Visible-Light-Induced Homolysis of Earth-Abundant Metal-Substrate Complexes: A Complementary Activation Strategy in Photoredox Catalysis

Earth-Abundant Recyclable Magnetic Iron Oxide Nanoparticles for Green-light Mediated C-H Arylation in Heterogeneous Phase

A magnetically isolable iron oxide nanoparticles is introduced as an efficient heterogeneous photocatalyst for non-directed C-H arylation employing aryl diazonium salts as the aryl precursors. This first-row transition metal-based photocatalyst revealed versatile activities and is applicable to a wide range of substrates, demonstrating brilliant efficacy and superior recyclability. Detailed catalytic characterization describes the physical properties and redox behavior of the Fe-catalyst. Adequate control experiments helped to establish the radical-based mechanism for the C-H arylation.

A General Iron-Catalyzed Decarboxylative Oxygenation of Aliphatic Carboxylic Acids

We report an iron-catalyzed decarboxylative C(sp3)-O bond-forming reaction under mild, base-free conditions with visible light irradiation. The transformation uses readily available and structurally diverse carboxylic acids, iron photocatalyst, and 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) derivatives as oxygenation reagents. The process exhibits a broad scope in acids possessing a wide range of stereoelectronic properties and functional groups. The developed reaction was applied to late-stage oxygenation of a series of bio-active molecules. The reaction leverages the ability of iron complexes to generate carbon-centered radicals directly from carboxylic acids by photoinduced carboxylate-to-iron charge transfer. Kinetic, electrochemical, EPR, UV/Vis, HRMS, and DFT studies revealed that TEMPO has a triple role in the reaction: as an oxygenation reagent, an oxidant to turn over the Fe-catalyst, and an internal base for the carboxylic acid deprotonation. The obtained TEMPO adducts represent versatile synthetic intermediates that were further engaged in C-C and C-heteroatom bond-forming reactions using commercial organo-photocatalysts and nucleophilic reagents.

Iron-Catalyzed Multicomponent C-H Alkylation of in Situ Generated Imines via Photoinduced Ligand-to-Metal Charge Transfer

Herein, we describe a novel photoinduced iron-catalyzed strategy for multicomponent C-H alkylation of in situ generated imines. By utilizing the alkyl radicals generated through iron-mediated photocatalytic C-H activation, the imines formed in situ are further subjected to addition reactions, resulting in the synthesis of various secondary and tertiary amine products. This method is simple to operate and does not require additional oxidants. It is applicable to inert alkane substrates such as cyclic alkanes, cyclic ethers, toluene, and ketones. The reaction is also compatible with various aromatic amines, alkyl amines, halogenated aromatic amines, as well as aromatic aldehydes, alkyl aldehydes, and cinnamaldehyde, among other different types of aldehydes.

Iron photocatalysis via Brønsted acid-unlocked ligand-to-metal charge transfer

Reforming sustainable 3d-metal-based visible light catalytic platforms for inert bulk chemical activation is highly desirable. Herein, we demonstrate the use of a Brønsted acid to unlock robust and practical iron ligand-to-metal charge transfer (LMCT) photocatalysis for the activation of multifarious inert haloalkylcarboxylates (CnXmCOO-, X = F or Cl) to produce CnXm radicals. This process enables the fluoro-polyhaloalkylation of non-activated alkenes by combining easily available Selectfluor as a fluorine source. Valuable alkyl fluorides including potential drug molecules can be easily obtained through this protocol. Mechanistic studies indicate that the real light-harvesting species may derive from the in situ-assembly of Fe3+, CnXmCOO-, H+, and acetonitrile solvent, in which the Brønsted acid indeed increases the efficiency of LMCT between the iron center and CnXmCOO- via hydrogen-bond interactions. We anticipate that this Brønsted acid-unlocked iron LMCT platform would be an intriguing sustainable option to execute the activation of inert compounds.

Visible-light induced selenocyclization of 2-ethynylanilines under ambient conditions: simple FeBr3 as a dual-functional catalyst

We report herein a visible-light induced, Fe-catalyzed selenocyclization of 2-ethynylanilines with diselenides under ambient conditions, employing ethyl acetate as a benign solvent with no stoichiometric additive required. The simple iron salt FeBr3 serves as both a photo-induced LMCT (Ligand-to-Metal Charge Transfer) catalyst and a Lewis acid catalyst to promote the desired transformation in a sustainable manner, enabling the facile synthesis of diverse 3-selenylindoles with extended substitution patterns. Moreover, gram-scale reactions and late-stage functionalization of bioactive molecules further highlight the synthetic practicality of this method.

Iron-Catalyzed, Light-Driven Decarboxylative Alkoxyamination

An iron-catalyzed visible-light driven decarboxylative alkoxyamination is disclosed. In the presence of FeBr2 and TEMPO, a large array of carboxylic acids including marketed drugs and biobased molecules is turned into the corresponding alkoxyamine derivatives. The versatility of the latter offers an entry towards molecular diversity generation from abundant starting materials and catalyst. Overall, this method proposes a unified and general approach for LMCT-based iron-catalyzed decarboxylative functionalization.

Cobalt-Mediated Photochemical C-H Arylation of Pyrroles

Precious metal complexes remain ubiquitous in photoredox catalysis (PRC) despite concerted efforts to find more earth-abundant catalysts and replacements based on 3d metals in particular. Most otherwise plausible 3d metal complexes are assumed to be unsuitable due to short-lived excited states, which has led researchers to prioritize the pursuit of longer excited-state lifetimes through careful molecular design. However, we report herein that the C-H arylation of pyrroles and related substrates (which are benchmark reactions for assessing the efficacy of photoredox catalysts) can be achieved using a simple and readily accessible octahedral bis(diiminopyridine) cobalt complex, [1-Co](PF6)2. Notably, [1-Co]2+ efficiently functionalizes both chloro- and bromoarene substrates despite the short excited-state lifetime of the key photoexcited intermediate *[1-Co]2+ (8 ps). We present herein the scope of this C-H arylation protocol and provide mechanistic insights derived from detailed spectroscopic and computational studies. These indicate that, despite its transient existence, reduction of *[1-Co]2+ is facilitated via pre-assembly with the NEt3 reductant, highlighting an alternative strategy for the future development of 3d metal-catalyzed PRC.

Photoinduced Ligand-to-Metal Charge Transfer in Base-Metal Catalysis

The absorption of light by photosensitizers has been shown to offer novel reactive pathways through electronic excited state intermediates, complementing ground state mechanisms. Such strategies have been applied in both photocatalysis and photoredox catalysis, driven by generating reactive intermediates from their long-lived excited states. One developing area is photoinduced ligand-to-metal charge transfer (LMCT) catalysis, in which coordination of a ligand to a metal center and subsequent excitation with light results in the formation of a reactive radical and a reduced metal center. This mini review concerns the foundations and recent developments in ligand-to-metal charge transfer in transition metal catalysis focusing on the organic transformations made possible through this mechanism.

Synergistic use of photocatalysis and convergent paired electrolysis for nickel-catalyzed arylation of cyclic alcohols

The merging of transition metal catalysis with electrochemistry has become a powerful tool for organic synthesis because catalysts can govern the reactivity and selectivity. However, coupling catalysts with alkyl radical species generated by anodic oxidation remains challenging because of electrode passivation, dimerization, and overoxidation. In this study, we developed convergent paired electrolysis for the coupling of nickel catalysts with alkyl radicals derived from photoinduced ligand-to-metal charge-transfer of cyclic alcohols and iron catalysts, providing a practical method for site-specific and remote arylation of ketones. The synergistic use of photocatalysis with convergent paired electrolysis can provide alternative avenues for metal-catalyzed radical coupling reactions.

Organic Photoredox-Catalyzed S-Trifluoromethylation of Aromatic and Heteroaromatic Thiols

A visible-light-mediated trifluoromethylation protocol was developed for the conversion of (hetero)aromatic thiols to their respective S-trifluoromethylated derivatives employing trifluoromethanesulfonyl chloride (CF3SO2Cl) as a cost-effective source of trifluoromethyl radical (CF3·) and a highly reducing organophotocatalyst, 3DPA2FBN. The developed methodology is operationally simple, providing access to a diverse range of products in up to 92% yield. A plausible mechanism has been postulated based on preliminary mechanistic studies, including irradiation on/off, UV-vis studies, and radical trapping experiments.

Photoelectrochemical Fe/Ni cocatalyzed C-C functionalization of alcohols

The simultaneous activation of reactants on the anode and cathode via paired electrocatalysis has not been extensively demonstrated. This report presents a paired oxidative and reductive catalysis based on earth-abundant iron/nickel cocatalyzed C-C functionalization of ubiquitous alcohols. A variety of alcohols (i.e., primary, secondary, tertiary, or unstrained cyclic alcohols) can be activated at very low oxidation potential of (~0.30 V vs. Ag/AgCl) via photoelectrocatalysis coupled with versatile electrophiles. This reactivity yields a wide range of structurally diverse molecules with broad functional group compatibility (more than 50 examples).

Unified Approach to Deamination and Deoxygenation Through Isonitrile Hydrodecyanation: A Combined Experimental and Computational Investigation

Herein, we describe a general hydrodefunctionalization protocol of alcohols and amines through a common isonitrile intermediate. To cleave the relatively inert C-NC bond, we leveraged dual hydrogen atom transfer (HAT) and photoredox catalysis to generate a nucleophilic boryl radical, which readily forms an imidoyl radical intermediate from the isonitrile. Rapid β-scission then accomplishes defunctionalization. This method has been applied to the hydrodefunctionalization of both amine and alcohol-containing pharmaceuticals, natural products, and biomolecules. We extended this approach to the reduction of carbonyls and olefins to their saturated counterparts, as well as the hydrodecyanation of alkyl nitriles. Both experimental and computational studies demonstrate a facile β-scission of the imidoyl radical, and reconcile differences in reactivity between nitriles and isonitriles within our protocol.

Iron-catalyzed decarboxylative radical addition to chiral azomethine imines upon visible light

Herein, we disclose an eco-efficient redox-neutral iron-catalyzed decarboxylative radical addition to chiral azomethine imines upon visible light (427 nm) giving cyclic hydrazine derivatives with dr ranging from 82 : 18 to >96 : 4. This earth-abundant metal promoted sequence proceeds efficiently under ligand-free conditions based on a LMCT process and opens a route to new chiral heterocycles.

Photoinduced Group Transposition via Iridium-Nitrenoid Leading to Amidative Inner-Sphere Aryl Migration

We herein report a fundamental mechanistic investigation into photochemical metal-nitrenoid generation and inner-sphere transposition reactivity using organometallic photoprecursors. By designing Cp*Ir(hydroxamate)(Ar) complexes, we induced photo-initiated ligand activation, allowing us to explore the amidative σ(Ir-aryl) migration reactivity. A combination of experimental mechanistic studies, femtosecond transient absorption spectroscopy, and density functional theory (DFT) calculations revealed that the metal-to-ligand charge transfer enables the σ(N-O) cleavage, followed by Ir-acylnitrenoid generation. The final inner-sphere σ(Ir-aryl) group migration results in a net amidative group transposition.

Mechanisms of Photoredox Catalysis Featuring Nickel-Bipyridine Complexes

Metallaphotoredox catalysis can unlock useful pathways for transforming organic reactants into desirable products, largely due to the conversion of photon energy into chemical potential to drive redox and bond transformation processes. Despite the importance of these processes for cross-coupling reactions and other transformations, their mechanistic details are only superficially understood. In this review, we have provided a detailed summary of various photoredox mechanisms that have been proposed to date for Ni-bipyridine (bpy) complexes, focusing separately on photosensitized and direct excitation reaction processes. By highlighting multiple bond transformation pathways and key findings, we depict how photoredox reaction mechanisms, which ultimately define substrate scope, are themselves defined by the ground- and excited-state geometric and electronic structures of key Ni-based intermediates. We further identify knowledge gaps to motivate future mechanistic studies and the development of synergistic research approaches spanning the physical, organic, and inorganic chemistry communities.

Vibration-mediated long-wavelength photolysis of electronegative bonds beyond S0-S1 and S0-T1 transitions

Photolysis is an attractive method in organic synthesis to produce free radicals through direct bond cleavage. However, in this method, specific irradiation wavelengths of light have been considered indispensable for excitation through S0-Sn or S0-Tn transitions. Here we report the photoinduced homolysis of electronegative interelement bonds using light at wavelengths much longer than theoretically and spectroscopically predicted for the S0-Sn or S0-Tn transitions. This long-wavelength photolysis proceeds in N-Cl, N-F, and O-Cl bonds at room temperature under blue, green, and red LED irradiation, initiating diverse radical reactions. Through experimental, spectroscopic, and computational studies, we propose that this "hidden" absorption is accessible via electronic excitations from naturally occurring vibrationally excited ground states to unbonded excited states and is due to the electron-pair repulsion between electronegative atoms.

Nickel/photoredox-catalyzed three-component silylacylation of acrylates via chlorine photoelimination

The extensive utility of organosilicon compounds across a wide range of disciplines has sparked significant interest in their efficient synthesis. Although catalytic 1,2-silyldifunctionalization of alkenes provides a promising method for the assembly of intricate organosilicon frameworks with atom and step economy, its advancement is hindered by the requirement of an external hydrogen atom transfer (HAT) agent in photoredox catalysis. Herein, we disclose an efficient three-component silylacylation of α,β-unsaturated carbonyl compounds, leveraging a synergistic nickel/photoredox catalysis with various hydrosilanes and aroyl chlorides. This method enables the direct conversion of acrylates into valuable building blocks that contain both carbonyl and silicon functionalities through a single, redox-neutral process. Key to this reaction is the precise activation of the Si-H bond, achieved through chlorine radical-induced HAT, enabled by the photoelimination of a Ni-Cl bond. Acyl chlorides serve a dual role, functioning as both acylating agents and chloride donors. Our methodology is distinguished by its mild conditions and extensive substrate adaptability, significantly enhancing the late-stage functionalization of pharmaceuticals.

Expedient radical phosphonylations via ligand to metal charge transfer on bismuth

Bismuth, in spite of its low cost and low toxicity, has found limited application in organic synthesis. Although the photoactivity of Bi(iii) salts has been well studied, this has not been effectively exploited in photocatalysis. To date, only a single report exists for the Bi-based photocatalysis, wherein carbon centered radicals were generated using ligand to metal charge transfer (LMCT) on bismuth. In this regard, expanding the horizon of bismuth LMCT catalysis for the generation of heteroatom centered radicals, we hereby report an efficient radical phosphonylation using BiCl3 as the LMCT catalyst. Phosphonyl radicals generated via visible-light induced LMCT of BiCl3 were subjected to a variety of transformations like alkylation, amination, alkynylation and cascade cyclizations. The catalytic system tolerated a wide range of substrate classes, delivering excellent yields of the scaffolds. The reactions were scalable and required low catalytic loading of bismuth. Detailed mechanistic studies were carried out to probe the reaction mechanism. Diverse radical phosphonylations leading to the formation of sp3-C-P, sp2-C-P, sp-C-P, and P-N bonds in the current work present the candidacy of bismuth as a versatile photocatalyst for small molecule activation.

A new era of LMCT: leveraging ligand-to-metal charge transfer excited states for photochemical reactions

Ligand-to-metal charge transfer (LMCT) excited states are capable of undergoing a wide array of photochemical reactions, yet receive minimal attention compared to other charge transfer excited states. This work provides general criteria for designing transition metal complexes that exhibit low energy LMCT excited states and routes to drive photochemistry from these excited states. General design principles regarding metal identity, oxidation state, geometry, and ligand sets are summarized. Fundamental photoreactions from these states including visible light-induced homolysis, excited state electron transfer, and other photoinduced chemical transformations are discussed and key design principles for enabling these photochemical reactions are further highlighted. Guided by these fundamentals, this review outlines critical considerations for the future design and application of coordination complexes with LMCT excited states.

Oxidative two-state photoreactivity of a manganese(IV) complex using near-infrared light

Highly reducing or oxidizing photocatalysts are a fundamental challenge in photochemistry. Only a few transition metal complexes with Earth-abundant metal ions have so far advanced to excited state oxidants. All these photocatalysts require high-energy light for excitation, and their oxidizing power has not been fully exploited due to energy dissipation before reaching the photoactive state. Here we demonstrate that the complex [Mn(dgpy)2]4+, based on Earth-abundant manganese and the tridentate 2,6-diguanidylpyridine ligand (dgpy), evolves to a luminescent doublet ligand-to-metal charge transfer (2LMCT) excited state (1,435 nm, 0.86 eV) with a lifetime of 1.6 ns after excitation with low-energy near-infrared light. This 2LMCT state oxidizes naphthalene to its radical cation. Substrates with extremely high oxidation potentials up to 2.4 V enable the [Mn(dgpy)2]4+ photoreduction via a high-energy quartet 4LMCT excited state with a lifetime of 0.78 ps, proceeding via static quenching by the solvent. This process minimizes free energy losses and harnesses the full photooxidizing power, and thus allows oxidation of nitriles and benzene using Earth-abundant elements and low-energy light.

Multi-stimuli-responsive polymer degradation by polyoxometalate photocatalysis and chloride ions

Photocatalytic polymer degradation based on harnessing the abundant light energy present in the environment is one of the promising approaches to address the issue of plastic waste. In this study, we developed a multi-stimuli-responsive photocatalytic polymer degradation system facilitated by the photocatalysis of a polyoxometalate [γ-PV2W10O40]5- in conjunction with chloride ions (Cl-) as harmless and abundant stimuli. The degradation of various polymers was significantly accelerated in the presence of Cl-, which was attributed to the oxidation of Cl- by the polyoxometalate photocatalysis into a highly reactive chlorine radical that can efficiently generate a carbon-centered radical for subsequent polymer degradation. Although organic and organometallic photocatalysts decomposed under the conditions for photocatalytic polymer degradation in the presence of Cl-, [γ-PV2W10O40]5- retained its structure even under these highly oxidative conditions.

Dual Acridine/Decatungstate Photocatalysis for the Decarboxylative Radical Addition of Carboxylic Acids to Azomethines

A concept for the dual use of acridine and tetrabutylammonium decatungstate photocatalysts in the reactions of carboxylic acids is proposed. Imines generated in situ from aldehydes and p-methoxyaniline, as well as other azomethines, were used as radical acceptors. The role of the decatungstate is believed to facilitate the turnover of the acridine photocatalyst by means of hydrogen atom transfer.

Visible-Light-Driven Unsymmetric gem-Difunctionalization of Vinyl Azides with Thiosulfonates or Selenosulfonates

Thiosulfonylation and selenosulfonylation of vinyl azides with thiosulfonates and selenosulfonates were achieved using Cu(dap)2Cl as a photosensitizer under visible-light irradiation. This reaction is the application of a vinyl azide substrate in a group transfer radical addition (GTRA) reaction, through β-difunctionalization, to obtain a variety of unsymmetric difunctionalized N-unprotected enamines.

Selective α-oxidation of amides via visible-light-driven iron catalysis

Hydroxyl radicals (˙OH) as one of the highly reactive species can react unselectively with a wide range of chemicals. The ˙OH radicals are typically generated under harsh conditions. Herein, we report hydroxyl radical-induced selective N-α C(sp3)-H bond oxidation of amides under greener and mild conditions via an Fe(NO3)3·9H2O catalyst inner sphere pathway upon irradiation with a 30 W blue LED light strip (λ = 455 nm) using NaBrO3 as the oxidant. This protocol exhibited high chemoselectivity and excellent functional group tolerance. A preliminary mechanism investigation demonstrated that the iron catalyst afforded hydroxyl radicals via the visible-light-induced homolysis (VLIH) of iron complexes followed by a hydrogen atom transfer (HAT) process to realize this transformation.

Werner Salt as Nickel and Ammonia Source for Photochemical Synthesis of Primary Aryl Amines

Cheap, stable and easy-to-handle Werner ammine salts have been known for more than a century; but they have been rarely used in organic synthesis. Herein, we report that the Werner hexammine complex [Ni(NH3 )6 ]Cl2 can be used as both a nitrogen and a catalytic nickel source that allow for the efficient amination of aryl chlorides in the presence of a catalytic amount of bipyridine ligand under the irradiation of 390-395 nm light without the need of any additional catalysts. More than 80 aryl chlorides, including more than 20 drug molecules, were aminated, demonstrating the practicality and generality of this method in synthetic chemistry. A slow NH3 release mechanism is in operation, obviating the problem of catalyst poisoning. Still interestingly, we show that the Werner salt can be easily recovered and reused, solving the problem of difficult recovery of transition metal nickel catalysts. The protocol thus provides an efficient new strategy for the synthesis of primary aryl amines.

Decarboxylative photoinduced ligand-to-metal charge transfer reaction: synthesis of 2-substituted chroman-4-ones

In this manuscript, a photoinduced ligand-to-metal charge transfer (LMCT) approach, employing transition-metal-based photocatalysts, for the efficient alkylation of electron-poor olefin is described. The developed redox-neutral process benefits from mild reaction conditions and involves a wide range of chromone-3-carboxylic acids as well as nucleophiles amenable to selective C-H functionalization leading to the formation of 2-substituted chroman-4-one compounds with potential biological activity.

Photocatalyzed Enantioselective Functionalization of C(sp3)-H Bonds

Owing to its diverse activation processes including single-electron transfer (SET) and hydrogen-atom transfer (HAT), visible-light photocatalysis has emerged as a sustainable and efficient platform for organic synthesis. These processes provide a powerful avenue for the direct functionalization of C(sp3)-H bonds under mild conditions. Over the past decade, there have been remarkable advances in the enantioselective functionalization of the C(sp3)-H bond via photocatalysis combined with conventional asymmetric catalysis. Herein, we summarize the advances in asymmetric C(sp3)-H functionalization involving visible-light photocatalysis and discuss two main pathways in this emerging field: (a) SET-driven carbocation intermediates are followed by stereospecific nucleophile attacks; and (b) photodriven alkyl radical intermediates are further enantioselectively captured by (i) chiral π-SOMOphile reagents, (ii) stereoselective transition-metal complexes, and (iii) another distinct stereoscopic radical species. We aim to summarize key advances in reaction design, catalyst development, and mechanistic understanding, to provide new insights into this rapidly evolving area of research.

Visible light-induced hydrogen atom transfer trifluoromethylthiolation of aldehydes with bismuth catalyst

By using a combination of BiCl3 and TBACl as a ligand-to-metal charge transfer (LMCT) photocatalyst, hydrogen atom transfer trifluoromethylthiolation of aldehydes was achieved under visible light irradiation. The present method provides economical and operationally simple access to trifluoromethylthioesters using low toxicity and cost-effective bismuth catalysts under mild reaction conditions. Based on the radical trapping experiments, the direct conversion of aldehydes to acyl radicals via chlorine radicals as HAT reagents was proposed as the reaction mechanism.

Photoinduced cerium-catalyzed C-H acylation of unactivated alkanes

Ketones are ubiquitous motifs in the realm of pharmaceuticals and natural products. Traditional approaches to accessing these species involve the addition of metal reagents to carboxyl compounds under harsh conditions. Herein, we report a cerium-catalyzed acylation of unactivated C(sp3)-H bonds using bench-stable acyl azolium reagents under mild and operationally-friendly conditions. This reaction exhibits excellent generality, accommodating a wide range of feedstock chemicals such as cycloalkanes and acyclic compounds as well as facilitating the late-stage functionalization of pharmaceuticals. We demonstrate further applications of our strategy with a three-component radical relay reaction and an enantioselective N-heterocyclic carbene (NHC) and cerium dual-catalyzed reaction.

Cu(II) salts as terminal oxidants in visible-light photochemical oxidation reactions

Photochemistry provides an important platform for the discovery of synthetically useful transformations. The development of new oxidative photoreactions, however, has proven to be relatively challenging. The importance of the identity of the terminal oxidant has been an underappreciated consideration in the design of these reactions. Many of the most common terminal oxidants used in ground-state catalytic methods are poorly compatible with the one-electron oxidation state changes characteristic of photoredox reactions and result in hard-to-control deleterious side reactions. As an alternative, Cu(II) salts have emerged as versatile terminal oxidants in photochemical oxidation reactions that are terrestrially abundant, cost-effective, and readily compatible with one-electron oxidation state changes. This review highlights recent reaction methods that leverage Cu(II) oxidation in combination with the photochemical activation of substrates or that use Cu(II) salts as both the active chromophore and terminal oxidant.

Photocatalytic, modular difunctionalization of alkenes enabled by ligand-to-metal charge transfer and radical ligand transfer

Ligand-to-metal charge transfer (LMCT) is a mechanistic strategy that provides a powerful tool to access diverse open-shell species using earth abundant elements and has seen tremendous growth in recent years. However, among many reaction manifolds driven by LMCT reactivity, a general and catalytic protocol for modular difunctionalization of alkenes remains unknown. Leveraging the synergistic cooperation of iron-catalyzed ligand-to-metal charge transfer and radical ligand transfer (RLT), here we report a photocatalytic, modular difunctionalization of alkenes using inexpensive iron salts catalytically to function as both radical initiator and terminator. Additionally, strategic use of a fluorine atom transfer reagent allows for general fluorochlorination of alkenes, providing the first example of interhalogen compound formation using earth abundant element photocatalysis. Broad scope, mild conditions and versatility in converting orthogonal nucleophiles (TMSN3 and NaCl) directly into corresponding open-shell radical species are demonstrated in this study, providing a robust means towards accessing vicinal diazides and homo-/hetero-dihalides motifs catalytically. These functionalities are important precursors/intermediates in medicinal and material chemistry. Preliminary mechanistic studies support the radical nature of these transformations, disclosing the tandem LMCT/RLT as a powerful reaction manifold in catalytic olefin difunctionalization.

Direct Decarboxylation of Trifluoroacetates Enabled by Iron Photocatalysis

Trifluoroacetates are the most abundant and accessible sources of trifluoromethyl groups, which are key components in pharmaceuticals and agrochemicals. The generation of trifluoromethyl reactive radicals from trifluoroacetates requires their decarboxylation, which is hampered by their high oxidation potential. This constitutes a major challenge for redox-based methods, because of the need to pair the redox potentials with trifluoroacetate. Here we report a strategy based on iron photocatalysis to promote the direct photodecarboxylation of trifluoroacetates that displays reactivity features that escape from redox limitations. Our synthetic design has enabled the use of trifluoroacetates for the trifluoromethylation of more easily oxidizable organic substrates, offering new opportunities for late-stage derivatization campaigns using chemical feedstocks, Earth-abundant catalysts, and visible-light.

Selective C(sp3)-H arylation/alkylation of alkanes enabled by paired electrocatalysis

We report a combination of electrocatalysis and photoredox catalysis to perform selective C(sp3)-H arylation/alkylation of alkanes, in which a binary catalytic system based on earth-abundant iron and nickel is applied. Reaction selectivity between two-component C(sp3)-H arylation and three-component C(sp3)-H alkylation is tuned by modulating the applied current and light source. Importantly, an ultra-low anodic potential (~0.23 V vs. Ag/AgCl) is applied in this protocol, thus enabling compatibility with a variety of functional groups (>70 examples). The robustness of the method is further demonstrated on a preparative scale and applied to late-stage diversification of natural products and pharmaceutical derivatives.

Photocatalytic hydrofluoroalkylation of alkenes with carboxylic acids

Incorporation of fluoroalkyl motifs in pharmaceuticals can enhance the therapeutic profiles of the parent molecules. The hydrofluoroalkylation of alkenes has emerged as a promising route to diverse fluoroalkylated compounds; however, current methods require superstoichiometric oxidants, expensive/oxidative fluoroalkylating reagents and precious metals, and often exhibit limited scope, making a universal protocol that addresses these limitations highly desirable. Here we report the hydrofluoroalkylation of alkenes with cheap, abundant and available fluoroalkyl carboxylic acids as the sole reagents. Hydrotrifluoro-, difluoro-, monofluoro- and perfluoroalkylation are all demonstrated, with broad scope, mild conditions (redox neutral) and potential for late-stage modification of bioactive molecules. Critical to success is overcoming the exceedingly high redox potential of feedstock fluoroalkyl carboxylic acids such as trifluoroacetic acid by leveraging cooperative earth-abundant, inexpensive iron and redox-active thiol catalysis, enabling these reagents to be directly used as hydroperfluoroalkylation donors without pre-activation. Preliminary mechanistic studies support the radical nature of this cooperative process.

Visible-light-induced iron-catalyzed reduction of nitroarenes to anilines

An efficient visible-light-induced iron-catalyzed reduction of nitroarenes to anilines by using N-ethylmorpholine (NEM) as a reductant under mild conditions has been developed. The reaction proceeds with photosensitizer-free conditions and features good to excellent yields and broad functional group tolerance. Preliminary mechanistic investigations showed that this reaction was conducted via ligand-to-metal (NEM to Fe3+) charge transfer and nitro triplet biradical-induced hydrogen atom transfer processes.

Facile access to benzofuran derivatives through radical reactions with heteroatom-centered super-electron-donors

The development of suitable electron donors is critical to single-electron-transfer (SET) processes. The use of heteroatom-centered anions as super-electron-donors (SEDs) for direct SET reactions has rarely been studied. Here we show that heteroatom anions can be applied as SEDs to initiate radical reactions for facile synthesis of 3-substituted benzofurans. Phosphines, thiols and anilines bearing different substitution patterns work well in this inter-molecular radical coupling reaction and the 3-functionalized benzofuran products bearing heteroatomic functionalities are given in moderate to excellent yields. The reaction mechanism is elucidated via control experiments and computational methods. The afforded products show promising applications in both organic synthesis and pesticide development.

Coordination-Induced Radical Generation: Selective Hydrogen Atom Abstraction via Controlled Ti-C σ-Bond Homolysis

A method for the generation of transient alkyl radicals via homolytic Ti-C bond cleavage was developed by employing a tailor-made organotitanium half-cage complex. In contrast to established metal-mediated radical initiation protocols via thermal or photochemical M-C σ-bond homolysis, radical formation is triggered solely by coordination of a solvent molecule (thf) to a titanium(IV) center. During the reaction, the nonstabilized alkyl radical is formed along with a persistent titanium(III) metalloradical, thus taming the former transient radical (persistent radical effect). Radical coupling and hydrogen atom abstraction (HAT) reactions have been explored not only experimentally but also computationally and by means of kinetic analysis. Exploiting these findings led to the development of selective HAT transformations, for example, with 9,10-dihydroanthracene. Deuterium labeling studies using selectively deuterated alkyls and 9,10-dihydroanthracene-d4 confirmed a radical pathway, which was underpinned by developing a radical-radical cross-coupling reaction for transferring the alkyl radical to a stable Sn-centered radical. To set the stage for an application in organic synthesis, a 5-endo-trig radical cyclization based on our methodology was established, and a dihydroxylated sesquiterpene was thus prepared in high diastereomeric excess.

Visible-light induced C(sp3)-H arylation of glycine derivatives by cerium catalysis

A Ce(III)-catalyzed, visible-light induced aerobic oxidative dehydrogenative coupling reaction between glycine derivatives and electron-rich arenes is disclosed. The protocol proceeds efficiently under mild conditions, providing an efficient method for the rapid synthesis of α-arylglycine derivatives without the need for an external photosensitizer and additional oxidant. Moreover, this protocol could be performed on a 5 mmol scale, without obvious reduction of the efficiency.

Catalytic C-H Trifluoromethylation of Arenes and Heteroarenes via Visible Light Photoexcitation of a Co(III)-CF3 Complex

A cobalt photocatalyst for direct trifluoromethylation of (hetero)arene C(sp2)-H bonds is described and shown to operate via visible light activation of a Co-CF3 intermediate, which functions as a combined chromophore and organometallic reaction center. Chemical oxidations of previously reported (OCO)Co complexes containing a redox-active [OCO] pincer ligand afford a Co-CF3 complex two oxidation states above Co(II). Computational and spectroscopic studies are consistent with formulation of the product as [(OCO•)CoIII(CF3)(THF)(OTf)] (II) containing an open-shell [OCO•]1- radical ligand bound to a S = 0 Co(III) center. II is thermodynamically stable, but exposure to blue (440 nm) light induces Co-CF3 bond homolysis and release of •CF3, which is trapped by radical acceptors including TEMPO•, (hetero)arenes, or the radical [OCO•] ligand in II. The latter comprises a competitive degradation pathway, which is overcome under catalytic conditions by using excess substrate. Accordingly, generation of II from the reaction of [(OCO)CoIIL] (III) (L = THF, MeCN) with Umemoto's dibenzothiophenium trifluoromethylating reagent (1) followed by photolytic Co-CF3 bond activation completes a photoredox catalytic cycle for C-H (hetero)arene trifluoromethylation utilizing visible light. Electronic structure and photophysical studies, including time-dependent density functional theory (TDDFT) calculations, suggest that Co-CF3 bond homolysis at II occurs via an ligand-to-metal charge-transfer (LMCT) (OCO0)CoII(CF3) state, revealing ligand redox activity as a critical design feature and establishing design principles for the use of base metal chromophores for selectivity in photoredox bond activations occurring via free radical intermediates.

Visible-Light-Enabled Lanthanum-Mediated Intramolecular Epoxy-Ring Opening/Dehydrogenative Lactonization

Catalytic C(sp3)-H functionalization has afforded great opportunities to prepare organic substances, facilitating the derivatization of complex drugs and natural molecules. This letter describes an efficient and practical protocol for lanthanum-catalyzed continuous epoxy-ring opening and oxidative dehydrogenative lactonization under visible-light irradiation. Notably, the lanthanum catalyst also acts as a photocatalyst while acting as a Lewis acid in this reaction; therefore, no additional photocatalyst is required. We can conveniently prepare a series of diverse isochromanones with oxygen-containing spirocyclic structural units under a balloon-oxygen atmosphere at room temperature. Mechanistic studies and control experiments reveal that the in situ-generated lanthanum bromide should be crucial in the reaction.

One-Pot Synthesis of Sulfonamides from Unactivated Acids and Amines via Aromatic Decarboxylative Halosulfonylation

The coupling of carboxylic acids and amines to form amide linkages is the most commonly performed reaction in the pharmaceutical industry. Herein, we report a new strategy that merges these traditional amide coupling partners to generate sulfonamides, important amide bioisosteres. This method leverages copper ligand-to-metal charge transfer (LMCT) to convert aromatic acids to sulfonyl chlorides, followed by one-pot amination to form the corresponding sulfonamide. This process requires no prefunctionalization of the native acid or amine and extends to a diverse set of aryl, heteroaryl, and s-rich aliphatic substrates. Further, we extend this strategy to the synthesis of (hetero)aryl sulfonyl fluorides, which have found utility as "click" handles in chemical probes and programmable bifunctional reagents. Finally, we demonstrate the utility of these protocols in pharmaceutical analogue synthesis.

Photoredox and Copper Dual-Catalyzed Cyclization of Alkyne-tethered α-Bromocarbonyls

The synergistic systems of photoredox and copper catalyst have already appeared as a novel formation of green synthetic chemistry, which open new avenues for chemical synthesis applications. We describe a novel strategy for the cyclization of alkyne-tethered α-bromocarbonyls initiated by the cleavage of C(sp3 )-Br bond via the collaboration of photoredox and copper catalyst. The present protocol exhibits mildness using economical copper catalyst and visible-light at room temperature. The gram-scale and sunlight irradiation experiments proceeded smoothly to show the practicality of the methodology. It is notable that the newly generated oxygen in the product originates from H2 O.

Unleashing the photocatalytic potential of a noble-metal-free heteroleptic copper complex-based nanomaterial for an enhanced aza-Henry reaction

In this work, we fabricated a versatile and noble metal free copper-based heterogeneous photocatalyst, representing a green shift away from precious group metals such as Ir, Ru, Pt, which have been widely utilized as photocatalysts. The successfully synthesized and characterized copper photocatalyst was employed to establish a cross dehydrogenative coupling via C-H activation between tertiary amines and carbon nucleophiles. The highly efficient copper-based photocatalyst was characterized by numerous physico-chemical techniques, which confirmed its successful formation as well as its high activity. Inductively coupled plasma (ICP-OES) analysis revealed that the composite Cu@Xantphos@ASMNPs had a very high loading of 0.423 mmol g-1 of copper. The magnetic Cu@Xantphos@ASMNPs were utilized as a potential heterogeneous photocatalyst for the very facile and regioselective conversion of aryl tetrahydroqinoline to the respective nitroalkyl aryl tetrahydroisoquinoline in high yield using air as an oxidant and methanol as a green solvent with irradiation with visible light under mild reaction conditions. Additionally, the catalyst shows exceptional chemical stability and reusability without any agglomeration even after several cycles of use, which is one of the key features of this material, rendering it a potential candidate from economic and environmental perspectives.

FeCl3-catalyzed oxidative amidation of benzylic C-H bonds enabled by a photogenerated chlorine-radical

Herein, we report the development of iron-catalyzed benzylic C-H oxidative amidation reactions via photoinduced ligand-to-metal charge transfer (LMCT). These reactions exhibit a broad substrate scope (60 examples) and offer operationally simple, scalable procedures for accessing valuable products from methylarenes in a single step. Mechanistic studies and control experiments confirm the participation of a photogenerated chlorine radical in facilitating the hydrogen atom transfer (HAT) from the benzylic C-H bond to initiate the reaction.

Trinuclear Gold-Catalyzed 1,2-Difunctionalization of Alkenes

Activated alkyl halides have been extensively explored to generate alkyl radicals with Ru- and Ir- photocatalysts for 1,2-difunctionalization of alkenes, but unactivated alkyl bromides remain challenging substrates due to their strong reduction potential. Here we report a three-component 1,2-difunctionalization reaction of alkenes, unactivated alkyl bromides and nucleophiles (e.g., amines and indoles) using a trinuclear gold catalyst [Au3 (tppm)2 ](OTf)3 . It can achieve the 1,2-aminoalkylation and 1,2-alkylarylation readily. This protocol has a broad reaction scope and excellent functional group compatibility (>100 examples with up to 96 % yield). It also affords a robust formal [2+2+1] cyclization strategy for the concise construction of pyrrolidine skeletons under mild reaction conditions. Mechanistic studies support an inner-sphere single electron transfer pathway for the successful cleavage of inert C-Br bonds.

Emerging Trends in Copper-Promoted Radical-Involved C-O Bond Formations

The C-O bond is ubiquitous in biologically active molecules, pharmaceutical agents, and functional materials, thereby making it an important functional group. Consequently, the development of C-O bond-forming reactions using catalytic strategies has become an increasingly important research topic in organic synthesis because more conventional methods involving strong base and acid have many limitations. In contrast to the ionic-pathway-based methods, copper-promoted radical-mediated C-O bond formation is experiencing a surge in research interest owing to a renaissance in free-radical chemistry and photoredox catalysis. This Perspective highlights and appraises state-of-the-art techniques in this burgeoning research field. The contents are organized according to the different reaction types and working models.

Direct C(sp3)-H Acylation by Mechanistically Controlled Ni/Ir Photoredox Catalysis

ConspectusSynthetic chemists have consistently aimed to develop efficient methods for synthesizing ketones, which are essential building blocks in organic chemistry and play significant roles in bioactive molecules. Recent efforts have focused on using photoredox catalysis, which enables previously inaccessible activation modes, to synthesize ketones through the cross-coupling of an acyl electrophile and simple C(sp3)-H bonds. Over the past few years, we have worked on developing effective and versatile approaches for directly acylating activated hydrocarbons to forge ketones.Initially, thioesters were explored as the acyl source to achieve the direct acylation of ethers, but an unexpected thioesterification reaction was observed instead. To gain insights into this reactivity, we conducted the optimization of reaction conditions, substrate scope evaluation, and mechanistic studies. Drawing from our understanding of Ni/Ir photocatalysis obtained in this study, we subsequently developed a method for the direct acylation of simple hydrocarbons. The use of less-reactive amides as the acyl electrophiles was found to be critical for suppressing undesired pathways. This seemingly counterintuitive reactivity was carefully studied, revealing a substrate-assisted reaction mechanism in which the suppressed oxidative addition leads to early-stage nickel oxidation and C-H activation.To address the drawbacks of this method, which primarily arose from decarbonylative and transmetallative side pathways, we employed N-acyllutidiniums as the acyl electrophile. This prevented undesired decomposition pathways, enabling the use of α-chiral acyl substrates with the retention of their stereochemistry, particularly those derived from α-amino acids. The developed versatile methodology allowed us to access a diverse range of α-amino ketones and their homologues.Despite the elegant utility of Ni/photoredox catalysis in developing new synthetic methodologies, the precise behavior of nickel catalysts under redox conditions is incompletely understood. To gain insight into this behavior and develop new chemical reactions, we used a combination of experimental and computational methods. Our investigations revealed that devised adjustments to the reaction conditions in nickel/photoredox catalysis can result in significant differences in the reaction outcomes, providing chemists with opportunities to tailor reactions through carefully designed mechanistic strategies. We believe that continued efforts to study and apply nickel redox modulation will lead to the discovery of additional organic transformations.

Merging Cu(I) and Cu(II) Photocatalysis: Development of a Versatile Oxohalogenation Protocol for the Sequential Cu(II)/Cu(I)-Catalyzed Oxoallylation of Vinylarenes

A sequential photocatalytic strategy is developed via the merger of Cu(II)/Cu(I)-catalytic cycles for the oxoallylation of vinyl arenes via α-haloketones. The initial Cu(II)-photocatalyzed oxohalogenation exploits ligand-to-metal charge transfer (LMCT) to generate halide radicals from acyl halides utilizing air as a terminal oxidant and can be employed for the late-stage modification of pharmaceuticals and agrochemicals. α-Bromoketones obtained this way can be subsequently subjected to a one-pot Cu(I)-photocatalyzed allylation. This sequential photocatalysis proceeds in a highly regio- and chemoselective fashion and is inconsequential to the electronic nature of styrenes.

Photoredox catalysis harvesting multiple photon or electrochemical energies

Photoredox catalysis (PRC) is a cutting-edge frontier for single electron-transfer (SET) reactions, enabling the generation of reactive intermediates for both oxidative and reductive processes via photon activation of a catalyst. Although this represents a significant step towards chemoselective and, more generally, sustainable chemistry, its efficacy is limited by the energy of visible light photons. Nowadays, excellent alternative conditions are available to overcome these limitations, harvesting two different but correlated concepts: the use of multi-photon processes such as consecutive photoinduced electron transfer (conPET) and the combination of photo- and electrochemistry in synthetic photoelectrochemistry (PEC). Herein, we review the most recent contributions to these fields in both oxidative and reductive activations of organic functional groups. New opportunities for organic chemists are captured, such as selective reactions employing super-oxidants and super-reductants to engage unactivated chemical feedstocks, and scalability up to gram scales in continuous flow. This review provides comparisons between the two techniques (multi-photon photoredox catalysis and PEC) to help the reader to fully understand their similarities, differences and potential applications and to therefore choose which method is the most appropriate for a given reaction, scale and purpose of a project.

Electronic Structures and Photoredox Chemistry of Tungsten(0) Arylisocyanides

ConspectusThe high energy barriers associated with the reaction chemistry of inert substrates can be overcome by employing redox-active photocatalysts. Research in this area has grown exponentially over the past decade, as transition metal photosensitizers have been shown to mediate challenging organic transformations. Critical for the advancement of photoredox catalysis is the discovery, development, and study of complexes based on earth-abundant metals that can replace and/or complement established noble-metal-based photosensitizers.Recent work has focused on redox-active complexes of 3d metals, as photosensitizers containing these metals most likely would be scalable. Although low lying spin doublet ("spin flip") excited states of chromium(III) and metal-to-ligand charge transfer (MLCT) excited states of copper(I) have relatively long lifetimes, the electronic excited states of many other 3d metal complexes fall on dissociative potential energy surfaces, owing to the population of highly energetic σ-antibonding orbitals. Indeed, we and other investigators have shown that low lying spin singlet and triplet excited states of robust closed-shell metal complexes are too short-lived at room temperature to engage in bimolecular reactions in solutions. In principle, this problem could be overcome by designing and constructing 3d metal complexes containing strong field π-acceptor ligands, where thermally equilibrated MLCT or intraligand charge transfer excited states might fall well below the upper surfaces of dissociative 3d-3d states. Notably, such design elements have been exploited by investigators in very recent work on redox-active iron(II) systems. Another approach, one we have actively pursued, is to design and construct closed-shell complexes of earth-abundant 5d metals containing very strong π-acceptor ligands, where vertical excitation of 5d-5d excited states at the ground state geometry would require energies far above minima in the potential surfaces of MLCT excited states. As this requirement is met by tungsten(0) arylisocyanides, these complexes have been the focus of our work aimed at the development of robust redox-active photosensitizers.In the following Account, we review recent work on homoleptic tungsten(0) arylisocyanides. Originally reported by our group 45 years ago, W(CNAr)₆ complexes have exceptionally large one- and two-photon absorption cross-sections. One- or two-photon excitation produces relatively long-lived (hundreds of nanoseconds to microsecond) MLCT excited states in high yields. These MLCT excited states, which are very strong reductants with E°(W⁺/*W⁰) = -2.2 to -3.0 V vs Fc^[+/0], mediate photocatalysis of organic reactions with both visible and near-infrared (NIR) light. Here, we highlight design principles that led to the development of three generations of W(CNAr)₆ photosensitizers; and we discuss likely steps in the mechanism of a prototypal W(CNAr)₆-catalyzed base-promoted homolytic aromatic substitution reaction. Among the many potential applications of these very bright luminophores, two-photon imaging and two-photon-initiated polymerization are ones we plan to pursue.