Prediction of Reactive Nitrous Acid Formation in Rare-Earth MOFs via ab initio Molecular Dynamics

Double-walled Al-based MOF with large microporous specific surface area for trace benzene adsorption

Double-walled metal-organic frameworks (MOFs), synthesized using Zn and Co, are potential porous materials for trace benzene adsorption. Aluminum is with low-toxicity and abundance in nature, in comparison with Zn and Co. Therefore, a double-walled Al-based MOF, named as ZJU-520(Al), with large microporous specific surface area of 2235 m2 g-1, pore size distribution in the range of 9.26-12.99 Å and excellent chemical stability, was synthesized. ZJU-520(Al) is consisted by helical chain of AlO6 clusters and 4,6-Di(4-carboxyphenyl)pyrimidine ligands. Trace benzene adsorption of ZJU-520(Al) is up to 5.98 mmol g-1 at 298 K and P/P0 = 0.01. Adsorbed benzene molecules are trapped on two types of sites. One (site I) is near the AlO6 clusters, another (site II) is near the N atom of ligands, using Grand Canonical Monte Carlo simulations. ZJU-520(Al) can effectively separate trace benzene from mixed vapor flow of benzene and cyclohexane, due to the adsorption affinity of benzene higher than that of cyclohexane. Therefore, ZJU-520(Al) is a potential adsorbent for trace benzene adsorption and benzene/cyclohexane separation.

Electrochemically-mediated reactive separation of nitric oxide into nitrate using iron chelate

Valorization of nitric oxide is a promising solution for addressing the environmental and resource issues related to the nitrogen cycle. However, low concentrations of nitric oxide combined with impurities in exhaust streams limit its potential, and it requires extensive energy to produce high-purity nitric oxide. Here, we propose a synergistic reactive separation system that combines iron-chelate selective absorption with an electrochemical reaction to convert nitric oxide to nitrate. Among the iron-based chelates tested, EDTA was found to be the most effective in capturing gas-phase nitric oxide. Direct electrochemical oxidation of Fe-EDTA-NO solution exhibited Faradaic efficiency and a partial current density toward nitrate of 70% and 30.1 mA cm-2 at 2.2 V vs RHE and pH 7, resulting in a 43-fold enhancement of nitrate partial current density and a 2-fold improvement in Faradaic efficiency compared to simple purging without selective absorbent. Nitrate was then selectively recovered from the Fe-EDTA system using simple polarity reversal following electrooxidation with a separation factor of 13 over background sulfate. This study offers a new approach to gas-phase NO remediation and valorization using an electrified means.

Effect of Linker Structure and Functionalization on Secondary Gas Formation in Metal-Organic Frameworks

Rare-earth terephthalic acid (BDC)-based metal-organic frameworks (MOFs) are promising candidate materials for acid gas separation and adsorption from flue gas streams. However, previous simulations have shown that acid gases (H₂O, NO₂, and SO₂) react with the hydroxyl on the BDC linkers to form protonated acid gases as a potential degradation mechanism. Herein, gas-phase computational approaches were used to identify the formation energies of these secondary protonated acid gases across multiple BDC linker molecules. Formation energies for secondary protonated acid gases were evaluated using both density functional theory (DFT) and correlated wave function methods for varying BDC-gas reaction mechanisms. Upon validation of DFT to reproduce wave function calculation results, rotated conformational linkers and chemically functionalized BDC linkers with -OH, -NH₂, and -SH were investigated. The calculations show that the rotational conformation affects the molecule stability. Double-functionalized BDC linkers, where two functional groups are substituted onto BDC, showed varied reaction energies depending on whether the functional groups donate or withdraw electrons from the aromatic system. Based on these results, BDC linker design must balance adsorption performance with degradation via linker dehydrogenation for the design of stable MOFs for acid gas separations.

Dramatic Enhancement of Rare-Earth Metal-Organic Framework Stability Via Metal Cluster Fluorination

Rare-earth polynuclear metal-organic frameworks (RE-MOFs) have demonstrated high durability for caustic acid gas adsorption and separation based on gas adsorption to the metal clusters. The metal clusters in the RE-MOFs traditionally contain RE metals bound by μ₃-OH groups connected via organic linkers. Recent studies have suggested that these hydroxyl groups could be replaced by fluorine atoms during synthesis that includes a fluorine-containing modulator. Here, a combined modeling and experimental study was undertaken to elucidate the role of metal cluster fluorination on the thermodynamic stability, structure, and gas adsorption properties of RE-MOFs. Through systematic density-functional theory calculations, fluorinated clusters were found to be thermodynamically more stable than hydroxylated clusters by up to 8-16 kJ/mol per atom for 100% fluorination. The extent of fluorination in the metal clusters was validated through a ¹⁹F NMR characterization of 2,5-dihydroxyterepthalic acid (Y-DOBDC) MOF synthesized with a fluorine-containing modulator. ¹⁹F magic-angle spinning NMR identified two primary peaks in the isotropic chemical shift (δ_iso) spectra located at -64.2 and -69.6 ppm, matching calculated ¹⁹F NMR δ_iso peaks at -63.0 and -70.0 ppm for fluorinated systems. Calculations also indicate that fluorination of the Y-DOBDC MOF had negligible effects on the acid gas (SO₂, NO₂, H₂O) binding energies, which decreased by only ∼4 kJ/mol for the 100% fluorinated structure relative to the hydroxylated structure. Additionally, fluorination did not change the relative gas binding strengths (SO₂ > H₂O > NO₂). Therefore, for the first time the presence of fluorine in the metal clusters was found to significantly stabilize RE-MOFs without changing their acid-gas adsorption properties.

Molecular Dynamics Study of the Photodegradation of Polymeric Chains

The development of reusable polymeric materials inspires an attempt to combine renewable biomass with upcycling to form a biorenewable closed system. It has been reported that 2,5-furandicarboxylic acid (FDCA) can be recovered for recycling when incorporated as monomers into photodegradable polymeric systems. Here, we conduct density functional theory (DFT) studies with periodic boundary conditions on microscopic structures involved in the photodegradation of polymeric chains incorporating FDCA and 2-nitro-1,3-benzenedimethanol. The photodegradation process of polymeric chains is studied using time-dependent excited-state molecular dynamics (TDESMD) in vacuum and aqueous environments. Changes in the photophysical properties for reaction intermediates are characterized by ground-state observables. The distribution of reaction intermediates and products is obtained from TDESMD trajectories using cheminformatics techniques. Results show that a higher degree of polymeric chain degradation is achieved in the vacuum environment. Additionally, one finds that the FDCA molecule is recoverable in the aqueous environment, in qualitative agreement with experimental findings.

Design Elements for Enhanced Hydrogen Isotope Separations in Barely Porous Organic Cages

Barely porous organic cages (POCs) successfully separate hydrogen isotopes (H₂/D₂) at temperatures below 100 K. Identifying the mechanisms that control the separation process is key to the design of next-generation hydrogen separation materials. Here, ab initio molecular dynamics (AIMD) simulations are used to elucidate the mechanisms that control D₂ and H₂ separation in barely POCs with varying functionalization. The temperature and pore size dependence were identified, including the selective capture of D₂ in three different CC3 structures (RCC3, CC3-S, and 6ET-RCC3). The temperature versus capture trend was reversed for the 6ET-RCC3 structure, identifying that the D₂ and H₂ escape mechanisms are unique in highly functionalized systems. Analysis of calculated isotope velocities identified effective pore sizes that extend beyond the pore opening distances, resulting in increased capture in minimally functionalized CC3-S and RCC3. In a highly functionalized POC, 6ET-RCC3, higher velocities of the H isotopes were calculated moving through the restricted pore compared to the rest of the system, identifying a unique molecular behavior in the barely nanoporous pore openings. By using AIMD, mechanisms of H₂ and D₂ separation were identified, allowing for the targeted design of future novel materials for hydrogen isotope separation.

Kinetic separation of C2H6/C2H4 in a cage-interconnected metal–organic framework: an interaction-screening mechanism

Multi-scale simulations were carried out on a cage-interconnected metal-organic framework (JNU-2), revealing a rarely observed interaction-screening mechanism that corroborates its large C2H6/C2H4 adsorption selectivity.

Prediction of Reactive Nitrous Acid Formation in Rare-Earth MOFs via ab initio Molecular Dynamics

Reactive gas formation in pores of metal-organic frameworks (MOFs) is a known mechanism of framework destruction; understanding those mechanisms for future durability design is key to next generation adsorbents. Herein, an extensive set of ab initio molecular dynamics (AIMD) simulations are used for the first time to predict competitive adsorption of mixed acid gases (NO2 and H2 O) and the in-pore reaction mechanisms for a series of rare earth (RE)-DOBDC MOFs. Spontaneous formation of nitrous acid (HONO) is identified as a result of deprotonation of the MOF organic linker, DOBDC. The unique DOBDC coordination to the metal clusters allows for proton transfer from the linker to the NO2 without the presence of H2 O and may be a factor in DOBDC MOF durability. This is a previously unreported mechanisms of HONO formation in MOFs. With the presented methodology, prediction of future gas interactions in new nanoporous materials can be achieved.