Catalytic Synthesis of 8-Membered Ring Compounds via Cobalt(III)-Carbene Radicals

Light Induced Cobalt(III) Carbene Radical Formation from Dimethyl Malonate As Carbene Precursor

Radical-type carbene transfer catalysis is an efficient method for the direct functionalization of C-H and C=C bonds. However, carbene radical complexes are currently formed via high-energy carbene precursors, such as diazo compounds or iodonium ylides. Many of these carbene precursors require additional synthetic steps, have an explosive nature, or generate halogenated waste. Consequently, the utilization of carbene radical catalysis is limited by specific carbene precursors that access the carbene radical intermediate. In this study, we generate a cobalt(III) carbene radical complex from dimethyl malonate, which is commercially available and bench-stable. EPR and NMR spectroscopy were used to identify the intermediates and showed that the cobalt(III) carbene radical complex is formed upon light irradiation. In the presence of styrene, carbene transfer occurred, forming cyclopropane as the product. With this photochemical method, we demonstrate that dimethyl malonate can be used as an alternative carbene precursor in the formation of a cobalt(III) carbene radical complex.

Iron(II) Phthalocyanine-Catalyzed Homodimerization and Tandem Diamination of Diazo Compounds with Primary Amines: Access to Construct Substituted 2,3-Diaminosuccinonitriles in One-Pot

We herein first report the homodimerization and tandem diamination of diazo compounds with primary amines catalyzed by the iron(II) phthalocyanine (PcFe(II)), which can construct one C-C bond and two C-N bonds within 20 min in one-pot. Compared to the traditional metal-catalyzed N-H insertion reaction between amines with diazo reagents, the developed reaction almost does not generate the N-H insertion product, but the homodimerization/tandem diamination product. The proposed mechanism studies indicate that primary amines play a crucial role in the homocoupling of diazo compounds via dimerization of iron(III)-acetonitrile radical generated from the reaction between diazoacetonitrile with PcFe(II) coordinated by bis(amines); the β-hydride elimination is involved, and then, the attack of primary amines toward the carbon atoms on the formed C-C bond is followed. Moreover, this novel reaction can be used to effectively prepare substituted 2,3-diaminosuccinonitriles with high yields and even up to >99:1 d.r., encouragingly these products contain both 1,2-diamines and succinonitrile motifs, which are two classes of important organic compounds with significant applications in many yields. This reaction is also suitable for the gram-scale preparation of 2,3-bis(phenylamino)succinonitrile (2a) with a yield of 84%. Therefore, the developed reaction represents a new type of transformation.

Metalloradical Catalysis: General Approach for Controlling Reactivity and Selectivity of Homolytic Radical Reactions

Since Friedrich Wöhler's groundbreaking synthesis of urea in 1828, organic synthesis over the past two centuries has predominantly relied on the exploration and utilization of chemical reactions rooted in two-electron heterolytic ionic chemistry. While one-electron homolytic radical chemistry is both rich in fundamental reactivities and attractive with practical advantages, the synthetic application of radical reactions has been long hampered by the formidable challenges associated with the control over reactivity and selectivity of high-energy radical intermediates. To fully harness the untapped potential of radical chemistry for organic synthesis, there is a pressing need to formulate radically different concepts and broadly applicable strategies to address these outstanding issues. In pursuit of this objective, researchers have been actively developing metalloradical catalysis (MRC) as a comprehensive framework to guide the design of general approaches for controlling over reactivity and stereoselectivity of homolytic radical reactions. Essentially, MRC exploits the metal-centered radicals present in open-shell metal complexes as one-electron catalysts for homolytic activation of substrates to generate metal-entangled organic radicals as the key intermediates to govern the reaction pathway and stereochemical course of subsequent catalytic radical processes. Different from the conventional two-electron catalysis by transition metal complexes, MRC operates through one-electron chemistry utilizing stepwise radical mechanisms.

Forging Medium Rings via I(I)/I(III)-Catalyzed Diene Carbofunctionalization

A main-group catalysis-based strategy to access 8-membered carbocycles via the direct carbofunctionalization of 2-phenethyl-substituted 1,3-dienes is disclosed. Through the intervention of an I(I)/I(III) catalysis cycle, the synthesis of densely functionalized, fluorinated benzocyclooctenes can be achieved in an operationally simple manner. Modulating the oxidation/activation regime, and the external nucleophile, the process has been extended to unify the challenging cyclization with formation of allylic C-O, C-N, and C-C bonds (>30 examples). Derivatization of the product benzocyclooctenes is demonstrated together with X-ray conformational analysis, preliminary validation of enantioselective catalysis and a scalable resolution protocol.

Recent Synthetic Advances on the Use of Diazo Compounds Catalyzed by Metalloporphyrins

Diazo compounds are organic substances that are often used as precursors in organic synthesis like cyclization reactions, olefinations, cyclopropanations, cyclopropenations, rearrangements, and carbene or metallocarbene insertions into C-H, N-H, O-H, S-H, and Si-H bonds. Typically, reactions from diazo compounds are catalyzed by transition metals with various ligands that modulate the capacity and selectivity of the catalyst. These ligands can modify and enhance chemoselectivity in the substrate, regioselectivity and enantioselectivity by reflecting these preferences in the products. Porphyrins have been used as catalysts in several important reactions for organic synthesis and also in several medicinal applications. In the chemistry of diazo compounds, porphyrins are very efficient as catalysts when complexed with low-cost metals (e.g., Fe and Co) and, therefore, in recent years, this has been the subject of significant research. This review will summarize the advances in the studies involving the field of diazo compounds catalyzed by metalloporphyrins (M-Porph, M = Fe, Ru, Os, Co, Rh, Ir) in the last five years to provide a clear overview and possible opportunities for future applications. Also, at the end of this review, the properties of artificial metalloenzymes and hemoproteins as biocatalysts for a broad range of applications, namely those concerning carbene-transfer reactions, will be considered.

Carbene Radicals in Transition-Metal-Catalyzed Reactions

Discovered as organometallic curiosities in the 1970s, carbene radicals have become a staple in modern-day homogeneous catalysis. Carbene radicals exhibit nucleophilic radical-type reactivity orthogonal to classical electrophilic diamagnetic Fischer carbenes. Their successful catalytic application has led to the synthesis of a myriad of carbo- and heterocycles, ranging from simple cyclopropanes to more challenging eight-membered rings. The field has matured to employ densely functionalized chiral porphyrin-based platforms that exhibit high enantio-, regio-, and stereoselectivity. Thus far the focus has largely been on cobalt-based systems, but interest has been growing for the past few years to expand the application of carbene radicals to other transition metals. This Perspective covers the advances made since 2011 and gives an overview on the coordination chemistry, reactivity, and catalytic application of carbene radical species using transition metal complexes and catalysts.

Late-Stage C(sp3)-H Methylation of Drug Molecules

Methyl groups are well understood to play a critical role in pharmaceutical molecules, especially those bearing saturated heterocyclic cores. Accordingly, methods that install methyl groups onto complex molecules are highly coveted. Late-stage C-H functionalization is a particularly attractive approach, allowing chemists to bypass lengthy syntheses and facilitating the expedited synthesis of drug analogues. Herein, we disclose the direct introduction of methyl groups via C(sp3)-H functionalization of a broad array of saturated heterocycles, enabled by the merger of decatungstate photocatalysis and a unique nickel-mediated SH2 bond formation. To further demonstrate its synthetic utility as a tool for late-stage functionalization, this method was applied to a range of drug molecules en route to an array of methylated drug analogues.

Recent advances in 8π electrocyclization reactions

Medium-ring systems, which constitute a class of structurally intriguing and biologically important molecules, are present in many natural products and pharmaceuticals. However, the construction of these skeletons tends to be difficult because of the torsional strain of the medium-sized ring, and control of the selectivity is also challenging in these flexible skeletons. Electrocyclization is one of the most straightforward methods to construct medium-sized rings and this process typically proceeds in a stereospecific manner, resulting in the stereo-controlled formation of two neighboring stereocenters. At present, there are few studies on 8π electrocyclization, mainly focusing on the synthesis of small molecules, while the applications in the synthesis of functional materials and biological contexts are rare. This feature article highlights recent advances, from 2000 to 2022, in the 8π electrocyclization reaction. This study is organized into four sections based on the size/composition of the target ring, including the synthesis of aza-seven-membered, cycloheptene, cyclooctene and bicyclo[4,2,0]octane frameworks. We expect that this feature article will provide beneficial guidance for the selective construction of medium-ring skeletons.

Transition-Metal-Catalyzed Denitrogenative Annulation to Access High-Valued N-Heterocycles

Over the past few years, the development of efficient methods to construct high-valued N-heterocyclic molecules have received massive attention owing to their extensive application in the areas of medicinal chemistry, drug discovery, natural product synthesis and so on. To access those high-valued N-heterocycles, many methods have been developed. In this context, transition-metal-catalyzed denitrogenative annulation of 1,2,3-triazoles and 1,2,3,4-tetrazoles has appeared as a powerful synthetic tool because it offers a step- and atom-economical route for the preparation of the nitrogen-rich molecules. Compared with the denitrogenative annulation of various 1,2,3-triazole frameworks, annulation of 1,2,3,4-tetrazole remains more challenging due to the inertness of the tetrazole moiety. This Review summarizes the significant achievements made in the field of denitrogenative annulation of various 1,2,3-triazoles and 1,2,3,4-tetrazoles including some pioneering examples in this area of research. We anticipate that this denitrogenative annulation reaction will find broad applications in the pharmaceutical industry, drug discovery and other fields of medicinal chemistry.

Thermal and (Thermo-Reversible) Photochemical Cycloisomerization of 1H-2-Benzo[c]oxocins: From Synthetic Applications to the Development of a New T-Type Molecular Photoswitch

A novel T-type molecular photoswitch based on the reversible cyclization of 1H-2-benzo[c]oxocins to dihydro-4H-cyclobuta[c]isochromenes has been developed. The switching mechanism involves a light-triggered ring-contraction of 8-membered 1H-2-benzo[c]oxocins to 4,6-fused O-heterocyclic dihydro-4H-cyclobuta[c]isochromene ring systems, with reversion back to the 1H-2-benzo[c]oxocin state accessible through heating. Both processes are unidirectional and proceed with good efficiency, with switching properties─including reversibility and half-life time─easily adjusted via structural functionalization. Our new molecular-switching platform exhibits independence from solvent polarity, originating from its neutral-charge switching mechanism, a property highly sought-after for biological applications. The photoinduced ring-contraction involves a [2+2] conjugated-diene cyclization that obeys the Woodward-Hoffmann rules. In contrast, the reverse process initiates via a thermal ring-opening (T > 60 °C) to produce the original 8-membered 1H-2-benzo[c]oxocins, which is thermally forbidden according to the Woodward-Hoffmann rules. The thermal ring-opening is likely to proceed via an ortho-quinodimethane (o-QDM) intermediate, and the corresponding switching mechanisms are supported by experimental observations and density functional theory calculations. Other transformations of 1H-2-benzo[c]oxocins were found upon altering reaction conditions: prolonged heating of the 1H-2-benzo[c]oxocins at a significantly elevated temperature (72 h at 120 °C), with the resulting dihydronaphthalenes formed via the o-QDM intermediate. These reactions also proceed with good chemoselectivities, providing new synthetic protocols for motifs found in several bioactive molecules, but are otherwise difficult to access.

An iron(ii)-based metalloradical system for intramolecular amination of C(sp2)-H and C(sp3)-H bonds: synthetic applications and mechanistic studies

A catalytic system for intramolecular C(sp2)-H and C(sp3)-H amination of substituted tetrazolopyridines has been successfully developed. The amination reactions are developed using an iron-porphyrin based catalytic system. It has been demonstrated that the same iron-porphyrin based catalytic system efficiently activates both the C(sp2)-H and C(sp3)-H bonds of the tetrazole as well as azide-featuring substrates with a high level of regioselectivity. The method exhibited an excellent functional group tolerance. The method affords three different classes of high-value N-heterocyclic scaffolds. A number of important late-stage C-H aminations have been performed to access important classes of molecules. Detailed studies (experimental and computational) showed that both the C(sp2)-H and C(sp3)-H amination reactions involve a metalloradical activation mechanism, which is different from the previously reported electro-cyclization mechanism. Collectively, this study reports the discovery of a new class of metalloradical activation modes using a base metal catalyst that should find wide application in the context of medicinal chemistry, drug discovery and industrial applications.

Transition Metal Catalysis Controlled by Hydrogen Bonding in the Second Coordination Sphere

Transition metal catalysis is of utmost importance for the development of sustainable processes in academia and industry. The activity and selectivity of metal complexes are typically the result of the interplay between ligand and metal properties. As the ligand can be chemically altered, a large research focus has been on ligand development. More recently, it has been recognized that further control over activity and selectivity can be achieved by using the "second coordination sphere", which can be seen as the region beyond the direct coordination sphere of the metal center. Hydrogen bonds appear to be very useful interactions in this context as they typically have sufficient strength and directionality to exert control of the second coordination sphere, yet hydrogen bonds are typically very dynamic, allowing fast turnover. In this review we have highlighted several key features of hydrogen bonding interactions and have summarized the use of hydrogen bonding to program the second coordination sphere. Such control can be achieved by bridging two ligands that are coordinated to a metal center to effectively lead to supramolecular bidentate ligands. In addition, hydrogen bonding can be used to preorganize a substrate that is coordinated to the metal center. Both strategies lead to catalysts with superior properties in a variety of metal catalyzed transformations, including (asymmetric) hydrogenation, hydroformylation, C-H activation, oxidation, radical-type transformations, and photochemical reactions.

Cobalt(II)-tetraphenylporphyrin-catalysed carbene transfer from acceptor-acceptor iodonium ylides via N-enolate-carbene radicals

Square-planar cobalt(II) systems have emerged as powerful carbene transfer catalysts for the synthesis of numerous (hetero)cyclic compounds via cobalt(III)-carbene radical intermediates. Spectroscopic detection and characterization of reactive carbene radical intermediates is limited to a few scattered experiments, centered around monosubstituted carbenes. Here, we reveal the formation of disubstituted cobalt(III)-carbene radicals derived from a cobalt(II)-tetraphenylporphyrin complex and acceptor-acceptor λ³-iodaneylidenes (iodonium ylides) as carbene precursors and their catalytic application. Iodonium ylides generate biscarbenoid species via reversible ligand modification of the paramagnetic cobalt(II)-tetraphenylporphyrin complex catalyst. Two interconnected catalytic cycles are involved in the overall mechanism, with a monocarbene radical and an N-enolate-carbene radical intermediate at the heart of each respective cycle. Notably, N-enolate formation is not a deactivation pathway but a reversible process, enabling transfer of two carbene moieties from a single N-enolate-carbene radical intermediate. The findings are supported by extensive experimental and computational studies.

Synthesis of octagon-containing molecular nanocarbons

Nanocarbons, such as fullerenes, carbon nanotubes, and graphenes, have long inspired the scientific community. In order to synthesize nanocarbon molecules in an atomically precise fashion, many synthetic reactions have been developed. The ultimate challenge for synthetic chemists in nanocarbon science is the creation of periodic three-dimensional (3D) carbon crystals. In 1991, Mackay and Terrones proposed periodic 3D carbon crystals with negative Gaussian curvatures that consist of six- and eight-membered rings (the so-called Mackay-Terrones crystals). The existence of the eight-membered rings causes a warped nanocarbon structure. The Mackay-Terrones crystals are considered a "dream material", and have been predicted to exhibit extraordinary mechanical, magnetic, and optoelectronic properties (harder than diamond, for example). To turn the dream of having this wonder material into reality, the development of methods enabling the creation of octagon-embedding polycyclic structures (or nanographenes) is of fundamental and practical importance. This review describes the most vibrant synthetic achievements that the scientific community has performed to obtain curved polycyclic nanocarbons with eight-membered rings, building blocks that could potentially give access as templates to larger nanographenes, and eventually to Mackay-Terrones crystals, by structural expansion strategies.

The synthesis of seven- and eight-membered rings by radical strategies

Radical strategies for preparation of seven- or eight-membered rings.

Catalytic Synthesis of 1H-2-Benzoxocins: Cobalt(III)-Carbene Radical Approach to 8-Membered Heterocyclic Enol Ethers

The metallo-radical activation of ortho-allylcarbonyl-aryl N-arylsulfonylhydrazones with the paramagnetic cobalt(II) porphyrin catalyst [CoII(TPP)] (TPP = tetraphenylporphyrin) provides an efficient and powerful method for the synthesis of novel 8-membered heterocyclic enol ethers. The synthetic protocol is versatile and practical and enables the synthesis of a wide range of unique 1H-2-benzoxocins in high yields. The catalytic cyclization reactions proceed with excellent chemoselectivities, have a high functional group tolerance, and provide several opportunities for the synthesis of new bioactive compounds. The reactions are shown to proceed via cobalt(III)-carbene radical intermediates, which are involved in intramolecular hydrogen transfer (HAT) from the allylic position to the carbene radical, followed by a near-barrierless radical rebound step in the coordination sphere of cobalt. The proposed mechanism is supported by experimental observations, density functional theory (DFT) calculations, and spin trapping experiments.

Tf2O-Mediated Cyclization of 7-Enamides: Bioinspired Construction of Fused Eight-Membered Carbocyclic Enimines and Enones

In this paper, we document the construction of functionalized and fused eight-membered carbocycles by the triflic anhydride-mediated cyclization of 7-enamides. Taking advantage of the high electrophilicity of the nitrilium ion intermediates, generated in situ from secondary N-(2,6-dimethyl)anilides, the nonactivated, trisubstituted alkene-nitrilium cyclization reactions proceeded smoothly to afford nonconjugated β,γ-enimines (for fused 6/6/8 ring systems), conjugated α,β-enimines (for 6/5/8), or fused 5/8 ring systems in good yields. When the cyclization reactions were followed by one-pot acidic hydrolysis, the reaction led directly to the corresponding α,β-enones. For some substrates, the reaction afford an efficient access to pendent cyclic β,γ-enimines/enones.

A biomimetic SH2 cross-coupling mechanism for quaternary sp3-carbon formation

[Figure: see text].

Titanocene(III)-Catalyzed Precision Deuteration of Epoxides

We describe a titanocene(III)-catalyzed deuterosilylation of epoxides that provides β-deuterated anti-Markovnikov alcohols with excellent D-incorporation, in high yield, and often excellent diastereoselectivity after desilylation. The key to the success of the reaction is a novel activation method of Cp₂ TiCl₂ and (tBuC₅ H₄ )₂ TiCl₂ with BnMgBr and PhSiD₃ to provide [(RC₅ H₄ )₂ Ti(III)D] without isotope scrambling. It was developed after discovering an off-cycle scrambling with the previously described method. Our precision deuteration can be applied to the synthesis of drug precursors and highlights the power of combining radical chemistry with organometallic catalysis.

Terminal, Open-Shell Mo Carbide and Carbyne Complexes: Spin Delocalization and Ligand Noninnocence

Open-shell compounds bearing metal-carbon triple bonds, such as carbides and carbynes, are of significant interest as plausible intermediates in the reductive catenation of C₁ oxygenates. Despite the abundance of closed-shell carbynes reported, open-shell variants are very limited, and an open-shell carbide has yet to be reported. Herein, we report the synthesis of the first terminal, open-shell carbide complexes, [K][1] and [1][BAr^F₄] (1 = P2Mo(≡C:)(CO), P2 = a terphenyl diphosphine ligand), which differ by two redox states, as well as a series of related open-shell carbyne complexes. The complexes are characterized by single-crystal X-ray diffraction and NMR, EPR, and IR spectroscopies, while the electronic structures are probed by EPR studies and DFT calculations to assess spin delocalization. In the d₁ complexes, the spin is primarily localized on the metal (∼55-77% Mo d_xy) with delocalization on the triply bonded carbon of ∼0.05-0.09 e^-. In the reduced carbide [K][1], a direct metal-arene interaction enables ancillary ligand reduction, resulting in reduced radical character on the terminal carbide (⩽0.02 e^-). Reactivity studies with [K][1] reveal the formation of mixed-valent C-C coupled products at -40 °C, illustrating how productive reactivity manifolds can be engendered through the manipulation of redox states. Combined, the results inform on the electronic structure and reactivity of a new and underrepresented class of compounds with potential significance to a wide array of reactions involving open-shell species.

Controlling Radical-Type Single-Electron Elementary Steps in Catalysis with Redox-Active Ligands and Substrates

Advances in (spectroscopic) characterization of the unusual electronic structures of open-shell cobalt complexes bearing redox-active ligands, combined with detailed mapping of their reactivity, have uncovered several new catalytic radical-type protocols that make efficient use of the synergistic properties of redox-active ligands, redox-active substrates, and the metal to which they coordinate. In this perspective, we discuss the tools available to study, induce, and control catalytic radical-type reactions with redox-active ligands and/or substrates, contemplating recent developments in the field, including some noteworthy tools, methods, and reactions developed in our own group. The main topics covered are (i) tools to characterize redox-active ligands; (ii) novel synthetic applications of catalytic reactions that make use of redox-active carbene and nitrene substrates at open-shell cobalt-porphyrins; (iii) development of catalytic reactions that take advantage of purely ligand- and substrate-based redox processes, coupled to cobalt-centered spin-changing events in a synergistic manner; and (iv) utilization of redox-active ligands to influence the spin state of the metal. Redox-active ligands have emerged as useful tools to generate and control reactive metal-coordinated radicals, which give access to new synthetic methodologies and intricate (electronic) structures, some of which are yet to be exposed.

[2 + 2 + 1] Cycloaddition of N-tosylhydrazones, tert-butyl nitrite and alkenes: a general and practical access to isoxazolines

N-Tosylhydrazones have proven to be versatile synthons over the past several decades. However, to our knowledge, the construction of isoxazolines based on N-tosylhydrazones has not been examined. Herein, we report the first demonstrations of [2 + 2 + 1] cycloaddition reactions that allow the facile synthesis of isoxazolines, employing N-tosylhydrazones, tert-butyl nitrite (TBN) and alkenes as reactants. This process represents a new type of cycloaddition reaction with a distinct mechanism that does not involve the participation of nitrile oxides. This approach is both general and practical and exhibits a wide substrate scope, nearly universal functional group compatibility, tolerance of moisture and air, the potential for functionalization of complex bioactive molecules and is readily scaled up. Both control experiments and theoretical calculations indicate that this transformation proceeds via the in situ generation of a nitronate from the coupling of N-tosylhydrazone and TBN, followed by cycloaddition with an alkene and subsequent elimination of a tert-butyloxy group to give the desired isoxazoline.

Revisiting the Electronic Structure of Cobalt Porphyrin Nitrene and Carbene Radicals with NEVPT2-CASSCF Calculations: Doublet versus Quartet Ground States

Cobalt porphyrin complexes are established catalysts for carbene and nitrene radical group-transfer reactions. The key carbene and mono- and bisnitrene radical complexes coordinated to [Co(TPP)] (TPP = tetraphenylporphyrin) have previously been investigated with a variety of experimental techniques and supporting (single-reference) density functional theory (DFT) calculations that indicated doublet (S = 1/2) ground states for all three species. In this contribution, we revisit their electronic structures with multireference N-electron valence state perturbation theory (NEVPT2)-complete-active-space self-consistent-field (CASSCF) calculations to investigate possible multireference contributions to the ground-state wave functions. The carbene ([CoIII(TPP)(•CHCO2Et)]) and mononitrene ([CoIII(TPP)(•NNs)]) radical complexes were confirmed to have uncomplicated doublet ground states, although a higher carbene or nitrene radical character and a lower Co-C/N bond order was found in the NEVPT2-CASSCF calculations. Supported by electron paramagnetic resonance analysis and spin counting, paramagnetic molar susceptibility determination, and NEVPT2-CASSCF calculations, we report that the cobalt porphyrin bisnitrene complex ([CoIII(TPP•)(•NNs)2]) has a quartet (S = 3/2) spin ground state, with a thermally accesible multireference and multideterminant "broken-symmetry" doublet spin excited state. A spin flip on the porphyrin-centered unpaired electron allows for interconversion between the quartet and broken-symmetry doublet spin states, with an approximate 10-fold higher Boltzmann population of the quartet at room temperature.

Design Platform for Sustainable Catalysis with Radicals: Electrochemical Activation of Cp2 TiCl2 for Catalysis Unveiled

The combination of synthesis, rotating ring-disk electrode (RRDE) and cyclic voltammetry (CV) measurements, and computational investigations with the aid of DFT methods shows how a thiourea, a squaramide, and a bissulfonamide as additives affect the Eq Cr equilibrium of Cp2 TiCl2 . We have, for the first time, provided quantitative data for the Eq Cr equilibrium and have determined the stoichiometry of adduct formation of [Cp2 Ti(III)Cl2 ]- , [Cp2 Ti(III)Cl] and [Cp2 Ti(IV)Cl2 ] and the additives. By studying the structures of the complexes formed by DFT methods, we have established the Gibbs energies and enthalpies of complex formation as well as the adduct structures. The results not only demonstrate the correctness of our use of the Eq Cr equilibrium as predictor for sustainable catalysis. They are also a design platform for the development of novel additives in particular for enantioselective catalysis.

Ene-Yne Metathesis of Allylphosphonates and Allylphosphates: Synthesis of Phosphorus-Containing 1,3-Dienes

A variety of ene-yne cross metathesis reactions were performed using unsaturated phosphonate and phosphate reagents, affording the corresponding phosphorylated 1,3-diene products in good to excellent yields. These difficult ene-yne metatheses employed a Grubbs catalyst bearing a cyclic amino alkyl carbene ligand. A variety of terminal alkynes of varying substitution underwent the reaction, and different phosphorus-containing alkenes were found to give the conjugated diene products in high yields. The resulting dienes were further transformed by Horner-type Wittig reactions and a Diels-Alder cycloaddition.

Oxidation Under Reductive Conditions: From Benzylic Ethers to Acetals with Perfect Atom-Economy by Titanocene(III) Catalysis

Described here is a titanocene‐catalyzed reaction for the synthesis of acetals and hemiaminals from benzylic ethers and benzylic amines, respectively, with pendant epoxides. The reaction proceeds by catalysis in single‐electron steps. The oxidative addition comprises an epoxide opening. An H‐atom transfer, to generate a benzylic radical, serves as a radical translocation step, and an organometallic oxygen rebound as a reductive elimination. The reaction mechanism was studied by high‐level dispersion corrected hybrid functional DFT with implicit solvation. The low‐energy conformational space was searched by the efficient CREST program. The stereoselectivity was deduced from the lowest lying benzylic radical structures and their conformations are controlled by hyperconjugative interactions and steric interactions between the titanocene catalyst and the aryl groups of the substrate. An interesting mechanistic aspect is that the oxidation of the benzylic center occurs under reducing conditions.

Catalytic synthesis of functionalized amidines via cobalt-carbene radical coupling with isocyanides and amines

An atom- and step-economic multi-component cobalt-catalyzed synthesis of amidines has been reported by using amines, isocyanides, and diazo compounds as carbene sources.

Co-Catalyzed Transannulation of Pyridotriazoles with Isothiocyanates and Xanthate Esters

An efficient radical transannulation reaction of pyridotriazoles with isothiocyanates and xanthate esters was developed. This method features conversion of pyridotriazoles into two N-fused heterocyclic aromatic systems-imino-thiazolopyridines and oxo-thiazolopyridine derivatives-via one-step Co(II)-catalyzed transannulation reaction proceeding via a radical mechanism. The synthetic usefulness of the developed method was illustrated in the synthesis of amino acid derivatives and further transformations of obtained reaction products.

Iron-Catalyzed Amination of Strong Aliphatic C(sp3)-H Bonds

A concept for intramolecular denitrogenative C(sp³)-H amination of 1,2,3,4-tetrazoles bearing unactivated primary, secondary, and tertiary C-H bonds is discovered. This catalytic amination follows an unprecedented metalloradical activation mechanism. The utility of the method is showcased with the short synthesis of a bioactive molecule. Moreover, an initial effort has been embarked on for the enantioselective C(sp³)-H amination through the catalyst design. Collectively, this study underlines the development of C(sp³)-H bond functionalization chemistry that should find wide application in the context of drug discovery and natural product synthesis.

Catalytic Synthesis of 8-Membered Ring Compounds via Cobalt(III)-Carbene Radicals

The metalloradical activation of o-aryl aldehydes with tosylhydrazide and a cobalt(II) porphyrin catalyst produces cobalt(III)-carbene radical intermediates, providing a new and powerful strategy for the synthesis of medium-sized ring structures. Herein we make use of the intrinsic radical-type reactivity of cobalt(III)-carbene radical intermediates in the [CoII (TPP)]-catalyzed (TPP=tetraphenylporphyrin) synthesis of two types of 8-membered ring compounds; novel dibenzocyclooctenes and unprecedented monobenzocyclooctadienes. The method was successfully applied to afford a variety of 8-membered ring compounds in good yields and with excellent substituent tolerance. Density functional theory (DFT) calculations and experimental results suggest that the reactions proceed via hydrogen atom transfer from the bis-allylic/benzallylic C-H bond to the carbene radical, followed by two divergent processes for ring-closure to the two different types of 8-membered ring products. While the dibenzocyclooctenes are most likely formed by dissociation of o-quinodimethanes (o-QDMs) which undergo a non-catalyzed 8π-cyclization, DFT calculations suggest that ring-closure to the monobenzocyclooctadienes involves a radical-rebound step in the coordination sphere of cobalt. The latter mechanism implies that unprecedented enantioselective ring-closure reactions to chiral monobenzocyclooctadienes should be possible, as was confirmed for reactions mediated by a chiral cobalt-porphyrin catalyst.