Topochemical Synthesis of Two-Dimensional Transition-Metal Phosphides Using Phosphorene Templates

Transition metal phosphides: synthesis nanoarchitectonics, catalytic properties, and biomass conversion applications

Developing inexpensive and efficient catalysts for biomass hydrogenation or hydrodeoxygenation (HDO) is essential for efficient energy conversion. Transition metal phosphides (TMPs), with the merits of abundant active sites, unique physicochemical properties, tunable component structures, and excellent catalytic activities, are recognized as promising biomass hydrogenation or HDO catalytic materials. Nevertheless, the biomass hydrogenation or HDO catalytic applications of TMPs are still limited by various complexities and inherent performance bottlenecks, and thus their future development and utilization remain to be systematically sorted out and further explored. This review summarizes the current popular strategies for the preparation of TMPs. Subsequently, based on the structural and electronic properties of TMPs, the catalytic activity origins of TMPs in biomass hydrogenation or HDO is elucidated. Additionally, the application of TMPs in efficient biomass hydrogenation or HDO catalysis, as well as highly targeted multiscale strategies to enhance the catalytic performance of TMPs, are comprehensively described. Finally, large-scale amplification synthesis, rational construction of TMP-based catalysts and in-depth study of the catalytic mechanism are also mentioned as challenges and future directions in this research field. Expectedly, this review can provide professional and targeted guidance for the rational design and practical application of TMPs biomass hydrogenation or HDO catalysts.

Topochemical-like bandgap regulation engineering: A bismuth thiooxide nanocatalyst for breast cancer phototherapy

The physical property tuning of nanomaterials is of great importance in energy, medicine, environment, catalysis, and other fields. Topochemical synthesis of nanomaterials can achieve precise control of material properties. Here, we synthesized a kind of element-doped bismuth-based nanomaterial (BOS) by topochemical-like synthesis and used it for the phototherapy of tumors. In this study, we employed bismuth fluoride nanoflowers as a template and fabricated element-doped bismuth oxide nanoflowers by reduction conditions. The product is consistent with the precursor in crystal structure and nanomorphology, realizing topochemical-like synthesis under mild conditions. BOS can generate reactive oxygen species, consume glutathione, and perform photothermal conversion under 730 nm light irradiation. In vitro and in vivo studies demonstrate that BOS could suppress tumor growth by inducing apoptosis and ferroptosis through phototherapy. Therefore, this study offers a general regulation method for tuning the physical properties of nanomaterials by using a topochemical-like synthesis strategy.

Unravelling the Bi-Functional Electrocatalytic Properties of {Mo72Fe30} Polyoxometalate Nanostructures for Overall Water Splitting Using Scanning Electrochemical Microscope and Electrochemical Gating Methods

This study reports the use of Keplerate-type {Mo72Fe30} polyoxometalate (POMs) nanostructures as a bi-functional-electrocatalyst for HER and OER in an alkaline medium with a lower overpotential (135 mV for HER and 264 mV for OER), and excellent electrochemical stability. The bi-functional catalytic properties of {Mo72Fe30} POM are studied using a scanning electrochemical microscope (SECM) via current mapping using substrate generation and tip collection mode. Furthermore, the bipolar nature of the {Mo72Fe30} POM nano-electrocatalysts is studied using the electrochemical gating via simultaneous monitoring of the electrochemical (cell) and electrical ({Mo72Fe30} POM) signals. Next, a prototype water electrolyzer fabricated using {Mo72Fe30} POM electrocatalysts showed they can drive 10 mA cm-2 with a low cell voltage of 1.62 V in lab-scale test conditions. Notably, the {Mo72Fe30} POM electrolyzers' performance assessment based on recommended conditions for industrial aspects shows that they require a very low overpotential of 1.89 V to drive 500 mA cm-2, highlighting their promising candidature toward clean-hydrogen production.

State-of-the-Art Two-Dimensional Metal Phosphides for High Performance Lithium-ion Batteries: Progress and Prospects

Lithium-ion batteries (LIBs) with high energy density, long cycle life and safety have earned recognition as outstanding energy storage devices, and have been used in extensive applications, such as portable electronics and new energy vehicles. However, traditional graphite anodes deliver low specific capacity and inferior rate performance, which is difficult to satisfy ever-increasing demands in LIBs. Very recently, two-dimensional metal phosphides (2D MPs) emerge as the cutting-edge materials in LIBs due to their overwhelming advantages including high theoretical capacity, excellent conductivity and short lithium diffusion pathway. This review summarizes the up-to-date advances of 2D MPs from typical structures, main synthesis methods and LIBs applications. The corresponding lithium storage mechanism, and relationship between 2D structure and lithium storage performance is deeply discussed to provide new enlightening insights in application of 2D materials for LIBs. Several potential challenges and inspiring outlooks are highlighted to provide guidance for future research and applications of 2D MPs.

A Review of Rechargeable Zinc-Air Batteries: Recent Progress and Future Perspectives

Zinc-air batteries (ZABs) are gaining attention as an ideal option for various applications requiring high-capacity batteries, such as portable electronics, electric vehicles, and renewable energy storage. ZABs offer advantages such as low environmental impact, enhanced safety compared to Li-ion batteries, and cost-effectiveness due to the abundance of zinc. However, early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox kinetics. Recent advancements in restructuring the anode, utilizing alternative electrolytes, and developing bifunctional oxygen catalysts have significantly improved ZABs. Scientists have achieved battery reversibility over thousands of cycles, introduced new electrolytes, and achieved energy efficiency records surpassing 70%. Despite these achievements, there are challenges related to lower power density, shorter lifespan, and air electrode corrosion leading to performance degradation. This review paper discusses different battery configurations, and reaction mechanisms for electrically and mechanically rechargeable ZABs, and proposes remedies to enhance overall battery performance. The paper also explores recent advancements, applications, and the future prospects of electrically/mechanically rechargeable ZABs.

Transformation of Black Phosphorus through Lattice Reconstruction for NIR-II-Responsive Cancer Therapy

The photothermal performance of black phosphorus (BP) in the near infrared (NIR)-II bio-window (1000-1500 nm) is low, which limits its biomedical applications. Herein, ultrasmall nickel phosphide quantum dots (Ni2 P QDs) are synthesized with BP quantum dots (BPQDs) as the template by topochemical transformation. The size of Ni2 P QDs is ≈3.5 nm, similar to that of BPQDs, whereas the absorption and photothermal conversion efficiency of Ni2 P QDs at 1064 nm (43.5%) are significantly improved compared with those of BPQDs. To facilitate in vivo applications, an Ni2 P QDs-based liposomal nano-platform (Ni2 P-DOX@Lipo-cRGD) is designed by incorporation of Ni2 P QDs and doxorubicin (DOX) into liposomal bilayers and the interior, respectively. The encapsulated DOX is responsively released from liposomes upon 1064-nm laser irradiation owing to the photothermal effect of Ni2 P QDs, and the drug release rate and amount are controlled by the light intensity and exposure time. In vivo, experiments show that Ni2 P-DOX@Lipo-cRGD has excellent tumor target capability and biocompatibility, as well as complete tumor ablation through the combination of photothermal therapy and chemotherapy. The work provides a new paradigm for the NIR-II transformation of nano-materials and may shed light on the construction of multifunctional nano-platforms for cancer treatment.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Highly efficient photocatalytic hydrogen production by ZnCdS composite catalyst modified with NiCoP nanosheets prepared by LDH precursor

The unique characteristics and diverse applications of 2D transition metal phosphides have aroused significant interest. In this paper, we successfully prepared 2D NiCoP modified ZnCdS composite. The NiCoP nanosheets were successfully obtained by phosphating layered double hydroxide (LDH) precursor. The results show that the ZnCdS-8%NiCoP has the highest photocatalytic performance among all the composite photocatalysts with the H2 evolution rate of 1370.1 µmol h-1, which is 17.9 folds higher than obtained with pure ZnCdS. Detailed analysis reveal that NiCoP nanosheets functions as an excellent electron acceptor, speeding up the directed migration of electrons. Furthermore, the rational mechanism of photocatalytic has been presented based on density function theory (DFT) calculations, which is well congruent with experimental results. Our research offers a simple, environmentally benign, and scalable technique for making highly effective photocatalysts, as well as a novel perspective on transition metal phosphides rational design.

Novel noble-metal-free Co2P/CdIn2S4 heterojunction photocatalysts for elevated photocatalytic H2 production: Light absorption, charge separation and active site

Constructing heterojunctions is an effective and controllable approach that can boost the activity of photocatalysts. Inspiringly, this study explored a simple method that can be used to construct novel noble-metal-free Co₂P/CdIn₂S₄ (CPCIS) heterojunction photocatalysts for photocatalytic hydrogen production. The heterojunction was formed by loading CdIn₂S₄ (CIS) nanoparticles on the surface of Co₂P (CP). The structure, morphology, and optical property of the as-prepared samples were characterized by a series of tests. The DRS results showed that, the light absorption range of CPCIS was extended to the full visible light range and its light absorption intensity obviously was enhanced at 500-800 nm. The PL and photoelectrochemical tests manifested that the formed heterojunction promoted the separation of charges. The LSV results indicated that CP reduced the H₂ evolution overpotential of the composites. Besides, CP could serve as active sites of H₂ evolution in heterojunction composites. Interestingly, the H₂-evolution rate for the optimum CPCIS (471.87 μmol h^-1 g^-1) was around 3.6 times than CIS-Pt. The elevated activity of CPCIS may mainly attribute to the following aspects: its enhanced light absorption, elevated charge separation and increased active site. More importantly, the photocatalytic activity of heterojunction composites didn't almost decrease after three cycles. This article delivers an idea that can be applied to form heterojunctions between CP and other sulfides for photocatalytic H₂ production, easily extending to other transition metal phosphides.

Transition Metal Phosphide Nanoarchitectonics for Versatile Organic Catalysis

Transition metal phosphides (TMP) posses unique physiochemical, geometrical, and electronic properties, which can be exploited for different catalytic applications, such as photocatalysis, electrocatalysis, organic catalysis, etc. Among others, the use of TMP for organic catalysis is less explored and still facing many complex challenges, which necessitate the development of sustainable catalytic reaction protocols demonstrating high selectivity and yield of the desired molecules of high significance. In this regard, the controlled synthesis of TMP-based catalysts and thorough investigations of underlying reaction mechanisms can provide deeper insights toward practical achievement of desired applications. This review aims at providing a comprehensive analysis on the recent advancements in the synthetic strategies for the tailored and tunable engineering of structural, geometrical, and electronic properties of TMP. In addition, their unprecedented catalytic potential toward different organic transformation reactions is succinctly summarized and critically analyzed. Finally, a rational perspective on future opportunities and challenges in the emerging field of organic catalysis is provided. On the account of the recent achievements accomplished in organic synthesis using TMP, it is highly anticipated that the use of TMP combined with advanced innovative technologies and methodologies can pave the way toward large scale realization of organic catalysis.

Rapid microwave-assisted synthesis of Ni2P nanosheets from black phosphorus

The high dielectric loss tangent value of black phosphorus nanosheets enables them to be selectively heated under microwave radiation to realize the in situ surface reaction of BP with Ni²⁺ to prepare thermodynamically unstable two-dimensional Ni₂P.

Preparation of 2D Molybdenum Phosphide via Surface-Confined Atomic Substitution

The emerging nonlayered 2D materials (NL2DMs) are sparking immense interest due to their fascinating physicochemical properties and enhanced performance in many applications. NL2DMs are particularly favored in catalytic applications owing to the extremely large surface area and low-coordinated surface atoms. However, the synthesis of NL2DMs is complex because their crystals are held together by strong isotropic covalent bonds. Here, nonlayered molybdenum phosphide (MoP) with well-defined 2D morphology is synthesized from layered molybdenum dichalcogenides via surface-confined atomic substitution. During the synthesis, the molybdenum dichalcogenide nanosheet functions as the host matrix where each layer of Mo maintains their hexagonal arrangement and forms isotropic covalent bonds with P that substitutes S, resulting in the conversion from layered van der Waals material to a covalently bonded NL2DM. The MoP nanosheets converted from few-layer MoS₂ are single crystalline, while those converted from monolayers are amorphous. The converted MoP demonstrates metallic charge transport and desirable performance in the electrocatalytic hydrogen evolution reaction (HER). More importantly, in contrast to MoS₂ , which shows edge-dominated HER performance, the edge and basal plane of MoP deliver similar HER performance, which is correlated with theoretical calculations. This work provides a new synthetic strategy for high-quality nonlayered materials with well-defined 2D morphology for future exploration.

Synthesis of 2D anatase TiO2 with highly reactive facets by fluorine-free topochemical conversion of 1T-TiS2 nanosheets

Two-dimensional (2D) anatase titanium dioxide (TiO₂) is expected to exhibit different properties as compared to anatase nanocrystallites, due to its highly reactive exposed facets. However, access to 2D anatase TiO₂ is limited by the non-layered nature of the bulk crystal, which does not allow use of top-down chemical exfoliation. Large efforts have been dedicated to the growth of 2D anatase TiO₂ with high reactive facets by bottom-up approaches, which relies on the use of harmful chemical reagents. Here, we demonstrate a novel fluorine-free strategy based on topochemical conversion of 2D 1T-TiS₂ for the production of single crystalline 2D anatase TiO₂, exposing the {001} facet on the top and bottom and {100} at the sides of the nanosheet. The exposure of these faces, with no additional defects or doping, gives rise to a significant activity enhancement in the hydrogen evolution reaction, as compared to commercially available Degussa P25 TiO₂ nanoparticles. Because of the strong potential of TiO₂ in many energy-based applications, our topochemical approach offers a low cost, green and mass scalable route for production of highly crystalline anatase TiO₂ with well controlled and highly reactive exposed facets.

Transition Metal Non-Oxides as Electrocatalysts: Advantages and Challenges

The identification of hydrogen as green fuel in the near future has stirred global realization toward a sustainable outlook and thus boosted extensive research in the field of water electrolysis focusing on the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). A huge class of compounds consisting of transition metal-based nitrides, carbides, chalcogenides, phosphides, and borides, which can be collectively termed transition metal non-oxides (TMNOs), has emerged recently as an efficient class of electrocatalysts in terms of performance and longevity when compared to transition metal oxides (TMOs). Moreover, the superiority of TMNOs over TMOs to effectively catalyze not only OERs but also HERs and ORRs renders bifunctionality and even trifunctionality in some cases and therefore can replace conventional noble metal electrocatalysts. In this review, the crystal structure and phases of different classes of nanostructured TMNOs are extensively discussed, focusing on recent advances in design strategies by various regulatory synthetic routes, and hence diversified properties of TMNOs are identified to serve as next-generation bi/trifunctional electrocatalysts. The challenges and future perspectives of materials in the field of energy conversion and storage aiding toward a better hydrogen economy are also discussed in this review.

Hexagonal Single-Crystal CoS Nanosheets: Controllable Synthesis and Tunable Oxygen Evolution Performance

Cobalt-based sulfides with variable valence states and unique physical and chemical properties have shown great potential as oxygen evolution reaction (OER) catalysts for electrochemical water-splitting reactions. However, poor morphological characteristics and a small specific surface area limit its further application. Here, hexagonal single-crystal two-dimensional (2D) CoS nanosheets with different thicknesses are successfully prepared by an atmospheric-pressure chemical vapor deposition method. Because of the advantages of the 2D structure, more exposed catalytic active sites, better reactant adsorption ability, accelerated electron transfer, and enhanced electrical conductivities can be achieved from the thinnest 5 nm CoS nanosheets (CoS-5), significantly improving OER performance. The electrochemical tests manifest that CoS-5 show an overpotential of 290 mV at 10 mA cm^-2 and a Tafel slope of 65.6 mV dec^-1 in the OER in an alkaline solution, superior to those for other thicknesses of CoS, bulk CoS, and RuO₂. For the mechanistic investigation, the lowest charge transfer resistance (R_ct) and the highest double-layer capacitance (C_dl) were obtained for CoS-5, demonstrating the faster OER kinetics and the larger active area. Density functional theory calculations further reveal the enhanced density of states around the Fermi level and higher H₂O molecule adsorption energy for thinner CoS nanosheets, promoting its intrinsic catalytic activity. Moreover, the two-electrode system with CoS-5 as the anode and Pt/C as the cathode requires only 1.56 V to attain 10 mA cm^-2 in the overall water-splitting reaction. We believe that this study will provide a fresh view for thickness-dependent catalytic performance and offers a new material for the study of electronic and energy devices.

From Hydrogen Bond to van der Waals Force: Molecular Scalpel Strategy to Exfoliate a Two-Dimensional Metal-Organic Nanosheet

The facile exfoliation of a two-dimensional metal-organic nanosheet of {[Co(HL)(H₂O)(Py)_3/4]·¹/₂H₂O·DMF}_n [1-Py; H₃L = 5-(1H-pyrazol-4-yl)isophthalic acid and Py = pyridine] was achieved, via a molecular scalpel strategy, by weakening intermolecular forces between adjacent layers. The resulting 1-Py/KB40 (KB = Ketjen black) shows an increased oxygen evolution reaction (OER) performance with an overpotential of 370 mV at a current density of 10 mA cm^-2 and a Tafel slope of 58 mV dec^-1. This work sheds light on the structure-morphology-reactivity relationship of such materials in OER.

Electron Matters: Recent Advances in Passivation and Applications of Black Phosphorus

2D materials have experienced rapid and explosive development in the past decades. Among them, black phosphorus (BP) is one of the most promising materials on account of its thickness-dependent bandgap, high charge-carrier mobility, in-plane anisotropic structure, and excellent biocompatibility, as well as the broad applications brought by the properties. In view of the electron configuration, the most unique feature of BP is the lone-pair electrons on each P atom. The lone-pair electrons inevitably cause high reactivity of BP, particularly toward water/oxygen, which greatly limits the practical application of BP under ambient conditions. The other side of the coin is that BP can serve as an electron donor to promote the construction of BP-based hybrid materials and/or to boost the performance of BP or BP-based hybrid materials in applications. Here, recent advances in passivation and application of BP by addressing the interaction between the lone-pair electrons of BP and the other materials are discussed, and prospects for future research on BP are also proposed.

Molecularly Engineered Black Phosphorus Heterostructures with Improved Ambient Stability and Enhanced Charge Carrier Mobility

Overcoming the intrinsic instability and preserving unique electronic properties are key challenges for the practical applications of black phosphorus (BP) under ambient conditions. Here, it is demonstrated that molecular heterostructures of BP and hexaazatriphenylene derivatives (BP/HATs) enable improved environmental stability and charge transport properties. The strong interfacial coupling and charge transfer between the HATs and the BP lattice decrease the surface electron density and protect BP sheets from oxidation, resulting in an excellent ambient lifetime of up to 21 d. Importantly, HATs increase the charge scattering time of BP, contributing to an improved carrier mobility of 97 cm² V^-1 s^-1 , almost three times of the pristine BP films, based on noninvasive THz spectroscopic studies. The film mobility is an order of magnitude larger than previously reported values in exfoliated 2D materials. The strategy opens up new avenues for versatile applications of BP sheets and provides an effective method for tuning the physicochemical properties of other air-sensitive 2D semiconductors.

Iron and chromium co-doped cobalt phosphide porous nanosheets as robust bifunctional electrocatalyst for efficient water splitting

It is still a huge challenge to develop highly efficient and low-cost non-precious metal-based electrocatalysts for overall water splitting in alkaline electrolytes. Herein, Cr and Fe co-doped CoP porous mesh nanosheets (Mesh-CrFe-CoP NSs) were synthesized through hydrolysis reaction, ion exchange etching and subsequent low-temperature phosphating process. The Mesh-CrFe-CoP NSs provides overpotentials at a current density of 10 mA cm^-2under alkaline electrolyte of 103.7 mV and 256.4 mV for HER and OER, respectively. Furthermore, when using Mesh-CrFe-CoP NSs as anode and cathode, the water splitting system could afford a current density of 10 mA cm^-2at 1.55 V, which is better than an electrolytic cell composed of 20% Pt/C and RuO₂. The excellent electrocatalytic performance of Mesh-CrFe-CoP NSs is attributed to the co-doping and porous nanostructure. Specifically, the Cr and Fe co-doped porous CoP nanosheets electrocatalyst not only provided abundant exposure active sites, accelerated the entry of liquid and the diffusion of gas, but also regulated the electronic environment of active sites, and thus enhanced the electrochemical performance. This work proposes a strategy for the rational design of highly efficient and stable non-precious metal co-doped phosphide electrocatalysts in the of electrochemical water splitting.

Symbolic Transformer Accelerating Machine Learning Screening of Hydrogen and Deuterium Evolution Reaction Catalysts in MA2Z4 Materials

Two-dimensional (2D) materials have been developed into various catalysts with high performance, but employing them for developing highly stable and active nonprecious hydrogen evolution reaction (HER) catalysts still encounters many challenges. To this end, the machine learning (ML) screening of HER catalysts is accelerated by using genetic programming (GP) of symbolic transformers for various typical 2D MA₂Z₄ materials. The values of the Gibbs free energy of hydrogen adsorption (ΔG_H*) are accurately and rapidly predicted via extreme gradient boosting regression by using only simple GP-processed elemental features, with a low predictive root-mean-square error of 0.14 eV. With the analysis of ML and density functional theory (DFT) methods, it is found that various electronic structural properties of metal atoms and the p-band center of surface atoms play a crucial role in regulating the HER performance. Based on these findings, NbSi₂N₄ and VSi₂N₄ are discovered to be active catalysts with thermodynamical and dynamical stability as ΔG_H* approaches to zero (-0.041 and 0.024 eV). In addition, DFT calculations reveal that these catalysts also exhibit good deuterium evolution reaction (DER) performance. Overall, a multistep workflow is developed through ML models combined with DFT calculations for efficiently screening the potential HER and DER catalysts from 2D materials with the same crystal prototype, which is believed to have significant contribution to catalyst design and fabrication.

Atomically Thin Materials for Next-Generation Rechargeable Batteries

Atomically thin materials (ATMs) with thicknesses in the atomic scale (typically <5 nm) offer inherent advantages of large specific surface areas, proper crystal lattice distortion, abundant surface dangling bonds, and strong in-plane chemical bonds, making them ideal 2D platforms to construct high-performance electrode materials for rechargeable metal-ion batteries, metal-sulfur batteries, and metal-air batteries. This work reviews the synthesis and electronic property tuning of state-of-the-art ATMs, including graphene and graphene derivatives (GE/GO/rGO), graphitic carbon nitride (g-C₃N₄), phosphorene, covalent organic frameworks (COFs), layered transition metal dichalcogenides (TMDs), transition metal carbides, carbonitrides, and nitrides (MXenes), transition metal oxides (TMOs), and metal-organic frameworks (MOFs) for constructing next-generation high-energy-density and high-power-density rechargeable batteries to meet the needs of the rapid developments in portable electronics, electric vehicles, and smart electricity grids. We also present our viewpoints on future challenges and opportunities of constructing efficient ATMs for next-generation rechargeable batteries.

A valence balancing rule for the design of bimetallic phosphides targeting high thermoelectric performance

Two-dimensional (2D) materials with outstanding electronic and mechanical properties have attracted considerable attention as efficient thermoelectric materials. Here, we propose a generalized eight-valence electron rule for designing 2D semiconductor materials, i.e., metal-shrouded bimetallic phosphides ABP (A: group IA element, B: group IIA element). Following this rule, we screen out ten stable semiconductors (LiMgP, LiCaP, LiSrP, NaBeP, NaMgP, KMgP, KCaP, RbMgP, RbCaP and RbSrP) with tunable bandgaps in the range of 0.35-2.40 eV by comprehensive first-principles calculations. Among them, the electron mobility of RbMgP can be as high as 2.3 × 10⁴ cm² V^-1 s^-1, and the hole mobility of KMgP is estimated to be 9.9 × 10³ cm² V^-1 s^-1. Moreover, KMgP, KCaP, RbCaP and RbSrP exhibit an ultralow thermal conductivity of 0.02, 0.14, 0.08 and 0.14 W m^-1 K^-1, respectively. As a result, KMgP and RbCaP monolayers are p-type or n-type thermoelectric materials with a figure of merit of 2.25 and 1.13 at room temperature, respectively. The underlying mechanism of high electron conductivity and low thermal conductivity has been correlated with their unique bonding characteristics, narrow phonon band gap and the scattering from low-frequency phonons. This work demonstrates not only a guiding electron principle to design stable 2D semiconductors, but also a powerful metal-shrouded strategy for discovering high performance thermoelectric materials by decoupling electronic and thermal transport properties.

Accelerated Photoreduction of CO2 to CO over a Stable Heterostructure with a Seamless Interface

Photocatalytic CO₂ reduction is a means of alleviating energy crisis and environmental deterioration. In this work, a rising two-dimensional (2D) material rarely reported in the field of photocatalytic CO₂ reduction, black phosphorus (BP) nanosheets, is synthesized, on which Co₂P is in situ grown by solvothermal treatment using BP itself as a P source. Co₂P on the BP nanosheets (BPs) surface can prevent the destruction of BPs in ambient air and, in the meantime, favor charge separation and CO₂ adsorption and activation during the catalytic process. Upon light irradiation, Co₂P can extract the photogenerated electrons effectively across the intimate interface and lower the CO₂ activation energy barrier, supported by both experimental characterizations and theoretical calculations. Benefitting from integrated advantages of BPs and Co₂P, the optimal Co₂P/BPs exhibit photocatalytic reduction of CO₂ to CO at a rate of 25.5 μmol g^-1 h^-1 with a selectivity of 91.4%, both of which are higher than those of pristine BPs. This work presents ideas for stabilizing BPs and improving their CO₂ reduction performance simultaneously.

A Universal Atomic Substitution Conversion Strategy Towards Synthesis of Large-Size Ultrathin Nonlayered Two-Dimensional Materials

Nonlayered two-dimensional (2D) materials have attracted increasing attention, due to novel physical properties, unique surface structure, and high compatibility with microfabrication technique. However, owing to the inherent strong covalent bonds, the direct synthesis of 2D planar structure from nonlayered materials, especially for the realization of large-size ultrathin 2D nonlayered materials, is still a huge challenge. Here, a general atomic substitution conversion strategy is proposed to synthesize large-size, ultrathin nonlayered 2D materials. Taking nonlayered CdS as a typical example, large-size ultrathin nonlayered CdS single-crystalline flakes are successfully achieved via a facile low-temperature chemical sulfurization method, where pre-grown layered CdI₂ flakes are employed as the precursor via a simple hot plate assisted vertical vapor deposition method. The size and thickness of CdS flakes can be controlled by the CdI₂ precursor. The growth mechanism is ascribed to the chemical substitution reaction from I to S atoms between CdI₂ and CdS, which has been evidenced by experiments and theoretical calculations. The atomic substitution conversion strategy demonstrates that the existing 2D layered materials can serve as the precursor for difficult-to-synthesize nonlayered 2D materials, providing a bridge between layered and nonlayered materials, meanwhile realizing the fabrication of large-size ultrathin nonlayered 2D materials.

Intrinsic ferroelectricity and large bulk photovoltaic effect in novel two-dimensional buckled honeycomb-like lattice of NbP: first-principles study

Using first-principles calculations, we predict that the two-dimensional (2D) monolayers of NbP with the buckled honeycomb-like and puckered tetragonal structure can be obtained from the (110) and (001) orientations, respectively, of its bulk crystal structure. The electronic properties of these monolayers are spectacularly different as tetragonal lattice is metallic whereas the honeycomb-like lattice (h-NbP) is a semiconductor and exhibits intrinsic ferroelectricity originating from a raresd²-sp²hybridization. The shift current bulk photovoltaic effect (BPVE) is systematically investigated in the h-NbP monolayer (1.21 Å thickness) using the Wannier interpolation method. Strong absorption of visible light at ∼2 eV and a large 3D shift current of ∼180μA V^-2is obtained which is attributed to the partial delocalization of Bloch states due tosd²-sp²hybridization. We compare the shift current response of h-NbP monolayer with that of some previously reported bulk ferroelectrics and 2D monolayers, suggesting that h-NbP monolayer can yield a large shift current at an ultimate thickness and is a promising 2D material for the BPVE application under the visible light. Strain effect is also investigated, revealing that the h-NbP monolayer is dynamically stable up to a strain limit of ±3%, and the shift current increases by ∼9% at a compressive strain of -3% as the Bloch states are more delocalized due to the strengthening ofsd²-sp²hybridization. The results presented in this study can pave the paths to fabricate the 2D monolayered structures of NbP, and realize the BPVE based next-generation solar cells of h-NbP monolayer.

Electronic Modulation of Non-van der Waals 2D Electrocatalysts for Efficient Energy Conversion

The exploration of efficient electrocatalysts for energy conversion is important for green energy development. Owing to their high surface areas and unusual electronic structure, 2D electrocatalysts have attracted increasing interest. Among them, non-van der Waals (non-vdW) 2D materials with numerous chemical bonds in all three dimensions and novel chemical and electronic properties beyond those of vdW 2D materials have been studied increasingly over the past decades. Herein, the progress of non-vdW 2D electrocatalysts is critically reviewed, with a special emphasis on electronic structure modulation. Strategies for heteroatom doping, vacancy engineering, pore creation, alloying, and heterostructure engineering are analyzed for tuning electronic structures and achieving intrinsically enhanced electrocatalytic performances. Lastly, a roadmap for the future development of non-vdW 2D electrocatalysts is provided from material, mechanism, and performance viewpoints.

Bifunctional and Self-Supported NiFeP-Layer-Coated NiP Rods for Electrochemical Water Splitting in Alkaline Solution

Designing efficient and robust nonprecious metal-based electrocatalysts for overall water electrolysis, which is mainly limited by the oxygen evolution reaction (OER), for hydrogen production remains a major challenge for the hydrogen economy. In this work, a bimetallic NiFeP catalyst is coated on nickel phosphide rods grown on nickel foam (NiFeP@NiP@NF). This self-supported and interfacially connected electrode structure is favorable for mass transfer and reducing electrical resistance during electrocatalysis. The preparation of NiFeP@NiP@NF is optimized in terms of (i) the coprecipitation time of the NiFe Prussian blue analogue layer that serves as phosphides precursor and (ii) the phosphidation temperature. The optimized sample exhibits excellent OER performance delivering current densities of 10 and 100 mA cm^-2 at low overpotentials of 227 and 252 mV in 1.0 M KOH, respectively, and maintaining 10 mA cm^-2 for more than 120 h without obvious degradation. Moreover, it can also be operated as a hydrogen evolution electrocatalyst, requiring an overpotential of 105 mV at 10 mA cm^-2 in the same medium. Thus, the as-prepared material was tentatively utilized as a bifunctional electrocatalyst in a symmetric electrolyzer, requiring a voltage bias of 1.57 V to afford 10 mA cm^-2 in 1.0 M KOH, while exhibiting outstanding stability.

In Situ Anchoring Polymetallic Phosphide Nanoparticles within Porous Prussian Blue Analogue Nanocages for Boosting Oxygen Evolution Catalysis

The controllable synthesis of metal-based nanoclusters for heterogeneous catalytic reactions has received considerable attention. Nevertheless, manufacturing these architectures, while avoiding aggregation and retaining surface activity, remains challenging. Herein, for the first time we designed NiCoFe-Prussian blue analogue (PBA) nanocages as a support for in situ dispersion and anchoring of polymetallic phosphide nanoparticles (pMP-NPs). Benefiting from the porous surfaces and the synergistic effects between pMP-NPs and the cyano groups in PBA, the NiCoFe-P-NP@NiCoFe-PBA nanocages exhibit a significantly enhanced catalytic activity for oxygen evolution reaction (OER) with an overpotential of 223 mV at 10 mA cm^-2 and a Tafel slope of 78 mV dec^-1, outperforming the NiCoFe-PBA nanocubes, NiCoFe-P nanocages, NiFe-P-NP@NiFe-PBA nanocubes, and CoFe-P-NP@CoFe-PBA nanoboxes. This work not only offers the synthesis strategy of in situ anchoring pMP-NPs on PBA nanocages but also provides a new insight into optimized Gibbs free energy of OER by regulating electron transfer from metallic phosphides to PBA substrate.

The use of amino-based functional molecules for the controllable synthesis of noble-metal nanocrystals: a minireview

Controlling the morphologies and structures of noble-metal nanocrystals has always been a frontier field in electrocatalysis. Functional molecules such as capping agents, surfactants and additives are indispensable in shape-control synthesis. Amino-based functional molecules have strong coordination abilities with metal ions, and they are widely used in the morphology control of nanocrystals. In this minireview, we pay close attention to recent advances in the use of amino-based functional molecules for the controllable synthesis of noble-metal nanocrystals. The effects of various amino-based molecules on differently shaped noble-metal nanocrystals, including zero-, one-, two-, and three-dimensional nanocrystals, are reviewed and summarized. The roles and mechanisms of amino-based small molecules and long-chain ammonium salts relating to the morphology-control synthesis of noble-metal nanocrystals are highlighted. Relationships between shape and electrocatalytic properties are also described. Finally, some key prospects and challenges relating to the controllable synthesis of noble-metal nanocrystals and their electrocatalytic applications are proposed.

Enhanced performance of Mo2P monolayer as lithium-ion battery anode materials by carbon and nitrogen doping: a first principles study

By means of density functional theory (DFT) computations, we explored the potential of carbon- and nitrogen-doped Mo2P (CMP and NMP) layered materials as the representative of transition metal phosphides (TMPs) for the development of lithium-ion battery (LIB) anode materials, paying special attention to the synergistic effects of the dopants. Both CMP and NMP have exceptional stabilities and excellent electronic conductivity, and a high theoretical maximum storage capacity of ∼ 486 mA h g-1. Li-ion diffusion barriers on the two-dimensional (2D) CMP and NMP surfaces are extremely low (∼0.036 eV), and it is expected that on these 2D layers Li can diffuse 104 times faster than that on MoS2 and graphene at room temperature, and both monolayers have relatively low average open-circuit voltage (0.38 and 0.4 eV). All these exceptional properties make CMP and NMP monolayers as promising candidates for high-performance LIB anode materials, which also demonstrates that simple doping is an effective strategy to enhance the performance of anode materials in rechargeable batteries.

Understanding Selectivity in CO2 Hydrogenation to Methanol for MoP Nanoparticle Catalysts Using In Situ Techniques

Molybdenum phosphide (MoP) catalyzes the hydrogenation of CO, CO2, and their mixtures to methanol, and it is investigated as a high-activity catalyst that overcomes deactivation issues (e.g., formate poisoning) faced by conventional transition metal catalysts. MoP as a new catalyst for hydrogenating CO2 to methanol is particularly appealing for the use of CO2 as chemical feedstock. Herein, we use a colloidal synthesis technique that connects the presence of MoP to the formation of methanol from CO2, regardless of the support being used. By conducting a systematic support study, we see that zirconia (ZrO2) has the striking ability to shift the selectivity towards methanol by increasing the rate of methanol conversion by two orders of magnitude compared to other supports, at a CO2 conversion of 1.4% and methanol selectivity of 55.4%. In situ X-ray Absorption Spectroscopy (XAS) and in situ X-ray Diffraction (XRD) indicate that under reaction conditions the catalyst is pure MoP in a partially crystalline phase. Results from Diffuse Reflectance Infrared Fourier Transform Spectroscopy coupled with Temperature Programmed Surface Reaction (DRIFTS-TPSR) point towards a highly reactive monodentate formate intermediate stabilized by the strong interaction of MoP and ZrO2. This study definitively shows that the presence of a MoP phase leads to methanol formation from CO2, regardless of support and that the formate intermediate on MoP governs methanol formation rate.

Zn-rich (GaN)1−x(ZnO)x: a biomedical friend?

The synthesis of (GaN)_1−x(ZnO)_x with the assistance of high-gravity using a green approach for the first time, with the application of delivering pCRISPR.

Nanostructured metal phosphides: from controllable synthesis to sustainable catalysis

Metal phosphides (MPs) with unique and desirable physicochemical properties provide promising potential in practical applications, such as the catalysis, gas/humidity sensor, environmental remediation, and energy storage fields, especially for transition metal phosphides (TMPs) and MPs consisting of group IIIA and IVA metal elements. Most studies, however, on the synthesis of MP nanomaterials still face intractable challenges, encompassing the need for a more thorough understanding of the growth mechanism, strategies for large-scale synthesis of targeted high-quality MPs, and practical achievement of functional applications. This review aims at providing a comprehensive update on the controllable synthetic strategies for MPs from various metal sources. Additionally, different passivation strategies for engineering the structural and electronic properties of MP nanostructures are scrutinized. Then, we showcase the implementable applications of MP-based materials in emerging sustainable catalytic fields including electrocatalysis, photocatalysis, mild thermocatalysis, and related hybrid systems. Finally, we offer a rational perspective on future opportunities and remaining challenges for the development of MPs in the materials science and sustainable catalysis fields.

Interfacial chemistry and electroactivity of black phosphorus decorated with transition metals

Black phosphorus (BP) exhibits a significant chemical reactivity toward transition metals at room temperature, forming metal–BP nanohybrids that have much higher catalytic activity in the hydrogen evolution reaction with respect to the bare BP.

Highly stable Mo-doped Fe2P and Fe3P monolayers as low-onset-potential electrocatalysts for nitrogen fixation

Mo atom doping can modify the electronic properties of Fe₂P and Fe₃P monolayers, and significantly enhance their NRR activities with onset potentials as low as −0.30 V and −0.17 V, respectively.

Topochemical synthesis of low-dimensional nanomaterials

Over the past several decades, nanomaterials have been extensively studied owing to having a series of unique physical and chemical properties that exceed those of conventional bulk materials. Researchers have developed a lot of strategies for the synthesis of low-dimensional nanomaterials. Among them, topochemical synthesis has attracted increasing attention because it can provide more new nanomaterials by improving and upgrading inexpensive and accessible nanomaterials. In this review, we summarize and analyze many existing topochemical synthesis methods, including selective etching, liquid phase reactions, high-temperature atmosphere reactions, electrochemically assisted methods, etc. The future direction of topochemical synthesis is also proposed.

An in situ phosphorization strategy towards doped Co2P scaffolded within echinus-like carbon for overall water splitting

Eco-environmental synthesis of non-expensive electrocatalysts such as transition-metal phosphides (TMPs) is critical to advancing renewable hydrogen fuel. TMP nanostructures prepared typically by introducing additional conventional phosphorus sources are suggested as promising durable and low-cost electrocatalysts. Herein, an eco-efficient guest/host precursor-based synthesis route is demonstrated to prepare doped Co₂P scaffolded within echinus-like carbon ((M_0.2Co_0.8)₂P@C, M = Fe and Ni) as electrocatalysts for overall water splitting. (Fe_0.2Co_0.8)₂P@C is derived by directly pyrolyzing a precursor of sodium dodecyl phosphate-intercalated CoFe-layered double hydroxide (CoFe-LDH), without introducing any additional phosphorus source. Electrocatalytic testing shows that (Fe_0.2Co_0.8)₂P@C requires overpotentials of 290 and 130 mV at a current density of 10 mA cm^-2 for oxygen and hydrogen evolution reactions (OER and HER) in an alkaline electrolyte, respectively. Furthermore, a different (Ni_0.2Co_0.8)₂P@C composite, obtained only by altering a NiCo-LDH host, exhibits better electrocatalytic activities than those of Fe-doped (Fe_0.2Co_0.8)₂P@C. In particular, the (No_0.2Co_0.8)₂P@C||(Ni_0.2Co_0.8)₂P@C electrolyzer affords a current density of 10 mA cm^-2 at a decent voltage of 1.62 V for overall water splitting. Electron energy-loss spectroscopy (EELS) observations show the oxyhydroxide layer formed on the surface, and density functional theory (DFT) calculations reveal that Fe-/Ni-doping lowers the Gibbs free energy barrier for the OER and the HER, both underpinning the enhancements.

Metal-Organic-Framework-Derived Co2 P Nanoparticle/Multi-Doped Porous Carbon as a Trifunctional Electrocatalyst

Developing efficient and low-cost replacements for precious metals as electrocatalysts active in electrochemical reactions-the oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and oxygen reduction reaction (ORR)-is a top priority in renewable energy technology. In this work a highly active and very stable trifunctional electrocatalyst composed of Co₂ P embedded in Co, N, and P multi-doped carbon has been synthesized using zeolitic imidazolate frameworks as precursors. The synergistic effects between Co₂ P and the multi-heteroatom-doped carbon substrates afford materials having electrocatalytic activities for HER, OER, and ORR, which are comparable-or even superior to-those of commercial RuO₂ or Pt/C catalysts. Density functional theory calculations show that Co₂ P has a higher density of states at the Fermi level than Co_n P (0 < n < 2), which promotes electron transfer and intermediates adsorption in the catalytic process. Zinc-air batteries and water splitting devices assembled using the materials as electrode electrocatalysts show good performance and outstanding stability. This work represents a breakthrough in improving the catalytic performance of non-precious metal electrocatalysts for OER, HER, and ORR, and opens new avenues for clean energy generation.