Construction of 2D/2D ZnIn2S4/Nb2CTx (MXene) hybrid with hole transport highway and active facet exposure boost photocatalytic hydrogen evolution

In this study, leveraging the tunable surface groups of MXene, the two-dimensional (2D) Nb2CTx with OH terminal (NC) was synthesized. 2D ZnIn2S4 (ZIS) nanosheets were prepared with the aid of sodium citrate, enhancing the exposure ratio of active (110) facet. On this basis, 2D/2D ZnIn2S4/Nb2CTx heterojunctions were fabricated to improve photocatalytic hydrogen evolution reaction (HER) performance. The optimized 6 wt%Nb2CTx/ZnIn2S4-450 (6NC/ZIS-450) photocatalyt exhibits a remarkable HER rate of 3603 μmol g-1h-1, which is 10 times superior to that of the original ZnIn2S4. Its apparent quantum efficiency (AQE) at 380 nm reaches 14.9 %. Meanwhile, even after 5 rounds of HER, the activity of 2D/2D ZnIn2S4/Nb2CTx heterojunction remained at 90 %, far superior to that of pure ZnIn2S4 (34 % and 31 %). Energy band structure analysis and density functional theory (DFT) calculation indicate that Nb2CTx adsorbed with OH exhibit a low work function. By serving as a hole cocatalyst, it effectively boosts the photocatalytic HER rate of ZnIn2S4/Nb2CTx heterojunction and inhibits the photocorrosion of ZnIn2S4. This unique insight, via hole transport highways and increased exposure of active facets, effectively enhances the activity and stability of sulfides photocatalysts.

Full-Space Electric Field in Mo-Decorated Zn2In2S5 Polarization Photocatalyst for Oriented Charge Flow and Efficient Hydrogen Production

Integration of photocatalytic hydrogen (H2) evolution with oxidative organic synthesis presents a highly attractive strategy for the simultaneous production of clean H2 fuel and high-value chemicals. However, the sluggish dynamics of photogenerated charge carriers across the photocatalysts result in low photoconversion efficiency, hindering the wide applications of such a technology. Herein, this work overcomes this limitation by inducing the full-space electric field via charge polarization engineering on a Mo cluster-decorated Zn2In2S5 (Mo-Zn2In2S5) photocatalyst. Specifically, this full-space electric field arises from a cascade of the bulk electric field (BEF) and local surface electric field (LSEF), triggering the oriented migration of photogenerated electrons from [Zn-S] regions to [In-S] regions and eventually to Mo cluster sites, ensuring efficient separation of bulk and surface charge carriers. Moreover, the surface Mo clusters induce a tip enhancement effect to optimize charge transfer behavior by augmenting electrons and proton concentration around the active sites on the basal plane of Zn2In2S5. Notably, the optimized Mo1.5-Zn2In2S5 catalyst achieves exceptional H2 and benzaldehyde production rates of 34.35 and 45.31 mmol gcat -1 h-1, respectively, outperforming pristine ZnIn2S4 by 3.83- and 4.15-fold. These findings mark a significant stride in steering charge flow for enhanced photocatalytic performance.

Organic photoelectrochemical transistor based on cascaded DNA network structure modulated ZnIn2S4/MXene Schottky junction for sensitive ATP detection

Organic photoelectrochemical transistor (OPECT) biosensor is now appearing in perspective of public, which characterized by amplified the grating electrode potential by ion transport. In this study, the DNA network formed by the hybridization chain reaction (HCR) detects the target adenosine triphosphate (ATP) by adjusting the surface potential of the new heterojunction of ZnIn2S4/MXene. The formation of DNA network amplifies the detection signal of ATP. Significantly, OPECT biosensor could further amplify the signal, which calculated the gain achieved 103, which is consistent with the gain signal of the previously reported OPECT biosensor. Furthermore, the OPECT biosensor achieved a highly sensitivity detection of the target ATP, which the linear detection range is 0.03 pM-30 nM, and the detection limit is 0.03 pM, and illustrated a high selectivity to ATP. The proposed OPECT biosensor achieved signal amplification by adjusting the surface potential of ZnIn2S4/MXene through cascade DNA network, which provides a new direction for the detection of biomolecules.

A binary dumbbell visible light driven photocatalyst for simultaneous hydrogen production with the selective oxidation of benzyl alcohol to benzaldehyde

Photocatalytic H2 production with selective oxidation of organic moieties in an aqueous medium is a fascinating research area. However, the rational design of photocatalysts and their photocatalytic performance are still inadequate. In this work, we efficiently synthesized the MoS2 tipped CdS nanowires (NWs) photocatalyst using soft templates via the two-step hydrothermal method for efficient H2 production with selective oxidation of benzyl alcohol (BO) under visible light illumination. The optimized MoS2 tipped CdS NWs (20 % MoS2) photocatalyst exhibits the highest photocatalytic H2 production efficiency of 13.55 mmol g-1 h-1 with 99 % selective oxidation of BO, which was 42.34 and 2.21 times greater photocatalytic performance than that of pristine CdS NWs and MoS2/CdS NWs, respectively. The directional loading of MoS2 at the tips of CdS NWs (as compared to nondirectional MoS2 at CdS NWs) is the key factor towards superior H2 production with 99 % selective oxidation of BO and has an inhibitory effect on the photo corrosion of pristine CdS NWs. Therefore, the amazing enhancement in the photocatalytic performance and selectivity of optimized MoS2 tipped CdS NWs (20 % MoS2) photocatalyst is due to the spatial separation of their photoexcited charge carriers through the Schottky junction. Moreover, the unique structure of the MoS2 flower at the tip of 1D CdS NWs offers separate active sites for adsorption and surface reactions such as H2 production at the MoS2 flower (confirmed by Pt photo deposition) and subsequently the selective oxidation of BO at the stem of CdS NWs. This rational design of a photocatalyst could be an inspiring work for the further development of an efficient photocatalytic system for H2 production with selective oxidation of BO (a strategy of mashing two potatoes with one fork).

Recent progression in MXene-based catalysts for emerging photocatalytic applications of CO2 reduction and H2 production: A review

The development of advanced materials for efficient photocatalytic H2 production and CO2 reduction is highly recommended for addressing environmental issues and producing clean energy sources. Specifically, MXenes have emerged as two-dimensional (2D) materials extensively used as high-performance cocatalysts in photocatalyst systems owing to their outstanding features of structure and properties such as high conductivity, large specific surface area, and abundant active sites. Nevertheless, there is a lack of deep and systematic studies concerning the application of these emerging materials for CO2 reduction reaction (CRR) and H2 production (HER). This review first outlines the essential features of MXenes, encompassing the synthesis methods, composition, surface terminations, and electronic properties, which make them highly active as cocatalysts. It then examines the recent progress in MXene-based photocatalysts, emphasizing the synergy achieved by coupling MXenes as co-catalysts with semiconductors, utilizing MXenes as a support for the consistent growth of photocatalysts, leading to finely dispersed nanoparticles, and exploiting MXene as exceptional precursors for creating MXene/metal oxide photocomposite. The roles of engineering surface terminations of MXene cocatalysts, MXene quantum dots (QDs), and distinctive morphologies in MXenes-based photocatalyst systems to enhance photocatalytic activity for both HER and CRR have been explored both experimentally and theoretically using DFT calculations. Challenges and prospects for MXene-based photocatalysts are also addressed. Finally, suggestions for further research and development of effective and economical MXenes/semiconductors strategies are proposed. This comprehensive review article serves as a valuable reference for researchers for applying MXenes in photocatalysis.

Ultrafast and Parts-per-Billion-Level MEMS Gas Sensors by Hetero-Interface Engineering of 2D/2D Cu-TCPP@ZnIn2S4 with Enriched Surface Sulfur Vacancies

The primary challenge for resonant-gravimetric gas sensors is the synchronous improvement of the sensitivity and response time, which is restricted by low adsorption capacity and slow mass transfer in the sensing process and remains a great challenge. In this study, a novel 2D/2D Cu-TCPP@ZnIn2S4 composite is successfully constructed, in which Cu-TCPP MOF is used as a core substrate for the growth of 2D ultrathin ZnIn2S4 nanosheets with well-defined {0001} crystalline facets. The Cu-TCPP@ZnIn2S4 sensor exhibited high sensitivity (1.5 Hz@50 and 2.3 Hz@100 ppb), limit of detection (LOD: 50 ppb), and ultrafast (9 s @500 ppb) detection of triethylamine (TEA), which is the lowest LOD and the fastest sensor among the reported TEA sensors at room temperature, tackling the bottleneck for the ultrafast detection of the resonant-gravimetric sensor. These above results provide an innovative and easily achievable pathway for the synthesis of heterogeneous structure sensing materials.

Novel hollow core-shell Zn0.5Cd0.5S@ZnIn2S4/MoS2 nanocages with Z-scheme heterojunction for enhanced photocatalysis of hydrogen generation

The development of low-cost and efficient metal sulfide photocatalysts through morphological and structural design is vital to the advancement of the hydrogen economy. However, metal sulfide semiconductor photocatalysts still suffer from low carrier separation and poor solar-to-hydrogen conversion efficiencies. Herein, two-dimensional ZnIn2S4 nanosheets were grown on Zn0.5Cd0.5S hollow nanocages to construct Zn0.5Cd0.5S@ZnIn2S4 hollow nanocages for the first time. Novel hollow core-shell Zn0.5Cd0.5S@ZnIn2S4/MoS2 nanocages with Z-scheme heterojunction structures were obtained by incorporating MoS2 nanosheet co-catalyst via the solvothermal method. The resulting Zn0.5Cd0.5S@ZnIn2S4/MoS2 exhibited unique structural and compositional advantages, leading to remarkable photocatalytic hydrogen evolution rates of up to 8.5 mmol·h-1·g-1 without the use of any precious metal co-catalysts. This rate was 10.6-fold and 7.1-fold higher compared to pure ZnIn2S4 and Zn0.5Cd0.5S, respectively. Moreover, the optimized Zn0.5Cd0.5S@ZnIn2S4/MoS2 photocatalyst outperformed numerous reported ZnIn2S4-based photocatalysts and some ZnIn2S4-based photocatalysts based on precious metal co-catalysts. The exceptional photocatalytic performance of Zn0.5Cd0.5S@ZnIn2S4/MoS2 can be attributed to the Z-scheme heterojunction of core-shell structure that enhanced charge carrier separation and transport, as well as the co-catalytic action of MoS2. Overall, the proposed Zn0.5Cd0.5S@ZnIn2S4/MoS2 with heterojunction structure is a promising candidate for the preparation of efficient photocatalysts for solar-to-hydrogen energy conversion.

Construction of built-in correction photoelectrochemical sensing platform for diagnosis of Alzheimer's disease

The occurrence of Alzheimer's disease (AD) is strongly associated with the progressive aggregation of a 42-amino-acid fragment derived from the amyloid-β precursor protein (Aβ1-42). Therefore, it is crucial to establish a versatile platform that can effectively detect Aβ1-42 to aid in the early-stage preclinical diagnosis of AD. Herein, we introduce a specialized split-type analytical platform that enables sensitive and accurate monitoring of Aβ1-42 based on a self-corrected photoelectrochemical (PEC) sensing system. To realize this design, gelatinized Ti3C2@Bi2WO6 Schottky heterojunctions were prepared and served as photoelectrodes for tackling the photoinduced charge carriers. Functionalized CaCO3@CuO2 nanocomposites were used as signal converters to detect Aβ1-42 and amplify the signal further. Benefiting from the glucose oxidation induced acid microenvironment and H2O2 output, the nanocomposites are able to rapidly decompose, producing Ca2+ and Fenton-like catalyst Cu2+. The Cu2+-driven Fenton-like reaction generated ·OH, which accelerated the 3,3',5,5'-tetramethylbenzidine (TMB) oxidation. Additionally, Ca2+ was cross-linked with alginate inducing gelation on the surface of Ti3C2@Bi2WO6 Schottky heterojunctions, influencing mass transfer and light absorption. Eventually results in the shift of photocurrent, allowing for precise quantification with a detection limit of 0.06 pg mL-1. The combination of colorimetric variation and the photoelectric effect provide a more accurate and reliable result. This research opens up new possibilities for constructing PEC platforms and beyond.

Construction of MXene/Bi2WO6 Schottky Junction for Highly Efficient Piezocatalytic Hydrogen Evolution and Unraveling Mechanism

For the first time, a series of MXene (Ti3C2Tx)/Bi2WO6 Schottky junction piezocatalysts were constructed, and the piezocatalytic hydrogen evolution activity was explored. Optimal Ti3C2Tx/Bi2WO6 exhibits the highest piezocatalytic hydrogen evolution rate of 764.4 μmol g-1 h-1, which is nearly 8 times higher than that of pure Ti3C2Tx and twice as high as that of Bi2WO6. This value also surpasses that of most recently reported typical piezocatalysts. Moreover, related experimental results and density functional theory calculations reveal that Ti3C2Tx/Bi2WO6 can provide unique channels for efficient electron transfer, enhance piezoelectric properties, optimize the adsorption Gibbs free energy of water, reduce activation energy for hydrogen atoms, endow robust separation capacity of charge carrier, and restrict the electron-hole recombination rate, thus significantly promoting the efficiency of hydrogen evolution reaction. Ultimately, we have unraveled an innovative piezocatalytic mechanism. This work broadens the scope of MXene materials in a sustainable energy piezocatalysis application.

Schottky junction enhanced H2 evolution for graphitic carbon nitride-NiS composite photocatalysts

As one of the most promising photocatalysts for H2 evolution, graphitic carbon nitride (CN) has many appealing attributes. However, the activity of pristine CN remains unsatisfactory due to severe charge carrier recombination and lack of active sites. In this study, we report a two-step approach for the synthesis of CN nanotubes (TCN) loaded with NiS nanoparticles. The resulting composite photocatalysts gave a H2 evolution rate of 752.9 μmol g-1 h-1, which is 42.3 times higher compared to the pristine CN photocatalyst. Experimental and simulation results showed that the Schottky junction which was formed between TCN and NiS was key to achieving high activity. This is because the formation of Schottky junction prevented the backflow of electrons from NiS to TCN, which improved charge separation efficiency. More importantly, it also led to the accumulation of electrons on NiS, which significantly weakened the SH bond, such that the intermediate hydrogen species desorbed more easily from NiS surface to promote H2 evolution activity.

Visible-Light-Driven Selective Hydrogenation of Nitrostyrene over Layered Ternary Sulfide Nanostructures

Selective hydrogenation of nitrostyrenes is a great challenge due to the competitive activation of the nitro groups (─NO2 ) and carbon-carbon (C═C) double bonds. Photocatalysis has emerged as an alternative to thermocatalysis for the selective hydrogenation reaction, bypassing the precious metal costs and harsh conditions. Herein, two crystalline phases of layered ternary sulfide Cu2 WS4 , that is, body-centered tetragonal I-Cu2 WS4 nanosheets and primitive tetragonal P-Cu2 WS4 nanoflowers, are controlled synthesized by adjusting the capping agents. Remarkably, these nanostructures show visible-light-driven photocatalytic performance for selective hydrogenation of 3-nitrostyrene under mild conditions. In detail, the I-Cu2 WS4 nanosheets show excellent conversion of 3-nitrostyrene (99.9%) and high selectivity for 3-vinylaniline (98.7%) with the assistance of Na2 S as a hole scavenger. They also can achieve good hydrogenation selectivity to 3-ethylnitrobenzene (88.5%) with conversion as high as 96.3% by using N2 H4 as a proton source. Mechanism studies reveal that the photogenerated electrons and in situ generated protons from water participate in the former hydrogenation pathway, while the latter requires the photogenerated holes and in situ generated reactive oxygen species to activate the N2 H4 to form cis-N2 H2 for further reduction. The present work expands the rational synthesis of ternary sulfide nanostructures and their potential application for solar-energy-driven organic transformations.

Bioactive VS4-based sonosensitizer for robust chemodynamic, sonodynamic and osteogenic therapy of infected bone defects

BACKGROUND

Most bone defects caused by bone disease or trauma are accompanied by infection, and there is a high risk of infection spread and defect expansion. Traditional clinical treatment plans often fail due to issues like antibiotic resistance and non-union of bones. Therefore, the treatment of infected bone defects requires a strategy that simultaneously achieves high antibacterial efficiency and promotes bone regeneration.

RESULTS

In this study, an ultrasound responsive vanadium tetrasulfide-loaded MXene (VSM) Schottky junction is constructed for rapid methicillin-resistant staphylococcus aureus (MRSA) clearance and bone regeneration. Due to the peroxidase (POD)-like activity of VS4 and the abundant Schottky junctions, VSM has high electron-hole separation efficiency and a decreased band gap, exhibiting a strong chemodynamic and sonodynamic antibacterial efficiency of 94.03%. Under the stimulation of medical dose ultrasound, the steady release of vanadium element promotes the osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs). The in vivo application of VSM in infected tibial plateau bone defects of rats also has a great therapeutic effect, eliminating MRSA infection, then inhibiting inflammation and improving bone regeneration.

CONCLUSION

The present work successfully develops an ultrasound responsive VS4-based versatile sonosensitizer for robust effective antibacterial and osteogenic therapy of infected bone defects.

Fast Interfacial Carrier Dynamics Modulated by Bidirectional Charge Transport Channels in ZnIn2 S4 -based Composite Photoanodes Probed by Scanning Photoelectrochemical Microscopy

Limited charge separation/transport efficiency remains the primary obstacle of achieving satisfying photoelectrochemical (PEC) water splitting performance. Therefore, it is essential to develop diverse interfacial engineering strategies to mitigate charge recombination. Despite obvious progress having been made, most works only considered a single-side modulation in either the electrons of conduction band or the holes of valence band in a semiconductor photoanode, leading to a limited PEC performance enhancement. Beyond this conventional thinking, we developed a novel coupling modification strategy to achieve a composite electrode with bidirectional carrier transport for a better charge separation, in which Ti2 C3 Tx MXene quantum dots (MQDs) and α-Fe2 O3 nanodots (FO) are anchored on the surface of ZnIn2 S4 (ZIS) nanoplates, resulting in markedly improved PEC water splitting of pure ZIS photoanode. Systematic studies indicated that the bidirectional charge transfer pathways were stimulated due to MQDs as "electron extractor" and S-O bonds as carriers transport channels, which synergistically favors significantly enhanced charge separation. The enhanced kinetic behavior at the FO/MQDs/ZIS interfaces was systematically and quantitatively evaluated by a series of methods, especially scanning photoelectrochemical microscopy. This work may deepen our understanding of interfacial charge separation, and provide valuable guidance for the rational design and fabrication of high-performance composite electrodes.

In-situ grown carbon as charge transfer medium for enhanced photoinduced electrons extraction from polymer carbon nitride toward TiO2

Interfacial charge transfer resistance is one of the main limiting factors for realizing high photocatalytic efficiency of heterostructures system. Herein, an activated carbon layer is successfully introduced between the interface of polymer carbon nitride (CN) and TiO2 heterostructure (CNP-x) as charge transfer medium by in situ pyrolysis carbonization method. Because of the lower spatial resistance of the crystalline/amorphous interface and the fast carrier transportation character of activated carbon, the efficiency of TiO2 in extracting photoinduced electrons from CN was significantly improved. That is, the separation/transport of photocarriers in CNP-x heterostructure is accelerated, and the recombination time of photogenerated electrons and holes is prolonged. The CNP-1 exhibits a H2 evolution rate of 1298.5 μmol h-1 with apparent quantum yield (AQY) of 34.5 %, 20.3 % and 12.6 % at 365 nm, 380 nm and 400 nm, respectively. This work offers a novel and unique strategy to promote interface charge separation and transport of CN-based heterostructures by accurately introduction charge transfer medium.

Functional MXenes: Progress and Perspectives on Synthetic Strategies and Structure-Property Interplay for Next-Generation Technologies

MXenes are a class of 2D materials that include layered transition metal carbides, nitrides, and carbonitrides. Since their inception in 2011, they have garnered significant attention due to their diverse compositions, unique structures, and extraordinary properties, such as high specific surface areas and excellent electrical conductivity. This versatility has opened up immense potential in various fields, catalyzing a surge in MXene research and leading to note worthy advancements. This review offers an in-depth overview of the evolution of MXenes over the past 5 years, with an emphasis on synthetic strategies, structure-property relationships, and technological prospects. A classification scheme for MXene structures based on entropy is presented and an updated summary of the elemental constituents of the MXene family is provided, as documented in recent literature. Delving into the microscopic structure and synthesis routes, the intricate structure-property relationships are explored at the nano/micro level that dictate the macroscopic applications of MXenes. Through an extensive review of the latest representative works, the utilization of MXenes in energy, environmental, electronic, and biomedical fields is showcased, offering a glimpse into the current technological bottlenecks, such asstability, scalability, and device integration. Moreover, potential pathways for advancing MXenes toward next-generation technologies are highlighted.

In-situ formation of SrTiO3/Ti3C2 MXene Schottky heterojunction for efficient photocatalytic hydrogen evolution

Surface and interface engineering of composite photocatalysts are effective ways to enhance the dynamics of photo-generated charge carriers. In this work, SrTiO3/Ti3C2 MXene (STO/TC) Schottky heterojunction is constructed by in-situ growth of SrTiO3 (STO) on Ti3C2 MXene (TC) through Sr(OH)2 etching the surfaces of TC. This in-situ growth strategy not only creates the tight chemically bonded interfaces by SrTiO3 nanoparticles uniformly anchoring on the surface of two-dimensional Ti3C2 MXene nanosheets for promoting the photo-generated charge carrier separation, but also introduces surface Ti vacancies as the efficient catalytic active sites to accelerate the charge carrier transfer process for efficient hydrogen production. The photocatalytic system constructed by interface and surface engineering optimizes the photo-generated charge carrier dynamics and refines the photocatalytic hydrogen evolution performance (6.8 times higher than pristine SrTiO3) and stability. This work is expected to provide an alternative strategy to construct highly efficient photocatalysts with hydrogen evolution.

Boosting photothermal-assisted photocatalytic water/seawater splitting into hydrogen based on greenhouse-induced photothermal effect

Photothermal-assisted photocatalytic hydrogen production is a very promising way to maximize solar energy utilization to obtain clean energy. Herein, we designed a composite photocatalyst with coating core-shell Fe3O4@SiO2 nanoparticles on the surface of ZnIn2S4 micro-flowers for high-efficient photothermal-assisted photocatalytic water/seawater splitting. Experimental results reveal that in the core-shell structure of Fe3O4@SiO2, the addition of the SiO2 shell in Fe3O4@SiO2 not only separates the photothermal and photochemical components, avoiding competition between them, but also further increases the temperature of the core in a manner similar to the greenhouse effect, which was used as a hot core to provide heat to the ZnIn2S4 photocatalyst to increase the surface reaction temperature and enhance the collision chances of photo-generated carriers into causing severe recombination of carriers, thus promoting the hydrogen generation. Significantly, the optimal photocatalytic water/seawater splitting into hydrogen production rates over Fe3O4@SiO2/ZnIn2S4 are up to 1258.5 and 1108.5 μmol g-1 h-1, which are 11.9 and 14.7 times higher than that of pristine ZnIn2S4, respectively. This study provides an idea for the design of highly efficient photothermal-assisted photocatalysts.

Self-activated superhydrophilic green ZnIn2S4 realizing solar-driven overall water splitting: close-to-unity stability for a full daytime

Engineering an efficient semiconductor to sustainably produce green hydrogen via solar-driven water splitting is one of the cutting-edge strategies for carbon-neutral energy ecosystem. Herein, a superhydrophilic green hollow ZnIn2S4 (gZIS) was fabricated to realize unassisted photocatalytic overall water splitting. The hollow hierarchical framework benefits exposure of intrinsically active facets and activates inert basal planes. The superhydrophilic nature of gZIS promotes intense surface water molecule interactions. The presence of vacancies within gZIS facilitates photon energy utilization and charge transfer. Systematic theoretical computations signify the defect-induced charge redistribution of gZIS enhancing water activation and reducing surface kinetic barriers. Ultimately, the gZIS could drive photocatalytic pure water splitting by retaining close-to-unity stability for a full daytime reaction with performance comparable to other complex sulfide-based materials. This work reports a self-activated, single-component cocatalyst-free gZIS with great exploration value, potentially providing a state-of-the-art design and innovative aperture for efficient solar-driven hydrogen production to achieve carbon-neutrality.

Efficient photocatalytic hydrogen production by space separation of photo-generated charges from S-scheme ZnIn2S4/ZnO heterojunction

ZnIn2S4/ZnO heterostructures have been achieved by a simple in-situ growth solvothermal method. Under full spectrum irradiation, the optimal photocatalyst 2ZnIn2S4/ZnO exhibits H2 evolution rate of 13,638 (water/ethanol = 1:1) and 3036 (water) μmol·g-1h-1, which is respectively 4 and 5 times higher than that of pure ZnIn2S4. In situ illumination X-ray photoelectron spectroscopy (ISI-XPS) analysis and density functional theory (DFT) calculations show that the electrons of ZnIn2S4 are removed to ZnO through hybridization and form an internal electric field between ZnIn2S4 and ZnO. The optical properties of the catalyst and the effect of internal electric field (IEF) can increase photo-generated electrons (e-)-holes (h+) transport rate and enhance light collection, resulting in profitable photocatalytic properties. The photoelectrochemical and EPR results show that a stepped (S-scheme) heterojunction is formed in the ZnIn2S4/ZnO redox center, which greatly promotes separation of e--h+ pairs and efficient H2 evolution. This research offers an effective method for constructing an efficient S-Scheme photocatalytic system for H2 evolution.

Construction of novel photocatalysts for efficient hydrogen evolution: The key role of natural halloysite nanotubes

Hydrogen (H2) evolution by photocatalytic water splitting is a potential strategy to solve worldwide energy shortage. Sulfide nanocatalysts showed great potential for H2 evolution, but suffered from low charge separation efficiency and easy agglomeration. In this work, ZnIn2S4 (ZIS) nanoflowers were anchored onto the surface of halloysite nanotubes (HNTs) modified by ethylenediaminetetraacetic acid (EDTA). Photocatalyst 3ZnIn2S4-HNTs/EDTA3 (3ZIS-HNTs/E3) displayed the optimum H2 evolution rate of 10.4 mmol·g-1·h-1, being 3.4 times as that of the original ZIS. Moreover, 3ZIS-HNTs/E3 presented satisfied property in the photocatalytic hydrogenation reaction of 4-nitrophenol to produce 4-aminophenol. HNTs as substrates not only hindered the growth and agglomeration of ZIS, but also induced more S vacancies in ZIS. The production of Schottky junctions between ZIS and Pt, the high utilization of light energy in tubular HNTs, and the trapping effect of EDTA for photogenerated h+ were all favorable for enhancing the catalytic property. The density functional theory (DFT) calculations showed that 3ZIS-HNTs/E3 with more S vacancies had the lowest adsorption energy and the most appropriate ΔGH* for H* to enhance the H2 evolution efficiency, which was consistent with the experimental catalytic results. This study contributes a novel thought for synthesizing composites on the basis of natural minerals for taking part in and enhancing the catalytic performance.

Surface-Controlled CdS/Ti3 C2 MXene Schottky Junction for Highly Selective and Active Photocatalytic Dehydrogenation-Reductive Amination

Photocatalytic valorization and selective transformation of biomass-derived platform compounds offer great opportunities for efficient utilization of renewable resources under mild conditions. Here, the novel three-dimensional hierarchical flower-like CdS/Ti3 C2 Schottky junction (MCdS) composed of surface-controlled CdS and pretreated Ti3 C2 MXene is created for photocatalytic dehydrogenation-reductive amination of biomass-derived amino acid production under ambient temperature with unprecedented activity and selectivity. Schottky junction efficiently promotes photoexcited charge migration and separation and inhibits photogenerated electron-hole recombination, which results in a super-high activity. Meanwhile, CdS with the reduced surface energy supplies sufficient hydrogen sources for imine reduction and induces the preferential orientation of alanine, thus contributing superior selectivity. Moreover, a wide range of hydroxyl acids are successfully converted into corresponding amino acids and even one-pot conversion of glucose to alanine is easily achieved over MCdS. This work illustrates the mechanism of crystal orientation control and heterojunction construction in controlling catalytic behavior of photocatalytic nanoreactor, providing a paradigm for construction of MXene-based heterostructure.

Enhancing Photocatalytic Hydrogen Evolution by Synergistic Benefits of MXene Cocatalysis and Homo-Interface Engineering

Photocatalytic water splitting holds great promise as a sustainable and cost-effectiveness alternative for the production of hydrogen. Nevertheless, the practical implementation of this strategy is hindered by suboptimal visible light utilization and sluggish charge carrier dynamics, leading to low yield. MXene is a promising cocatalyst due to its high conductivity, abundance of active sites, tunable terminal functional groups, and great specific surface area. Homo-interface has perfect lattice matching and uniform composition, which are more conducive to photogenerated carriers' separation and migration. In this study, a novel ternary heterogeneous photocatalyst, a-TiO2 /H-TiO2 /Ti3 C2 MXene (MXTi), is presented using an electrostatic self-assembly method. Compared to commercial P25, pristine anatase, and rutile TiO2 , as-prepared MXTi exhibit exceptional photocatalytic hydrogen evolution performance, achieving a rate of 0.387 mmol h-1 . The significant improvement is attributable to the synergistic effect of homo-interface engineering and Ti3 C2 MXene, which leads to widened light absorption and efficient carrier transportation. The findings highlight the potential of interface engineering and MXene cocatalyst loading as a proactive approach to enhance the performance of photocatalytic water splitting, paving the way for more sustainable and efficient hydrogen production.

S-scheme heterojunction of hollow corncob-like ZnIn2S4/LaFeO3 for water splitting and tetracycline degradation

Reasonable design of heterojunction photocatalysts with high-quality interfacial coupling is an effective way to improve the photocatalytic activity of semiconductors. Herein, we successfully decorated Zinc indium sulfide (ZnIn2S4, ZIS) on perovskite Lanthanum ferrite (LaFeO3, LFO) with more active sites by a pre-hydrothermal combined post-calcination method, and constructed S-scheme heterojunction photocatalyst with a unique hollow corncob-like morphology for efficient photocatalytic hydrogen production and tetracycline (TC) degradation. When the mass ratio of LFO is 35% and 15%, the ZIS/LFO photocatalyst exhibits the best hydrogen evolution rate and TC photodegradation performance, respectively. Notably, the optimum hydrogen production rate is 6 times that of pure ZIS with excellent cycling stability. The enhanced photoactivity can be explained by the hollow corncob-like morphology and the formed S-scheme heterojunction with close interface contact between ZIS and LFO, which significantly improves the spatial separation and migration efficiency of photoexcited carriers, while maintaining a high redox potential. Finally, it provides an effective support for the photocatalytic mechanism through calculation results of density functional theory. This work not only provides a novel construction strategy of photocatalysts for efficient photocatalytic hydrogen evolution and organic pollutant degradation, but also opens up a new insight for perovskite-modified S-scheme heterojunction.

Realizing Unassisted Photo-Charging of Zinc-Air Batteries by Anisotropic Charge Separation in Photoelectrodes

Solar rechargeable zinc-air battery is a promising approach for capturing and storing intermittent solar energy through photoelectrochemical reactions. However, unassisted photo-charging of zinc-air batteries is challenging due to suboptimal carrier accumulation on photoelectrodes, resulting in sluggish reaction kinetics. Here, unassisted photo-charging of zinc-air battery is achieved by investigating anisotropic photogenerated charge separation on a series of representative semiconductors (ZnIn2 S4 , TiO2 , and In2 O3 ), among which the exceptional anisotropic charge separation on a ZnIn2 S4 photoelectrode is revealed based on anisotropic charge diffusion capabilities. The charge separation is facet-dependent, which is observed using Kelvin probe force microscopy, verifying a cause-and-effect relationship between the photo-charge accumulation on photoelectrodes and their photo-charging performance in zinc-air batteries. This work achieves an unassisted photo-charging current density of 1.9 mA cm-2 with a light-to-chemical energy conversion efficiency of 1.45%, highlighting the importance of anisotropic semiconductors for unassisted photo-charging of zinc-air batteries via efficient photogenerated charge separation.

Solar-Driven Production Of Hydrogen Peroxide And Benzaldehyde In Two-Phase System By An Interface-Engineered Co9 S8 -CoZnIn2 S4 Heterostructure

Coupling the photoproduction of solar fuel and value-added chemicals is highly attractive, as it maximizes the utilization of incident sunlight and the economic value of photocatalytic reactions. Constructing intimate semiconductor heterojunction for these reactions is highly desirable due to accelerated charge separation at the interfacial contact, but is challenged by material synthesis. Here, an active heterostructure bearing intimate interface, consisting of discrete Co9 S8 nanoparticles anchored on cobalt doped ZnIn2 S4 using a facile in situ one-step strategy, can drive photocatalytic co-production of H2 O2 and benzaldehyde from a two-phase water/benzyl alcohol system with spatial product separation is reported. The heterostructure yields a high production amount of 49.5 and 55.8 mmol L-1 for H2 O2 and benzaldehyde under visible-light soaking, respectively. The synchronous elemental Co doping and intimate heterostructure establishment substantially improve the overall reaction kinetics. Mechanism studies reveal that H2 O2 generated in the aqueous phase undergoes photodecomposition forming hydroxyl radical, which is subsequently transferred into the organic phase to oxidize benzyl alcohol into benzaldehyde. This study offers fertile guidelines for creating integrated semiconductors and broadens the avenue toward the coupled production of solar fuels and industrially important chemicals.

In Situ Growth of CdZnS Nanoparticles@Ti3C2Tx MXene Nanosheet Heterojunctions for Boosted Visible-Light-Driven Photocatalytic Hydrogen Evolution

Using natural light energy to convert water into hydrogen is of great significance to solving energy shortages and environmental pollution. Due to the rapid recombination of photogenerated carriers after separation, the efficiency of photocatalytic hydrogen production using photocatalysts is usually very low. Here, efficient CdZnS nanoparticles@Ti3C2Tx MXene nanosheet heterojunction photocatalysts have been successfully prepared by a facile in situ growth strategy. Since the CdZnS nanoparticles uniformly covered the Ti3C2Tx Mxene nanosheets, the agglomeration phenomenon of CdZnS nanoparticles could be effectively inhibited, accompanied by increased Schottky barrier sites and an enhanced migration rate of photogenerated carriers. The utilization efficiency of light energy can be improved by inhibiting the recombination of photogenerated electron-hole pairs. As a result, under the visible-light-driven photocatalytic experiments, this composite achieved a high hydrogen evolution rate of 47.1 mmol h-1 g-1, which is much higher than pristine CdZnS and Mxene. The boosted photocatalytic performances can be attributed to the formed heterojunction of CdZnS nanoparticles and Ti3C2Tx MXene nanosheets, as well as the weakened agglomeration effects.

In Situ Formation ZnIn2 S4 /Mo2 TiC2 Schottky Junction for Accelerating Photocatalytic Hydrogen Evolution Kinetics: Manipulation of Local Coordination and Electronic Structure

Regulating electronic structures of the active site by manipulating the local coordination is one of the advantageous means to improve photocatalytic hydrogen evolution (PHE) kinetics. Herein, the ZnIn₂ S₄ /Mo₂ TiC₂ Schottky junctions are designed to be constructed through the interfacial local coordination of In³⁺ with the electronegative O terminal group on Mo₂ TiC₂ based on the different work functions. Kelvin probe force microscopy and charge density difference reveal that an electronic unidirectional transport channel across the Schottky interface from ZnIn₂ S₄ to Mo₂ TiC₂ is established by the formed local nucleophilic/electrophilic region. The increased local electron density of Mo₂ TiC₂ inhibits the backflow of electrons, boosts the charge transfer and separation, and optimizes the hydrogen adsorption energy. Therefore, the ZnIn₂ S₄ /Mo₂ TiC₂ photocatalyst exhibits a superior PHE rate of 3.12 mmol g^-1 h^-1 under visible light, reaching 3.03 times that of the pristine ZnIn₂ S₄ . This work provides some insights and inspiration for preparing MXene-based Schottky catalysts to accelerate PHE kinetics.

Z-Scheme Modulated Charge Transfer on InVO4 @ZnIn2 S4 for Durable Overall Water Splitting

The charge transfer within heterojunction is crucial for the efficiency and stability of photocatalyst for overall water splitting (OWS). Herein, InVO₄ nanosheets have been employed as a support for the lateral epitaxial growth of ZnIn₂ S₄ nanosheets to produce hierarchical InVO₄ @ZnIn₂ S₄ (InVZ) heterojunctions. The distinct branching heterostructure facilitates active site exposure and mass transfer, further boosting the participation of ZnIn₂ S₄ and InVO₄ for proton reduction and water oxidation, respectively. The unique Z-scheme modulated charge transfer, visualized by simulation and in situ analysis, has been proved to promote the spatial separation of photoexcited charges and strengthen the anti-photocorrosion capability of InVZ. The optimized InVZ heterojunction presents improved OWS (153.3 µmol h^-1  g^-1 for H₂ and 76.9 µmol h^-1  g^-1 for O₂ ) and competitive H₂ production (21090 µmol h^-1  g^-1 ). Even after 20 times (100 h) of cycle experiment, it still holds more than 88% OWS activity and a complete structure.

Hydrophobicity Tailoring of Ferric Covalent Organic Framework/MXene Nanosheets for High-Efficiency Nitrogen Electroreduction to Ammonia

Electrocatalytic nitrogen reduction reaction (NRR) represents a promising sustainable approach for NH₃ synthesis. However, the poor NRR performance of electrocatalysts is a great challenge at this stage, mainly owing to their low activity and the competitive hydrogen evolution reaction (HER). Herein, 2D ferric covalent organic framework/MXene (COF-Fe/MXene) nanosheets with controllable hydrophobic behaviors are successfully prepared via a multiple-in-one synthetic strategy. The boosting hydrophobicity of COF-Fe/MXene can effectively repel water molecules to inhibit the HER for enhanced NRR performances. By virtue of the ultrathin nanostructure, well-defined single Fe sites, nitrogen enrichment effect, and high hydrophobicity, the 1H,1H,2H,2H-perfluorodecanethiol modified COF-Fe/MXene hybrid shows a NH₃ yield of 41.8 µg h^-1 mg_cat. ^-1 and a Faradaic efficiency of 43.1% at -0.5 V versus RHE in a 0.1 m Na₂ SO₄ water solution, which are vastly superior to the known Fe-based catalysts and even to the noble metal catalysts. This work provides a universal strategy to design and synthesis of non-precious metal electrocatalysts for high-efficiency N₂ reduction to NH₃ .

Recent Advances in Manganese-Based Materials for Electrolytic Water Splitting

Developing earth-abundant and highly effective electrocatalysts for electrocatalytic water splitting is a prerequisite for the upcoming hydrogen energy society. Recently, manganese-based materials have been one of the most promising candidates to replace noble metal catalysts due to their natural abundance, low cost, adjustable electronic properties, and excellent chemical stability. Although some achievements have been made in the past decades, their performance is still far lower than that of Pt. Therefore, further research is needed to improve the performance of manganese-based catalytic materials. In this review, we summarize the research progress on the application of manganese-based materials as catalysts for electrolytic water splitting. We first introduce the mechanism of electrocatalytic water decomposition using a manganese-based electrocatalyst. We then thoroughly discuss the optimization strategy used to enhance the catalytic activity of manganese-based electrocatalysts, including doping and defect engineering, interface engineering, and phase engineering. Finally, we present several future design opportunities for highly efficient manganese-based electrocatalysts.

Ta4C3-Modulated MOF-Derived 3D Crosslinking Network of VO2(B)@Ta4C3 for High-Performance Aqueous Zinc Ion Batteries

A two-dimensional MXene (Ta₄C₃) was innovatively used herein to modulate the space group and electronic properties of vanadium oxides, and the MXene/metal-organic framework (MOF) derivative VO₂(B)@Ta₄C₃ with 3D network cross-linking was prepared, which was then employed as a cathode to improve the performance of aqueous zinc ion batteries (ZIBs). A novel method combining HCl/LiF and hydrothermal treatments was used to etch Ta₄AlC₃ to obtain a large amount of accordion-like Ta₄C₃, and the V-MOF was then hydrothermally grown on the surface of the stripped Ta₄C₃ MXene. During the annealing process of V-MOF@Ta₄C₃, the addition of Ta₄C₃ MXene liberates the V-MOF from agglomerative stacking, allowing it to show additional active sites. More significantly, Ta₄C₃ prevents the V-MOF in the composite structure from converting into V₂O₅ of space group Pmmn but into VO₂(B) of space group C2/m after annealing. A considerable advantage of VO₂(B) for Zn²⁺ intercalation is provided by the negligible structural transformation during the intercalation process and the special tunnel transport channels, which have an enormous area (0.82 nm² along the b axis). According to first-principles calculations, there is a strong interfacial interaction between VO₂(B) and Ta₄C₃, which deliver remarkable electrochemical activity and kinetic performances for the storage of Zn²⁺. Therefore, the ZIBs prepared with the VO₂(B)@Ta₄C₃ cathode material exhibit an ultra-high capacity of 437 mA h·g^-1 at 0.1 A·g^-1 while showing good cycle performance and dynamic performance. This study will offer a fresh approach and a reference for creating metal oxide/MXene composite structures.

Crab Shell-Derived SnS2/C and FeS2/C Carbon Composites as Anodes for High-Performance Sodium-Ion Batteries

The demand for energy storage devices has increased significantly, and the sustainable development of lithium-ion batteries is limited by scarce lithium resources. Therefore, alternative sodium-ion batteries which are rich in resource may become more competitive in the future market. In this work, we synthesized low-cost SnS₂/C and FeS₂/C anode materials of sodium-ion batteries which used waste crab shells as biomass carbon precursor. The SnS₂ nanosheet and FeS₂ nanosphere structures are deposited on the crab shell-derived carbon through simple hydrothermal reaction. Due to the coexistence of transition metal dichalcogenides (TMDs) and crab-derived biomass carbon, the anode material has excellent cycle stability and rate performance. SnS₂/C and FeS₂/C deliver capacities of 535.4 and 479 mA h g^-1 at the current density of 0.1 A g^-1, respectively. This study explored an effective and economical strategy to use biomass and TMDs to construct high-performance sodium-ion batteries.

Nb, Se-codoped ZnIn2S4/NbSe2composites with enhanced catalytic activity and photodegradation performance towards tetracycline

Low quantum efficiency and serious photogenerated carrier recombination have been urgent bottleneck problems for photocatalytic materials. Herein, we prepared Nb, Se-codoped ZnIn₂S₄/NbSe₂composites through a facile solvothermal method. The synergetic effect of codoping and cocatalyst was investigated on the photodegradation performance towards tetracycline under visible-light irradiation. By adjusting the final composition, the comprehensive characterization revealed that the optimum degradation efficiency of NS/ZIS-1.6 catalyst arrived at 75% in 70 min, which was 5.8 times higher than that of pure ZnIn₂S₄. Deep analysis indicated that the enhanced photocatalytic performance could be attributed to higher light absorption, more efficient electron/hole separation, faster charge transport, and lower carrier recombination. This work may offer novel viewpoint for design of high-performance catalysts towards the visible-light-driven photodegradation system.

Constructing tightly integrated conductive metal-organic framework/covalent triazine framework heterostructure by coordination bonds for photocatalytic hydrogen evolution

The construction of tightly integrated heterostructures with metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) has been confirmed to be an effective way for improved hydrogen evolution. However, the reported tightly integrated MOF/COF hybrids were usually limited to the covalent connection of COFs with aldehyde groups and NH₂-MOF via Schiff base reaction, restricting the development of MOF/COF hybrids. Herein, a covalent triazine framework (CTF-1), a subtype of crystalline COFs, was integrated with a conductive two-dimensional (2D) MOF (Ni-CAT-1) by a novel coordinating connection mode for significantly enhanced visible-light-driven hydrogen evolution. The terminal amidine groups in the CTF-1 layers offer dual N sites for the coordination of metal ions, which provides the potential of coordinating connection between CTF-1 and Ni-CAT-1. The conductive 2D Ni-CAT-1 in Ni-CAT-1/CTF-1 hybrids effectively facilitates the separation of photogenerated carriers of CTF-1 component, and the resultant hybrid materials show significantly enhanced photocatalytic hydrogen evolution activity. In particular, the Ni-CAT-1/CTF-1 (1:19) sample exhibits the maximum hydrogen evolution rate of 8.03 mmol g^-1h^-1, which is about four times higher than that of the parent CTF-1 (1.96 mmol g^-1h^-1). The enhanced photocatalytic activity of Ni-CAT-1/CTF-1 is mainly attributed to the incorporation of conductive MOF which leads to the formation of a Z-Scheme heterostructure, promoting the electron transfer in hybrid materials. The coordinating combination mode of Ni-CAT-1 and CTF-1 in this work provides a novel strategy for constructing tightly integrated MOF/COF hybrid materials.

Squaraine dye/Ti3C2Tx MXene organic-inorganic hybrids for photocatalytic hydrogen evolution

MXenes, a new family of 2D nanostructured materials, have been widely studied in the field of artificial photosynthesis due to their outstanding physicochemical properties. In this work, a series of 2,4-bis[4-(N,N-dibutylamino)phenyl] squaraine (SQ) derivatives with different number of hydroxyl groups were hybridized with Ti₃C₂T_x MXene nanosheets, and the organic-inorganic hybrid photocatalysts were applied for water-splitting hydrogen evolution. The mass ratios of SQ@Ti₃C₂T_x were optimized to 4 wt% for each SQ, and the best hydrogen evolution reaction (HER) rate of 28.6 μmol h^-1 g^-1 was achieved by SQ-3 with four OH groups. The photocatalytic ability of the hybrid comes from the outstanding light harvesting of SQ dye, sufficient active sites of Ti₃C₂T_x, and efficient separation and transfer of the photogenerated charges via heterojunction between SQ aggregates and Ti₃C₂T_x. This work firstly demonstrates an example of SQ sensitizer combined with MXene for hydrogen generation, which provides a new insight to further explore the MXene-based hybrid nanomaterials for water splitting hydrogen evolution.

Interfacial engineering of Ti3C2 MXene/CdIn2S4 Schottky heterojunctions for boosting visible-light H2 evolution and Cr(VI) reduction

Developing efficient heterojunction photocatalysts that have a high charge carrier separation rate and improved light-harvesting capacity is a crucial step in solving energy crisis and reducing environmental pollution. Herein, we synthesized few-layered Ti₃C₂ MXene sheets (MXs) by a manual shaking process, and combined with CdIn₂S₄ (CIS) to construct novel Ti₃C₂ MXene/CdIn₂S₄ (MXCIS) Schottky heterojunction through a solvothermal method. The strong interface between two-dimensional (2D) Ti₃C₂ MXene and 2D CIS nanoplates led to enhanced light-harvesting capacity and promoted charge separation rate. Additionally, the presence of S vacancies on the MXCIS surface helped to trap free electrons. The optimal sample, 5-MXCIS (with 5 wt% MXs loading), exhibited outstanding performance for photocatalytic hydrogen (H₂) evolution and Cr(VI) reduction under visible light due to the synergistic effect of enhanced light-harvesting capacity and charge separation rate. The charge transfer kinetics was thoroughly studied using multiple techniques. The reactive species of ^•O₂^-, ^•OH and h⁺ were generated in 5-MXCIS system, and e^- and ^•O₂^- radicals were found to be the main contributors to Cr(VI) photoreduction. Based on the characterization results, a possible photocatalytic mechanism for H₂ evolution and Cr(VI) reduction was proposed. On the whole, this work provides new insights into the design of 2D/2D MXene-based Schottky heterojunction photocatalysts for boosting photocatalytic efficiency.

Artificial Photoenzymatic Reduction of Carbon Dioxide to Methanol by Using Electron Mediator and Co-factorAssembled ZnIn2 S4 Nanoflowers

Increased absorption of visible light, low electron-hole recombination, and fast electron transfer are the major objectives for highly effective photocatalysts in biocatalytic artificial photosynthetic systems. In this study, a polydopamine (PDA) layer containing electron mediator, [M], and NAD⁺ cofactor was assembled on the outer surface of ZnIn₂ S₄ nanoflower, and the as-prepared nanoparticle, ZnIn₂ S₄ /PDA@poly/[M]/NAD⁺ , was used for photoenzymatic methanol production from CO₂ . Because of effective capturing of visible light, reduced distance of electron transfer, and elimination of electron-holes recombination, a high NADH regeneration of 80.7±1.43 % could be obtained using the novel ZnIn₂ S₄ /PDA@poly/[M]/NAD⁺ . In the artificial photosynthesis system, a maximum methanol production of 116.7±11.8 μm was obtained. The enzymes and nanoparticles in the hybrid bio-photocatalysis system could be easily recovered using the ultrafiltration membrane at the bottom of the photoreactor. This is due to the successful immobilization of the small blocks including the electron mediator and cofactor on the surface of the photocatalyst. The ZnIn₂ S₄ /PDA@poly/[M]/NAD⁺ photocatalyst exhibited good stability and recyclability for methanol production. The novel concept presented in this study shows great promise for other sustainable chemical productions through artificial photoenzymatic catalysis.

Construction of Hollow Co3O4@ZnIn2S4 p-n Heterojunctions for Highly Efficient Photocatalytic Hydrogen Production

Photocatalysts derived from semiconductor heterojunctions for water splitting have bright prospects in solar energy conversion. Here, a Co₃O₄@ZIS p-n heterojunction was successfully created by developing two-dimensional ZnIn₂S₄ on ZIF-67-derived hollow Co₃O₄ nanocages, realizing efficient spatial separation of the electron-hole pair. Moreover, the black hollow structure of Co₃O₄ considerably increases the range of light absorption and the light utilization efficiency of the heterojunction avoids the agglomeration of ZnIn₂S₄ nanosheets and further improves the hydrogen generation rate of the material. The obtained Co₃O₄(20) @ZIS showed excellent photocatalytic H₂ activity of 5.38 mmol g^-1·h^-1 under simulated solar light, which was seven times more than that of pure ZnIn₂S₄. Therefore, these kinds of constructions of hollow p-n heterojunctions have a positive prospect in solar energy conversion fields.

Facile Synthesis of 2D/2D Ti2C3/ZnIn2S4 Heterostructure for Enhanced Photocatalytic Hydrogen Generation

ZnIn₂S₄, a novel two-dimensional visible light-responsive photocatalyst, has attracted much attention in the photocatalytic evolution of H₂ under visible light irradiation due to its attractive intrinsic photoelectric properties and geometric configuration. However, ZnIn₂S₄ still has severe charge recombination, which results in moderate photocatalytic performance. Herein, we report the successful synthesis of 2D/2D ZnIn₂S₄/Ti₃C₂ nanocomposites by a facile one-step hydrothermal method. The efficiency of the nanocomposites in photocatalytic hydrogen evolution under visible light irradiation was also evaluated for different ratios of Ti₃C₂, and the optimal photocatalytic activity was achieved at 5% Ti₃C₂. Importantly, the activity was significantly higher than that of pure ZnIn₂S₄, ZnIn₂S₄/Pt, and ZnIn₂S₄/graphene. The enhanced photocatalytic activity is mainly due to the close interfacial contact between Ti₃C₂ and ZnIn₂S₄ nanosheets, which amplifies the transport of photogenerated electrons and enhances the separation of photogenerated carriers. This research describes a novel approach for the synthesis of 2D MXenes for photocatalytic hydrogen production and expands the utility of MXene composite materials in the fields of energy storage and conversion.

In situ fabrication of MIL-68(In)@ZnIn2S4 heterojunction for enhanced photocatalytic hydrogen production

Metal-organic frameworks (MOFs), as a class of semiconductor-like materials, are widely used in photocatalysis. However, the limited visible light absorption and poor charge separation efficiency are the main challenges restricting their photocatalytic performance. Herein, the type II heterojunction MIL-68(In)@ZIS was successfully fabricated by in situ growth of ZnIn₂S₄ (ZIS) on the surface of a representative MOF, i.e. MIL-68(In). After composition optimization, MIL-68(In)-20@ZIS shows an extraordinary photocatalytic hydrogen production efficiency of 9.09 mmol g^-1 h^-1 and good photochemical stability, which far exceeds those of most photocatalysts. The hierarchical loose structure of MIL-68(In)-20@ZIS is conducive to the adsorption of reactants and mass transfer. Meanwhile, a large number of tight 2D contact interfaces significantly reduce the obstruction of charge transfer, paving the way for high-perform photocatalytic hydrogen evolution. The experimental results demonstrate that the MIL-68(In)@ZIS heterojunction achieves intensive photoresponse and effective charge separation and transfer benefiting from unique charge transport paths of a type II heterojunction. This study opens an avenue toward MOF-based heterojunctions for solar energy conversion.

Interface Engineering in 2D/2D Heterogeneous Photocatalysts

Assembling different 2D nanomaterials into heterostructures with strong interfacial interactions presents a promising approach for novel artificial photocatalytic materials. Chemically implementing the 2D nanomaterials' construction/stacking modes to regulate different interfaces can extend their functionalities and achieve good performance. Herein, based on different fundamental principles and photochemical processes, multiple construction modes (e.g., face-to-face, edge-to-face, interface-to-face, edge-to-edge) are overviewed systematically with emphasis on the relationships between their interfacial characteristics (e.g., point, linear, planar), synthetic strategies (e.g., in situ growth, ex situ assembly), and enhanced applications to achieve precise regulation. Meanwhile, recent efforts for enhancing photocatalytic performances of 2D/2D heterostructures are summarized from the critical factors of enhancing visible light absorption, accelerating charge transfer/separation, and introducing novel active sites. Notably, the crucial roles of surface defects, cocatalysts, and surface modification for photocatalytic performance optimization of 2D/2D heterostructures are also discussed based on the synergistic effect of optimization engineering and heterogeneous interfaces. Finally, perspectives and challenges are proposed to emphasize future opportunities for expanding 2D/2D heterostructures for photocatalysis.

Constructing Z-scheme 1D/2D heterojunction of ZnIn2S4 nanosheets decorated WO3 nanorods to enhance Cr(VI) photocatalytic reduction and rhodamine B degradation

Photocatalysis has been vastly employed as a feasible and efficient strategy for the removal of environmental pollutants. In this study, a well-designed core-shell heterojunction of WO3 decorated with ZnIn2S4 nanosheets were fabricated under mild in-situ conditions, and fabricated processes were systematically investigated with different fabrication durations. The coupling of WO3 and ZnIn2S4 (ZIS) resulted in a Z-scheme mechanism for charge carrier transfer, holding the respective redox capacity. The as-prepared 1D/2D WO3@ZIS heterostructure displayed the highest removal efficiency within 30 min for 25 mg L-1 Cr(VI), 89.3 and 29.7 times higher than pure WO3 and ZnIn2S4. 1D/2D WO3@ZIS remained excellently stable after 5 cycling experiments. Moreover, 40 mg L-1 RhB could be degraded within 50 min. The broad and short photogenerated electron transportation path is guaranteed by the 1D/2D and Z-scheme charge separation mechanism. It efficiently prevented photo-generated charge carriers from recombination, resulting in a longer carrier lifespan and better photocurrent responses than that of pure ones. This photocatalytic system showed promising results and also provides a framework for an efficient system for photocatalysis with potential for environmental application.

Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO₂ reduction, and wastewater treatment.

Integrating electronic structure regulation and dynamic active sites construction on NixCd1-xS-Ni0 photocatalyst for efficient hydrogen evolution

Regulating electronic structure and enriching active sites of photocatalysts are effective strategies to promote hydrogen evolution. Herein, a unique NixCd1-xS-Ni0 photocatalyst, including the surface nickel (Ni) doping and atomic Ni0 anchoring sites, is successfully prepared by Ni2+ ions exchange reaction (Ni2++ CdS → NixCd1-xS) and in-situ photo-induction of Ni0(Ni2++NixCd1-xS→hνNixCd1-xS-Ni0), respectively. As to Ni doping, the Ni replaced cadmium (Cd) atoms introduce hybridized states around the Fermi level, modulating the electronic structure of adjacent S atoms and optimizing the photocatalytic activity of sulfur (S) atoms. Besides, photogenerated Ni0 atoms, anchored on unsaturated S atoms, act as charge transfer bridges to reduce Ni2+ ions in the solution to Ni clusters (NixCd1-xS-Ni0→ne-NixCd1-xS-Ni). Subsequently, the displacement reaction of Ni clusters with protons (H+) spontaneously proceeds to produce hydrogen (H2) in an acidic solution (NixCd1-xS-Ni→2H+H2↑+Ni2++NixCd1-xS-Ni0). The equilibrium of photo-deposition/dissolution of Ni clusters realizes the construction of dynamic active sites, providing sustainable reaction centers and enhancing surface redox kinetics. The NixCd1-xS-Ni0 exhibits a high hydrogen evolution rate of 428 mmol·h-1·g-1 with a quantum efficiency of 75.6 % at 420 nm. This work provides the optimal S electronic structure for photocatalytic H2 evolution and constructs dynamic Ni clusters for chemical replacement reaction. This work provides the optimal S electronic structure for photocatalytic H2 evolution and constructs dynamic Ni clusters for displacement reaction, opening a dual pathway for efficient water reduction.

Surface Coordination of Pd/ZnIn2S4 toward Enhanced Photocatalytic Activity for Pyridine Denitrification

New surface coordination photocatalytic systems that are inspired by natural photosynthesis have significant potential to boost fuel denitrification. Despite this, the direct synthesis of efficient surface coordination photocatalysts remains a major challenge. Herein, it is verified that a coordination photocatalyst can be constructed by coupling Pd and CTAB-modified ZnIn₂S₄ semiconductors. The optimized Pd/ZnIn₂S₄ showed a superior degradation rate of 81% for fuel denitrification within 240 min, which was 2.25 times higher than that of ZnIn₂S₄. From the in situ FTIR and XPS spectra of 1% Pd/ZnIn₂S₄ before and after pyridine adsorption, we find that pyridine can be selectively adsorbed and form Zn⋅⋅⋅C-N or In⋅⋅⋅C-N on the surface of Pd/ZnIn₂S₄. Meanwhile, the superior electrical conductivity of Pd can be combined with ZnIn₂S₄ to promote photocatalytic denitrification. This work also explains the surface/interface coordination effect of metal/nanosheets at the molecular level, playing an important role in photocatalytic fuel denitrification.