1
|
Wang Y, Zheng D, Wang K, Yang Q, Qian J, Zhou J, Liu SF, Yang D. Lattice Mismatch at the Heterojunction of Perovskite Solar Cells. Angew Chem Int Ed Engl 2024; 63:e202405878. [PMID: 38713005 DOI: 10.1002/anie.202405878] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2024] [Revised: 05/06/2024] [Accepted: 05/07/2024] [Indexed: 05/08/2024]
Abstract
Lattice mismatch significantly influences microscopic transport in semiconducting devices, affecting interfacial charge behavior and device efficacy. This atomic-level disordering, often overlooked in previous research, is crucial for device efficiency and lifetime. Recent studies have highlighted emerging challenges related to lattice mismatch in perovskite solar cells, especially at heterojunctions, revealing issues like severe tensile stress, increased ion migration, and reduced carrier mobility. This review systematically discusses the effects of lattice mismatch on strain, material stability, and carrier dynamics. It also includes detailed characterizations of these phenomena and summarizes current strategies including epitaxial growth and buffer layer, as well as explores future solutions to mitigate mismatch-induced issues. We also provide the challenges and prospects for lattice mismatch, aiming to enhance the efficiency and stability of perovskite solar cells, and contribute to renewable energy technology advancements.
Collapse
Affiliation(s)
- Yong Wang
- Key Laboratory of Photoelectric Conversion and Utilization of Solar Energy, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an, 710119, China
| | - Dexu Zheng
- China National Nuclear Power Co., Ltd., Beijing, 100097, China
| | - Kai Wang
- Huanjiang Laboratory, School of Aeronautics and Astronautics, Zhejiang University, Hangzhou, 310027, China
| | - Qi Yang
- China National Nuclear Power Co., Ltd., Beijing, 100097, China
| | - Jin Qian
- Huanjiang Laboratory, School of Aeronautics and Astronautics, Zhejiang University, Hangzhou, 310027, China
| | - Jiaju Zhou
- China National Nuclear Power Co., Ltd., Beijing, 100097, China
| | - Shengzhong Frank Liu
- Key Laboratory of Photoelectric Conversion and Utilization of Solar Energy, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an, 710119, China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Dong Yang
- Key Laboratory of Photoelectric Conversion and Utilization of Solar Energy, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, 100049, China
| |
Collapse
|
2
|
Zhao H, Sun J, Kumar S, Li P, Thalluri SM, Wang ZM, Thumu U. Recent advances in metal halide perovskite based photocatalysts for artificial photosynthesis and organic transformations. Chem Commun (Camb) 2024; 60:5890-5911. [PMID: 38775203 DOI: 10.1039/d4cc01949k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/05/2024]
Abstract
Metal halide perovskites (MHP) emerged as highly promising materials for photocatalysis, offering significant advancements in the degradation of soluble and airborne pollutants, as well as the transformation of functional organic compounds. This comprehensive review focuses on recent developments in MHP-based photocatalysts, specifically examining two major categories: lead-based (such as CsPbBr3) and lead-free variants (e.g. Cs2AgBiX6, Cs3Bi2Br9 and others). While the review briefly discusses the contributions of MHPs to hydrogen (H2) production and carbon dioxide (CO2) reduction, the main emphasis is on the design principles that determine the effectiveness of perovskites in facilitating organic reactions and degrading hazardous chemicals through oxidative transformations. Furthermore, the review addresses the key factors that influence the catalytic efficiency of perovskites, including charge recombination, reaction mechanisms involving free radicals, hydroxyl ions, and other ions, as well as phase transformation and solvent compatibility. By offering a comprehensive overview, this review aims to serve as a guide for the design of MHP-based photocatalysis and shed light on the common challenges faced by the scientific community in the domain of organic transformations.
Collapse
Affiliation(s)
- Hairong Zhao
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, 611731, China.
| | - Jiachen Sun
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, 611731, China.
| | - Sonu Kumar
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, 611731, China.
| | - Peihang Li
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, 611731, China.
| | | | - Zhiming M Wang
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, 611731, China.
| | - Udayabhaskararao Thumu
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, 611731, China.
| |
Collapse
|
3
|
Cai YJ, Luo QX, Jiang QQ, Liu X, Chen XJ, Liu JL, Mao XL, Qi JX, Liang RP, Qiu JD. Hydrogen-Bonded Cocrystals Encapsulating CsPbBr3 Perovskite Nanocrystals with Enhancement of Charge Transport for Photocatalytic Reduction of Uranium. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2310672. [PMID: 38229539 DOI: 10.1002/smll.202310672] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/20/2023] [Revised: 01/04/2024] [Indexed: 01/18/2024]
Abstract
At present, poor stability and carrier transfer efficiency are the main problems that limit the development of perovskite-based photoelectric technologies. In this work, hydrogen-bonded cocrystal-coated perovskite composite (PeNCs@NHS-M) is easily obtained by inducing rapid crystallization of melamine (M) and N-hydroxysuccinimide (NHS) with PeNCs as the nuclei. The outer NHS-M cocrystal passivates the undercoordinated lead atoms by forming covalent bonds, thereby greatly reducing the trap density while maintaining good structure stability for perovskite nanocrystals. Moreover, benefiting from the interfacial covalent band linkage and long-range ordered structures of cocrystals, the charge transfer efficiency is effectively enhanced and PeNCs@NHS-M displays superior photoelectric performance. Based on the excellent photoelectric performance and abundant active sites of PeNCs@NHS-M, photocatalytic reduction of uranium is realized. PeNCs@NHS-M exhibits U(VI) reduction removal capability of up to 810.1 mg g-1 in the presence of light. The strategy of cocrystals trapping perovskite nanocrystals provides a simple synthesis method for composites and opens up a new idea for simultaneously improving the stability and photovoltaic performance of perovskite.
Collapse
Affiliation(s)
- Yuan-Jun Cai
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
| | - Qiu-Xia Luo
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
| | - Qiao-Qiao Jiang
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
| | - Xin Liu
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
| | - Xiao-Juan Chen
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
| | - Jin-Lan Liu
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
| | - Xiang-Lan Mao
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
| | - Jia-Xin Qi
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
| | - Ru-Ping Liang
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
| | - Jian-Ding Qiu
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
- State Key Laboratory of Nuclear Resources and Environment, East China University of Technology, Nanchang, 330013, China
| |
Collapse
|
4
|
Zhu Y, Zhang J. Antimony-Based Halide Perovskite Nanoparticles as Lead-Free Photocatalysts for Controlled Radical Polymerization. Macromol Rapid Commun 2024; 45:e2300695. [PMID: 38350418 DOI: 10.1002/marc.202300695] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2023] [Revised: 01/17/2024] [Indexed: 02/15/2024]
Abstract
Metal halide perovskites have emerged as versatile photocatalysts to convert solar energy for chemical processes. Perovskite photocatalyzed polymerization draws special attention due to its straightforward synthesis process and the ability to create advanced perovskite-polymer nanocomposites. Herein, this work employs Cs3Sb2Br9 perovskite nanoparticles (NPs) as a lead-free photocatalyst for light-controlled atom transfer radical polymerization (ATRP). Cs3Sb2Br9 NPs exhibit high reduction potential and interact with electronegative bromide initiator with Lewis acid Sb sites, enabling efficient photoinduced reduction of initiators and controlled polymerization under blue light irradiation. Methacrylate monomers with various functional groups are successfully polymerized, and the resulting polymer showcased a dispersity (Đ) as small as 1.27. The living nature of polymerization is confirmed by high chain end fidelity and kinetic studies. Moreover, Cs3Sb2Br9 NPs serve as heterogeneous photocatalysts, demonstrating recyclability and reusability for up to four cycles. This work presents a promising approach to overcome the limitations of lead-based perovskites in photoinduced controlled radical polymerization, offering a sustainable and efficient alternative for the synthesis of well-defined polymeric materials.
Collapse
Affiliation(s)
- Yifan Zhu
- Department of Materials Science and Nanoengineering, Rice University, Houston, Texas, 77005, USA
| | - Jiahui Zhang
- Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology, Atlanta, Georgia, 30332, USA
| |
Collapse
|
5
|
Peng Y, Zhang Y, Wang X, Sui XY, Lin MY, Zhu Y, Jing C, Yuan HY, Yang S, Liu PF, Dai S, Zheng Z, Yang HG, Hou Y. Polar Aromatic Two-dimensional Dion-Jacobson Halide Perovskites for Efficient Photocatalytic H 2 Evolution. Angew Chem Int Ed Engl 2024; 63:e202319882. [PMID: 38337137 DOI: 10.1002/anie.202319882] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/22/2023] [Accepted: 02/08/2024] [Indexed: 02/12/2024]
Abstract
Polar materials with spontaneous polarization (Ps) have emerged as highly promising photocatalysts for efficient photocatalytic H2 evolution owing to the Ps-enhanced photogenerated carrier separation. However, traditional inorganic polar materials often suffer from limitations such as wide band gaps and poor carrier transport, which hinders their photocatalytic H2 evolution efficiency. Here, we rationally synthesized a series of isostructural two-dimensional (2D) aromatic Dion-Jacobson (DJ) perovskites, namely (2-(2-Aminoethyl)pyridinium)PbI4 (2-APDPI), (3-(2-Aminoethyl)pyridinium)PbI4 (3-APDPI), and (4-(2-Aminoethyl)pyridinium)PbI4 (4-APDPI), where 2-APDPI and 4-APDPI crystalize in polar space groups with piezoelectric constants (d33) of approximately 40 pm V-1 and 3-APDPI adopts a centrosymmetric structure. Strikingly, owing to the Ps-facilitated separation of photogenerated carriers, polar 2-APDPI and 4-APDPI exhibit a 3.9- and 2.8-fold increase, respectively, in photocatalytic H2 evolution compared to the centrosymmetric 3-APDPI. As a pioneering study, this work provides an efficient approach for exploring new polar photocatalysts and highlights their potential in promoting photocatalytic H2 evolution.
Collapse
Affiliation(s)
- Yu Peng
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Yang Zhang
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Xing Wang
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Xin Yuan Sui
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Miao Yu Lin
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Yan Zhu
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Changfei Jing
- Key Laboratory for Advanced Materials and Feringa Nobel Prize Scientist Joint Research Center, Institute of Fine Chemicals, School of Chemistry and Molecular Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Hai Yang Yuan
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Shuang Yang
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Peng Fei Liu
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Sheng Dai
- Key Laboratory for Advanced Materials and Feringa Nobel Prize Scientist Joint Research Center, Institute of Fine Chemicals, School of Chemistry and Molecular Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Zhaoke Zheng
- State Key Laboratory of Crystal Materials, Shandong University, Jinan, 250100, China
| | - Hua Gui Yang
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| | - Yu Hou
- Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, China
| |
Collapse
|
6
|
Li L, Xu D, Xu X, Tian Z, Zhou X, Yang S, Zhang Z. Modulation of active center distance of hybrid perovskite for boosting photocatalytic reduction of carbon dioxide to ethylene. Proc Natl Acad Sci U S A 2024; 121:e2318970121. [PMID: 38315838 PMCID: PMC10873559 DOI: 10.1073/pnas.2318970121] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/30/2023] [Accepted: 12/22/2023] [Indexed: 02/07/2024] Open
Abstract
Solar-driven photocatalytic CO2 reduction is an energy-efficient and sustainable strategy to mitigate CO2 levels in the atmosphere. However, efficient and selective conversion of CO2 into multi-carbon products, like C2H4, remains a great challenge due to slow multi-electron-proton transfer and sluggish C-C coupling. Herein, a two-dimensional thin-layered hybrid perovskite is fabricated through filling of oxygen into iodine vacancy in pristine DMASnI3 (DMA = dimethylammonium). The rational-designed DMASnI3(O) induces shrinkage of active sites distance and facilitates dimerization of C-C coupling of intermediates. Upon simulated solar irradiation, the DMASnI3(O) photocatalyst achieves a high selectivity of 74.5%, corresponding to an impressive electron selectivity of 94.6%, for CO2 to C2H4 conversion and an effective C2H4 yield of 11.2 μmol g-1 h-1. In addition, the DMASnI3(O) inherits excellent water stability and implements long-term photocatalytic CO2 reduction to C2H4 in a water medium. This work establishes a unique paradigm to convert CO2 to C2+ hydrocarbons in a perovskite-based photocatalytic system.
Collapse
Affiliation(s)
- Linjuan Li
- Shanghai Key Laboratory of Green Chemistry and Chemical Processes, School of Chemistry and Molecular Engineering, East China Normal University, Shanghai200062, China
| | - Dawei Xu
- Shanghai Key Laboratory of Green Chemistry and Chemical Processes, School of Chemistry and Molecular Engineering, East China Normal University, Shanghai200062, China
| | - Xiankui Xu
- Shanghai Key Laboratory of Green Chemistry and Chemical Processes, School of Chemistry and Molecular Engineering, East China Normal University, Shanghai200062, China
| | - Zheng Tian
- Shanghai Key Laboratory of Green Chemistry and Chemical Processes, School of Chemistry and Molecular Engineering, East China Normal University, Shanghai200062, China
| | - Xue Zhou
- Shanghai Key Laboratory of Green Chemistry and Chemical Processes, School of Chemistry and Molecular Engineering, East China Normal University, Shanghai200062, China
| | - Shenbo Yang
- Hongzhiwei Technology (Shanghai) Co. Ltd., Shanghai200240, China
| | - Zhonghai Zhang
- Shanghai Key Laboratory of Green Chemistry and Chemical Processes, School of Chemistry and Molecular Engineering, East China Normal University, Shanghai200062, China
- State Key Laboratory of Petroleum Molecular and Process Engineering (SKLPMPE), Sinopec Research Institute of Petroleum Processing Co., Ltd., Beijing100083, China
- State Key Laboratory of Petroleum Molecular and Process Engineering (SKLPMPE), East China Normal University, Shanghai200062, China
| |
Collapse
|
7
|
Feng J, Mak CH, Yu L, Han B, Shen HH, Santoso SP, Yuan M, Li FF, Song H, Colmenares JC, Hsu HY. Structural Modification Strategies, Interfacial Charge-Carrier Dynamics, and Solar Energy Conversion Applications of Organic-Inorganic Halide Perovskite Photocatalysts. SMALL METHODS 2024; 8:e2300429. [PMID: 37381684 DOI: 10.1002/smtd.202300429] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/01/2023] [Revised: 05/17/2023] [Indexed: 06/30/2023]
Abstract
Over the past few decades, organic-inorganic halide perovskites (OIHPs) as novel photocatalyst materials have attracted intensive attention for an impressive variety of photocatalytic applications due to their excellent photophysical (chemical) properties. Regarding practical application and future commercialization, the air-water stability and photocatalytic performance of OIHPs need to be further improved. Accordingly, studying modification strategies and interfacial interaction mechanisms is crucial. In this review, the current progress in the development and photocatalytic fundamentals of OIHPs is summarized. Furthermore, the structural modification strategies of OIHPs, including dimensionality control, heterojunction design, encapsulation techniques, and so on for the enhancement of charge-carrier transfer and the enlargement of long-term stability, are elucidated. Subsequently, the interfacial mechanisms and charge-carrier dynamics of OIHPs during the photocatalytic process are systematically specified and classified via diverse photophysical and electrochemical characterization methods, such as time-resolved photoluminescence measurements, ultrafast transient absorption spectroscopy, electrochemical impedance spectroscopy measurements, transient photocurrent densities, and so forth. Eventually, various photocatalytic applications of OIHPs, including hydrogen evolution, CO2 reduction, pollutant degradation, and photocatalytic conversion of organic matter.
Collapse
Affiliation(s)
- Jianpei Feng
- School of Energy and Environment & Department of Materials Science and Engineering & Centre for Functional Photonics (CFP), City University of Hong Kong, Kowloon Tong, Hong Kong, 999077, China
- Shenzhen Research Institute of City University of Hong Kong, Shenzhen, 518057, P. R. China
| | - Chun Hong Mak
- School of Energy and Environment & Department of Materials Science and Engineering & Centre for Functional Photonics (CFP), City University of Hong Kong, Kowloon Tong, Hong Kong, 999077, China
- Shenzhen Research Institute of City University of Hong Kong, Shenzhen, 518057, P. R. China
| | - Li Yu
- School of Energy and Environment & Department of Materials Science and Engineering & Centre for Functional Photonics (CFP), City University of Hong Kong, Kowloon Tong, Hong Kong, 999077, China
- Shenzhen Research Institute of City University of Hong Kong, Shenzhen, 518057, P. R. China
- Key Laboratory for Water Quality and Conservation of the Pearl River Delta, Ministry of Education, Institute of Environmental Research at Greater Bay, Guangzhou University, Guangzhou, Guangdong, 510006, P. R. China
| | - Bin Han
- Materials Institute of Atomic and Molecular Science, Shaanxi University of Science and Technology, Xi'an, 710021, P. R. China
| | - Hsin-Hui Shen
- Department of Materials Science and Engineering, Faculty of Engineering, Monash University, Clayton, Victoria, 3800, Australia
| | - Shella Permatasari Santoso
- Chemical Engineering Department, Faculty of Engineering, Widya Mandala Surabaya Catholic University, Surabaya, East Java, 60114, Indonesia
| | - Mingjian Yuan
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Renewable Energy Conversion and Storage Center (RECAST), College of Chemistry, Nankai University, Tianjin, 300071, P. R. China
| | - Fang-Fang Li
- School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, 430074, P. R. China
| | - Haisheng Song
- Wuhan National Laboratory for Optoelectronics (WNLO) and School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, Hubei, 430074, P. R. China
| | | | - Hsien-Yi Hsu
- School of Energy and Environment & Department of Materials Science and Engineering & Centre for Functional Photonics (CFP), City University of Hong Kong, Kowloon Tong, Hong Kong, 999077, China
- Shenzhen Research Institute of City University of Hong Kong, Shenzhen, 518057, P. R. China
| |
Collapse
|
8
|
Li H, Lai C, Wei Z, Zhou X, Liu S, Qin L, Yi H, Fu Y, Li L, Zhang M, Xu F, Yan H, Xu M, Ma D, Li Y. Strategies for improving the stability of perovskite for photocatalysis: A review of recent progress. CHEMOSPHERE 2023; 344:140395. [PMID: 37820881 DOI: 10.1016/j.chemosphere.2023.140395] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/23/2023] [Revised: 10/05/2023] [Accepted: 10/07/2023] [Indexed: 10/13/2023]
Abstract
Photocatalysis is currently a hot research field, which provides promising processes to produce green energy sources and other useful products, thus eventually benefiting carbon emission reduction and leading to a low-carbon future. The development and application of stable and efficient photocatalytic materials is one of the main technical bottlenecks in the field of photocatalysis. Perovskite has excellent performance in the fields of photocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), carbon dioxide reduction reaction (CO2RR), organic synthesis and pollutant degradation due to its unique structure, flexibility and resulting excellent photoelectric and catalytic properties. The stability problems caused by perovskite's susceptibility to environmental influences hinder its further application in the field of photocatalysis. Therefore, this paper innovatively summarizes and analyzes the existing methods and strategies to improve the stability of perovskite in the field of photocatalysis. Specifically, (i) component engineering, (ii) morphological control, (iii) hybridization and encapsulation are thought to improve the stability of perovskites while improving photocatalytic efficiency. Finally, the challenges and prospects of perovskite photocatalysts are discussed, which provides constructive thinking for the potential application of perovskite photocatalysts.
Collapse
Affiliation(s)
- Hanxi Li
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Cui Lai
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China.
| | - Zhen Wei
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China.
| | - Xuerong Zhou
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Shiyu Liu
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Lei Qin
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Huan Yi
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Yukui Fu
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Ling Li
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Mingming Zhang
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Fuhang Xu
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Huchuan Yan
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Mengyi Xu
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Dengsheng Ma
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| | - Yixia Li
- College of Environmental Science and Engineering, Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha, 410082, PR China
| |
Collapse
|
9
|
Adib MA, Sharmin F, Basith MA. Tuning the morphology, stability and optical properties of CsSnBr 3 nanocrystals through bismuth doping for visible-light-driven applications. NANOSCALE ADVANCES 2023; 5:6194-6209. [PMID: 37941959 PMCID: PMC10628993 DOI: 10.1039/d3na00309d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/08/2023] [Accepted: 09/30/2023] [Indexed: 11/10/2023]
Abstract
In this investigation, we have demonstrated the synthesis of lead-free CsSnBr3 (CSB) and 5 mol% bismuth (Bi) doped CSB (CSB'B) nanocrystals, with a stable cubic perovskite structure following a facile hot injection technique. The Bi substitution in CSB was found to play a vital role in reducing the size of the nanocrystals significantly, from 316 ± 93 to 87 ± 22 nm. Additionally, Bi doping has inhibited the oxidation of Sn2+ of CSB perovskite. A reduction in the optical band gap from 1.89 to 1.73 eV was observed for CSB'B and the PL intensity was quenched due to the introduction of the Bi3+ dopant. To demonstrate one of the visible-light-driven applications of the nanocrystals, photodegradation experiments were carried out as a test case. Interestingly, under UV-vis irradiation, the degradation efficiency of CSB'B was roughly one order lower than that of P25 titania nanoparticles; however, it was almost five times higher when driven by visible light under identical conditions. The water stability of CSB'B perovskite and suppression of the oxidative degradation of Sn were confirmed through XRD and XPS analyses after photocatalysis. Moreover, by employing experimental parameters, DFT-based first-principles calculations were performed, which demonstrated an excellent qualitative agreement between experimental and theoretical outcomes. The as-synthesized Bi-doped CSB might be a stable halide perovskite with potential in visible-light-driven applications.
Collapse
Affiliation(s)
- Md Asif Adib
- Nanotechnology Research Laboratory, Department of Physics, Bangladesh University of Engineering and Technology Dhaka-1000 Bangladesh
| | - Fahmida Sharmin
- Nanotechnology Research Laboratory, Department of Physics, Bangladesh University of Engineering and Technology Dhaka-1000 Bangladesh
| | - M A Basith
- Nanotechnology Research Laboratory, Department of Physics, Bangladesh University of Engineering and Technology Dhaka-1000 Bangladesh
| |
Collapse
|
10
|
Peng S, Yang Z, Sun M, Yu L, Li Y. Stabilizing Metal Halide Perovskites for Solar Fuel Production: Challenges, Solutions, and Future Prospects. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2304711. [PMID: 37548095 DOI: 10.1002/adma.202304711] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/18/2023] [Revised: 07/06/2023] [Indexed: 08/08/2023]
Abstract
Metal halide perovskites (MHPs) are emerging photocatalyst materials that can enable sustainable solar-to-chemical energy conversion by virtue of their broad absorption spectra, effective separation/transport of photogenerated carriers, and solution processability. Although preliminary studies show the excellent photocatalytic activities of MHPs, their intrinsic structural instability due to the low formation energy and soft ionic nature is an open challenge for their practical applications. This review discusses the latest understanding of the stability issue and strategies to overcome this issue for MHP-based photocatalysis. First, the origin of the instability issue at atomic levels and the design rules for robust structures are analyzed and elucidated. This is then followed by presenting several different material design strategies for stability enhancement, including reaction medium modification, material surface protection, structural dimensionality engineering, and chemical composition engineering. Emphases are placed on understanding the effects of these strategies on photocatalytic stability as well as the possible structure-performance correlation. Finally, the possible future research directions for pursuing stable and efficient MHP photocatalysts in order to accelerate their technological maturity on a practical scale are outlined. With that, it is hoped to provide readers a valuable snapshot of this rapidly developing and exciting field.
Collapse
Affiliation(s)
- Shaomin Peng
- Macao Institute of Materials Science and Engineering (MIMSE), MUST-SUDA Joint Research Center for Advanced Functional Materials, Macau University of Science and Technology, Taipa, Macau SAR, 999078, China
- Key Laboratory of Clean Chemistry Technology of Guangdong Regular Higher Education Institutions, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Zhuoying Yang
- Key Laboratory of Clean Chemistry Technology of Guangdong Regular Higher Education Institutions, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Ming Sun
- Key Laboratory of Clean Chemistry Technology of Guangdong Regular Higher Education Institutions, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Lin Yu
- Macao Institute of Materials Science and Engineering (MIMSE), MUST-SUDA Joint Research Center for Advanced Functional Materials, Macau University of Science and Technology, Taipa, Macau SAR, 999078, China
- Key Laboratory of Clean Chemistry Technology of Guangdong Regular Higher Education Institutions, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Yanguang Li
- Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, Suzhou, 215123, China
- Jiangsu Key Laboratory for Advanced Negative Carbon Technologies, Soochow University, Suzhou, 215123, China
| |
Collapse
|
11
|
Huang Y, Li S, Zhang L. Accelerated Multisolvent Prediction for Aqueous Stable Halide Perovskite Materials. ACS APPLIED MATERIALS & INTERFACES 2023; 15:48771-48784. [PMID: 37812382 DOI: 10.1021/acsami.3c09507] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/10/2023]
Abstract
Solvent treatment is critical to improving the stability of halide perovskite materials that suffer from notorious issues that inhibit their industrial deployment; however, the complicated perovskite virtual design space with different types of solvent modifiers is inaccessible to traditional trial-and-error methods. In this study, machine learning is employed to predict stable multiple solvent-modified perovskite films under hostile conditions, and a complicated quinary solvent system "DMSO + DMF + toluene + NMP + GBL" is effectively identified to significantly improve the optoelectronic stability of CH3NH3PbI3 in water. The "combinatorial solvent design" approach is realized by an extra tree machine learning model, which leads to a prediction dataset containing aqueous stability labels of 6720 new quinary solvent/perovskite systems. Importantly, the accuracy of the machine learning model is verified via photoelectrochemical experiments, achieving an experimental accuracy of 80%. A machine learning-predicted quinary solvent system offers significantly enhanced aqueous stability and 1000 times larger aqueous photocurrents, compared with the control CH3NH3PbI3 film under the same hostile conditions. This study demonstrates the efficacy of machine learning for solvent design toward stable halide perovskite materials under hostile conditions.
Collapse
Affiliation(s)
- Yiru Huang
- Department of Materials Physics, School of Chemistry and Materials Science, Nanjing University of Information Science & Technology, 210044, Nanjing, China
| | - Shenyue Li
- Department of Materials Physics, School of Chemistry and Materials Science, Nanjing University of Information Science & Technology, 210044, Nanjing, China
| | - Lei Zhang
- Department of Materials Physics, School of Chemistry and Materials Science, Nanjing University of Information Science & Technology, 210044, Nanjing, China
| |
Collapse
|
12
|
Chen ZY, Huang NY, Xu Q. Metal halide perovskite materials in photocatalysis: Design strategies and applications. Coord Chem Rev 2023. [DOI: 10.1016/j.ccr.2023.215031] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/15/2023]
|
13
|
Azmy A, Li S, Angeli GK, Welton C, Raval P, Li M, Zibouche N, Wojtas L, Reddy GNM, Guo P, Trikalitis PN, Spanopoulos I. Porous and Water Stable 2D Hybrid Metal Halide with Broad Light Emission and Selective H 2 O Vapor Sorption. Angew Chem Int Ed Engl 2023; 62:e202218429. [PMID: 36656785 DOI: 10.1002/anie.202218429] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/13/2022] [Revised: 01/16/2023] [Accepted: 01/18/2023] [Indexed: 01/20/2023]
Abstract
In this work we report a strategy for generating porosity in hybrid metal halide materials using molecular cages that serve as both structure-directing agents and counter-cations. Reaction of the [2.2.2] cryptand (DHS) linker with PbII in acidic media gave rise to the first porous and water-stable 2D metal halide semiconductor (DHS)2 Pb5 Br14 . The corresponding material is stable in water for a year, while gas and vapor-sorption studies revealed that it can selectively and reversibly adsorb H2 O and D2 O at room temperature (RT). Solid-state NMR measurements and DFT calculations verified the incorporation of H2 O and D2 O in the organic linker cavities and shed light on their molecular configuration. In addition to porosity, the material exhibits broad light emission centered at 617 nm with a full width at half-maximum (FWHM) of 284 nm (0.96 eV). The recorded water stability is unparalleled for hybrid metal halide and perovskite materials, while the generation of porosity opens new pathways towards unexplored applications (e.g. solid-state batteries) for this class of hybrid semiconductors.
Collapse
Affiliation(s)
- Ali Azmy
- Department of Chemistry, University of South Florida, Tampa, FL 33620, USA
| | - Shunran Li
- Department of Chemical and Environmental Engineering, Yale University, 9 Hillhouse Avenue, New Haven, CT 06520, USA.,Energy Sciences Institute, Yale University, 810 West Campus Drive, West Haven, CT 06516, USA
| | - Giasemi K Angeli
- Department of Chemistry, University of Crete, 71003, Heraklion, Greece
| | - Claire Welton
- University of Lille, CNRS, Centrale Lille Institut, Univ. Artois, UMR8181-UCCS-Unité de Catalyse et Chimie du Solide, 59000, Lille, France
| | - Parth Raval
- University of Lille, CNRS, Centrale Lille Institut, Univ. Artois, UMR8181-UCCS-Unité de Catalyse et Chimie du Solide, 59000, Lille, France
| | - Min Li
- West Campus Materials Characterization Core, Yale University, New Haven, CT 06520, USA
| | | | - Lukasz Wojtas
- Department of Chemistry, University of South Florida, Tampa, FL 33620, USA
| | - G N Manjunatha Reddy
- University of Lille, CNRS, Centrale Lille Institut, Univ. Artois, UMR8181-UCCS-Unité de Catalyse et Chimie du Solide, 59000, Lille, France
| | - Peijun Guo
- Department of Chemical and Environmental Engineering, Yale University, 9 Hillhouse Avenue, New Haven, CT 06520, USA.,Energy Sciences Institute, Yale University, 810 West Campus Drive, West Haven, CT 06516, USA
| | | | | |
Collapse
|
14
|
Meng W, Wang C, Li Y, Hu G, Sui S, Xu G, Peng M, Deng Z. Synthesis of Efficient and Stable Tetrabutylammonium Copper Halides with Dual Emissions for Warm White Light-Emitting Diodes. Chemistry 2023; 29:e202202675. [PMID: 36599805 DOI: 10.1002/chem.202202675] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/27/2022] [Revised: 12/23/2022] [Accepted: 12/27/2022] [Indexed: 01/06/2023]
Abstract
In order to achieve a high color-rendering index (CRI) and low correlated color temperature (CCT) indoor lighting, single-component phosphors with broad-band dual emission are in high demand for white-light-emitting diodes (WLEDs). However, phosphors with such fluorescent properties are rare at present. Herein, we report a facile solid-state chemical method for the synthesis of single-component phosphor with broad-band emission and a large Stokes shift that can meet the requirements of future white-light sources. These new tetrabutylammonium copper halides phosphors have excellent warm white emission characteristics, and their luminescence peaks are located at 494 and 654 nm. The optimized photoluminescence (PL) quantum yield can reach 93.7 %. The typical CIE coordinate of the as-fabricated WLED is at (0.3620, 0.3731) with a CRI of 89 and low CCT of 4516 K.
Collapse
Affiliation(s)
- Wen Meng
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing National Laboratory of Microstructures, Nanjing University, Nanjing, Jiangsu, 210023, P. R. China
| | - Chuying Wang
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing National Laboratory of Microstructures, Nanjing University, Nanjing, Jiangsu, 210023, P. R. China
| | - Yacong Li
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing National Laboratory of Microstructures, Nanjing University, Nanjing, Jiangsu, 210023, P. R. China
| | - Guangcai Hu
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing National Laboratory of Microstructures, Nanjing University, Nanjing, Jiangsu, 210023, P. R. China
| | - Shiqi Sui
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing National Laboratory of Microstructures, Nanjing University, Nanjing, Jiangsu, 210023, P. R. China
| | - Guangyong Xu
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing National Laboratory of Microstructures, Nanjing University, Nanjing, Jiangsu, 210023, P. R. China
| | - Min Peng
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing National Laboratory of Microstructures, Nanjing University, Nanjing, Jiangsu, 210023, P. R. China
| | - Zhengtao Deng
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing National Laboratory of Microstructures, Nanjing University, Nanjing, Jiangsu, 210023, P. R. China
| |
Collapse
|
15
|
Chen S, Yin H, Liu P, Wang Y, Zhao H. Stabilization and Performance Enhancement Strategies for Halide Perovskite Photocatalysts. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2203836. [PMID: 35900361 DOI: 10.1002/adma.202203836] [Citation(s) in RCA: 21] [Impact Index Per Article: 21.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/28/2022] [Revised: 07/15/2022] [Indexed: 06/15/2023]
Abstract
Solar-energy-powered photocatalytic fuel production and chemical synthesis are widely recognized as viable technological solutions for a sustainable energy future. However, the requirement of high-performance photocatalysts is a major bottleneck. Halide perovskites, a category of diversified semiconductor materials with suitable energy-band-enabled high-light-utilization efficiencies, exceptionally long charge-carrier-diffusion-length-facilitated charge transport, and readily tailorable compositional, structural, and morphological properties, have emerged as a new class of photocatalysts for efficient hydrogen evolution, CO2 reduction, and various organic synthesis reactions. Despite the noticeable progress, the development of high-performance halide perovskite photocatalysts (HPPs) is still hindered by several key challenges: the strong ionic nature and high hydrolysis tendency induce instability and an unsatisfactory activity due to the need for a coactive component to realize redox processes. Herein, the recently developed advanced strategies to enhance the stability and photocatalytic activity of HPPs are comprehensively reviewed. The widely applicable stability enhancement strategies are first articulated, and the activity improvement strategies for fuel production and chemical synthesis are then explored. Finally, the challenges and future perspectives associated with the application of HPPs in efficient production of fuels and value-added chemicals are presented, indicating the irreplaceable role of the HPPs in the field of photocatalysis.
Collapse
Affiliation(s)
- Shan Chen
- Institutes of Physical Science and Information Technology, Anhui University, Hefei, 230039, P. R. China
| | - Huajie Yin
- Institute of Solid State Physics, Hefei Institutes of Physical ScienceChinese Academy of Sciences, 230031, Hefei, P. R. China
| | - Porun Liu
- Centre for Catalysis and Clean Energy, Gold Cost Campus, Griffith University, Queensland, 4222, Australia
| | - Yun Wang
- Centre for Catalysis and Clean Energy, Gold Cost Campus, Griffith University, Queensland, 4222, Australia
| | - Huijun Zhao
- Centre for Catalysis and Clean Energy, Gold Cost Campus, Griffith University, Queensland, 4222, Australia
| |
Collapse
|
16
|
de Souza Carvalho TA, Magalhaes LF, do Livramento Santos CI, de Freitas TAZ, Carvalho Vale BR, Vale da Fonseca AF, Schiavon MA. Lead-Free Metal Halide Perovskite Nanocrystals: From Fundamentals to Applications. Chemistry 2023; 29:e202202518. [PMID: 36206198 DOI: 10.1002/chem.202202518] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/12/2022] [Indexed: 11/22/2022]
Abstract
Lead (Pb) halide perovskite nanocrystals, with the general formula APbX3 , where A=CH3 NH3+ , CH(NH2 )2+ , or Cs+ and X=Cl- , Br- , or I- , have emerged as a class of materials with promising properties due to their remarkable optical properties and solar cell performance. However, important issues still need to be addressed to enable practical applications of these materials, such as instability, mass production, and Pb toxicity. Recent studies have carried out the replacement of Pb by various less-toxic cations as Sn, Ge, Sb, and Bi. This variety of chemical compositions provide Pb-free perovskite and metal halide nanostructures with a wide spectral range, in addition to being considered less toxic, therefore having greater practical applicability. Highlighting the necessity to address and solve the toxicity problems related to Pb-containing perovskite, this review considers the prospects of the Pb-free perovskite, involving synthesis methods, and properties of them, including advantages, disadvantages, and applications.
Collapse
Affiliation(s)
- Thaís Adriany de Souza Carvalho
- Departamento de Ciências Naturais (DCNat), Universidade Federal de São João del-Rei (UFSJ), São João del-Rei, MG, 36301-160, Brasil
| | - Leticia Ferreira Magalhaes
- Departamento de Ciências Naturais (DCNat), Universidade Federal de São João del-Rei (UFSJ), São João del-Rei, MG, 36301-160, Brasil
| | | | - Thiago Alvares Zamaro de Freitas
- Departamento de Ciências Naturais (DCNat), Universidade Federal de São João del-Rei (UFSJ), São João del-Rei, MG, 36301-160, Brasil
| | - Brener Rodrigo Carvalho Vale
- Departamento de Ciências Naturais (DCNat), Universidade Federal de São João del-Rei (UFSJ), São João del-Rei, MG, 36301-160, Brasil.,Instituto de Física "Gleb Wataghin", Universidade Estadual de Campinas, Unicamp, Campinas, São Paulo, 13083-859, Brasil
| | - André Felipe Vale da Fonseca
- Departamento de Ciências Naturais (DCNat), Universidade Federal de São João del-Rei (UFSJ), São João del-Rei, MG, 36301-160, Brasil
| | - Marco Antônio Schiavon
- Departamento de Ciências Naturais (DCNat), Universidade Federal de São João del-Rei (UFSJ), São João del-Rei, MG, 36301-160, Brasil
| |
Collapse
|
17
|
Romani L, Speltini A, Chiara R, Morana M, Coccia C, Tedesco C, Armenise V, Colella S, Milella A, Listorti A, Profumo A, Ambrosio F, Mosconi E, Pau R, Pitzalis F, Simbula A, Ricciarelli D, Saba M, Medina-Llamas M, De Angelis F, Malavasi L. Air- and water-stable and photocatalytically active germanium-based 2D perovskites by organic spacer engineering. CELL REPORTS. PHYSICAL SCIENCE 2023; 4:101214. [PMID: 37292086 PMCID: PMC10246422 DOI: 10.1016/j.xcrp.2022.101214] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 04/29/2022] [Revised: 11/22/2022] [Accepted: 12/08/2022] [Indexed: 06/10/2023]
Abstract
There is increasing interest in the role of metal halide perovskites for heterogeneous catalysis. Here, we report a Ge-based 2D perovskite material that shows intrinsic water stability realized through organic cation engineering. Incorporating 4-phenylbenzilammonium (PhBz) we demonstrate, by means of extended experimental and computational results, that PhBz2GeBr4 and PhBz2GeI4 can achieve relevant air and water stability. The creation of composites embedding graphitic carbon nitride (g-C3N4) allows a proof of concept for light-induced hydrogen evolution in an aqueous environment by 2D Ge-based perovskites thanks to the effective charge transfer at the heterojunction between the two semiconductors.
Collapse
Affiliation(s)
- Lidia Romani
- Department of Chemistry and INSTM, University of Pavia, Via Taramelli 16, 27100 Pavia, Italy
- Tecnologie di Generazione e Materiali, Ricerca sul Sistema Energetico - RSE S.p.A., Via Rubattino 54, 20134 Milano, Italy
| | - Andrea Speltini
- Department of Chemistry and INSTM, University of Pavia, Via Taramelli 16, 27100 Pavia, Italy
| | - Rossella Chiara
- Department of Chemistry and INSTM, University of Pavia, Via Taramelli 16, 27100 Pavia, Italy
| | - Marta Morana
- Department of Chemistry and INSTM, University of Pavia, Via Taramelli 16, 27100 Pavia, Italy
| | - Clarissa Coccia
- Department of Chemistry and INSTM, University of Pavia, Via Taramelli 16, 27100 Pavia, Italy
| | - Costanza Tedesco
- Department of Chemistry and INSTM, University of Pavia, Via Taramelli 16, 27100 Pavia, Italy
| | - Vincenza Armenise
- Department of Chemistry, University of Bari “Aldo Moro,” via Orabona 4, 70126 Bari, Italy
| | - Silvia Colella
- National Research Council, Institute of Nanotechnology (CNR-NANOTEC), c/o Department of Chemistry, University of Bari “Aldo Moro,” via Orabona 4, 70126 Bari, Italy
| | - Antonella Milella
- Department of Chemistry, University of Bari “Aldo Moro,” via Orabona 4, 70126 Bari, Italy
| | - Andrea Listorti
- Department of Chemistry, University of Bari “Aldo Moro,” via Orabona 4, 70126 Bari, Italy
| | - Antonella Profumo
- Department of Chemistry and INSTM, University of Pavia, Via Taramelli 16, 27100 Pavia, Italy
| | - Francesco Ambrosio
- Dipartimento di Scienze, University of Basilicata, Viale dell’Ateno Lucano, 10, 85100 Potenza, Italy
- Department of Chemistry and Biology “A. Zambelli,” University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, Salerno, Italy
- Computational Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimiche “Giulio Natta” (CNR-SCITEC), via Elce di Sotto 8, 06123 Perugia, Italy
| | - Edoardo Mosconi
- Computational Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimiche “Giulio Natta” (CNR-SCITEC), via Elce di Sotto 8, 06123 Perugia, Italy
| | - Riccardo Pau
- Department of Physics, University of Cagliari, Cittadella Universitaria S.P. Monserrato-Sestu km 0.7, 09042 Monserrato, Italy
- Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 09747 Groningen, the Netherlands
| | - Federico Pitzalis
- Department of Physics, University of Cagliari, Cittadella Universitaria S.P. Monserrato-Sestu km 0.7, 09042 Monserrato, Italy
| | - Angelica Simbula
- Department of Physics, University of Cagliari, Cittadella Universitaria S.P. Monserrato-Sestu km 0.7, 09042 Monserrato, Italy
| | - Damiano Ricciarelli
- Unidad Académica Preparatoria, Plantel II, Universidad Autónoma de Zacatecas, Zacatecas, Zacatecas 98068, México
| | - Michele Saba
- Department of Physics, University of Cagliari, Cittadella Universitaria S.P. Monserrato-Sestu km 0.7, 09042 Monserrato, Italy
| | - Maria Medina-Llamas
- Department of Chemistry and INSTM, University of Pavia, Via Taramelli 16, 27100 Pavia, Italy
- Unidad Académica Preparatoria, Plantel II, Universidad Autónoma de Zacatecas, Zacatecas, Zacatecas 98068, México
| | - Filippo De Angelis
- Computational Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimiche “Giulio Natta” (CNR-SCITEC), via Elce di Sotto 8, 06123 Perugia, Italy
- Department of Chemistry, Biology and Biotechnology, University of Perugia, via Elce di Sotto 8, 06123 Perugia, Italy
- Department of Natural Sciences & Mathematics, College of Sciences & Human Studies, Prince Mohammad Bin Fahd University, Dhahran 34754, Saudi Arabia
| | - Lorenzo Malavasi
- Department of Chemistry and INSTM, University of Pavia, Via Taramelli 16, 27100 Pavia, Italy
| |
Collapse
|
18
|
Aragon AG, Wiggins TE, Ma X, Geyer SM. Lead-free Cs3Bi2Br9 and Cs3Bi2-xSbxBr9 nanocrystals as photocatalysts with enhanced activity for the degradation of rhodamine in aqueous environments. J Photochem Photobiol A Chem 2022. [DOI: 10.1016/j.jphotochem.2022.114391] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
19
|
Progress in all-inorganic heterometallic halide layered double perovskites. TRENDS IN CHEMISTRY 2022. [DOI: 10.1016/j.trechm.2022.10.008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
20
|
Wan X, Mo G, Luo J. Metal–organic frameworks derived
TiO
2
for photocatalytic degradation of tetracycline hydrochloride. CAN J CHEM ENG 2022. [DOI: 10.1002/cjce.24550] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Xin Wan
- Department of Chemical Engineering Sichuan University Chengdu Sichuan People's Republic of China
| | - Guanglai Mo
- Department of Chemical Engineering Sichuan University Chengdu Sichuan People's Republic of China
| | - Jianhong Luo
- Department of Chemical Engineering Sichuan University Chengdu Sichuan People's Republic of China
| |
Collapse
|
21
|
Liang S, He S, Zhang M, Yan Y, Jin T, Lian T, Lin Z. Tailoring Charge Separation at Meticulously Engineered Conjugated Polymer/Perovskite Quantum Dot Interface for Photocatalyzing Atom Transfer Radical Polymerization. J Am Chem Soc 2022; 144:12901-12914. [PMID: 35816775 DOI: 10.1021/jacs.2c04680] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
Abstract
In stark contrast to conventional organic ligand-capped counterparts, the ability to create stable metal halide perovskite nanocrystals strongly tethered with conjugated polymers (CPs) represents an important endeavor toward tailoring charge carrier dynamics at their interface that critically underpins applications of this unique class of all semiconducting, organic-inorganic nanomaterials for optoelectronics. This, however, has yet to be largely explored. Herein, we report, for the first time, the unraveling of efficient charge separation at judiciously designed CP/perovskite quantum dot (QD) interface for photoinduced atom transfer radical polymerization (p-ATRP). Such scrutiny is rendered by in situ crafting an array of monodisperse, highly stable, CP-ligated perovskite QDs with precisely controlled dimensions of each constituent via capitalizing on unimolecular, amphiphilic starlike block copolymers as nanoreactors. The intimate and permanent surface tethering of CPs imparts remarkable thermal, photo, and polar solvent stabilities of CP-ligated perovskite QDs. More importantly, they manifest efficient interfacial charge separation with a profound dependence on the length of ligated CPs and the size of perovskite QDs. The outstanding structural stabilities and charge separation characteristic enable CP-ligated perovskite QDs as robust photocatalysts for p-ATRP of a wide selection of monomers with stable and controllable reaction kinetics, also depending crucially on the length of CPs and the size of perovskite QDs. In principle, an exciting variety of CP-ligated, uniform perovskite QDs with virtually unlimited material choice of both markedly improved stabilities and tunable electronic band alignments can be readily accessed by exploiting the amphiphilic starlike block copolymer nanoreactor strategy for use in photodetectors, sensors, and LEDs, among other areas.
Collapse
Affiliation(s)
- Shuang Liang
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States.,School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Sheng He
- Department of Chemistry, Emory University, 1515 Dickey Drive, NE, Atlanta, Georgia 30322, United States
| | - Mingyue Zhang
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Yan Yan
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States.,School of Chemistry and Materials Science, Jiangsu Key Laboratory of Green Synthetic Chemistry for Functional Materials, Jiangsu Normal University, Xuzhou 221116, China
| | - Tao Jin
- Department of Chemistry, Emory University, 1515 Dickey Drive, NE, Atlanta, Georgia 30322, United States
| | - Tianquan Lian
- Department of Chemistry, Emory University, 1515 Dickey Drive, NE, Atlanta, Georgia 30322, United States
| | - Zhiqun Lin
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| |
Collapse
|
22
|
Ma J, Yang X, Yao S, Guo Y, Sun R. Photocatalytic Biorefinery to Lactic Acid: A Carbon Nitride Framework with O Atoms Replacing the Graphitic N Linkers Shows Fast Migration/Separation of Charge. ChemCatChem 2022. [DOI: 10.1002/cctc.202200097] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Affiliation(s)
- Jiliang Ma
- Liaoning Key Laboratory of Lignocellulose Chemistry and Biomaterials College of Light Industry and Chemical Engineering Dalian Polytechnic University Dalian 116034 P. R. China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control College of Light Industrial and Food Engineering Guangxi University Nanning 530004 P. R. China
- National Forestry and Grassland Administration Key Laboratory of Plant Fiber Functional Materials Fuzhou Fujian 350108 P. R. China
- State Key Laboratory of Biobased Material and Green Papermaking Qilu University of Technology Shandong Academy of Sciences Jinan 250353 P. R. China
| | - Xiaopan Yang
- Liaoning Key Laboratory of Lignocellulose Chemistry and Biomaterials College of Light Industry and Chemical Engineering Dalian Polytechnic University Dalian 116034 P. R. China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control College of Light Industrial and Food Engineering Guangxi University Nanning 530004 P. R. China
| | - Yanzhu Guo
- Liaoning Key Laboratory of Lignocellulose Chemistry and Biomaterials College of Light Industry and Chemical Engineering Dalian Polytechnic University Dalian 116034 P. R. China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control College of Light Industrial and Food Engineering Guangxi University Nanning 530004 P. R. China
| | - Runcang Sun
- Liaoning Key Laboratory of Lignocellulose Chemistry and Biomaterials College of Light Industry and Chemical Engineering Dalian Polytechnic University Dalian 116034 P. R. China
| |
Collapse
|
23
|
Kaiser W, Ricciarelli D, Mosconi E, Alothman AA, Ambrosio F, De Angelis F. Stability of Tin- versus Lead-Halide Perovskites: Ab Initio Molecular Dynamics Simulations of Perovskite/Water Interfaces. J Phys Chem Lett 2022; 13:2321-2329. [PMID: 35245058 PMCID: PMC8935372 DOI: 10.1021/acs.jpclett.2c00273] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2022] [Accepted: 02/28/2022] [Indexed: 05/27/2023]
Abstract
Tin-halide perovskites (THPs) have emerged as promising lead-free perovskites for photovoltaics and photocatalysis applications but still fall short in terms of stability and efficiency with respect to their lead-based counterpart. A detailed understanding of the degradation mechanism of THPs in a water environment is missing. This Letter presents ab initio molecular dynamics (AIMD) simulations to unravel atomistic details of THP/water interfaces comparing methylammonium tin iodide, MASnI3, with the lead-based MAPbI3. Our results reveal facile solvation of surface tin-iodine bonds in MASnI3, while MAPbI3 remains more robust to degradation despite a larger amount of adsorbed water molecules. Additional AIMD simulations on dimethylammonium tin bromide, DMASnBr3, investigate the origins of their unprecedented water stability. Our results indicate the presence of amorphous surface layers of hydrated zero-dimensional SnBr3 complexes which may protect the inner structure from degradation and explain their success as photocatalysts. We believe that the atomistic details of the mechanisms affecting THP (in-)stability may inspire new strategies to stabilize THPs.
Collapse
Affiliation(s)
- Waldemar Kaiser
- Computational
Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimiche “Giulio Natta”
(CNR-SCITEC), Via Elce di Sotto 8, 06123 Perugia, Italy
| | - Damiano Ricciarelli
- Computational
Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimiche “Giulio Natta”
(CNR-SCITEC), Via Elce di Sotto 8, 06123 Perugia, Italy
- Department
of Chemistry, Biology and Biotechnology, University of Perugia, Via Elce di Sotto 8, 06123 Perugia, Italy
| | - Edoardo Mosconi
- Computational
Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimiche “Giulio Natta”
(CNR-SCITEC), Via Elce di Sotto 8, 06123 Perugia, Italy
- Chemistry
Department, College of Science, King Saud
University, Riyadh 11451, Kingdom of Saudi Arabia
| | - Asma A. Alothman
- Chemistry
Department, College of Science, King Saud
University, Riyadh 11451, Kingdom of Saudi Arabia
| | - Francesco Ambrosio
- Computational
Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimiche “Giulio Natta”
(CNR-SCITEC), Via Elce di Sotto 8, 06123 Perugia, Italy
- Department
of Chemistry and Biology “A. Zambelli”, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, Salerno, Italy
- CNST@Polimi,
Istituto Italiano di Tecnologia, Via Pascoli 70/3, 20133 Milano, Italy
| | - Filippo De Angelis
- Computational
Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimiche “Giulio Natta”
(CNR-SCITEC), Via Elce di Sotto 8, 06123 Perugia, Italy
- Department
of Chemistry, Biology and Biotechnology, University of Perugia, Via Elce di Sotto 8, 06123 Perugia, Italy
| |
Collapse
|
24
|
Kang M, Choi D, Bae JY, Byun M. Micro-to-Nanometer Scale Patterning of Perovskite Inks via Controlled Self-Assemblies. MATERIALS (BASEL, SWITZERLAND) 2022; 15:1521. [PMID: 35208061 PMCID: PMC8878448 DOI: 10.3390/ma15041521] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/05/2022] [Revised: 02/10/2022] [Accepted: 02/15/2022] [Indexed: 12/04/2022]
Abstract
In the past decade, perovskite materials have gained intensive interest due to their remarkable material properties in optoelectronics and photodetectors. This review highlights recent advances in micro-to-nanometer scale patterning of perovskite inks, placing an undue emphasis on recently developed approaches to harness spatially ordered and crystallographically oriented structures with unprecedented regularity via controlled self-assemblies, including blade coating, inkjet printing, and nanoimprinting. Patterning of the perovskite elements at the micro- or nanometer scale might be a key parameter for their integration in a real system. Nowadays, unconventional approaches based on irreversible solution evaporation hold an important position in the structuring and integration of perovskite materials. Herein, easier type patterning techniques based on evaporations of polymer solutions and the coffee ring effect are systematically reviewed. The recent progress in the potential applications of the patterned perovskite inks is also introduced.
Collapse
Affiliation(s)
- Misun Kang
- Department of Advanced Materials Engineering, Keimyung University, Daegu 42601, Korea;
- Department of Chemistry, Keimyung University, Daegu 42601, Korea
| | - Dooho Choi
- School of Advanced Materials Engineering, Dong-Eui University, Busan 47340, Korea;
| | - Jae Young Bae
- Department of Chemistry, Keimyung University, Daegu 42601, Korea
| | - Myunghwan Byun
- Department of Advanced Materials Engineering, Keimyung University, Daegu 42601, Korea;
| |
Collapse
|
25
|
Sui J, Liu H, Hu S, Sun K, Wan G, Zhou H, Zheng X, Jiang HL. A General Strategy to Immobilize Single-Atom Catalysts in Metal-Organic Frameworks for Enhanced Photocatalysis. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2109203. [PMID: 34883530 DOI: 10.1002/adma.202109203] [Citation(s) in RCA: 35] [Impact Index Per Article: 17.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/14/2021] [Revised: 12/07/2021] [Indexed: 06/13/2023]
Abstract
Single-atom catalysts (SACs) are witnessing rapid development due to their high activity and selectivity toward diverse reactions. However, it remains a grand challenge in the general synthesis of SACs, particularly featuring an identical chemical microenvironment and on the same support. Herein, a universal synthetic protocol is developed to immobilize SACs in metal-organic frameworks (MOFs). Significantly, by means of SnO2 as a mediator or adaptor, not only different single-atom metal sites, such as Pt, Cu, and Ni, etc., can be installed, but also the MOF supports can be changed (for example, UiO-66-NH2 , PCN-222, and DUT-67) to afford M1 /SnO2 /MOF architecture. Taking UiO-66-NH2 as a representative, the Pt1 /SnO2 /MOF exhibits approximately five times higher activity toward photocatalytic H2 production than the corresponding Pt nanoparticles (≈2.5 nm) stabilized by SnO2 /UiO-66-NH2 . Remarkably, despite featuring identical parameters in the chemical microenvironment and support in M1 /SnO2 /UiO-66-NH2 , the Pt1 catalyst possesses a hydrogen evolution rate of 2167 µmol g-1 h-1 , superior to the Cu1 and Ni1 counterparts, which is attributed to the differentiated hydrogen binding free energies, as supported by density-functional theory (DFT) calculations. This is thought to be the first report on a universal approach toward the stabilization of SACs with identical chemical microenvironment on an identical support.
Collapse
Affiliation(s)
- Jianfei Sui
- College of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China
| | - Hang Liu
- College of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China
| | - Shaojin Hu
- College of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China
| | - Kang Sun
- College of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China
| | - Gang Wan
- Department of Mechanical Engineering and Department of Chemical Engineering, Stanford University, Stanford, CA, 94305, USA
| | - Hua Zhou
- X-ray Science Division, Advanced Photon Source Argonne National Laboratory, Lemont, IL, 60439, USA
| | - Xiao Zheng
- College of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China
| | - Hai-Long Jiang
- College of Chemistry and Materials Science, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China
| |
Collapse
|
26
|
Huang Q, Guo Y, Chen J, Lou Y, Zhao Y. NiCoP modified lead-free double perovskite Cs 2AgBiBr 6 for efficient photocatalytic hydrogen generation. NEW J CHEM 2022. [DOI: 10.1039/d2nj00435f] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
A NiCoP/Cs2AgBiBr6 composite was successfully synthesised via electrostatic coupling to achieve a hydrogen generation rate of 12.5%, which was ∼88 times higher than that of pure Cs2AgBiBr6.
Collapse
Affiliation(s)
- Qiao Huang
- School of Chemistry and Chemical Engineering, Southeast University, Nanjing, 211189, P. R. China
| | - Yanmei Guo
- School of Chemistry and Chemical Engineering, Southeast University, Nanjing, 211189, P. R. China
| | - Jinxi Chen
- School of Chemistry and Chemical Engineering, Southeast University, Nanjing, 211189, P. R. China
| | - Yongbing Lou
- School of Chemistry and Chemical Engineering, Southeast University, Nanjing, 211189, P. R. China
| | - Yixin Zhao
- School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
| |
Collapse
|
27
|
Meng Y, Qin N, Hun X. ZnSe nanodisks:Ti 3C 2 MXenes-modified electrode for nucleic acid liquid biopsy with photoelectrochemical strategy. Mikrochim Acta 2021; 189:2. [PMID: 34855037 DOI: 10.1007/s00604-021-05117-0] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/15/2021] [Accepted: 11/20/2021] [Indexed: 01/13/2023]
Abstract
ZnSe nanodisks:Ti3C2 MXene complex was prepared for the first time. Based on its remarkable photoelectrochemical performance, combined with the enzyme-free toehold-mediated strand displacement reaction, a photoelectrochemical biosensor for the detection of the non-small-cell cancer biomarker ctDNA KRAS G12D was developed. ZnSe nanodisks were in situ grown on Ti3C2 MXene surface by two-step hydrothermal method. The high conductivity and adjustable band gap of MXene significantly enhanced the photoelectric response of ZnSe. Subsequently, the photoelectrochemical biosensor was prepared by combining with the signal amplification function of p-aminophenol and the enzyme-free toehold-mediated strand displacement reaction on the modified ITO electrode surface. Under the optimized conditions, the linear detection range is 0.5 ~ 100.0 fM, and the detection limit is 0.2 fM, which realizes the sensitive detection of KRAS G12D. The photoelectrochemical biosensor constructed opens up a new pathway for the preparation of new Mxene-based composite materials and the research of photoelectrochemical biosensor. Nucleic acid liquid biopsy with ZnSe nanodisks:Ti3C2 MXene photoelectroactive modified electrode.
Collapse
Affiliation(s)
- Yuchan Meng
- Key Laboratory of Optic-electric Sensing and Analytical Chemistry for Life Science, Qingdao University of Science and Technology, 266042, Qingdao, People's Republic of China
| | - Nana Qin
- Key Laboratory of Optic-electric Sensing and Analytical Chemistry for Life Science, Qingdao University of Science and Technology, 266042, Qingdao, People's Republic of China
| | - Xu Hun
- Key Laboratory of Optic-electric Sensing and Analytical Chemistry for Life Science, Qingdao University of Science and Technology, 266042, Qingdao, People's Republic of China.
| |
Collapse
|
28
|
Wu F, Pathak R, Liu J, Jian R, Zhang T, Qiao Q. Photoelectrochemical Application and Charge Transport Dynamics of a Water-Stable Organic-Inorganic Halide (C 6H 4NH 2CuCl 2I) Film in Aqueous Solution. ACS APPLIED MATERIALS & INTERFACES 2021; 13:44274-44283. [PMID: 34503328 DOI: 10.1021/acsami.1c11082] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
A water-stable thin film composed of C6H4NH2CuCl2I was fabricated using spin-coating precursor solutions that dissolved equimolar amounts of C6H4NH2I and CuCl2 in N,N-dimethylformamide. Photoelectrochemical characteristics show that the C6H4NH2CuCl2I film demonstrated a stable photocurrent (∼1 μA/cm2) in an aqueous solution under white light (11.5 mW/cm2) even after 3000 s, while exhibiting a photon-to-current efficiency of 0.093% under AM1.5 (100 mW/cm2) illumination. However, these values were significantly lower than those of the CH3NH3PbX3 (X = I, Cl) film in solid devices. The electron diffusion length L(e-) (373 nm) and hole diffusion length L(h+) (177 nm) in the C6H4NH2CuCl2I photoelectrode were significantly lower than those of CH3NH3PbX3, limiting the photoelectrochemical and photocatalysis performances. Moreover, L(h+) was shorter than L(e-) in the C6H4NH2CuCl2I photoelectrode, resulting in the hole-collecting efficiency [ηc(h+)] being lower than the electron-collecting efficiency [ηc(e-)]. A CuO interlayer was introduced as a hole transport layer for the C6H4NH2CuCl2I photoelectrode, which improved L(h+) and ηc(h+).
Collapse
Affiliation(s)
- Fan Wu
- School of Science, Huzhou University, Huzhou, Zhejiang Province 313000, People's Republic of China
| | - Rajesh Pathak
- Applied Materials Division, Argonne National Laboratory, Lemont, Illinois 60439, United States
| | - Junhong Liu
- School of Science, Huzhou University, Huzhou, Zhejiang Province 313000, People's Republic of China
| | - Ronghua Jian
- School of Science, Huzhou University, Huzhou, Zhejiang Province 313000, People's Republic of China
| | - Tiansheng Zhang
- School of Science, Huzhou University, Huzhou, Zhejiang Province 313000, People's Republic of China
| | - Quinn Qiao
- Mechanical and Aerospace Engineering, Syracuse University, Syracuse, New York 13244, United States
| |
Collapse
|
29
|
Park S, Choi S, Kim S, Nam KT. Metal Halide Perovskites for Solar Fuel Production and Photoreactions. J Phys Chem Lett 2021; 12:8292-8301. [PMID: 34427441 DOI: 10.1021/acs.jpclett.1c02373] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Photocatalysis is an easily configurable and cost-effective technology for the conversion of solar energy into chemical energy. Recently, increasing attention has been given to metal halide perovskite (MHP) photocatalysts because of the development of stabilization strategies for MHPs under reaction conditions. From this perspective, we first describe several substantial breakthroughs in the photocatalytic application of MHPs. Performance trends in the solar fuel production applications of MHPs, including photocatalytic H2 generation and photocatalytic CO2 reduction reactions, are then described. Recent developments to extend the use of MHPs to various photocatalytic organic transformations are also highlighted. Finally, we propose several scientific challenges for the practical implications of MHPs for solar fuel production and various photoreactions.
Collapse
Affiliation(s)
- Sunghak Park
- Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
- Soft Foundry, Seoul National University, Seoul 08826, Republic of Korea
| | - Seungwoo Choi
- Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
| | - Sungho Kim
- Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
| | - Ki Tae Nam
- Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
- Soft Foundry, Seoul National University, Seoul 08826, Republic of Korea
| |
Collapse
|
30
|
Peng H, Wang X, Zhang Z, Tian Y, Xiao Y, Hu J, Wang J, Zou B. Bulk assembly of a 0D organic tin(ii)chloride hybrid with high anti-water stability. Chem Commun (Camb) 2021; 57:8162-8165. [PMID: 34318799 DOI: 10.1039/d1cc02814f] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
A lead-free compound, (TBAC)SnCl3 (TBAC = tetrabutylammonium chloride), with high anti-water stability was reported, which can be stable in water for 24 hours. Upon photoexcitation, this compound exhibits a green photoluminescence (PL) centered at 523 nm with a larger Stokes shift of 260 nm at room temperature (RT), stemming from self-trapped exciton (STE) emission.
Collapse
Affiliation(s)
- Hui Peng
- Beijing Key Laboratory of Nanophotonics & Ultrafine Optoelectronic Systems, Beijing Institute of Technology, Beijing 100081, China
| | | | | | | | | | | | | | | |
Collapse
|
31
|
Ouhbi H, Ambrosio F, De Angelis F, Wiktor J. Strong Electron Localization in Tin Halide Perovskites. J Phys Chem Lett 2021; 12:5339-5343. [PMID: 34062062 PMCID: PMC8280731 DOI: 10.1021/acs.jpclett.1c01326] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/23/2021] [Accepted: 05/27/2021] [Indexed: 06/12/2023]
Abstract
Tin halide perovskites (THPs) have been established as a lower-toxicity alternative to lead halide perovskites. In spite of the increasing interest, the behavior of photoexcited charges has not been well understood in this class of materials. We here investigate the behavior of excess electrons in a series of tin halide perovskites by employing advanced electronic-structure calculations. We first focus on CsSnBr3 and show that electron localization is favorable in this compound and that bipolaronic states are the most stable form of self-trapped electrons. We then extend the analysis to CsSnI3, CsSnCl3, MASnBr3, FASnBr3, and DMASnBr3 and show that electron bipolarons are stable in all these compounds, thus indicating that strong electron localization is recurrent in THPs.
Collapse
Affiliation(s)
- Hassan Ouhbi
- Department
of Physics, Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
| | - Francesco Ambrosio
- Computational
Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimicie “Giulio Natta”
(CNR-SCITEC), Via Elce
di Sotto 8, 06123 Perugia, Italy
- CNST@Polimi,
Istituto Italiano di Tecnologia, Via Pascoli 70/3, Milano, Italy
| | - Filippo De Angelis
- Computational
Laboratory for Hybrid/Organic Photovoltaics (CLHYO), Istituto CNR di Scienze e Tecnologie Chimicie “Giulio Natta”
(CNR-SCITEC), Via Elce
di Sotto 8, 06123 Perugia, Italy
- Department
of Chemistry, Biology and Biotechnology, University of Perugia, Via Elce di Sotto 8, 06123 Perugia, Italy
- CompuNet, Istituto Italiano di Tecnologia, Via Morego 30, 16163 Genova, Italy
| | - Julia Wiktor
- Department
of Physics, Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
| |
Collapse
|
32
|
Tang D, Shao C, Jiang S, Sun C, Song S. Graphitic C 2N 3: An Allotrope of g-C 3N 4 Containing Active Azide Pentagons as Metal-Free Photocatalyst for Abundant H 2 Bubble Evolution. ACS NANO 2021; 15:7208-7215. [PMID: 33871961 DOI: 10.1021/acsnano.1c00477] [Citation(s) in RCA: 30] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
A g-C3N4 allotrope, a curved leaf-like graphitic C2N3 (g-C2N3) with an intrinsic spontaneous polarization electric field (ISPEF), has been constructed for efficient solar energy conversion into H2 energy via photocatalytic H2O splitting. The curved leaf-like π-delocalization g-C2N3 was composed of aromatic azide pentagons and normal triazine hexagons obtained by cycloaddition between -C≡N groups from dicyandiamide polymerization and azide from the heat-treated polypyrrole fibers. Under light irradiation (λ > 420 nm), photo-generated charges are driven to separate efficiently and transfer from bulk to active sites of the surface under ISPEF that is opposite to the Coulomb field. Consequently, without any cocatalyst, g-C3N4 allotrope demonstrates a very high H2-production activity of 14.9 mmol g-1 h-1 accompanied by a lot of H2 bubbles, which is 2.6 times of g-C3N4 loading with Pt. In comparison with the reported metal-free photocatalysts or those supported with noble metals, g-C3N4 allotrope (i.e., leaf-like g-C2N3) is confirmed to be the best metal-free photocatalyst for H2O splitting into H2 fuel so far. The contructed leaf-like g-C2N3 with SPEF supplies a suitable platform for solar energy conversion into H2 fuel, which actively contributes to clean energy production.
Collapse
Affiliation(s)
- Dongmei Tang
- School of Material Science and Chemical Engineering, Ningbo University, Fenghua Road 818, Ningbo 315211, People's Republic of China
| | - Chengtian Shao
- Department of Chemistry, Chung Yuan Christian University, Taoyuan City 32033, Taiwan
| | - Shujuan Jiang
- School of Material Science and Chemical Engineering, Ningbo University, Fenghua Road 818, Ningbo 315211, People's Republic of China
| | - Chuanzhi Sun
- College of Chemistry, Chemical Engineering and Materials Science, Shandong Provincial Key Laboratory of Clean Production of Fine Chemicals, Shandong Normal University, Jinan 250014, People's Republic of China
| | - Shaoqing Song
- School of Material Science and Chemical Engineering, Ningbo University, Fenghua Road 818, Ningbo 315211, People's Republic of China
| |
Collapse
|
33
|
Armenise V, Colella S, Fracassi F, Listorti A. Lead-Free Metal Halide Perovskites for Hydrogen Evolution from Aqueous Solutions. NANOMATERIALS 2021; 11:nano11020433. [PMID: 33572127 PMCID: PMC7915764 DOI: 10.3390/nano11020433] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/20/2021] [Revised: 02/01/2021] [Accepted: 02/04/2021] [Indexed: 11/16/2022]
Abstract
Metal halide perovskites (MHPs) exploitation represents the next big frontier in photovoltaic technologies. However, the extraordinary optoelectronic properties of these materials also call for alternative utilizations, such as in solar-driven photocatalysis, to better address the big challenges ahead for eco-sustainable human activities. In this contest the recent reports on MHPs structures, especially those stable in aqueous solutions, suggest the exciting possibility for efficient solar-driven perovskite-based hydrogen (H2) production. In this minireview such works are critically analyzed and classified according to their mechanism and working conditions. We focus on lead-free materials, because of the environmental issue represented by lead containing material, especially if exploited in aqueous medium, thus it is important to avoid its presence from the technology take-off. Particular emphasis is dedicated to the materials composition/structure impacting on this catalytic process. The rationalization of the distinctive traits characterizing MHPs-based H2 production could assist the future expansion of the field, supporting the path towards a new class of light-driven catalysts working in aqueous environments.
Collapse
Affiliation(s)
- Vincenza Armenise
- Department of Chemistry, University of Bari “Aldo Moro”, via Orabona 4, 70126 Bari, Italy; (V.A.); (F.F.)
| | - Silvia Colella
- CNR NANOTEC Institute of Nanotechnology, Via Amendola, 122/D, 70126 Bari, Italy;
| | - Francesco Fracassi
- Department of Chemistry, University of Bari “Aldo Moro”, via Orabona 4, 70126 Bari, Italy; (V.A.); (F.F.)
- CNR NANOTEC Institute of Nanotechnology, Via Amendola, 122/D, 70126 Bari, Italy;
| | - Andrea Listorti
- Department of Chemistry, University of Bari “Aldo Moro”, via Orabona 4, 70126 Bari, Italy; (V.A.); (F.F.)
- Correspondence: ; Tel.: +39-080-5442009
| |
Collapse
|
34
|
Carbon Nitride-Perovskite Composites: Evaluation and Optimization of Photocatalytic Hydrogen Evolution in Saccharides Aqueous Solution. Catalysts 2020. [DOI: 10.3390/catal10111259] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
The application of hybrid photocatalysts made of carbon nitride and lead-free perovskites, namely DMASnBr3/g-C3N4 and PEA2SnBr4/g-C3N4, for the H2 evolution from saccharides aqueous solution is described. The novel composites were tested and compared in terms of hydrogen evolution rate (HER) under simulated solar light, using Pt as a reference co-catalyst, and glucose as a representative sacrificial biomass. The conditions were optimized to maximize H2 generation by a design of experiments involving catalyst amount, glucose concentration and Pt loading. For both materials, such parameters affected significantly H2 photogeneration, with the best performance observed using 0.5 g L−1 catalyst, 0.2 M glucose and 0.5 wt% Pt. Under optimized conditions, DMASnBr3/g-C3N4 showed a 5-fold higher HER compared to PEA2SnBr4/g-C3N4, i.e., 925 µmoles g−1 h−1 and 190 µmoles g−1 h−1, respectively (RSD ≤ 11%, n = 4). The former composite, which affords an HER 15-fold higher in aqueous glucose than in neat water, provided H2 also with no metal co-catalyst (around 140 µmoles g−1 h−1), and it was reusable for at least three photoreactions. Encouraging results were also collected by explorative tests on raw starch solution (around 150 µmoles g−1 h−1).
Collapse
|