Dynamically Unveiling Metal-Nitrogen Coordination during Thermal Activation to Design High-Efficient Atomically Dispersed CoN4 Active Sites

Strain engineering of CoSANC catalyst toward enhancing the oxygen reduction reaction activity

Developing efficient and cost-effective platinum-group metal-free (PGMF) catalysts for the oxygen reduction reaction (ORR) is crucial for energy conversion and storage devices. Among these catalysts, metal-nitrogen-carbon (MNC) materials, particularly cobalt single-atom catalysts (CoSANC), show promise as ORR electrocatalysts. However, their ORR activity is often hindered by strong hydroxyl (OH) adsorption on the Co sites. While the impact of strain engineering on MNC electrocatalysts has been minimally explored, recent studies suggest its potential to enhance catalytic performance and optimize intrinsic activity in traditional bulk catalysts. In this context, we investigate the effect of surface strain on CoSANC for ORR activity and correlate substrate-strain-induced geometric distortions with catalytic activity using experimental and theoretical methods. The findings suggest that the d-band center gap of spin states (Δεd) may be a preferred descriptor for predicting strain-dependent ORR performance in MNC catalysts. Leveraging CoSANC moiety placed on a substrate with an average size of 1.0 μm, we achieve performance comparable to that of commercial Pt/C catalysts when used as a cathode catalyst in zinc-air batteries. This investigation unveils the structure-function relationship of MNC electrocatalysts regarding strain engineering and provides valuable insights for future ORR activity design and enhancement.

An Oriented Diffusion Strategy to Configure All-Region Ultrahigh-Density Metal Single Atoms for High-Capacity Sodium Storage

Single-atom metals (SAMs), despite being promising for high-utilization catalysis, biomedicine, and energy storage, usually suffer from limited catalytic performance caused by low metal loading. Herein, via an oriented diffusion strategy, all-region ultrahigh-loading (18.9 wt.%) Sn-SAMs over carbon nanorings matrix (Sn-SAMs@CNR) are initially achieved based on the transformation of a g-C3N4@SnO2@polydopamine ring-like nested structure. The formation process of Sn-SAMs involves a critical conversion from oxygen-coordination (SnO2) to nitrogen-coordination (Sn-N4) and simultaneous anti-Osterwalder ripening promoted under spatial confinement. Notably, the g-C3N4-derived N-containing gaseous intermediates dynamically drive the oriented diffusion (inside-out diffusion) of Sn-SAMs across the carbon nanorings, realizing an all-region ultrahigh loading of SAMs throughout the carbon matrix. This strategy is also applied to other metal materials (Fe, Co, Ni, Cu, and Sb), and features excellent universality. When applied as the anode for sodium-ion batteries, experimental analyses and theoretical calculations demonstrate that high-loading Sn-N4 active sites significantly optimize electron density distribution and improve reaction kinetics. Consequently, Sn-SAMs@CNR exhibits outstanding durability of 364 mAh g-1   even after 5000 cycles with an impressively low (0.00068%) capacity decay per cycle. This work opens up a universally new avenue for all-region ultrahigh loading of SAMs to carbon matrix for high-performance energy storage.

General and Facile Synthesis of Co/CoO Nanoparticals Supported by Nitrogen-Doped Graphenic Networks as Efficient Oxygen Electrocatalyst for Zn-Air Batteries

Reasonable design of low-cost, high-efficiency and stable bifunctional oxygen electrocatalysts is of great significance to improve the reaction efficiency of Zn-air batteries, which is still a huge challenge. Here, we report a highly efficient bifunctional oxygen electrocatalyst with three-dimensional (3D) N-doped graphene network-supported cobalt and cobalt oxide nanoparticles (Co/CoO-NG), which can be in situ synthesized by inducing metal ions on metal plates via graphene oxide as an inducer. This 3D network structure and open active center show excellent bifunctional oxygen electrocatalytic activity under alkaline conditions, and can be used as an air electrode in rechargeable Zn-air batteries, with significantly better power density (244.28 mW cm-2) and stability (over 340 h) than commercial Pt/C+RuO2 mixtures. This work is conducive to advancing the practical application of graphene-based materials as air electrodes for rechargeable zinc-air batteries.

Hf and Co Dual Single Atoms Co-Doped Carbon Catalyst Enhance the Oxygen Reduction Performance

Single-atom metal-doped M-N-C (M═Fe, Co, Mn, or Ni) catalysts exhibit excellent catalytic activity toward oxygen reduction reactions (ORR). However, their performance still has a large gap considering the demand for their practical applications. This study reports a high-performance dual single-atom doped carbon catalyst (HfCo-N-C), which is prepared by pyrolyzing Co and Hf co-doped ZIF-8 . Co and Hf are atomically dispersed in the carbon framework and coordinated with N to form Co-N4 and Hf-N4 active moieties. The synergetic effect between Co-N4 and Hf-N4 significantly enhance the catalytic activity and durability of the catalyst. In an acidic medium, the ORR half-wave potential (E1/2) of the catalyst is up to 0.82 V , which is much higher than that of the Co-N-C catalyst without Hf co-doping (0.80 V). The kinetic current density of the catalyst is up to 2.49 A cm-2 at 0.85 V , which is 1.74 times that of the Co-N-C catalyst without Hf co-doping. Moreover, the catalyst exhibits excellent cathodic performance in single proton exchange membrane fuel cells and Zn-air batteries. Furthermore, Hf co-doping can effectively suppress the formation of H2O2, resulting in significantly improved stability and durability.

Structural engineering of atomic catalysts for electrocatalysis

As a burgeoning category of heterogeneous catalysts, atomic catalysts have been extensively researched in the field of electrocatalysis. To satisfy different electrocatalytic reactions, single-atom catalysts (SACs), diatomic catalysts (DACs) and triatomic catalysts (TACs) have been successfully designed and synthesized, in which microenvironment structure regulation is the core to achieve high-efficiency catalytic activity and selectivity. In this review, the effect of the geometric and electronic structure of metal active centers on catalytic performance is systematically introduced, including substrates, central metal atoms, and the coordination environment. Then theoretical understanding of atomic catalysts for electrocatalysis is innovatively discussed, including synergistic effects, defect coupled spin state change and crystal field distortion spin state change. In addition, we propose the challenges to optimize atomic catalysts for electrocatalysis applications, including controlled synthesis, increasing the density of active sites, enhancing intrinsic activity, and improving the stability. Moreover, the structure-function relationships of atomic catalysts in the CO2 reduction reaction, nitrogen reduction reaction, oxygen reduction reaction, hydrogen evolution reaction, and oxygen evolution reaction are highlighted. To facilitate the development of high-performance atomic catalysts, several technical challenges and research orientations are put forward.

Designing and Engineering Atomically Dispersed Metal Catalysts for CO2 to CO Conversion: From Single to Dual Metal Sites

The electrochemical CO2 reduction reaction (CO2 RR) is a promising approach to achieving sustainable electrical-to-chemical energy conversion and storage while decarbonizing the emission-heavy industry. The carbon-supported, nitrogen-coordinated, and atomically dispersed metal sites are effective catalysts for CO generation due to their high activity, selectivity, and earth abundance. Here, we discuss progress, challenges, and opportunities for designing and engineering atomic metal catalysts from single to dual metal sites. Engineering single metal sites using a nitrogen-doped carbon model was highlighted to exclusively study the effect of carbon particle sizes, metal contents, and M-N bond structures in the form of MN4 moieties on catalytic activity and selectivity. The structure-property correlation was analyzed by combining experimental results with theoretical calculations to uncover the CO2 to CO conversion mechanisms. Furthermore, dual-metal site catalysts, inheriting the merits of single-metal sites, have emerged as a new frontier due to their potentially enhanced catalytic properties. Designing optimal dual metal site catalysts could offer additional sites to alter the surface adsorption to CO2 and various intermediates, thus breaking the scaling relationship limitation and activity-stability trade-off. The CO2 RR electrolysis in flow reactors was discussed to provide insights into the electrolyzer design with improved CO2 utilization, reaction kinetics, and mass transport.

Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)

This topical review focuses on the distinct role of carbon support coordination environment of single-atom catalysts (SACs) for electrocatalysis. The article begins with an overview of atomic coordination configurations in SACs, including a discussion of the advanced characterization techniques and simulation used for understanding the active sites. A summary of key electrocatalysis applications is then provided. These processes are oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO2 RR). The review then shifts to modulation of the metal atom-carbon coordination environments, focusing on nitrogen and other non-metal coordination through modulation at the first coordination shell and modulation in the second and higher coordination shells. Representative case studies are provided, starting with the classic four-nitrogen-coordinated single metal atom (MN4 ) based SACs. Bimetallic coordination models including homo-paired and hetero-paired active sites are also discussed, being categorized as emerging approaches. The theme of the discussions is the correlation between synthesis methods for selective doping, the carbon structure-electron configuration changes associated with the doping, the analytical techniques used to ascertain these changes, and the resultant electrocatalysis performance. Critical unanswered questions as well as promising underexplored research directions are identified.

Atomic Distance Engineering in Metal Catalysts to Regulate Catalytic Performance

It is very important to understand the structure-performance relationship of metal catalysts by adjusting the microstructure of catalysts at the atomic scale. The atomic distance has an essential influence on the composition of the environment of active metal atom, which is a key factor for the design of targeted catalysts with desired function. In this review, we discuss and summarize strategies for changing the atomic distance from three aspects and relate their effects on the reactivity of catalysts. First, the effects of regulating bond length between metal and coordination atom at one single-atom site on the catalytic performance are introduced. The bond lengths are affected by the strain effect of the support and high-shell doping and can evolve during the reaction. Next, the influence of the distance between single-atom sites on the catalytic performance is discussed. Due to the space matching of adsorption and electron transport, the catalytic performance can be adjusted with the shortening of site distance. In addition, the effect of the arrangement spacing of the surface metal active atoms on the catalytic performance of metal nanocatalysts is studied. Finally, a comprehensive summary and outlook of the relationship between atomic distance and catalytic performance is given.

Self-carbon-thermal-reduction strategy for boosting the Fenton-like activity of single Fe-N4 sites by carbon-defect engineering

Carbon-defect engineering in metal single-atom catalysts by simple and robust strategy, boosting their catalytic activity, and revealing the carbon defect-catalytic activity relationship are meaningful but challenging. Herein, we report a facile self-carbon-thermal-reduction strategy for carbon-defect engineering of single Fe-N4 sites in ZnO-Carbon nano-reactor, as efficient catalyst in Fenton-like reaction for degradation of phenol. The carbon vacancies are easily constructed adjacent to single Fe-N4 sites during synthesis, facilitating the formation of C-O bonding and lowering the energy barrier of rate-determining-step during degradation of phenol. Consequently, the catalyst Fe-NCv-900 with carbon vacancies exhibits a much improved activity than the Fe-NC-900 without abundant carbon vacancies, with 13.5 times improvement in the first-order rate constant of phenol degradation. The Fe-NCv-900 shows high activity (97% removal ratio of phenol in only 5 min), good recyclability and the wide-ranging pH universality (pH range 3-9). This work not only provides a rational strategy for improving the Fenton-like activity of metal single-atom catalysts, but also deepens the fundamental understanding on how periphery carbon environment affects the property and performance of metal-N4 sites.

Theoretical insights into the catalytic mechanism of propylene hydroformylation over Co-N-C materials

M-N-C was recently reported to be a high activity catalyst for hydroformylation compared with a metal nanocluster. However, the nature of M-N-C sites and the dominant path of propylene hydroformylation on M-N-C sites with different structures are poorly understood. In this work, five different Co-N-C models (Co-N3-C, Co-N4-C, 0N-bridged Co2-N6-C, 1N-bridged Co2-N7-C and 2N-bridged Co2-N6-C) were constructed to simulate the Co active sites with different coordination that may exist on the surface of MOF-derived Co-based carbon materials. DFT combined with kinetic Monte Carlo (kMC) methods were used to study the catalytic performance for hydroformylation of different Co-N-C models. The results of the DFT calculations show that the coordination number and mode of N atoms could regulate the electronic density of the Co sites. The electronic density of the Co sites further affects the catalytic activity. The higher the electronic density is, the lower the energy barrier for partial hydrogenation of propylene and CO insertion reactions. Besides, the catalytic activity is also affected by the strong interaction in closer neighboring Co atoms in some Co2-Nx-C models. The strong interaction affects the adsorption state and energy of species, which also reduces the overall reaction energy barrier. The kMC simulation results further showed that the dominant path of propylene hydroformylation was the n-butylaldehyde path for the 0N-bridged model, and the isobutylaldehyde path for Co-N3-C and 2N-bridged models.

Advanced Architectures of Air Electrodes in Zinc-Air Batteries and Hydrogen Fuel Cells

The air electrode is an essential component of air-demanding energy storage/conversion devices, such as zinc-air batteries (ZABs) and hydrogen fuel cells (HFCs), which determines the output power and stability of the devices. Despite atom-level modulation in catalyst design being recently achieved, the air electrodes have received much less attention, causing a stagnation in the development of air-demanding equipment. Herein, the evolution of air electrodes for ZABs and HFCs from the early stages to current requirements is reviewed. In addition, the operation mechanism and the corresponding electrocatalytic mechanisms of ZABs are summarized. In particular, by clarifying the air electrode interfaces of ZABs at different scales, several approaches to improve the air electrode in rechargeable ZABs are reviewed, including innovative electrode structures and bifunctional oxygen catalysts. Afterward, the operating mechanisms of proton-exchange-membrane fuel cells (PEMFCs) and anion-exchange-membrane fuel cells (AEMFCs) are explained. Subsequently, the strategies employed to enhance the efficiency of the membrane electrode assembly (MEA) in PEMFCs and AEMFCs, respectively, are highlighted and discussed in detail. Last, the prospects for air electrodes in ZABs and HFCs are considered by discussing the main challenges. The aim of this review is to facilitate the industrialization of ZABs and HFCs.

Defect-Engineered ZIF-Derived Non-Pt Cathode Catalyst at 1.5 mg cm-2 Loading for Proton Exchange Membrane Fuel Cells

Due to the sluggish kinetics of the oxygen reduction reaction (ORR) by non-Pt based catalyst, high loading of catalyst is required to achieve satisfactory fuel cell performance, which inevitably leads to the increase of the catalyst layer thickness with serious mass transport resistance. Herein, a defective zeolitic imidazolate framework (ZIF) derived Co/Fe-N-C catalyst with small mesopores (2-4 nm) and high density of CoFe atomic active sites are prepared by regulating the Fe dosage and pyrolysis temperature. Molecular dynamics simulation and electrochemical tests indicate that > 2 nm mesopores show insignificant influence on the diffusion process of O2 and H2 O molecules, leading to the high utilization of active sites and low mass transport resistance. The proton exchange membrane fuel cell (PEMFC) shows a high-power density of 755 mW cm-2 with only 1.5 mg cm-2 of non-Pt catalyst in the cathode. No apparent performance loss caused by concentration difference can be observed, in particular in the high current density region (1 A cm-2 ). This work emphasizes the importance of small mesopore design in the Co/Fe-N-C catalyst, which is anticipated to provide essential guidance for the application of non-Pt catalysts.

Constructing Fe-N4 Sites through Anion Exchange-mediated Transformation of Fe Coordination Environments in Hierarchical Carbon Support for Efficient Oxygen Reduction

Metal single atoms (SAs) anchored in carbon support via coordinating with N atoms are efficient active sites to oxygen reduction reaction (ORR). However, rational design of single atom catalysts with highly exposed active sites is challenging and urgently desirable. Herein, an anion exchange strategy is presented to fabricate Fe-N4 moieties anchored in hierarchical carbon nanoplates composed of hollow carbon spheres (Fe-SA/N-HCS). With the coordinating O atoms are substituted by N atoms, Fe SAs with Fe-O4 configuration are transformed into the ones with Fe-N4 configuration during the thermal activation process. Insights into the evolution of central atoms demonstrate that the SAs with specific coordination environment can be obtained by modulating in situ anion exchange process. The strategy produces a large quantity of electrochemical accessible site and high utilization rate of Fe-N4 . Fe-SA/N-HCS shows excellent ORR electrocatalytic performance with half-wave potential of 0.91 V (vs. RHE) in 0.1 M KOH, and outstanding performance when used in rechargeable aqueous and flexible Zn-air batteries. The evolution pathway for SAs demonstrated in this work offers a novel strategy to design SACs with various coordination environment and enhanced electrocatalytic activity.

Monomicelle-Directed Engineering of Strained Carbon Nanoribbons as Oxygen Reduction Catalyst

To date, precisely tailoring local active sites of well-defined earth-abundant metal-free carbon-based electrocatalysts for attractive electrocatalytic oxygen reduction reaction (ORR), remains challenging. Herein, the authors successfully introduce a strain effect on active C-C bonds adjacent to edged graphitic nitrogen (N), which raises appropriate spin-polarization and charge density of carbon active sites and kinetically favor the facilitation of O2 adsorption and the activation of O-containing intermediates. Thus, the constructed metal-free carbon nanoribbons (CNRs-C) with high-curved edges exhibit outstanding ORR activity with half-wave potentials of 0.78 and 0.9 V in 0.5 m H2 SO4 and 0.1 m KOH, respectively, overwhelming the planar one (0.52 and 0.81 V) and the N-doped carbon sheet (0.41 and 0.71 V). Especially in acidic media, the kinetic current density (Jk ) is 18 times higher than that of the planar one and the N-doped carbon sheet. Notably, these findings show the spin polarization of the asymmetric structure by introducing a strain effect on the C-C bonds for boosting ORR.

Continuous On-Site H2O2 Electrosynthesis via Two-Electron Oxygen Reduction Enabled by an Oxygen-Doped Single-Cobalt Atom Catalyst with Nitrogen Coordination

Single-Co atom catalysts are suggested as an efficient platinum metal group-free catalyst for promoting the oxygen reduction into water or hydrogen peroxide, while the relevance of the catalyst structure and selectivity is still ambiguous. Here, we propose a thermal evaporation method for modulating the chemical environment of single-Co atom catalysts and unveil the effect on the selectivity and activity. It discloses that nitrogen functional groups prefer to proceed the oxygen reduction via a 4e- pathway and notably improve the intrinsic activity, especially when being coordinated with the Co center, while oxygen doping tempts the electron delocalization around cobalt sites and decreases the binding force toward HOO* intermediates, thereby increasing the 2e- selectivity. Consequently, the well-designed oxygen-doped single-Co atom catalysts with nitrogen coordination deliver an impressive 2e- oxygen reduction performance, approaching the onset potential of 0.78 V vs RHE and selectivity of >90%. As an impressive cathode catalyst of an electrochemical flow cell, it generates H2O2 at a rate of 880 mmol gcat-1 h-1 and faradaic efficiency of 95.2%, in combination with an efficient nickel-iron oxygen evolution anode.

SiC@FeZnZiF as a Bifunctional Catalyst with Catalytic Activating PMS and Photoreducing Carbon Dioxide

Herein, we encapsulated modified silicon carbide nanoparticles utilizing a metal-organic backbone. E-SiC-FeZnZIF composites were successfully prepared via Fe doping. The catalysis activity of this bifunctional composite material was evaluated by the degradation of tetracycline (THC) and carbamazepine (CBZ) and the reduction of carbon dioxide (CO₂). Nano SiC has received widespread attention in advanced oxidation applications, especially in the catalytic activation of peroxymonosulfate (PMS). However, the inferior activity of SiC has severely restricted its practical use. In this study of dual functional composite materials, nano SiC was firstly etched under aqueous alkali. Then, zeolite imidazolate frame-8 (ZIF-8) was used for immobilization. The filling of the etched nano SiC with FeZnZiF was confirmed by SEM, XRD, FTIR, BET, and XPS analyses. In addition, E-SiC-FeZnZIF exhibited excellent catalytic activation of peroxymonosulfate (PMS) to oxidize water pollutants, which can degrade tetracycline hydrochloride (THC), achieving a removal rate of 72% within 60 min. Moreover, E-SiC-FeZnZIF exhibited a relatively high CO₂ reduction rate with H₂O. The yields of CO and CH₄ were 0.085 and 0.509 μmol g^-1, respectively, after 2 h, which are higher than that of 50 nm of commercial SiC (CO: 0.084 μmol g^-1; CH₄: 0.209 μmol g^-1). This work provides a relatively convenient synthesis path for constructing metal skeleton composites for advanced oxidation and photocatalytic applications. This will have practical significance in protecting water bodies and reducing CO₂, which are vital not only for maintaining the natural ecological balance and negative feedback regulation, but also for creating a new application carrier based on nano silicon carbide.

Heterogeneous M-N-C Catalysts for Aerobic Oxidation Reactions: Lessons from Oxygen Reduction Electrocatalysts

Nonprecious metal heterogeneous catalysts composed of first-row transition metals incorporated into nitrogen-doped carbon matrices (M-N-Cs) have been studied for decades as leading alternatives to Pt for the electrocatalytic O2 reduction reaction (ORR). More recently, similar M-N-C catalysts have been shown to catalyze the aerobic oxidation of organic molecules. This Focus Review highlights mechanistic similarities and distinctions between these two reaction classes and then surveys the aerobic oxidation reactions catalyzed by M-N-Cs. As the active-site structures and kinetic properties of M-N-C aerobic oxidation catalysts have not been extensively studied, the array of tools and methods used to characterize ORR catalysts are presented with the goal of supporting further advances in the field of aerobic oxidation.

MOF-derived transition metal-based catalysts for the electrochemical reduction of CO2 to CO: a mini review

The excessive emission of CO₂ derived from the consumption of fossil fuels has caused severe energy and environmental crises. The electrochemical reduction of CO₂ into value-added products such as CO not only reduces the CO₂ concentration in the atmosphere but also promotes sustainable development in chemical engineering. Thus, tremendous work has been devoted to developing highly efficient catalysts for the selective CO₂ reduction reaction (CO₂RR). Recently, MOF-derived transition metal-based catalysts have shown great potential for the CO₂RR due to their various compositions, adjustable structures, competitive ability, and acceptable cost. Herein, based on our work, a mini-review is proposed for an MOF-derived transition metal-based catalyst for the electrochemical reduction of CO₂ to CO. The catalytic mechanism of the CO₂RR was first introduced, and then we summarized and analyzed the MOF-derived transition metal-based catalysts in terms of MOF-derived single atomic metal-based catalysts and MOF-derived metal nanoparticle-based catalysts. Finally, we present the challenges and perspectives for the subject topic. Hopefully, this review could be helpful and instructive for the design and application of MOF-derived transition metal-based catalysts for the selective CO₂RR to CO.

High-performance atomic Co/N co-doped porous carbon catalysts derived from Co-doped metal-organic frameworks for oxygen reduction

Improving the activity and durability of carbon-based catalysts is a key challenge for their application in fuel cells. Herein, we report a highly active and durable Co/N co-doped carbon (CoNC) catalyst prepared via pyrolysis of Co-doped zeolitic-imidazolate framework-8 (ZIF-8), which was synthesized by controlling the feeding sequence to enable Co to replace Zn in the metal-organic framework (MOF). The catalyst exhibited excellent oxygen reduction reaction (ORR) performance, while the half-wave potential decreased by only 8 mV after 5,000 accelerated stress test (AST) cycles in an acidic solution. Furthermore, the catalyst exhibited satisfactory cathodic catalytic performance when utilized in a hydrogen/oxygen single proton exchange membrane (PEM) fuel cell and a Zn-air battery, yielding maximum power densities of 530 and 164 mW cm^-2, respectively. X-ray absorption spectroscopy (XAS) and high-angle annular dark field-scanning transmission electron microscopy (HAAD-STEM) analyses revealed that Co was present in the catalyst as single atoms coordinated with N to form Co-N moieties, which results in the high catalytic performance. These results show that the reported catalyst is a promising material for inclusion into future fuel cell designs.

A "Pre-Division Metal Clusters" Strategy to Mediate Efficient Dual-Active Sites ORR Catalyst for Ultralong Rechargeable Zn-Air Battery

To conquer the bottleneck of sluggish kinetics in cathodic oxygen reduction reaction (ORR) of metal-air batteries, catalysts with dual-active centers have stood out. Here, a "pre-division metal clusters" strategy is firstly conceived to fabricate a N,S-dual doped honeycomb-like carbon matrix inlaid with CoN₄ sites and wrapped Co₂ P nanoclusters as dual-active centers (Co₂ P/CoN₄ @NSC-500). A crystalline {Co^II ₂ } coordination cluster divided by periphery second organic layers is well-designed to realize delocalized dispersion before calcination. The optimal Co₂ P/CoN₄ @NSC-500 executes excellent 4e^- ORR activity surpassing the benchmark Pt/C. Theoretical calculation results reveal that the CoN₄ sites and Co₂ P nanoclusters can synergistically quicken the formation of *OOH on Co sites. The rechargeable Zn-air battery (ZAB) assembled by Co₂ P/CoN₄ @NSC-500 delivers ultralong cycling stability over 1742 hours (3484 cycles) under 5 mA cm^-2 and can light up a 2.4 V LED bulb for ≈264 hours, evidencing the promising practical application potentials in portable devices.

Achievements, Challenges, and Perspectives on Nitrogen Electrochemistry for Carbon-Neutral Energy Technologies

Unrestrained anthropogenic activities have severely disrupted the global natural nitrogen cycle, causing numerous energy and environmental issues. Electrocatalytic nitrogen transformation is a feasible and promising strategy for achieving a sustainable nitrogen economy. Synergistically combining multiple nitrogen reactions can realize efficient renewable energy storage and conversion, restore the global nitrogen balance, and remediate environmental crises. Here, we provide a unique aspect to discuss the intriguing nitrogen electrochemistry by linking three essential nitrogen-containing compounds (i.e., N₂ , NH₃ , and NO₃ ^- ) and integrating four essential electrochemical reactions, i.e., the nitrogen reduction reaction (N₂ RR), nitrogen oxidation reaction (N₂ OR), nitrate reduction reaction (NO₃ RR), and ammonia oxidation reaction (NH₃ OR). This minireview also summarizes the acquired knowledge of rational catalyst design and underlying reaction mechanisms for these interlinked nitrogen reactions. We further underscore the associated clean energy technologies and a sustainable nitrogen-based economy.

Fabrication of Hierarchical, Porous, Bimetallic, Zeolitic Imidazolate Frameworks with the Incorporation of Square Planar Pd and Its Catalytic Application

Bimetallic zeolitic imidazolate frameworks (ZIFs) containing two different metal ions can exhibit superior performances when applied in heterogeneous catalysis. Herein, we present a facile one-pot synthesis method for PdCo-ZIFs with various Pd/Co ratios, where Pd(II) ions are successfully incorporated into the Co node sites of the ZIF structure. The local structure of the bimetallic ZIFs was comprehensively investigated by pore-structure, X-ray absorption fine structure, and in situ CO adsorption Fourier transform infrared analyses. The results demonstrated that the framework comprises different coordination geometries of Co (tetrahedral) and Pd (square planar) ions connected by the benzimidazolate ligand. Notably, the inherently nonporous, 2D Co-ZIF structure was transformed into a hierarchical porous structure, and the PdCo-ZIFs exhibited a significantly increased concentration of defects and distorted Co sites. Based on these results, the catalytic performances of the synthesized ZIFs in the cycloaddition of CO2 to epoxides were evaluated under a cocatalyst and solvent-free conditions. The PdCo-ZIFs exhibited significantly higher catalytic activity (maximum turnover frequency, TOF = 2501 h-1) than Co-ZIF (TOF = 65 h-1) and Pd-ZIF (no activity), which revealed that the undercoordinated Co sites with distorted structure are the active sites rather than the incorporated Pd ions. This study provides a facile one-pot method for synthesizing bimetallic ZIFs with mixed-coordination modes, hierarchical porous structures, and modified defect concentrations, which would expand the library of structurally diverse bimetallic ZIFs toward various applications.

Atomic-Scale Structure Dynamics of Nanocrystals Revealed By In Situ and Environmental Transmission Electron Microscopy

Nanocrystals are of great importance in material sciences and industry. Engineering nanocrystals with desired structures and properties is no doubt one of the most important challenges in the field, which requires deep insight into atomic-scale dynamics of nanocrystals during the process. The rapid developments of in situ transmission electron microscopy (TEM), especially environmental TEM, reveal insights into nanocrystals to digest. According to the considerable progress based on in situ electron microscopy, a comprehensive review on nanocrystal dynamics from three aspects: nucleation and growth, structure evolution, and dynamics in reaction conditions are given. In the nucleation and growth part, existing nucleation theories and growth pathways are organized based on liquid and gas-solid phases. In the structure evolution part, the focus is on in-depth mechanistic understanding of the evolution, including defects, phase, and disorder/order transitions. In the part of dynamics in reaction conditions, solid-solid and gas-solid interfaces of nanocrystals in atmosphere are discussed and the structure-property relationship is correlated. Even though impressive progress is made, additional efforts are required to develop the integrated and operando TEM methodologies for unveiling nanocrystal dynamics with high spatial, energy, and temporal resolutions.

Identification of the Highly Active Co-N4 Coordination Motif for Selective Oxygen Reduction to Hydrogen Peroxide

Electrosynthesis of hydrogen peroxide (H2O2) through oxygen reduction reaction (ORR) is an environment-friendly and sustainable route for obtaining a fundamental product in the chemical industry. Co-N4 single-atom catalysts (SAC) have sparkled attention for being highly active in both 2e- ORR, leading to H2O2 and 4e- ORR, in which H2O is the main product. However, there is still a lack of fundamental insights into the structure-function relationship between CoN4 and the ORR mechanism over this family of catalysts. Here, by combining theoretical simulation and experiments, we unveil that pyrrole-type CoN4 (Co-N SACDp) is mainly responsible for the 2e- ORR, while pyridine-type CoN4 catalyzes the 4e- ORR. Indeed, Co-N SACDp exhibits a remarkable H2O2 selectivity of 94% and a superb H2O2 yield of 2032 mg for 90 h in a flow cell, outperforming most reported catalysts in acid media. Theoretical analysis and experimental investigations confirm that Co-N SACDp─with weakening O2/HOO* interaction─boosts the H2O2 production.

General Carbon-Supporting Strategy to Boost the Oxygen Reduction Activity of Zeolitic-Imidazolate-Framework-Derived Fe/N/Carbon Catalysts in Proton Exchange Membrane Fuel Cells

The oxygen reduction reaction (ORR) activity of the Fe/N/Carbon catalysts derived from the pyrolysis of zeolitic-imidazolate-framework-8 (ZIF-8) has been still lower than that of commercial Pt-based catalysts utilized in the proton exchange membrane fuel cells (PEMFCs) due to low density of accessible active sites. In this study, an efficient carbon-supporting strategy is developed to enhance the ORR efficiency of the ZIF-derived Fe/N/Carbon catalysts by increasing the accessible active site density. The enhancement lies in (i) improving the accessibility of active sites via converting dodecahedral particles to graphene-like layered materials and (ii) enhancing the density of FeN_x active sites via suppressing the formation of nanoparticles as well as providing extra spaces to host active sites. The optimized and efficient Fe/N/Carbon catalyst shows a half-wave potential (E_1/2) of 0.834 V versus reversible hydrogen electrode in acidic media and produces a peak power density of 0.66 W cm^-2 in an air-fed PEMFC at 2 bar backpressure, outperforming most previously reported Pt-free ORR catalysts. Finally, the general applicability of the carbon-supporting strategy is confirmed using five different commercial carbon blacks. This work provides an effective route to derive Fe/N/Carbon catalysts exhibiting a higher power density in PEMFCs.

Atomically Dispersed Dual-Metal Site Catalysts for Enhanced CO2 Reduction: Mechanistic Insight into Active Site Structures

Carbon-supported nitrogen-coordinated single-metal site catalysts (i.e., M-N-C, M: Fe, Co, or Ni) are active for the electrochemical CO₂ reduction reaction (CO₂ RR) to CO. Further improving their intrinsic activity and selectivity by tuning their N-M bond structures and coordination is limited. Herein, we expand the coordination environments of M-N-C catalysts by designing dual-metal active sites. The Ni-Fe catalyst exhibited the most efficient CO2RR activity and promising stability compared to other combinations. Advanced structural characterization and theoretical prediction suggest that the most active N-coordinated dual-metal site configurations are 2N-bridged (Fe-Ni)N₆ , in which FeN₄ and NiN₄ moieties are shared with two N atoms. Two metals (i.e., Fe and Ni) in the dual-metal site likely generate a synergy to enable more optimal *COOH adsorption and *CO desorption than single-metal sites (FeN₄ or NiN₄ ) with improved intrinsic catalytic activity and selectivity.

Theory-Guided Regulation of FeN4 Spin State by Neighboring Cu Atoms for Enhanced Oxygen Reduction Electrocatalysis in Flexible Metal-Air Batteries

Iron, nitrogen-codoped carbon (Fe-N-C) nanocomposites have emerged as viable electrocatalysts for the oxygen reduction reaction (ORR) due to the formation of FeN_x C_y coordination moieties. In this study, results from first-principles calculations show a nearly linear correlation of the energy barriers of key reaction steps with the Fe magnetic moment. Experimentally, when single Cu sites are incorporated into Fe-N-C aerogels (denoted as NCAG/Fe-Cu), the Fe centers exhibit a reduced magnetic moment and markedly enhanced ORR activity within a wide pH range of 0-14. With the NCAG/Fe-Cu nanocomposites used as the cathode catalyst in a neutral/quasi-solid aluminum-air and alkaline/quasi-solid zinc-air battery, both achieve a remarkable performance with an ultrahigh open-circuit voltage of 2.00 and 1.51 V, large power density of 130 and 186 mW cm^-2 , and good mechanical flexibility, all markedly better than those with commercial Pt/C or Pt/C-RuO₂ catalysts at the cathode.

Direct Visualization of the Evolution of a Single-Atomic Cobalt Catalyst from Melting Nanoparticles with Carbon Dissolution

Transition metal single-atom catalysts (SACs) are of immense interest, but how exactly they are evolved upon pyrolysis of the corresponding precursors remains unclear as transition metal ions in the complex precursor undergo a series of morphological changes accompanied with changes in oxidation state as a result of the interactions with the carbon support. Herein, the authors record the complete evolution process of Co SAC during the pyrolysis a Co/Zn-containing zeolitic imidazolate framework. Aberration-corrected environmental TEM coupled with in-situ EELS is used for direct visualization of the evolution process at 200-1000 °C. Dissolution of carbon into the nanoparticles of Co is found to be key to modulating the wetting behavior of nanoparticles on the carbon support; melting of Co nanoparticles and their motion within the zeolitic architecture leads to the etching of the framework structure, yielding porous C/N support onto which Co-single atoms reside. This uniquely structured Co SAC is found to be effective for the oxidation of a series of aromatic alkanes to produce selective ketones among other possible products. The carbon dissolution and melting/sublimation-driven structural dynamics of transition metal revealed here will expand the methodology in synthesizing SACs and other high-temperature processes.

Tuning Two-Electron Oxygen-Reduction Pathways for H2 O2 Electrosynthesis via Engineering Atomically Dispersed Single Metal Site Catalysts

The hydrogen peroxide (H₂ O₂ ) generation via the electrochemical oxygen reduction reaction (ORR) under ambient conditions is emerging as an alternative and green strategy to the traditional energy-intensive anthraquinone process and unsafe direct synthesis using H₂ and O₂ . It enables on-site and decentralized H₂ O₂ production using air and renewable electricity for various applications. Currently, atomically dispersed single metal site catalysts have emerged as the most promising platinum group metal (PGM)-free electrocatalysts for the ORR. Further tuning their central metal sites, coordination environments, and local structures can be highly active and selective for H₂ O₂ production via the 2e^- ORR. Herein, recent methodologies and achievements on developing single metal site catalysts for selective O₂ to H₂ O₂ reduction are summarized. Combined with theoretical computation and advanced characterization, a structure-property correlation to guide rational catalyst design with a favorable 2e^- ORR process is aimed to provide. Due to the oxidative nature of H₂ O₂ and the derived free radicals, catalyst stability and effective solutions to improve catalyst tolerance to H₂ O₂ are emphasized. Transferring intrinsic catalyst properties to electrode performance for viable applications always remains a grand challenge. The key performance metrics and knowledge during the electrolyzer development are, therefore, highlighted.

Molecule Confined Isolated Metal Sites Enable the Electrocatalytic Synthesis of Hydrogen Peroxide

The direct synthesis of hydrogen peroxide (H₂ O₂ ) through the two-electron oxygen reduction reaction is a promising alternative to the industrial anthraquinone oxidation process. Selectivity to H₂ O₂ is however limited by the four-electron pathway during oxygen reduction. Herein, it is reported that aminoanthraquinone confined isolated metal sites on carbon supports selectively steer oxygen reduction to H₂ O₂ through the two-electron pathway. Confining isolated NiN_x sites under aminoanthraquinone increases the selectivity to H₂ O₂ from below 55% to above 80% over a wide potential range. Spectroscopy characterization and density functional theory calculations indicate that isolated NiN_x sites are confined within a nanochannel formed between the molecule and the carbon support. The confinement reduces the thermodynamic barrier for OOH* desorption versus further dissociation, thus increasing the selectivity to H₂ O₂ . It is revealed how tailoring noncovalent interactions beyond the binding site can empower electrocatalysts for the direct synthesis of H₂ O₂ through oxygen reduction.

Research Progress in ZIF-8 Derived Single Atomic Catalysts for Oxygen Reduction Reaction

Transition metal (TM) single atomic catalysts (MSAC-N-C) derived from doped zeolite imidazolate frameworks (ZIF-8) are considered attractive oxygen reduction reaction (ORR) catalysts for fuel cells and metal-air batteries due to their advantages of high specific surface area, more active catalytic sites, adjustable pore size, and coordination topology features. This review provides an updated overview of the latest advances of MSAC-N-C catalysts derived from ZIF-8 precursors in ORR electrocatalysis. Particularly, some key challenges, including coordination environments regulation of catalysis center in MSAC-N-C, the active sites loading optimization and synergistic effects between TM nanoclusters/nanoparticles and the single atoms on MSAC-N-C catalysis activity, as well as their adaptability in various devices, are summarized for improving future development and application of MSAC-N-C catalysts. In addition, this review puts forward future research directions, making it play a better role in ORR catalysis for fuel cells and metal air batteries.

Identification of Catalytic Active Sites for Durable Proton Exchange Membrane Fuel Cell: Catalytic Degradation and Poisoning Perspectives

Recent progress in synthetic strategies, analysis techniques, and computational modeling assist researchers to develop more active catalysts including metallic clusters to single-atom active sites (SACs). Metal coordinated N-doped carbons (M-N-C) are the most auspicious, with a large number of atomic sites, markedly performing for a series of electrochemical reactions. This perspective sums up the latest innovative and computational comprehension, while giving credit to earlier/pioneering work in carbonaceous assembly materials towards robust electrocatalytic activity for proton exchange membrane fuel cells via inclusive performance assessment of the oxygen reduction reaction (ORR). M-N_x -C_y are exclusively defined active sites for ORR, so there is a unique possibility to intellectually design the relatively new catalysts with much improved activity, selectivity, and durability. Moreover, some SACs structures provide better performance in fuel cells testing with long-term durability. The efforts to understand the connection in SACs based M-N_x -C_y moieties and how these relate to catalytic ORR performance are also conveyed. Owing to comprehensive practical application in the field, this study has covered very encouraging aspects to the current durability status of M-N-C based catalysts for fuel cells followed by degradation mechanisms such as macro-, microdegradation, catalytic poisoning, and future challenges.

Two-Dimensional Dirac Nodal Line Carbon Nitride to Anchor Single-Atom Catalyst for Oxygen Reduction Reaction

Two-dimensional carbon nitride (2DCN) materials have emerged as an important class of 2D materials beyond graphene. However, 2DCN materials with nodal-line semimetal characteristic are rarely reported. In this work, a new nodal-line semimetal 2DCN with the stoichiometry C₄ N₄ is designed by using density functional theory (DFT) calculations and its application to anchor single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) is investigated. C₄ N₄ is a planar covalent network (sp² hybridization) with regular holes formed by the four N atoms, which is dynamically, thermodynamically, and mechanically stable. The nodal line is contributed by the p_z orbitals of C and p_x/y orbitals of N atoms. C₄ N₄ shows an anisotropic Fermi velocity and high electron mobility. Because of its porous structure, C₄ N₄ can anchor heteroatoms as SACs for electrocatalysis. C₄ N₄ anchored with Fe or Co is shown to be highly active for the ORR with a rather high half-wave potential of around 0.90 V, which is higher than those of SACs on other carbon nitrides. These findings may provide a new strategy to design novel substrates for SACs.

Boosting Electrocatalytic Activity of Single Atom Catalysts Supported on Nitrogen-Doped Carbon through N Coordination Environment Engineering

Nonprecious group metal (NPGM)-based single atom catalysts (SACs) hold a great potential in electrocatalysis and dopant engineering has been extensively exploited to boost their catalytic activity, while the coordination environment of dopant, which also significantly affects the electronic structure of SACs, and consequently their electrocatalytic performance, have been largely ignored. Here, by adopting a precursor modulation strategy, the authors successfully synthesize single cobalt atom catalysts embedded in nitrogen-doped carbon, Co-N/C, with similar overall Co and N concentrations but different N types, that is, pyridinic N (N_P ), graphitic N (N_G ), and pyrrolic N (N_PY ). Co-N/C with the Co-N₄ moieties coordinated with N_G displays far superior activity for oxygen reduction (ORR) and evolution reactions, and superior activity and stability in both zinc-air batteries and proton exchange membrane fuel cells. Density functional theory calculation indicates that coordinated N species in particular N_G functions as electron donors to the Co core of Co-N₄ active sites, leading to the downshift of d-band center of Co-N₄ and weakening the binding energies of the intermediates on Co-N₄ sites, thus, significantly promoting catalytic kinetics and thermodynamics for ORR in a full pH range condition.

A Substrate-Induced Fabrication of Active Free-Standing Nanocarbon Film as Air Cathode in Rechargeable Zinc-Air Batteries

Designing cost-effective and high-efficiency bifunctional electrocatalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) occurred at air electrodes is vitally significant yet challenging for Zn-air batteries (ZABs). In this work, a zinc substrate induced fabrication is reported of free-standing nanocarbon hybrid film which shows good bifunctional activity and can be directly used as the air electrode in the rechargeable ZABs. The designed nanocarbon film in Zn-air battery provides a satisfactory power density of 185 mW cm^-2 and cycling stability for 1200 h under the current density of 10 mA cm^-2 . This hybrid film also gives a solid-state ZAB excellent flexibility with a power density of 160 mW cm^-2 . The free-standing hybrid with abundant cobalt-nitrogen-carbon species coupled with porous architecture would be the original factor for its satisfactory performance of rechargeable ZABs. This work would pave an ideal way to design integrated electrode with high electrocatalytic performance towards electrochemical energy technologies.

Active site engineering of single-atom carbonaceous electrocatalysts for the oxygen reduction reaction

The electrocatalytic oxygen reduction reaction (ORR) is the vital process at the cathode of next-generation electrochemical storage and conversion technologies, such as metal-air batteries and fuel cells. Single-metal-atom and nitrogen co-doped carbonaceous electrocatalysts (M-N-C) have emerged as attractive alternatives to noble-metal platinum for catalyzing the kinetically sluggish ORR due to their high electrical conductivity, large surface area, and structural tunability at the atomic level, however, their application is limited by the low intrinsic activity of the metal-nitrogen coordination sites (M-N x ) and inferior site density. In this Perspective, we summarize the recent progress and milestones relating to the active site engineering of single atom carbonous electrocatalysts for enhancing the ORR activity. Particular emphasis is placed on the emerging strategies for regulating the electronic structure of the single metal site and populating the site density. In addition, challenges and perspectives are provided regarding the future development of single atom carbonous electrocatalysts for the ORR and their utilization in practical use.

Atomic Structure Evolution of Pt-Co Binary Catalysts: Single Metal Sites versus Intermetallic Nanocrystals

Due to their exceptional catalytic properties for the oxygen reduction reaction (ORR) and other crucial electrochemical reactions, PtCo intermetallic nanoparticle (NP) and single atomic (SA) Pt metal site catalysts have received considerable attention. However, their formation mechanisms at the atomic level during high-temperature annealing processes remain elusive. Here, the thermally driven structure evolution of Pt-Co binary catalyst systems is investigated using advanced in situ electron microscopy, including PtCo intermetallic alloys and single Pt/Co metal sites. The pre-doping of CoN₄ sites in carbon supports and the initial Pt NP sizes play essential roles in forming either Pt₃ Co intermetallics or single Pt/Co metal sites. Importantly, the initial Pt NP loadings against the carbon support are critical to whether alloying to L1₂ -ordered Pt₃ Co NPs or atomizing to SA Pt sites at high temperatures. High Pt NP loadings (e.g., 20%) tend to lead to the formation of highly ordered Pt₃ Co intermetallic NPs with excellent activity and enhanced stability toward the ORR. In contrast, at a relatively low Pt loading (<6 wt%), the formation of single Pt sites in the form of PtC₃ N is thermodynamically favorable, in which a synergy between the PtC₃ N and the CoN₄ sites could enhance the catalytic activity for the ORR, but showing insufficient stability.