Carbon Nitride Supported High-Loading Fe Single-Atom Catalyst for Activating of Peroxymonosulfate to Generate 1 O2 with 100 % Selectivity

Enhancement of peroxymonosulfate activation with nickel foam-supported CuCo2O4 for tetracycline degradation: Performance and mechanism insights

The modulation of bimetallic oxide structures and development of efficient, easily recoverable catalysts are expected to effectively overcome the limitations associated with powdered catalysts in activating peroxymonosulfate (PMS). In this study, CuCo2O4 was successfully immobilized on the surface of nickel foam (NF) via an electrodeposition-calcination procedure, with highly efficient activation of PMS for tetracycline (TC) degradation (0.55 min-1). Besides acting as a support carrier and providing ample active sites, NF mediated electron transport, prevented the leaching of metal ions and enhanced the efficiency of recycling. Density functional theory (DFT) calculations and experimental tests illustrated that Cu/Co dual-sites can efficiently adsorb PMS, enabling simultaneous reduction and oxidation reactions. The dual-site synergy substantially decreased the adsorption barrier and increased the electron transfer rate. Especially, the Cu+/Cu2+ redox couple acted as an electron donor and facilitated rapid charge transfer, leading to the conversion of Co3+ to Co2+. Moreover, the CuCo2O4@NF + PMS system effectively eliminated TC by employing radical pathways (SO4•-, •OH) and nonradical processes (1O2, e-). Therefore, this study introduces a new approach to overcome the limitations of powdered bimetallic oxides, providing a promising solution for practical applications.

Novel catalytic behavior of defective nanozymes with catalase-mimicking characteristics for the degradation of tetracycline

Although nanozymes have shown significant potential in wastewater treatment, enhancing their degradation performance remains challenging. Herein, a novel catalytic behavior was revealed for defective nanozymes with catalase-mimicking characteristics that efficiently degraded tetracycline (TC) in wastewater. Hydroxyl groups adsorbed on defect sites facilitated the in-situ formation of vacancies during catalysis, thereby replenishing active sites. Additionally, electron transfer considerably enhanced the catalytic reaction. Consequently, numerous reactive oxygen species (ROS) were generated through these processes and subsequent radical reactions. The defective nanozymes, with their unique catalytic behavior, proved effective for the catalytic degradation of TC. Experimental results demonstrate that •OH, •O2-, 1O2 and e- were the primary contributors to the degradation process. In real wastewater samples, the normalized degradation rate constant for defective nanozymes reached 26.0 min-1 g-1 L, exceeding those of other catalysts. This study reveals the new catalytic behavior of defective nanozymes and provides an effective advanced oxidation process for the degradation of organic pollutants.

Precise manipulation of iron spin states in single-atom catalytic membranes for singlet oxygen selective production

Heterogeneous single-atom catalysts are attracting substantial attention for selectively generating singlet oxygen (1O2). However, precise manipulation of atom coordination structures remains challenging. Here, the fine coordination structure of iron single-atom carbon-nitride catalysts (Fe-CNs) was manipulated by precisely tuning the heating rate with 1 °C min-1 difference. Multiple techniques in combination with density functional theory (DFT) calculations reveal that FeN6 coordination sites with high Fe spin states promote the adsorption, electron transfer, and dissociation of peroxymonosulfate (PMS), resulting in nearly 100% selection of 1O2 generation. A lamellar single atom catalytic membrane is constructed, exhibiting high permeance, high degradation, high-salinity resistance and sustained operation stability. This work provides ideas for regulating spin states of the metal site to fabricate catalysts with selective 1O2 generation for membrane separation and environment catalysis applications.

Mesoporous Atomically Dispersed Fe Catalysts with Enhanced Nonradical Pathways in Fenton-like Reactions: The Role of SiO2 Templates

Single-atom catalysts (SACs) are extensively applied in Fenton-like catalytic processes to treat water pollutants. However, the role of the porous structures of SACs supports in catalytic reactions is often overlooked despite its significant contribution to mass diffusion during the reaction. Herein, we adopted a hard-template-assisted approach to fabricate Fe-based SACs (Fe-SACs) featuring a mesoporous architecture. The SiO2 template not only adjusts the pore architecture of the support but also facilitates the conversion of active sites from nanoscale sites to single-atom sites, thereby improving the selectivity for pollutant degradation via nonradical pathways (singlet oxygen and electron transfer mechanism). The experimental results demonstrated that using large-sized SiO2 (∼200 nm) as a template leads to metal aggregation on its surface, forming Fe nanoparticles (Fe-NPs). Fe-NPs exhibit narrow pore structures that prevent peroxymonosulfate (PMS) from being activated, resulting in a slow degradation of pollutants primarily through radical pathways. In contrast, employing small-sized SiO2 (∼10 nm) as a hard template not only produces supports with mesoporous structures but also promotes the building of single-atom active sites. The prepared Fe-SACs effectively activated PMS through nonradical pathways and removed contaminants at a rate k of 0.89 min-1, 33 times faster than Fe-NPs. This template-assisted method sheds light on the synthesis of effective Fenton-like catalysts with porous structures that enhance the efficient breakdown of contaminants in wastewater.

Highly selective regulation of non-radical and radical mechanisms by Co cubic assembly catalysts for peroxymonosulfate activation

Peroxymonosulfate (PMS) activation on efficient catalysts is a promising strategy to produce sulfate radical (SO4-) and singlet oxygen (1O2) for the degradation of refractory organic pollutants. It is a great challenge to selectively generate these two reactive oxygen species, and the regulation mechanism from non-radical to radical pathway and vice versa is not well established. Here, we report a strategy to regulate the activation mechanism of PMS for the selective generation of SO4- and 1O2 with 100 % efficiency by sulfur-doped cobalt cubic assembly catalysts that was derived from the Co-Co Prussian blue analog precursor. This catalyst showed superior catalytic performance in activating PMS with normalized reaction rate increased by 87 times that of the commercial Co3O4 nanoparticles and had much lower activation energy barrier for the degradation of organic pollutant (e.g., p-chlorophenol) (18.32 kJ⋅mol-1). Experimental and theoretical calculation results revealed that S doping can regulate the electronic structure of Co active centers, which alters the direction of electron transfer between catalyst and PMS. This catalyst showed a strong tolerance to common organic compounds and anions in water, wide environmental applicability, and performed well in different real-water systems. This study provides new opportunities for the development of metal catalyst with metal-organic frameworks structure and good self-regeneration ability geared specifically towards PMS-based advanced oxidation processes applied for water remediation.

Atomic Zn-N4 Site-Regulated Donor-Acceptor Catalyst for Boosting Photocatalytic Bactericidal Activity

Reactive oxygen species (ROS)-mediated photocatalytic antibacterial materials are emerging as promising alternatives for the antibiotic-free therapy of drug-resistant bacterial infections. However, the overall efficiency of photocatalytic sterilization is restricted by the rapid recombination of the charge carriers. Herein, we design an in-plane π-conjugated donor-acceptor (D-A) system (g-C3N4-Zn-NC), comprising graphitic carbon nitride (g-C3N4) as the donor and Zn single-atom anchored nitrogen-doped carbon (Zn-NC) as the acceptor. Experimental and theoretical results reveal that the introduction of Zn-NC induces the formation of an intermediate band in g-C3N4-Zn-NC, extending the spectral absorption range and facilitating charge carrier transfer and separation. Additionally, the synergistic effects of the dual sites, the N═C-N sites of the g-C3N4 "donor" and the atomic Zn-N4 sites of the Zn-NC "acceptor", boost ROS production. Consequently, the biocompatible g-C3N4-Zn-NC effectively kills methicillin-resistant Staphylococcus aureus (MRSA) under visible-light irradiation and promotes the healing of MRSA-infected wounds on mouse skin.

Activation of PAA at the Fe-Nx Sites by Boron Nitride Quantum Dots Enhanced Charge Transfer Generates High-Valent Metal-Oxo Species for Antibiotics Degradation

Advanced oxidation processes (AOPs) based on peracetic acid (PAA) offer a promising strategy to address antibiotic wastewater pollution. In this study, Fe-doped graphitic carbon nitride (g-C3N4) nanomaterials were used to construct Fe-Nx sites, and the electronic structure was tuned by boron nitride quantum dots (BNQDs), thereby optimizing PAA activation for the degradation of antibiotics. The BNQDs-modified Fe-doped g-C3N4 catalyst (BNQDs-FCN) achieved an excellent reaction rate constant of 0.0843 min-1, marking a 21.6-fold improvement over the carbon nitride (CN)-based PAA system. DFT calculations further corroborate the superior adsorption capacity of the Fe-Nx sites for PAA, facilitating its activation. Charge transfer mechanisms, with PAA serving as an electron acceptor, were identified as the source of high-valent iron-oxo species. Moreover, the BNQDs-FCN system preferentially targets oxygen-containing functional groups in antibiotic structures, elucidating the selective attack patterns of these highly electrophilic species. This research not only elucidates the pivotal role of high-valent iron-oxo species in pollutant degradation within the PAA-AOPs framework but also pioneers a wastewater treatment system characterized by excellent degradation efficiency coupled with low ecological risk, thereby laying the groundwork for applications in wastewater management and beyond.

Compressive interatomic distance stimulates photocatalytic oxygen-oxygen coupling to hydrogen peroxide

Photocatalytic hydrogen peroxide (H2O2) generation is largely subject to the sluggish conversion kinetics of the superoxide radical (O2⋅-) intermediate, which has relatively low reactivity and requires high energy. Here, we present a lattice-strain strategy to accelerate the conversion of O2⋅- to highly active singlet oxygen(1O2) by optimizing the distance between two adjacent active sites, thereby stimulating H2O2 generation via low-barrier oxygen-oxygen coupling. As the initial demonstration, the defect-induced strain in ZnIn2S4 nanosheet optimizes the distance of two adjacent Zn sites from 3.85 to 3.56 Å, resulting in that ZnIn2S4 with 0.7% compressive strain affords 3086.00 μmol g-1 h-1 yield of H2O2 with sacrificial agent. This performance is attributed to the strain-induced enhancement of electron coupling between the compressed adjacent Zn sites, which promotes low-barrier oxygen-oxygen coupling to active 1O2 intermediate. This finding paves the way for atomic-scale manipulation of reactive sites, offering a promising approach for efficient H2O2 photosynthesis.

Melamine enhancing Cu-Fenton reaction for degradation of anthracyclines

Melamine (MA) enhanced Cu-Fenton process was developed for the degradation of anthracyclines. Taking daunorubicin (DNR) degradation as an example, we found that the initial first-order apparent constant of Cu2+/MA/H2O2 system with a molar ratio of 1:8 for Cu2+:MA was 5.2 times higher than that of conventional Cu2+/H2O2 system. The in-situ reductive coordination between Cu2+ and MA facilitated the generation and stabilization of Cu+ species, thereby accelerating the rate-limiting step of Cu2+/Cu+ conversion and maintaining high levels of Cu+ during the degradation process. Moreover, pre-synthesized Cu+-MA complexes (e.g., CM-250) further enhanced the efficiency of the Cu-Fenton reaction by increasing both the Cu+ proportion and MA chelation. The apparent activation energy for DNR degradation in CM-250 mediated Fenton reaction (15.9 kJ mol-1) was lower than that in systems involving Cu2+/MA (41.2 kJ mol-1) and Cu2+ (65.6 kJ mol-1). Enhanced generation of various reactive oxygen species (·OH,·O2-, and 1O2) was confirmed, with 1O2 playing a dominant role, significantly improving both degradation rate and mineralization degree for DNR. MA-enhanced Cu-Fenton process also offers a convenient alternative to effectively remove other anthracyclines and organic micropollutants, holding great promise for advancing advanced oxidation processes as well as practical large-scale degradation applications targeting multiple pollutants.

Advancements on Single-Atom Catalysts-Mediated Persulfate Activation: Generating Reactive Species for Contaminants Elimination in Water

The single-atom catalyst (SAC) activated persulfate process has emerged as a highly efficient technology for eliminating refractory organic compounds in aqueous environments. This review delves into the intricacies of utilizing SACs for the effective removal of various contaminants in water. The common supports and the preparation procedures of SACs are summarized at first. The synthesis methods of SACs (i.e., wet chemical method, one-pot hydrothermal method, and high-temperature pyrolysis method) are also described. Then, a comprehensive overview of the diverse reaction mechanisms in SAC-activated persulfate systems is presented, including a radical oxidation process via sulfate or hydroxyl radicals and superoxide radicals, or a nonradical process via single oxygen, surface active complex, and high-valent metal-oxo species oxidation. The impact of key factors such as peroxides concentration, SAC dosage, reaction pH, inorganic anions, organic matter, operando stability, and real water is also delved. The removal of various pollutants (i.e., azo dyes, phenolic compounds, pharmaceuticals, and bacteria) by this process is further summarized. Finally, the challenges and perspectives in the field of water treatment utilizing SACs are discussed.

Boosted H2O2 utilization and selective hydroxyl radical generation for water decontamination: Synergistic roles of dual active sites in H2O2 activation

H2O2 as a green oxidant plays a crucial role in numerous green chemical reactions. However, how to improve its activation and utilization efficiency as well as regulate the distribution of ROS remains a pressing challenge. In this work, a sulfur quantum dots (SQDs) modified zero-valent iron (SQDs@ZVI) was delicately designed and prepared, whose iron sites can coordinate with strongly electronegative sulfur atoms to construct highly reactive Fe-S dual active sites, for high-efficient selective H2O2 activation and utilization with potent •OH production. Experimental tests, in situ FTIR/Raman spectra and theoretical calculations demonstrated that SQDs modulates the local coordination structure and electronic density of iron centers, thus effectively enhancing its Fenton reactivity and promoting the rate-limiting H2O2 adsorption and subsequent barrierless dissociation of peroxyl bonds into •OH via the formation of bridged S-O-O-Fe complexes. Consequently, substantial generated surface-bound •OH induced by the highly reactive Fe-S dual sites enabled excellent degradation of miscellaneous organic pollutants over a broad pH range (3.0-9.0). The developed device-scale Fenton filter realized durable performance (up to 200 h), verifying the vast potential of SQDs@ZVI with diatomic sites for practical application. This work presents a promising strategy to construct metal-nonmetal diatomic active sites toward boosting selective activation and effective utilization of H2O2, which may inspire the design of efficient heterogeneous Fenton reaction for water decontamination.

Unraveling the Fundamentals of Axial Coordination FeN4+1 Sites Regulating the Peroxymonosulfate Activation for Fenton-Like Activity

Precise modulation of the axial coordination microenvironment in single-atom catalysts (SACs) to enhance peroxymonosulfate (PMS) activation represents a promising yet underexplored approach. This study introduces a pyrolysis-free strategy to fabricate SACs with well-defined axial-FeN4+1 coordination structures. By incorporating additional out-of-plane axial nitrogen into well-defined FeN4 active sites within a planar, fully conjugated polyphthalocyanine framework, FeN4+1 configurations are developed that significantly enhance PMS activation. The axial-FeN4+1 catalyst excelled in activating PMS, with a high bisphenol A (BPA) degradation rate of 2.256 min-1, surpassing planar-FeN4/PMS systems by 6.8 times. Theoretical calculations revealed that the axial coordination between N and the Fe sites forms an optimized axial FeN4+1 structure, disrupting the electron distribution symmetry of Fe and optimizing the electron distribution of the Fe 3d orbital (increasing the d-band center from -1.231 to -0.432 eV). Consequently, this led to an enhanced perpendicular adsorption energy of PMS from -1.79 to -1.82 eV and reduced energy barriers for the formation of the key reaction intermediate (O*) that generates 1O2. This study provides new insights into PMS activation through the axial coordinated engineering of well-defined SACs in water purification processes.

A tartaric acid (TA)-coated iron-based biochar as heterogeneous fenton catalyst for enhanced degradation of dibutyl phthalate

Iron-biochar composite is a promising catalyst in Fenton-like system for removal of organic pollutants. Nevertheless, low cycling rate of Fe(III)/Fe(II), high iron leaching and low H2O2 utilization efficiency impedes its application. Herein, a iron-based biochar (C-Fe) coated with tartaric acid (TA) was synthesized. The specific structure of inherent graphitized carbon and TA coating improved the removal efficiency of dibutyl phthalate (DBP) to 93%, promoted 2-fold increase in HO• production in H2O2 activation, improved the cycling rate of Fe(III)/Fe(II), and mitigated Fe leaching significantly. The developed HO• and 1O2 dominated Fenton-like system had an excellent pH universality and anti-interference to inorganic ions and real water matrixes. Moreover, C-Fe-TA has been shown to efficiently degrade DBP by using the dissolved oxygen in water to generate HO•. This work provided a novel insight for sustainable and efficient HO• and 1O2 generation, which motivated the development of new water treatment technology based on efficient iron-biochar catalyst.

Degradation mechanism and toxicity assessment of clofibric acid by Fe2+/PS process in saline pharmaceutical wastewater

A considerable effort has been made to exploring the oxidation of clofibric acid (CA) in advanced oxidation processes (AOPs). However, few studies are available on degradation mechanism and toxicity assessment of CA in saline pharmaceutical wastewater. Here the effect of chlorine on the degradation kinetics of CA by Fe2+/ persulfate (PS) process were studied. Oxidation efficiency, mineralisation, intermediate by-products, reactive oxygen species (ROS) and toxicity assessment were examined. Notably, a high removal efficiency (70.91%) but low mineralisation (20.99%) of CA were observed at pH 3.0 during the Fe2+/PS system. Furthermore, we found Cl- exerted a beneficial impact on CA degradation. However, the degree of CA mineralisation was relatively minor. Under high salinity (100 mM) condition, the primary reactive species within the Fe2+/PS system were SO 4 ⋅ - , OH·, Cl2/HClO, and Fe(IV). Several undesirable chlorinated by-products were formed. A reasonable degradation pathway was proposed. According to the ecological structure-activity relationship (ECOSAR) programme, some transformation products exhibited higher toxicity levels than CA itself in both acute and chronic toxicity assessment, especially in high-salinity environments. These findings elucidate an increased challenges and ecological risk for CA oxidation by Fe2+/PS treatment in saline pharmaceutical wastewater.

Fundamental Insights into the Direct Electron Transfer Mechanism on Ag Atomic Cluster

The nonradical oxidation pathway for pollutant degradation in Fenton-like catalysis is favorable for water treatment due to the high reaction rate and superior environmental robustness. However, precise regulation of such reactions is still restricted by our poor knowledge of underlying mechanisms, especially the correlation between metal site conformation of metal atom clusters and pollutant degradation behaviors. Herein, we investigated the electron transfer and pollutant oxidation mechanisms of atomic-level exposed Ag atom clusters (AgAC) loaded on specifically crafted nitrogen-doped porous carbon (NPC). The AgAC triggered a direct electron transfer (DET) between the terminal oxygen (Oα) of surface-activated peroxodisulfate and the electron-donating substituents-containing contaminants (EDTO-DET), rendering it 11-38 times higher degradation rate than the reported carbon-supported metal catalysts system with various single-atom active centers. Heterocyclic substituents and electron-donating groups were more conducive to degradation via the EDTO-DET system, while contaminants with high electron-absorbing capacity preferred the radical pathway. Notably, the system achieved 79.5% chemical oxygen demand (COD) removal for the treatment of actual pharmaceutical wastewater containing 1053 mg/L COD within 30 min. Our study provides valuable new insights into the Fenton-like reactions of metal atom cluster catalysts and lays an important basis for revolutionizing advanced oxidation water purification technologies.

Selective generation of hydroxyl and sulfate radicals under electric field regulation for micropollutants degradation: Mechanism and structure-activity relationship

Peroxymonosulfate (PMS) activation generates potent reactive oxygen species (ROS) such as sulfate radical (SO4·-) and hydroxyl radical (·OH), which play a key role in organic pollutant degradation. However, controlling the generation of these free radicals remains challenging. In this study, various metal (Co, Ni, and Cu)-doped nitrogen carbon compounds (NCs) were synthesized, and their performance in PMS activation under electric field regulation was explored to modulate ROS production for selective pollutant degradation. Bisphenol A (BPA), a readily degradable compound, and ibuprofen (IBU), a recalcitrant pollutant, were chosen as model pollutants to assess degradation efficiency. All catalysts achieved over 95 % BPA removal without the electric field, but the application of an electric field significantly accelerated BPA degradation, achieving complete removal within 3 min. In contrast, IBU degradation showed significant variation depending on the catalyst used and the electric field intensity, with Cu-NC demonstrating the highest performance, enhancing the degradation rate by 3.78-fold. Mechanistic studies revealed that the electric field altered the electron density on the catalyst surface, shifting ROS production from SO4·- to·OH in Co-NC systems. The findings could provide valuable insights into PMS activation under electric field regulation, offering a novel strategy for enhancing micropollutant removal through controlled ROS generation.

Aeration-Free Photo-Fenton-Like Reaction Mediated by Heterojunction Photocatalyst toward Efficient Degradation of Organic Pollutants

The regulation of peroxymonosulfate (PMS) activation by photo-assisted heterogeneous catalysis is under in-depth investigation with potential as a replaceable advanced oxidation process in water purification, yet it remains a significant challenge. Herein, we demonstrate a strategy to construct polyethylene glycol (PEG) well-coupled dual-defect VO-M-Co3O4@CNx S-scheme heterojunction to degrade organic pollutants without aeration, which dramatically provides abundant active sites, excellent photo-thermal property, and distinct charge transport pathway for PMS activation. The degradation rate of VO-M-Co3O4@CNx in anaerobic conditions shows a higher efficient rate (4.58 min-1 g-2) than in aerobic conditions (1.67 min-1 g-2). Experimental evidence reveals that VO-M-Co3O4@CNx promotes more rapid redox conversion of photoexcited electrons induced by defects with PMS under anaerobic conditions compared to aerobic conditions. Additionally, in situ experiments and DFT provide mechanistic insights into the regulation pathway of PMS activation via synergistic defect-induced electron, revealing the competitive effect between O2 and PMS over VO-M-Co3O4@CNx during the reaction process. The continuous flow reactor and flow cytometry results demonstrated that the VO-M-Co3O4@CNx/PMS/Vis system has remarkably enhanced stability and purification capability for removing organic pollutants. This work provides valuable insights into regulating the heterologous catalysis oxidation process without aeration through the photoexcitation synergistic PMS activation.

Microenvironment modulation of biocatalyst derived from natural cellulose of wheat straw for enhancing p-nitrophenol degradation via boosting peroxymonosulfate activation

Defect-rich nitrogen-doped biocatalyst (B-NC) was synthesized from natural cellulose of wheat straw using straightforward mechanical method and one-step pyrolysis approach. In contrast to the nitrogen-doped biocatalyst (NC), by leveraging the synergistic effects of nitrogen dopants and surface defects, the microenvironment-modulated B-NC exhibited the enhanced mass transfer efficiency and a significant improvement in reactivity for p-nitrophenol degradation (111 %-196 %). The catalyst's exceptional performance primarily arose from graphitic N, pyridinic N and CO active sites, which mainly derived from the cellulose structure of wheat straw and nitrogen dopants. Electron paramagnetic resonance and quenching tests confirmed that the B-NC/peroxymonosulfate system generated more reactive species (SO4•-, •OH, O2•-, and 1O2) during p-nitrophenol degradation, surpassing the NC/peroxymonosulfate system. Additionally, both density functional theory calculations and electrochemical experiments provided evidence of peroxymonosulfate strongly adsorbing onto B-NC's defect sites, facilitating the formation of catalyst/peroxymonosulfate* complexes and promoting electron transfer processes. This research provides valuable insights into the regulation of defects in nitrogen-doped biocatalyst derived from natural cellulose, presenting a promising solution for remediating refractory organic pollutants.

Regulating the Electronic Structure of Cu Single-Atom Catalysts toward Enhanced Electro-Fenton Degradation of Organic Contaminants via 1O2 and •OH

Heterogeneous electro-Fenton degradation with 1O2 and •OH generated from O2 reduction is cost-effective for the removal of refractory organic pollutants from wastewater. As 1O2 is more tolerant to background constituents such as salt ions and a high pH value than •OH, tuning the production of 1O2 and •OH is important for efficient electro-Fenton degradation. However, it remains a great challenge to selectively produce 1O2 and improve the species yield. Herein, the electronic structure of atomically dispersed Cu-N4 sites was regulated by doping electron-deficient B into porous hollow carbon microspheres (CuBN-HCMs), which improved *O2 adsorption and significantly enhanced 1O2 selectivity in electro-Fenton degradation. Its 1O2 yield was 2.3 times higher than that of a Cu single-atom catalyst without B doping. Meanwhile, •OH was simultaneously generated as a minor species. The CuBN-HCMs were efficient for the electro-Fenton degradation of phenol, sulfamethoxazole, and bisphenol A with a high mineralization efficiency. Its kinetic constants showed insignificant changes under various anions and a wide pH range of 1-9. More importantly, it was energy-efficient for treating actual coking wastewater with a low energy consumption of 19.0 kWh kgCOD-1. The superior performance of the CuBN-HCMs was contributed from 1O2 and •OH and its high 1O2 selectivity.

Dynamic Regulation of Hydrogen Bonding Networks and Solvation Structures for Synergistic Solar-Thermal Desalination of Seawater and Catalytic Degradation of Organic Pollutants

Although solar steam generation strategy is efficient in desalinating seawater, it is still challenging to achieve continuous solar-thermal desalination of seawater and catalytic degradation of organic pollutants. Herein, dynamic regulations of hydrogen bonding networks and solvation structures are realized by designing an asymmetric bilayer membrane consisting of a bacterial cellulose/carbon nanotube/Co2(OH)2CO3 nanorod top layer and a bacterial cellulose/Co2(OH)2CO3 nanorod (BCH) bottom layer. Crucially, the hydrogen bonding networks inside the membrane can be tuned by the rich surface -OH groups of the bacterial cellulose and Co2(OH)2CO3 as well as the ions and radicals in situ generated during the catalysis process. Moreover, both SO42- and HSO5- can regulate the solvation structure of Na+ and be adsorbed more preferentially on the evaporation surface than Cl-, thus hindering the de-solvation of the solvated Na+ and subsequent nucleation/growth of NaCl. Furthermore, the heat generated by the solar-thermal energy conversion can accelerate the reaction kinetics and enhance the catalytic degradation efficiency. This work provides a flow-bed water purification system with an asymmetric solar-thermal and catalytic membrane for synergistic solar thermal desalination of seawater/brine and catalytic degradation of organic pollutants.

Facilely tuning the coating layers of Fe nanoparticles from iron carbide to iron nitride for different performance in Fenton-like reactions

In this study, a series of Fe-based materials are facilely synthesized using MIL-88A and melamine as precursors. Changing the mass ratio of melamine and MIL-88A could tune the coating layers of generated zero-valent iron (Fe0) particles from Fe3C to Fe3N facilely. Compared to Fe/Fe3N@NC sample, Fe/Fe3C@NC exhibits better catalytic activity and stability to degrade carbamazepine (CBZ) with peroxymonosulfate (PMS) as oxidant. Free radical quenching tests, open-circuit potential (OCP) test and electron paramagnetic resonance spectra (EPR) prove that hydroxyl radicals (OH) and superoxide radical (O2-) are dominant reactive oxygen species (ROSs) with Fe/Fe3C@NC sample. For Fe/Fe3N@NC sample, the main ROSs are changed into sulfate radicals (SO4-) and high valent iron-oxo (Fe (IV)=O) species. In addition, the better conductivity of Fe3C is beneficial for the electron transfer from Fe0 to the Fe3C, thus could keep the activity of the surface sites and obtain better stability. DFT calculation reveals the better adsorption and activation ability of Fe3C than Fe3N. Moreover, PMS can also be adsorbed on the Fe sites of Fe3N with shorter FeO bonds and longer SO bonds than on Fe3C, the Fe (IV)=O is thus present in the Fe/Fe3N@NC/PMS system. This study provides a novel strategy for the development of highly active Fe-based materials for Fenton-like reactions and thus could promote their real application.

Non-radical oxidation driven by iron-based materials without energy assistance in wastewater treatment

Chemical oxidation is extensively utilized to mitigate the impact of organic pollutants in wastewater. The non-radical oxidation driven by iron-based materials is noted for its environmental friendliness and resistance to wastewater matrix, and it is a promising approach for practical wastewater treatment. However, the complexity of heterogeneous systems and the diversity of evolutionary pathways make the mechanisms of non-radical oxidation driven by iron-based materials elusive. This work provides a systematic review of various non-radical oxidation systems driven by iron-based materials, including singlet oxygen (1O2), reactive iron species (RFeS), and interfacial electron transfer. The unique mechanisms by which iron-based materials activate different oxidants (ozone, hydrogen peroxide, persulfate, periodate, and peracetic acid) to produce non-radical oxidation are described. The roles of active sites and the unique structures of iron-based materials in facilitating non-radical oxidation are discussed. Commonly employed identification methods in wastewater treatment are compared, such as quenching, chemical probes, spectroscopy, mass spectrometry, and electrochemical testing. According to the process of iron-based materials driving non-radical oxidation to remove organic pollutants, the driving factors at different stages are summarized. Finally, challenges and countermeasures are proposed in terms of mechanism exploration, detection methods and practical applications of non-radical oxidation driven by iron-based materials. This work provides valuable insights for understanding and developing non-radical oxidation systems.

Low-peroxide-consumption fenton-like systems: The future of advanced oxidation processes

Conventional heterogeneous Fenton-like systems employing different peroxides have been developed for water/wastewater remediation. However, a large population of peroxides consumed during various Fenton-like systems with low utilization efficiency and associated secondary contamination have become the bottlenecks for their actual applications. Recent strategies for lowering the peroxide consumptions to develop economic Fenton-like systems are primarily devoted to the effective radical generation and subsequent high-efficiency radical utilization through catalysts/systems engineering, leveraging emerging nonradical oxidation pathways with higher selectivity and longer life of the reactive intermediate, as well as reactor designs for promoting the mass transfer and peroxides decomposition to improve the yield of radicals/nonradicals. However, a comparative review summarizing the mechanisms and pathways of these strategies has not yet been published. In this review, we endeavor to showcase the designated systems achieving the reduction of peroxides while ensuring high catalytic activity from the perspective of the above strategic mechanisms. An in-depth understanding of these aspects will help elucidate the key mechanisms for achieving economic peroxide consumption. Finally, the existing problems of these strategies are put forward, and new ideas and research directions for lowering peroxide consumption are proposed to promote the application of various Fenton-like systems in actual wastewater purification.

Synergy of atomic hydrogen reduction and reactive oxygen species oxidation over confined Mn bifunctional site for electrocatalytic deep mineralization

Traditional reduction or oxidation processes generating one-component free radicals face challenges in deep dechlorination and mineralization of chlorophenols from wastewater. Herein, an efficient electrocatalytic process has been developed, which couples atomic H* reduction with reactive oxidation species (•OH and 1O2) oxidation on a bifunctional cathode for 4 -chlorophenol (4 -CP) removal. The N - doped carbon nanotubes encapsulated manganese nanoparticles was fabricated as cathode, which could generate atomic H* , initiating nucleophilic hydrodechlorination in presence of confined MnO sites. Subsequently, electrophilic oxidation by generating mainly 1O2 on confined Mn7C3 sites and •OH on confined MnO sites, facilitating the oxidative processes. Experimental results and theory calculations demonstrated that reductive dechlorination and oxidative mineralization processes could mutually promote each other, resulting in an enhancement factor of 2.90. At pH 7, this process achieved 100 % removal for 4 -CP, 84 % dechlorination, 76 % total organic carbon (TOC) removal and low energy consumption (0.76 kWh g-1TOC) within 120 min. Notably, TOC for chlorophenols containing Cl substituents at different positions and real lake water containing 4 -CP could be almost completely removed. This research establishes confined non-noble bifunctional active sites that synergistically enhance reductive dechlorination and oxidative degradation processes, holding significant treatment potential for application in deep mineralization of organochlorine from water/wastewater.

A Nanoconfined FeCo2O4-Embedded Ceramic Membrane Regulates Electron Transfer in Peroxymonosulfate Activation to Selectively Generate Singlet Oxygen for Water Decontamination

Peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs), as a promising technology for water decontamination, are constrained by low reaction kinetics due to limited reaction selectivity and mass transfer. Herein, we designed a nanoconfined FeCo2O4-embedded ceramic membrane (FeCo2O4-CM) under flow-through pattern for PMS activation. Confining PMS and FeCo2O4 within nanochannels (3.0-4.7 nm) enhanced adsorption interactions (-7.84 eV vs -2.20 eV), thus boosting mass transfer. Nanoconfinement effect regulated electron transfer pathways from PMS to FeCo2O4-CM by modulating the active site transformation to ≡Co(III) in nanoconfined FeCo2O4-CM, enabling selectively generating 1O2. The primary role of 1O2 in the nanoconfined system was confirmed by kinetic solvent isotope experiments and indicative anthracene endoperoxide (DPAO2). The system enabled 100% removal of atrazine (ATZ) within a hydraulic retention time of 2.124 ms, demonstrating a rate constant over 5 orders of magnitude higher than the nonconfined system (3.50 × 103 s-1 vs 0.42 min-1). It also exhibited strong resilience to pH variations (3.3-9.0) and coexisting substances, demonstrating excellent stability indicated by consistent 100% ATZ removal for 14 days. This study sheds light on regulating electron transfer pathways to selectively generate 1O2 through the nanoconfinement effect, boosting the practical application of PMS-based AOPs in environmental remediation and potentially applying them to various other AOPs.

Degradation of UV328 by ozone/peroxymonosulfate system: Performance and mechanisms

2-(2H-benzotriazol-2-yl)-4,6-di-tert-pentylphenol (UV328) is an emerging persistent organic pollutant ubiquitously found in environmental matrices. Though some advanced oxidation processes have been tested to degrade UV328 in waste streams, the degradation mechanisms are largely unknown. In this study, the degradation of UV328 by ozone (O3) and peroxymonosulfate (PMS) was systemically investigated. At neutral pH, 97.0% UV328 was removed in 5 min with 6.4 mg/min O3 and 2 mM PMS, and the degradation rate was positively correlated with the concentration of oxidants. Hydroxyl radical (•OH), sulfate radical (SO4•-) and singlet oxygen (1O2) participated in the degradation of UV328, in which 1O2 played a key role. Based on the identified transformation intermediates and density functional theory simulations, three degradation pathways of dehydrogenation, cycloaddition and hydroxylation were proposed. •OH and SO4•- radicals could attack UV328 through hydrogen atom abstraction channel. 1O2-mediated cycloaddition reaction is favorable, and •OH could react with UV328 via radical adduct formation pathway. Toxicity assessment indicated that O3/PMS treatment mitigated the ecological risks of UV328.

Optimal Oxophilicity at the Fe-Nx Interface Enhances the Generation of Singlet Oxygen for Efficient Fenton-Like Catalysis

In the pursuit of efficient singlet oxygen generation in Fenton-like catalysis, the utilization of single-atom catalysts (SACs) emerges as a highly desired strategy. Here, a discovery is reported that the single-atom Fe coordinated with five N-atoms on N-doped porous carbon, denoted as Fe-N5/NC, outperform its counterparts, those coordinated with four (Fe-N4/NC) or six N-atoms (Fe-N6/NC), as well as state-of-the-art SACs comprising other transition metals. Thus, Fe-N5/NC exhibits exceptional efficacy in activating peroxymonosulfate for the degradation of organic pollutants. The coordination number of N-atoms can be readily adjusted by pyrolysis of pre-assembly structures consisting of Fe3+ and various isomers of phenylenediamine. Fe-N5/NC displayed outstanding tolerance to environmental disturbances and minimal iron leaching when incorporated into a membrane reactor. A mechanistic study reveals that the axial ligand N reduces the contribution of Fe-3d orbitals in LUMO and increases the LUMO energy of Fe-N5/NC. This, in turn, reduces the oxophilicity of the Fe center, promoting the reactivity of *OO intermediate-a pivotal step for yielding singlet oxygen and the rate-determining step. These findings unveil the significance of manipulating the oxophilicity of metal atoms in single-atom catalysis and highlight the potential to augment Fenton-like catalysis performance using Fe-SACs.

Constructing Tandem Fenton-like Reaction Systems Based on Structure Adaption to Boost Water Contaminant Mineralization Efficiency

Mineralization of emerging contaminants by using advanced oxidation processes (AOPs) is a desirable option to ensure water safety, but still challenged by the excessive chemical and/or energy input. Here, we conceptually proposed the tandem reaction system (TRS) of different reactive oxygen species (ROS) based on structure adaption of target contaminants. To construct a model TRS, we first realized highly selective generation of three classical ROS (1O2, HO⋅ and SO4⋅-) by peroxymonosulfate activation in an electrochemical Fenton-like system, where three replaceable Fe-centered cathodes were rationally designed as electronic mediator. The 1O2+SO4⋅--TRS exhibited nearly 100 % mineralization of sulfamethoxazole (SMX), whereas only 34.2 %, 56.2 % and 60.8 % for each of the single 1O2/HO⋅/SO4⋅--AOP systems. Mechanism exploration of SMX degradation in TRS evidenced that the initial reaction with 1O2 selectively destructed the sulfonamide bridge of SMX to form p-aminobenzenesulfonic acid, which will be vulnerable to sequent SO4⋅- attack to facilitate mineralization. Successful extendibility of 1O2+SO4⋅--TRS to other sulfonamide antibiotics and 1O2+HO⋅-TRS to phenolic and arylcarboxylic compounds, as well as the demonstration of 1O2+SO4⋅--TRS in treatment of three actual pharmaceutical wastewaters strongly support that TRS is a powerful and sustainable strategy to enhance the mineralization of emerging contaminants in water.

Interlayer synergistic reaction of radical precursors for ultraefficient 1O2 generation via quinone-based covalent organic framework

Singlet oxygen (1O2) is important in the environmental remediation field, however, its efficient production has been severely hindered by the ultrafast self-quenching of the as-generated radical precursors in the Fenton-like reactions. Herein, we elaborately designed lamellar anthraquinone-based covalent organic frameworks (DAQ-COF) with sequential localization of the active sites (C═O) at molecular levels for visible-light-assisted peroxymonosulfate (PMS) activation. Theoretical and experimental results revealed that the radical precursors (SO5·-) were formed in the nearby layers with the migration distance less than 0.34 nm, via PMS donating electrons to the photogenerated holes. This interlayer synergistic effect eventually led to ultraefficient 1O2 production (14.8 μM s-1), which is 12 times that of the highest reported catalyst. As an outcome, DAQ-COF enabled the complete degradation of bisphenol A in 5 min with PMS under natural sunlight irradiation. This interlayer synergistic concept represents an innovative and effective strategy to increase the utilization efficiency of ultrashort-lived radical precursors, providing inspirations for subtle structural construction of Fenton-like catalysts.

Pomelo peel biomass derived highly active advanced-oxidation-process catalyst: Complete elimination of organic pollutants

The advanced oxidation process (AOPs) is playing an important role in the elimination of hazardous organic pollutants, but the development of inexpensive and highly active advanced catalysts is facing challenges. In this study, a low-cost and readily available agricultural waste resource pomelo peel-flesh (PPF) biomass was used as the basic raw material, and the uniformly dispersed small cobalt nanoparticles were effectively anchored in the biochar derived from pomelo peel-flesh (BDPPF) by impregnation adsorption/complexation combined with heat treatment. Co/BDPPF (BDPPF embedded with Co) can effectively activate peroxymonosulfate (PMS) to SO4·-, ·OH and 1O2 reactive oxygen species, and achieve nearly 100% degradation of tetracycline persistent organic pollutant. Co/BDPPF can not only degrade tetracycline efficiently in complex water environment, but also degrade most organic pollutants universally, and has long-term stability, which solves the problem of poor universality and stability of heterogeneous catalysts to a certain extent. Importantly, Co/BDPPF derived from waste biomass was also innovatively designed as the core of an integrated continuous purification device to achieve continuous purification of organic wastewater. In this study, agricultural waste resources were selected as biomass raw materials to achieve efficient capture of Co2+, and finally developed advanced AOPs catalyst with excellent performance to achieve the purification of organic wastewater. It also provides a promising solution for the preparation of simple, low-cost, large-scale production of AOPs catalysts that can be put into actual production.

Selective oxidation behavior based on iron-doped MOF derived carbon-based catalysts: Active site regulation and degradation mechanism analysis

Selective removal of target organic pollutants in complex water quality of municipal sewage is extremely important for the deep treatment of water quality. Here, energetic MOF and Fe-MOF are doped in electrostatic spinning process to adjust the structure and composition of the catalysts, active oxygen species (ROSs), realizing the selective removal of organic pollutants. Non-azo and azo pollutants are selected as target pollutants. Catalysts PCFe-8 with Fe nanoclusters, EPCFe-8 with Fe-Nx, and EPC-8 without Fe doping are used to activate peroxymonosulfate (PMS) for degrading pollutants. The results show that the PCFe-8/PMS system can produce the most SO4- and exhibit superior removal of azo pollutants, whereas the degradation behavior of non-azo pollutants is more inclined to occur in the EPCFe-8/PMS system and the EPC-8/PMS system. This work provides a reference for elucidating the relationship between catalyst structure and components, types of ROSs, and selective degradation of pollutants.

Performance enhancement and mechanism of electroenhanced peroxymonosulfate activation by single-atom Fe catalyst modified electrodes

Peroxymonosulfate-based electrochemical advanced oxidation processes (PMS-EAOPs) have great potential for sustainable water purification, so an in-depth understanding of its catalytic mechanism is imperative to facilitate its practical application. Herein, the performance enhancement and mechanism of electroenhanced PMS activation by single-atom Fe catalyst modified carbon felt was investigated. Compared with the anode, the cathode exhibited faster bisphenol A degradation (kcathode = 0.073 vs. kanode = 0.015 min-1), increased PMS consumption (98.8 vs. 10.3%), and an order of magnitude reduction of Fe dissolution (0.068 vs. 0.787 mg L-1). Mass transfer is a key factor limiting PMS activation, while the electrostriction of water in the hydrophobic region caused by cathode electric field (CEF) significantly increased mass transfer coefficient (km, cathode = 1.49 × 10-4 vs. km, anode = 2.68 × 10-5 m s-1). The enhanced activation of PMS is a synergistic result between electroactivation and catalyst-activation, which is controlled by the applied current density. 1O2 and direct electron transfer are the main active species and activation pathway, which achieve high degradation efficiency over pH 3 to 10. Density functional theory calculations prove CEF increases the adsorption energy, lengthens the O-O bond in PMS, and promotes charge transfer. A flow-through convection unit achieves sustainable operation with high removal efficiency (99.5% to 97.5%), low electrical energy consumption (0.15 kWh log-1 m-3), and low Fe leaching (0.81% of the total single atom Fe). This work reveals the critical role of electric fields in modulating Fenton-like catalytic activity, which may advance the development of advanced oxidation processes and other electrocatalytic applications.

Regulating Reactive Oxygen Intermediates of Fe-N-C SAzyme via Second-Shell Coordination for Selective Aerobic Oxidation Reactions

Reactive oxygen species (ROS) regulation for single-atom nanozymes (SAzymes), e.g., Fe-N-C, is a key scientific issue that determines the activity, selectivity, and stability of aerobic reaction. However, the poor understanding of ROS formation mechanism on SAzymes greatly hampers their wider deployment. Herein, inspired by cytochromes P450 affording bound ROS intermediates in O2 activation, we report Fe-N-C containing the same FeN4 but with tunable second-shell coordination can effectively regulate ROS production pathways. Remarkably, compared to the control Fe-N-C sample, the second-shell sulfur functionalized Fe-N-C delivered a 2.4-fold increase of oxidase-like activity via the bound Fe=O intermediate. Conversely, free ROS (⋅O2 -) release was significantly reduced after functionalization, down to only 17 % of that observed for Fe-N-C. The detailed characterizations and theoretical calculations revealed that the second-shell sulfur functionalization significantly altered the electronic structure of FeN4 sites, leading to an increase of electron density at Fermi level. It enhanced the electron transfer from active sites to the key intermediate *OOH, thereby ultimately determining the type of ROS in aerobic oxidation process. The proposed Fe-N-Cs with different second-shell anion were further applied to three aerobic oxidation reactions with enhanced activity, selectivity, and stability.

The Surface Confinement of FeO Assists in the Generation of Singlet Oxygen and High-Valent Metal-Oxo Species for Enhanced Fenton-Like Catalysis

Transition metal compounds (TMCs) have long been potential candidate catalysts in persulfate-based advanced oxidation process (PS-AOPs) due to their Fenton-like catalyze ability for radical generation. However, the mechanism involved in TMCs-catalyzed nonradical PS-AOPs remains obscure. Herein, the growth of FeO on the Fe3O4/carbon precursor is regulated by restricted pyrolysis of MIL-88A template to activate peroxymonosulfate (PMS) for tetracycline (TC) removal. The higher FeO incorporation conferred a 2.6 times higher degradation performance than that catalyzed by Fe3O4 and also a higher interference resistance to anions or natural organic matter. Unexpectedly, the quenching experiment, probe method, and electron paramagnetic resonance quantitatively revealed that the FeO reassigned high nonradical species (1O2 and FeIV═O) generation to replace original radical system created by Fe3O4. Density functional theory calculation interpreted that PMS molecular on strongly-adsorbed (200) and (220) facets of FeO enjoyed unique polarized electronic reception for surface confinement effect, thus the retained peroxide bond energetically supported the production of 1O2 and FeIV═O. This work promotes the mechanism understanding of TMCs-induced surface-catalyzed persulfate activation and enables them better perform catalytic properties in wastewater treatment.

Synthesis of iron phthalocyanine/CeO2 Z-scheme nanocomposites as efficient photocatalysts for degradation of 2,4-dichlorophenol

Modulating the photogenerated electrons of CeO2 to activate O2 and efficiently photocatalytic degradation of chlorophenols is a highly desired goal. Herein, we have successfully fabricated an FePc/CeO2 heterojunction through H-bond induced assembly. The photocatalytic degradation of 2,4-DCP by the amount-optimized FePc/CeO2 nanocomposite was improved by 3 times compared with that by pure CeO2. By means of electron paramagnetic resonance (EPR) and single wavelength photocurrent spectroscopy, it is confirmed that the excellent photocatalytic performance is mainly attributed to the formation of the Z-scheme heterojunction, which promotes charge separation and transfer, and the introduction of FePc broadens the visible light absorption range of the heterojunction. Moreover, O2 temperature-programmed-desorbed curves and electrochemical O2 reduction measurement results demonstrate that the single Fe-N4(II) site in FePc is more conducive to promoting O2 activation than that of other metal phthalocyanines. Based on in situ FT-IR and liquid chromatography-tandem mass spectrometry (LC-MS/MS), a possible reaction pathway of 2,4-DCP degradation was proposed. This study provides a novel strategy for preparing CeO2 based Z-scheme heterojunctions with abundant monoatomic sites for pollutant degradation.

Multi-channel electron transfer induced by polyvanadate in metal-organic framework for boosted peroxymonosulfate activation

Catalytic peroxymonosulfate (PMS) activation processes don't solely rely on electron transfer from dominant metal centers due to the complicated composition and interface environment of catalysts. Herein the synthesis of a cobalt based metal-organic framework containing polyvanadate [V4O12]4- cluster, Co2(V4O12)(bpy)2 (bpy = 4,4'-bipyridine), is presented. The catalyst demonstrates superior degradation activity toward various micropollutants, with higher highest occupied molecular orbital (HOMO), via nonradical attack. The X-ray absorption spectroscopy and density functional theory (DFT) calculations demonstrate that Co sites act as both PMS trapper and electron donor. In situ spectral characterizations and DFT calculations reveal that the terminal oxygen atoms in the [V4O12]4- electron sponge could interact with the terminal hydrogen atoms in PMS to form hydrogen bonds, promoting the generation of SO5* intermediate via both dynamic pull and direct electron transfer process. Further, Co2(V4O12)(bpy)2 exhibits long-term water purification ability, up to 40 h, towards actual wastewater discharged from an ofloxacin production factory. This work not only presents an efficient catalyst with an electron sponge for water environmental remediation via nonradical pathway, but also provides fundamental insights into the Fenton-like reaction mechanism.

The mechanism differences between sulfadiazine degradation and antibiotic resistant bacteria inactivation by iron-based graphitic biochar and peroxydisulfate system

In this study, the activation of peroxydisulfate (PS) by K2FeO4-activation biochar (KFeB) and acid-picking K2FeO4-activation biochar (AKFeB) was investigated to reveal the mechanism differences between iron site and graphitic structure in sulfadiazine (SDZ) degradation and ARB inactivation, respectively. KFeB/PS and AKFeB/PS systems had similar degradation property towards SDZ, but only KFeB/PS system showed excellent bactericidal property. The mechanism study demonstrated that dissolved SDZ was degraded through electron transfer pathway mediated by graphitic structure, while suspended ARB was inactivated through free radicals generated by iron-activated PS, accompanied by excellent removal on antibiotic resistance genes (ARGs). The significant decrease in conjugative transfer frequency indicated the reduced horizontal gene transfer risk of ARGs after treatment with KFeB/PS system. Transcriptome data suggested that membrane protein channel disruption and adenosine triphosphate synthesis inhibition were key reasons for conjugative transfer frequency reduction. Continuous flow reactor of KFeB/PS system can efficiently remove antibiotics and ARB, implying the potential application in practical wastewater purification. In conclusion, this study provides novel insights for classified and collaborative control of antibiotics and ARB by carbon-based catalysts driven persulfate advanced oxidation technology.

Discerning the Relevance of Singlet Oxygen in Pollutant Degradation in Peroxymonosulfate Activation Processes

Significant efforts have recently been exerted toward construction of singlet oxygen (1O2)-dominated catalytic oxidation systems for selective removal of organic contaminants from wastewater, with peroxides serving as the chemical source. However, the relevance of 1O2 in the removal of pollutants remains ambiguous and requires elucidation. In this study, we scrupulously exclude the significant role of 1O2 in contaminant degradation in various peroxymonosulfate (PMS) activation systems. Multiple experimental results indicate that the activation of PMS catalyzed by CuO, MnO2, Fe-doped g-C3N4 (Fe-CN), or N-doped graphite does not predominantly follow the 1O2 pathway. More importantly, the reactivity of 1O2 is remarkably overestimated in the literature, given its inferior capacity in degradation of a range of heterocyclic contaminants and aromatic compounds possessing electron-withdrawing groups. In addition, the strong physical quenching effect of water, coupled with the low oxidizing ability of 1O2, would notably reduce the utilization efficiency of peroxide, which is particularly apparent in the degradation of micropollutants. We reckon that this study is expected to end the long-running dispute associated with the relevance of 1O2 in pollutant removal.

Advanced Characterization Techniques and Theoretical Calculation for Single Atom Catalysts in Fenton-like Chemistry

Single-atom catalysts (SACs) have attracted extensive attention due to their unique catalytic properties and wide range of applications. Advanced characterization techniques, such as energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy, and X-ray absorption fine-structure spectroscopy, have been used to investigate the elemental compositions, structural morphologies, and chemical bonding states of SACs in detail, aiming at unraveling the catalytic mechanism. Meanwhile, theoretical calculations, such as quantum chemical calculations and kinetic simulations, were used to predict the catalytic reaction pathways, active sites, and reaction kinetic behaviors of SACs, providing theoretical guidance for the design and optimization of SACs. This review overviews advanced characterization techniques and theoretical calculations for SACs in Fenton-like chemistry. Moreover, this work highlights the importance of advanced characterization techniques and theoretical calculations in the study of SACs and provides perspectives on the potential applications of SACs in the field of environmental remediation and the challenges of practical engineering.

Ultra-efficient peroxymonosulfate utilization and trichloroethylene degradation in heterogeneous catalytic system guided by sheet-like Cu2MnO4 nanoparticles: The role of Cu(III)-O species and free radicals

Synthesizing cubic spinel Cu2MnO4 with nanosheet structure (SCMO) aimed to construct a "non-radical-mediated radical-oxidative reaction", for increasing PMS utilization efficiency, and solving the defects of SO4•- and •OH through indirect PMS activation by electron transfer process. Compared with box-like Cu2MnO4 (11.1%, 0.0035 min-1) and ordinary Cu2MnO4 nanoparticles (21.3%, 0.0070 min-1), SCMO/PMS showed excellent trichloroethylene removal (98.8%, 0.1577 min-1). The pivotal role of Cu(III) was determined based on EPR analysis, quenching experiments, chemical probe experiments, hydrogen temperature-programmed reduction and Raman spectroscopy analysis, in-situ FTIR and Raman analyses. In brief, the interaction between PMS and SCMO could produce surface-bonded reactive complexes and the subsequent breaking of O-O bond in the sub-stable structure allowed the conversion of Cu(II) to Cu(III), which in turn facilitates the generation of •OH and SO4•-. The density functional theory (DFT) calculations provided supporting evidence for the electron donor role of SCMO and the increase of the electron acceptance capacity of PMS. SCMO/PMS system showed good resistance and degradation efficiency to complex composition and combined pollutants in actually contaminated groundwater, respectively. However, the coexistence of high concentrations of arsenic could significantly affect SCMO performance due to their adsorption on -OH groups, which still need in-depth study.

Amphichdiral enhancement on singlet oxygen generation and stable thallium immobilization using iron-driven copper oxide

Thallium (Tl) as a prominent priority contaminant in aquatic environment necessitates rigorous regulation. However, limited horizon devotes the impact of selective oxidation on the process of thallium purification. In this study, selective active radical of singlet oxygen (1O2) was continually generated for Tl(Ⅰ) oxidation accomplished with efficient Tl(Ⅲ) immobilization using iron-driven copper oxide (CuFe)/peroxymonosulfate (PMS). Fe-doping changed the active center of electronic structure for enhancing the catalytic and adsorptive reactivities, and installed magnetism for solid-liquid separation. Rapid reaction rate (0.253 min-1) coupled with vigorous elimination efficiency (98.32%) relied on electrostatic attraction, surface complexation, and H-bond interaction. EPR and XPS analyses demonstrated that the synergistic effects of ≡ Cu(Ⅰ)/≡Cu(Ⅱ) and ≡ Fe(Ⅲ)/≡Fe(Ⅱ) redounded to the sustained generation of 1O2 through the pathway of PMS → •O2- → 1O2, and 1O2 exploited an advantage to selectively oxidize Tl(Ⅰ) to Tl(Ⅲ). 3D isosurface cubic charts revealed that the immobilizing ability of Tl(Ⅲ) hydrate for CuFe was notably superior to that of Tl(Ⅲ) hydrate for CuO and Tl(Ⅰ) hydrate for CuO/CuFe, which further attested surface reactivity promoted stable immobilization form. This work develops the continuous generation of 1O2 and stable immobilization with the goal of efficiently cleansing Tl-containing wastewater.

Conjugated Microporous Polymers-Based Catalytic Membranes with Hierarchical Channels for High-Throughput Removal of Micropollutants

Engineering a catalytic membrane capable of efficiently removing emerging organic microcontaminants under ultrahigh flux conditions is of significance for water purification. Herein, drawing inspiration from the functional attributes of lymphatic vessels involved in immunosurveillance and fluid transport with minimal energy consumption, a novel hierarchical porous catalytic membrane is engineered. This membrane, based on an innovative nitrogen-rich conjugated microporous polymer (polytripheneamine, PTPA), is synthesized using an electrospinning coupled in situ polymerization approach. The resulting bioinspired membrane with hierarchical channels comprises a thin layer (≈1.7 µm) of crosslinked PTPA nanoparticles covering the interconnected electrospun nanofibers. This unique design creates an intrinsic microporous angstrom-confined system capable of activating peroxymonosulfate (PMS) to generate 98.7% singlet oxygen (1O2), enabling durable and highly efficient degradation of microcontaminants. Additionally, the presence of a thin layer of mesoporous structure between PTPA nanoparticles and macroporous channels within the interwoven nanofibers enhances mass transfer efficiency and facilitates high flux rates. Notably, the prepared hierarchical porous organic catalytic membrane demonstrates enduring high-efficiency degradation performance with a superior permeance (>95% and >2500 L m-2 h-1 bar-1) sustained over 100 h. This work introduces an innovative pathway for the design of high-performance catalytic membranes for the removal of emerging organic microcontaminants.

Asymmetrically Coordinated Mn-S1N3 Configuration Induces Localized Electric Field-Driven Peroxymonosulfate Activation for Remarkably Efficient Generation of 1O2

Singlet oxygen (1O2) species generated in peroxymonosulfate (PMS)-based advanced oxidation processes offer opportunities to overcome the low efficiency and secondary pollution limitations of existing AOPs, but efficient production of 1O2 via tuning the coordination environment of metal active sites remains challenging due to insufficient understanding of their catalytic mechanisms. Herein, an asymmetrical configuration characterized by a manganese single atom coordinated is established with one S atom and three N atoms (denoted as Mn-S1N3), which offer a strong local electric field to promote the cleavage of O─H and S─O bonds, serving as the crucial driver of its high 1O2 production. Strikingly, an enhanced the local electric field caused by the dynamic inter-transformation of the Mn coordination structure (Mn-S1N3 ↔ Mn-N3) can further downshift the 1O2 production energy barrier. Mn-S1N3 demonstrates 100% selective product 1O2 by activation of PMS at unprecedented utilization efficiency, and efficiently oxidize electron-rich pollutants. This work provides an atomic-level understanding of the catalytic selectivity and is expected to guide the design of smart 1O2-AOPs catalysts for more selective and efficient decontamination applications.

Correlating active sites and oxidative species in single-atom catalyzed Fenton-like reactions

Single-atom catalysts (SACs) have gained widespread popularity in heterogeneous catalysis-based advanced oxidation processes (AOPs), owing to their optimal metal atom utilization efficiency and excellent recyclability by triggering reactive oxidative species (ROS) for target pollutant oxidation in water. Systematic summaries regarding the correlation between the active sites, catalytic activity, and reactive species of SACs have rarely been reported. This review provides an overview of the catalytic performance of carbon- and metal oxide-supported SACs in Fenton-like reactions, as well as the different oxidation pathways induced by the metal and non-metal active sites, including radical-based pathways (e.g., ·OH and SO4˙-) and nonradical-based pathways (e.g. 1O2, high-valent metal-oxo species, and direct electron transfer). Thereafter, we discuss the effects of metal types, coordination environments, and spin states on the overall catalytic performance and the generated ROS in Fenton-like reactions. Additionally, we provide a perspective on the future challenges and prospects for SACs in water purification.

Selective Photoreforming of Waste Plastics into Diesel Olefins via Single Reactive Oxygen Species

The accumulation of plastic waste poses a pressing environmental challenge. Catalytic conversion stands out as an ideal approach for plastics upcycling, particularly through solar-driven plastics photoreforming. However, due to the common effects of multiple reactive oxygen species (ROS), selectively generating high-value chemicals becomes challenging. In this study, we developed a universal strategy to achieve >85 % selective production of diesel olefins (C15-C28) from polyolefin waste plastics via single ROS. Using tetrakis (4-carboxyphenyl) porphyrin supramolecular (TCPP) with different central metals as an example to regulate single ROS generation, results show Ni-TCPP facilitates triplet exciton production, yielding 1O2, while Zn-TCPP generates ⋅O2 - due to its strong built-in electric field (IEF). 1O2 directly dechlorinates polyvinyl chloride (PVC) due to the electro-negativity of chlorine atoms and the low dissociation energy of C-Cl bonds, while ⋅O2 - promotes direct dehydrogenation of polyethylene (PE) due to the electro-positivity of hydrogen atoms and the high dissociation energy of C-H bonds. This method is universally applicable to various single ROS systems. Installation experiments further affirm the application potential, achieving the highest diesel olefin production of 76.1 μmol h-1. Such a universally adaptive approach holds promise for addressing the global plastic pollution problem.

Lattice-Confined Single-Atom Catalyst: Preparation, Application and Electron Regulation Mechanism

Lattice-confined single-atom catalyst (LC SAC), featuring exceptional activity, intriguing stability and prominent selectivity, has attracted extensive attention in the fields of various reactions (e.g., hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), etc.). To design a "smart" LC SAC for catalytic applications, one must systematically comprehend updated advances in the preparation, the application, and especially the peculiar electron regulation mechanism of LC SAC. In this review, the specific preparation methods of LC SAC based on general coordination strategy are updated, and its applications in HER, OER, ORR, N2 reduction reaction (NRR), advanced oxidation processes (AOPs) and so forth are summarized to display outstanding activity, stability and selectivity. Uniquely, the electron regulation mechanisms are first and deeply discussed and can be primarily categorized as electron transfer bridge with monometallic active sites, novel catalytic centers with polymetallic active sites, and positive influence by surrounding environments. In the end, the existing issues and future development directions are put forward with a view to further optimize the performance of LC SAC. This review is expected to contribute to the in-depth understanding and practical application of highly efficient LC SAC.

Tuning electronic structure of metal-free dual-site catalyst enables exclusive singlet oxygen production and in-situ utilization

Developing eco-friendly catalysts for effective water purification with minimal oxidant use is imperative. Herein, we present a metal-free and nitrogen/fluorine dual-site catalyst, enhancing the selectivity and utilization of singlet oxygen (1O2) for water decontamination. Advanced theoretical simulations reveal that synergistic fluorine-nitrogen interactions modulate electron distribution and polarization, creating asymmetric surface electron configurations and electron-deficient nitrogen vacancies. These properties trigger the selective generation of 1O2 from peroxymonosulfate (PMS) and improve the utilization of neighboring reactive oxygen species, facilitated by contaminant enrichment at the fluorine-carbon Lewis-acid adsorption sites. Utilizing these insights, we synthesize the catalyst through montmorillonite (MMT)-assisted pyrolysis (NFC/M). This method leverages the role of MMT as an in-situ layer-stacked template, enabling controlled decomposition of carbon, nitrogen, and fluorine precursors and resulting in a catalyst with enhanced structural adaptability, reactive site accessibility, and mass-transfer capacity. The NFC/M demonstrates an impressive 290.5-fold increase in phenol degradation efficiency than the single-site analogs, outperforming most of metal-based catalysts. This work not only underscores the potential of precise electronic and structural manipulations in catalyst design but also advances the development of efficient and sustainable solutions for water purification.

Single Atom Catalyst in Persulfate Oxidation Reaction: From Atom Species to Substance

With maximum utilization of active metal sites, more and more researchers have reported using single atom catalysts (SACs) to activate persulfate (PS) for organic pollutants removal. In SACs, single metal atoms (Fe, Co, Cu, Mn, etc.) and different substrates (porous carbon, biochar, graphene oxide, carbon nitride, MOF, MoS2, and others) are the basic structural. Metal single atoms, substances, and connected chemical bonds all have a great influence on the electronic structures that directly affect the activation process of PS and degradation efficiency to organic pollutants. However, there are few relevant reviews about the interaction between metal single atoms and substances during PS activation process. In this review, the SACs with different metal species and substrates are summarized to investigate the metal-support interaction and evaluate their effects on PS oxidation reaction process. Furthermore, how metal atoms and substrates affect the reactive species and degradation pathways are also discussed. Finally, the challenges and prospects of SACs in PS-AOPs are proposed.

Anchored Cobalt Nanoparticles on Layered Perovskites for Rapid Peroxymonosulfate Activation in Antibiotic Degradation

In the Fenton-like reaction, revealing the dynamic evolution of the active sites is crucial to achieve the activity improvement and stability of the catalyst. This study reports a perovskite oxide in which atomic (Co0) in situ embedded exsolution occurs during the high-temperature phase transition. This unique anchoring strategy significantly improves the Co3+/Co2+ cycling efficiency at the interface and inhibits metal leaching during peroxymonosulfate (PMS) activation. The Co@L-PBMC catalyst exhibits superior PMS activation ability and could achieve 99% degradation of tetracycline within 5 min. The combination of experimental characterization and density functional theory (DFT) calculations elucidates that the electron-deficient oxygen vacancy accepts an electron from the Co 3d-orbital, resulting in a significant electron delocalization of the Co site, thereby facilitating the adsorption of the *HSO5/*OH intermediate onto the "metal-VO bridge" structure. This work provides insights into the PMS activation mechanism at the atomic level, which will guide the rational design of next-generation catalysts for environmental remediation.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.