Localized Water-In-Salt Electrolyte for Aqueous Lithium-Ion Batteries

Advances of LiCoO2 in Cathode of Aqueous Lithium-Ion Batteries

Aqueous lithium-ion batteries offer promising advantages such as low cost, enhanced safety, high rate capability, and the ability to deliver considerable capacity at 1.8 V, making them ideal candidates for large-scale reserve power sources for renewable energy. However, the practical application of aqueous lithium-ion batteries has been hindered by the poor cycle stability of layered cathode materials, including LiCoO2, in neutral aqueous electrolytes. This review examines the working principles, material limitations, and research progress of aqueous lithium-ion batteries. The types and characteristics of materials used in the cathode of aqueous lithium-ion batteries are summarized, with a primary focus on the attenuation mechanisms of LiCoO2 when used as the cathode material in aqueous electrolytes. Furthermore, this review explores the advancements in utilizing LiCoO2 in the cathode of aqueous lithium-ion batteries, as well as the combination with machine learning. By addressing these critical aspects, this review aims to provide a comprehensive understanding of aqueous lithium-ion batteries and shed light on future development and application prospects.

Steric-hindrance Effect Tuned Ion Solvation Enabling High Performance Aqueous Zinc Ion Batteries

Despite many additives have been reported for aqueous zinc ion batteries, steric-hindrance effect of additives and its correlation with Zn2+ solvation structure have been rarely reported. Herein, large-sized sucrose biomolecule is selected as a paradigm additive, and steric-hindrance electrolytes (STEs) are developed to investigate the steric-hindrance effect for solvation structure regulation. Sucrose molecules do not participate in Zn2+ solvation shell, but significantly homogenize the distribution of solvated Zn2+ and enlarge Zn2+ solvation shell with weakened Zn2+-H2O interaction due to the steric-hindrance effect. More importantly, STEs afford the water-shielding electric double layer and in situ construct the organic and inorganic hybrid solid electrolyte interface, which effectively boost Zn anode reversibility. Remarkably, Zn//NVO battery presents high capacity of 3.9 mAh ⋅ cm-2 with long cycling stability for over 650 cycles at lean electrolyte of 4.5 μL ⋅ mg-1 and low N/P ratio of 1.5, and the stable operation at wide temperature (-20 °C~+40 °C).

Designing Nonflammable Liquid Electrolytes for Safe Li-Ion Batteries

Li-ion batteries are essential technologies for electronic products in the daily life. However, serious fire safety concerns that are closely associated with the flammable liquid electrolyte remains a key challenge. Tremendous effort has been devoted to designing nonflammable liquid electrolytes. It is critical to gain comprehensive insights into nonflammability design and inspire more efficient approaches for building safer Li-ion batteries. This review presents current mechanistic understanding of safety issues and discusses state-of-the-art nonflammable liquid electrolytes design for Li-ion batteries based on molecule, solvation, and battery compatibility level. Various safety test methods are discussed for reliable safety risk evaluation. Finally, the challenges and perspectives of the nonflammability design for Li-ion electrolytes are summarized.

Electrolyte and Interphase Engineering of Aqueous Batteries Beyond "Water-in-Salt" Strategy

Aqueous batteries are promising alternatives to non-aqueous lithium-ion batteries due to their safety, environmental impact, and cost-effectiveness. However, their energy density is limited by the narrow electrochemical stability window (ESW) of water. The "Water-in-salts" (WIS) strategy is an effective method to broaden the ESW by reducing the "free water" in the electrolyte, but the drawbacks (high cost, high viscosity, poor low-temperature performance, etc.) also compromise these inherent superiorities. In this review, electrolyte and interphase engineering of aqueous batteries to overcome the drawbacks of the WIS strategy are summarized, including the developments of electrolytes, electrode-electrolyte interphases, and electrodes. First, the main challenges of aqueous batteries and the problems of the WIS strategy are comprehensively introduced. Second, the electrochemical functions of various electrolyte components (e.g., additives and solvents) are summarized and compared. Gel electrolytes are also investigated as a special form of electrolyte. Third, the formation and modification of the electrolyte-induced interphase on the electrode are discussed. Specifically, the modification and contribution of electrode materials toward improving the WIS strategy are also introduced. Finally, the challenges of aqueous batteries and the prospects of electrolyte and interphase engineering beyond the WIS strategy are outlined for the practical applications of aqueous batteries.

Unlocking the Effect of Chain Length and Terminal Group on Ethylene Glycol Ether Family Toward Advanced Aqueous Electrolytes

Constructing high-performance hybrid electrolyte is important to advanced aqueous electrochemical energy storage devices. However, due to the lack of in-depth understanding of how the molecule structures of cosolvent additives influence the properties of electrolytes significantly impeded the development of hybrid electrolytes. Herein, a series of hybrid electrolytes are prepared by using ethylene glycol ether with different chain lengths and terminal groups as additives. The optimized 2 m LiTFSI-90%DDm hybrid electrolyte prepared from diethylene glycol dimethyl ether (DDm) molecule showcases excellent comprehensive performance and significantly enhances the operating voltage of supercapacitors (SCs) to 2.5 V by suppressing the activity of water. Moreover, the SC with 2 m LiTFSI-90%DDm hybrid electrolyte supplies a long-term cycling life of 50 000 cycles at 1 A g-1 with 92.3% capacitance retention as well as excellent low temperature (-40 ºC) cycling performance (10 000 times at 0.2 A g-1). Universally, Zn//polyaniline full cell with 2 m Zn(OTf)2-90%DDm electrolyte manifests outstanding cycling performance in terms of 77.9% capacity retention after 2,000 cycles and a dendrite-free Zn anode. This work inspires new thinking of developing advanced hybrid electrolytes by cosolvent molecule design toward high-performance energy storage devices.

An All-Climate Nonaqueous Hydrogen Gas-Proton Battery

Rechargeable hydrogen gas batteries, driven by hydrogen evolution and oxidation reactions (HER/HOR), are emerging grid-scale energy storage technologies owing to their low cost and superb cycle life. However, compared with aqueous electrolytes, the HER/HOR activities in nonaqueous electrolytes have rarely been studied. Here, for the first time, we develop a nonaqueous proton electrolyte (NAPE) for a high-performance hydrogen gas-proton battery for all-climate energy storage applications. The advanced nonaqueous hydrogen gas-proton battery (NAHPB) assembled with a representative V2(PO4)3 cathode and H2 anode in a NAPE exhibits a high discharge capacity of 165 mAh g-1 at 1 C at room temperature. It also efficiently operates under all-climate conditions (from -30 to +70 °C) with an excellent electrochemical performance. Our findings offer a new direction for designing nonaqueous proton batteries in a wide temperature range.

Peptide Gel Electrolytes for Stabilized Zn Metal Anodes

The rechargeable aqueous Zn ion battery (AZIB) is considered a promising candidate for future energy storage applications due to its intrinsic safety features and low cost. However, Zn dendrites and side reactions (e.g., corrosion, hydrogen evolution reaction, and inactive side product (Zn hydroxide sulfate) formation) at the Zn metal anode have been serious obstacles to realizing a satisfactory AZIB performance. The application of gel electrolytes is a common strategy for suppressing these problems, but the normally used highly cross-linked polymer matrix (e.g., polyacrylamide (PAM)) brings additional difficulties for battery assembly and recycling. Herein, we have developed a gel electrolyte for Zn metal anode stabilization, where a peptide matrix, a highly biocompatible material, is used for gel construction. Various experiments and simulations elucidate the sulfate anion-assisted self-assembly gel formation and its effect in stabilizing Zn metal anodes. Unlike polymer gel electrolytes, the peptide gel electrolyte can reversibly transform between gel and liquid states, thus facilitating the gel-involved battery assembly and recycling. Furthermore, the peptide gel electrolyte provides fast Zn ion diffusion (comparable to conventional liquid electrolyte) while suppressing side reactions and dendrite growth, thus achieving highly stable Zn metal anodes as validated in various cell configurations. We believe that our concept of gel electrolyte design will inspire more future directions for Zn metal anode protection based on gel electrolyte design.

Comprehensive Understandings of Hydrogen Bond Chemistry in Aqueous Batteries

Aqueous batteries are emerging as highly promising contenders for large-scale grid energy storage because of uncomplicated assembly, exceptional safety, and cost-effectiveness. The unique aqueous electrolyte with a rich hydrogen bond (HB) environment inevitably has a significant impact on the electrode materials and electrochemical processes. While numerous reviews have focused on the materials design and assembly of aqueous batteries, the utilization of HB chemistry is overlooked. Herein, instead of merely compiling recent advancements, this review presents a comprehensive summary and analysis of the profound implication exerted by HB on all components of the aqueous batteries. Intricate links between the novel HB chemistry and various aqueous batteries are ingeniously constructed within the critical aspects, such as self-discharge, structural stability of electrode materials, pulverization, solvation structures, charge carrier diffusion, corrosion reactions, pH sensitivity, water splitting, polysulfides shuttle, and H2 S evolution. By adopting a vantage point that encompasses material design, binder and separator functionalization, electrolyte regulation, and HB optimization, a critical examination of the key factors that impede electrochemical performance in diverse aqueous batteries is conducted. Finally, insights are rendered properly based on HB chemistry, with the aim of propelling the advancement of state-of-the-art aqueous batteries.

Chaotropic Electrolyte Enabling Wide-Temperature Metal-Free Battery

Metal-free aqueous batteries are promising candidates for grid-scale energy storage owing to their inherent safety, low cost, and cost effectiveness. The battery chemistry based on fast NH4+ diffusion kinetics avoids unfavorable generation of inactive metallic byproducts. However, their practical applications have been impeded by electrolyte instability and the intrinsic drawbacks of current electrodes. Herein, we propose an aqueous ammonium-iodine battery by using a chaotropic electrolyte, 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) anode, and iodine composite (I2@CC) cathode. Experimental investigations and theoretical calculations reveal that the chaotropic electrolyte not only enhances electrolyte stability through modulating the H-bond structure but also facilitates the formation of a hydrophobic cationic sieve (HCS) on the anode, which ensures the electrolyte/electrode stability and high reversibility of the anode. Additionally, the Cl--containing electrolyte can support the consecutive I+/I0 reaction on the cathode by forming [IClx]1-x interhalogen. The as-assembled aqueous ammonium-iodine batteries (AIBs) based on NH4+ accommodation at the anode and I+/I0 redox reaction at the cathode can deliver superior electrochemical performance at room temperature and low temperature (-20 °C). This study provides a strategic insight into developing metal-free aqueous batteries with electrolyte modulation.

A Comprehensive Evaluation of Battery Technologies for High-Energy Aqueous Batteries

Aqueous batteries have garnered significant attention in recent years as a viable alternative to lithium-ion batteries for energy storage, owing to their inherent safety, cost-effectiveness, and environmental sustainability. This study offers a comprehensive review of recent advancements, persistent challenges, and the prospects of aqueous batteries, with a primary focus on energy density compensation of various battery engineering technologies. Additionally, cutting-edge high-energy aqueous battery designs are emphasized as a reference for future endeavors in the pursuit of high-energy storage solutions. Finally, a dual-compatibility battery configuration perspective aimed at concurrently optimizing cycle stability, redox potential, capacity utilization for both anode and cathode materials, as well as the selection of potential electrode candidates, is proposed with the ultimate goal of achieving cell-level energy densities exceeding 400 Wh kg-1 .

A Mitochondrion-Inspired Magnesium-Oxygen Biobattery with High Energy Density In Vivo

Implantable batteries are urgently needed as a power source to meet the demands of the next generation of biomedical electronic devices. However, existing implantable batteries suffer from unsatisfactory energy density, hindering the miniaturization of these devices. Here, a mitochondrion-inspired magnesium-oxygen biobattery that achieves both high energy density and biocompatibility in vivo is reported. The resulting biobattery exhibits a recorded energy density of 2517 Wh L-1 /1491 Wh kg-1 based on the total volume/mass of the device in vivo, which is ≈2.5 times higher than the current state-of-the-art, and can adapt to different environments for stable discharges. The volume of the magnesium-oxygen biobattery can be as thin as 0.015 mm3 and can be scaled up to 400 times larger without reducing the energy density. Additionally, it shows a stable biobattery/tissue interface, significantly reducing foreign body reactions. This work presents an effective strategy for the development of high-performance implantable batteries.

Fine-Tuning Electrolyte Concentration and Metal-Organic Framework Surface toward Actuating Fast Zn2+ Dehydration for Aqueous Zn-Ion Batteries

Functional porous coating on zinc electrode is emerging as a powerful ionic sieve to suppress dendrite growth and side reactions, thereby improving highly reversible aqueous zinc ion batteries. However, the ultrafast charge rate is limited by the substantial cation transmission strongly associated with dehydration efficiency. Here, we unveil the entire dynamic process of solvated Zn2+ ions' continuous dehydration from electrolyte across the MOF-electrolyte interface into channels with the aid of molecular simulations, taking zeolitic imidazolate framework ZIF-7 as proof-of-concept. The moderate concentration of 2 M ZnSO4 electrolyte being advantageous over other concentrations possesses the homogeneous water-mediated ion pairing distribution, resulting in the lowest dehydration energy, which elucidates the molecular mechanism underlying such concentration adopted by numerous experimental studies. Furthermore, we show that modifying linkers on the ZIF-7 surface with hydrophilic groups such as -OH or -NH2 can weaken the solvation shell of Zn2+ ions to lower the dehydration free energy by approximately 1 eV, and may improve the electrical conductivity of MOF. These results shed light on the ions delivery mechanism and pave way to achieve long-term stable zinc anodes at high capacities through atomic-scale modification of functional porous materials.

Insights into the solvation chemistry in liquid electrolytes for lithium-based rechargeable batteries

Lithium-based rechargeable batteries have dominated the energy storage field and attracted considerable research interest due to their excellent electrochemical performance. As indispensable and ubiquitous components, electrolytes play a pivotal role in not only transporting lithium ions, but also expanding the electrochemical stable potential window, suppressing the side reactions, and manipulating the redox mechanism, all of which are closely associated with the behavior of solvation chemistry in electrolytes. Thus, comprehensively understanding the solvation chemistry in electrolytes is of significant importance. Here we critically reviewed the development of electrolytes in various lithium-based rechargeable batteries including lithium-metal batteries (LMBs), nonaqueous lithium-ion batteries (LIBs), lithium-sulfur batteries (LSBs), lithium-oxygen batteries (LOBs), and aqueous lithium-ion batteries (ALIBs), and emphasized the effects of interactions between cations, anions, and solvents on solvation chemistry, and functions of solvation chemistry in different types of electrolytes (strong solvating electrolytes, moderate solvating electrolytes, and weak solvating electrolytes) on the electrochemical performance and redox mechanism in the abovementioned rechargeable batteries. Specifically, the significant effects of solvation chemistry on the stability of electrode-electrolyte interphases, suppression of lithium dendrites in LMBs, inhibition of the co-intercalation of solvents in LIBs, improvement of anodic stability at high cut-off voltages in LMBs, LIBs and ALIBs, regulation of redox pathways in LSBs and LOBs, and inhibition of hydrogen/oxygen evolution reactions in LOBs are thoroughly summarized. Finally, the review concludes with a prospective outlook, where practical issues of electrolytes, advanced in situ/operando techniques to illustrate the mechanism of solvation chemistry, and advanced theoretical calculation and simulation techniques such as "material knowledge informed machine learning" and "artificial intelligence (AI) + big data" driven strategies for high-performance electrolytes have been proposed.

Operando characterization and regulation of metal dissolution and redeposition dynamics near battery electrode surface

Mn dissolution has been a long-standing, ubiquitous issue that negatively impacts the performance of Mn-based battery materials. Mn dissolution involves complex chemical and structural transformations at the electrode-electrolyte interface. The continuously evolving electrode-electrolyte interface has posed great challenges for characterizing the dynamic interfacial process and quantitatively establishing the correlation with battery performance. In this study, we visualize and quantify the temporally and spatially resolved Mn dissolution/redeposition (D/R) dynamics of electrochemically operating Mn-containing cathodes. The particle-level and electrode-level analyses reveal that the D/R dynamics is associated with distinct interfacial degradation mechanisms at different states of charge. Our results statistically differentiate the contributions of surface reconstruction and Jahn-Teller distortion to the Mn dissolution at different operating voltages. Introducing sulfonated polymers (Nafion) into composite electrodes can modulate the D/R dynamics by trapping the dissolved Mn species and rapidly establishing local Mn D/R equilibrium. This work represents an inaugural effort to pinpoint the chemical and structural transformations responsible for Mn dissolution via an operando synchrotron study and develops an effective method to regulate Mn interfacial dynamics for improving battery performance.

Ultrafast Nucleation Reverses Dissolution of Transition Metal Ions for Robust Aqueous Batteries

The dissolution of transition metal ions causes the notorious peeling of active substances and attenuates electrochemical capacity. Frustrated by the ceaseless task of pushing a boulder up a mountain, Sisyphus of the Greek myth yearned for a treasure to be unearthed that could bolster his efforts. Inspirationally, by using ferricyanide ions (Fe(CN)₆^3-) in an electrolyte as a driving force and taking advantage of the fast nucleation rate of copper hexacyanoferrate (CuHCF), we successfully reversed the dissolution of Fe and Cu ions that typically occurs during cycling. The capacity retention increased from 5.7% to 99.4% at 0.5 A g^-1 after 10,000 cycles, and extreme stability of 99.8% at 1 A g^-1 after 40,000 cycles was achieved. Fe(CN)₆^3- enables atom-by-atom substitution during the electrochemical process, enhancing conductivity and reducing volume change. Moreover, we demonstrate that this approach is applicable to various aqueous batteries (i.e., NH₄⁺, Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, and Al³⁺).

Microscopic-Level Insights into Solvation Chemistry for Nonsolvating Diluents Enabling High-Voltage/Rate Aqueous Supercapacitors

Localized "water-in-salt" (LWIS) electrolytes are promising candidates for the next generation of high-voltage aqueous electrolytes with low viscosity/salt beyond high-salt electrolytes. An effective yet high-function diluent mainly determines the properties of LWIS electrolytes, being a key issue. Herein, the donor number of solvents is identified to serve as a descriptor of interaction intensity between solvents and salts to screen the organic diluents having few impacts on the solvation microenvironment and intrinsic properties of the original high-salt electrolyte, further leading to the construction of a novel low-viscosity electrolyte with a low dosage of the LiNO₃ salt and well-kept intrinsic Li⁺-NO₃^--H₂O clusters. Nonsolvating diluents, especially acetonitrile (AN) that has never been reported previously, are presented with the capability of constructing a LWIS electrolyte with nonflammability, electrode-philic features, lower viscosity, decreased salt dosage, and a greatly enhanced ion diffusion coefficient by about 280 times. This strongly relies on a huge difference of about 5000 times in coordination and solubility between AN and H₂O toward LiNO₃ (0.05 vs 25 mol kg_solvent^-1) and the moderate interaction between AN and H₂O. Multi-spectroscopic techniques and molecular dynamics simulations uncover the solvation chemistry at the microscopic level and the interplay among cations, anions, and H₂O without/with AN. The identified unique diluting and nonsolvating effects of AN reveal well-maintained cation-anion-H₂O clusters and enhanced intermolecular hydrogen bonding between AN and H₂O, further reinforcing the H₂O stability and expanding the voltage window up to 3.28 V. This is a breakthrough that is far beyond high-viscosity/salt electrolytes for high-voltage and high-rate aqueous supercapacitors.

"Water-in-Deep Eutectic Solvent" Gel Electrolytes Synergistically Controlled by Solvation Regulation and Gelation Strategies for Flexible Electronic Devices

Recent developments in flexible electronics have heightened the need for electrolytes with high safety, ionic conductivity, and electrochemical stability. However, neither conventional organic electrolytes nor aqueous electrolytes can meet the above requirements simultaneously. Herein, a novel "water-in-deep eutectic solvent" gel (WIDG) electrolyte synergistically controlled by the solvation regulation and gelation strategies is reported. The water molecules introduced into deep eutectic solvent (DES) participate in the solvation structure regulation of Li⁺, thus endowing the WIDG electrolyte with high safety, thermal stability, and outstanding electrochemical performance, including high ionic conductivity (∼1.23 mS cm^-1) and a wide electrochemical window (∼5.4 V). Besides, the polymer in the gel interacts with DES and H₂O, further optimizing the electrolyte with excellent mechanical strength and higher operating voltage. Benefiting from these advantages, the lithium-ion capacitor constructed by WIDG electrolyte presents a high areal capacitance of 246 mF cm^-2 with an energy density of 87.3 μWh cm^-2. The use of the gel enhances the electrode structure stability, resulting in desirable cycling stability (>90% capacity retention after 1400 cycles). Moreover, the WIDG-assembled sensor exhibits high sensitivity and rapid real-time detection of motion. This work will provide guidelines for designing high-safety and high-operating-voltage electrolytes for flexible electronics.

Electrolyte design principles for developing quasi-solid-state rechargeable halide-ion batteries

Rechargeable halide-ion batteries (HIBs) are good candidates for large-scale due to their appealing energy density, low cost, and dendrite-free features. However, state-of-the-art electrolytes limit the HIBs' performance and cycle life. Here, via experimental measurements and modelling approach, we demonstrate that the dissolutions in the electrolyte of transition metal and elemental halogen from the positive electrode and discharge products from the negative electrode cause the HIBs failure. To circumvent these issues, we propose the combination of fluorinated low-polarity solvents with a gelation treatment to prevent dissolutions at the interphase, thus, improving the HIBs' performance. Using this approach, we develop a quasi-solid-state Cl-ion-conducting gel polymer electrolyte. This electrolyte is tested in a single-layer pouch cell configuration with an iron oxychloride-based positive electrode and a lithium metal negative electrode at 25 °C and 125 mA g^-1. The pouch delivers an initial discharge capacity of 210 mAh g^-1 and a discharge capacity retention of almost 80% after 100 cycles. We also report assembly and testing of fluoride-ion and bromide-ion cells using quasi-solid-state halide-ion-conducting gel polymer electrolyte.

Hydrogen-Bond Restructuring of Water-in-Salt Electrolyte Confined in Ti3C2Tx MXene Monitored by Operando Infrared Spectroscopy

Highly concentrated water-in-salt aqueous electrolytes exhibit a wider potential window compared to conventional, dilute aqueous electrolytes. Coupled with MXenes, a family of two-dimensional transition metal carbides and nitrides with impressive charge storage capabilities, water-in-salt electrolytes present a potential candidate to replace flammable and toxic organic solvents in electrochemical energy storage devices. A new charge storage mechanism was recently discovered during electrochemical cycling of Ti₃C₂T_x MXene electrodes in lithium-based water-in-salt electrolytes, attributed to intercalation and deintercalation of solvated Li⁺ ions at anodic potentials. Nevertheless, direct evidence of the state of Li⁺ solvation during cycling is still missing. Here, we investigate the hydrogen bonding of water intercalated between MXene layers during electrochemical cycling in a water-in-salt electrolyte with operando infrared spectroscopy. The hydrogen-bonding state of the confined water was found to change significantly as a function of potential and the concentration of Li⁺ ions in the interlayer space. This study provides fundamentally new insights into the electrolyte structural changes while intercalating Li⁺ in the MXene interlayer space.

Comprehensive H2 O Molecules Regulation via Deep Eutectic Solvents for Ultra-Stable Zinc Metal Anode

The corrosion, parasitic reactions, and aggravated dendrite growth severely restrict development of aqueous Zn metal batteries. Here, we report a novel strategy to break the hydrogen bond network between water molecules and construct the Zn(TFSI)₂ -sulfolane-H₂ O deep eutectic solvents. This strategy cuts off the transfer of protons/hydroxides and inhibits the activity of H₂ O, as reflected in a much lower freezing point (<-80 °C), a significantly larger electrochemical stable window (>3 V), and suppressed evaporative water from electrolytes. Stable Zn plating/stripping for over 9600 h was obtained. Based on experimental characterizations and theoretical simulations, it has been proved that sulfolane can effectively regulate solvation shell and simultaneously build the multifunctional Zn-electrolyte interface. Moreover, the multi-layer homemade modular cell and 1.32 Ah pouch cell further confirm its prospect for practical application.

Research Progresses of Liquid Electrolytes in Lithium-Ion Batteries

In recent years, the rapid development of modern society is calling for advanced energy storage to meet the growing demands of energy supply and generation. As one of the most promising energy storage systems, secondary batteries are attracting much attention. The electrolyte is an important part of the secondary battery, and its composition is closely related to the electrochemical performance of the secondary batteries. Lithium-ion battery electrolyte is mainly composed of solvents, additives, and lithium salts, which are prepared according to specific proportions under certain conditions and according to the needs of characteristics. This review analyzes the advantages and current problems of the liquid electrolytes in lithium-ion batteries (LIBs) from the mechanism of action and failure mechanism, summarizes the research progress of solvents, lithium salts, and additives, analyzes the future trends and requirements of lithium-ion battery electrolytes, and points out the emerging opportunities in advanced lithium-ion battery electrolytes development.

A High-Performance Quasi-Solid-State Aqueous Zinc-Dual Halogen Battery

Aqueous zinc-based batteries are promising candidates for the grid-scale energy storage owing to their nonflammability, ecofriendliness, and low cost. Nevertheless, their practical applications are hindered by the relatively low capacity and energy density. Herein, we develop a quasi-solid-state aqueous zinc-dual halogen battery composed of freestanding carbon cloth-iodine cathode and in situ prepared concentrated aqueous gel electrolyte. The freestanding composite cathode and aqueous gel electrolyte can afford iodine source and bromide ions, respectively, thus activating the I^-/I⁰/I⁺ reaction by forming [IBr₂]^- interhalogen. Furthermore, the conversion reaction of Br^-/Br⁰ in [IBr₂]^- interhalogen is stimulated due to the catalytic effect of iodine. Therefore, this rationally designed aqueous dual halogen conversion chemistry enables three successive redox reactions (i.e., I^-/I⁰, I⁰/I⁺, and Br^-/Br⁰). Additionally, the LiNO₃ additive and acrylamide (AM)-based polymer matrix not only stabilizes the anode/electrolyte interface but also restrains the side reactions and dissolution/diffusion of active species. Consequently, the as-assembled aqueous zinc-dual halogen battery exhibits high areal capacity and energy density.

Real-Space Charge Density Profiling of Electrode-Electrolyte Interfaces with Angstrom Depth Resolution

The accumulation and depletion of charges at electrode-electrolyte interfaces is crucial for all types of electrochemical processes. However, the spatial profile of such interfacial charges remains largely elusive. Here we develop charge profiling three-dimensional (3D) atomic force microscopy (CP-3D-AFM) to experimentally quantify the real-space charge distribution of the electrode surface and electric double layers (EDLs) with angstrom depth resolution. We first measure the 3D force maps at different electrode potentials using our recently developed electrochemical 3D-AFM. Through statistical analysis, peak deconvolution, and electrostatic calculations, we derive the depth profile of the local charge density. We perform such charge profiling for two types of emergent electrolytes, ionic liquids, and highly concentrated aqueous solutions, observe pronounced sub-nanometer charge variations, and find the integrated charge densities to agree with those derived from macroscopic electrochemical measurements.

Viscoelastic Properties of Water-Absorbed Poly(methyl methacrylate) Doped with Lithium Salts with Various Anions

We investigated the effects of water absorption on the dynamic mechanical properties of poly(methyl methacrylate) doped with various generic lithium salts, such as lithium perchlorate trihydrate (LiClO₄), lithium trifluoromethanesulfonate (LiCF₃SO₃), lithium nonafluorobutanesulfonate (LiC₄F₉SO₃), and lithium bis(trifluoromethanesulfonyl)imide (LiN(CF₃SO₂)). The rates of weight change during water absorption of lithium salt-doped samples were higher in the following order: LiClO₄, LiCF₃SO₃, LiC₄F₉SO₃, and LiN(CF₃SO₂). Interestingly, the aforementioned order was the same as the order of the terminal relaxation times in the flow region of the viscoelastic measurement in the melting-state. This implies that the water absorption of the salt-doped PMMA occurs due to the factors that affect the pinning of the PMMA molecular chains in the places.

Dynamic Biomolecular "Mask" Stabilizes Zn Anode

Zn anode is confronted with serious Zn dendrite growth and water-induced parasitic reactions, which severely hinders the rapid development and practical application of aqueous zinc metal batteries (AZMBs). Herein, inspired by sodium hyaluronate (SH) biomolecules in living organisms featured with the functions of water retention, ion-transport regulation, and film-formation, the SH working as a dynamic and self-adaptive "mask" is proposed to stabilize Zn anode. Benefiting from the abundant functional groups with high hydrophilicity and zincophilicity, SH molecule can constrain active water molecules on the Zn-electrolyte interface and participate in Zn²⁺ solvation structure to suppress parasitic reactions. Furthermore, the dynamical adsorption of SH with high-density negative charge on the Zn surface could serve as Zn²⁺ reservoirs to guide uniform Zn deposition. Consequently, stable Zn plating and an ultrahigh cumulative plating capacity (CPC) of 4.8 Ah cm^-2 are achieved even at 20 mA cm^-2 (20 mAh cm^-2 ) in a Zn||Zn symmetric battery, reaching a record level in AZMBs. In addition, the Zn||β-MnO₂ full battery exhibits a substantially improved cycle stability. This work presents a route to realize a highly reversible and stable Zn metal anode by learning from nature.

Electrolytes with Micelle-Assisted Formation of Directional Ion Transport Channels for Aqueous Rechargeable Batteries with Impressive Performance

Low-cost and ecofriendly electrolytes with suppressed water reactivity and raised ionic conductivity are desirable for aqueous rechargeable batteries because it is a dilemma to decrease the water reactivity and increase the ionic conductivity at the same time. In this paper, Li₂SO₄–Na₂SO₄–sodium dodecyl sulfate (LN-SDS)-based aqueous electrolytes are designed, where: (i) Na⁺ ions dissociated from SDS increase the charge carrier concentration, (ii) DS⁻/SO₄²⁻ anions and Li⁺/Na⁺ cations are capable of trapping water molecules through hydrogen bonding and/or hydration, resulting in a lowered melting point, (iii) Li⁺ ions reduce the Krafft temperature of LN-SDS, (iv) Na⁺ and SO₄²⁻ ions increase the low-temperature electrolyte ionic conductivity, and (v) SDS micelle clusters are orderly aggregated to form directional ion transport channels, enabling the formation of quasi-continuous ion flows without (r.t.) and with (≤0 °C) applying voltage. The screened LN-SDS is featured with suppressed water reactivity and high ionic conductivity at temperatures ranging from room temperature to −15 °C. Additionally, NaTi₂(PO₄)₃‖LiMn₂O₄ batteries operating with LN-SDS manifest impressive electrochemical performance at both room temperature and −15 °C, especially the cycling stability and low-temperature performance.

Tuning the Electrolyte Solvation Structure via a Nonaqueous Co-Solvent to Enable High-Voltage Aqueous Lithium-Ion Batteries

"Water-in-salt" electrolytes have significantly expanded the electrochemical stability window of the aqueous electrolytes from 1.23 to 3 V, making highly safe 3.0 V aqueous Li-ion batteries possible. However, the awkward cathodic limit located at 1.9 V (versus Li⁺/Li) and the high cost of the expensive salts hinder the practical applications. In this work, an ideal "bisolvent-in-salt" electrolyte is reported to tune the electrolyte solvation structure via introducing sulfolane as the co-solvent, which significantly enhances the cathodic limit of water to 1.0 V (versus Li⁺/Li) at a significantly reduced salt concentration of 5.7 mol kg^-1. Due to the competitive coordination of sulfolane, water molecules that should be in the primary solvation sheath of Li⁺ are partly substituted by the electrochemically stable sulfolane, significantly decreasing the hydrogen evolution. Meanwhile, the unique electrolyte structures enable the formation and stabilization of a robust solid electrolyte interphase. As a result, a 2.4 V LiMn₂O₄/Li₄Ti₅O₁₂ full cell with a high energy density of 128 Wh kg^-1 is realized. The hybrid water/sulfolane electrolytes provide a brand new strategy for designing aqueous electrolytes with an expanded electrochemical stability window at a low salt concentration.

All-Climate High-Voltage Commercial Lithium-Ion Batteries Based on Propylene Carbonate Electrolytes

Propylene carbonate (PC)-based electrolytes have many attractive advantages over the commercially used ethylene carbonate (EC)-based electrolytes like a wider operating temperature and higher oxidation stability. Therefore, PC-based electrolytes become the potential candidate for lithium-ion batteries with higher energy density, longer lifespan, and better low- and high-temperature performance. In spite of the superiority, PC is incompatible with the graphite anode because PC fails to passivate the graphite anode, leading to severe decomposition and gas evolution, which seriously restrict the development of the PC-based electrolytes. Nevertheless, it is recently found that the usage of diethyl carbonate (DEC) as a cosolvent will greatly improve the anodic tolerance of PC to realize the reversible lithiation/delithiation of the graphite anode in the PC-based electrolyte. It is because DEC induces anions into the solvation shell of Li⁺ to form an anion-induced ion-solvent-coordinated (AI-ISC) structure with higher reduction stability. In this work, we fabricated 4.4 V pouch cells to assess in detail the practical viability of the PC-based electrolyte in a commercial battery system. In comparison to conventionally used EC-based cells, the pouch cells with the PC-based electrolyte exhibit more excellent high-voltage tolerance and electrochemical performance at all temperature ranges (-40 to 85 °C), demonstrating the wide application prospect of the PC-based electrolyte.

An Overcrowded Water-Ion Solvation Structure for a Robust Anode Interphase in Aqueous Lithium-Ion Batteries

The water-in-salt electrolyte (WISE) features intimate interactions between a cation and anion, which induces the formation of an anion-derived solid electrolyte interphase (SEI) and expands the aqueous electrolyte voltage window to >3.0 V. Although further increasing the salt concentration (even to >60 molality (m)) can gradually improve water stability, issues about cost and practical feasibility are concerned. An alternative approach is to intensify ion-solvent interactions in the inner solvation structure by shielding off outward electrostatic attractions from nearby ions. Here, we design an "overcrowded" electrolyte using the non-polar, hydrogen-bonding 1,4-dioxane (DX) as an overcrowding agent, thereby achieving a robust LiF-enriched SEI and wide electrolyte operation window (3.7 V) with a low salt concentration (<2 m). As a result, the electrochemical performance of aqueous Li₄Ti₅O₁₂/LiMn₂O₄ full cells can be substantially improved (88.5% capacity retention after 200 cycles, at 0.57 C). This study points out a promising strategy to develop low-cost and stable high-voltage aqueous batteries.