A meta-Selective C-H Alumination of Mono-Substituted Benzene by Using An Alkyl-Substituted Al Anion through Hydride-Eliminating SN Ar Reaction

Alumanyl Reduction, Reductive Coupling and C-H Isomerization of Organic Nitriles

The behavior of the potassium alumanyl, [{SiNDipp}AlK]2 ({SiNDipp} = {CH2SiMe2N(Dipp)}2; Dipp = 2,6-i-Pr2C6H3), toward organic nitriles has been investigated. In common with earlier studies of the reactivity of charge neutral Al(I) species with multiply bonded small molecules, it is suggested that the initial step in all the reactions involves [2 + 1] cycloaddition and the generation of an [η2-C=N-Al] alumina azacyclopropane unit. In the cases of o- and m-tolyl-substituted aryl nitriles, this species is too kinetically labile to allow its isolation and undergoes C-C coupling via immediate Al-C/C≡N insertion to yield the alumina diazabutadiene derivatives. In contrast, the increased steric profile of alkyl nitriles imposes a marked influence on the nature of the products formed. Consistent with the proposed sequential pathway, reaction of [{SiNDipp}AlK]2 with t-BuCN provides an isolable alumina cyclopropane species that is kinetically resistant to onward reaction with a further nitrile equivalent. While reduction in the alkyl nitrile steric demands by use of i-PrCN again facilitates C-C bond formation, the crowding of the Al center by the resultant alumina-diazabutadienediide moiety appears to be beyond the limit of kinetic viability, resulting in an unusual 2-fold C-H to N-H isomerization from one of the C-iso-propyl substituents and the isolation of a 1-alumina-2,5-diazabutadiene structure.

Catalyst-Free Regioselective Diborylation of Aryllithium with Tetra(o-tolyl)diborane(4)

A catalyst-free 1,2-diborylation of aryllithium with tetra(o-tolyl)diborane(4) has been achieved, giving a series of 1,2-diborylaryl lithium species in excellent yields under mild reaction conditions, which leads to 1,2-di(tolyl)borylarenes in 60-91 % yields upon treatment with the hydride-abstracting reagent. In these transformations, one sp2 C-H of arene is activated and both boryl units are utilized to build two new (sp2 )C-B bonds. This represents a new strategy for selective arene diborylation. Density functional theory (DFT) calculations suggest that an aromatic nucleophilic substitution is a key step in the formation of the products.

Mechanochemical Synthesis of Non-Solvated Dialkylalumanyl Anion and XPS Characterization of Al(I) and Al(II) Species

A non-solvated alkyl-substituted Al(I) anion dimer was synthesized by a reduction of haloalumane precursor using a mechanochemical method. The crystallographic and theoretical analysis revealed its structure and electronic properties. Experimental XPS analysis of the Al(I) anions with reference compounds revealed the lower Al 2p binding energy corresponds to the lower oxidation state of Al species. It should be emphasized that the experimentally obtained XPS binding energies were reproduced by delta SCF calculations and were linearly correlated with NPA charges and 2p orbital energies.

Main group metal-mediated strategies for C-H and C-F bond activation and functionalisation of fluoroarenes

With fluoroaromatic compounds increasingly employed as scaffolds in agrochemicals and active pharmaceutical ingredients, the development of methods which facilitate regioselective functionalisation of their C-H and C-F bonds is a frontier of modern synthesis. Along with classical lithiation and nucleophilic aromatic substitution protocols, the vast majority of research efforts have focused on transition metal-mediated transformations enabled by the redox versatilities of these systems. Breaking new ground in this area, recent advances in main group metal chemistry have delineated unique ways in which s-block, Al, Ga and Zn metal complexes can activate this important type of fluorinated molecule. Underpinned by chemical cooperativity, these advances include either the use of heterobimetallic complexes where the combined effect of two metals within a single ligand set enables regioselective low polarity C-H metalation; or the use of novel low valent main group metal complexes supported by special stabilising ligands to induce C-F bond activations. Merging these two different approaches, this Perspective provides an overview of the emerging concept of main-group metal mediated C-H/C-F functionalisation of fluoroarenes. Showcasing the untapped potential that these systems can offer in these processes; focus is placed on how special chemical cooperation is established and how the trapping of key reaction intermediates can inform mechanistic understanding.

Dearomatization of C6 Aromatic Hydrocarbons by Main Group Complexes

The dearomatization reaction is a powerful method for transformation of simple aromatic compounds to unique chemical architectures rapidly in synthetic chemistry. Over the past decades, the chemistry in this field has evolved significantly and various important organic compounds such as crucial bioactive molecules have been synthesized through dearomatization. In general, photochemical conditions or assistance by transition metals are required for dearomatization of rigid arenes. Recently, main-group elements, especially naturally abundant elements in the Earth's crust, have attracted attention as they have low toxicity and are cost-effective compared to the late transition metals. In recent decades, a variety of low-valent main-group molecules, which enable the activation of stable aromatic compounds under mild conditions, have been developed. This minireview highlights the developments in the chemistry of dearomatization of C6 aromatic hydrocarbons by main-group compounds leading to the formation of seven-membered EC6 (E=main-group elements) ring or cycloaddition products.

Seven-Membered Cyclic Diamidoalumanyls of Heavier Alkali Metals: Structures and C-H Activation of Arenes

Like the previously reported potassium-based system, rubidium and cesium reduction of [{SiNDipp}AlI] ({SiNDipp} = {CH2SiMe2NDipp}2) with the heavier alkali metals [M = Rb and Cs] provides dimeric group 1 alumanyl derivatives, [{SiNDipp}AlM]2. In contrast, similar treatment with sodium results in over-reduction and incorporation of a formal equivalent of [{SiNDipp}Na2] into the resultant sodium alumanyl species. The dimeric K, Rb, and Cs compounds display a variable efficacy toward the C-H oxidative addition of arene C-H bonds at elevated temperatures (Cs > Rb > K, 110 °C) to yield (hydrido)(organo)aluminate species. Consistent with the synthetic experimental observations, computational (DFT) assessment of the benzene C-H activation indicates that rate-determining attack of the Al(I) nucleophile within the dimeric species is facilitated by π-engagement of the arene with the electrophilic M+ cation, which becomes increasingly favorable as group 1 is descended.

Controlled reductive C-C coupling of isocyanides promoted by an aluminyl anion

We report the reaction of the potassium aluminyl, K[Al(NON)] ([NON]^2- = [O(SiMe₂NDipp)₂]^2-, Dipp = 2,6-iPr₂C₆H₃) with a series of isocyanide substrates (R-NC). In the case of tBu-NC, degradation of the isocyanide was observed generating an isomeric mixture of the corresponding aluminium cyanido-κC and -κN compounds, K[Al(NON)(H)(CN)]/K[Al(NON)(H)(NC)]. The reaction with 2,6-dimethylphenyl isocyanide (Dmp-NC), gave a C₃-homologation product, which in addition to C-C bond formation showed dearomatisation of one of the aromatic substituents. In contrast, using adamantyl isocyanide Ad-NC allowed both the C₂- and C₃-homologation products to be isolated, allowing a degree of control to be exercised over the chain growth process. These data also show that the reaction proceeds through a stepwise addition, supported in this study by the synthesis of the mixed [(Ad-NC)₂(Dmp-NC)]^2- product. Computational analysis of the bonding within the homologised products confirm a high degree of multiple bond character in the exocyclic ketenimine units of the C₂- and C₃-products. In addition, the mechanism of chain growth was investigated, identifying different possible pathways leading to the observed products, and highlighting the importance of the potassium cation in formation of the initial C₂-chain.

Evidence of AlII Radical Addition to Benzene

Electrophilic Al^III species have long dominated the aluminum reactivity towards arenes. Recently, nucleophilic low-valent Al^I aluminyl anions have showcased oxidative additions towards arenes C-C and/or C-H bonds. Herein, we communicate compelling evidence of an Al^II radical addition reaction to the benzene ring. The electron reduction of a ligand stabilized precursor with KC₈ in benzene furnishes a double addition to the benzene ring instead of a C-H bond activation, producing the corresponding cyclohexa-1,3(orl,4)-dienes as Birch-type reduction product. X-ray crystallographic analysis, EPR spectroscopy, and DFT results suggest this reactivity proceeds through a stable Al^II radical intermediate, whose stability is a consequence of a rigid scaffold in combination with strong steric protection.

The emerging chemistry of the aluminyl anion

The chemistry of low valent p-block metal complexes continues to elicit interest in the research community, demonstrating reactivity that replicates and in some cases exceeds that of their more widely studied d-block metal counterparts. The introduction of the first aluminyl anion, a complex containing a formally anionic Al(I) centre charge balanced by an alkali metal (AM) cation, has established a platform for a new area of chemical research. The chemistry displayed by aluminyl compounds is expanding rapidly, with examples of reactivity towards a diverse range of small molecules and functional groups now reported in the literature. Herein we present an account of the structure and reactivity of the growing family of aluminyl compounds. In this context we examine the structural relationships between the aluminyl anion and the AM cations, which now include examples of AM = Li, Na, K, Rb and Cs. We report on the ability of these compounds to engage in bond-breaking and bond-forming reactions, which is leading towards their application as useful reagents in chemical synthesis. Furthermore we discuss the chemistry of bimetallic complexes containing direct Al-M bonds (M = Li, Na, K, Mg, Ca, Cu, Ag, Au, Zn) and compounds with Al-E multiple bonds (E = NR, CR₂, O, S, Se, Te), where both classes of compound are derived directly from aluminyl anions.

Al-Sc Bonded Complexes: Synthesis, Structure, and Reaction with Benzene in the Presence of Alkyl Halide

An alumanyl anion possessing N,N'-bis(2,6-diisopropylphenyl)-1,3-propanediamine ligand was synthesized and characterized. Transmetalation of this Al anion with diaminoscandium chloride precursors afforded the corresponding Al-Sc complexes possessing an unprecedented Al-Sc bond. The Al-Sc[N(SiMe₃)₂] complex underwent intramolecular C-H cleavage to form a bridged dinuclear complex with μ-hydrido and μ-methylene ligands. The Al-Sc(NⁱPr₂)₂ complex reacted with benzene in the presence of alkyl bromide to furnish a 1,4-dialuminated cyclohexadiene product with a concomitant formation of the alkyl-alkyl coupled product. Although the latter product seems to form through the radical mechanism, DFT calculations revealed an ionic mechanism involving bimetallic reaction pathways to react with alkyl bromide and benzene, which provides new insight into the chemistry of metal-metal bonded compounds.

C-H Activation of Inert Arenes using a Photochemically Activated Guanidinato-Magnesium(I) Compound

UV irradiation of solutions of a guanidinate coordinated dimagnesium(I) compound, [{(Priso)Mg}2 ] 3 (Priso=[(DipN)2 CNPri 2 ]- , Dip=2,6-diisopropylphenyl), in either benzene, toluene, the three isomers of xylene, or mesitylene, leads to facile activation of an aromatic C-H bond of the solvent in all cases, and formation of aryl/hydride bridged magnesium(II) products, [{(Priso)Mg}2 (μ-H)(μ-Ar)] 4-9. In contrast to similar reactions reported for β-diketiminate coordinated counterparts of 3, these C-H activations proceed with little regioselectivity, though they are considerably faster. Reaction of 3 with an excess of the pyridine, p-NC5 H4 But (pyBut ), gave [(Priso)Mg(pyBut H)(pyBut )2 ] 10, presumably via reduction of the pyridine to yield a radical intermediate, [(Priso)Mg(pyBut ⋅)(pyBut )2 ] 11, which then abstracts a proton from the reaction solvent or a reactant. DFT calculations suggest two possible pathways to the observed arene C-H activations. One of these involves photochemical cleavage of the Mg-Mg bond of 3, generating magnesium(I) doublet radicals, (Priso)Mg⋅. These then doubly reduce the arene substrate to give "Birch-like" products, which subsequently rearrange via C-H activation of the arene. Circumstantial evidence for the photochemical generation of transient magnesium radical species includes the fact that irradiation of a cyclohexane solution of 3 leads to an intramolecular aliphatic C-H activation process and formation of an alkyl-bridged magnesium(II) species, [{Mg(μ-Priso-H )}2 ] 12. Furthermore, irradiation of a 1 : 1 mixture of 3 and the β-diketiminato dimagnesium(I) compound, [{(Dip Nacnac)Mg}2 ] (Dip Nacnac=[HC(MeCNDip)2 ]- ), effects a "scrambling" reaction, and the near quantitative formation of an unsymmetrical dimagnesium(I) compound, [(Priso)Mg-Mg(Dip Nacnac)] 13. Finally, the EPR spectrum (77 K) of a glassed solution of UV irradiated 3 is dominated by a broad featureless signal, indicating the presence of a doublet radical species.

Synthesis of a low-valent Al4+ cluster cation salt

Low-valent aluminium compounds are very reactive main-group species and have therefore been widely investigated. Since the isolation of a stable molecular Al(I) compound in 1991, [(AlCp*)₄] (Cp* = [C₅Me₅]^-), a variety of highly reactive neutral or anionic low-valent aluminium complexes have been developed. By contrast, their cationic counterparts have remained difficult to access. Here, we report the synthesis of [Al(AlCp*)₃]⁺[Al(OR^F)₄]^- (R^F = C(CF₃)₃) through a simple metathesis reaction between [(AlCp*)₄] and Li[Al(OR^F)₄]. Unexpectedly, the [Al(AlCp*)₃]⁺ salt forms a dimer in the solid state and concentrated solutions. Addition of Lewis bases results in monomerization and coordination to the unique formal Al⁺ atom, giving [(L)_xAl(AlCp*)₃]⁺ salts where L is hexaphenylcarbodiphosphorane (x = 1), tetramethylethylenediamine (x = 1) or 4-dimethylaminopyridine (x = 3). The Al⁺-Al_Cp* bonds in the resulting [(L)_xAl(AlCp*)₃]⁺ cluster cations can be finely tuned between very strong (with no ligand L) to very weak and approaching isolated [Al(L)₃]⁺ ions (when L is dimethylaminopyridine).

Alkali metal influences in aluminyl complexes

The previously reported potassium aluminyl complex [(BDI-H)Al^-K⁺]₂ was converted in Li⁺ or Na⁺ salts by a salt metathesis reaction with Li(BPh₄) or Na(BPh₄), respectively; BDI-H = dianionic [(DIPP)N-C(Me)C(H)-C(CH₂)-N(DIPP)^2-] and DIPP = 2,6-diisopropylphenyl. The Rb and Cs aluminyl complexes were obtained by reaction of (BDI)Al with RbC₈ or CsC₈; BDI = HC[C(Me)N(DIPP)]₂. Crystal structures of two monomers, (BDI-H)Al^-Li⁺·(Et₂O)₂ and (BDI-H)Al^-Na⁺·(Et₂O)(TMEDA), and four dimers [(BDI-H)Al^-M⁺]₂ (M = Li, Na, Rb, Cs) are discussed. Lewis base-free dimers [(BDI-H)Al^-M⁺]₂ crystallize either as slipped dimers (Li⁺, Na⁺) in which each Al center features only one Al-M contact or as a symmetric dimer (K⁺, Rb⁺, Cs⁺) in which the cation bridges both Al centers. The dimer with the largest cation (Cs⁺) shows Cs⋯CH₂C interactions between dimers, resulting in a coordination polymer. AIM and charge analysis reveal highly ionic Al-M bonds with strong polarization of the Al lone-pair towards the smaller cation Li⁺ and Na⁺. The Al-M bonds become weaker from Li to Cs. Calculated dimerization energies suggest that in apolar solvents only complexes with the heavier metals Rb and Cs may be in a monomer-dimer equilibrium. This is confirmed by DOSY measurements in benzene. Dimeric aluminyl complexes with heavier alkali metals (K-Cs) react with benzene to give a double C-H activation in para-positions.

A Tetraorganyl-Alumaborane with An Al-B σ-Bond and Two Adjacent Lewis-Acidic Centers

A tetraorganyl-alumaborane (3) that contains an Al-B bond and twisted Al and B planes was synthesized and structurally characterized. UV-vis absorption spectroscopy, electrochemical measurement, and DFT calculations were employed to reveal the electronic properties of 3. The reactivity of 3 toward DMSO and CO was studied to demonstrate its deoxygenating abilities. On the basis of the results of the DFT calculations, a detailed reaction mechanism was developed, which highlighted the important role of the distinct Lewis acidity of the group-13 elements Al and B in 3.

Remote steric control for undirected meta-selective C-H activation of arenes

Regioselective functionalization of arenes remains a challenging problem in organic synthesis. Steric interactions are often used to block sites adjacent to a given substituent, but they do not distinguish the remaining remote sites. We report a strategy based on remote steric control, whereby a roof-like ligand protects the distant para site in addition to the ortho sites, and thereby enables selective activation of meta carbon-hydrogen (C-H) bonds in the absence of ortho or para substituents. We demonstrate this concept for iridium-catalyzed meta-selective borylation of various monosubstituted arenes, including complex drug molecules. This strategy has the potential to expand the toolbox of C-H bond functionalization to previously nondifferentiable reaction sites.

Rubidium and caesium aluminyls: synthesis, structures and reactivity in C-H bond activation of benzene

Expanding knowledge of low valent aluminium chemistry, rubidium and caesium aluminyls are reported to complete the group 1 (Li-Cs) set of metal aluminyls. Both compounds crystallize as a contacted dimeric pair supported by M⋯π(arene) interactions with a pronounced twist between aluminyl units. Density functional theory calculations show symmetrical bonding between the M and Al atoms, with an Al centred lone-pair donating into vacant Rb and Cs orbitals. Interestingly, despite their structural similarity the Cs aluminyl enables C-H bond activation of benzene, but not the Rb aluminyl reflecting the importance of the alkali metal in these heterobimetallic systems.

Alumination of aryl methyl ethers: switching between sp2 and sp3 C-O bond functionalisation with Pd-catalysis

The reaction of [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl) with aryl methyl ethers proceeded with alumination of the sp³ C-O bond. The selectivity of this reaction could be switched by inclusion of a catalyst. In the presence of [Pd(PCy₃)₂], chemoselective sp² C-O bond functionalisation was observed. Kinetic isotope experiments and DFT calculations support a catalytic pathway involving the ligand-assisted oxidative addition of the sp² C-O bond to a Pd-Al intermetallic complex.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Seven-Membered Cyclic Potassium Diamidoalumanyls

The seven-membered cyclic potassium alumanyl species, [{SiN^Mes }AlK]₂ [{SiN^Mes }={CH₂ SiMe₂ N(Mes)}₂ ; Mes=2,4,6-Me₃ C₆ H₂ ], which adopts a dimeric structure supported by flanking K-aryl interactions, has been isolated either by direct reduction of the iodide precursor, [{SiN^Mes }AlI], or in a stepwise manner via the intermediate dialumane, [{SiN^Mes }Al]₂ . Although the intermediate dialumane has not been observed by reduction of a Dipp-substituted analogue (Dipp=2,6-i-Pr₂ C₆ H₃ ), partial oxidation of the potassium alumanyl species, [{SiN^Dipp }AlK]₂ , where {SiN^Dipp }={CH₂ SiMe₂ N(Dipp)}₂ , provided the extremely encumbered dialumane [{SiN^Dipp }Al]₂ . [{SiN^Dipp }AlK]₂ reacts with toluene by reductive activation of a methyl C(sp³ )-H bond to provide the benzyl hydridoaluminate, [{SiN^Dipp }AlH(CH₂ Ph)]K, and as a nucleophile with BPh₃ and RN=C=NR (R=i-Pr, Cy) to yield the respective Al-B- and Al-C-bonded potassium aluminaborate and alumina-amidinate products. The dimeric structure of [{SiN^Dipp }AlK]₂ can be disrupted by partial or complete sequestration of potassium. Equimolar reactions with 18-crown-6 result in the corresponding monomeric potassium alumanyl, [{SiN^Dipp }Al-K(18-cr-6)], which provides a rare example of a direct Al-K contact. In contrast, complete encapsulation of the potassium cation of [{SiN^Dipp }AlK]₂ , either by an excess of 18-cr-6 or 2,2,2-cryptand, allows the respective isolation of bright orange charge-separated species comprising the 'free' [{SiN^Dipp }Al]^- alumanyl anion. Density functional theory (DFT) calculations performed on this moiety indicate HOMO-LUMO energy gaps in the of order 200-250 kJ mol^-1 .

Factors Controlling the Aluminum(I)-meta-Selective C-H Activation in Arenes

The so far poorly understood factors controlling the complete meta-selectivity observed in the C-H activation reactions of alkylarenes promoted by aluminyl anions have been explored in detail by means of Density Functional Theory calculations. To this end, a combination of state-of-the-art computational methods, namely the activation strain model of reactivity and energy decomposition analysis, has been applied to quantitatively unveil the origin of the selectivity of the transformation as well as the influence of the associated potassium cation. It is found that the selectivity takes place during the initial nucleophilic addition step where the key LP(Al)→π*(C=C) molecular orbital interaction is more stabilizing for the meta-pathway, which results in a stronger interaction between the reactants along the entire transformation.

Dihydrogen Activation by Lithium- and Sodium-Aluminyls

To date, aluminyl anions have been exclusively isolated as their potassium salts. We report herein the synthesis of the lithium and sodium aluminyls, M₂ [Al(NON^Dipp )]₂ (M=Li, Na. NON^Dipp =[O(SiMe₂ NDipp)₂ ]^2- ; Dipp=2,6-iPr₂ C₆ H₃ ). Both compounds crystallize from non-coordinating solvent as "slipped" contacted dimeric pairs with strong M⋅⋅⋅π(aryl) interactions. Isolation from Et₂ O solution affords the monomeric ion pairs (NON^Dipp )Al-M(Et₂ O)₂ , which contain discrete Al-Li and Al-Na bonds. The ability of the full series of Li, Na and K aluminyls to activate dihydrogen is reported.

Hydroarylation of olefins catalysed by a dimeric ytterbium(II) alkyl

Although the nucleophilic alkylation of aromatics has recently been achieved with a variety of potent main group reagents, all of this reactivity is limited to a stoichiometric regime. We now report that the ytterbium(II) hydride, [BDIDippYbH]2 (BDIDipp = CH[C(CH3)NDipp]2, Dipp = 2,6-diisopropylphenyl), reacts with ethene and propene to provide the ytterbium(II) n-alkyls, [BDIDippYbR]2 (R = Et or Pr), both of which alkylate benzene at room temperature. Density functional theory (DFT) calculations indicate that this latter process operates through the nucleophilic (SN2) displacement of hydride, while the resultant regeneration of [BDIDippYbH]2 facilitates further reaction with ethene or propene and enables the direct catalytic (anti-Markovnikov) hydroarylation of both alkenes with a benzene C-H bond.

Oxidative Addition of Hydridic, Protic, and Nonpolar E-H Bonds (E = Si, P, N, or O) to an Aluminyl Anion

The aluminyl anion K[Al(NON^Dipp)] {NON^Dipp = [O(SiMe₂NDipp)₂]^2-; Dipp = 2,6-iPr₂C₆H₃} engages in oxidative additions with the E-H (E = Si, P, N, or O) bonds of phenylsilane (PhSiH₃), mesityl phosphane (MesPH₂; Mes = 2,4,6-Me₃C₆H₂), 2,6-di-iso-propylaniline (DippNH₂), and 2,6-di-tert-butyl-4-methylphenol (ArOH). The resulting (hydrido)aluminate salts are formed regardless of the E-H bond polarity. All of the products were characterized by nuclear magnetic resonance and infrared spectroscopic techniques and single-crystal X-ray diffraction. This study highlights the versatility of aluminyl anions to activate hydridic, acidic, and (essentially) nonpolar E-H bonds.

Double insertion of CO2 into an Al–Te multiple bond

Two equivalents of CO₂ react with a terminal Al–Te bond to form the tellurodicarbonate ligand.

Catalytic C-H to C-M (M = Al, Mg) bond transformations with heterometallic complexes

C-H functionalisation is one of the cornerstones of modern catalysis and remains a topic of contemporary interest due its high efficiency and atom-economy. Among these reactions, C-H borylation, that is the transformation of C-H to C-B bonds, has experienced a fast development because of the wide utility of organoboron reagents as synthetic intermediates. The mechanistic background is now well-understood and the role of transition metal boryl or σ-borane intermediates in this transformation is well documented. This mini-review focuses on efforts made by our group, and others, to establish palladium- and calcium-catalysed methods for C-H metalation employing heavier main group elements (M = Al, Mg). These are new catalytic reactions first accomplished in our group that we have termed C-H alumination and magnesiation respectively. Unusual heterometallic complexes have been identified as key on-cycle intermediates and their unique reactivity is discussed in the context of new catalytic pathways for C-H functionalisation. Hence, this mini-review summarises the recent progress in the area of C-H metalation reactions as well as the new opportunities that may arise from this concept.