π…π interaction for constructing monolayer MOL materials to uniformly distribute the single metal sites for artificial photosynthesis.

Ligand-mediated exciton dissociation and interparticle energy transfer on CsPbBr3 perovskite quantum dots for efficient CO2-to-CO photoreduction

Perovskite quantum dots (PQDs) hold immense potential as photocatalysts for CO2 reduction due to their remarkable quantum properties, which facilitates the generation of multiple excitons, providing the necessary high-energy electrons for CO2 photoreduction. However, harnessing multi-excitons in PQDs for superior photocatalysis remains challenging, as achieving the concurrent dissociation of excitons and interparticle energy transfer proves elusive. This study introduces a ligand density-controlled strategy to enhance both exciton dissociation and interparticle energy transfer in CsPbBr3 PQDs. Optimized CsPbBr3 PQDs with the regulated ligand density exhibit efficient photocatalytic conversion of CO2 to CO, achieving a 2.26-fold improvement over unoptimized counterparts while maintaining chemical integrity. Multiple analytical techniques, including Kelvin probe force microscopy, temperature-dependent photoluminescence, femtosecond transient absorption spectroscopy, and density functional theory calculations, collectively affirm that the proper ligand termination promotes the charge separation and the interparticle transfer through ligand-mediated interfacial electron coupling and electronic interactions. This work reveals ligand density-dependent variations in the gas-solid photocatalytic CO2 reduction performance of CsPbBr3 PQDs, underscoring the importance of ligand engineering for enhancing quantum dot photocatalysis.

Efficient Photoreduction of CO2 to CO with 100% Selectivity by Slowing Down Electron Transport

It remains challenging to obtain a single product in the gas-solid photocatalytic reduction of CO2 because CO and CH4 are usually produced simultaneously. This study presents the design of the I-type nested heterojunction TiO2/BiVO4 with controllable electron transport by modulating the TiO2 component. This study demonstrates that slowing electron transport could enable TiO2/BiVO4-4 to generate CO with 100% selectivity. In addition, modifying TiO2/BiVO4-4 by loading a Cu single atom further increased the CO product yield by 3.83 times (17.33 μmol·gcat-1·h-1), while maintaining 100% selectivity for CO. Characterization and density functional theory (DFT) calculations revealed that the selectivity was mainly determined by the electron transport of the support, whereas CO2 was efficiently adsorbed and activated by the Cu single atom. Such a two-step regulation strategy of combining heterojunction with single atom enhances the possibility of simultaneously obtaining high selectivity and high yield in the photocatalytic reduction of CO2.

Electron Localization-Triggered Proton Pumping Toward Cu Single Atoms for Electrochemical CO2 Methanation of Unprecedented Selectivity

Slow multi-proton coupled electron transfer kinetics and unexpected desorption of intermediates severely hinder the selectivity of CO2 methanation. In this work, a one-stone-two-bird strategy of pumping protons and improving adsorption configuration/capability enabled by electron localization is developed to be highly efficient for CH4 electrosynthesis over Cu single atoms anchored on bismuth vacancies of BiVO4 (Bi1-xVO4─Cu), with superior kinetic isotope effect and high CH4 Faraday efficiency (92%), far outperforming state-of-the-art electrocatalysts for CO2 methanation. Control experiments and theoretical calculations reveal that the bismuth vacancies (VBi) not only act as active sites for H2O dissociation but also induce electron transfer toward Cu single-atom sites. The VBi-induced electron localization pumps *H from VBi sites to Cu single atoms, significantly promoting the generation and stabilization of the pivotal intermediate (*CHO) for highly selective CH4 electrosynthesis. The metal vacancies as new initiators show enormous potential in the proton transfer-involved hydrogenative conversion processes.

Integrated Anionic Zirconium-Organic Cage and Cationic Boron-Imidazolate Cage for Synergetic Optical Limiting

Making oppositely charged metal-organic cages (MOCs) into a tightly ordered structure may bring interesting functions. Herein, we report a novel structure composed of anionic (Zr4 L6 )8- (L=embonate) tetrahedral cages and in situ-formed cationic [Zn4 (Bim)4 ]4+ (Bim=[BH(im)3 ]- ; im=imidazole) cubic cages. Chiral transfer is observed from enantiopure (Zr4 L6 )8- cage to enantiopure [Zn4 (Bim)4 ]4+ cage. A pair of enantiomers (PTC-373(Δ) and PTC-373(Λ)) are formed. PTC-373 exhibits high chemical and thermal stabilities, affording an interesting single-crystal-to-single-crystal transformation. More importantly, the combination of ionic pair cages significantly enhances its third-order nonlinear optical property, and its thin-film exhibits an excellent optical limiting effect.

Stabilizing electron-rich Ni single-atoms on black phosphorus nanosheets boosts photocatalytic carbon dioxide reduction

The development of unique single-atom catalysts with electron-rich feature is essential to promoting the photocatalytic CO2 reduction, yet remains a big challenge. Here, a conceptionally new single-atom catalyst constructed from atomically dispersed Ni-P3 species on black phosphorus (BP) nanosheets (BP-Ni) is synthesized for realizing highly efficient visible-light-driven CO2 reduction when trapping photogenerated electrons from homogeneous light absorbers in the presence of triethanolamine as the sacrificial agent. Both the experimental and theoretical calculation data reveal that the Ni-P3 species on BP nanosheets own the electron-rich feature that can improve the photogenerated charge separation efficiency and lower the activation barrier of CO2 conversion. This unique feature makes BP-Ni exhibit the much higher activity as cocatalyst in the photocatalytic CO2 reduction than BP nanosheets. The BP-Ni can also be applied as a cocatalyst for enhanced photocatalytic CO2 reduction after combining with CdSe/S colloidal crystal photocatalyst. The present study offers valuable inspirations for the design and construction of effective catalytic sites toward photocatalytic CO2 reduction reactions.

Spatial Heterogeneity and Strong Coupling of FeII /FeIII in an Individual Metal-Organic Framework Nanoparticle for Efficient CO2 Photoreduction

The synthesis and characterization of an FeII /FeIII metal-organic framework (MOF) nanocrystal with spatial heterogeneity that arises from the non-uniform distribution of different valence states is disclosed. The FeII /FeIII -Ni Prussian blue analog (PBA) delivers superior photocatalytic performance in the selective CO2 reduction reaction thanks to the strong FeII /FeIII coupling, with CO yield up to 12.27 mmol g-1 h-1 and 90.6% selectivity under visible-light irradiation. Density functional theory calculation and experimental studies prove that the spatial heterogeneity of FeII /FeIII in the individual MOF nanocrystal not only directs and expedites the charge transfer within a catalyst particle but also creates the heterogeneity of catalytically-active Ni sites for efficient CO2 photoreduction. The current findings add to a growing literature of materials with compositional heterogeneity and provide a reference for future research.

Molecular Co-Catalyst Confined within a Metallacage for Enhanced Photocatalytic CO2 Reduction

The construction of structurally well-defined supramolecular hosts to accommodate catalytically active species within a cavity is a promising way to address catalyst deactivation. The resulting supramolecular catalysts can significantly improve the utilization of catalytic sites, thereby achieving a highly efficient chemical conversion. In this study, the Co-metalated phthalocyanine (Pc-Co) was successfully confined within a tetragonal prismatic metallacage, leading to the formation of a distinctive type of supramolecular photocatalyst (Pc-Co@Cage). The host-guest architecture of Pc-Co@Cage was unambiguously elucidated by single-crystal X-ray diffraction (SCXRD), NMR, and ESI-TOF-MS, revealing that the single cobalt active site can be thoroughly isolated within the space-restricted microenvironment. In addition, we found that Pc-Co@Cage can serve as a homogeneous supramolecular photocatalyst that displays high CO2 to CO conversion in aqueous media under visible light irradiation. This supramolecular photocatalyst exhibits an obvious improvement in activity (TONCO = 4175) and selectivity (SelCO = 92%) relative to the nonconfined Pc-Co catalyst (TONCO = 500, SelCO = 54%). The present strategy provided a rare example for the construction of a highly active, selective, and stable photocatalyst for CO2 reduction through a cavity-confined molecular catalyst within a discrete metallacage.

Minimizing CO2 emissions by photocatalytic CO2 reduction to CH3OH over Li2MnO3/WO3 heterostructures under visible illumination

Photocatalytic CO2 reduction to valuable fuels has proved to be a favourable process to produce renewable energy and reduce CO2 emissions, which mostly depends on designing effective photocatalysts with the rapid separation rate of charge carriers. In this contribution, mesoporous n-n heterojunction Li2MnO3/WO3 nanocomposites were designed via a simplistic sol-gel process for CO2 reduction utilizing visible illumination (λ > 420 nm). XRD and TEM measurements confirmed the synthesized Li2MnO3/WO3 nanocomposite is a monoclinic structure, and its particle size is 25 ± 5 nm. The obtained Li2MnO3/WO3 exhibited narrower bandgap energy (1.74 eV), larger surface area (212 m2g-1), exceedingly visible absorbing, and lower recombination of electron and hole. The yield of CH3OH was determined about 198, 871, 1140, 1550 and 1570 mmolg-1 for bare WO3 and 5%, 10%, 15% and 20% Li2MnO3/WO3 nanocomposites, respectively. These results evidenced that the 15% Li2MnO3/WO3 photocatalyst exhibited the best reduction ability compared to other nanocomposites. The CO2 reduction over 15% Li2MnO3/WO3 photocatalyst achieved a maximal CO2 conversion with the substantially boosted CH3OH, i.e., 1550 mmolg-1 after 9 h, which was enhanced 7.8 folds great than of WO3 NPs. Mesoporous Li2MnO3/WO3 nanocomposites, in comparison with bare WO3 NPs, created more active sites for facilitating CO2 and had a specific electric field to more effectively separate charge carriers. The Li2MnO3/WO3 photocatalyst has superior photostability during the continuous reduction of CO2 for 45 h with no remarkable decrease. The possible direct S-scheme mechanism for electron transfer over Li2MnO3/WO3 photocatalyst with the enhanced CO2 reduction ability was discussed. The present work demonstrates an avenue for building highly effective heterostructure photocatalysts in solar-energy-induced potential applications.

Two new 3D Supramolecular Frameworks as Photocatalysts for Degradation of Methyl Blue

We successfully synthesized two new supramolecular frameworks, namely {[Cu2(L1)(H2O)2]·(H2O)}n (1) and {[Ag(L2)(bpp)]2n·2(H2O)}n (2) (H2L1 = 2-hydroxy-5-sulfobenzoic acid, HL2 = 8-hydroxyquinoline-2-sulfonic acid) under hydrothermal condition. These single-crystal structures were determined via X-ray single crystal diffraction analyses. Solids 1 and 2 acted as photocatalysts and performed good photocatalytic activities for MB degradation under UV light irradiation.

Multilevel-Regulated Metal-Organic Framework Platform Integrating Pore Space Partition and Open-Metal Sites for Enhanced CO2 Photoreduction to CO with Nearly 100% Selectivity

Rational design and regulation of atomically precise photocatalysts are essential for constructing efficient photocatalytic systems tunable at both the atomic and molecular levels. Herein, we propose a platform-based strategy capable of integrating both pore space partition (PSP) and open-metal sites (OMSs) as foundational features for constructing high-performance photocatalysts. We demonstrate the first structural prototype obtained from this strategy: pore-partitioned NiTCPE-pstp (TCPE = 1,1,2,2-tetra(4-carboxylphenyl)ethylene, pstp = partitioned stp topology). Nonpartitioned NiTCPE-stp is constructed from six-connected [Ni3(μ3-OH)(COO)6] trimer and TCPE linker to form 1D hexagonal channels with six coplanar OMSs directed at channel centers. After introducing triangular pore-partitioning ligands, half of the OMSs were retained, while the other half were used for PSP, leading to unprecedented microenvironment regulation of the pore structure. The resulting material integrates multiple advanced properties, including robustness, wider absorption range, enhanced electronic conductivity, and high CO2 adsorption, all of which are highly desirable for photocatalytic applications. Remarkably, NiTCPE-pstp exhibits excellent CO2 photoreduction activity with a high CO generation rate of 3353.6 μmol g-1 h-1 and nearly 100% selectivity. Theoretical and experimental studies show that the introduction of partitioning ligands not only optimizes the electronic structure to promote the separation and transfer of photogenerated carriers but also reduces the energy barrier for the formation of *COOH intermediates while promoting CO2 activation and CO desorption. This work is believed to be the first example to integrate PSP strategies and OMSs within metal-organic framework (MOF) photocatalysts, which provides new insight as well as new structural prototype for the design and performance optimization of MOF-based photocatalysts.

Atomically accurate site-specific ligand tailoring of highly acid- and alkali-resistant Ti(iv)-based metallamacrocycle for enhanced CO2 photoreduction

Skillfully engineering surface ligands at specific sites within robust clusters presents both a formidable challenge and a captivating opportunity. Herein we unveil an unprecedented titanium-oxo cluster: a calix[8]arene-stabilized metallamacrocycle (Ti16L4), uniquely crafted through the fusion of four "core-shell" {Ti4@(TBC[8])(L)} subunits with four oxalate moieties. Notably, this cluster showcases an exceptional level of chemical stability, retaining its crystalline integrity even when immersed in highly concentrated acid (1 M HNO3) and alkali (20 M NaOH). The macrocycle's surface unveils four specific, customizable μ2-bridging sites, primed to accommodate diverse carboxylate ligands. This adaptability is highlighted through deliberate modifications achieved by alternating crystal soaking in alkali and carboxylic acid solutions. Furthermore, Ti16L4 macrocycles autonomously self-assemble into one-dimensional nanotubes, which subsequently organize into three distinct solid phases, contingent upon the specific nature of the four μ2-bridging ligands. Notably, the Ti16L4 exhibit a remarkable capacity for photocatalytic activity in selectively reducing CO2 to CO. Exploiting the macrocycle's modifiable shell yields a significant boost in performance, achieving an exceptional maximum CO release rate of 4.047 ± 0.243 mmol g-1 h-1. This study serves as a striking testament to the latent potential of precision-guided surface ligand manipulation within robust clusters, while also underpinning a platform for producing microporous materials endowed with a myriad of surface functionalities.

Enhanced photocatalytic activity and mechanism insight of copper-modulated lead-free Cs2AgSbCl6 double perovskite microcrystals

Lead halide perovskites are prospective candidates for CO₂ photoconversion. Herein, we report copper-doped lead-free Cs₂AgSbCl₆ double perovskite microcrystals (MCs) for gas-solid phase photocatalytic CO₂ reduction. The 0.2Cu@Cs₂AgSbCl₆ double perovskite MCs display unprecedented CO₂ photoreduction capability with CO and CH₄ yields of 412 and 128 μmol g^-1, respectively. The ultrafast transient absorption spectroscopy reveals the enhanced separation of photoexcited carriers in copper-doped Cs₂AgSbCl₆ MCs. The active sites and reaction intermediates on the surface of the doped Cs₂AgSbCl₆ are dynamically monitored and precisely unraveled based on the in-situ Fourier transform infrared spectroscopy investigation. In combination with density functional theory calculations, it is revealed that the copper-doped Cs₂AgSbCl₆ MCs facilitate sturdy CO₂ adsorption and activation and strikingly enhance the photocatalytic performance. This work offers an in-depth interpretation of the photocatalytic mechanism of Cs₂AgSbCl₆ doped with copper, which may provide guidance for future design of high-performance photocatalysts for solar fuel production.

Guest-Induced Multilevel Charge Transport Strategy for Developing Metal-Organic Frameworks to Boost Photocatalytic CO2 Reduction

Encapsulating photogenerated charge-hopping nodes and space transport bridges within metal-organic frameworks (MOFs) is a promising method of boosting the photocatalytic performance. Herein, this work embeds electron transfer media (9,10-bis(4-pyridyl)anthracene (BPAN)) in MOF cavities to build multi-level electron transfer paths. The MOF cavities are accurately regulated to investigate the significance of the multi-level electron transfer paths in the process of CO2 photoreduction by evaluating the difference in the number of guest media. The prepared MOFs, {[Co(BPAN)(1,4-dicarboxybenzene)(H2 O)2 ]·BPAN·2H2 O} and {[Co(BPAN)2 (4,4'-biphenyldicarboxylic acid)2 (H2 O)2 ]·2BPAN·2H2 O} (denoted as BPAN-Co-1 and BPAN-Co-2), exhibit efficient visible-light-driven CO2 conversion properties. The CO photoreduction efficacy of BPAN-Co-2 (5598 µmol g-1  h-1 ) is superior to that of most reported MOF-based catalysts. In addition, the enhanced CO2 photoreduction ability is supported by density functional theory (DFT). This work illustrates the feasibility of realizing charge separation characteristics in MOF catalysts at the molecular level, and provides new insight for designing high-performance MOFs for artificial photosynthesis.

Advanced BIFs with Co, B, N, and S for Electrocatalytic Oxygen Reduction and Oxygen Evolution Reactions

In this work, a new alkaline-stable boron imidazolate framework (BIF-90) was rationally designed and successfully synthesized by solvothermal reaction. Due to its potential electrocatalytic active sites (Co, B, N, and S) and chemical stabilities, BIF-90 was explored as a bifunctional electrocatalyst toward electrochemical oxygen reactions, namely, oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). This work will open new avenues toward the design of stable, cheap, and more active BIFs as bifunctional catalysts.

Postsynthetic Annulation of Three-Dimensional Covalent Organic Frameworks for Boosting CO2 Photoreduction

Three-dimensional covalent organic frameworks (3D COFs), with interconnected pores and exposed functional groups, provide new opportunities for the design of advanced functional materials through postsynthetic modification. Herein, we demonstrate the successful postsynthetic annulation of 3D COFs to construct efficient CO₂ reduction photocatalysts. Two 3D COFs, NJU-318 and NJU-319Fe, were initially constructed by connecting hexaphenyl-triphenylene units with pyrene- or Fe-porphyrin-based linkers. Subsequently, the hexaphenyl-triphenylene moieties within the COFs were postsynthetically transformed into π-conjugated hexabenzo-trinaphthylene (pNJU-318 and pNJU-319Fe) to enhance visible light absorption and CO₂ photoreduction activity. The optimized photocatalyst, pNJU-319Fe, shows a CO yield of 688 μmol g^-1, representing a 2.5-fold increase compared to that of unmodified NJU-319Fe. Notably, the direct synthesis of hexabenzo-trinaphthylene-based COF catalysts was unsuccessful due to the low solubility of conjugated linkers. This study not only provides an effective method to construct photocatalysts but also highlights the unlimited tunability of 3D COFs through structural design and postsynthetic modification.

In Situ Growth of Lead-Free Cs2CuBr4 Perovskite Quantum Dots in KIT-6 Mesoporous Molecular Sieve for CO2 Adsorption, Activation, and Reduction

Metal halide perovskites (MHPs) are emerging as promising candidates for photocatalytic CO₂ conversion. However, their practical application is still restricted by the poor intrinsic stability and weak adsorption/activation toward CO₂ molecules. The rational design of MHPs-based heterostructures with high stability and abundant active sites is a potential solution to this obstacle. Herein, we report the in situ growth of lead-free Cs₂CuBr₄ perovskite quantum dots (PQDs) in KIT-6 mesoporous molecular sieve, obtaining remarkable photocatalytic CO₂ reduction activity and durable stability. The optimized Cs₂CuBr₄@KIT-6 heterostructure exhibits the photocatalytic CO and CH₄ evolution rates of 51.6 and 17.2 μmol g^-1 h^-1, respectively, far exceeding those of pristine Cs₂CuBr₄. On the basis of in situ diffuse reflectance infrared Fourier transform spectra and theoretical investigations, the detailed CO₂ photoreduction pathway is systematically revealed. This work provides a new route for the rational construction of perovskite-based heterostructures with strong CO₂ adsorption/activation and good stability for photocatalytic CO₂ reduction.

Recent Advances in Phase-Engineered Photocatalysts: Classification and Diversified Applications

Phase engineering is an emerging strategy for tuning the electronic states and catalytic functions of nanomaterials. Great interest has recently been captured by phase-engineered photocatalysts, including the unconventional phase, amorphous phase, and heterophase. Phase engineering of photocatalytic materials (including semiconductors and cocatalysts) can effectively affect the light absorption range, charge separation efficiency, or surface redox reactivity, resulting in different catalytic behavior. The applications for phase-engineered photocatalysts are widely reported, for example, hydrogen evolution, oxygen evolution, CO₂ reduction, and organic pollutant removal. This review will firstly provide a critical insight into the classification of phase engineering for photocatalysis. Then, the state-of-the-art development of phase engineering toward photocatalytic reactions will be presented, focusing on the synthesis and characterization methodologies for unique phase structure and the correlation between phase structure and photocatalytic performance. Finally, personal understanding of the current opportunities and challenges of phase engineering for photocatalysis will also be provided.

Molecular Catalysis of Energy Relevance in Metal-Organic Frameworks: From Higher Coordination Sphere to System Effects

The modularity and synthetic flexibility of metal-organic frameworks (MOFs) have provoked analogies with enzymes, and even the term MOFzymes has been coined. In this review, we focus on molecular catalysis of energy relevance in MOFs, more specifically water oxidation, oxygen and carbon dioxide reduction, as well as hydrogen evolution in context of the MOF-enzyme analogy. Similar to enzymes, catalyst encapsulation in MOFs leads to structural stabilization under turnover conditions, while catalyst motifs that are synthetically out of reach in a homogeneous solution phase may be attainable as secondary building units in MOFs. Exploring the unique synthetic possibilities in MOFs, specific groups in the second and third coordination sphere around the catalytic active site have been incorporated to facilitate catalysis. A key difference between enzymes and MOFs is the fact that active site concentrations in the latter are often considerably higher, leading to charge and mass transport limitations in MOFs that are more severe than those in enzymes. High catalyst concentrations also put a limit on the distance between catalysts, and thus the available space for higher coordination sphere engineering. As transport is important for MOF-borne catalysis, a system perspective is chosen to highlight concepts that address the issue. A detailed section on transport and light-driven reactivity sets the stage for a concise review of the currently available literature on utilizing principles from Nature and system design for the preparation of catalytic MOF-based materials.

Iron-Complex-Based Supramolecular Framework Catalyst for Visible-Light-Driven CO2 Reduction

Molecule-based heterogeneous photocatalysts without noble metals are one of the most attractive systems for visible-light-driven CO₂ reduction. However, reports on this class of photocatalysts are still limited, and their activities are quite low compared to those containing noble metals. Herein, we report an iron-complex-based heterogeneous photocatalyst for CO₂ reduction with high activity. The key to our success is the use of a supramolecular framework composed of iron porphyrin complexes bearing pyrene moieties at meso positions. The catalyst exhibited high activity for CO₂ reduction under visible-light irradiation (29100 μmol g^-1 h^-1 for CO production, selectivity 99.9%), which is the highest among relevant systems. The performance of this catalyst is also excellent in terms of apparent quantum yield for CO production (0.298% at 400 nm) and stability (up to 96 h). This study provides a facile strategy to create a highly active, selective, and stable photocatalyst for CO₂ reduction without utilizing noble metals.

Surface Ru-H Bipyridine Complexes-Grafted TiO2 Nanohybrids for Efficient Photocatalytic CO2 Methanation

A series of novel surface Ru-H bipyridine complexes-grafted TiO₂ nanohybrids were for the first time prepared by a combined procedure of surface organometallic chemistry with post-synthetic ligand exchange for photocatalytic conversion of CO₂ to CH₄ with H₂ as electron and proton donors under visible light irradiation. The selectivity toward CH₄ increased to 93.4% by the ligand exchange of 4,4'-dimethyl-2,2'-bipyridine (4,4'-bpy) with the surface cyclopentadienyl (Cp)-RuH complex and the CO₂ methanation activity was enhanced by 4.4-fold. An impressive rate of 241.2 μL·g^-1·h^-1 for CH₄ production was achieved over the optimal photocatalyst. The femtosecond transient IR absorption results demonstrated that the hot electrons were fast injected in 0.9 ps from the photoexcited surface 4,4'-bpy-RuH complex into the conduction band of TiO₂ nanoparticles to form a charge-separated state with an average lifetime of ca. 50.0 ns responsible for the CO₂ methanation. The spectral characterizations indicated clearly that the formation of CO₂^•- radicals by single electron reduction of CO₂ molecules adsorbed on surface oxygen vacancies of TiO₂ nanoparticles was the most critical step for the methanation. Such radical intermediates were inserted into the explored Ru-H bond to generate Ru-OOCH species and finally CH₄ and H₂O in the presence of H₂.

CO2 Photoactivation Study of Adenine Nucleobase: Role of Hydrogen-Bonding Traction

The discovery and in-depth study of non-biocatalytic applications of active biomolecules are essential for the development of biomimicry. Here, the effect of intermolecular hydrogen-bonding traction on the CO₂ photoactivation performance of adenine nucleobase by means of an adenine-containing model system (AMOF-1-4) is uncovered. Remarkably, the hydrogen-bonding schemes around adenines are regularly altered with the increase in the alkyl (methyl, ethyl, isopropyl, and tert-butyl) electron-donating capacity of the coordinated aliphatic carboxylic acids, and thus, lead to a stepwise improvement in CO₂ photoreduction activity. Density functional theory calculations demonstrate that strong intermolecular hydrogen-bonding traction surrounding adenine can obviously increase the adenine-CO₂ interaction energy and, therefore, result in a smoother CO₂ activation process. Significantly, this work also provides new inspiration for expanding the application of adenine to more small-molecule catalytic reactions.

Photocatalytic CO2 -to-Syngas Evolution with Molecular Catalyst Metal-Organic Framework Nanozymes

Syngas, a mixture of CO and H₂ , is a high-priority intermediate for producing several commodity chemicals, e.g., ammonia, methanol, and synthetic hydrocarbon fuels. Accordingly, parallel sunlight-driven catalytic conversion of CO₂ and protons to syngas is a key step toward a sustainable energy cycle. State-of-the-art catalytic systems and materials often fall short as application-oriented concurrent CO and H₂ evolution requires challenging reaction conditions which can hamper stability, selectivity, and efficiency. Here a light-harvesting metal-organic framework hosting two molecular catalysts is engineered to yield colloidal, water-stable, versatile nanoreactors for photocatalytic syngas generation with highly controllable product ratios. In-depth fluorescence, X-ray, and microscopic studies paired with kinetic analysis show that the host delivers energy efficiently to active sites, conceptually yielding nanozymes. This unlocked sustained CO₂ reduction and H₂ evolution with benchmark turnover numbers and record incident photon conversions up to 36%, showcasing a highly active and durable all-in-one material toward application in solar energy-driven syngas generation.

Rational Construction of Metal Organic Framework Hybrid Assemblies for Visible Light-Driven CO2 Conversion

Photocatalytic reduction of CO₂ to value-added chemicals is known to be a promising approach for CO₂ conversion. The design and preparation of ideal photocatalysts for CO₂ conversion are of pivotal significance for the sustainable development of the whole society. In this work, we integrated two functional organic linkers to prepare a novel metal organic framework (MOF) photocatalyst {[Co(9,10-bis(4-pyridyl)anthracene)_0.5(bpda)]·4DMF} (Co-MOF). The existence of anthryl and amino groups leads to a wide range of visible light absorption and efficient separation of photogenerated electrons. To extend the lifetime of photogenerated electrons in the photocatalytic system, we modified Co-MOF particles onto g-C₃N₄. As expected, Co-MOF/g-C₃N₄ composites exhibited an ultrahigh selectivity (more than 97%) in the photocatalytic process, and the highest CO production rate (1824 μmol/g/h) was 7.1 and 27.2 times of Co-MOFs and g-C₃N₄, respectively. What's more, we also discussed the reaction mechanism of the Co-MOF/g-C₃N₄ photocatalytic CO₂ reduction, and this work paves the pathway for designing photocatalysts with ideal CO₂ reduction performance.

Facet-Dependent Photocatalytic Behavior of Fe-soc-MOF for Carbon Dioxide Reduction

Exposing different facets on metal-organic frameworks (MOFs) is an efficient approach to regulate their photocatalytic performance for CO₂ reduction. Herein, Fe-soc-MOFs exposed with different facets were successfully synthesized, and the morphologies of Fe-soc-MOF exposed with eight {111} facets (Fe-soc-O) and that exposed with eight {111} and six {100} crystal facets (Fe-soc-M) are first reported. Fe-soc-MOFs have facet-dependent active sites on their surface and correspondingly different catalytic performance for photocatalytic CO₂ reduction. Fe-soc-O has the highest CO production of 1804 μmol g^-1 h^-1, while the Fe-soc-MOF exposed with six {100} facets (Fe-soc-C) has the best CO selectivity of 94.7%. Density functional theory (DFT) calculations demonstrate that the (111) facet has more favorable thermodynamic potential for CO₂ reduction and H₂ evolution compared with the (100) one, deriving from its facet-dependent active sites. This work shows that utilizing the facet-engineering strategy to regulate the active sites exposed on the surface of MOFs is feasible. The results display the relation between the facet of MOFs and the photocatalytic behavior for CO₂ reduction.

Fine-Tuning Tridentate Ligands for the Construction of Nanotube-Based Boron Imidazolate Frameworks with High Chemical Stability

Two unusual nanotube-based boron imidazolate frameworks (BIF-134 and BIF-135) were synthesized by a dual-ligand synthetic strategy under solvothermal conditions. In the structure of BIF-134 ([Co(BH(2-mim)₃)(BTC)_1/3](HBH(2-mim)₃)_1/3(NMA); 2-mim = 2-methylimidazole, NMA = N-methylacetamide, and BTC = 1,3,5-benzene tricarboxylate), one part of boron imidazolate ligands participate in the structural skeleton coordination, while another part of boron imidazolate ligands act as guest molecules that are located between adjacent nanotubes, which enhance the stability of the framework by the host-guest interaction and the pore space partition effects. It was found to be highly stable in air, water, organic solvents, and a wide pH range (pH 0-12). However, in the structure of BIF-135 ([Zn(BH(2-mim)₃)(CHTC)_1/3]; CHTC = 1,3,5-cyclohexanetricarboxylate), all boron imidazolate ligands participate in the structural skeleton coordination; there is no boron imidazolate guest molecule in the pores. The topology of BIF-135 is similar to that of BIF-134 by replacing BTC with CHTC and replacing Co with Zn. Furthermore, the obtained BIFs exhibited third-order nonlinear optical properties and potential optical limiting applications demonstrated by reverse saturable absorption.

Construction of a flower-like SnS2/SnO2 junction for efficient photocatalytic CO2 reduction

Photoreduction of CO2 to value-added chemicals and fuels is an attractive solution to alleviate environmental problems and energy crisis at the same time. However, engineering efficient photocatalysts with high activity and product selectivity is still challenging. Herein, we achieved three-dimensional (3D) spatial configuration design at micro-scale and heterogeneous interface construction at nano-scale on a SnS2/SnO2 composite, which featured hierarchical flower-like morphology consisted of nanosheets and type-II semiconductor structure. It behaved excellent selectivity and impressive photocatalytic CO2-to-CO performance with a yielding rate of 60.85 μmol g-1h-1, roughly 3 times higher than that of SnS2 and was in the front rank of this kind catalysts under 300 W Xe lamp illumination without using any sensitizers or noble metals. The enhanced catalytic capability could be attributed to the elaborately built structure with suitable energetic position that afforded effective separation and migration of photo-generated electron/hole pairs as well as enhanced light caption and absorption. Meanwhile, main reactive intermediates (e.g., CO2- and *COOH) were captured by in-situ Fourier transform infrared spectroscopy (FTIR), suggesting a fluent catalytic pathway on the SnS2/SnO2 platform. This work provides a new scheme to build advanced catalysts based on multiscale design and rational phase assembling.

The Progress of Metal-Organic Framework for Boosting CO2 Conversion

With the rapid development of modern society, environmental problems, including excessive amounts of CO2 released in the atmosphere, are becoming more and more serious. It is necessary to develop new materials and technologies to reduce pollution. Among them, metal–organic frameworks (MOFs) have shown potential for application in the area of catalysis due to their ultra-high specific surface area, structural versatility, and designability as well as ease of modification and post-synthesis. Herein, we summarize recent research advances by use of MOFs for boosting CO2 conversion. Furthermore, challenges and possible research directions related to further exploration are also discussed.

Nickel metal-organic frameworks for visible-light CO2 reduction under mild reaction conditions

Photochemical CO₂ conversion into carbon fuel is a promising route to explore renewable energy and relieve climate change. However, it is still a key challenge to achieve high selectivity to CO and simultaneously achieve high conversion efficiency in photochemical CO₂ reduction. Herein, we demonstrate the effect of Ni metal centers as catalytic active sites for the photocatalytic conversion of CO₂ to CO by designing and constructing Ni metal-organic framework (Ni-MOF) materials. In pure CO₂, Ni-MOF catalyst exhibits outstanding performance for visible-light-driven reductive CO₂ deoxygenation with a high CO evolution rate of 19.13 μmol h^-1 (per 1 mg of catalyst) and CO selectivity of 91.4%, which exceeds those of most reported systems. Upon using isostructural Co-MOF as the catalyst to replace Ni-MOF, a moderate performance towards CO₂ photoreduction and low CO selectivity (40.1%) were observed, implying that the performance of CO₂ photoreduction and CO selectivity are dependent on unsaturated metal centers.

Induction of Chirality in Boron Imidazolate Frameworks: The Structure-Directing Effects of Substituents

By enhancing steric hindrance of substituents on the imidazole ring, the fan-shaped molecule of a tridentate boron imidazolate ligand (KBH(2-ipim)₃, 2-ipim = 2-isopropylimidazolate) with racemic chirality was obtained. Then, seven novel boron imidazolate frameworks (BIFs) were prepared by mixing KBH(2-ipim)₃ ligands with various derivatives of benzene carboxylic acid under solvothermal conditions. All of these seven materials contain a ladder-like zinc-boron-imidazolate chain as a basic building block, and the ligand BH(2-ipim)₃^- exists in the same handedness in one chain. The structural variations are associated with the position of substituents of the auxiliary ligand. Of particular interest is the spontaneous resolution of BH(2-ipim)₃^- ligands into two independent enantiomorphous homochiral structures, BIF-131-S and BIF-131-R, which contain both a chiral chain and an absolute helix embedded in the nets.