A Supported Bismuth Halide Perovskite Photocatalyst for Selective Aliphatic and Aromatic C-H Bond Activation

Single-crystal oxygen-rich bismuth oxybromide nanosheets with highly exposed defective {10-1} facets for the selective oxidation of toluene under blue LED irradiation

Reactive radicals are crucial for activating inert and low-polarity C(sp3)-H bonds for the fabrication of high value-added products. Herein, novel single-crystal oxygen-rich bismuth oxybromide nanosheets (Bi4O5Br2 SCNs) with more than 85 % {10-1} facets exposure and oxygen defects were synthesized via a facile solvothermal route. The Bi4O5Br2 SCNs demonstrated excellent photocatalytic performance in the selective oxidation of toluene under blue light. The yield of benzaldehyde was 1876.66 μmol g-1 h-1, with a selectivity of approximately 90 %. Compared to that of polycrystalline Bi4O5Br2 nanosheets (Bi4O5Br2 PCNs), the activity of Bi4O5Br2 SCNs exhibit a 21-fold increase. Experimental studies and density functional theory (DFT) calculations have demonstrated that the defect Bi4O5Br2 (10-1) facets exhibits exceptional adsorption properties for O2 molecules. In addition, the single-crystal structure in the presence of surface defects significantly increases the separation and transport of photogenerated carriers, resulting in the effective activation of adsorbed O2 into superoxide radicals (•O2-). Subsequently, the positively charged phenylmethyl H is readily linked to the negatively charged superoxide radical anion, thereby activating the CH bond. This study offers a fresh perspective and valuable insights into the development of efficient molecular oxygen-activated photocatalysts and their application in the selective catalytic conversion of aromatic C(sp3)-H bonds.

Quantum-confined bismuth iodide perovskite nanocrystals in mesoporous matrices

Bismuth iodide perovskite nanocrystals are considered a viable alternative to the Pb halide ones due to their reduced toxicity and increased stability. However, it is still challenging to fabricate nanocrystals with a small and controlled size, and their electronic properties are not well understood. Here, we propose the growth of Bi iodide perovskite nanocrystals using different mesoporous silica with ordered pores of controlled diameter as templates. We obtain a series of confined Cs3Bi2I9 and MA3Bi2I9 perovskites with diameters of 2.3, 3.7, 7.4, and 9.2 nm, and precise size control. The complex absorption spectra of the encapsulated perovskites cannot be properly fitted using classical Tauc or Elliott formalisms. By fitting the spectra with a modified Elliott formula, the bandgap values and exciton binding energies (70-400 meV) could be extracted. The calculated bandgaps scale with the pore sizes. Using a combined experimental and theoretical approach, we demonstrate for the first time quantum confinement in 0D Bi-iodide perovskite nanocrystals.

Photocatalytic toluene oxidation with nickel-mediated cascaded active units over Ni/Bi2WO6 monolayers

Adsorption and activation of C-H bonds by photocatalysts are crucial for the efficient conversion of C-H bonds to produce high-value chemicals. Nevertheless, the delivery of surface-active oxygen species for C-H bond oxygenation inevitably needs to overcome obstacles due to the separated active centers, which suppresses the catalytic efficiency. Herein, Ni dopants are introduced into a monolayer Bi2WO6 to create cascaded active units consisting of unsaturated W atoms and Bi/O frustrated Lewis pairs. Experimental characterizations and density functional theory calculations reveal that these special sites can establish an efficient and controllable C-H bond oxidation process. The activated oxygen species on unsaturated W are readily transferred to the Bi/O sites for C-H bond oxygenation. The catalyst with a Ni mass fraction of 1.8% exhibits excellent toluene conversion rates and high selectivity towards benzaldehyde. This study presents a fascinating strategy for toluene oxidation through the design of efficient cascaded active units.

Lead-free Cs2AgBiBr6 double perovskite microcrystals for effective visible-light photocatalytic thio/selenocyanation

Lead-free perovskite microcrystals (MCs) have been regarded as promising potential photocatalysts, owing to their high molar extinction coefficient, low economic cost, adjustable light absorption range, and ample surface-active sites. Herein, C-3 thio/selenocyanation of indoles is demonstrated in high selectivity and yield by using lead-free double perovskite Cs2AgBiBr6 MCs under visible light irradiation. Moreover, the photocatalyst can be recycled at least 5 times without a significant decrease in catalytic activity.

Halogen-Site Regulation in Cs3Bi2X9 Quantum Dots for Efficient and Selective Oxidation of Benzyl Alcohol Driven by Solar Light

Sluggish charge kinetics and low selectivity limit the solar-driven selective organic transformations under mild conditions. Herein, an efficient strategy of halogen-site regulation, based on the precise control of charge transfer and molecule activation by rational design of Cs3Bi2X9 quantum dots photocatalysts, is proposed to achieve both high selectivity and yield of benzyl-alcohol oxidation. In situ PL spectroscopy study reveals that the Bi─Br bonds formed in the form of Br-associated coordination can enhance the separation and transfer of photoexcited carriers during the practical reaction. As the active center, the exclusive Bi─Br covalence can benefit the benzyl-alcohol activation for producing carbon-centered radicals. As a result, the Cs3Bi2Br9 with this atomic coordination achieves a conversion ratio of 97.9% for benzyl alcohol and selectivity of 99.6% for aldehydes, which are 56.9- and 1.54-fold higher than that of Cs3Bi2Cl9. Combined with quasi-in situ EPR, in situ ATR-FTIR spectra, and DFT calculation, the conversion of C6H5-CH2OH to C6H5-CH2* at Br-related coordination is revealed to be a determining step, which can be accelerated via halogen-site regulation for enhancing selectivity and photocatalytic efficiency. The mechanistic insights of this research elucidate how halogen-site regulation in favor of charge transfer and molecule activation toward efficient and selective oxidation of benzyl alcohol.

Heterogeneous Photocatalytic Strategies for C(sp3 )-H Activation

Activation of ubiquitous C(sp3 )-H bonds is extremely attractive but remains a great challenge. Heterogeneous photocatalysis offers a promising and sustainable approach for C(sp3 )-H activation and has been fast developing in the past decade. This Minireview focuses on mechanism and strategies for heterogeneous photocatalytic C(sp3 )-H activation. After introducing mechanistic insights, heterogeneous photocatalytic strategies for C(sp3 )-H activation including precise design of active sites, regulation of reactive radical species, improving charge separation and reactor innovations are discussed. In addition, recent advances in C(sp3 )-H activation of hydrocarbons, alcohols, ethers, amines and amides by heterogeneous photocatalysis are summarized. Lastly, challenges and opportunities are outlined to encourage more efforts for the development of this exciting and promising field.

Promoting the formation of metal-carboxylate coordination to modulate the dimensionality of ultrastable lead halide hybrids

Crystal engineering of metal halide hybrids is critical to investigate their structure-property relationship and advance their photophysical applications, but there have been limited efforts to employ coordination chemistry to precisely control the dimensionality of metal halide sublattices. Herein, we present a coordination-assembly synthetic strategy developed for the rational modulation of lead halide dimensionality, realizing the transition from 2D to 3D architectures. This manipulation is achieved by utilizing three organocarboxylates featuring the identical cyclohexane backbone unit. Specifically, the 1,4-cyclohexanedicarboxylate and 1,2,4,5-cyclohexanetetracarboxylate ligands facilitate the formation of quasi-2D layered structures, characterized by weakly corrugated and strongly corrugated lead halide layers, respectively. Importantly, the introduction of the 1,2,3,4,5,6-cyclohexanehexacarboxylate ligand results in coordination architectures featuring 3D lead chloride/bromide sublattices. The formation of the 3D coordination architectures templated by the 1,2,3,4,5,6-cyclohexanehexacarboxylate ligand affords extended wavelength coverage and superior carrier transport properties compared to their quasi-2D layered analogues. Importantly, both the 2D and 3D lead halide-based coordination polymers exhibit high aqueous stability over a wide pH range, outperforming the conventional ionic-bound lead halides. Notably, the chemically stable 3D lead bromide exhibits efficient photocatalytic ethylbenzene oxidation with the conversion rate of 498 μmol g-1 h-1, substantially higher than its 2D lead bromide counterparts. This work highlights the important role of coordination chemistry in the rational design of metal halide hybrids, which is crucial for advancing their photophysical properties and applications.

ZIF-8@CsPbBr3 Nanocrystals Formed by Conversion of Pb to CsPbBr3 in Bimetallic MOFs for Enhanced Photocatalytic CO2 Reduction

Perovskite nanocrystals are embedded into metal-organic frameworks (MOFs) to create composites with high light absorption coefficients, tunable electronic properties, high specific surface area, and metal atom tunability for enhanced photocatalytic carban dioxide (CO2 ) reduction. However, existing perovskite-MOF structures with a large particle size are achieved based on Pb source adsorption into the pores of MOFs, which can significantly break down the porous structure, thereby resulting in a decreased specific surface area and impacting CO2 adsorption. Herein, a novel perovskite-MOF structure based on the synthesis of bimetallic Pb-containing MOFs and post-processing to convert Pb to CsPbBr3 nanocrystals (NCs) is proposed. It is discovered that the additional Pb is not introduced by adsorption, but instead engages in coordination and generates Pb-N. The produced ZIF-8@CsPbBr3 NCs are ≈40 nm and have an ultra-high specific surface area of 1325.08 m2 g-1 , and excellent photovoltaic characteristics, which are beneficial for photocatalytic CO2 reduction. The electronic conversion rate of composites is 450 mol g-1 h-1 , which is more than three times that of pure perovskites. Additionally, the superior reduction capacity is sustained after undergoing four cycles. Density Functional Thoery (DFT) simulations are used to explore the 3D charge density at the ZIF-8@CsPbBr3 NCs interface to better understand the electrical structure.

Bismuth in Radical Chemistry and Catalysis

Whereas indications of radical reactivity in bismuth compounds can be traced back to the 19th century, the preparation and characterization of both transient and persistent bismuth-radical species has only been established in recent decades. These advancements led to the emergence of the field of bismuth radical chemistry, mirroring the progress seen for other main-group elements. The seminal and fundamental studies in this area have ultimately paved the way for the development of catalytic methodologies involving bismuth-radical intermediates, a promising approach that remains largely untapped in the broad landscape of synthetic organic chemistry. In this review, we delve into the milestones that eventually led to the present state-of-the-art in the field of radical bismuth chemistry. Our focus aims at outlining the intrinsic discoveries in fundamental inorganic/organometallic chemistry and contextualizing their practical applications in organic synthesis and catalysis.

New visible-light-driven Bi2MoO6/Cs3Sb2Br9 heterostructure for selective photocatalytic oxidation of toluene to benzaldehyde

Herein, new Bi2MoO6/Cs3Sb2Br9 heterostructure (BiMo/CSB) was investigated for the first time as a visible-light-driven photocatalyst for C(sp3)-H bond activation using molecular oxygen as a green oxidant and toluene as a model substrate. The optimized BiMo/CSB photocatalyst exhibited enhanced toluene oxidation activity (2,346 μmol g-1h-1), which was almost two- and five-fold that of pristine CSB (1,165 μmol g-1h-1) and BiMo (482 μmol g-1h-1), respectively. The improved photocatalytic performance was essentially attributed to the formation of staggered band energy lineup in the BiMo/CSB hybrid, which promoted S-scheme charge transfer across the BiMo/CSB heterointerface as supported by ultraviolet photoelectron spectroscopy (UPS), density functional theoretical (DFT), time-resolve photoluminescence (TRPL), and photoelectrochemical studies. Spin-trapping electron paramagnetic resonance (EPR) and radical scavenging studies revealed that photoinduced hole, molecular oxygen, and superoxide radical are key active species in this photocatalytic system. The developed BiMo/CSB catalyst provided good selectivity toward benzaldehyde product (94-98 %), presumably due to the inhibiting effect of benzyl alcohol on benzaldehyde oxidation. No significant change in structure and morphology was observed for the spent catalyst, however small negative shift of Sb 3d and Bi 4f binding energy was found suggesting partial reduction of Sb3+ and Bi3+. This work not only provides a new visible-light-driven photocatalyst for C(sp3)-H bond activation but also opens the doors for exploitation of the conversion and functionalization of this inert bond toward the production of high value-added organic chemicals.

Structural Modification Strategies, Interfacial Charge-Carrier Dynamics, and Solar Energy Conversion Applications of Organic-Inorganic Halide Perovskite Photocatalysts

Over the past few decades, organic-inorganic halide perovskites (OIHPs) as novel photocatalyst materials have attracted intensive attention for an impressive variety of photocatalytic applications due to their excellent photophysical (chemical) properties. Regarding practical application and future commercialization, the air-water stability and photocatalytic performance of OIHPs need to be further improved. Accordingly, studying modification strategies and interfacial interaction mechanisms is crucial. In this review, the current progress in the development and photocatalytic fundamentals of OIHPs is summarized. Furthermore, the structural modification strategies of OIHPs, including dimensionality control, heterojunction design, encapsulation techniques, and so on for the enhancement of charge-carrier transfer and the enlargement of long-term stability, are elucidated. Subsequently, the interfacial mechanisms and charge-carrier dynamics of OIHPs during the photocatalytic process are systematically specified and classified via diverse photophysical and electrochemical characterization methods, such as time-resolved photoluminescence measurements, ultrafast transient absorption spectroscopy, electrochemical impedance spectroscopy measurements, transient photocurrent densities, and so forth. Eventually, various photocatalytic applications of OIHPs, including hydrogen evolution, CO2 reduction, pollutant degradation, and photocatalytic conversion of organic matter.

Improving the stability of perovskite nanocrystals via SiO2 coating and their applications

Lead halide perovskite nanocrystals (LHP NCs) with outstanding optical properties have been regarded as promising alternatives to traditional phosphors for lighting and next-generation display technology. However, the practical applications of LHP NCs are seriously hindered by their poor stability upon exposure to moisture, oxygen, light, and heat. Hence, various strategies have been proposed to solve this issue. In this review, we have focused our attention on improving the stability of LHP NCs via SiO2 coating because it has the advantages of simple operation, less toxicity, and easy repetition. SiO2 coating is classified into four types: (a) in situ hydrolytic coating, (b) mesoporous silica loading, (c) mediated anchoring, and (d) double coating. The potential applications of SiO2-coated LHP NCs in the field of optoelectronics, biology, and catalysis are presented to elucidate the reliability and availability of SiO2 coating. Finally, the future development and challenges in the preparation of SiO2-coated LHP NCs are analyzed in order to promote the commercialization process of LHP NC-related commodities.

Photocatalysis Based on Metal Halide Perovskites for Organic Chemical Transformations

Heterogeneous photocatalysts incorporating metal halide perovskites (MHPs) have garnered significant attention due to their remarkable attributes: strong visible-light absorption, tuneable band energy levels, rapid charge transfer, and defect tolerance. Additionally, the promising optical and electronic properties of MHP nanocrystals can be harnessed for photocatalytic applications through controlled crystal structure engineering, involving composition tuning via metal ion and halide ion variations, dimensional tuning, and surface chemistry modifications. Combination of perovskites with other materials can improve the photoinduced charge separation and charge transfer, building heterostructures with different band alignments, such as type-II, Z-scheme, and Schottky heterojunctions, which can fine-tune redox potentials of the perovskite for photocatalytic organic reactions. This review delves into the activation of organic molecules through charge and energy transfer mechanisms. The review further investigates the impact of crystal engineering on photocatalytic activity, spanning a diverse array of organic transformations, such as C-X bond formation (X = C, N, and O), [2 + 2] and [4 + 2] cycloadditions, substrate isomerization, and asymmetric catalysis. This study provides insights to propel the advancement of metal halide perovskite-based photocatalysts, thereby fostering innovation in organic chemical transformations.

Rational Atom Substitution to Obtain Efficient, Lead-Free Photocatalytic Perovskites Assisted by Machine Learning and DFT Calculations

Inorganic lead-free halide perovskites, devoid of toxic or rare elements, have garnered considerable attention as photocatalysts for pollution control, CO2 reduction and hydrogen production. In the extensive perovskite design space, factors like substitution or doping level profoundly impact their performance. To address this complexity, a synergistic combination of machine learning models and theoretical calculations were used to efficiently screen substitution elements that enhanced the photoactivity of substituted Cs2 AgBiBr6 perovskites. Machine learning models determined the importance of d10 orbitals, highlighting how substituent electron configuration affects electronic structure of Cs2 AgBiBr6 . Conspicuously, d10 -configured Zn2+ boosted the photoactivity of Cs2 AgBiBr6 . Experimental verification validated these model results, revealing a 13-fold increase in photocatalytic toluene conversion compared to the unsubstituted counterpart. This enhancement resulted from the small charge carrier effective mass, as well as the creation of shallow trap states, shifting the conduction band minimum, introducing electron-deficient Br, and altering the distance between the B-site cations d band centre and the halide anions p band centre, a parameter tuneable through d10 configuration substituents. This study exemplifies the application of computational modelling in photocatalyst design and elucidating structure-property relationships. It underscores the potential of synergistic integration of calculations, modelling, and experimental analysis across various applications.

Utilizing the Undesirable Oxidation of Lead-Free Hybrid Halide Perovskite Nanosheets for Solar-Driven Photocatalytic C(sp3)─H Activation: Unraveling the Serendipity

Hybrid halide perovskites (HHPs), whose every branch generates intrusiveness, have been utilized in solar cells from a broader perspective. However, the inclusiveness of employing HHP as a photocatalyst is in its initial stage. This study mainly focuses on the unexpected utilization of, so far, undesirable material vacancy-ordered MA2SnBr6 quantum dots synthesized from MASnBr3 nanosheets. Here, the quantum confinement grounded a large blue shift in ultraviolet (UV) and photoluminescence (PL) spectra with a Stokes shift of 420 meV, where the band gap increase is observed as size decreases in MA2SnBr6. Remarkably, MA2SnBr6 exhibits air and moisture stability, better charge transfer, and high oxidation potential compared to MASnBr3. The first-principles-based atomistic computations reveal the strain relaxation in the Sn-Br framework that structurally stabilizes the MA2SnBr6 lattice. Furthermore, the direct band gap and strongly localized valence band edge give rise to a new potential photocatalyst MA2SnBr6 for efficient solar-driven C(sp3)─H activation of cyclohexane and toluene under ambient conditions.

High-efficiency visible-light-driven oxidation of primary C-H bonds in toluene over a CsPbBr3 perovskite supported by hierarchical TiO2 nanoflakes

Photocatalytic oxidation of toluene to valuable fine chemicals is of great significance, yet faces challenges in the development of advanced catalysts with both high activity and selectivity for the activation of inert C(sp3)-H bonds. Halide perovskites with remarkable optoelectronic properties have shown to be prospective photoactive materials, but the bulky structure with a small surface area and severe recombination of photogenerated electron-hole pairs are obstacles to application. Here, we fabricate a hierarchical nanoflower-shaped CsPbBr3/TiO2 heterojunction by assembling CsPbBr3 nanoparticles on 2D TiO2 nanoflake subunits. The design significantly downsizes the size of CsPbBr3 from micrometers to nanometers, and forms a type II heterojunction with intimate interfacial contact between CsPbBr3 and TiO2 nanoflakes, thereby accelerating the separation and transfer of photogenerated charges. Moreover, the formed hierarchical heterojunction increaseslight absorption by refraction and scattering, offers a large surface area and enhances the adsorption of toluene molecules. Consequently, the optimized CsPbBr3/TiO2 exhibits a high performance (10 200 μmol g-1 h-1) for photocatalytic toluene oxidation with high selectivity (85%) for benzaldehyde generation under visible light. The photoactivity is about 20 times higher than that of blank CsPbBr3, and is among the best photocatalytic performances reported for selective oxidation of toluene under visible light irradiation.

Synthesis of Layered Lead-Free Perovskite Nanocrystals with Precise Size and Shape Control and Their Photocatalytic Activity

Halide perovskites have attracted enormous attention due to their potential applications in optoelectronics and photocatalysis. However, concerns over their instability, toxicity, and unsatisfactory efficiency have necessitated the development of lead-free all-inorganic halide perovskites. A major challenge in designing efficient halide perovskites for practical applications is the lack of effective methods for producing nanocrystals with precise size and shape control. In this work, a layered perovskite, Cs4ZnSb2Cl12 (CZS), is found from calculations to exhibit size- and facet-dependent optoelectronic properties in the nanoscale, and thus, a colloidal method is used to synthesize the CZS nanoparticles with size-tunable morphologies: zero- (nanodots), one- (nanowires and nanorods), two- (nanoplates), and three-dimensional (nanopolyhedra). The growth kinetics of the CZS nanostructures, along with the effects of surface ligands, reaction temperature, and time were investigated. The optoelectronic properties of the nanocrystals varied with size due to quantum confinement effects and with shape due to anisotropy within the crystals and the exposure of specific facets. These properties could be modulated to enhance the visible-light photocatalytic performance for toluene oxidation. In particular, the 9.7 nm CZS nanoplates displayed a toluene to benzaldehyde conversion rate of 1893 μmol g-1 h-1 (95% selectivity), 500 times higher than the bulk synthesized CZS, and comparable with the reported photocatalysts. This study demonstrates the integration of theoretical calculations and synthesis, revealing an approach to the design and fabrication of novel, high-performance colloidal perovskite nanocrystals for optoelectronic and photocatalytic applications.

Efficient and Selective Oxygenation of Cycloalkanes and Alkyl Aromatics with Oxygen through Synergistic Catalysis of Bimetallic Active Centers in Two-Dimensional Metal-Organic Frameworks Based on Metalloporphyrins

Confined catalytic realms and synergistic catalysis sites were constructed using bimetallic active centers in two-dimensional metal-organic frameworks (MOFs) to achieve highly selective oxygenation of cycloalkanes and alkyl aromatics with oxygen towards partly oxygenated products. Every necessary characterization was carried out for all the two-dimensional MOFs. The selective oxygenation of cycloalkanes and alkyl aromatics with oxygen was accomplished with exceptional catalytic performance using two-dimensional MOF Co-TCPPNi as a catalyst. Employing Co-TCPPNi as a catalyst, both the conversion and selectivity were improved for all the hydrocarbons investigated. Less disordered autoxidation at mild conditions, inhibited free-radical diffusion by confined catalytic realms, and synergistic C-H bond oxygenation catalyzed by second metal center Ni employing oxygenation intermediate R-OOH as oxidant were the factors for the satisfying result of Co-TCPPNi as a catalyst. When homogeneous metalloporphyrin T(4-COOCH3)PPCo was replaced by Co-TCPPNi, the conversion in cyclohexane oxygenation was enhanced from 4.4% to 5.6%, and the selectivity of partly oxygenated products increased from 85.4% to 92.9%. The synergistic catalytic mechanisms were studied using EPR research, and a catalysis model was obtained for the oxygenation of C-H bonds with O2. This research offered a novel and essential reference for both the efficient and selective oxygenation of C-H bonds and other key chemical reactions involving free radicals.

Critical Roles of Octahedron Bilayer Surface/Interior Bromide Defects in Photodynamics of Multi-Quantum-Well-Structured Cesium Bismuth Bromide

We investigate theoretically the roles of the intrinsic point defects in the photophysics of wide-bandgap multi-quantum-well-structured Cs₃Bi₂Br₉ based on the Shockley-Read-Hall statistics and multiphonon recombination theory. The GW plus Bethe-Salpeter equation calculation reveals that there is a prominent exciton peak below the interband absorption edge, and it clarifies the experimental debate. The most energetically favorable native defects possess deep thermodynamic transition levels. The bromide self-interstitials within the octahedron bilayers exhibit as efficient carrier trapping centers through the non-radiative multiphonon recombination, with a lifetime of 184 ns being on the same order of magnitude as the experimental value. The octahedron bilayer surface bromide self-interstitials account for the experimentally observed dominant blue luminescence in Cs₃Bi₂Br₉. These results reveal that the intrinsic point defects at different sites of the multi-quantum-well-like octahedron bilayers play different roles in the photodynamics of such unique layer-structured semiconductors.

The Dark Side of Lead-Free Metal Halide Nanocrystals: Substituent-Modulated Photocatalytic Activity in Benzyl Bromide Reduction

We illustrate here the high photocatalytic activity of sustainable lead-free metal halide nanocrystals (NCs), namely, Cs₃Sb₂Br₉ NCs, in the reduction of p-substituted benzyl bromides in the absence of a cocatalyst. The electronic properties of the benzyl bromide substituents and the substrate affinity to the NC surface determine the selectivity in C-C homocoupling under visible light irradiation. This photocatalyst can be reused for at least three cycles and preserves its good performance with a turnover number of ca. 105,000.

Recent developments in lead-free bismuth-based halide perovskite nanomaterials for heterogeneous photocatalysis under visible light

Halide perovskite materials, especially lead-based perovskites, have been widely used for optoelectronic and catalytic applications. However, the high toxicity of the lead element is a major concern that directs the research work toward lead-free halide perovskites, which could utilize bismuth as a promising candidate. Until now, the replacement of lead by bismuth in perovskites has been well studied by designing bismuth-based halide perovskite (BHP) nanomaterials with versatile physical-chemical properties, which are emerging in various application fields, especially heterogeneous photocatalysis. In this mini-review, we present a brief overview of recent progress in BHP nanomaterials for photocatalysis under visible light. The synthesis and physical-chemical properties of BHP nanomaterials have been comprehensively summarized, including zero-dimensional, two-dimensional nanostructures and hetero-architectures. Later, we introduce the photocatalytic applications of these novel BHP nanomaterials with visible-light response, improved charge separation/transport and unique catalytic sites. Due to advanced nano-morphologies, a well-designed electronic structure and an engineered surface chemical micro-environment, BHP nanomaterials demonstrate enhanced photocatalytic performance for hydrogen generation, CO₂ reduction, organic synthesis and pollutant removal. Finally, the challenges and future research directions of BHP nanomaterials for photocatalysis are discussed.

Stabilization and Performance Enhancement Strategies for Halide Perovskite Photocatalysts

Solar-energy-powered photocatalytic fuel production and chemical synthesis are widely recognized as viable technological solutions for a sustainable energy future. However, the requirement of high-performance photocatalysts is a major bottleneck. Halide perovskites, a category of diversified semiconductor materials with suitable energy-band-enabled high-light-utilization efficiencies, exceptionally long charge-carrier-diffusion-length-facilitated charge transport, and readily tailorable compositional, structural, and morphological properties, have emerged as a new class of photocatalysts for efficient hydrogen evolution, CO₂ reduction, and various organic synthesis reactions. Despite the noticeable progress, the development of high-performance halide perovskite photocatalysts (HPPs) is still hindered by several key challenges: the strong ionic nature and high hydrolysis tendency induce instability and an unsatisfactory activity due to the need for a coactive component to realize redox processes. Herein, the recently developed advanced strategies to enhance the stability and photocatalytic activity of HPPs are comprehensively reviewed. The widely applicable stability enhancement strategies are first articulated, and the activity improvement strategies for fuel production and chemical synthesis are then explored. Finally, the challenges and future perspectives associated with the application of HPPs in efficient production of fuels and value-added chemicals are presented, indicating the irreplaceable role of the HPPs in the field of photocatalysis.

Precisely Tailoring Heterometallic Polyoxotitanium Clusters for the Efficient and Selective Photocatalytic Oxidation of Hydrocarbons

Photocatalysis is a promising yet challenging approach for the selective oxidation of hydrocarbons to valuable oxygenated chemicals with O₂ under mild conditions. In this work, we report an atomically precise material model to address this challenge. The key to our solution is the rational incorporation of Fe species into polyoxotitanium cluster to form a heterometallic Ti₄ Fe₁ cocrystal. This newly designed cocrystal cluster, which well governs the energy and charge transfer as evidenced by spectroscopic characterizations and theoretical calculations, enables the synergistic process involving C(sp³ )-H bond activation by photogenerated holes and further reactions by singlet oxygen (¹ O₂ ). Remarkably, the cocrystal Ti₄ Fe₁ cluster achieves efficient and selective oxidation of hydrocarbons (C₅ to C₁₆ ) into aldehydes and ketones with a conversion rate up to 12 860 μmol g^-1  h^-1 , 5 times higher than that of Fe-doped Ti₃ Fe₁ cluster. This work provides insights into photocatalyst design at atomic level enabling synergistic catalysis.

A Critical Review of the Use of Bismuth Halide Perovskites for CO2 Photoreduction: Stability Challenges and Strategies Implemented

Inspired by natural photosynthesis, the photocatalytic CO2 reduction reaction (CO2RR) stands as a viable strategy for the production of solar fuels to mitigate the high dependence on highly polluting fossil fuels, as well as to decrease the CO2 concentration in the atmosphere. The design of photocatalytic materials is crucial to ensure high efficiency of the CO2RR process. So far, perovskite materials have shown high efficiency and selectivity in CO2RR to generate different solar fuels. Particularly, bismuth halide perovskites have gained much attention due to their higher absorption coefficients, their more efficient charge transfer (compared to oxide perovskites), and their required thermodynamic potential for CO2RR. Moreover, these materials represent a promising alternative to the highly polluting lead halide perovskites. However, despite all the remarkable advantages of bismuth halide perovskites, their use has been limited, owing to instability concerns. As a consequence, recent reports have offered solutions to obtain structures highly stable against oxygen, water, and light, promoting the formation of solar fuels with promising efficiency for CO2RR. Thus, this review analyzes the current state of the art in this field, particularly studies about stability strategies from intrinsic and extrinsic standpoints. Lastly, we discuss the challenges and opportunities in designing stable bismuth halide perovskites, which open new opportunities for scaling up the CO2RR.

Recognition of Water-Induced Double-Edged Sword Effects in Photocatalytic Selective Oxidation of Toluene on Titanium Dioxide Clusters with Density Functional Theory Calculations

Recently, water promotion effects in the selective oxidation of benzyl alcohol to benzaldehyde have been experimentally recognized and identified. However, the effects of water on the photocatalytic selective oxidation of toluene into benzaldehyde remain elusive. In this work, the Ti₃O₉H₆ clusters in different solvents (water and toluene solvent) are used to study the water-induced effects in photocatalytic oxidation reactions in kinetics and thermodynamics using density functional theory (DFT) calculations. In addition, the influences of the OH groups on catalysts (Ti-OH bonds) from photocatalytic water splitting are also considered. The results clearly demonstrate the water-induced double-edged sword effects in the photocatalytic selective oxidation of toluene. We expect that our work can not only shed light on the mechanisms of photocatalytic selective oxidation of toluene into benzaldehyde and other activation reactions of sp³ C-H bonds but also design and modulate highly efficient photocatalysts.

Boosted Inner Surface Charge Transfer in Perovskite Nanodots@Mesoporous Titania Frameworks for Efficient and Selective Photocatalytic CO2 Reduction to Methane

Exploring high-efficiency and stable halide perovskite-based photocatalysts for the selective reduction of CO₂ to methane is a challenge because of the intrinsic photo- and chemical instability of halide perovskites. In this study, halide perovskites (Cs₃ Bi₂ Br₉ and Cs₂ AgBiBr₆ ) were grown in situ in mesoporous TiO₂ frameworks for an efficient CO₂ reduction. Benchmarked CH₄ production rates of 32.9 and 24.2 μmol g^-1  h^-1 with selectivities of 88.7 % and 84.2 %, were achieved, respectively, which are better than most reported halide perovskite photocatalysts. Focused ion-beam sliced-imaging techniques were used to directly image the hyperdispersed perovskite nanodots confined in mesopores with tunable sizes ranging from 3.8 to 9.9 nm. In situ X-ray photoelectronic spectroscopy and Kelvin probe force microscopy showed that the built-in electric field between the perovskite nanodots and mesoporous titania channels efficiently promoted photo-induced charge transfer. Density functional theory calculations indicate that the high methane selectivity was attributed to the Bi-adsorption-mediated hydrogenation of *CO to *HCO that dominates CO desorption.

Dissolved Organic Matter Acting as a Microbial Photosensitizer Drives Photoelectrotrophic Denitrification

The biogeochemical fates of dissolved organic matter (DOM) show important environmental significance in aqueous ecosystems. However, the current understanding of the trophic relationship between DOM and microorganisms limits the ability of DOM to serve as a heterotrophic substrate or electron shuttle for microorganisms. In this work, we provide the first evidence of photoelectrophy, a new trophic linkage, that occurs between DOM and nonphototrophic microorganisms. Specifically, the photoelectrotrophic denitrification process was demonstrated in a Thiobacillus denitrificans-DOM coupled system, in which DOM acted as a microbial photosensitizer to drive the model denitrifier nitrate reduction. The reduction of nitrate followed a pseudo-first-order reaction with a kinetic constant of 0.06 ± 0.003 h^-1, and the dominant nitrogenous product was nitrogen. The significant upregulated (p < 0.01) expression of denitrifying genes, including nar, nir, nor, and nos, supported that the conversion of nitrate to nitrogen was the microorganism-mediated process. Interestingly, the photoelectrophic process triggered by DOM photosensitization promotes humification of DOM itself, an almost opposite trend of pure DOM irradiation. The finding not only reveals a so far overlooked role of DOM serving as the microbial photosensitizer in sunlit aqueous ecosystems but also suggests a strategy for promoting sunlight-driven denitrification in surface environments.

Enhanced Catalytic Ozonation for Eliminating CH3SH via Stable and Circular Electronic Metal-Support Interactions of Si-O-Mn Bonds with Low Mn Loading

Catalytic ozonation of methyl mercaptan (CH₃SH) can effectively control this unbearable odorous sulfur-containing volatile organic compound (S-VOC). The construction of an electronic metal-support interaction (EMSI) coordination structure to maximize the number of active sites and increase the intrinsic activity of active sites is an effective means to improve catalytic performance. In this work, the abundant Si-OH groups on PSBA-15 (SBA-15 before calcination) were used to anchor Mn to form a Si-O-Mn-based EMSI coordination structure. Detailed characterizations and theoretical simulations reveal that the strong EMSI effect significantly adjusts and stabilizes the electronic structure of Mn 3d states, resulting in an electron-rich center on the Si-O-Mn bond to promote the specific adsorption/activation of ozone (O₃) and an electron-poor center on the (Si-O-)Mn-O bond to adsorb a large amount of CH₃SH accompanied by its own oxidative degradation. In situ Raman and in situ Fourier transform infrared (FTIR) analyses identify that catalytic ozonation over 3.0Mn-PSBA generates atomic oxygen species (AOS/*O) and reactive oxygen species (ROS/^•O₂^-) to achieve efficient decomposition of CH₃SH into CO₂/SO₄^2-. Furthermore, the electrons obtained from CH₃SH in electron-poor centers are transferred to maintain the redox cycle of Mn^2+/3+ → Mn⁴⁺ → Mn^2+/3+ through the internal bond bridge, thus accomplishing the efficient and stable degradation of CH₃SH prolonged to 180 min. Therefore, the rational design of catalysts with abundant active sites and optimized inherent activity via the EMSI effect can provide significant potential to improve catalytic performance and eliminate odorous gases.

Engineering Lattice Disorder on a Photocatalyst: Photochromic BiOBr Nanosheets Enhance Activation of Aromatic C-H Bonds via Water Oxidation

Solar-driven photocatalytic reactions can mildly activate hydrocarbon C-H bonds to produce value-added chemicals. However, the inefficient utilization of photogenerated carriers hinders the application. Here, we report reversible photochromic BiOBr (denoted as p-BiOBr) nanosheets that were colored by trapping photogenerated holes upon visible light irradiation and bleached by water oxidation to generate hydroxyl radicals, demonstrating enhanced carrier separation and water oxidation. The photocatalytic coupling and oxidation reactions of ethylbenzene were efficiently realized by p-BiOBr in a water-based medium under ambient temperature and pressure (apparent quantum yield is 14 times that of pristine BiOBr). The p-BiOBr nanosheets feature lattice disordered defects on the surface, providing rich uncoordinated catalytic sites and inducing structural distortions and lattice strain, which further leads to an altered band structure and significantly enhanced photocatalytic performances. These hole-trapping materials open up the possibility of substantially elevating the utilization efficiency of photogenerated holes for high-efficiency photocatalytic activation of various saturated C-H bonds.

Plasmonic-perovskite solar cells, light emitters, and sensors

The field of plasmonics explores the interaction between light and metallic micro/nanostructures and films. The collective oscillation of free electrons on metallic surfaces enables subwavelength optical confinement and enhanced light-matter interactions. In optoelectronics, perovskite materials are particularly attractive due to their excellent absorption, emission, and carrier transport properties, which lead to the improved performance of solar cells, light-emitting diodes (LEDs), lasers, photodetectors, and sensors. When perovskite materials are coupled with plasmonic structures, the device performance significantly improves owing to strong near-field and far-field optical enhancements, as well as the plasmoelectric effect. Here, we review recent theoretical and experimental works on plasmonic perovskite solar cells, light emitters, and sensors. The underlying physical mechanisms, design routes, device performances, and optimization strategies are summarized. This review also lays out challenges and future directions for the plasmonic perovskite research field toward next-generation optoelectronic technologies.

Realization of Oriented and Nanoporous Bismuth Chalcogenide Layers via Topochemical Heteroepitaxy for Flexible Gas Sensors

Most van der Waals two-dimensional (2D) materials without surface dangling bonds show limited surface activities except for their edge sites. Ultrathin Bi₂Se₃, a topological insulator that behaves metal-like under ambient conditions, has been overlooked on its surface activities. Herein, through a topochemical conversion process, ultrathin nanoporous Bi₂Se₃ layers were epitaxially deposited on BiOCl nanosheets with strong electronic coupling, leading to hybrid electronic states with further bandgap narrowing. Such oriented nanoporous Bi₂Se₃ layers possessed largely exposed active edge sites, along with improved surface roughness and film forming ability even on inkjet-printed flexible electrodes. Superior room-temperature NO₂ sensing performance was achieved compared to other 2D materials under bent conditions. Our work demonstrates that creating nanoscale features in 2D materials through topochemical heteroepitaxy is promising to achieve both favorable electronic properties and surface activity toward practical applications.

Developing sustainable, high-performance perovskites in photocatalysis: design strategies and applications

Solar energy is attractive because it is free, renewable, abundant and sustainable. Photocatalysis is one of the feasible routes to utilize solar energy for the degradation of pollutants and the production of fuel. Perovskites and their derivatives have received substantial attention in both photocatalytic wastewater treatment and energy production because of their highly tailorable structural and physicochemical properties. This review illustrates the basic principles of photocatalytic reactions and the application of these principles to the design of robust and sustainable perovskite photocatalysts. It details the structures of the perovskites and the physics and chemistry behind photocatalytic reactions and describes the advantages and limitations of popular strategies for the design of photoactive perovskites. This is followed by examples of how these strategies are applied to enhance the photocatalytic efficiency of oxide, halide and oxyhalide perovskites, with a focus on materials with potential for practical application, that is, not containing scarce or toxic elements. It is expected that this overview of the development of photocatalysts and deeper understanding of photocatalytic principles will accelerate the exploitation of efficient perovskite photocatalysts and bring about effective solutions to the energy and environmental crisis.

2D/2D Schottky heterojunction of in-situ growth FAPbBr3/Ti3C2 composites for enhancing photocatalytic CO2 reduction

Mimicking the natural photosynthesis process to convert carbon dioxide into value-added chemicals is vital to solving both the climate crisis worldwide and the depletion of fossil fuels. Herein, we explore the synthesis of 2D FAPbBr₃ nanoplate combined with 2D Ti₃C₂ nanosheet to form a 2D/2D FAPbBr₃/Ti₃C₂ Schottky heterojunction using facile hot-injection and in-situ growth approaches. The Schottky heterojunction of FAPbBr₃/Ti₃C₂ over large interfacial contact provides abundant channels for transferring photogenerated carriers from FAPbBr₃ nanoplate to Ti₃C₂ nanosheet. The experimental results showed a CO yield of 93.82 μmol·g^-1·h^-1 with ethyl acetate/deionization water as a sacrificial reagent for FAPbBr₃/Ti₃C₂ composite, which was 1.25-fold enhancement that on pristine FAPbBr₃ nanoplates. The large 2D heterointerface can efficiently accelerate the spatial separation and transfer of photogenerated carriers and result in the superior photocatalytic activity and favorable stability of FAPbBr₃/Ti₃C₂ photocatalysts, which are proved by in-situ X-ray photoelectron spectroscopy, photoluminescence, transient absorption spectra, and Mott-Schottky measurement. Thus, this work unveils that 2D/2D Schottky heterostructures would significantly improve the reaction activities of halide perovskite-based photocatalysts.

Nanomaterial catalysts for organic photoredox catalysis-mechanistic perspective

Solar energy conversions play a vital role in the renewable energy industry. In recent years, photoredox organic transformations have been explored as an alternative way to use solar energy. Catalysts for such photocatalytic systems have evolved from homogeneous metal complexes to heterogeneous nanomaterials over the past few decades. Herein, three important carrier transfer mechanisms are presented, including charge transfer, energy transfer and hot carrier transfer. Several models established by researchers to understand the catalytic reaction mechanisms are also illustrated, which promote the reaction system design based on theoretical studies. New strategies are introduced in order to enhance catalytic efficiency for future prospects.

Optical and Structural Property Tuning in Physical Vapor Deposited Bismuth Halides Cs3Bi2(I1-xBrx)9 (0 ≤ x ≤ 1)

Crystalline films of lead-free all-inorganic Cs3Bi2X9 (X = Br, I) perovskites have been deposited by radio frequency (RF)-magnetron sputtering providing high-quality, single-phase films as confirmed by structural, morphological, and optical property characterization. Progressive tuning of crystal structure characteristics and optical absorbance has been achieved in mixed Br/I phases Cs3Bi2(I1-xBrx)9 (0 ≤ x ≤ 1), highlighting a shift of the band gap from about 2.0 eV for Cs3Bi2I9 to 2.64 eV for Cs3Bi2Br9. X-ray diffraction and Raman scattering allowed defining the range of alloyed compositions where single-phase compositions are found. Finally, preliminary photocatalytic activity tests on the degradation of methylene blue provided solid data indicating the future possible exploitation of Bi-based perovskite derivative materials as active photocatalysts.

Metal Halide Perovskites for Solar Fuel Production and Photoreactions

Photocatalysis is an easily configurable and cost-effective technology for the conversion of solar energy into chemical energy. Recently, increasing attention has been given to metal halide perovskite (MHP) photocatalysts because of the development of stabilization strategies for MHPs under reaction conditions. From this perspective, we first describe several substantial breakthroughs in the photocatalytic application of MHPs. Performance trends in the solar fuel production applications of MHPs, including photocatalytic H₂ generation and photocatalytic CO₂ reduction reactions, are then described. Recent developments to extend the use of MHPs to various photocatalytic organic transformations are also highlighted. Finally, we propose several scientific challenges for the practical implications of MHPs for solar fuel production and various photoreactions.