Nanoreactor Confined and Enriched Intermediates for Electroreduction of CO2 to C2+ Products

In the process of electroreduction of carbon dioxide (eCO2RR) to multi-carbon (C2+) products, it is imperative to enhance the concentration of key intermediate species on the catalyst surface. The utilization of micro-nano reactors to achieve confinement effects has been widely observed in various catalytic reactions, yet it has seldom been employed in eCO2RR. Here, we present a novel nanoreactor composed of stacked CuS nanosheets for eCO2RR to C2+ products. In comparison to catalyst comprising of nanosheet with open space, the C-C coupling within this confined nanospace is significantly enhanced, resulting in the increase of Faraday efficiency (FE) of C2+ products to 53 %. In situ infrared (IR) spectroscopy reveals the confinement and enrichment of key intermediate by the nanoreactor. Our research findings demonstrate that a meticulously designed nanoreactor can elevate the selectivity of C2+ products, thereby aiding in the design of eCO2RR catalysts.

A Ru/RuO2 heterostructure boosting electrochemistry-assisted selective benzoic acid hydrogenation

Electrocatalytic hydrogenation of benzoic acid (BA) to cyclohexanecarboxylic acid (CCA) at ambient temperature and pressure has been recognized as a promising alternative to thermal hydrogenation since water is required as the hydrogen source. So far, only a few Pt-based electrocatalysts have been developed in acidic electrolyte. To overcome the limitations of reactant solubility and catalyst corrosion, herein, carbon fiber-supported Ru electrocatalysts with abundant Ru/RuO2 heterojunctions were fabricated via cyclic electrodeposition between -0.8 and 1.1 V vs. Ag/AgCl. In an alkaline environment, a Ru/RuO2 catalyst achieves an excellent ECH reactivity in terms of high BA conversion (100%) and selectivity towards CCA (100%) within 180 min at a current density of 200/3 mA cm-2, showing exceptional reusability and long-term stability. 1-Cyclohexenecarboxylic acid (CEA) was identified as the reaction intermediate, whose the selectivity is governed by the applied potential. Kinetic studies demonstrate that ECH of BA over Ru/RuO2 follows a Langmuir-Hinshelwood (L-H) mechanism. In situ Raman spectroscopy and theoretical calculations reveal that the Ru/RuO2 interface enhances the adsorption strength of CEA, thereby facilitating the production of fully hydrogenated CCA. This work provides a deep understanding of the ECH pathway of BA in alkaline media, and gives a new methodology to fabricate heterostructure electrocatalysts.

Boosting Low-Temperature CO2 Hydrogenation over Ni-based Catalysts by Tuning Strong Metal-Support Interactions

Rational design of low-cost and efficient transition-metal catalysts for low-temperature CO2 activation is significant and poses great challenges. Herein, a strategy via regulating the local electron density of active sites is developed to boost CO2 methanation that normally requires >350 °C for commercial Ni catalysts. An optimal Ni/ZrO2 catalyst affords an excellent low-temperature performance hitherto, with a CO2 conversion of 84.0 %, CH4 selectivity of 98.6 % even at 230 °C and GHSV of 12,000 mL g-1  h-1 for 106 h, reflecting one of the best CO2 methanation performance to date on Ni-based catalysts. Combined a series of in situ spectroscopic characterization studies reveal that re-constructing monoclinic-ZrO2 supported Ni species with abundant oxygen vacancies can facilitate CO2 activation, owing to the enhanced local electron density of Ni induced by the strong metal-support interactions. These findings might be of great aid for construction of robust catalysts with an enhanced performance for CO2 emission abatement and beyond.

Facile Hydrogenolysis of Sugars to 1,2-Glycols by Ru@PPh3/OPPh3 Confined Large-Pore Mesoporous Silica

Tandem hydrogenation vis-à-vis hydrogenolysis of xylose to 1,2-glycols remains a major challenge. Although one-pot conversion of xylose to 1,2-glycols requires stringent conditions, a sustainable approach would be quite noteworthy. We have developed a microwave route for the one-pot conversion of pentose (C5) and hexose (C6) sugars into glycol and hexitol, without pressurized hydrogen reactors. A pronounced hydrogenolysis of sugars to glycols is observed by Ru single atom (SA) on triphenylphosphine/phosphine oxide-modified silica (Ru@SiP), in contrast to Ru SA on pristine (Ru@SiC) and 3-aminopropyl-modified silica (Ru@SiN). A promising "ligand effect" was observed through phosphine modification of silica that presents a 70% overall yield of all reduced sugars (xylitol + glycols) from a 99% conversion of xylose with Ru@SiP. A theoretical study by DFT depicts an electronic effect on Ru-SA by triphenylphosphine that promotes the catalytic hydrogenolysis of sugars under mild conditions. Hence, this research represents an important step for glycols from biomass-derived sources.

Selective hydrogenation via precise hydrogen bond interactions on catalytic scaffolds

The active site environment in enzymes has been known to affect catalyst performance through weak interactions with a substrate, but precise synthetic control of enzyme inspired heterogeneous catalysts remains challenging. Here, we synthesize hyper-crosslinked porous polymer (HCPs) with solely -OH or -CH₃ groups on the polymer scaffold to tune the environment of active sites. Reaction rate measurements, spectroscopic techniques, along with DFT calculations show that HCP-OH catalysts enhance the hydrogenation rate of H-acceptor substrates containing carbonyl groups whereas hydrophobic HCP- CH₃ ones promote non-H bond substrate activation. The functional groups go beyond enhancing substrate adsorption to partially activate the C = O bond and tune the catalytic sites. They also expose selectivity control in the hydrogenation of multifunctional substrates through preferential substrate functional group adsorption. The proposed synthetic strategy opens a new class of porous polymers for selective catalysis.

Microenvironment engineering of supported metal nanoparticles for chemoselective hydrogenation

Selective hydrogenation with supported metal catalysts widely used in the production of fine chemicals and pharmaceuticals often faces a trade-off between activity and selectivity, mainly due to the inability to adjust one factor of the active sites without affecting other factors. In order to solve this bottleneck problem, the modulation of the microenvironment of active sites has attracted more and more attention, inspired by the collaborative catalytic mode of enzymes. In this perspective, we aim to summarize recent advances in the regulation of the microenvironment surrounding supported metal nanoparticles (NPs) using porous materials enriched with organic functional groups. Insights on how the microenvironment induces the enrichment, oriented adsorption and activation of substrates through non-covalent interaction and thus determines the hydrogenation activity and selectivity will be particularly discussed. Finally, a brief summary will be provided, and challenges together with a perspective in microenvironment engineering will be proposed.

Controlled synthesis of Ru-single-atoms on ordered mesoporous phosphine polymers for microwave-assisted conversion of biomass-derived sugars to artificial sweeteners

Atomically dispersed metal-single-atoms have become a frontier in solid catalysis due to their characteristic electronic properties. However, for biomass conversion, employing metal-single-atoms as catalysts is rather challenging since they suffer from poor selectivity and yield due to inadequate metal-support interactions. We show here that Ru/triphenylphosphine (PPh)-based ordered mesoporous polymers afford high yields of reduced sugars, xylitol (yield ∼95%) and sorbitol (yield ∼65%) in a microwave reactor with formic acid as the only hydrogen donor. We have established a unique relationship within Ru/triphenylphosphine that shows an important ligand effect, in contrast to, Ru/triphenylamine and Ru/catechol. The tailored electronic properties in Ru/phosphine were thoroughly examined by using state-of-the-art experimental techniques viz. EXAFS, XANES, XPS, DRIFTS and HAADF-STEM. The resulting phosphine-modified catalysts show a promotion in activity and selectivity towards less vulnerable aldehydes for hydrogenation, further confirmed by DFT calculations. This finding reveals a new protocol to tailor the activity of metal-single-atoms utilizing functional porous polymers as nanoreactors.

Multilevel Hollow Phenolic Resin Nanoreactors with Precise Metal Nanoparticles Spatial Location toward Promising Heterogeneous Hydrogenations

Hollow nanostructures with fascinating properties have inspired numerous interests in broad research fields. Cell-mimicking complex hollow architectures with precise active components distributions are particularly important, while their synthesis remains highly challenging. Herein, a "top-down" chemical surgery strategy is introduced to engrave the 3-aminophenol formaldehyde resin (APF) spheres at nanoscale. Undergoing the cleavage of (Ar)CN bonds with ethanol as chemical scissors and subsequent repolymerization process, the Solid APF transform to multilevel hollow architecture with precise nanospatial distribution of organic functional groups (e.g., hydroxymethyl and amine). The transformation is tracked by electron microscopy and solid-state nuclear magnetic resonance techniques, the category and dosage of alcohol are pivotal for constructing multilevel hollow structures. Moreover, it is demonstrated the evolution of nanostructures accompanied with unique organic microenvironments is able to accurately confine multiple gold (Au) nanoparticles, leading to the formation of pomegranate-like particles. Through selectively depositing palladium (Pd) nanoparticles onto the outer shell, bimetallic Au@APF@Pd catalysts are formed, which exhibit excellent hydrogenation performance with turnover frequency (TOF) value up to 11257 h^-1 . This work provides an effective method for precisely manipulating the nanostructure and composition of polymers at nanoscale and sheds light on the design of catalysts with precise spatial active components.

A biphosphine copolymer encapsulated single-site Rh catalyst for heterogeneous regioselective hydroaminomethylation of alkenes

A novel porous organic polymer catalyst with in situ encapsulated single-site Rh (Rh@CPOL-DPMphos&p-3vPPh₃) was developed and employed in heterogeneous hydroaminomethylation of alkenes, affording the corresponding amines in good to excellent regioselectivity and catalytic activity by a one-pot method. The combined actions of hierarchical pore confinement and the biphosphine ligand derived from the POP catalyst contributed to the improved regioselectivity.

Microenvironment Regulation of {Co4IIO4} Cubane for Syngas Photosynthesis

It is a great challenging task for selectivity control of both CO₂ photoreduction and water splitting to produce syngas via precise microenvironment regulation. Herein, a series of UiO-type Eu-MOFs (Eu-bpdc, Eu-bpydc, Ru_x-Eu-bpdc, and Ru_x-Eu-bpydc) with different surrounding confined spaces were designed and synthesized. These photosensitizing Ru_x-Eu-MOFs were used as the molecular platform to encapsulate the [Co^II₄(dpy{OH}O)₄(OAc)₂(H₂O)₂]²⁺ (Co₄) cubane cluster for constructing Co₄@Ru_x-Eu-MOF (x = 0.1, 0.2, and 0.4) heterogeneous photocatalysts for efficient CO₂ photoreduction and water splitting. The H₂ and CO yields can reach 446.6 and 459.8 μmol·g^-1, respectively, in 10 h with Co₄@Ru_0.1-Eu-bpdc as the catalyst, and their total yield can be dramatically improved to 2500 μmol·g^-1 with the ratio of CO/H₂ ranging from 1:1 to 1:2 via changing the photosensitizer content in the confined space. By increasing the N content around the cubane, the photocatalytic performance drops sharply in Co₄@Ru_0.1-Eu-bpydc, but with an enhanced proportion of CO in the final products. In the homogeneous system, the Co₄ cubane was surrounding with Ru photosensitizers via week interactions, which can drive water splitting into H₂ with >99% selectivity. Comprehensive structure-function analysis highlights the important role of microenvironment regulation in the selectivity control via constructing homogeneous and heterogeneous photocatalytic systems. This work provides a new insight for engineering a catalytic microenvironment of the cubane cluster for selectivity control of CO₂ photoreduction and water splitting.

The promotion effect of π-π interactions in Pd NPs catalysed selective hydrogenation

The utilization of weak interactions to improve the catalytic performance of supported metal catalysts is an important strategy for catalysts design, but still remains a big challenge. In this work, the weak interactions nearby the Pd nanoparticles (NPs) are finely tuned by using a series of imine-linked covalent organic frameworks (COFs) with different conjugation skeletons. The Pd NPs embedded in pyrene-COF are ca. 3 to 10-fold more active than those in COFs without pyrene in the hydrogenation of aromatic ketones/aldehydes, quinolines and nitrobenzene, though Pd have similar size and surface structure. With acetophenone (AP) hydrogenation as a model reaction, systematic studies imply that the π-π interaction of AP and pyrene rings in the vicinity of Pd NPs could significantly reduce the activation barrier in the rate-determining step. This work highlights the important role of non-covalent interactions beyond the active sites in modulating the catalytic performance of supported metal NPs.

In Situ Synthesis of CuN4 /Mesoporous N-Doped Carbon for Selective Oxidative Crosscoupling of Terminal Alkynes under Mild Conditions

The 1,3-conjugated diynes are an important class of chemical intermediates, and the selective crosscoupling of terminal alkynes is an efficient chemical process for manufacturing asymmetrical 1,3-conjugated diynes. However, it often occurs in homogenous conditions and costs a lot for reaction treatment. Herein, a copper catalyzed strategy is used to synthesize highly ordered mesoporous nitrogen-doped carbon material (OMNC), and the copper species is in situ transformed into the copper single-atom site with four nitrogen coordination (CuN₄ ). These features make the CuN₄ /OMNC catalyst efficient for selective oxidative crosscoupling of terminal alkynes, and a wide range of asymmetrical and symmetrical 1,3-diynes (26 examples) under mild conditions (40 °C) and low substrates ratio (1.3). Density functional theory (DFT) calculations reveal that the aryl-alkyl crosscoupling has the lowest energy barrier on the CuN₄ site, which can explain the high selectivity. In addition, the catalyst can be separated and reused by simply centrifugation or filtration. This work can open a facile avenue for constructing single-atom loaded mesoporous materials to bridge homogeneous and heterogeneous catalysis.

Improvement and regeneration of Co–B amorphous alloy nanowires for the selective hydrogenation of cinnamaldehyde

Co–B amorphous alloy nanowires exhibited the improvement of catalytic hydrogenation activity and cycling life by plasma treatment.

Synthesis of Sulfonated Porous Organic Polymers with a Hydrophobic Core for Efficient Acidic Catalysis in Organic Transformations

Synthesis of sulfonated porous polymers with improved hydrophobicity and stability is of extreme importance in both academic research and industrial applications. However, there is often a trade-off between acidity and surface hydrophobicity of sulfonated polymers. In this study, we report a strategy for the synthesis of sulfonated porous organic polymers (S-PT) with improved hydrophobicity via free radical polymerization method by using a rigid and large multidentate monomer, 1,3,5-tri(4-vinylphenyl)-benzene, having a hydrophobic core. The results of vapor adsorption measurement show that S-PT has more hydrophobic properties than sulfonated poly(divinylbenzene) (S-PD), attributed to the hydrophobic core of its multidentate monomer. Furthermore, the optimization of sulfonation time established a balance between surface acidity and hydrophobicity. Under optimized conditions, S-PT afforded up to 113 mmol g^-1  h^-1 TOF in the esterification of oleic acid with methanol, more active than commercial Amberlyst-15 with TOF of 15 mmol g^-1  h^-1 and Nafion NR50 with TOF of 7 mmol g^-1  h^-1 . We believe that the findings of this study will provide useful insights to advance the design and synthesis of solid acid catalysts for organic transformations.

Recognition of Water-Induced Effects toward Enhanced Interaction between Catalyst and Reactant in Alcohol Oxidation

Pickering emulsion stabilized by solid nanoparticles provides a diverse solvent microenvironment and enables to promote the phase transfer of reaction substrates/products in catalytic reactions, but the intrinsic role of solvent is still not clear. Herein, using benzyl alcohol (BA) as a model reactant, we demonstrate the nature of the water-promoted activity for alcohol oxidation over the Pd/MgAl-LDO catalyst. Depending on the water in the solvent, we observe different reactivities regarding the proportion of the water in the system. Kinetic isotope effects confirm the participation and positive effects of water for oxidation of BA. The water promotion effects are recognized and identified by the water vapor pulse adsorption coupled with temperature program desorption. Moreover, the adsorption behavior of BA or benzaldehyde at the interface of water and Pd/MgAl-LDO is also investigated by quasi-in-situ Raman spectroscopy. In addition, the mechanism of water-promoted alcohol oxidation is rationally proposed based on the Langmuir-Hinshelwood mechanism. The general applicability of the water promotion effects is further demonstrated over different supports and substrates, which well achieves excellent catalytic activity and selectivity in Pickering emulsion compared to that in the pure toluene system.

Hydrogenation of benzoic acid derivatives over Pt/TiO2 under mild conditions

Hydrogenation of benzoic acid (BA) to cyclohexanecarboxylic acid (CCA) has important industrial and academic significance, however, the electron deficient aromatic ring and catalyst poisoning by carboxyl groups make BA hydrogenation a challenging transformation. Herein, we report that Pt/TiO₂ is very effective for BA hydrogenation with, to our knowledge, a record TOF of 4490 h^-1 at 80 °C and 50 bar H₂, one order higher than previously reported results. Pt/TiO₂ catalysts with electron-deficient and electron-enriched Pt sites are obtained by modifying the electron transfer direction between Pt and TiO₂. Electron-deficient Pt sites interact with BA more strongly than electron-rich Pt sites, helping the dissociated H of the carboxyl group to participate in BA hydrogenation, thus enhancing its activity. The wide substrate scope, including bi- and tri-benzoic acids, further demonstrates the high efficiency of Pt/TiO₂ for hydrogenation of BA derivatives.

Hydrogenation of Toluene to Methyl Cyclohexane over PtRh Bimetallic Nanoparticle-Encaged Hollow Mesoporous Silica Catalytic Nanoreactors

PtRh bimetallic nanoparticle (NP)-encaged hollow mesoporous silica nanoreactors (PtRh@HMSNs) are prepared by employing metal-ion-containing charge-driven polymer micelles as templates. These nanoreactors feature ∼1-2 nm PtRh NPs in ∼11 nm hollow cavities of HMSNs. Among various Pt x Rh y @HMSNs, Pt0.77Rh1@HMSNs show the best catalytic performance for toluene hydrogenation. Under 30 °C, atmospheric H2 pressure, and a toluene/(Pt+Rh) molar ratio of 200/1, Pt0.77Rh1@HMSNs reach 100.0% of methyl cyclohexane yield and demonstrate a much better catalytic performance than monometallic Pt@HMSNs and Rh@HMSNs and their physical mixtures. Moreover, Pt0.77Rh1@HMSNs exhibit a good catalytic stability during recycling experiments. The enhanced performance of Pt0.77Rh1@HMSNs is ascribed to the interaction between Pt and Rh, the beneficial effect of the relatively large mesoporous channels for mass transfer, as well as the confinement effect of functional NPs inside hollow cavities.

Engineering of Yolk/Core-Shell Structured Nanoreactors for Thermal Hydrogenations

Heterogeneous hydrogenation reactions are of great importance for chemical upgrading and synthesis, but still face the challenges of controlling selectivity and long-term stability. To improve the catalytic performance, many hydrogenation reactions utilize special yolk/core-shell nanoreactors (YCSNs) with unique architectures and advantageous properties. This work presents the developmental and technological challenges in the preparation of YCSNs that are potentially useful for hydrogenation reactions, and provides a summary of the properties of these materials. The work also addresses the scientific challenges in applications of these YCSNs in various gas and liquid-phase hydrogenation reactions. The catalyst structures, catalytic performance, structure-performance relationships, reaction mechanisms, and unsolved problems are discussed too. Also, a brief outlook and opportunities for future research in this field are presented. This work on the advancements in YCSNs might inspire the creation of new materials with desired structures for achieving maximal hydrogenation performances.

Highly active ultrafine Pd NPs confined in imine-linked COFs for nitrobenzene hydrogenation

Ultrafine Pd NPs with an average size of 1.8 nm were stabilized on an imine-linked COF. The Pd/COF with electron rich surface properties and a high surface area showed high catalytic activity in the hydrogenation of nitrobenzene.

Boosting Catalysis of Pd Nanoparticles in MOFs by Pore Wall Engineering: The Roles of Electron Transfer and Adsorption Energy

The chemical environment of metal nanoparticles (NPs) possesses significant influence on their catalytic performance yet is far from being well understood. Herein, tiny Pd NPs are encapsulated into the pore space of metal-organic frameworks (MOFs), UiO-66-X (X = H, OMe, NH₂ , 2OH, 2OH(Hf)), affording Pd@UiO-66-X composites. The surface microenvironment of the Pd NPs is readily modulated by pore wall engineering, via the functional group and metal substitution in the MOFs. Consequently, the catalytic activity of Pd@UiO-66-X follows the order of Pd@UiO-66-OH > Pd@UiO-66-2OH(Hf) > Pd@UiO-66-NH₂ > Pd@UiO-66-OMe > Pd@UiO-66-H toward the hydrogenation of benzoic acid. It is found that the activity difference is not only ascribed to the distinct charge transfer between Pd and the MOF, but is also explained by the discriminated substrate adsorption energy of Pd@UiO-66-X (-OH < -2OH(Hf) < -NH₂ < -OMe < -H), based on CO-diffuse reflectance infrared Fourier transform spectra and density-functional theory (DFT) calculations. The Pd@UiO-66-OH, featuring a high Pd electronic state and moderate adsorption energy, displays the highest activity. This work highlights the influence of the surface microenvironment of guest metal NPs, the catalytic activity of which is dominated by electron transfer and the adsorption energy, via the systematic substitution of metal and functional groups in host MOFs.

Pd-Functionalized ZnO:Eu Columnar Films for Room-Temperature Hydrogen Gas Sensing: A Combined Experimental and Computational Approach

Reducing the operating temperature to room temperature is a serious obstacle on long-life sensitivity with long-term stability performances of gas sensors based on semiconducting oxides, and this should be overcome by new nanotechnological approaches. In this work, we report the structural, morphological, chemical, optical, and gas detection characteristics of Eu-doped ZnO (ZnO:Eu) columnar films as a function of Eu content. The scanning electron microscopy (SEM) investigations showed that columnar films, grown via synthesis from a chemical solutions (SCS) approach, are composed of densely packed columnar type grains. The sample sets with contents of ∼0.05, 0.1, 0.15, and 0.2 at% Eu in ZnO:Eu columnar films were studied. Surface functionalization was achieved using PdCl₂ aqueous solution with additional thermal annealing in air at 650 °C. The temperature-dependent gas-detection characteristics of Pd-functionalized ZnO:Eu columnar films were measured in detail, showing a good selectivity toward H₂ gas at operating OPT temperatures of 200-300 °C among several test gases and volatile organic compound vapors, such as methane, ammonia, acetone, ethanol, n-butanol, and 2-propanol. At an operating temperature OPT of 250 °C, a high gas response I_gas/I_air of ∼115 for 100 ppm H₂ was obtained. Experimental results indicate that Eu doping with an optimal content of about 0.05-0.1 at% along with Pd functionalization of ZnO columns leads to a reduction of the operating temperature of the H₂ gas sensor. DFT-based computations provide mechanistic insights into the gas-sensing mechanism by investigating interactions between the Pd-functionalized ZnO:Eu surface and H₂ gas molecules supporting the experimentally observed results. The proposed columnar materials and gas sensor structures would provide a special advantage in the fields of fundamental research, applied physics studies, and ecological and industrial applications.

Synthesis of Podlike Magnetic Mesoporous Silica Nanochains for Use as Enzyme Support and Nanostirrer in Biocatalysis

Magnetic mesoporous materials have attracted great interest due to their combined property of magnetic nanomaterials and mesoporous materials as well as their potential applications in catalysis, bioenrichment, drug delivery, nanoreactors, etc. In this study, one-dimensional (1D) podlike magnetic mesoporous silica nanochains with tunable hollow space (Fe₃O₄@nSiO₂@void@mSiO₂ nanochain named as podlike 1D magnetic mesoporous silica (PL-MMS) nanochain) are rationally synthesized for the first time through a controlled magnetic-induced interface coassembly approach. The obtained PL-MMS possesses a tunable diameter (300-500 nm), large and perpendicular mesopores (8.2 nm) in the outer shell, a silica-protected magnetic-responsive core, and a high surface area (325 m²/g). Benefiting from the large voids and unique mesopores, these mesoporous nanochains exhibit superior performance in enzyme (lipase with a size of 4.0 nm) immobilization with a high loading capacity of 223 μg/mg, and the immobilized lipase demonstrates enhanced catalytic activity in different pH values and temperatures as well as excellent tolerance of organic solvent.

Amphiphilic Mesoporous Sandwich-Structured Catalysts for Selective Hydrogenation of 4-Nitrostyrene in Water

Selective catalytic hydrogenation of substituted nitro compounds (NCs) of hydrophobic nature in aqueous solution using transition-metal-based catalysts is highly desirable yet fairly challenging. Herein, we propose the idea of amphiphilic mesoporous catalysts for selective hydrogenation of hydrophobic NCs in aqueous solution. The amphiphilic catalyst Co@Co-N-C@SBA-15 with a sandwich-like structure is constructed by a one-step solvent-free melting coating method. The catalyst has an external hydrophilic silica support that facilitates catalyst dispersion in water. It has unique Co-N-C catalytic layers uniformly coated in the inner mesopore surfaces of the silica support, which enhance the selective adsorption and activation of hydrophobic NCs. It has a high surface area (448.2 m²/g) and a uniform mesopore size (∼7.0 nm) for fast mass transportation. It possesses ultrafine metallic Co nanoparticles uniformly anchored within the N-doped carbon (N-C) layers for easy magnetic separation. These features make the catalyst excellent for the selective hydrogenation of 4-nitrostyrene to form 4-aminostyrene, with a high conversion of 98.0% in 1.0 h, a superior selectivity of 98.8%, and a good stability under mild conditions. A comprehensive study confirms the excellence of the amphiphilic mesoporous catalysts compared with other control catalysts. The Co-N sites are the intrinsic active sites. They can selectively adsorb and activate the nitro groups other than the vinyl groups, leading to superior selectivity. Water as the solvent results in the best performance compared with typical organic solvents probably because of an enhanced water-mediated hydrogen spillover and transfer.