A Surface‐Strained and Geometry‐Tailored Nanoreactor that Promotes Ammonia Electrosynthesis

Repairable body-centered cubic Fe0 anchoring on porous hollow nitrogen-doped carbon spheres with adjusting electron distribution for efficient electrocatalytic ammonia synthesis

Electrocatalytic nitrogen reduction reaction (ENRR) is a promising and efficient method for ammonia production. However, ENRR is restricted by the adsorption and activation of N2. Herein, an efficient nitrogen reduction reaction (NRR) electrocatalyst loaded with zero valent iron (ZVI) particles onto porous nitrogen-doped carbon (NC) hollow spheres is reported. The optimal Fe@10N3C-950 exhibits excellent performance with high ammonia (NH3) yield (152.28 µg h-1 mgcat-1) and Faradaic efficiency (FE, 54.55 %) at - 0.3 V (versus reversible hydrogen electrode, vs. RHE). Bader charge shows that the adsorbed N2 acquires more electrons from Fe sites with body-centered cubic (BCC) structure to better activate N2. Moreover, i-t experiments are performed before electrocatalytic NH3 production to effectively eliminate the effect of oxidation on ZVI and thus, maintain high ENRR activity for Fe@10N3C-950. Theoretical calculations indicate that nitrogen doping not only reduces the Gibbs free energy of rate determining step (RDS), but the BCC-structured Fe can also decrease the energy barriers of N2 activation and RDS.

Ce-doped copper oxide and copper vanadate Cu3VO4 hybrid for boosting nitrate electroreduction to ammonia

The electrocatalytic nitrate reduction to ammonia reaction (ENO3RR) holds great potential as a cost-effective method for synthesizing ammonia. This work designed a cerium (Ce) doped Cu2+1O/Cu3VO4 catalyst. The coupling of vanadium-based oxides with Cu2+1O effectively adjusts the catalyst's electronic structure, addressing the inherent issues of limited activity and low conductivity in typical copper-based oxides; moreover, Ce doping generates oxygen vacancies (Ov), providing more active sites and thereby enhancing the ENO3RR performance. The catalyst exhibits superior NH3Faradaic efficiency (93.7 %) with a NH3 yield of 18.905 mg h-1 cm-2at -0.5 V vs. RHE under alkaline conditions. This study provides guidance for the design of highly efficient catalysts for ENO3RR.

Recent progress on Ti-based catalysts in the electrochemical synthesis of ammonia

Electrochemical ammonia synthesis presents a sustainable alternative, offering the potential for enhanced energy efficiency and environmental benefits compared to the conventional Haber-Bosch process. In recent years, the electrocatalytic reduction of nitrate to ammonia (NO3-RR) has emerged as a crucial approach for achieving sustainable NH3 production. To enhance energy efficiency and successfully convert NO3- to NH3, it is essential to investigate cost-effective electrocatalysts that provide high Faraday efficiency and demonstrate adequate stability. Ti-based materials are considered ideal candidates as catalysts due to their environmental friendliness and robust stability. This review initially summarizes the nitrate reduction reaction pathway and concisely discusses the impact of the potential intermediates and reaction steps on the overall reaction efficiency and product selectivity. Subsequently, an overview of the fundamental characteristics of Ti and TiO2 is presented. Additionally, the research process on Ti-based electrocatalysts in the electrochemical reduction of nitrate for ammonia synthesis is summarized. Finally, the design strategies, such as heteroatom doping and the introduction of oxygen vacancies, to enhance catalytic efficiency and selectivity are presented. Through this comprehensive review, we endeavor to furnish researchers with the most recent insights into the application of titanium-based electrocatalysts in nitrate reduction reactions and to stimulate innovative thought processes on the electrocatalytic synthesis of ammonia.

Single Entity Electrocatalysis

Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.

In Situ Characterization Techniques for Electrochemical Nitrogen Reduction Reaction

The electrochemical reduction of nitrogen to produce ammonia is pivotal in modern society due to its environmental friendliness and the substantial influence that ammonia has on food, chemicals, and energy. However, the current electrochemical nitrogen reduction reaction (NRR) mechanism is still imperfect, which seriously impedes the development of NRR. In situ characterization techniques offer insight into the alterations taking place at the electrode/electrolyte interface throughout the NRR process, thereby helping us to explore the NRR mechanism in-depth and ultimately promote the development of efficient catalytic systems for NRR. Herein, we introduce the popular theories and mechanisms of the electrochemical NRR and provide an extensive overview on the application of various in situ characterization approaches for on-site detection of reaction intermediates and catalyst transformations during electrocatalytic NRR processes, including different optical techniques, X-ray-based techniques, electron microscopy, and scanning probe microscopy. Finally, some major challenges and future directions of these in situ techniques are proposed.

Advancements in Electrocatalytic Nitrogen Reduction: A Comprehensive Review of Single-Atom Catalysts for Sustainable Ammonia Synthesis

Electrocatalytic nitrogen reduction technology seamlessly aligns with the principles of environmentally friendly chemical production. In this paper, a comprehensive review of recent advancements in electrocatalytic NH3 synthesis utilizing single-atom catalysts (SACs) is offered. Into the research and applications of three categories of SACs: noble metals (Ru, Au, Rh, Ag), transition metals (Fe, Mo, Cr, Co, Sn, Y, Nb), and nonmetallic catalysts (B) in the context of electrocatalytic ammonia synthesis is delved. In-depth insights into the material preparation methods, single-atom coordination patterns, and the characteristics of the nitrogen reduction reaction (NRR) are provided. The systematic comparison of the nitrogen reduction capabilities of various SAC types offers a comprehensive research framework for their integration into electrocatalytic NRR. Additionally, the challenges, potential solutions, and future prospects of incorporating SACs into electrocatalytic nitrogen reduction endeavors are discussed.

Effect of Facet on Local Electron Density of Oxygen Vacancy in Catalysts for Nitrogen Electro-Reduction

Oxygen-vacancy (Ov) engineering is an effective strategy to manipulate the electronic configuration of catalysts for electrochemical nitrogen reduction reaction (eNRR). The influence of the stable facet on the electronic configuration of Ov is widely studied, however, the effect of the reactive facet on the local electron density of Ov is unveiled. In this work, an eNRR electrode R(111)-TiO2/HGO is provided with a high proportion exposed reactive facet (111) of rutile-TiO2 (denoted as R(111)-TiO2) nanocrystals with Ov anchored in hierarchically porous graphite oxide (HGO) nanofilms. The R(111)-TiO2/HGO exhibits excellent eNRR performance with an NH3 yield rate of 20.68 µg h-1 cm-2, which is ≈20 times the control electrode with the most stable facet (110) exposed (R(110)-TiO2/HGO). The experimental data and theoretical simulations reveal that the crystal facet (111) has a positive effect on regulating the local electron density around the oxygen vacancy and the two adjacent Ti-sites, promoting the π-back-donation, minimizing the eNRR barrier, and transforming the rate determination step to *NNH→*NNHH. This work illuminates the effect of crystal facet on the performance of eNRR, and offers a novel strategy to design efficient eNRR catalysts.

Enzymatic Mesoporous Metal Nanocavities for Concurrent Electrocatalysis of Nitrate to Ammonia Coupled with Polyethylene Terephthalate Upcycling

Electrochemical upcycling of waste pollutants into high value-added fuels and/or chemicals is recognized as a green and sustainable solution that can address the resource utilization on earth. Despite great efforts, their progress has seriously been hindered by the lack of high-performance electrocatalysts. In this work, bimetallic PdCu mesoporous nanocavities (MCs) are reported as a new bifunctional enzymatic electrocatalyst that realizes concurrent electrocatalytic upcycling of nitrate wastewater and polyethylene terephthalate (PET) plastic waste. Abundant metal mesopores and open nanocavities of PdCu MCs provide the enzymatic confinement of key intermediates for the deeper electroreduction of nitrate and accelerate the transport of reactants/products within/out of electrocatalyst, thus affording high ammonia Faradic efficiency (FENH3) of 96.6% and yield rate of 5.6 mg h-1 mg-1 at the cathode. Meanwhile, PdCu MC nanozymes trigger the selective electrooxidation of PET-derived ethylene glycol (EG) into glycolic acid (GA) and formic acid with high FEs of >90% by a facile regulation of potentials at the anode. Moreover, concurrent electrosynthesis of value-added NH3 and GA is disclosed in the two-electrode coupling system, further confirming the high efficiency of bifunctional PdCu MC nanozymes in producing value-added fuels and chemicals from waste pollutants in a sustainable manner.

Revealing the Adsorption Behavior of Nitrogen Reduction Reaction on Strained Ti2 CO2 by a Spin-Polarized d-band Center Model

Electrocatalytic reduction of dinitrogen to ammonia has attracted significant research interest. Herein, it reports the boosting performance of electrocatalytic nitrogen reduction on Ti2 CO2 MXene with an oxygen vacancy through biaxial tensile strain engineering. Specifically, tensile strain modified electronic structures and formation energy of oxygen vacancy are evaluated. The exposed Ti atoms with additional electron states near the Fermi level serve as active site for intermediate adsorption, leading to superior catalytic performance (Ulimit = -0.44 V) under 2.5% biaxial tensile strain through a distal mechanism. However, the two sides of the "Sabatier optimum" in volcano plot are not limited by two different electronic steps, but are induced by the diverse adsorption behaviors of intermediates. Crucially, the "Sabatier optimum" results from the different response speeds of the adsorption energy for *N2 and *NNH to strains. Moreover, the authors observe conventional d-band adsorption for *N2 and *NNH, non-linear adsorption for *NNH2 , and abnormal d-band adsorption for *N, *NH, *NH2 , and *NH3 , which can be explained by the competition between attractive orbital hybridization and repulsive orbital orthogonalization with the spin-polarized d-band model, which further clarifies the contributions of 3σ → dz2 and dxz /dyz → 2π* to the overall population of bonding and anti-bonding states.

Lattice Strain Engineering of Ni2 P Enables Efficient Catalytic Hydrazine Oxidation-Assisted Hydrogen Production

Hydrazine-assisted water electrolysis provides new opportunities to enable energy-saving hydrogen production while solving the issue of hydrazine pollution. Here, the synthesis of compressively strained Ni2 P as a bifunctional electrocatalyst for boosting both the anodic hydrazine oxidation reaction (HzOR) and cathodic hydrogen evolution reaction (HER) is reported. Different from a multistep synthetic method that induces lattice strain by creating core-shell structures, a facile strategy is developed to tune the strain of Ni2 P via dual-cation co-doping. The obtained Ni2 P with a compressive strain of -3.62% exhibits significantly enhanced activity for both the HzOR and HER than counterparts with tensile strain and without strain. Consequently, the optimized Ni2 P delivers current densities of 10 and 100 mA cm-2 at small cell voltages of 0.16 and 0.39 V for hydrazine-assisted water electrolysis, respectively. Density functional theory (DFT) calculations reveal that the compressive strain promotes water dissociation and concurrently tunes the adsorption strength of hydrogen intermediates, thereby facilitating the HER process on Ni2 P. As for the HzOR, the compressive strain reduces the energy barrier of the potential-determining step for the dehydrogenation of *N2 H4 to *N2 H3 . Clearly, this work paves a facile pathway to the synthesis of lattice-strained electrocatalysts via the dual-cation co-doping.

Eliminating Concentration Polarization with Cationic Covalent Organic Polymer to Promote Effective Overpotential of Nitrogen Fixation

Electrocatalytic nitrogen reduction reaction offers a sustainable alternative to the conventional Haber-Bosch process. However, it is currently restricted by low effective overpotential due to the concentration polarization, which arises from accumulated products, ammonium, at the reaction interface. Here, a novel covalent organic polymer with ordered periodic cationic sites is proposed to tackle this challenge. The whole network exhibits strong positive charge and effectively repels the positively charged ammonium, enabling an ultra-low interfacial product concentration, and successfully driving the reaction equilibrium to the forward direction. With the given potential unchanged, the suppressed overpotential can be much liberated, ultimately leading to a continuous high-level reaction rate. As expected, when this tailored microenvironment is coupled with a transition metal-based catalyst, a 24-fold improvement is generated in the Faradaic efficiency (73.74 %) as compared with the bare one. The proposed strategy underscores the importance of optimizing dynamic processes as a means of improving overall performance in electrochemical syntheses.

Constructing Oxygen Vacancies via Engineering Heterostructured Fe3 C/Fe3 O4 Catalysts for Electrochemical Ammonia Synthesis

Electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions provides an intriguing pathway to convert N2 into NH3 . However, significant kinetic barriers of the NRR at low temperatures in desirable aqueous electrolytes remain a grand challenge due to the inert N≡N bond of the N2 molecule. Herein, we propose a unique strategy for in situ oxygen vacancy construction to address the significant trade-off between N2 adsorption and NH3 desorption by building a hollow shell structured Fe3 C/Fe3 O4 heterojunction coated with carbon frameworks (Fe3 C/Fe3 O4 @C). In the heterostructure, the Fe3 C triggers the oxygen vacancies of the Fe3 O4 component, which are likely active sites for the NRR. The design could optimize the adsorption strength of the N2 and Nx Hy intermediates, thus boosting the catalytic activity for the NRR. This work highlights the significance of the interaction between defect and interface engineering for regulating electrocatalytic properties of heterostructured catalysts for the challenging NRR. It could motivate an in-depth exploration to advance N2 reduction to ammonia.

Oxygen Vacancy Engineering of Fe-Doped NiMoO4 for Electrocatalytic N2 Fixation to NH3

Electrochemical nitrogen reduction reaction (NRR) is a promising method for ammonia synthesis under ambient conditions. However, the NRR performance is limited to an extremely strong N≡N bond in N2 and the competing hydrogen evolution reaction. Introducing oxygen vacancies (OVs) has been considered as a forceful means to accelerate the sluggish NRR reaction kinetics. Herein, we reported the design of Fe-doped NiMoO4 catalysts for NRR. Fe doping can increase the amount of OVs in the catalyst and contribute to lattice strain enhancement, thereby leading to the improvement of the electron transport rate and catalytic active for NRR. In 0.1 M Na2SO4 solution, the 5% Fe-NiMoO4 catalyst achieves a NH3 yield rate of 15.36 μg h-1 mgcat.-1 and a Faradaic efficiency of 26.85% under -0.5 V versus RHE. Furthermore, the 5% Fe-NiMoO4 catalyst exhibits excellent stability (up to 13 h) during the reaction.

A multifunctional copper single-atom electrocatalyst aerogel for smart sensing and producing ammonia from nitrate

Despite modern chemistry's success in providing affordable fertilizers for feeding the population and supporting the ammonia industry, ineffective nitrogen management has led to pollution of water resources and air, contributing to climate change. Here, we report a multifunctional copper single-atom electrocatalyst-based aerogel (Cu SAA) that integrates the multiscale structure of coordinated single-atomic sites and 3D channel frameworks. The Cu SAA demonstrates an impressive faradaic efficiency of 87% for NH3 synthesis, as well as remarkable sensing performance with detection limits of 0.15 ppm for NO3- and 1.19 ppm for NH4+. These multifunctional features enable precise control and conversion of nitrate to ammonia in the catalytic process, facilitating accurate regulation of the ammonium and nitrate ratios in fertilizers. We thus designed the Cu SAA into a smart and sustainable fertilizing system (SSFS), a prototype device for on-site automatic recycling of nutrients with precisely controlled nitrate/ammonium concentrations. The SSFS represents a forward step toward sustainable nutrient/waste recycling, thus permitting efficient nitrogen utilization of crops and mitigating pollutant emissions. This contribution exemplifies how electrocatalysis and nanotechnology can be potentially leveraged to enable sustainable agriculture.

Strain-Engineering of Mesoporous Cs3 Bi2 Br9 /BiVO4 S-Scheme Heterojunction for Efficient CO2 Photoreduction

Slow charge kinetics and unfavorable CO₂ adsorption/activation strongly inhibit CO₂ photoreduction. In this study, a strain-engineered Cs₃ Bi₂ Br₉ /hierarchically porous BiVO₄ (s-CBB/HP-BVO) heterojunction with improved charge separation and tailored CO₂ adsorption/activation capability is developed. Density functional theory calculations suggest that the presence of tensile strain in Cs₃ Bi₂ Br₉ can significantly downshift the p-band center of the active Bi atoms, which enhances the adsorption/activation of inert CO₂ . Meanwhile, in situ irradiation X-ray photoelectron spectroscopy and electron spin resonance confirm that efficient charge transfer occurs in s-CBB/HP-BVO following an S-scheme with built-in electric field acceleration. Therefore, the well-designed s-CBB/HP-BVO heterojunction exhibits a boosted photocatalytic activity, with a total electron consumption rate of 70.63 µmol g^-1 h^-1 , and 79.66% selectivity of CO production. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy reveals that CO₂ photoreduction undergoes a formaldehyde-mediated reaction process. This work provides insight into strain engineering to improve the photocatalytic performance of halide perovskite.

Size-Defined Ru Nanoclusters Supported by TiO2 Nanotubes Enable Low-Concentration Nitrate Electroreduction to Ammonia with Suppressed Hydrogen Evolution

Anthropogenic nitrate pollution has an adverse impact on the environment and human health. As part of a sustainable nitrate management strategy, electrochemical denitrification is studied as an innovative strategy for nutrients recycling and recovering. It is, however, challenging to selectively electro-reduce nitrate with low-concentration for ammonia. Herein, the photo-deposition of size-defined Ru nanoclusters (NCs, average size: ≈1.66 nm) on TiO₂ nanotubes (NTs) is demonstrated, which show improved performance for nitrate-to-ammonia electroreduction with a maximum yield rate of ≈600 µg h^-1  cm^-2 and a faradic efficiency (FE) of > 90.0% across a broad range of potentials in comparison with electrodeposited Ru nanoparticles (NPs, average size: ≈23.78 nm) on TiO₂ NTs. Experimental and theoretical evidence further suggests the small-size Ru NCs with the intrinsically enhanced selectivity and activity because of the strong metal/substrate interaction and unsaturated coordination state. The findings highlight the size effect on Ru-based catalyst supported on metal oxides, a versatile catalytic model, which allows the regulation of hydrogen adsorption to favor ammonia production over the competing hydrogen evolution reaction.

High-Spatiotemporal-Resolution Electrochemical Measurements of Electrocatalytic Reactivity

The real-time measurement of the individual or local electrocatalytic reactivity of catalyst particles instead of ensemble behavior is considerably challenging but very critical to uncover fundamental insights into catalytic mechanisms. Recent remarkable efforts have been made to the development of high-spatiotemporal-resolution electrochemical techniques, which allow the imaging of the topography and reactivity of fast electron-transfer processes at the nanoscale. This Perspective summarizes emerging powerful electrochemical measurement techniques for studying various electrocatalytic reactions on different types of catalysts. Principles of scanning electrochemical microscopy, scanning electrochemical cell microscopy, single-entity measurement, and molecular probing technique have been discussed for the purpose of measuring important parameters in electrocatalysis. We further demonstrate recent advances in these techniques that reveal quantitative information about the thermodynamic and kinetic properties of catalysts for various electrocatalytic reactions associated with our perspectives. Future research on the next-generation electrochemical techniques is anticipated to be focused on the development of instrumentation, correlative multimodal techniques, and new applications, thus enabling new opportunities for elucidating structure-reactivity relationships and dynamic information at the single active-site level.

Pulsed Nitrate-to-Ammonia Electroreduction Facilitated by Tandem Catalysis of Nitrite Intermediates

Electroreduction of nitrate to ammonia offers a promising pathway for nutrient recycling and recovery from wastewater with energy and environmental sustainability. There have been considerable efforts on the regulation of reaction pathways to facilitate nitrate-to-ammonia conversion over the competing hydrogen evolution reaction but only with limited success. Here, we report a Cu single-atom gel (Cu SAG) electrocatalyst that produces NH₃ from both nitrate and nitrite under neutral conditions. Given the unique mechanism of NO₂^- activation on Cu SAGs with spatial confinement and strengthened kinetics, a pulse electrolysis strategy is presented to cascade the accumulation and conversion of NO₂^- intermediates during NO₃^- reduction with the prohibited competition from the hydrogen evolution reaction, thus substantially enhancing the Faradaic efficiency and the yield rate for ammonia production compared with constant potential electrolysis. This work underlines the cooperative approach of the pulse electrolysis and SAGs with three-dimensional (3D) framework structures for highly efficient nitrate-to-ammonia conversion enabled by tandem catalysis of unfavorable intermediates.

Light Field-Enhanced Single-Site Cu Electrocatalyst for Nitrogen Fixation

Direct electrocatalytic reduction of N₂ to NH₃ under mild conditions is attracting considerable interests but still remains enormous challenges in terms of respect of intrinsic catalytic activity and limited electrocatalytic efficiency. Herein, a photo-enhanced strategy is developed to improve the NRR activity on Cu single atoms catalysts. The atomically dispersed Cu single atoms supported TiO₂ nanosheets (Cu SAs/TiO₂ ) achieve a Faradaic Efficiency (12.88%) and NH₃ yield rate (6.26 µg h^-1 mg_cat ^-1 ) at -0.05 V versus RHE under the light irradiation field, in which NH₃ yield rate is fivefold higher than that under pure electrocatalytic nitrogen reduction reaction (NRR) process and is remarkably superior in comparison to most of the similar type electrocatalysts. The existence of external light field improves electron transfer ability between CuO and TiO, and thus optimizes the accumulation of surface charges on Cu sites, endowing more electrons involved in nitrogen fixation. This work reveals an atomic-scale mechanistic understanding of field effect-enhanced electrochemical performance of catalysts and it provides predictive guidelines for the rational design of photo-enhanced electrochemical N₂ reduction catalysts.

Achievements, Challenges, and Perspectives on Nitrogen Electrochemistry for Carbon-Neutral Energy Technologies

Unrestrained anthropogenic activities have severely disrupted the global natural nitrogen cycle, causing numerous energy and environmental issues. Electrocatalytic nitrogen transformation is a feasible and promising strategy for achieving a sustainable nitrogen economy. Synergistically combining multiple nitrogen reactions can realize efficient renewable energy storage and conversion, restore the global nitrogen balance, and remediate environmental crises. Here, we provide a unique aspect to discuss the intriguing nitrogen electrochemistry by linking three essential nitrogen-containing compounds (i.e., N₂ , NH₃ , and NO₃ ^- ) and integrating four essential electrochemical reactions, i.e., the nitrogen reduction reaction (N₂ RR), nitrogen oxidation reaction (N₂ OR), nitrate reduction reaction (NO₃ RR), and ammonia oxidation reaction (NH₃ OR). This minireview also summarizes the acquired knowledge of rational catalyst design and underlying reaction mechanisms for these interlinked nitrogen reactions. We further underscore the associated clean energy technologies and a sustainable nitrogen-based economy.

Selective NOx- Electroreduction to Ammonia on Isolated Ru Sites

Nitrate and nitrite (NO_x^-) are widespread contaminants in industrial wastewater and groundwater. Sustainable ammonia (NH₃) production via NO_x^- electroreduction provides a prospective alternative to the energy-intensive industrialized Haber-Bosch process. However, selectively regulating the reaction pathway, which involves complicated electron/proton transfer, toward NH₃ generation relies on the robust catalyst. A specific consideration in designing selective NO_x^--to-NH₃ catalysts should meet the criteria to suppress competing hydrogen evolution and avoid the presence of neighboring active sites that are in favor of adverse N-N coupling. Nevertheless, efforts in this regard are still inadequate. Herein, we demonstrate that isolated ruthenium sites can selectively reduce NO_x^- into NH₃, with maximal Faradaic efficiencies of 97.8% (NO₂^- reduction) and 72.8% (NO₃^- reduction) at -0.6 and -0.4 V, respectively. Density functional theory calculations simulated the reaction mechanisms and identified the *NO → *NOH as the potential rate-limiting step for NO_x^--to-NH₃ conversion on single-atom Ru sites.

Amorphous NiFe Oxide-based Nanoreactors for Efficient Electrocatalytic Water Oxidation

Synergy engineering is an important way to enhance the kinetic activity of oxygen-evolution-reaction (OER) electrocatalysts. Here, we fabricated NiFe amorphous nanoreactor (NiFe-ANR) oxide as OER electrocatalysts via a mild self-catalytic reaction. Firstly, the amorphousness helps transform NiFe-ANR into highly active hydroxyhydroxides, and its many fine-grain boundaries increase active sites. More importantly, as proved by experiments and finite element analysis, the nanoreactor structure alters the spatial curvature and the mass transfer over the catalyst, thereby enriching OH^- in the catalyst surface and inner part. Thus, the catalyst with the structure of amorphous nanoreactors gained excellent activity, far superior to the NiFe catalyst with the structure of crystalline nanoreactor or amorphous non-nanoreactor. This work provides new insights into the applications and mechanisms of amorphousness and nanoreactors, embodying the "1+1>2" synergy of crystalline state and morphology.

Unifying the Nitrogen Reduction Activity of Anatase and Rutile TiO2 Surfaces

TiO₂ is a model transition metal oxide that has been applied frequently in both photocatalytic and electrocatalytic nitrogen reduction reactions (NRR). However, the phase which is more NRR active still remains a puzzle. This work presents a theoretical study on the NRR activity of the (001), (100), (101), and (110) surfaces of both anatase and rutile TiO₂ . We found that perfect surfaces are not active for NRR, while the oxygen vacancy can promote the reaction by providing excess electrons and low-coordinated Ti atoms that enhance the binding of the key intermediate (HNN*). The NRR activity of the eight facets can be unified into a single scaling line. The anatase TiO₂ (101) and rutile TiO₂ (101) surfaces were found to be the most and the second most active surfaces with a limiting potential of -0.91 V and -0.95 V respectively, suggesting that the TiO₂ NRR activity is not very phase-sensitive. For photocatalytic NRR, the results suggest that the anatase TiO₂ (101) surface is still the most active facet. We further found that the binding strength of key intermediates scale well with the formation energy of oxygen vacancy, which is determined by the oxygen coordination number and the degree of relaxation of the surface after the creation of oxygen vacancy. This work provides a comprehensive understanding of the activity of TiO₂ surfaces. The results should be helpful for the design of more efficient TiO₂ -based NRR catalysts.

Fe-VS2 Electrocatalyst with Organic Matrix-Mediated Electron Transfer for Highly Efficient Nitrogen Fixation

Electrochemical N₂ fixation is considered to be a promising alternative to Haber-Bosch technology. Inspired by the composition and structure of natural nitrogenase, Fe-doped VS₂ nanosheets were prepared via one-step solvothermal method. The electron transfer system mediated by organic conductive polymer (1-AAQ-PA) was constructed to promote the electron transfer between Fe-VS₂ nanosheets and the electrode in electrocatalytic N₂ reduction reaction (NRR). The obtained 1-AAQ-PA-Fe-VS₂ electrode converted N₂ to NH₃ with a yield of 31.6 μg h^-1  mg^-1 at -0.35 V vs. reversible hydrogen electrode and high faradaic efficiency of 23.5 %. The introduction of Fe dopants favored N₂ adsorption and activation, while the Li-S bond between Fe-VS₂ and Li₂ SO₄ effectively inhibited hydrogen evolution. The highly efficient electron utilization in the electrocatalytic NRR process was realized using the 1-AAQ-PA as the electron transfer medium. Density functional theory calculations showed that N₂ was preferentially adsorbed on Fe and reduced to NH₃ via both distal and alternating mechanism.

Lattice-Confined Single-Atom Fe1 Sx on Mesoporous TiO2 for Boosting Ambient Electrocatalytic N2 Reduction Reaction

Mimicking natural nitrogenase to create highly efficient single-atom catalysts (SACs) for ambient N₂ fixation is highly desired, but still challenging. Herein, S-coordinated Fe SACs on mesoporous TiO₂ have been constructed by a lattice-confined strategy. The extended X-ray absorption fine structure and X-ray photoelectron spectroscopy spectra demonstrate that Fe atoms are anchored in TiO₂ lattice via the FeS₂ O₂ coordination configuration. Theoretical calculations reveal that FeS₂ O₂ sites are the active centers for electrocatalytic nitrogen reduction reaction (NRR). Moreover, the finite element analysis shows that confinement of opened and ordered mesopores can facilitate the mass transport and offer an enlarged active surface area for NRR. As a result, this catalyst delivers a favorable NH₃ yield rate of 18.3 μg h^-1  mg_cat. ^-1 with a high Faradaic efficiency of 17.3 % at -0.20 V versus a reversible hydrogen electrode. Most importantly, this lattice-confined strategy is universal and can also be applied to Ni₁ S_x @TiO₂ , Co₁ S_x @TiO₂ , Mo₁ S_x @TiO₂ , and Cu₁ S_x @TiO₂ SACs. Our study provides new hints for the design and biomimetic synthesis of highly efficient NRR electrocatalysts.

Strain-boosted hyperoxic graphene oxide efficiently loading and improving performances of microcystinase

Harmful Microcystis blooms (HMBs) and microcystins (MCs) that are produced by Microcystis seriously threaten water ecosystems and human health. This study demonstrates an eco-friendly strategy for simultaneous removal of MCs and HMBs by adopting unique hyperoxic graphene oxides (HGOs) as carrier and pure microcystinase A (PMlrA) as connecting bridge to form stable HGOs@MlrA composite. After oxidation, HGOs yield inherent structural strain effects for boosting the immobilization of MlrA by material characterization and density functional theory calculations. HGO₅ exhibits higher loading capacities for crude MlrA (1,559 mg·g⁻¹) and pure MlrA (1,659 mg·g⁻¹). Moreover, the performances of HGO₅@MlrA composite, including the capability of removing MCs and HMBs, the ecological and human safety compared to MlrA or HGO₅ treatment alone, have been studied. These results indicate that HGO₅ can be used as a promising candidate material to effectively improve the application potential of MlrA in the simultaneous removal of MCs and HMBs.

•

Hyperoxic graphene oxide (HGO₅) provides inherent strain effects

•

HGO₅ exhibits an impressive loading capacity for MlrA

•

A new assembly mechanism for the HGO₅@MlrA composite is proposed

•

HGO₅@MlrA composite shows excellent capability and ecological safety

Lithiated interface of Pt/TiO2 enables an efficient wire-shaped Zn-Air solar micro-battery

We report a wire-shaped bifunctional oxygen photoelectrode by integrating Li-doped TiO₂ nanotubes and Pt nanoclusters. Conductive nanoshells have been identified at the lithiated interface of Pt/TiO₂, which facilitates the performance of oxygen catalysis. Thus, the assembled Zn-air micro-battery with solar-assisted charging greatly improves the voltage efficiency compared with the conventional state-of-the-art catalyst as the air electrode.

Emerging Electrochemical Techniques for Probing Site Behavior in Single-Atom Electrocatalysts

Single-atom catalysts (SACs) have aroused tremendous interest over the past decade, particularly in the community of energy and environment-related electrocatalysis. A rapidly growing number of recent publications have recognized it as a promising candidate with maximum atomic utilization, distinct activity, and selectivity in comparison to bulk catalysts and nanocatalysts. However, the complexity of localized coordination environments and the dispersion of isolated sites lead to significant difficulties when it comes to gaining insight into the intrinsic behavior of electrocatalytic reactions. Furthermore, the low metal loadings of most SACs make conventional ensemble measurements less likely to be accurate on the subnanoscale. Thus, it remains challenging to probe the activity and properties of individual atomic sites by available commercial instruments and analytical methods. In spite of this, continuing efforts have lately focused on the development of advanced measurement methodologies, which are very useful to the fundamental understanding of SACs. There have recently been a number of in situ/operando techniques applied to SACs, such as electron microscopy, spectroscopy, and other analysis methods, which support relevant functions to identify the active sites and reaction intermediates and to investigate the dynamic behavior of localized structures of the catalytic sites.This Account aims to present recent electrochemical probing techniques which can be used to identify single-atomic catalytic sites within solid supports. First, we describe the basic principles of molecular probe methods for the study and analysis of electrocatalytic site behavior. In particular, the in situ probing technique enabled by surface interrogation scanning electrochemical microscopy (SI-SECM) can measure the active site density and kinetic rate with high resolution. An alternative electrochemical probing technique is further demonstrated on the basis of single-entity electrochemistry, which allows the unique electrochemical imaging of the size and catalytic rate of single atoms, molecules, and clusters. The merits and limitations of different electrochemical techniques are then discussed, along with perspectives for future prospects. Apart from this, we further showcase the powerful capability of emerging electrochemical probing techniques for determining significant effects and properties of SACs for various electrocatalytic reactions, including oxygen reduction and evolution, hydrogen evolution, and nitrate reduction. Overall, electrochemical techniques with atomic resolution have greatly increased opportunities for observing, measuring, and understanding the surface and interface chemistry during energy conversion. In the future, it is anticipated that the development of electrochemical probing techniques will be advanced with innovative perspectives on the behavior and features of SACs. We hope that this Account can contribute in several ways to promoting the fundamental knowledge and technical progress of emerging electrochemical measurements for studying SACs.

Porous Two-dimensional Iron-Cyano Nanosheets for High-rate Electrochemical Nitrate Reduction

Ammonia (NH₃) is an essential ingredient in agriculture and a promising source of clean energy as a hydrogen carrier. The current major method for ammonia production, however, is the Haber-Bosch process that leads to massive energy consumption and severe environmental issues. Compared with nitrogen (N₂) reduction, electrochemical nitrate reduction reaction (NO₃RR), with a higher NH₃ yield rate and Faradaic efficiency, holds promise for efficient NH₃ production under ambient conditions. To achieve efficient NO₃RR, electrocatalysts should exhibit high selectivity and Faradaic efficiency with a high NH₃ yield rate. In this work, we developed two-dimensional (2D) iron-based cyano-coordination polymer nanosheets (Fe-cyano NSs) following in situ electrochemical treatment for high-rate NO₃RR. Owing to the strong adsorption of nitrate on Fe⁰ active sites generated via topotactic conversion and in situ electroreduction, 2D Fe-cyano electrocatalyst exhibits high catalytic activity with a yield rate of 42.1 mg h^-1 mg_cat^-1 and a Faradaic efficiency of over 90% toward NH₃ production at -0.5 V (vs reversible hydrogen electrode, RHE). Further electrochemical characterizations revealed that superhydrophilic surface and enhanced electrochemical surface area of the 2D porous nanostructures also contributed to the high-rate NO₃RR activity. An electrolyzer toward NO₃RR and oxygen evolution reaction (OER) in a two-electrode configuration is constructed based on 2D Fe-cyano, achieving an energy efficiency of 26.2%. This work provides an alternative methodology toward topotactic conversion of transition metal nanosheets for NO₃RR and reveals the often-overlooked contribution of hydrophilicity of the catalysts for high-rate electrocatalysis.

Rational Synthesis and Regulation of Hollow Structural Materials for Electrocatalytic Nitrogen Reduction Reaction

The electrocatalytic nitrogen reduction reaction (NRR) is known as a promising mean of nitrogen fixation to mitigate the energy crisis and facilitate fertilizer production under mild circumstances. For electrocatalytic reactions, the design of efficient catalysts is conducive to reducing activation energy and accelerating lethargic dynamics. Among them, hollow structural materials possess cavities in their structures, which can slack off the escape rate of N2 and reaction intermediates, prolong the residence time of N2 , enrich the reaction intermediates' concentration, and shorten electron transportation path, thereby further enhancing their NRR activity. Here, the basic synthetic strategies of hollow structural materials are introduced first. Then, the recent breakthroughs in hollow structural materials as NRR catalysts are reviewed from the perspective of intrinsic, mesoscopic, and microscopic regulations, aiming to discuss how structures affect and improve the catalytic performance. Finally, the future research directions of hollow structural materials as NRR catalysts are discussed. This review is expected to provide an outlook for optimizing hollow structural NRR catalysts.

Atomically Dispersed Zinc(I) Active Sites to Accelerate Nitrogen Reduction Kinetics for Ammonia Electrosynthesis

Developing highly active and stable nitrogen reduction reaction (NRR) catalysts for NH₃ electrosynthesis remains challenging. Herein, an unusual NRR electrocatalyst is reported with a single Zn(I) site supported on hollow porous N-doped carbon nanofibers (Zn¹ N-C). The Zn¹ N-C nanofibers exhibit an outstanding NRR activity with a high NH₃ yield rate of ≈16.1 µg NH₃ h^-1 mg_cat ^-1 at -0.3 V and Faradaic efficiency (FE) of 11.8% in alkaline media, surpassing other previously reported carbon-based NRR electrocatalysts with transition metals atomically dispersed and nitrogen coordinated (TM-N_x ) sites. ¹⁵ N₂ isotope labeling experiments confirm that the feeding nitrogen gas is the only nitrogen source in the production of NH₃ . Structural characterization reveals that atomically dispersed Zn(I) sites with Zn-N₄ moieties are likely the active sites, and the nearby graphitic N site synergistically facilitates the NRR process. In situ attenuated total reflectance-Fourier transform infrared measurement and theoretical calculation elucidate that the formation of initial *NNH intermediate is the rate-limiting step during the NH₃ production. The graphitic N atoms adjacent to the tetracoordinate Zn-N₄ moieties could significantly lower the energy barrier for this step to accelerate hydrogenation kinetics duing the NRR.

Interconnecting 3D Conductive Networks with Nanostructured Iron/Iron Oxide Enables a High-Performance Flexible Battery

Aqueous Ni/Fe alkaline batteries with features of low cost and high safety show great potential for application in portable and wearable electronics. However, the poor kinetics of the Fe-based anode greatly limits the large-scale applications of Ni/Fe batteries. Herein, we report an interconnected 3D conductive network with carbon-coated nanostructured iron/iron oxide (3D-Fe/Fe₂O₃@C) as an efficient anode for a flexible Ni/Fe battery. A hydrogel precursor is used to molecularly link and confine Fe³⁺ to spatial networks, resulting in a uniform dispersion of Fe/Fe₂O₃-heterostructured nanoparticles. Theoretical investigations reveal regulated potential loss and improved delocalized carrier density as a result of carbon coating and the mixed metal/metal oxide structure. In addition to these merits, due to the regulated wettability and electroactive surface areas, the 3D-Fe/Fe₂O₃@C anode with a high mass loading delivers an extraordinary areal capacity of 3.07 mA h cm^-2, as well as the boosted rate capability and Coulombic efficiency. When coupled with the NiCo₂O₄ cathode, the flexible quasi-solid-state Ni/Fe battery exhibits an admirable energy density of 15.53 mW h cm^-3 and a maximum power density of 761.91 W h cm^-3. The good stability after 20,000 cycles and severe mechanical deformations of the as-fabricated Ni/Fe battery imply it as a promising flexible energy storage device for practical applications.

The activity evidence of Ti defect towards electrocatalytic N2reduction

Electrochemical N₂reduction reaction (NRR) for NH₃synthesis, which usually needs highly-efficient electrocatalysts for N₂activation, is a carbon-neutral alternation compared to the traditional Haber-Bosch process. Although Ti-based compounds is widely used as electrocatalysts, what Ti defect affects NRR activity is still illusive. In this work, our systematic density functional calculations on Ti defect-decorated titanium oxide disclose that the unsaturated-Ti with the orbital splitting of defect electron states is the necessary feature for N₂binding and activation, which can be further enhanced by increasing the splitting degree. The bonding/antibonding orbital population and projected density of states indicate that the nature of N₂binding and activation on Ti-defect site is attributed to the elimination of the bonding orbital population in the conduction bands and the formation of^*πback-bonding in the valence bands. For the whole NRR process, the synergy of Ti-defect and oxygen vacancy (V_O) promotes N₂reduction, and the required maximum energy input scales quite well with the adsorption strength of^*NNH. Finally, the formed volcano shape successfully predicts new candidate catalysts for ammonia synthesis, such as TiO₂combined V_Owith Ti interstitial or H atom. This work provides disclosure of the key elements on the rational design of Ti-based nanomaterial electrocatalysts for artificial N₂fixation.

Synergistic Effect of Active Sites of Double-Atom Catalysts for Nitrogen Reduction Reaction

Nitrogen fixation to produce ammonia is a vital process since nitrogen is an essential element for the human body. Industrial nitrogen fixation mainly relies on the Haber-Bosch process. However, this process requires huge energy consumption and leads to pollution emission. In this study, the behaviors of intermediates in the nitrogen reduction reaction (NRR) are investigated for fifteen double-atom catalysts (DACs) through density functional theory calculations, revealing that under the synergistic effect of active sites on appropriate DACs, intermediates can be adsorbed through different configurations according to the activity improvement needs. VFe-N-C shows the best catalytic activity for electrochemical NRR with a limiting potential of -0.36 V vs. the reversible hydrogen electrode. The proposed synergistic effect of active sites on DACs for NRR could provide a new method for design of NRR catalysts.

Ultradispersed Ir x Ni clusters as bifunctional electrocatalysts for high-efficiency water splitting in acid electrolytes

Design and synthesis of electrocatalysts with high activity and low cost is an important challenge for water splitting. We report a rapid and facile synthetic route to obtain Ir x Ni clusters via polyol reduction. The Ir x Ni clusters show excellent activity for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in acidic electrolytes. The optimized Ir2Ni/C clusters exhibit an electrochemical active area of 18.27 mF cm-2, with the overpotential of OER being 292 mV and HER being 30 mV at 10 mA cm-2, respectively. In addition, the Ir2Ni/C used as the cathode and anode for the H-type hydrolysis tank only needs 1.597 V cell voltages. The excellent electrocatalytic performance is mainly attributed to the synergistic effect between the metals and the ultra-fine particle size. This study provides a novel strategy that has a broad application for water splitting.

Nanoporous Nickel-Molybdenum Oxide with an Oxygen Vacancy for Electrocatalytic Nitrogen Fixation under Ambient Conditions

The electrochemical nitrogen reduction reaction (NRR) is regarded as a sustainable method for N₂ fixation. N₂ adsorption and N≡N cleavage are the main challenges for the NRR. Herein, we propose a potential approach to enhance N₂ activation via introducing oxygen vacancies (OVs) into nanoporous NiO/MoO₃. Nanoporous NiO/MoO₃ with OVs (np-OVs-NiO/MoO₃) is prepared by a two-step process of dealloying and solid-state reaction. np-OVs-NiO/MoO₃ exhibits a high NH₃ yield of 35.4 μg h^-1 mg_cat^-1 and a Faradaic efficiency (FE) of 10.3% in 0.1 M PBS solution. The introduction of OVs enhances the conductivity, N₂ adsorption, and catalytic performance of np-NiO/MoO₃. The dual-metal sites with OVs have a unique electronic structure in favor of the "π back-donation" behavior, which decreases the energy barrier of protonation steps and improves the whole NRR process. This approach provides new insight into the design of composite transition metal oxides with OVs for the NRR catalyst under ambient conditions.

CoOx/UiO-66 and NiO/UiO-66 heterostructures with UiO-66 frameworks for enhanced oxygen evolution reactions

In this study, CoO_x/UiO-66-300 and NiO/UiO-66-300 heterostructures achieved low OER overpotentials for an enhanced oxygen evolution reaction.