Ultrastable and Efficient Visible-light-driven CO2 Reduction Triggered by Regenerative Oxygen-Vacancies in Bi2 O2 CO3 Nanosheets

Oxygen Vacancy Piezoelectric Nanosheets Constructed by a Photoetching Strategy for Ultrasound "Unlocked" Tumor Synergistic Therapy

Piezoelectric dynamic therapy (PzDT) is an effective method of tumor treatment by using piezoelectric polarization to generate reactive oxygen species. In this paper, two-dimensional Cu-doped BiOCl nanosheets with surface vacancies are produced by the photoetching strategy. Under ultrasound, a built-in electric field is generated to promote the electron and hole separation. The separated carriers achieve O2 reduction and GSH oxidation, inducing oxidative stress. The bandgap of BiOCl is narrowed by introducing surface oxygen vacancies, which act as charge traps and facilitate the electron and hole separation. Meanwhile, Cu doping induces chemodynamic therapy and depletes GSH via the transformation from Cu(II) to Cu(I). Both in vivo and in vitro results confirmed that oxidative stress can be enhanced by exogenous ultrasound stimulation, which can cause severe damage to tumor cells. This work emphasizes the efficient strategy of doping engineering and defect engineering for US-activated PzDT under exogenous stimulation.

Defect Engineering in Bi-Based Photo/Electrocatalysts for Nitrogen Reduction to Ammonia

Main group Bi-based materials have gained popularity as N2 reduction reaction (NRR) photo/electrocatalysts due to their ability to inhibit competitive H2 evolution reactions (HER) and the unique N2 adsorption activities. The introduction of defects in Bi-based catalysts represents a highly effective strategy for enhancing light absorption, promoting efficient separation of photogenerated carriers, optimizing the activity of free radicals, regulating electronic structure, and improving catalytic performance. In this review, we outline the various applications of state of the defect engineering in Bi-based catalysts and elucidate the impact of vacancies on NRR performance. In particular, the types of defects, methods of defects tailoring, advanced characterization techniques, as well as the Bi-based catalysts with abundant defects and their corresponding catalytic behavior in NRR were elucidated in detail. Finally, the main challenges and opportunities for future development of defective Bi-based NRR catalysts are discussed, which provides a comprehensive theoretical guidance for this field.

Engineering catalytic defects via molecular imprinting for high energy Li-S pouch cells

Heterogeneous catalysis promises to accelerate sulfur-involved conversion reactions in lithium-sulfur batteries. Solid-state Li2S dissociation remains as the rate-limiting step because of the weakly matched solid-solid electrocatalysis interfaces. We propose an electrochemically molecular-imprinting strategy to have a metal sulfide (MS) catalyst with imprinted defects in positions from which the pre-implanted Li2S has been electrochemically removed. Such tailor-made defects enable the catalyst to bind exclusively to Li atoms in Li2S reactant and elongate the Li-S bond, thus decreasing the reaction energy barrier during charging. The imprinted Ni3S2 catalyst shows the best activity due to the highest defect concentration among the MS catalysts examined. The Li2S oxidation potential is substantially reduced to 2.34 V from 2.96 V for the counterpart free of imprinted vacancies, and an Ah-level pouch cell is realized with excellent cycling performance. With a lean electrolyte/sulfur ratio of 1.80 μL mgS -1, the cell achieves a benchmarkedly high energy density beyond 500 Wh kg-1.

Biomass-Derived Carbon Quantum Dots Chemical Bonding with Sn-Doped Bi2O2CO3 Endowed Fast Carriers' Dynamics and Stabilized Oxygen Vacancies for Efficient Decontamination of Combined Pollutants

Surface defects on photocatalysts could promote carrier separation and generate unsaturated sites for chemisorption and reactant activation. Nevertheless, the inactivation of oxygen vacancies (OVs) would deteriorate catalytic activity and limit the durability of defective materials. Herein, bagasse-derived carbon quantum dots (CQDs) are loaded on the Sn-doped Bi2O2CO3 (BOC) via hydrothermal procedure to create Bi─O─C chemical bonding at the interface, which not only provides efficient atomic-level interfacial electron channels for accelerating carriers transfer, but also enhances durability. The optimized Sn-BOC/CQDs-2 achieves the highest photocatalytic removal efficiencies for levofloxacin (LEV) (88.7%) and Cr (VI) (99.3%). The elimination efficiency for LEV and Cr (VI) from the Sn-BOC/CQDs-2 is maintained at 55.1% and 77.0% while the Sn-BOC is completely deactivated after four cycle tests. Furthermore, the key role of CQDs in stabilization of OVs is to replace OVs as the active center of H2O and O2 adsorption and activation, thereby preventing reactant molecules from occupying OVs. Based on theoretical calculations of the Fukui index and intermediates identification, three possible degradation pathways of LEV are inferred. This work provides new insight into improving the stability of defective photocatalysts.

Room-Temperature Sensing Mechanism of GQDs/BiSbO4 Nanorod Clusters: Experimental and Density Functional Theory Study

Creating high-performance gas sensors for heptanal detection at room temperature demands the development of sensing materials that incorporate distinct spatial configurations, functional components, and active surfaces. In this study, we employed a straightforward method combining hydrothermal strategy with ultrasonic processing to produce mesoporous graphene quantum dots/bismuth antimonate (GQDs/BiSbO4) with nanorod cluster forms. The BiSbO4 was incorporated with appropriate contents of GQDs resulting in significantly improved attributes such as heightened sensitivity (59.6@30 ppm), a lower threshold for detection (356 ppb), and quicker period for response (40 s). A synergistic mechanism that leverages the inherent advantages of BiSbO4 was proposed, while its distinctive mesoporous hollow cubic structure, the presence of oxygen vacancies, and the catalytic enhancement provided by GQDs lead to a marked improvement in heptanal detection. This work introduces a straightforward and effective method for crafting sophisticated micro-nanostructures that optimize spatial design, functionality, and active mesoporous surfaces, showing great promise for heptanal sensing applications.

Unveiling Dynamic Structure and Bond Evolutions in BiOIO3 Photocatalysts during CO2 Reduction

We have established a correlation between photocatalytic activity and dynamic structure/bond evolutions of BiOIO3-based photocatalysts during CO2 reduction by combining operando X-ray diffraction with photoelectron spectroscopy. More specifically, the selective photo-deposition of PtOx species on BiOIO3 (010) facets could effectively promote the electron enrichment on Bi active sites of (100) facets for facilitating the adsorption/activation of CO2 molecules, leading to the formation of Bi sites with high oxidation state and the shrink of crystalline structures. With introducing light irradiation to drive CO2 reduction, the Bi active sites with high oxidation states transformed into normal Bi3+ state, accompanying with the expansion of crystalline structures. Owing to the dynamic structure, bond, and chemical-state evolutions, a significant improvement of photocatalytic activity for CO evolution has been achieved on PtOx-BiOIO3 (195.0 μmol g-1 ⋅ h-1), much higher than the pristine (61.9 μmol g-1 ⋅ h-1) as well as metal-Pt decorated BiOIO3 (70.3 μmol g-1 ⋅ h-1) samples. This work provides new insights to correlate the intrinsically dynamic structure/bond evolutions with CO2 reduction activity, which may help to guide future photocatalyst design.

Dynamic ion exchange engineering bismuth ferrite-derived Bi2O2CO3 for rapid piezo-photocatalytic degradation of tetracycline

Piezoelectric materials can generate the built-in electric field under ultrasound assistance, which is beneficial to the separation of the photogenerated electron-hole pairs in photocatalysis. Meanwhile, the ultrasound stress usually leads to accelerate electron transfer and enhance catalytic activity. Thus, piezo-photocatalysis technique is believed to be one of the effective techniques for organic pollutant degradation. In this work, a binary piezoelectric integrated piezo-photocatalytic Z-Scheme heterojunction with bismuth ferrite (BFO) and bismuth oxycarbonate (Bi2O2CO3, BOC) based on the in situ production of Bi2O2CO3 on Bi25FeO40 surface in dichloromethane, where Bi25FeO40 was employed as piezoelectric materials and Bi source, CO2 dissolved in dichloromethane was used as carbon source. Under 60 min ultrasound and visible light irradiation, the optimal BFO/BOC presented a higher piezo-photocatalytic tetracycline (TC) degradation rate (95 %) than Bi25FeO40 (30 %) and Bi2O2CO3 (17 %). Moreover, the optimal BFO/BOC illustrated higher piezo-photocatalytic TC degradation rate under ultrasound and visible light irradiation than that under visible light condition and ultrasound condition, respectively. These results strongly demonstrated the synergistically piezo-photocatalytic degradation of TC by BFO and BOC. This work not only provides a novel piezo-photocatalyst for pollutant degradation, but also provides a novel method to prepare Bi2O2CO3-based piezo-photocatalytic composite catalyst.

Preparation of Novel Layered High Entropy Bismuth-Based Materials and their Photocatalytic Degradation Mechanism

We prepared BiOCl, BiO(ClBr), BiO(ClBrI), and BiO[ClBrI(CO3)0.5] materials using a simple coprecipitation method. It was found that adjusting the number of anions in the anion layer was conducive to adjusting the band structure of BiOX and could effectively promote the migration and separation of photogenerated carriers, thus improving the photocatalytic activity. We first selected methyl orange (MO) as the study pollutant and compared it with BiOCl, BiO(ClBr), and BiO(ClBrI). The first-order kinetic constants of MO degradation by BiO[ClBrI(CO3)0.5] increased by 90.3, 33.9, and 3.1 times, respectively. The photocatalytic degradation rate of methylene blue by BiO[ClBrI(CO3)0.5] was 89.5%, indicating the excellent photocatalytic performance of BiO[ClBrI(CO3)0.5]. The stability of BiO[ClBrI(CO3)0.5] was demonstrated through cyclic experiments and XRD analysis before and after the reaction. The photocatalytic degradation of MO by BiO[ClBrI(CO3)0.5] showed that h+ and 1O2 were the main active oxidizing species and •O2- was the secondary active substance. Overall, our work provides new ideas for the synthesis and degradation of organic pollutants by using two-dimensional anionic high-entropy materials.

Synthesis of Double Trivalent Perovskite Quantum Dots Cs3BiSbX9 (X = Cl, Br, I) for Efficient CO2 Photoreduction Performance

Non-toxic Bi halides have great potential in the field of CO2 photoreduction, but strong charge localization limits their charge separation and transfer. In this study, a series of Cs3BiSbX9 (X = Cl, Br, I) perovskite quantum dots (PQDs) are synthesized by antisolvent recrystallization at room temperature, in which Cs3BiSbBr9 PQDs has high selectivity (94.51%) and yield (15.32 µmol g-1 h-1) of CO2 to CO. In situ DRIFTS and theoretical calculations suggest that the surface charge can be tailored by halogen modulation, allowing for the customization of intermediate species. The Bi─Br─Sb symmetric charge distribution induced by the halogen Br promotes the formation of b─HCOO and reduces the reaction energy barrier of the rate-limiting step, while the weak electronegativity of Cl and the high electronegativity of I leads to m─HCOO and ─COOH production, which are detrimental to CO generation. This work provides new insights into the design of halide alloy perovskites for CO2 photoreduction.

Reinforcing 2D Single-Crystal Bi2O2CO3 with Additional Interlayer Carbonates by CO2-Assisted Solid-to-Solid Phase Transition

A facile gaseous CO2 mediated solid-to-solid transformation principle is adopted to insert additional CO3 2- anions into the thin single-crystal nanosheets of Bi2O2CO3, which is built of periodic arrays of intrinsic CO3 2- anions and (Bi2O2)2+ layers. The additional CO3 2- anions create abundant defects. The Bi2O2CO3 nanosheets with rich interlayer CO3 2- exhibit superior electronic properties and charge transfer kinetics than the pristine single-crystal 2D Bi2O2CO3 and display enhanced catalytic activity in photocatalytic CO2 reduction reaction and the photocatalytic oxidative degradation of organic pollutants. This work thus illustrates interlayer engineering as a flexible means to build layered 2D materials with excellent properties.

Preparation of highly dispersed Ni single-atom doped ultrathin g-C3N4 nanosheets by metal vapor exfoliation for efficient photocatalytic CO2 reduction

Single-atom photocatalysts can modulate the utilization of photons and facilitate the migration of photogenerated carriers. However, the preparation of single-atom uniformly doped photocatalysts is still a challenging topic. Herein, we propose the preparation of Ni single-atom doped g-C3N4 photocatalysts by metal vapor exfoliation. The Ni vapor produced by calcining nickel foam at high temperature accumulates in between g-C3N4 layers and poses a certain vapor pressure to destroy the interlayer van der Waals forces of g-C3N4. Individual metal atoms are doped into the structure while exfoliating g-C3N4 into nanosheets by metal vapor. Upon optimization of Ni content, the Ni single atom doped g-C3N4 nanosheets with 2.81 wt% Ni exhibits the highest CO2 reduction performance in the absence of sacrificial agents. The generation rates of CO and CH4 are 19.85 and 1.73 μmol g-1h-1, respectively. The improved photocatalytic performance is attributed to the anchoring Ni of single atoms on g-C3N4 nanosheets, which increases both carrier separation efficiency and reaction sites. This work provides insight into the design of photocatalysts with highly dispersed single-atom.

Enhanced photocatalytic performance of Bi2O2CO3/Bi4O5Br2/reduced graphene oxide Z-schemehe terojunction via a one-pot room-temperature synthesis

Bi2O2CO3(BOC)/Bi4O5Br2(BOB)/reduced graphene oxide (rGO) Z-scheme heterojunction with promising photocatalytic properties was synthesized via a facile one-pot room-temperature method. Ultra-thin nanosheets of BOC and BOB were grown in situ on rGO. The formed 2D/2D direct Z-scheme heterojunction of BOC/BOB with oxygen vacancies (OVs) effectively leads to lower negative electron reduction potential of BOB as well as higher positive hole oxidation potential of BOC, showing improved reduction/oxidation ability. Particularly, rGO is an acceptor of the electrons from the conduction band of BOC. Its dual roles significantly improve the transfer performance of photo-induced charge carriers and accelerate their separation. With layered nanosheet structure, rich OVs, high specific surface area, and increased utilization efficiency of visible light, the multiple synergistic effects of BOC/BOB/rGO can achieve effective generation and separation of the electron-holes, thereby generating more •O2- and h+. The photocatalytic reduction efficiency of CO2 to CO (12.91 µmol/(g·hr)) is three times higher than that of BOC (4.18 µmol/(g·hr)). Moreover, it also achieved almost 100% removal of Rhodamine B and cyanobacterial cells within 2 hours.

Disclosing Support-Size-Dependent Effect on Ambient Light-Driven Photothermal CO2 Hydrogenation over Nickel/Titanium Dioxide

The size of support in heterogeneous catalysts can strongly affect the catalytic property but is rarely explored in light-driven catalysis. Herein, we demonstrate the size of TiO2 support governs the selectivity in photothermal CO2 hydrogenation by tuning the metal-support interactions (MSI). Small-size TiO2 loading nickel (Ni/TiO2 -25) with enhanced MSI promotes photo-induced electrons of TiO2 migrating to Ni nanoparticles, thus favoring the H2 cleavage and accelerating the CH4 formation (227.7 mmol g-1  h-1 ) under xenon light-induced temperature of 360 °C. Conversely, Ni/TiO2 -100 with large TiO2 prefers yielding CO (94.2 mmol g-1  h-1 ) due to weak MSI, inefficient charge separation, and inadequate supply of activated hydrogen. Under ambient solar irradiation, Ni/TiO2 -25 achieves the optimized CH4 rate (63.0 mmol g-1  h-1 ) with selectivity of 99.8 %, while Ni/TiO2 -100 exhibits the CO selectivity of 90.0 % with rate of 30.0 mmol g-1  h-1 . This work offers a novel approach to tailoring light-driven catalytic properties by support size effect.

Accelerated Photocatalytic Carbon Dioxide Reduction and Water Oxidation under Spatial Synergy

Photocatalytic conversion of CO2 and H2 O into fuels and oxygen is a highly promising solution for carbon-neutral recycling. Traditionally, researchers have studied CO2 reduction and H2 O oxidation separately, overlooking potential synergistic interplay between these processes. This study introduces an innovative approach, spatial synergy, which encourages synergistic progress by bringing the two half-reactions into atomic proximity. To facilitate this, we developed a defective ZnIn2 S4 -supported single-atom Cu catalyst (Cu-SA/D-ZIS), which demonstrates remarkable catalytic performance with CO2 reduction rates of 112.5 μmol g-1  h-1 and water oxidation rates of 52.3 μmol g-1  h-1 , exhibiting a six-fold enhancement over D-ZIS. The structural characterization results indicated that the trapping effect of vacancy associates on single-atom copper led to the formation of an unsaturated coordination structure, Cu-S3 , consequently giving rise to the CuZn 'VS ⋅⋅VZn " defect complexes. FT-IR studies coupled with theoretical calculations reveal the spatially synergistic CO2 reduction and water oxidation on CuZn 'VS ⋅⋅VZn ", where the breakage of O-H in water oxidation is synchronized with the formation of *COOH, significantly lowering the energy barrier. Notably, this study introduces and, for the first time, substantiates the spatial synergy effect in CO2 reduction and H2 O oxidation through a combination of experimental and theoretical analyses, providing a fresh insight in optimizing photocatalytic system.

Construction of bismuth oxide iodide (BiOI)/zinc titanium oxide (Zn2TiO4) p-n heterojunction nanofibers with abundant oxygen vacancies for improving photocatalytic carbon dioxide reduction

The conversion of carbon dioxide (CO2) into value-added syngas represents an effective approach for addressing both environmental issues and carbon neutrality issue. However, the slow charge dynamics and low CO2 affinity severely limit the photocatalytic CO2 reduction reaction. In this study, bismuth oxide iodide (BiOI)/zinc titanium oxide (Zn2TiO4) composite nanofibers were successfully prepared by immobilizing BiOI nanosheets on Zn2TiO4 electrospun nanofibers through a solvothermal reaction method. The results of photocatalytic research indicate that the BiOI/Zn2TiO4 composite nanofibers exhibit improved photocatalytic activity in CO2 reduction compared to pristine BiOI nanosheets and Zn2TiO4 nanofibers. The highest carbon monoxide (CO) release rate of BiOI/Zn2TiO4 nanofibers could reach 9.10 µmol‧g-1‧h-1, which is 18.6 times and 6.6 times higher than that of pristine BiOI nanosheets and Zn2TiO4 nanofibers, respectively. The enhanced photocatalytic activity can be credited to the formed BiOI/Zn2TiO4 p-n heterojunction, which can boost electron separation, reduce charge recombination at the interface, and promote the reaction process. The presence of oxygen vacancies in BiOI/Zn2TiO4 nanofibers can not only provide active site to facilitate the adsorption and activation of CO2 molecules, but also adjust the energy band structure of the catalyst to accelerate carriers transfer. After four cycles of testing, the CO release rate of BiOI/Zn2TiO4 nanofibers remains nearly constant, demonstrating its excellent stability. This work develops a feasible strategy to improve the efficiency of photoreduction of CO2 through energy band engineering and surface defect technology.

The Synergistic Effect between Metal and Sulfur Vacancy to Boost CO2 Reduction Efficiency: A Study on Descriptor Transferability and Activity Prediction

Both metal center active sites and vacancies can influence the catalytic activity of a catalyst. A quantitative model to describe the synergistic effect between the metal centers and vacancies is highly desired. Herein, we proposed a machine learning model to evaluate the synergistic index, PSyn, which is learned from the possible pathways for CH4 production from CO2 reduction reaction (CO2RR) on 26 metal-anchored MoS2 with and without sulfur vacancy. The data set consists of 1556 intermediate structures on metal-anchored MoS2, which are used for training. The 2028 structures from the literature, comprising both single active site and dual active sites, are used for external test. The XGBoost model with 3 features, including electronegativity, d-shell valence electrons of metal, and the distance between metal and vacancy, exhibited satisfactory prediction accuracy on limiting potential. Fe@Sv-MoS2 and Os@MoS2 are predicted to be promising CO2RR catalysts with high stability, low limiting potential, and high selectivity against hydrogen evolution reactions (HER). Based on some easily accessible descriptors, transferability can be achieved for both porous materials and 2D materials in predicting the energy change in the CO2RR and nitrogen reduction reaction (NRR). Such a predictive model can also be applied to predict the synergistic effect of the CO2RR in other oxygen and tungsten vacancy systems.

Subnanometric Bismuth Clusters Confined in Pyrochlore-Bi2 Sn2 O7 Enable Remarkable CO2 Photoreduction

The development of highly efficient photocatalysts for conversion of carbon dioxide (CO2 ) with water (H2 O) into chemical fuels is of great importance for energy sustainability and carbon resource utilization. Herein, we demonstrated a facile hydrothermal method for in situ construction of subnanometric Bi metallic clusters in pyrochlore-Bi2 Sn2 O7 frameworks, leading to the remarkable improvements of photocatalytic performances for CO2 reduction into CO in the absence of sacrificial reagent. More specifically, an outstanding CO evolution activity of 114.1 μmol g-1  h-1 has been achieved, more than 20-fold improvement compared with the pristine Bi2 Sn2 O7 (5.7 μmol g-1  h-1 ). Detailed experiments together with in situ characterizations reveal that the spatially confined Bi clusters could significantly promote charge-separation/electron-enrichment and adsorption/activation of CO2 molecules, which provides highly efficient reaction channels to facilitate the generation of *COOH intermediate as well as the subsequent desorption of *CO towards CO formation. These demonstrations provide an important knowledge for precise design and fabrication of highly efficient photocatalysts for CO2 conversion into solar fuels.

Stabilizing Undercoordinated Zn Active Sites through Confinement in CeO2 Nanotubes for Efficient Electrochemical CO2 Reduction

Zn-based catalysts hold great potential to replace the noble metal-based ones for CO2 reduction reaction (CO2 RR). Undercoordinated Zn (Znδ+ ) sites may serve as the active sites for enhanced CO production by optimizing the binding energy of *COOH intermediates. However, there is relatively less exploration into the dynamic evolution and stability of Znδ+ sites during CO2 reduction process. Herein, we present ZnO, Znδ+ /ZnO and Zn as catalysts by varying the applied reduction potential. Theoretical studies reveal that Znδ+ sites could suppress HER and HCOOH production to induce CO generation. And Znδ+ /ZnO presents the highest CO selectivity (FECO 70.9 % at -1.48 V vs. RHE) compared to Zn and ZnO. Furthermore, we propose a CeO2 nanotube with confinement effect and Ce3+ /Ce4+ redox to stabilize Znδ+ species. The hollow core-shell structure of the Znδ+ /ZnO/CeO2 catalyst enables to extremely expose electrochemically active area while maintaining the Znδ+ sites with long-time stability. Certainly, the target catalyst affords a FECO of 76.9 % at -1.08 V vs. RHE and no significant decay of CO selectivity in excess of 18 h.

Experimental and theoretical revealing of piezo-photocatalyst Bi2O2CO3 for degradation of ciprofloxacin in water

In this report, we have attempted to experimentally and theoretically reveal a new piezo-photocatalyst Bi2O2CO3 for efficient removal of ciprofloxacin (CIP) from water. Bi2O2CO3 nanoplates were synthesized to evaluate their photocatalytic (irradiation source: simulated-sunlight), piezocatalytic (irradiation source: ultrasonic) and piezo-photocatalytic (irradiation source: simulated-sunlight and ultrasonic) performances for CIP elimination. Under the condition CCIP = 10 mg/L and Ccatalyst = 1 g/L, the piezo-photodegradation rate constant is obtained as kapp = 0.07811 min-1, which surpasses that of photocatalysis (kapp = 0.04686 min-1) and piezocatalysis (kapp = 0.01233 min-1); this phenomenon manifests an obvious piezo-enhanced photocatalytic behavior in terms of the "1 + 1 > 2" principle. The ultrasonic-induced piezoelectric behavior in Bi2O2CO3 nanoplates and involved piezo-photocatalytic mechanism were theoretically elucidated by density functional theory (DFT) and finite-element method (FEM) studies. Additionally, the effects of various factors on the CIP degradation, decomposition mechanism of CIP and toxicity of the decomposition intermediates were also analyzed.

Carbon Dioxide Anion Radicals Assisted Highly Efficient Photocatalytic H2O2 Production over Bi(C2O4)OH

Carbon dioxide anion radical (CO2•-) can act as a versatile single electron reductant, but its generation pathways are quite limited. Herein, we demonstrate that oxalic acid (OA) could be effectively and continuously utilized to produce CO2•- over Bi(C2O4)OH, a novel photocatalyst, under light irradiation. Bi(C2O4)OH would proceed with self-redox reactions under the light irradiation producing CO2•-, through the oxidation of C2O42-. OA in the solution could recoordinate with Bi3+, thus maintaining the structure of the photocatalysts and the stability of the reactions. Benefiting from the fast reaction between CO2•- and O2 in forming •O2-, hydrogen peroxide (H2O2) would be efficiently produced (219.0 μmol/h). This study proposes a novel approach for harnessing OA containing wastewater and explores its potential application in the efficient production of H2O2.

Copper-Sulfur-Nitrogen Cluster Providing a Local Proton for Efficient Carbon Dioxide Photoreduction

Atomically precise Cu clusters are highly desirable as catalysts for CO2 reduction reaction (CO2 RR), and they provide an appropriate model platform for elaborating their structure-activity relationship. However, an efficient overall photocatalytic CO2 RR with H2 O using assembled Cu-cluster aggregates as single component photocatalyst has not been reported. Herein, we report a stable crystalline Cu-S-N cluster photocatalyst with local protonated N-H groups (denoted as Cu6 -NH). The catalyst exhibits suitable photocatalytic redox potentials, high structural stability, active catalytic species, and a narrow band gap, which account for its outstanding photocatalytic CO2 RR performance under visible light, with ≈100 % selectivity for CO evolution. Remarkably, systematic isostructural Cu-cluster control experiments, in situ infrared spectroscopy, and density functional theory calculations revealed that the protonated pyrimidine N atoms in the Cu6 -NH cluster act as a proton relay station, providing a local proton during the photocatalytic CO2 RR. This efficiently lowers the energy barrier for the formation of the *COOH intermediate, which is the rate-limiting step, efficiently enhancing the photocatalytic performance. This work lays the foundation for the development of atomically precise metal-cluster-based photocatalysts.

Active-site stabilized Bi metal-organic framework-based catalyst for highly active and selective electroreduction of CO2 to formate over a wide potential window

Bismuth-based materials have been validated to be a kind of effective electrocatalyst for electrocatalytic CO2 reduction (ECR) to formate (HCOO-). However, the established studies still encounter the problems of low current density, low selectivity, narrow potential window, and poor catalyst stability. Herein, a bismuth-terephthalate framework (Bi-BDC MOF) material was successfully synthesized. The optimized Bi-BDC-120 °C exhibited excellent activity, selectivity, and durability for formate production. At an operating potential of -1.1 V vs. RHE in 0.1 mol L-1 KHCO3 electrolyte, the ECR catalyzed by Bi-BDC-120 °C achieved a Faraday efficiency (FE) of 97.2% towards formate generation, and the total current density reached about 30 mA cm-2. The operating potential window with FEformate values > 95% ranged in -0.9 to -1.5 V vs. RHE. The density-functional theory (DFT) calculation demonstrated that the (001) crystalline planes of Bi-BDC are preferable for the adsorption of CO2 and the conversion of *OCHO intermediates, thus ultimately promoting the electrocatalytic production of formate. Although the MOF structure of Bi-BDC-120 °C was insufficiently stabilized, the FEformate could be maintained at around 90% after 36 h of ECR operation. The long-term durability for formate production was attributed to the fact that the in situ reconstructed Bi2O2CO3 could retain the Bi-O active sites in the structure. These results offer an opportunity to design CO2 reduction electrocatalysts with high activity and selectivity for potential applications.

In Situ Loading of Cu Nanocrystals on CsCuCl3 for Selective Photoreduction of CO2 to CH4

Rational design and facile synthesis of efficient environmentally friendly all-inorganic lead-free halide perovskite catalysts are of great significance in photocatalytic CO2 reduction. Aiming at photogenerated charge carrier separation and CO2 reaction dynamics, in this paper, a CsCuCl3 /Cu nanocrystals (NCs) heterojunction catalyst is designed and synthesized via a simple acid-etching solution process by using Cu2 O as the sacrificed template. Due to the disproportionation reaction of Cu2 O induced by concentrated hydrochloric acid, Cu NCs can be deposited onto the surface of CsCuCl3 microcrystals directly and tightly. As revealed by photoelectrochemical analysis, in situ Fourier transform infrared spectra, etc., the Cu NCs contribute a lot to extracting photoelectrons of CsCuCl3 to improve the charge separation efficiency, regulating the CO2 adsorption and activation, and also stabilizing the reaction intermediates. Therefore, CsCuCl3 /Cu heterojunction exhibits a total electron consumption rate of 58.77 µmol g-1 h-1 , which is 2.9-fold of that of single CsCuCl3 . Moreover, high CH4 selectivity of up to 92.7% is achieved, which is much higher than that of CsCuCl3 (50.4%) and most lead-free halide perovskite-based catalysts. This work provides an ingenious but simple strategy to rationally design cocatalysts in situ decorated perovskite catalysts for manipulating both the catalytic activity and the product selectivity.

Efficient Proton Conductor Based on Bismuth Oxide Clusters and Polyoxometalates

Developing new solid-state electrolyte materials for improving the proton conductivity remains an important challenge. Herein, a novel two-dimensional layered solid-state proton conductor Bi2O2-SiW12 nanocomposite, based on silicotungstic acid (H4SiW12O40) and Bi(NO3)3·5H2O, was synthesized and characterized. The composite consists of a layered cation framework [Bi2O2]2+ and interlayer-embedded counteranionic [SiW12O40]4-, which forms continuous hydrogen bond (O-H···O) networks through the interaction of adjacent oxygen atoms on the surface of the [Bi2O2]2+ and oxygen atoms of the H4SiW12O40. Facile proton transfer along these pathways endows the Bi2O2-SiW12 (30:1) nanocomposite with an excellent proton conductivity of 3.61 mS cm-1 at 90 °C and 95% relative humidity, indicating that the nanocomposite has good prospects as a highly efficient proton conductor.

Dual Lewis Acid-Base Sites Regulate Silver-Copper Bimetallic Oxide Nanowires for Highly Selective Photoreduction of Carbon Dioxide to Methane

Highly selective photoreduction of CO2 to valuable hydrocarbons is of great importance to achieving a carbon-neutral society. Precisely manipulating the formation of the Metal1 ⋅⋅⋅C=O⋅⋅⋅Metal2 (M1 ⋅⋅⋅C=O⋅⋅⋅M2 ) intermediate on the photocatalyst interface is the most critical step for regulating selectivity, while still a significant challenge. Herein, inspired by the polar electronic structure feature of CO2 molecule, we propose a strategy whereby the Lewis acid-base dual sites confined in a bimetallic catalyst surface are conducive to forming a M1 ⋅⋅⋅C=O⋅⋅⋅M2 intermediate precisely, which can promote selectivity to hydrocarbon formation. Employing the Ag2 Cu2 O3 nanowires with abundant Cu⋅⋅⋅Ag Lewis acid-base dual sites on the preferred exposed {110} surface as a model catalyst, 100 % selectivity toward photoreduction of CO2 into CH4 has been achieved. Subsequent surface-quenching experiments and density functional theory (DFT) calculations verify that the Cu⋅⋅⋅Ag Lewis acid-base dual sites do play a vital role in regulating the M1 ⋅⋅⋅C=O⋅⋅⋅M2 intermediate formation that is considered to be prone to convert CO2 into hydrocarbons. This study reports a highly selective CO2 photocatalyst, which was designed on the basis of a newly proposed theory for precise regulation of reaction intermediates. Our findings will stimulate further research on dual-site catalyst design for CO2 reduction to hydrocarbons.

In Situ Fabrication of an S-Scheme NaNbO3/Bi2O2CO3 Heterojunction for Enhanced Performance in Photocatalytic Nitrogen Fixation

In this study, NaNbO3 microcubes were introduced during the preparation of Bi2O2CO3 nanosheets to construct a series of NaNbO3/Bi2O2CO3 heterojunctions with varying NaNbO3 content. Their photoactivities for N2 fixation were examined and compared. Results demonstrated that 7.5% NaNbO3/Bi2O2CO3 had the highest photoactivity. The NH3 production rate under simulated solar light is 453.1 μmol L-1 g-1 h-1, representing 2.0 and 3.8-fold increases compared to those of Bi2O2CO3 and NaNbO3, respectively. A comprehensive investigation encompassing the physical and chemical properties of the NaNbO3/Bi2O2CO3 photocatalyst was conducted. Bi2O2CO3 nanosheets were discovered to be distributed on the NaNbO3 microcubes surface. The addition of NaNbO3 exhibited nearly no effect on the photoabsorption performance and specific surface area of the Bi2O2CO3. However, the tight contact between NaNbO3 and Bi2O2CO3 and their appropriate band positions led to the formation of a heterojunction structure between them. The electron drift occurring in the interface region induces the creation of an internal electric field and energy band bending. This facilitates the transfer of photogenerated electrons and holes through an S-scheme mechanism, achieving efficient separation without compromising the redox performance. As a result, the NaNbO3/Bi2O2CO3 composite exhibits exceptional performance in the photocatalytic nitrogen fixation reaction. This study expands the application of S-scheme photocatalysts in the field of N2 reduction and provides insights into the preparation of efficient S-scheme photocatalysts.

Fundamentals and Challenges of Engineering Charge Polarized Active Sites for CO2 Photoreduction toward C2 Products

ConspectusGlobal warming and climatic deterioration are partly caused by carbon dioxide (CO2) emission. Given this, CO2 reduction into valuable carbonaceous fuels is a win-win route to simultaneously alleviate the greenhouse effect and the energy crisis, where CO2 reduction into hydrocarbon fuels by solar energy may be a potential strategy. Up to now, most of the current photocatalysts photoconvert CO2 to C1 products. It is extremely difficult to achieve production of C2 products, which have higher economic value and energy density, due to the kinetic challenge of C-C coupling of the C1 intermediates. Therefore, to realize CO2 photoreduction to C2 fuels, design of high-activity photocatalysts to expedite the C-C coupling is significant. Besides, the current mechanism for CO2 photoreduction toward C2 fuels is usually uncertain, which is possibly attributed to the following two reasons: (1) It is arduous to determine the actual catalytic sites for the C-C coupling step. (2) It is hard to monitor the low-concentration active intermediates during the multielectron transfer step.Most traditional metal-based photocatalysts usually possess charge balanced active sites that have the same charge density. In this aspect, the neighboring C1 intermediates may also show the same charge distribution, which would lead to dipole-dipole repulsion, thus preventing C-C coupling for producing C2 fuels. By contrast, photocatalysts with charge polarized active sites possess obviously different charge distributions in the adjacent C1 intermediates, which can effectively suppress the electrostatic repulsion to steer the C-C coupling. Based on this analysis, higher asymmetric charge density on the active sites would be more beneficial to anchoring between the adjacent intermediates and active atoms in catalysts, which can boost C-C coupling.In this Account, we summarize various strategies, including vacancy engineering, doping engineering, loading engineering, and heterojunction engineering, for tailoring charge polarized active sites to boost the C-C coupling for the first time. Also, we overview diverse in situ characterization technologies, such as in situ X-ray photoelectron spectroscopy, in situ Raman spectroscopy, and in situ Fourier transform infrared spectroscopy, for determining charge polarized active sites and monitoring reaction intermediates, helping to reveal the internal catalytic mechanism of CO2 photoreduction toward C2 products. We hope this Account may help readers to understand the crucial function of charge polarized active sites during CO2 photoreduction toward C2 products and provide guidance for designing and preparing highly active catalysts for photocatalytic CO2 reduction.

Phase Engineering and Synchrotron-Based Study on Two-Dimensional Energy Nanomaterials

In recent years, there has been significant interest in the development of two-dimensional (2D) nanomaterials with unique physicochemical properties for various energy applications. These properties are often derived from the phase structures established through a range of physical and chemical design strategies. A concrete analysis of the phase structures and real reaction mechanisms of 2D energy nanomaterials requires advanced characterization methods that offer valuable information as much as possible. Here, we present a comprehensive review on the phase engineering of typical 2D nanomaterials with the focus of synchrotron radiation characterizations. In particular, the intrinsic defects, atomic doping, intercalation, and heterogeneous interfaces on 2D nanomaterials are introduced, together with their applications in energy-related fields. Among them, synchrotron-based multiple spectroscopic techniques are emphasized to reveal their intrinsic phases and structures. More importantly, various in situ methods are employed to provide deep insights into their structural evolutions under working conditions or reaction processes of 2D energy nanomaterials. Finally, conclusions and research perspectives on the future outlook for the further development of 2D energy nanomaterials and synchrotron radiation light sources and integrated techniques are discussed.

Regulation of Bimetallic Coordination Centers in MOF Catalyst for Electrochemical CO2 Reduction to Formate

Electrocatalytic reduction of CO2 to valuable chemicals can alleviate the energy crisis, and solve the greenhouse effect. The key is to develop non-noble metal electrocatalysts with high activity, selectivity, and stability. Herein, bimetallic metal organic frameworks (MOFs) materials (BiZn-MOF, BiSn-MOF, and BiIn-MOF) were constructed by coordinating the metals Zn, In, Sn, and Bi with the organic ligand 3-amino-1H-1,2,4-triazole-5-carboxylic acid (H2atzc) through a rapid microwave synthesis approach. The coordination centers in bimetallic MOF catalyst were regulated to optimize the catalytic performance for electrochemical CO2 reduction reaction (CO2RR). The optimized catalyst BiZn-MOF exhibited higher catalytic activity than those of Bi-MOF, BiSn-MOF, and BiIn-MOF. BiZn-MOF exhibited a higher selectivity for formate production with a Faradic efficiency (FE = 92%) at a potential of -0.9 V (vs. RHE, reversible hydrogen electrode) with a current density of 13 mA cm-2. The current density maintained continuous electrolysis for 13 h. The electrochemical conversion of CO2 to formate mainly follows the *OCHO pathway. The good catalytic performance of BiZn-MOF may be attributed to the Bi-Zn bimetallic coordination centers in the MOF, which can reduce the binding energies of the reaction intermediates by tuning the electronic structure and atomic arrangement. This study provides a feasible strategy for performance optimization of bismuth-based catalysts.

Asymmetric gradient orbital interaction of hetero-diatomic active sites for promoting C - C coupling

Diatomic-site catalysts (DACs) garner tremendous attention for selective CO₂ photoreduction, especially in the thermodynamical and kinetical mechanism of CO₂ to C₂₊ products. Herein, we first engineer a novel Zn-porphyrin/RuCu-pincer complex DAC (ZnPor-RuCuDAC). The heteronuclear ZnPor-RuCuDAC exhibits the best acetate selectivity (95.1%), while the homoatomic counterparts (ZnPor-Ru₂DAC and ZnPor-Cu₂DAC) present the best CO selectivity. In-situ spectroscopic measurements reveal that the heteronuclear Ru-Cu sites easily appear C₁ intermediate coupling. The in-depth analyses confirm that due to the strong gradient orbital coupling of Ru4d-Cu3d resonance, two formed ^*CO intermediates of Ru-Cu heteroatom show a significantly weaker electrostatic repulsion for an asymmetric charge distribution, which result from a side-to-side absorption and narrow dihedral angle distortion. Moreover, the strongly overlapped Ru/Cu-d and CO molecular orbitals split into bonding and antibonding orbitals easily, resulting in decreasing energy splitting levels of C₁ intermediates. These results collectively augment the collision probability of the two ^*CO intermediates on heteronuclear DACs. This work first provides a crucial perspective on the symmetry-forbidden coupling mechanism of C₁ intermediates on diatomic sites.

SiC@FeZnZiF as a Bifunctional Catalyst with Catalytic Activating PMS and Photoreducing Carbon Dioxide

Herein, we encapsulated modified silicon carbide nanoparticles utilizing a metal-organic backbone. E-SiC-FeZnZIF composites were successfully prepared via Fe doping. The catalysis activity of this bifunctional composite material was evaluated by the degradation of tetracycline (THC) and carbamazepine (CBZ) and the reduction of carbon dioxide (CO₂). Nano SiC has received widespread attention in advanced oxidation applications, especially in the catalytic activation of peroxymonosulfate (PMS). However, the inferior activity of SiC has severely restricted its practical use. In this study of dual functional composite materials, nano SiC was firstly etched under aqueous alkali. Then, zeolite imidazolate frame-8 (ZIF-8) was used for immobilization. The filling of the etched nano SiC with FeZnZiF was confirmed by SEM, XRD, FTIR, BET, and XPS analyses. In addition, E-SiC-FeZnZIF exhibited excellent catalytic activation of peroxymonosulfate (PMS) to oxidize water pollutants, which can degrade tetracycline hydrochloride (THC), achieving a removal rate of 72% within 60 min. Moreover, E-SiC-FeZnZIF exhibited a relatively high CO₂ reduction rate with H₂O. The yields of CO and CH₄ were 0.085 and 0.509 μmol g^-1, respectively, after 2 h, which are higher than that of 50 nm of commercial SiC (CO: 0.084 μmol g^-1; CH₄: 0.209 μmol g^-1). This work provides a relatively convenient synthesis path for constructing metal skeleton composites for advanced oxidation and photocatalytic applications. This will have practical significance in protecting water bodies and reducing CO₂, which are vital not only for maintaining the natural ecological balance and negative feedback regulation, but also for creating a new application carrier based on nano silicon carbide.

Engineering a Copper Single-Atom Electron Bridge to Achieve Efficient Photocatalytic CO2 Conversion

Developing highly efficient and stable photocatalysts for the CO₂ reduction reaction (CO₂ RR) remains a great challenge. We designed a Z-Scheme photocatalyst with N-Cu₁ -S single-atom electron bridge (denoted as Cu-SAEB), which was used to mediate the CO₂ RR. The production of CO and O₂ over Cu-SAEB is as high as 236.0 and 120.1 μmol g^-1  h^-1 in the absence of sacrificial agents, respectively, outperforming most previously reported photocatalysts. Notably, the as-designed Cu-SAEB is highly stable throughout 30 reaction cycles, totaling 300 h, owing to the strengthened contact interface of Cu-SAEB, and mediated by the N-Cu₁ -S atomic structure. Experimental and theoretical calculations indicated that the SAEB greatly promoted the Z-scheme interfacial charge-transport process, thus leading to great enhancement of the photocatalytic CO₂ RR of Cu-SAEB. This work represents a promising platform for the development of highly efficient and stable photocatalysts that have potential in CO₂ conversion applications.

Recent advances in spinel ferrite-based magnetic photocatalysts for efficient degradation of organic pollutants

Although spinel ferrite (MFe₂O₄, M = Zn, Ni, Mn, etc.) has been reported as a promising catalyst, its low photocatalytic activity under visible light greatly restricts its practical application. Spinel ferrite-based photocatalytic composites have exhibited improved efficiency for pollutant degradation, due to interface charge carrier mobility and structural modification. Meanwhile, due to its magnetism and stability, spinel ferrite composite can be easily recycled for long-term utilization, showing its high application potential. In this review, the recent advances in the construction and photocatalytic degradation of spinel ferrite composites are discussed, with an emphasis on the relationship between structural property and photocatalytic activity. In addition, to improve their photocatalytic application, the challenges, gaps and future research prospects are proposed.

Non-trivial Contribution of Carbon Hybridization in Carbon-based Substrates to Electrocatalytic Activities in Li-S Batteries

Appling an electrochemical catalyst is an efficient strategy for inhibiting the shuttle effect and enhancing the S utilization of Li-S batteries. Carbon-based materials are the most common conductive agents and catalyst supports used in Li-S batteries, but the correlation between the diversity of hybridizations and sulfur reduction reaction (SRR) catalytic activity remains unclear. Here, by establishing two forms of carbon models, i.e., graphitic carbon (GC) and amorphous carbon (AC), we observe that the nitrogen atom doped in the GC possesses a higher local charge density and a lower Gibbs free energy towards the formation of polysulfides than in the AC. And the GC-based electrode consistently inherits considerably enhanced SRR kinetics and superior cycling stability and rate capability in Li-S batteries. Therefore, the function of carbon in Li-S batteries is not only limited as conductive support but also plays an unignorable contribution to the electrocatalytic activities of SRR.

In situ preparation of a Bi2O2CO3/BiOI with 2D/2D p-n heterojunction photocatalyst for water purification under visible light

Introduction: Semiconductors have similar crystal structures and matched energy levels could form a coupled heterojunction at an interface between them which may allow response to visible light, achieving efficient decomposition of organic compounds. Methods: The Bi₂O₂CO₃/BiOI (BOC/BOI) with 2D/2D p-n heterojunction was prepared by one-pot room-temperature strategy. The prepared materials were tested by various technologies, and the three-dimensional structure, light absorption properties, electrochemical properties and other information were obtained. Photocatalytic tests have also been carried out. Results and discussion: BOC/BOI heterojunction with oxygen vacancies showed much higher photocatalytic activity than pure BOC and BOI. For example, the preferred BOC/BOI-0.5 heterojunction of the degradation rate for Rhodamine B (RhB) is 97.6 % within 2 h, which is 15.8 and 2.2 times faster than that of BiOI and BOC. In addition, the removal rates of tetracycline, ciprofloxacin and bisphenol A by BOC/ BOI-0.5 were 92.4, 80.3 and 68.6%, respectively. The 2D/2D structures of BOC/BOI-0.5 with rich in oxygen vacancies combined p-n junction can effectively inhibit the photoinduced electron-hole pair recombination and increase the production of active free radicals. The O₂- and h+ are the main reactants, giving the composite catalyst potential for degrading a variety of pollutants.

Valorization of ball-milled waste red mud into heterogeneous catalyst as effective peroxymonosulfate activator for tetracycline hydrochloride degradation

Red mud (RM), a kind of iron-rich industrial waste produced in the alumina production process, can be utilized as a potential iron-based material for the removal of refractory organic pollutants from wastewater in advanced oxidation processes (AOPs). In this work, high-iron RM (rich in iron) was activated in a ball mill and applied as an effective activator of peroxymonosulfate (PMS) for tetracycline hydrochloride (TC-HCl) degradation. Compared with that of unmilled RM (69.7%), the TC-HCl decomposition ratios of ball-milled RM (BM-RM) (72.2%-92.0%) were all improved in the presence of PMS. Systematic characterization suggested that ball milling could optimize the physicochemical properties of RM, such as increased surface area, increased oxygen vacancies, enhanced electrical conductivity, and increased exposure of Fe(II) sites, all of which could effectively improve RM for PMS activation to degrade TC-HCl. The quenching experiments and electron paramagnetic resonance technique revealed that ¹O₂ and SO₄·^- contributed dominantly to the TC-HCl degradation. Ultra performance liquid chromatography mass spectrometry analysis combined with density functional theory calculation revealed that the degradation pathways of TC-HCl were driven by hydroxylation, N-demethylation and dehydration in BM-RM/PMS system. Based on quantitative structure-activity relationship prediction using the Toxicity Estimation Software Tool software, the toxicity of almost all intermediates was significantly reduced. An obvious inhibition effect on TC-HCl was occurred in the presence of Cl^-, whereas the presences of NO₃^- and SO₄^2- had little effect. However, HCO₃^- improved TC-HCl removal efficiency. BM-RM had a wide working pH range (pH = 3-11) and showed good stability and reusability in use. Overall, this work not only offers a simple and promising approach to improve the catalytic activity of RM, but also opens new insights into the ball-milled RM as an effective PMS activator for wastewater treatment.

Synergistic Effect in Plasmonic CuAu Alloys as Co-Catalyst on SnIn4S8 for Boosted Solar-Driven CO2 Reduction

The photoreduction of CO2 to chemical fuels represents a promising technology to mitigate the current energy dilemma and global warming problems. Unfortunately, the original photocatalysts suffer from many side reactions and a poor CO2 conversion efficiency. The rational combination of active co-catalyst with pristine photocatalysts for promoting the adsorption and activation of CO2 is of vital importance to tackle this grand challenge. Herein, we rationally designed a SnIn4S8 nanosheet photocatalyst simultaneously equipped with CuAu alloys. The experimental results proved that the CuAu alloy can trap the electrons and enhance the separation and transport efficiency of the photogenerated carrier in the photocatalyst, alleviating the kinetical difficulty of the charge transfer process because of the preferable localized surface plasmon resonance (LSPR). Furthermore, the CuAu alloy works as the synergistic site to increase the CO2 adsorption and activation capacity. The optimized CuAu-SnIn4S8 photocatalyst exhibited a superior performance with CO generation rates of 27.87 μmol g−1 h−1 and CH4 of 7.21 μmol g−1 h−1, which are about 7.6 and 2.5 folds compared with SnIn4S8. This work highlights the critical role of alloy cocatalysts in boosting a CO2 activation and an efficient CO2 reduction, thus contributing to the development of more outstanding photocatalytic systems.

Enhanced Response Speed in 2D Perovskite Oxides-Based Photodetectors for UV Imaging through Surface/Interface Carrier-Transport Modulation

The long-time decay process induced by the persistent photoconductivity (PPC) in metal oxides-based photodetectors (PDs) impedes our demands for high-speed photodetectors. 2D perovskite oxides, emerging candidates for future high-performance PDs, also suffer from the PPC effect. Here, by integrating 2D perovskite Sr₂Nb₃O₁₀ (SNO) nanosheets and nitrogen-doped graphene quantum dots (NGQDs), a unique nanoscale heterojunction is designed to modulate surface/interface carrier transport for enhanced response speed. Notably, the decay time is reduced from hundreds of seconds to a few seconds. The 4%NGQDs-SNO PD exhibits excellent performance with a photocurrent of 0.47 μA, a high on-off ratio of 2.2 × 10⁴, and a fast pulse response speed (τ_decay = 67.3 ms), making it promising for UV imaging. The trap-involved decay process plays a dominant role in determining the decay time, resulting in the PPC effect in SNO PD, and the trap states mainly originate from oxygen vacancies and chemisorbed oxygen molecules. A significantly enhanced photoresponse speed in NGQDs-SNO PDs can be ascribed to the modulated surface/interface trap states and the efficient carrier pathway provided by the nanoscale heterojunction. This work provides an effective way to enhance the response speed in 2D perovskite oxides constrained by PPC via surface/interface engineering, promoting their applications in optoelectronics.