Understanding the Origin of Highly Selective CO2 Electroreduction to CO on Ni,N-doped Carbon Catalysts

Fluorine-Tuned Carbon-Based Nickel Single-Atom Catalysts for Scalable and Highly Efficient CO2 Electrocatalytic Reduction

Electrocatalytic CO2 reduction is garnering significant interest due to its potential applications in mitigating CO2 and producing fuel. However, the scaling up of related catalysis is still hindered by several challenges, including the cost of the catalytic materials, low selectivity, small current densities to maintain desirable selectivity. In this study, Fluorine (F) atoms were introduced into an N-doped carbon-supported single nickel (Ni) atom catalyst via facile polymer-assisted pyrolysis. This method not only maintains the high atom utilization efficiency of Ni in a cost-effective and sustainable manner but also effectively manipulates the electronic structure of the active Ni-N4 site through F doping. The catalyst has also been further optimized by controlling the F states, including convalent and semi-ionic states, by adjusting the fluorine sources involved. Consequently, this catalyst with unique structure exhibited comparable electrocatalytic performance for CO2-to-CO conversion, achieving a Faradaic efficiency (FE) of over 99% across a wide potential range and an exceptional CO evolution rate of 9.5 × 104 h-1 at -1.16 V vs reversible hydrogen electrode (RHE). It also delivered a practical current of 400 mA cm-2 while maintaining more than 95% CO FE. Experimental analysis combined with density functional theory (DFT) calculations have also shown that F-doping modifies the electron configuration at the central Ni-N4 sites. This modification lowers the energy barrier for CO2 activation, thereby facilitating the production of the crucial *COOH intermediate.

Potential-driven structural distortion in cobalt phthalocyanine for electrocatalytic CO2/CO reduction towards methanol

Cobalt phthalocyanine immobilized on carbon nanotube has demonstrated appreciable selectivity and activity for methanol synthesis in electrocatalytic CO2/CO reduction. However, discrepancies in methanol production selectivity and activity between CO2 and CO reduction have been observed, leading to inconclusive mechanisms for methanol production in this system. Here, we discover that the interaction between cobalt phthalocyanine molecules and defects on carbon nanotube substrate plays a key role in methanol production during CO2/CO electroreduction. Through detailed operando X-ray absorption and infrared spectroscopies, we find that upon application of cathodic potential, this interaction induces the transformation of the planar CoN4 center in cobalt phthalocyanine to an out-of-plane distorted configuration. Consequently, this potential induced structural change promotes the transformation of linearly bonded *CO at the CoN4 center to bridge *CO, thereby facilitating methanol production. Overall, these comprehensive mechanistic investigations and the outstanding performance (methanol partial current density over 150 mA cm-2) provide valuable insights in guiding the activity and selectivity of immobilized cobalt phthalocyanine for methanol production in CO2/CO reduction.

[2+1] Cycloadditions Modulate the Hydrophobicity of Ni-N4 Single-Atom Catalysts for Efficient CO2 Electroreduction

Microenvironment regulation of M-N4 single-atom catalysts (SACs) is a promising way to tune their catalytic properties toward the electrochemical CO2 reduction reaction. However, strategies that can effectively introduce functional groups around the M-N4 sites through strong covalent bonding and under mild reaction conditions are highly desired. Taking the hydrophilic Ni-N4 SAC as a representative, we report herein a [2+1] cycloaddition reaction between Ni-N4 and in situ generated difluorocarbene (F2C:), and enable the surface fluorocarbonation of Ni-N4, resulting in the formation of a super-hydrophobic Ni-N4-CF2 catalyst. Meanwhile, the mild reaction conditions allow Ni-N4-CF2 to inherit both the electronic and structural configuration of the Ni-N4 sites from Ni-N4. Enhanced electrochemical CO2-to-CO Faradaic efficiency above 98 % is achieved in a wide operating potential window from -0.7 V to -1.3 V over Ni-N4-CF2. In situ spectroelectrochemical studies reveal that a highly hydrophobic microenvironment formed by the -CF2- group repels asymmetric H-bonded water at the electrified interface, inhibiting the hydrogen evolution reaction and promoting CO production. This work highlights the advantages of [2+1] cycloaddition reactions on the covalent modification of N-doped carbon-supported catalysts.

Customizing pyridinic nitrogen coordination in Ni-N-C for electrocatalytic CO2reduction towards CO

Nickel anchored N-doped carbon electrocatalysts (Ni-N-C) are rapidly developed for the electrochemical reduction reaction of carbon dioxide (CO2RR). However, the high-performanced Ni-N-C analogues design for CO2RR remains bewilderment, for the reason lacking of definite guidance for its structure-activity relationship. Herein, the correlation between the proportion of nitrogen species derived from various nitrogen sources and the CO2RR activity of Ni-N-C is investigated. The x-ray photoelectron spectroscopy (XPS) spectrum combined with the CO2RR performance results show that pyridinic-N content has a positive correlation with CO2RR activity. Moreover, density functional theory (DFT) demonstrates that pyridinic-N coordinated Ni-N4sites offers optimized free energy and favorable selectivity towards CO2RR compared with pyrrolic-N. Accordingly, Ni-Na-C with highest pyridinic-N content (ammonia as nitrogen source) performs superior CO2RR activity, with the maximum carbon monoxide faradaic efficiency (FECO) of 99.8% at -0.88 V vs. RHE and the FECOsurpassing 95% within potential ranging of -0.88 to -1.38 V vs. RHE. The building of this parameter for CO2RR activity of Ni-N-C give instructive forecast for low-cost and highly active CO2RR electrocatalysts.

In situ/Operando Synchrotron Radiation Analytical Techniques for CO2/CO Reduction Reaction: From Atomic Scales to Mesoscales

Electrocatalytic carbon dioxide/carbon monoxide reduction reaction (CO(2)RR) has emerged as a prospective and appealing strategy to realize carbon neutrality for manufacturing sustainable chemical products. Developing highly active electrocatalysts and stable devices has been demonstrated as effective approach to enhance the conversion efficiency of CO(2)RR. In order to rationally design electrocatalysts and devices, a comprehensive understanding of the intrinsic structure evolution within catalysts and micro-environment change around electrode interface, particularly under operation conditions, is indispensable. Synchrotron radiation has been recognized as a versatile characterization platform, garnering widespread attention owing to its high brightness, elevated flux, excellent directivity, strong polarization and exceptional stability. This review systematically introduces the applications of synchrotron radiation technologies classified by radiation sources with varying wavelengths in CO(2)RR. By virtue of in situ/operando synchrotron radiationanalytical techniques, we also summarize relevant dynamic evolution processes from electronic structure, atomic configuration, molecular adsorption, crystal lattice and devices, spanning scales from the angstrom to the micrometer. The merits and limitations of diverse synchrotron characterization techniques are summarized, and their applicable scenarios in CO(2)RR are further presented. On the basis of the state-of-the-art fourth-generation synchrotron facilities, a perspective for further deeper understanding of the CO(2)RR process using synchrotron radiation analytical techniques is proposed.

Elevated temperature-driven coordinative reconstruction of an unsaturated single-Ni-atom structure with low valency on a polymer-derived matrix for the electrolytic oxygen evolution reaction

A high-temperature pyrolysis-controlled coordination reconstruction resulted in a single-Ni-atom structure with a Ni-Nx-C structural unit (x = N atom coordinated to Ni). Pyrolysis of Ni-phen@ZIF-8-RF at 700 °C resulted in NiNP-NC-700 with predominantly Ni nanoparticles. Upon elevating the pyrolysis temperature from 700 to 900 °C, a coordination reconstruction offers Ni-Nx atomic sites in NiSA-NC-900. A combined investigation with X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and soft X-ray L3-edge spectroscopy suggests the stabilization of low-valent Niδ+ (0 < δ < 2) in the Ni-N-C structural units. The oxygen evolution reaction (OER) is a key process during water splitting in fuel cells. However, OER is a thermodynamically uphill reaction with multi-step proton-coupled electron transfer and sluggish kinetics, due to which there is a need for a catalyst that can lower the OER overpotentials. The adsorption energy of a multi-step reaction on a single metal atom with coordination unsaturation tunes the adsorption of each oxygenated intermediate. The promising OER activity of the NiSA-NC-900/NF anode on nickel foam was followed by the overall water splitting (OWS) using using NiSA-NC-900/NF as anode and Pt coil as the cathodic counterpart, wherein a cell potential of 1.75 V at 10 mA cm-2 was achieved. The cell potential recorded with Pt(-)/(+)NiSA-NC-900/NF was much lower than that obtained for other cells, i.e., Pt(-)/NF and NF(-)/(+)NF, which enhances the potentials of low-valent NiSAs for insightful understanding of the OER. At a constant applied potential of 1.61 V (vs. RHE) for 12 h, an small increase in current for initial 0.6 h followed by a constant current depicts the fair stability of catalyst for 12 h. Our results offer an insightful angle into the OER with a coordinatively reconstructed single-Ni-atom structure at lower valency (<+2).

Acidic media enables oxygen-tolerant electrosynthesis of multicarbon products from simulated flue gas

Renewable electricity powered electrochemical CO2 reduction (CO2R) offers a valuable method to close the carbon cycle and reduce our overreliance on fossil fuels. However, high purity CO2 is usually required as feedstock, which potentially decreases the feasibility and economic viability of the process. Direct conversion of flue gas is an attractive option but is challenging due to the low CO2 concentration and the presence of O2 impurities. As a result, up to 99% of the applied current can be lost towards the undesired oxygen reduction reaction (ORR). Here, we show that acidic electrolyte can significantly suppress ORR on Cu, enabling generation of multicarbon products from simulated flue gas. Using a composite Cu and carbon supported single-atom Ni tandem electrocatalyst, we achieved a multicarbon Faradaic efficiency of 46.5% at 200 mA cm-2, which is ~20 times higher than bare Cu under alkaline conditions. We also demonstrate stable performance for 24 h with a multicarbon product full-cell energy efficiency of 14.6%. Strikingly, this result is comparable to previously reported acidic CO2R systems using pure CO2. Our findings demonstrate a potential pathway towards designing efficient electrolyzers for direct conversion of flue gas to value-added chemicals and fuels.

Lignin-derived carbon nanosheets boost electrochemical reductive amination of pyruvate to alanine

Efficient and sustainable amino acid synthesis is essential for industrial applications. Electrocatalytic reductive amination has emerged as a promising method, but challenges such as undesired side reactions and low efficiency persist. Herein, we demonstrated a lignin-derived catalyst for alanine synthesis. Carbon nanosheets (CNSs) were synthesized from lignin via a template-assisted method and doped with nitrogen and sulfur to boost reductive amination and suppress side reactions. The resulting N,S-co-doped carbon nanosheets (NS-CNSs) exhibited outstanding electrochemical performance. It achieved a maximum alanine Faradaic efficiency of 79.5%, and a yield exceeding 1,199 μmol h-1 cm-2 on NS-CNS, with a selectivity above 99.9%. NS-CNS showed excellent durability during long-term electrolysis. Kinetic studies including control experiments and theoretical calculations provided further insights into the reaction pathway. Moreover, NS-CNS catalysts demonstrated potential in upgrading real-world polylactic acid plastic waste, yielding value-added alanine with a selectivity over 75%.

Constructing asymmetric double-atomic sites for synergistic catalysis of electrochemical CO2 reduction

Elucidating the synergistic catalytic mechanism between multiple active centers is of great significance for heterogeneous catalysis; however, finding the corresponding experimental evidence remains challenging owing to the complexity of catalyst structures and interface environment. Here we construct an asymmetric TeN2-CuN3 double-atomic site catalyst, which is analyzed via full-range synchrotron pair distribution function. In electrochemical CO2 reduction, the catalyst features a synergistic mechanism with the double-atomic site activating two key molecules: operando spectroscopy confirms that the Te center activates CO2, and the Cu center helps to dissociate H2O. The experimental and theoretical results reveal that the TeN2-CuN3 could cooperatively lower the energy barriers for the rate-determining step, promoting proton transfer kinetics. Therefore, the TeN2-CuN3 displays a broad potential range with high CO selectivity, improved kinetics and good stability. This work presents synthesis and characterization strategies for double-atomic site catalysts, and experimentally unveils the underpinning mechanism of synergistic catalysis.

Tunable 1D and 2D Polyacrylonitrile Nanosheet Superstructures

Carbon superstructures are widely applied in energy and environment-related areas. Among them, the flower-like polyacrylonitrile (PAN)-derived carbon materials have shown great promise due to their high surface area, large pore volume, and improved mass transport. In this work, we report a versatile and straightforward method for synthesizing one-dimensional (1D) nanostructured fibers and two-dimensional (2D) nanostructured thin films based on flower-like PAN chemistry by taking advantage of the nucleation and growth behavior of PAN. The resulting nanofibers and thin films exhibited distinct morphologies with intersecting PAN nanosheets, which formed through rapid nucleation on existing PAN. We further constructed a variety of hierarchical PAN superstructures based on different templates, solvents, and concentrations. These PAN nanosheet superstructures can be readily converted to carbon superstructures. As a demonstration, the nanostructured thin film exhibited a contact angle of ∼180° after surface modification with fluoroalkyl monolayers, which is attributed to high surface roughness enabled by the nanosheet assemblies. This study offers a strategy for the synthesis of nanostructured carbon materials for various applications.

Dual-Site Metal Catalysts for Electrocatalytic CO2 Reduction Reaction

Electrocatalytic CO2 reduction reaction (CO2 RR) is a promising and green approach for reducing atmospheric CO2 concentration and achieving high-valued conversion of CO2 under the carbon-neutral policy. In CO2 RR, the dual-site metal catalysts (DSMCs) have received wide attention for their ingenious design strategies, abundant active sites, and excellent catalytic performance attributed to the synergistic effect between dual-site in terms of activity, selectivity and stability, which plays a key role in catalytic reactions. This review provides a systematic summary and detailed classification of DSMCs for CO2 RR, describes the mechanism of synergistic effects in catalytic reactions, and also introduces in situ characterization techniques commonly used in CO2 RR. Finally, the main challenges and prospects of dual-site metal catalysts and even multi-site catalysts for CO2 recycling are analyzed. It is believed that based on the understanding of bimetallic site catalysts and synergistic effects in CO2 RR, well-designed high-performance, low-cost electrocatalysts are promising for achieving CO2 conversion, electrochemical energy conversion and storage in the future.

Achieving Efficient CO2 Electrolysis to CO by Local Coordination Manipulation of Nickel Single-Atom Catalysts

Selective electroreduction of CO2 to C1 feed gas provides an attractive avenue to store intermittent renewable energy. However, most of the CO2-to-CO catalysts are designed from the perspective of structural reconstruction, and it is challenging to precisely design a meaningful confining microenvironment for active sites on the support. Herein, we report a local sulfur doping method to precisely tune the electronic structure of an isolated asymmetric nickel-nitrogen-sulfur motif (Ni1-NSC). Our Ni1-NSC catalyst presents >99% faradaic efficiency for CO2-to-CO under a high current density of -320 mA cm-2. In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy and differential electrochemical mass spectrometry indicated that the asymmetric sites show a significantly weaker binding strength of *CO and a lower kinetic overpotential for CO2-to-CO. Further theoretical analysis revealed that the enhanced CO2 reduction reaction performance of Ni1-NSC was mainly due to the effectively decreased intermediate activation energy.

Tracking the Evolution of Single-Atom Catalysts for the CO2 Electrocatalytic Reduction Using Operando X-ray Absorption Spectroscopy and Machine Learning

Transition metal-nitrogen-doped carbons (TMNCs) are a promising class of catalysts for the CO2 electrochemical reduction reaction. In particular, high CO2-to-CO conversion activities and selectivities were demonstrated for Ni-based TMNCs. Nonetheless, open questions remain about the nature, stability, and evolution of the Ni active sites during the reaction. In this work, we address this issue by combining operando X-ray absorption spectroscopy with advanced data analysis. In particular, we show that the combination of unsupervised and supervised machine learning approaches is able to decipher the X-ray absorption near edge structure (XANES) of the TMNCs, disentangling the contributions of different metal sites coexisting in the working TMNC catalyst. Moreover, quantitative structural information about the local environment of active species, including their interaction with adsorbates, has been obtained, shedding light on the complex dynamic mechanism of the CO2 electroreduction.

Engineering iron carbide catalyst with aerophilic and electron-rich surface for improved electrochemical CO2 reduction

Highly efficient electrocatalyst for carbon dioxide reduction (CO₂RR) is desirable for converting CO₂ into carbon-based chemicals and reducing anthropogenic carbon emission. Regulating catalyst surface to improve the affinity for CO₂ and the capability of CO₂ activation is the key to high-efficiency CO₂RR. In this work, we develop an iron carbide catalyst encapsulated in nitrogenated carbon (SeN-Fe₃C) with an aerophilic and electron-rich surface by inducing preferential formation of pyridinic-N species and engineering more negatively charged Fe sites. The SeN-Fe₃C exhibits an excellent CO selectivity with a CO Faradaic efficiency (FE) of 92 % at -0.5 V (vs. RHE) and remarkably enhanced CO partial current density as compared to the N-Fe₃C catalyst. Our results demonstrate that Se doping reduces the Fe₃C particle size and improves the dispersion of Fe₃C on nitrogenated carbon. More importantly, the preferential formation of pyridinic-N species induced by Se doping endows the SeN-Fe₃C with an aerophilic surface and improves the affinity of the SeN-Fe₃C for CO₂. Density functional theory (DFT) calculations reveal that the electron-rich surface, which is caused by pyridinic N species and much more negatively charged Fe sites, leads to a high degree of polarization and activation of CO₂ molecule, thus conferring a remarkably improved CO₂RR activity on the SeN-Fe₃C catalyst.

Ethanol-Induced Ni2+ -Intercalated Cobalt Organic Frameworks on Vanadium Pentoxide for Synergistically Enhancing the Performance of 3D-Printed Micro-Supercapacitors

The synthesis of metal-organic framework (MOF) nanocomposites with high energy density and excellent mechanical strength is limited by the degree of lattice matching and crystal surface structure. In this study, dodecahedral ZIF-67 is synthesized uniformly on vanadium pentoxide nanowires. The influence of the coordination mode on the surface of ZIF-67 in ethanol is also investigated. Benefitting from the different coordination abilities of Ni²⁺ , Co²⁺ , and N atoms, spatially separated surface-active sites are created through metal-ion exchange. Furthermore, the incompatibility between the d⁸ electronic configuration of Ni²⁺ and the three-dimensional (3D) structure of ZIF-67 afforded the synthesis of hollow structures by controlling the amount of Ni doping. The formation of NiCo-MOF@CoOOH@V₂ O₅ nanocomposites is confirmed using X-ray absorption fine structure analysis. The high performance of the obtained composite is illustrated by fabricating a 3D-printed micro-supercapacitor, exhibiting a high area specific capacitance of 585 mF cm^-2 and energy density of 159.23 µWh cm^-2 (at power density = 0.34 mW cm^-2 ). The solvent/coordination tuning strategy demonstrated in this study provides a new direction for the synthesis of high-performance nanomaterials for electrochemical energy storage applications.

Geometric and Electronic Structural Engineering of Isolated Ni Single Atoms for a Highly Efficient CO2 Electroreduction

Tuning the coordination environment and geometric structures of single atom catalysts is an effective approach for regulating the reaction mechanism and maximize the catalytic efficiency of single-atom centers. Here, a template-based synthesis strategy is proposed for the synthesis of high-density NiN_x sites anchored on the surface of hierarchically porous nitrogen-doped carbon nanofibers (Ni-HPNCFs) with different coordination environments. First-principles calculations and advanced characterization techniques demonstrate that the single Ni atom is strongly coordinated with both pyrrolic and pyridinic N dopants, and that the predominant sites are stabilized by NiN₃ sites. This dual engineering strategy increases the number of active sites and utilization efficiency of each single atom as well as boosts the intrinsic activity of each active site on a single-atom scale. Notably, the Ni-HPNCF catalyst achieves a high CO Faradaic efficiency (FE_CO ) of 97% at a potential of -0.7 V, a high CO partial current density (j_CO ) of 49.6 mA cm^-2 (-1.0 V), and a remarkable turnover frequency of 24 900 h^-1 (-1.0 V) for CO₂ reduction reactions (CO₂ RR). Density functional theory calculations show that compared to pyridinic-type NiN_x , the pyrrolic-type NiN₃ moieties display a superior CO₂ RR activity over hydrogen evolution reactions, resulting in their superior catalytic activity and selectivity.

Computational Modelling of Pyrrolic MN4 Motifs Embedded in Graphene for Catalyst Design

Carbon-based materials doped with metal and nitrogen (M-N-Cs) have promising potential in electrocatalytic applications with the advantage of material sustainability. MN4 motifs incorporated into a carbon lattice are generally known to be responsible for the activity of these materials. While many computational studies assume the tetrapyridinic MN4 motifs, recent studies have elucidated the role of tetrapyrrolic MN4 motifs in electrocatalysis. Using density functional theory, we constructed and compared various structural models to study the incorporation of tetrapyrrolic and tetrapyridinic MN4 motifs in 2D carbon materials and analyzed the type of interactions between each metal species and the N4 site. We further quantified the relative affinity of various metal species to the two types of N4 site. Upon analysis of energies, bond lengths, electronic population and charges, we found that metals that exhibit highly ionic binding characters have a greater affinity towards tetrapyrrolic MN4 motifs compared to species that participate in covalent interactions with the π-system. Furthermore, the binding strength of each species in the N4 site depend on the electronegativity as well as the availability of orbitals for accepting electrons from the π-system.

Ni Nanoclusters Anchored on Ni-N-C Sites for CO2 Electroreduction at High Current Densities

Transition metal catalyst-based electrocatalytic CO₂ reduction is a highly attractive approach to fulfill the renewable energy storage and a negative carbon cycle. However, it remains a great challenge for the earth-abundant VIII transition metal catalysts to achieve highly selective, active, and stable CO₂ electroreduction. Herein, bamboo-like carbon nanotubes that anchor both Ni nanoclusters and atomically dispersed Ni-N-C sites (NiNCNT) are developed for exclusive CO₂ conversion to CO at stable industry-relevant current densities. Through optimization of gas-liquid-catalyst interphases via hydrophobic modulation, NiNCNT exhibits as high as Faradaic efficiency (FE) of 99.3% for CO formation at a current density of -300 mA·cm^-2 (-0.35 V vs reversible hydrogen electrode (RHE)), and even an extremely high CO partial current density (j_CO) of -457 mA·cm^-2 corresponding to a CO FE of 91.4% at -0.48 V vs RHE. Such superior CO₂ electroreduction performance is ascribed to the enhanced electron transfer and local electron density of Ni 3d orbitals upon incorporation of Ni nanoclusters, which facilitates the formation of the COOH* intermediate.

Oxygen-Bridged Indium-Nickel Atomic Pair as Dual-Metal Active Sites Enabling Synergistic Electrocatalytic CO2 Reduction

Single-atom catalysts offer a promising pathway for electrochemical CO₂ conversion. However, it is still a challenge to optimize the electrochemical performance of dual-atom catalysts. Here, an atomic indium-nickel dual-sites catalyst bridged by an axial oxygen atom (O-In-N₆ -Ni moiety) was anchored on nitrogenated carbon (InNi DS/NC). InNi DS/NC exhibits superior CO selectivity with Faradaic efficiency higher than 90 % over a wide potential range from -0.5 to -0.8 V versus reversible hydrogen electrode (vs. RHE). Moreover, an industrial CO partial current density up to 317.2 mA cm^-2 is achieved at -1.0 V vs. RHE in a flow cell. In situ ATR-SEIRAS combined with theory calculations reveal that the synergistic effect of In-Ni dual-sites and O atom bridge not only reduces the reaction barrier for the formation of *COOH, but also retards the undesired hydrogen evolution reaction. This work provides a feasible strategy to construct dual-site catalysts towards energy conversion.

N, S Co-Coordinated Zinc Single-Atom Catalysts for N-Alkylation of Aromatic Amines with Alcohols: The Role of S-Doping in the Reaction

S-doping emerged as a promising approach to further improve the catalytic performance of carbon-based materials for organic synthesis. Herein, a facile and gram-scale strategy was developed using zeolitic imidazole frameworks (ZIFs) as a precursor for the fabrication of the ZIF-derived N, S co-doped carbon-supported zinc single-atom catalyst (CNS@Zn₁-AA) via the pyrolysis of S-doped ZIF-8, which was modified by aniline, ammonia and thiourea and prepared by one-pot ball milling at room temperature. This catalyst, in which Zn is dispersed as the single atom, displays superior activity in N-alkylation via the hydrogen-borrowing strategy (120 °C, turnover frequency (TOF) up to 8.4 h^-1). S-doping significantly enhanced the catalytic activity of CNS@Zn₁-AA, as it increased the specific surface area and defects of this material and simultaneously increased the electron density of Zn sites in this catalyst. Furthermore, this catalyst had excellent stability and recyclability, and no obvious loss in activity after eight runs.

Enhancing CO2 Electroreduction Selectivity toward Multicarbon Products via Tuning the Local H2O/CO2 Molar Ratio

Mass transfer plays an important role in controlling the surface coverage of reactants and the kinetics of surface reactions, thus significantly adjusting the catalytic performance. Herein, we reported that H₂O diffusion was modulated by controlling the thicknesses of the carbon black (CB) layer between the gas diffusion electrode (GDE) of Cu and the electrolyte. As a consequence, the product distribution over the GDE of Cu was effectively regulated during CO₂ electroreduction. Interestingly, a volcano-type relationship between the thickness of the CB layer and the faradaic efficiency (FE) for multicarbon (C₂₊) products was observed over the GDE of Cu. Especially, when the applied total current density was set as 800 mA cm^-2, the FE for the C₂₊ products over the GDE of Cu coated by a CB layer with a thickness of 6.6 μm reached 63.2%, which was 2.8 times higher than that (16.8%) over the GDE of Cu without a CB layer.

Covalent Organic Framework (COF) Derived Ni‐N‐C Catalysts for Electrochemical CO 2 Reduction: Unraveling Fundamental Kinetic and Structural Parameters of the Active Sites

Electrochemical CO₂ reduction is a potential approach to convert CO₂ into valuable chemicals using electricity as feedstock. Abundant and affordable catalyst materials are needed to upscale this process in a sustainable manner. Nickel‐nitrogen‐doped carbon (Ni‐N‐C) is an efficient catalyst for CO₂ reduction to CO, and the single‐site Ni−N_x motif is believed to be the active site. However, critical metrics for its catalytic activity, such as active site density and intrinsic turnover frequency, so far lack systematic discussion. In this work, we prepared a set of covalent organic framework (COF)‐derived Ni‐N‐C catalysts, for which the Ni−N_x content could be adjusted by the pyrolysis temperature. The combination of high‐angle annular dark‐field scanning transmission electron microscopy and extended X‐ray absorption fine structure evidenced the presence of Ni single‐sites, and quantitative X‐ray photoemission addressed the relation between active site density and turnover frequency.

Single-Atom Fe Catalysts for Fenton-Like Reactions: Roles of Different N Species

Recognizing and controlling the structure-activity relationships of single-atom catalysts (SACs) is vital for manipulating their catalytic properties for various practical applications. Herein, Fe SACs supported on nitrogen-doped carbon (SA-Fe/CN) are reported, which show high catalytic reactivity (97% degradation of bisphenol A in only 5 min), high stability (80% of reactivity maintained after five runs), and wide pH suitability (working pH range 3-11) toward Fenton-like reactions. The roles of different N species in these reactions are further explored, both experimentally and theoretically. It is discovered that graphitic N is an adsorptive site for the target molecule, pyrrolic N coordinates with Fe(III) and plays a dominant role in the reaction, and pyridinic N, coordinated with Fe(II), is only a minor contributor to the reactivity of SA-Fe/CN. Density functional theory (DFT) calculations reveal that a lower d-band center location of pyrrolic-type Fe sites leads to the easy generation of Fe-oxo intermediates, and thus, excellent catalytic properties.

Adjusting Local CO Confinement in Porous-Shell Ag@Cu Catalysts for Enhancing C-C Coupling toward CO2 Eletroreduction

Tuning the local confinement of reaction intermediates is of pivotal significance to promote C-C coupling for enhancing the selectivity for multicarbon (C₂₊) products toward CO₂ electroreduction. Herein, we have gained insights into the confinement effect of local CO concentration for enhanced C-C coupling over core-shell Ag@Cu catalysts by tuning the pore diameters within porous Cu shells. During CO₂ electroreduction, the core-shell Ag@Cu catalysts with an average pore diameter of 4.9 nm within the Cu shells (Ag@Cu-p4.9) exhibited the highest Faradaic efficiency of 73.7% for C₂₊ products at 300 mA cm^-2 among the three Ag@Cu catalysts. Finite-element-method simulations revealed that the pores with a diameter of 4.9 nm in Cu conspicuously enhanced the local CO concentration. On the basis of in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy measurements, Ag@Cu-p4.9 exhibited the highest surface coverage of adsorbed CO intermediates with a linear adsorption configuration due to the confinement effect, thus facilitating C-C coupling.

Nitrogen-Doped Carbon Flowers with Fe and Ni Dual Metal Centers for Effective Electroreduction of Oxygen

Carbon-based nanocomposites have been attracting extensive attention as high-performance catalysts in alkaline media towards the electrochemical reduction of oxygen. Herein, polyacrylonitrile nanoflowers are synthesized via a free-radical polymerization route and used as a structural scaffold and precursor, whereby controlled pyrolysis leads to the ready preparation of carbon nanocomposites (FeNi-NCF) doped with both metal (Fe and Ni) and nonmetal (N) elements. Transmission electron microscopy studies show that the FeNi-NCF composites retain the flower-like morphology, with the metal species atomically dispersed into the flaky carbon petals. Remarkably, despite a similar structure, elemental composition, and total metal content, the FeNi-NCF sample with a high Fe:Ni ratio exhibits an electrocatalytic performance towards oxygen reduction reaction (ORR) in alkaline media that is similar to that by commercial Pt/C, likely due to the Ni to Fe electron transfer that promotes the adsorption and eventual reduction of oxygen, as evidenced in X-ray photoelectron spectroscopic measurements. Results from this study underline the importance of the electronic properties of metal dopants in the manipulation of the ORR activity of carbon nanocomposites.

Atomic Tuning of Single-Atom Fe-N-C Catalysts with Phosphorus for Robust Electrochemical CO2 Reduction

The electrochemical reduction of CO₂ to produce carbon-based fuels and chemicals possesses huge potentials to alleviate current environmental problems. However, it is confronted by great challenges in the design of active electrocatalysts with low overpotentials and high product selectivity. Here we report the atomic tuning of a single-Fe-atom catalyst with phosphorus (Fe-N/P-C) on commercial carbon black as a robust electrocatalyst for CO₂ reduction. The Fe-N/P-C catalyst exhibits impressive performance in the electrochemical reduction of CO₂ to CO, with a high Faradaic efficiency of 98% and a high mass-normalized turnover frequency of 508.8 h^-1 at a low overpotential of 0.34 V. On the basis of ex-situ X-ray absorption spectroscopy measurements and DFT calculations, we reveal that the tuning of P in single-Fe-atom catalysts reduces the oxidation state of the Fe center and decreases the free-energy barrier of *CO intermediate formation, consequently maintaining the electrocatalytic activity and stability of single-Fe-atom catalysts.

NiCo Alloy Nanoparticles on a N/C Dual-Doped Matrix as a Cathode Catalyst for Improved Microbial Fuel Cell Performance

The cathode material properties of the microbial fuel cell (MFC) have a quite important effect on their power generation capacity. Excellent oxygen reduction reaction (ORR) performance is the key to obtaining the remarkable capability of MFC. In this study, a series of catalysts are successfully prepared by a simple step-by-step hydrothermal, in situ growth, solution polymerization, and pyrolysis procedure. Here, the NiCo nanoparticles loading on nitrogen/carbon dual-doped matrix annealing at 800 °C (NiCo@DNC-800) under Ar shows good ORR activity with a maximum power density of 2325.60 ± 41.96 mW m^-2 in the case of the 2 mg cm^-2 minimal catalyst loading, and which is about 2.16 times more than that achieved by 20% Pt/C (1074.21 ± 39.36 mW m^-2 ). The unique N/C duel-doped matrix provides more graphitic-N and pyridinic-N that can reduce the resistance of electron diffusion and transport, together with the synergistic catalysis of NiCo active sites improving the oxygen reduction reaction performance of MFC greatly. In addition, the NiCo@DNC-800 cathode catalyst demonstrates that composite materials have great application potential in water pollution treatment and new green energy strategies.

Tuning the local electronic structure of a single-site Ni catalyst by co-doping a 3D graphene framework with B/N atoms toward enhanced CO2 electroreduction

Various single metal sites supported on N-doped carbon materials have been demonstrated to be effective catalysts for CO₂ electroreduction. However, it remains a challenging task to gain comprehensive understanding on how the local electronic structures of single metal catalytic sites are rationally tuned, which eventually holds the key to significantly enhance the electrocatalytic performance. Herein, we implement B-N bonds into an N-doped 3D graphene framework by B doping to further stabilize the supported catalytic Ni single-sites and simultaneously tune their local electronic structure. Moreover, electrochemical in situ Fourier-transform infrared spectroscopy reveals that the B-N bonds can further facilitate the production of pivotal *COOH intermediates in comparison with only N doping. As a result, the Ni single-site catalyst on the B, N co-doped 3D graphene framework achieves excellent catalytic performance with a CO faradaic efficiency (FE) of 98% and a turnover frequency (TOF) value of 20.1 s^-1 at -0.8 V (vs. RHE), whereas the FE and TOF for the control sample without B doping are as low as 62% and 6.0 s^-1, respectively. This work highlights the superiority of modulating local electronic structures of single-site catalysts toward efficient electrocatalytic CO₂ reduction.

The electrocatalytic performance of Ni–AlO(OH)3@RGO for the reduction of CO2 to CO

In the context of global carbon capping and carbon neutrality, electrochemical methods for converting CO2 to CO are among the most promising and valuable methods for harvesting greenhouse gas pollutants and producing renewable energy.

Electrochemical Reduction of CO2 to CO over Transition Metal/N-Doped Carbon Catalysts: The Active Sites and Reaction Mechanism

Electrochemical CO2 reduction to value-added chemicals/fuels provides a promising way to mitigate CO2 emission and alleviate energy shortage. CO2 -to-CO conversion involves only two-electron/proton transfer and thus is kinetically fast. Among the various developed CO2 -to-CO reduction electrocatalysts, transition metal/N-doped carbon (M-N-C) catalysts are attractive due to their low cost and high activity. In this work, recent progress on the development of M-N-C catalysts for electrochemical CO2 -to-CO conversion is reviewed in detail. The regulation of the active sites in M-N-C catalysts and their related adjustable electrocatalytic CO2 reduction performance is discussed. A visual performance comparison of M-N-C catalysts for CO2 reduction reaction (CO2 RR) reported over the recent years is given, which suggests that Ni and Fe-N-C catalysts are the most promising candidates for large-scale reduction of CO2 to produce CO. Finally, outlooks and challenges are proposed for future research of CO2 -to-CO conversion.

MOF-Templated Sulfurization of Atomically Dispersed Manganese Catalysts Facilitating Electroreduction of CO2 to CO

To reach a carbon-neutral future, electrochemical CO2 reduction reaction (eCO2RR) has proven to be a strong candidate for the next-generation energy system. Among potential materials, single-atom catalysts (SACs) serve as a model to study the mechanism behind the reduction of CO2 to CO, given their well-defined active metal centers and structural simplicity. Moreover, using metal-organic frameworks (MOFs) as supports to anchor and stabilize central metal atoms, the common concern, metal aggregation, for SACs can be addressed well. Furthermore, with their turnability and designability, MOF-derived SACs can also extend the scope of research on SACs for the eCO2RR. Herein, we synthesize sulfurized MOF-derived Mn SACs to study effects of the S dopant on the eCO2RR. Using complementary characterization techniques, the metal moiety of the sulfurized MOF-derived Mn SACs (MnSA/SNC) is identified as MnN3S1. Compared with its non-sulfur-modified counterpart (MnSA/NC), the MnSA/SNC provides uniformly superior activity to produce CO. Specifically, a nearly 30% enhancement of Faradaic efficiency (F.E.) in CO production is observed, and the highest F.E. of approximately 70% is identified at -0.45 V. Through operando spectroscopic characterization, the probing results reveal that the overall enhancement of CO production on the MnSA/SNC is possibly caused by the S atom in the local MnN3S1 moiety, as the sulfur atom may induce the formation of S-O bonding to stabilize the critical intermediate, *COOH, for CO2-to-CO. Our results provide novel design insights into the field of SACs for the eCO2RR.

Phosphorus Induced Electron Localization of Single Iron Sites for Boosted CO2 Electroreduction Reaction

Electrochemical reduction of carbon dioxide (CO₂ ) into chemicals and fuels has recently attracted much interest, but normally suffers from a high overpotential and low selectivity. In this work, single P atoms were introduced into a N-doped carbon supported single Fe atom catalyst (Fe-SAC/NPC) mainly in the form of P-C bonds for CO₂ electroreduction to CO in an aqueous solution. This catalyst exhibited a CO Faradaic efficiency of ≈97 % at a low overpotential of 320 mV, and a Tafel slope of only 59 mV dec^-1 , comparable to state-of-the-art gold catalysts. Experimental analysis combined with DFT calculations suggested that single P atom in high coordination shells (n≥3), in particular the third coordination shell of Fe center enhanced the electronic localization of Fe, which improved the stabilization of the key *COOH intermediate on Fe, leading to superior CO₂ electrochemical reduction performance at low overpotentials.