Insight into Structural Evolution, Active Site and Stability of Heterogeneous Electrocatalysts

Visualizing Surface-Subsurface Cu Atom Exchange at the FeO/Pt(111) Surface Induced by CO Adsorption at 150 K

Structural evolution of solid catalyst surfaces induced by direct exposure to reaction gas has been extensively studied and is well understood. However, whether and how subsurface atomic structures are affected by the reaction atmosphere require further exploration. In this work, our results confirm that Cu clusters supported on FeO/Pt(111) (Cun/FeO/Pt) transform into surface CuCO complexes (CuCO/FeO/Pt) with exposure to CO at 78 K. Surprisingly, Cu clusters on Pt(111) buried under monolayer FeO film (FeO/Cun/Pt) can also transform into surface CuCO complexes on FeO/Pt(111) upon CO adsorption at 150 K. The place exchange of surface and subsurface Cu atoms at the FeO/Pt(111) surface can be mediated by exposing to CO at 150 K and keeping in ultrahigh vacuum at 300 K, alternatively. Calculation results reveal that CO adsorption induces restructuring of the FeO film above the Cu clusters, generating a diffusion channel for Cu atoms to pass through the FeO film and form surface CuCO, while Cu atoms remaining at the FeO-Pt interface are more thermodynamically favored without CO. Our work suggests that buried subsurface atoms may be involved in strong restructuring processes driven by reaction gas, which could strongly influence the catalytic performance.

Single Entity Electrocatalysis

Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.

Sustainable Gas Storage: CO2 Activation of Edge-Functionalized Graphitic Nanoplatelets

Graphitic nanoplatelets (GnPs), edge-selectively carboxylated graphitic nanoplatelets (ECGnPs), are functionalized with a carboxylic acid at the edge increasing their surface area, and are highly dispersible in various solvents. However, there is a limit in that the basal plane remains intact because it is functionalized only in the part where the radical is generated at the edge. Here, we activate ECGnPs to have porous structures by flowing CO2 at 900 °C. Etching of the ECGnPs structure was performed through the Boudouard reaction, and the surface area increased from 579 m2 g-1 to a maximum of 2462 m2 g-1. In addition, the pore structure was investigated with various adsorption gases (CH4, Ar, CO2, H2, and N2) according to the reaction time. This study provides the overall green chemistry in that it utilizes CO2 from manufacturing to activation compared to the process of activating with conventional chemical treatment.

Nickel Hydroxide-Based Electrocatalysts for Promising Electrochemical Oxidation Reactions: Beyond Water Oxidation

Transition metal hydroxides have attracted significant research interest for their energy storage and conversion technique applications. In particular, nickel hydroxide (Ni(OH)2), with increasing significance, is extensively used in material science and engineering. The past decades have witnessed the flourishing of Ni(OH)2-based materials as efficient electrocatalysts for water oxidation, which is a critical catalytic reaction for sustainable technologies, such as water electrolysis, fuel cells, CO2 reduction, and metal-air batteries. Coupling the electrochemical oxidation of small molecules to replace water oxidation at the anode is confirmed as an effective and promising strategy for realizing the energy-saving production. The physicochemical properties of Ni(OH)2 related to conventional water oxidation are first presented in this review. Then, recent progress based on Ni(OH)2 materials for these promising electrochemical reactions is symmetrically categorized and reviewed. Significant emphasis is placed on establishing the structure-activity relationship and disclosing the reaction mechanism. Emerging material design strategies for novel electrocatalysts are also highlighted. Finally, the existing challenges and future research directions are presented.

A Coordination-Derived Cerium-Based Amorphous-Crystalline Heterostructure with High Electrocatalytic Oxygen Evolution Activity

The rational design of heterogeneous catalysts is crucial for achieving optimal physicochemical properties and high electrochemical activity. However, the development of new amorphous-crystalline heterostructures is significantly more challenging than that of the existing crystalline-crystalline heterostructures. To overcome these issues, a coordination-assisted strategy that can help fabricate an amorphous NiO/crystalline NiCeOx (a-NiO/c-NiCeOx) heterostructure is reported herein. The coordination geometry of the organic ligands plays a pivotal role in permitting the formation of coordination polymers with high Ni contents. This consequently provides an opportunity for enabling the supersaturation of Ni in the NiCeOx structure during annealing, leading to the endogenous spillover of Ni from the depths of NiCeOx to its surface. The resulting heterostructure, featuring strongly coupled amorphous NiO and crystalline NiCeOx, exhibits harmonious interactions in addition to low overpotentials and high catalytic stability in the oxygen evolution reaction (OER). Theoretical calculations prove that the amorphous-crystalline interfaces facilitate charge transfer, which plays a critical role in regulating the local electron density of the Ni sites, thereby promoting the adsorption of oxygen-based intermediates on the Ni sites and lowering the dissociation-related energy barriers. Overall, this study underscores the potential of coordinating different metal ions at the molecular level to advance amorphous-crystalline heterostructure design.

Constructing built-in electric field in oxygen vacancies-enriched Fe3O4-FeSe2 heterojunctions supported on reduced graphene oxide for efficient overall water splitting

Combining interfacial oxygen vacancy engineering with a built-in electric field (BEF) technique is an efficient way to build efficient and practical electrocatalytic water-splitting catalysts. In this study, a Fe3O4-FeSe2 heterojunction catalyst with oxygen vacancies supported on reduced graphene oxide (rGO) was designed and successfully fabricated using a simple two-step hydrothermal method. Owing to the different Fermi levels of Fe3O4 and FeSe2, a BEF was generated at the interface, which enhanced the separation of negative and positive charges, thus optimizing the adsorption of hydrogen/oxygen intermediates on the heterostructures and improving the activity of the catalyst. Experimental results show that Fe3O4-FeSe2/rGO/NF exhibits excellent hydrogen and oxygen evolution performances, with low overpotentials of 234/300 mV at 100 mA⋅cm-2. A water electrolyzer assembled with Fe3O4-FeSe2/rGO/NF as both the anode and cathode requires only a small potential of 1.78 V to reach a current density of 100 mA⋅cm-1. This study provides an innovative approach for constructing a catalyst with excellent electrocatalytic performance for overall water splitting.

Cr-doping promoted surface reconstruction of Ni3N electrocatalysts toward efficient overall water splitting

Understanding and utilizing the dynamic changes of electrocatalysts under working conditions are important for advancing the sustainable hydrogen production. Here, we for the first time report that Cr-doping can promote the in situ reconstruction of a self-supported Ni3N electrocatalyst (Cr-Ni3N/NF) during oxygen and hydrogen evolution reactions (OER and HER), and therefore improve the electrocatalytic water splitting performance. As identified by in situ measurements and theoretical calculations, Cr-doping enhances OH- adsorption during OER at anode and thereby boosts the transformation of Ni3N pre-catalysts to defect-rich nickel oxyhydroxide (NiOOH) active species. Meanwhile, it facilitates the generation of Ni3N/Ni(OH)2 at cathodes due to effective H2O activation, leading to the fast HER kinetics on the Ni3N/Ni(OH)2 interfaces. Notably, the optimal Cr-Ni3N/NF displays good OER and HER performance in 1.0 M KOH electrolytes, with low overpotentials of 316 and 188 mV to achieve the current density of ± 100 mA cm-2, respectively. Benefiting from its bi-functionality and self-supporting property, an alkaline electrolyzer equipped with Cr-Ni3N/NF as both anode and cathode affords a small voltage of 1.72 V at 100 mA cm-2, along with 100 h operation stability. Elucidating that Cr-doping can boost in situ reconfiguration and consequently the electrocatalytic activity, this work would shed new light on the rational design and synthesis of electrocatalysts via directional reconstructions.

Advancements in Rechargeable Zn-Air Batteries with Transition-Metal Dichalcogenides as Bifunctional Electrocatalyst

This review covers recent progress on transition metal dichalcogenides (TMDs) as bifunctional electrocatalysts for Zinc-air batteries (ZABs), emphasizing their suitable surface area, electrocatalytic active sites, stability in acidic/basic environments, and tunable electronic properties. It discusses strategies like defect engineering, doping, interface, and structural modifications of TMDs nanostructures for enhancing the performances of ZABs. Zinc-air batteries are promising energy storage devices owing to their high energy density, low cost, and environmental friendliness. However, the development of durable and efficient bifunctional electrocatalysts is a major concern for Zn-air batteries. In this review, we summarize the recent progress on transition metal dichalcogenides (TMDs) as bifunctional electrocatalysts for Zn-air batteries. We discuss the advantages of TMDs, such as high activity, good stability, and tunable electronic structure, as well as the challenges, such as low conductivity, poor durability, and limited active sites. We also highlight the strategies for fine-tuning the properties of TMDs, such as defect engineering, doping, hybridization, and structural engineering, to enhance their catalytic performance and stability. We provide a comprehensive and in-depth analysis of the applications of TMDs in Zn-air batteries, demonstrating their potential as low-cost, abundant, and environmentally friendly alternatives to noble metal catalysts. We also suggest future directions like exploring new TMDs materials and compositions, developing novel synthesis and modification techniques, investigating the interfacial interactions and charge transfer processes, and integrating TMDs with other functional materials. This review aims to illuminate the path forward for the development of efficient and durable Zn-air batteries, aligning with the broader objectives of sustainable energy solutions.

Recent Developments in Nickel-Based Layered Double Hydroxides for Photo(-/)electrocatalytic Water Oxidation

Layered double hydroxides (LDHs), especially those containing nickel (Ni), are increasingly recognized for their potential in photo(-/)electrocatalytic water oxidation due to the abundant availability of Ni, their corrosion resistance, and their minimal toxicity. This review provides a comprehensive examination of Ni-based LDHs in electrocatalytic (EC), photocatalytic (PC), and photoelectrocatalytic (PEC) water oxidation processes. The review delves into the operational principles, highlighting similarities and distinctions as well as the benefits and limitations associated with each method of water oxidation. It includes a detailed discussion on the synthesis of monolayer, ultrathin, and bulk Ni-based LDHs, focusing on the merits and drawbacks inherent to each synthesis approach. Regarding the EC oxygen evolution reaction (OER), strategies to improve catalytic performance and insights into the structural evolution of Ni-based LDHs during the electrocatalytic process are summarized. Furthermore, the review extensively covers the advancements in Ni-based LDHs for PEC OER, including an analysis of semiconductors paired with Ni-based LDHs to form photoanodes, with a focus on their enhanced activity, stability, and underlying mechanisms facilitated by LDHs. The review concludes by addressing the challenges and prospects in the development of innovative Ni-based LDH catalysts for practical applications. The comprehensive insights provided in this paper will not only stimulate further research but also engage the scientific community, thus driving the field of photo(-/)electrocatalytic water oxidation forward.

Built-In Electric Field Boosted Overall Water Electrolysis at Large Current Density for the Heterogeneous Ir/CoMoO4 Nanosheet Arrays

Advanced bifunctional electrocatalysts are essential for propelling overall water splitting (OWS) progress. Herein, relying on the obvious difference in the work function of Ir (5.44 eV) and CoMoO4 (4.03 eV) and the constructed built-in electric field (BEF), an Ir/CoMoO4/NF heterogeneous catalyst, with ultrafine Ir nanoclusters (1.8 ± 0.2 nm) embedded in CoMoO4 nanosheet arrays on the surface of nickel foam skeleton, is reported. Impressively, the Ir/CoMoO4/NF shows remarkable electrocatalytic bifunctionality toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), especially at large current densities, requiring only 13 and 166 mV to deliver 10 and 1000 mA cm-2 for HER and 196 and 318 mV for OER. Furthermore, the Ir/CoMoO4/NF||Ir/CoMoO4/NF electrolyzer demands only 1.43 and 1.81 V to drive 10 and 1000 mA cm-2 for OWS. Systematical theoretical calculations and tests show that the formed BEF not only optimizes interfacial charge distribution and the Fermi level of both Ir and CoMoO4, but also reduces the Gibbs free energy (ΔGH*, from 0.25 to 0.03 eV) and activation energy (from 13.6 to 8.9 kJ mol-1) of HER, the energy barrier (from 3.47 to 1.56 eV) and activation energy (from 21.1 to 13.9 kJ mol-1) of OER, thereby contributing to the glorious electrocatalytic bifunctionality.

Electronic redistribution through the interface of MnCo2O4-Ni3N nano-urchins prompts rapid In situ phase transformation for enhanced oxygen evolution reaction

One of the most coveted objectives in the realm of energy conversion technologies is the development of highly efficient and economically viable electrocatalysts for the oxygen evolution reaction. The commercialization of such techniques has thus far been impeded by their slow response kinetics. One of the many ways to develop highly effective electrocatalysts is to judiciously choose a coupling interface that maximizes catalyst performance. In this study, the in situ electrochemical phase transformation of MnCo2O4-Ni3N into MnCo2O4-NiOOH is described. The catalyst has an exceptional overpotential of 224 mV to drive a current density of 10 mA cm-2. Strong interfacial contact is seen in the MnCo2O4-Ni3N catalyst, leading to a considerable electronic redistribution between the MnCo2O4 and Ni3N phases. This causes an increase in the valence state of Ni, which makes it an active site for the adsorption of *OH, O*, and *OOH (intermediates). This charge transfer facilitates the rapid phase transformation to form NiOOH from Ni3N. At a higher current density of 300 mA cm-2, the catalyst remained stable for a period of 140 h. DFT studies also revealed that the in situ-formed NiOOH on the MnCo2O4 surface results in superior OER kinetics compared to that of NiOOH alone.

Constructing Bipolar Dual-Active Sites through High-Entropy-Induced Electric Dipole Transition for Decoupling Oxygen Redox

It remains a significant challenge to construct active sites to break the trade-off between oxidation and reduction processes occurring in battery cathodes with conversion mechanism, especially for the oxygen reduction and evolution reactions (ORR/OER) involved in the zinc-air batteries (ZABs). Here, using a high-entropy-driven electric dipole transition strategy to activate and stabilize the tetrahedral sites is proposed, while enhancing the activity of octahedral sites through orbital hybridization in a FeCoNiMnCrO spinel oxide, thus constructing bipolar dual-active sites with high-low valence states, which can effectively decouple ORR/OER. The FeCoNiMnCrO high-entropy spinel oxide with severe lattice distortion, exhibits a strong 1s→4s electric dipole transition and intense t2g(Co)/eg(Ni)-2p(OL) orbital hybridization that regulates the electronic descriptors, eg and t2g, which leads to the formation of low-valence Co tetrahedral sites (Coth) and high-valence Ni octahedral sites (Nioh), resulting in a higher half-wave potential of 0.87 V on Coth sites and a lower overpotential of 0.26 V at 10 mA cm-2 on Nioh sites as well as a superior performance of ZABs compared to low/mild entropy spinel oxides. Therefore, entropy engineering presents a distinctive approach for designing catalytic sites by inducing novel electromagnetic properties in materials across various electrocatalytic reactions, particularly for decoupling systems.

Fe,Ni-Based Metal-Organic Frameworks Embedded in Nanoporous Nitrogen-Doped Graphene as a Highly Efficient Electrocatalyst for the Oxygen Evolution Reaction

The quest for economically sustainable electrocatalysts to replace critical materials in anodes for the oxygen evolution reaction (OER) is a key goal in electrochemical conversion technologies, and, in this context, metal-organic frameworks (MOFs) offer great promise as alternative electroactive materials. In this study, a series of nanostructured electrocatalysts was successfully synthesized by growing tailored Ni-Fe-based MOFs on nitrogen-doped graphene, creating composite systems named MIL-NG-n. Their growth was tuned using a molecular modulator, revealing a non-trivial trend of the properties as a function of the modulator quantity. The most active material displayed an excellent OER performance characterized by a potential of 1.47 V (vs. RHE) to reach 10 mA cm-2, a low Tafel slope (42 mV dec-1), and a stability exceeding 18 h in 0.1 M KOH. This outstanding performance was attributed to the synergistic effect between the unique MOF architecture and N-doped graphene, enhancing the amount of active sites and the electron transfer. Compared to a simple mixture of MOFs and N-doped graphene or the deposition of Fe and Ni atoms on the N-doped graphene, these hybrid materials demonstrated a clearly superior OER performance.

Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms

Rechargeable metal-sulfur batteries are considered promising candidates for energy storage due to their high energy density along with high natural abundance and low cost of raw materials. However, they could not yet be practically implemented due to several key challenges: (i) poor conductivity of sulfur and the discharge product metal sulfide, causing sluggish redox kinetics, (ii) polysulfide shuttling, and (iii) parasitic side reactions between the electrolyte and the metal anode. To overcome these obstacles, numerous strategies have been explored, including modifications to the cathode, anode, electrolyte, and binder. In this review, the fundamental principles and challenges of metal-sulfur batteries are first discussed. Second, the latest research on metal-sulfur batteries is presented and discussed, covering their material design, synthesis methods, and electrochemical performances. Third, emerging advanced characterization techniques that reveal the working mechanisms of metal-sulfur batteries are highlighted. Finally, the possible future research directions for the practical applications of metal-sulfur batteries are discussed. This comprehensive review aims to provide experimental strategies and theoretical guidance for designing and understanding the intricacies of metal-sulfur batteries; thus, it can illuminate promising pathways for progressing high-energy-density metal-sulfur battery systems.

Identifying the Active Sites in MoSi2@MoO3 Heterojunctions for Enhanced Hydrogen Evolution

Developing Two-dimensional (2D) Mo-based heterogeneous nanomaterials is of great significance for energy conversion, especially in alkaline hydrogen evolution reaction (HER), however, it remains a challenge to identify the active sites at the interface due to the structure complexity. Herein, the real active sites are systematically explored during the HER process in varied Mo-based 2D materials by theoretical computational and magnetron sputtering approaches first to filtrate the candidates, then successfully combined the MoSi2 and MoO3 together through Oxygen doping to construct heterojunctions. Benefiting from the synergistic effects between the MoSi2 and MoO3, the obtained MoSi2@MoO3 exhibits an unprecedented overpotential of 72 mV at a current density of 10 mA cm-2. Density functional theory calculations uncover the different Gibbs free energy of hydrogen adsorption (ΔGH*) values achieved at the interfaces with different sites as adsorption sites. The results can facilitate the optimization of heterojunction electrocatalyst design principles for the Mo-based 2D materials.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Zeolitic Imidazolate-Framework-Engineered Heterointerface Catalysis for the Construction of Plant-Wearable Sensors

Plant-wearable sensors provide real-time information that enables pesticide inputs to be finely tuned and play critical roles in precision agriculture. However, tracking pesticide information in living plants remains a formidable challenge owing to inadequate shape adaptabilities and low in-field sensor sensitivities. In this study, plant-wearable hydrogel discs are designed by embedding a dual-shelled upconversion-nanoparticles@zeolitic-imidazolate-framework@polydopamine (UCNPs@ZIF@PDA) composite in double-network hydrogels to deliver on-site pesticide-residue information. Benefiting from the enzyme-mimetic catalytic activity of ZIFs and enzyme triggered-responsive property of PDA shell, the hydrogel discs are endowed with high sensing sensitivity toward 2,4-dichlorophenoxyacetic acid pesticide at the nanogram per milliliter level via boosting fluorescence quenching efficiency. Notably, hydrogel discs mounted on tomato plants exhibit sufficient adaptability to profile dynamic pesticide degradation when used in conjunction with an ImageJ processing algorithm, which is practically applicable. Such hydrogel discs form a noninvasive and low-cost toolkit for the on-site acquisition of pesticide information, thereby contributing to the precise management of the health status of a plant and the judicious development of precision agriculture.

Alkyl sulfonate surfactant mediates electroreduction of carbon dioxide to ethylene or ethanol over hydroxide-derived copper catalysts

For CO2 electroreduction (CO2ER) to C2 compounds, it is generally accepted that the formation of ethylene and ethanol shares the same intermediate, *HCCOH. The majority of studies have achieved high faradaic efficiency (FE) towards ethylene, but faced challenges to get high ethanol FE. Herein, we present an alkyl sulfonate surfactant (e.g., sodium dodecyl sulfonate, SDS) mediated CO2ER to a C2 product over an in situ generated Cu catalyst (Cu@SDS) from SDS-modified Cu(OH)2. It achieves the CO2ER to ethylene as the sole C2 product at low applied voltages with a FE of 55% at -0.6 V vs. RHE and to ethanol as the main product at potentials ≥0.7 V with a maximum FE of 64% and a total C2 FE of 86% at -0.8 V, with a current density of 231 mA cm-2 in a flow cell. Mechanism investigation indicates that SDS modifies the oxidation state of the in situ formed Cu species in Cu@SDS, thus tuning the catalyst activity for CO2ER and lowering the C-C coupling energy barrier; meanwhile, it tunes the adsorption mode of the *HCCOH intermediates on the catalyst, thus mediating the selectivity of CO2ER towards C2 products.

First-Principles Insights into Tungsten Semicarbide-Based Single-Atom Catalysts: Single-Atom Migration and Mechanisms in Oxygen Reduction

Understanding the structural evolution of single-atom catalysts (SACs) in catalytic reactions is crucial for unraveling their catalytic mechanisms. In this study, we utilize density functional theory calculations to delve into the active phase evolution and the oxygen reduction reaction (ORR) mechanism of tungsten semicarbide-based transition metal SACs (TM1/W2C). The stable crystal phases and optimal surface exposures of W2C are identified by using ab initio atomistic thermodynamics simulations. Focusing on the W-terminated (001) surface, we screen 13 stable TM1/W2C variants, ultimately selecting Pt1/W2C(001) as our primary model. The surface Pourbaix diagram, mapped for this model under ORR conditions, reveals dynamic Pt1 migration on the surface, triggered by surface oxidation. This discovery suggests a novel single-atom evolution pathway. Remarkably, this single-atom migration behavior is also discerned in seven other group VIII SACs, enhancing both their catalytic activity and their stability. Our findings offer insights into the evolution of active phases in SACs, considering substrate structural arrangement, single-atom incorporation, and self-optimization of catalysts under various conditions.

Organic Thin Films Enable Retaining the Oxidation State of Copper Catalysts during CO2 Electroreduction

A key challenge in electrocatalysis remains controlling a catalyst's structural, chemical, and electrical properties under reaction conditions. While organic coatings showed promise for enhancing the selectivity and stability of catalysts for CO2 electroreduction (CO2RR), their impact on the chemical state of underlying metal electrodes has remained unclear. In this study, we show that organic thin films on polycrystalline copper (Cu) enable retaining Cu+ species at reducing potentials down to -1.0 V vs RHE, as evidenced by operando Raman and quasi in situ X-ray photoelectron spectroscopy. In situ electrochemical atomic force microscopy revealed the integrity of the porous organic film and nearly unaltered Cu electrode morphology. While the pristine thin film enhances the CO2-to-ethylene conversion, the addition of organic modifiers into electrolytes gives rise to improved CO2RR performance stability. Our findings showcase hybrid metal-organic systems as a versatile approach to control, beyond morphology and local environment, the oxidation states of catalysts and energy conversion materials.

Strategically Designed Pd-Induced Changes in Alkaline Hydrogen Evolution Reaction and Oxygen Evolution Reaction Performances of Electrochemical Water Oxidation by the Galvanically Synthesized MoO2/MoO3 Composite Thin Film

Electrochemical water oxidation is believed to be an effective pathway to produce clean, carbon-free, and environmentally sustainable green energy. In this work, we report a simple, easy-to-construct, facile, low-cost, and single-step galvanic technique to synthesize a Pd-supported temperature-assisted MoOx thin film nanocomposite for effective water oxidation. The most suitable nanocomposite exhibits very low overpotential at 10 mA/cm2 with smaller Tafel slope values for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) processes in an alkaline medium. The formation of a metal oxide-metal junction accelerates the growth of more active sites, promoting induced electronic synergism at the MoOx-Pd interface. This endows higher electrical conductivity and faster electron transfer kinetics, thus accelerating the faster water dissociation reaction following the Tafel-Volmer mechanism to boost the HER process in an alkaline medium. The excellent electrochemical HER and OER performances of our electrocatalyst even supersede the accomplishments of the benchmark catalysts Pt/C and RuO2. Moreover, neither of these two catalysts demonstrates both catalytic reactions, i.e., HER and OER at the same time, which have been observed for our synthesized catalyst. Our findings illustrate the potential of a thin-film MoOx-Pd nanocomposite to be an exceedingly effective electrocatalyst developed by interface engineering strategies. This also provides insight into designing several other semiconductor composite catalysts using simple synthesis techniques for highly efficient HER/OER processes that could be alternatives to benchmark electrocatalysts for water electrolysis.

A model study of ceria-Pt electrocatalysts: stability, redox properties and hydrogen intercalation

The electrocatalytic properties of advanced metal-oxide catalysts are often related to a synergistic interplay between multiple active catalyst phases. The structure and chemical nature of these active phases are typically established under reaction conditions, i.e. upon interaction of the catalyst with the electrolyte. Here, we present a fundamental surface science (scanning tunneling microscopy, X-ray photoelectron spectroscopy, and low-energy electron diffraction) and electrochemical (cyclic voltammetry) study of CeO2(111) nanoislands on Pt(111) in blank alkaline electrolyte (0.1 M KOH) in a potential window between -0.05 and 0.9 VRHE. We observe a size- and preparation-dependent behavior. Large ceria nanoislands prepared at high temperatures exhibit stable redox behavior with Ce3+/Ce4+ electrooxidation/reduction limited to the surface only. In contrast, ceria nanoislands, smaller than ∼5 nm prepared at a lower temperature, undergo conversion into a fully hydrated phase with Ce3+/Ce4+ redox transitions, which are extended to the subsurface region. While the formation of adsorbed OH species on Pt depends strongly on the ceria coverage, the formation of adsorbed Hads on Pt is independent of the ceria coverage. We assign this observation to intercalation of Hads at the Pt/ceria interface. The intercalated Hads cannot participate in the hydrogen evolution reaction, resulting in the moderation of this reaction by ceria nanoparticles on Pt.

Constructing Nitrogen-Doped Carbon Hierarchy Structure Derived from Metal-Organic Framework as High-Performance ORR Cathode Material for Zn-Air Battery

The development of efficient and low-cost catalysts for cathodic oxygen reduction reaction (ORR) in Zn-air battery (ZAB) is a key factor in reducing costs and achieving industrialization. Here, a novel segregated CoNiPt alloy embedded in N-doped porous carbon with a nanoflowers (NFs)-like hierarchy structure is synthesized through pyrolyzing Hofmann-type metal-organic frameworks (MOFs). The unique hierarchical NFs structure exposes more active sites and facilitates the transportation of reaction intermediates, thus accelerating the reaction kinetics. Impressively, the resulting 15% CoNiPt@C NFs catalyst exhibits outstanding alkaline ORR activity with a half-wave potential of 0.93 V, and its mass activity is 7.5 times higher than that of commercial Pt/C catalyst, surpassing state-of-the-art noble metal-based catalysts. Furthermore, the assembled CoNiPt@C+RuO2 ZAB demonstrates a maximum power density of 172 mW cm-2 , which is superior to that of commercial Pt/C+RuO2 ZAB. Experimental results reveal that the intrinsic ORR mass activity is attributed to the synergistic interaction between oxygen defects and pyrrolic/graphitic N species, which optimizes the adsorption energy of the intermediate species in the ORR process and greatly enhances catalytic activity. This work provides a practical and feasible strategy for synthesizing cost-effective alkaline ORR catalysts by optimizing the electronic structure of MOF-derived catalysts.

Metal-Organic-Framework-Based Nanoarrays for Oxygen Evolution Electrocatalysis

The development of highly active and stable electrode materials for the oxygen evolution reaction (OER) is essential for the widespread application of electrochemical energy conversion systems. In recent years, various metal-organic frameworks (MOFs) with self-supporting array structures have been extensively studied because of their high porosity, abundant metal sites, and flexible and adjustable structures. This review provides an overview of the recent progress in the design, preparation, and applications of MOF-based nanoarrays for the OER, beginning with the introduction of the architectural advantages of the nanoarrays and the characteristics of MOFs. Subsequently, the design principles of robust and efficient MOF-based nanoarrays as OER electrodes are highlighted. Furthermore, detailed discussions focus on the composition, structure, and performance of pristine MOF nanoarrays (MOFNAs) and MOF-based composite nanoarrays. On the one hand, the effects of the two components of MOFs and several modification methods are discussed in detail for MOFNAs. On the other hand, the review emphasizes the use of MOF-based composite nanoarrays composed of MOFs and other nanomaterials, such as oxides, hydroxides, oxyhydroxides, chalcogenides, MOFs, and metal nanoparticles, to guide the rational design of efficient OER electrodes. Finally, perspectives on current challenges, opportunities, and future directions in this research field are provided.

Cu-based catalyst designs in CO2 electroreduction: precise modulation of reaction intermediates for high-value chemical generation

The massive emission of excess greenhouse gases (mainly CO2) have an irreversible impact on the Earth's ecology. Electrocatalytic CO2 reduction (ECR), a technique that utilizes renewable energy sources to create highly reduced chemicals (e.g. C2H4, C2H5OH), has attracted significant attention in the science community. Cu-based catalysts have emerged as promising candidates for ECR, particularly in producing multi-carbon products that hold substantial value in modern industries. The formation of multi-carbon products involves a range of transient intermediates, the behaviour of which critically influences the reaction pathway and product distribution. Consequently, achieving desirable products necessitates precise regulation of these intermediates. This review explores state-of-the-art designs of Cu-based catalysts, classified into three categories based on the different prospects of the intermediates' modulation: heteroatom doping, morphological structure engineering, and local catalytic environment engineering. These catalyst designs enable efficient multi-carbon generation in ECR by effectively modulating reaction intermediates.

Synergistic modulation in a triphasic Ni5P4-Ni2P@Ni3S2 system manifests remarkable overall water splitting

The potential for water splitting electrocatalysts with high efficiency paves the way for a sustainable future in hydrogen energy. However, this task is challenging due to the sluggish kinetics of the oxygen evolution reaction (OER), which has a significant impact on the hydrogen evolution reaction (HER). Herein multi-heterointerface of Ni5P4-Ni2P@Ni3S2 was fabricated by a two-step synthesis procedure that consist the development of Ni5P4-Ni2P nanosheets over nickel foam followed by the electrodeposition of Ni3S2. The HR-TEM analysis shows that the Ni5P4-Ni2P@Ni3S2 nanosheets array provide numerous well-exposed diverse heterointerfaces. The electrochemical investigations conducted on the Ni5P4-Ni2P@Ni3S2 nanosheets for complete water splitting indicate that they possess an overpotential of 73 mV and 230 mV in HER and OER respectively, enabling them to generate a current density of 10 and 50 mA cm-2. The nanosheets also demonstrate Tafel slope values of 95 mV dec-1 and 83 mV dec-1 for HER and OER, respectively. The HER stability of the catalyst was conducted for 45 h using chronoamperometric technique under a current density of 20 mA cm-1, while the stability test for OER was carried out at current densities of 100 and 200 mA cm-1 for 100 h each. Furthermore, in the overall water splitting, the catalyst exhibits a cell voltage of 1.47 V@10 mA cm-2 and displayed a stability operation for 100 h at a current density of 150 mA cm-1.

Developing a class of dual atom materials for multifunctional catalytic reactions

Dual atom catalysts, bridging single atom and metal/alloy nanoparticle catalysts, offer more opportunities to enhance the kinetics and multifunctional performance of oxygen reduction/evolution and hydrogen evolution reactions. However, the rational design of efficient multifunctional dual atom catalysts remains a blind area and is challenging. In this study, we achieved controllable regulation from Co nanoparticles to CoN4 single atoms to Co2N5 dual atoms using an atomization and sintering strategy via an N-stripping and thermal-migrating process. More importantly, this strategy could be extended to the fabrication of 22 distinct dual atom catalysts. In particular, the Co2N5 dual atom with tailored spin states could achieve ideally balanced adsorption/desorption of intermediates, thus realizing superior multifunctional activity. In addition, it endows Zn-air batteries with long-term stability for 800 h, allows water splitting to continuously operate for 1000 h, and can enable solar-powered water splitting systems with uninterrupted large-scale hydrogen production throughout day and night. This universal and scalable strategy provides opportunities for the controlled design of efficient multifunctional dual atom catalysts in energy conversion technologies.

Defect Engineered Metal-Organic Framework with Accelerated Structural Transformation for Efficient Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) have been increasingly applied in oxygen evolution reaction (OER), and the surface of MOFs usually undergoes structural transformation to form metal oxyhydroxides to serve as catalytically active sites. However, the controllable regulation of the reconstruction process of MOFs remains as a great challenge. Here we report a defect engineering strategy to facilitate the structural transformation of MOFs to metal oxyhydroxides during OER with enhanced activity. Defective MOFs (denoted as NiFc'x Fc1-x ) with abundant unsaturated metal sites are constructed by mixing ligands of 1,1'-ferrocene dicarboxylic acid (Fc') and defective ferrocene carboxylic acid (Fc). NiFc'x Fc1-x series are more prone to be transformed to metal oxyhydroxides compared with the non-defective MOFs (NiFc'). Moreover, the as-formed metal oxyhydroxides derived from defective MOFs contain more oxygen vacancies. NiFc'Fc grown on nickel foam exhibits excellent OER catalytic activity with an overpotential of 213 mV at the current density of 100 mA cm-2 , superior to that of undefective NiFc'. Experimental results and theoretical calculations suggest that the abundant oxygen vacancies in the derived metal oxyhydroxides facilitate the adsorption of oxygen-containing intermediates on active centers, thus significantly improving the OER activity.

Atomic high-spin cobalt(II) center for highly selective electrochemical CO reduction to CH3OH

In this work, via engineering the conformation of cobalt active center in cobalt phthalocyanine molecular catalyst, the catalytic efficiency of electrochemical carbon monoxide reduction to methanol can be dramatically tuned. Based on a collection of experimental investigations and density functional theory calculations, it reveals that the electron rearrangement of the Co 3d orbitals of cobalt phthalocyanine from the low-spin state (S = 1/2) to the high-spin state (S = 3/2), induced by molecular conformation change, is responsible for the greatly enhanced CO reduction reaction performance. Operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements disclose accelerated hydrogenation of CORR intermediates, and kinetic isotope effect validates expedited proton-feeding rate over cobalt phthalocyanine with high-spin state. Further natural population analysis and density functional theory calculations demonstrate that the high spin Co2+ can enhance the electron backdonation via the dxz/dyz-2π* bond and weaken the C-O bonding in *CO, promoting hydrogenation of CORR intermediates.

In Situ Formation of CoP/Co3 O4 Heterojunction for Efficient Overall Water Splitting

Electrochemical water splitting is an environmentally friendly and effective energy storage method. However, it is still a huge challenge to prepare non-noble metal based electrocatalysts that possess high activity and long-term durability to realize efficient water splitting. Here, we present a novel method of low-temperature phosphating for preparing CoP/Co3 O4 heterojunction nanowires catalyst on titanium mesh (TM) substrate that can be used for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting. CoP/Co3 O4 @TM heterojunction showed an excellent catalytic performance and long-term durability in 1.0 M KOH electrolyte. The overpotential of CoP/Co3 O4 @TM heterojunction was only 257 mV at 20 mA cm-2 during the OER process, and it could work stably more than 40 h at 1.52 V versus reversible hydrogen electrode (vs. RHE). During the HER process, the overpotential of CoP/Co3 O4 @TM heterojunction was only 98 mV at -10 mA cm-2 . More importantly, when used as anodic and cathodic electrocatalyst, they achieved 10 mA cm-2 at 1.59 V. The Faradaic efficiencies of OER and HER were 98.4 % and 99.4 %, respectively, outperforming Ru/Ir-based noble metal electrocatalysts and other non-noble metal electrocatalysts for overall water splitting.

Synergistic Modulation of Electronic Interaction to Enhance Intrinsic Activity and Conductivity of Fe-Co-Ni Hydroxide Nanotube for Highly Efficient Oxygen Evolution Electrocatalyst

The large-scale hydrogen production and application through electrocatalytic water splitting depends crucially on the development of highly efficient, cost-effective electrocatalysts for oxygen evolution reaction (OER), which, however, remains challenging. Here, a new electrocatalyst of trimetallic Fe-Co-Ni hydroxide (denoted as FeCoNiOx Hy ) with a nanotubular structure is developed through an enhanced Kirkendall process under applied potential. The FeCoNiOx Hy features synergistic electronic interaction between Fe, Co, and Ni, which not only notably increases the intrinsic OER activity of FeCoNiOx Hy by facilitating the formation of *OOH intermediate, but also substantially improves the intrinsic conductivity of FeCoNiOx Hy to facilitate charge transfer and activate catalytic sites through electrocatalyst by promoting the formation of abundant Co3+ . Therefore, FeCoNiOx Hy delivers remarkably accelerated OER kinetics and superior apparent activity, indicated by an ultra-low overpotential potential of 257 mV at a high current density of 200 mA cm-2 . This work is of fundamental and practical significance for synergistic catalysis related to advanced energy conversion materials and technologies.

Ni, Co, Zn, and Cu metal-organic framework-based nanomaterials for electrochemical reduction of CO2: A review

The combustion of fossil fuels has resulted in the amplification of the greenhouse effect, primarily through the release of a substantial quantity of carbon dioxide into the atmosphere. The imperative pursuit of converting CO2 into valuable chemicals through electrochemical techniques has garnered significant attention. Metal-organic frameworks (MOFs) have occured as highly prospective materials for the reduction of CO2, owing to their exceptional attributes including extensive surface area, customizable architectures, pronounced porosity, abundant active sites, and well-distributed metallic nodes. This article commences by elucidating the mechanistic aspects of CO2 reduction, followed by a comprehensive exploration of diverse materials encompassing MOFs based on nickel, cobalt, zinc, and copper for efficient CO2 conversion. Finally, a meticulous discourse encompasses the challenges encountered and the prospects envisioned for the advancement of MOF-based nanomaterials in the realm of electrochemical reduction of CO2.

NaCl template-assisted construction of a CoP-MoP heterostructured electrocatalyst for electrocatalytic nitrogen reduction

The electrocatalytic nitrogen reduction reaction (NRR) to ammonia is a promising technology to store renewable energy and mitigate greenhouse gas emissions. However, it usually suffers from low ammonia yield and selectivity because of the lack of efficient electrocatalysts. Herein, we report that the construction of metal phosphide heterojunctions is an efficient strategy for NRR activity enhancement. A CoP-MoP heterojunction electrocatalyst, which is fabricated by a facile NaCl template-assisted strategy, exhibits a favorable ammonia yield rate of 77.8 μg h-1 mgcat-1 (38.9 μg h-1 cm-2) and a high faradaic efficiency of 11.16% at -0.50 V versus the reversible hydrogen electrode. The high NRR electrocatalytic activity can be attributed to the electronic coupling effects and interfacial synergistic effects of CoP and MoP at the heterojunction interface, which accelerates the electron transfer rate. Moreover, Mo doping changes the d-band centers of metal sites on the CoP surface, which is conducive to N2 adsorption and promotes N2* adsorption in the competition of occupying active sites, thus inhibiting the HER. This work manifests the high potential of phosphide electrocatalysts and opens an alternative route toward NRR electrocatalysis.

Fe1-xNix(PO3)2/Ni2P Heterostructure for Boosting Alkaline Oxygen Evolution Reaction in Fresh Water and Real Seawater at High Current Density

Oxygen evolution reaction (OER) is a limiting reaction for highly efficient water electrolysis. Thus, the development of cost-effective and highly efficient OER catalysts is the key to large-scale water electrolysis for hydrogen production. Herein, by using an interfacial engineering strategy, a unique nanoflower-like Fe1-xNix(PO3)2/Ni2P/NF heterostructure with abundant heterogeneous interfaces is successfully fabricated. The catalyst exhibits excellent OER catalytic activity in alkaline fresh water and alkaline natural seawater at high current densities, which only, respectively, requires overpotentials of 318 and 367 mV to drive 1000 mA cm-2 in fresh water and natural seawater both containing 1 M KOH. Furthermore, Fe1-xNix(PO3)2/Ni2P/NF demonstrates excellent durability, which can basically remain stable for 80 h during the electrocatalytic OER processes, respectively, in alkaline fresh water and natural seawater. This work provides a new construction strategy for designing highly efficient electrocatalysts for OER at high current densities both in alkaline fresh water and in natural seawater.

Enhanced Nitrate-to-Ammonia Efficiency over Linear Assemblies of Copper-Cobalt Nanophases Stabilized by Redox Polymers

Renewable electricity-powered nitrate (NO3 - ) reduction reaction (NO3 RR) offers a net-zero carbon route to the realization of high ammonia (NH3 ) productivity. However, this route suffers from low energy efficiency (EE, with a half-cell EE commonly <36%), since high overpotentials are required to overcome the weak NO3 - binding affinity and sluggish NO3 RR kinetics. To alleviate this, a rational catalyst design strategy that involves the linear assembly of sub-5 nm Cu/Co nanophases into sub-20 nm thick nanoribbons is suggested. The theoretical and experimental studies show that the Cu-Co nanoribbons, similar to enzymes, enable strong NO3 - adsorption and rapid tandem catalysis of NO3 - to NH3 , owing to their richly exposed binary phase boundaries and adjacent Cu-Co sites at sub-5 nm distance. In situ Raman spectroscopy further reveals that at low applied overpotentials, the Cu/Co nanophases are rapidly activated and subsequently stabilized by a specifically designed redox polymer that in situ scavenges intermediately formed highly oxidative nitrogen dioxide (NO2 ). As a result, a stable NO3 RR with a current density of ≈450 mA cm-2 is achieved, a Faradaic efficiency of >97% for the formation of NH3 , and an unprecedented half-cell EE of ≈42%.

Engineering Spin States of Isolated Copper Species in a Metal-Organic Framework Improves Urea Electrosynthesis

The catalytic activities are generally believed to be relevant to the electronic states of their active center, but understanding this relationship is usually difficult. Here, we design two types of catalysts for electrocatalytic urea via a coordination strategy in a metal-organic frameworks: CuIII-HHTP and CuII-HHTP. CuIII-HHTP exhibits an improved urea production rate of 7.78 mmol h-1 g-1 and an enhanced Faradaic efficiency of 23.09% at - 0.6 V vs. reversible hydrogen electrode, in sharp contrast to CuII-HHTP. Isolated CuIII species with S = 0 spin ground state are demonstrated as the active center in CuIII-HHTP, different from CuII with S = 1/2 in CuII-HHTP. We further demonstrate that isolated CuIII with an empty [Formula: see text] orbital in CuIII-HHTP experiences a single-electron migration path with a lower energy barrier in the C-N coupling process, while CuII with a single-spin state ([Formula: see text]) in CuII-HHTP undergoes a two-electron migration pathway.

Unveiling the structural transformation and activity origin of heteroatom-doped carbons for hydrogen evolution

Heteroatom-doped carbon materials have been widely used in many electrocatalytic reduction reactions. Their structure-activity relationships are mainly explored based on the assumption that the doped carbon materials remain stable during electrocatalysis. However, the structural evolution of heteroatom-doped carbon materials is often ignored, and their active origins are still unclear. Herein, taking N-doped graphite flake (N-GP) as the research model, we present the hydrogenation of both N and C atoms and the consequent reconstruction of the carbon skeleton during the hydrogen evolution reaction (HER), accompanied by a remarkable promotion of the HER activity. The N dopants are gradually hydrogenated and almost completely dissolved in the form of ammonia. Theoretical simulations demonstrate that the hydrogenation of the N species leads to the reconstruction of the carbon skeleton from hexagonal to 5,7-topological rings (G5-7) with thermoneutral hydrogen adsorption and easy water dissociation. P-, S-, and Se-doped graphites also show similar removal of doped heteroatoms and the formation of G5-7 rings. Our work unveils the activity origin of heteroatom-doped carbon toward the HER and opens a door to rethinking the structure-performance relationships of carbon-based materials for other electrocatalytic reduction reactions.

Electronically Conductive, Multifunctional Polymer Binder for Highly Active, Stable, and Abundant Composite Electrodes for Oxygen Evolution

The electrolysis of water to form hydrogen and oxygen is a promising method to store renewable energy. This method requires electrodes that convert water into protons, electrons, and oxygen. We report a multifunctional polymer that conducts electrons and ions and may coreact with the electrocatalyst in the oxygen evolution reaction (OER). The electrodes were prepared in two steps from off-the-shelf reagents. They operate with low loadings of abundant catalysts and are among the most active (100 mA cm^-2 at 1.43 V vs RHE (1.41 V, iR-corrected)) and stable electrodes, reported to date under harsh conditions (85 °C, 6 M KOH, 120 h (0.69% loss over the first 14.5 h and then 0.61% loss over 105.5 h)). Control experiments on glassy carbon electrodes showed that the polycarbazole system significantly outperformed a Nafion system of the same catalyst loading. This simple strategy can be applied to other types of electrodes.

Construction of Zn-doped RuO2 nanowires for efficient and stable water oxidation in acidic media

Oxygen evolution reaction catalysts capable of working efficiently in acidic media are highly demanded for the commercialization of proton exchange membrane water electrolysis. Herein, we report a Zn-doped RuO₂ nanowire array electrocatalyst with outstanding catalytic performance for the oxygen evolution reaction under acidic conditions. Overpotentials as low as 173, 304, and 373 mV are achieved at 10, 500, and 1000 mA cm^-2, respectively, with robust stability reaching to 1000 h at 10 mA cm^-2. Experimental and theoretical investigations establish a clear synergistic effect of Zn dopants and oxygen vacancies on regulating the binding configurations of oxygenated adsorbates on the active centers, which then enables an alternative Ru-Zn dual-site oxide path of the reaction. Due to the change of reaction pathways, the energy barrier of rate-determining step is reduced, and the over-oxidation of Ru active sites is alleviated. As a result, the catalytic activity and stability are significantly enhanced.

Lattice Strain Mediated Reversible Reconstruction in CoMoO4·0.69H2O for Intermittent Oxygen Evolution

A heterogeneous interface usually plays a versatile role in modulating catalysis and the durability of hybrid electrocatalysts for oxygen evolution reaction (OER), and its intrinsic mechanism is still in dispute due to an uncertain correlation of initial, intermediate and active phases. In this article, the CoMoO₄·0.69H₂O/Co₃O₄ heterogeneous interface is configured to understand the evolution kinetics of these correlated phases. Due to the chemically and electrochemically "inert" character of Co₃O₄ support, lattice strain with 3.31% tuning magnitude in primary CoMoO₄·0.69H₂O can be inherited after spontaneous dissolution of molybdenum cations in electrolyte, dominating catalytic activity of the reconstructed CoOOH. In situ Raman spectroscopy demonstrates reversible conversion between active CoOOH and amorphous cobalt oxide during OER when positive and negative potentials are sequentially supplied onto hybrid catalysts with favorable strain. Therefore, superior durability with negligible decay after 10 cycles is experimentally identified for intermittent oxygen evolution. Theoretical calculations indicate that appropriate stress within the electrocatalyst could reduce the reaction energy barrier and enhance the OER performance by optimizing the adsorption of intermediates.

In Situ Porousized MoS2 Nano Islands Enhance HER/OER Bifunctional Electrocatalysis

2D molybdenum disulfide (MoS₂ ) is developed as a potential alternative non-precious metal electrocatalyst for energy conversion. It is well known that 2D MoS₂ has three main phases 2H, 1T, and 1T'. However, the most stable 2H-phase shows poor electrocatalysis in its basal plane, compared with its edge sites. In this work, a facile one-step hydrothermal-driven in situ porousizing of MoS₂ into self-supporting nano islands to maximally expose the edges of MoS₂ grains for efficient utilization of the active stable sites at the edges of MoS₂ is reported. The results show that such active, aggregation-free nano islands greatly enhance MoS₂ 's hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) bifunctional electrocatalytic activities. At a low overpotential of 248 and 300 mV, the porous MoS₂ nano islands can generate a current density of 10 mA cm^-2 in HER and OER, which is much better than typical nanosheet morphology. Surprisingly, the porous MoS₂ nano islands even exhibit better performance than the current commercial RuO₂ catalyst in OER. This discovery will be another effective strategy to promote robust 2H-phase, instead of 1T/1T'-phase, MoS₂ to achieve efficient endurable bifunctional HER/OER, which is expected to further replace precious metal catalysts in industry.

Reconstructured Electrocatalysts during Oxygen Evolution Reaction under Alkaline Electrolytes

The development of electrocatalysts with high-efficiency and clear structure-activity relationship towards the sluggish oxygen evolution reaction (OER) is essential for the wide application of water electrolyzers. Recently, the dynamic reconstruction phenomenon of the catalysts' surface structures during the OER process has been discovered. With the help of various advanced ex situ and in situ characterization, it is demonstrated that such surface reconstruction could yield actual active species to catalyze the water oxidation process. However, the attention and studies of potential interaction between reconstructed species and substrate are lacking. This review summarizes the recent development of typical reconstructed electrocatalysts and the substrate effect. First, the advanced characterization for electrocatalytic reconstruction is briefly discussed. Then, typical reconstructed electrocatalysts are comprehensively summarized and the key role of substrate effects during the OER process is emphasized. Finally, the future challenges and perspectives of surface reconstructed catalysts for water electrolysis are discussed.

Accelerating Electrochemical Water Oxidation Activity by Tailoring Morphology and Electronic Structure of Nickel Organic Framework Nanoarrays with a Fe Etching Effect

Fe-mediated nickel organic framework nanoarrays (NiFe-MOFs NAs) on carbon cloth were successfully constructed from ultrathin nanosheets via an etching effect. This strategy also combined the dissolution and coordination effect of acidic ligand (2,6-naphthalenedicarboxylic acid, NDC) to a self-sacrificial template of Ni(OH)₂ NAs. Benefiting from the strong Fe etching effect, dense and thick brick-like Ni-NDC nanoplates were tailored into loose and ultrathin NiFe-NDC nanosheets with abundant squamous nanostructures, which were still tightly attached to carbon cloth. As a consequence, more coordinatively unsaturated metal sites (CUMSs) that served as active centers were exposed to accelerate oxygen production. Meanwhile, the electronic structure of active Ni centers was modulated by the incorporation of Fe atoms. The charge density redistribution between Ni and Fe ultimately optimized the energy barrier of the adsorption/desorption of oxygenated intermediates, promoting the kinetics for water oxidation.

Cation-Tuning Engineering on Metal Oxides for Oxygen Electrocatalysis

Cation-tuning engineering has become a new frontier in altering the electronic structure of electrocatalysts, which has been employed to enhance their electrochemical performance. Significant efforts have been made to promote the electrochemical performance of transition metal-based materials during oxygen electrocatalysis and related energy devices such as Zn-air batteries. Herein, the advantages of cation-tuning engineering, including cation vacancies/defects and cation doping, in the modification of the electronic structure of transition metal oxide catalysts are discussed. Additionally, practical applications of the cation-tuning engineering strategy are reviewed in detail with a special emphasis on oxygen reduction reaction and oxygen evolution reaction. Lastly, challenges and future opportunities in this field are also proposed.

Cationic defect-enriched hydroxides as anodic catalysts for efficient seawater electrolysis

A porous NiFe LDH with abundant cationic defects was synthesized to optimize interactions between active Ni species and adsorbates, exhibiting a highly efficient seawater electrolysis performance.

Corrosion Chemistry of Electrocatalysts

Electrocatalysts are the core components of many sustainable energy conversion technologies that are considered the most potential solution to the worldwide energy and environmental crises. The reliability of structure and composition pledges that electrocatalysts can achieve predictable and stable performance. However, during the electrochemical reaction, electrocatalysts are influenced directly by the applied potential, the electrolyte, and the adsorption/desorption of reactive species, triggering structural and compositional corrosion, which directly affects the catalytic behaviors of electrocatalysts (performance degradation or enhancement) and invalidates the established structure-activity relationship. Therefore, it is necessary to elucidate the corrosion behavior and mechanism of electrocatalysts to formulate targeted corrosion-resistant strategies or use corrosion reconstruction synthesis techniques to guide the preparation of efficient and stable electrocatalysts. Herein, the most recent developments in electrocatalyst corrosion chemistry are outlined, including corrosion mechanisms, mitigation strategies, and corrosion syntheses/reconstructions based on typical materials and important electrocatalytic reactions. Finally, potential opportunities and challenges are also proposed to foresee the possible development in this field. It is believed that this contribution will raise more awareness regarding nanomaterial corrosion chemistry in energy technologies and beyond.

CoFeNiMnZnB as a High-Entropy Metal Boride to Boost the Oxygen Evolution Reaction

High-entropy materials offer numerous advantages as catalysts, including a flexible composition to tune the catalytic activity and selectivity and a large variety of adsorption/reaction sites for multistep or multiple reactions. Herein, we report on the synthesis, properties, and electrocatalytic performance of an amorphous high-entropy boride based on abundant transition metals, CoFeNiMnZnB. This metal boride provides excellent performance toward the oxygen evolution reaction (OER), including a low overpotential of 261 mV at 10 mA cm^-2, a reduced Tafel slope of 56.8 mV dec^-1, and very high stability. The outstanding OER performance of CoFeNiMnZnB is attributed to the synergistic interactions between the different metals, the leaching of Zn ions, the generation of oxygen vacancies, and the in situ formation of an amorphous oxyhydroxide at the CoFeNiMnZnB surface during the OER.

Dynamic Electrochemical Interfaces for Energy Conversion and Storage

Electrochemical energy conversion and storage are central to developing future renewable energy systems. For efficient energy utilization, both the performance and stability of electrochemical systems should be optimized in terms of the electrochemical interface. To achieve this goal, it is imperative to understand how a tailored electrode structure and electrolyte speciation can modify the electrochemical interface structure to improve its properties. However, most approaches describe the electrochemical interface in a static or frozen state. Although a simple static model has long been adopted to describe the electrochemical interface, atomic and molecular level pictures of the interface structure should be represented more dynamically to understand the key interactions. From this perspective, we highlight the importance of understanding the dynamics within an electrochemical interface in the process of designing highly functional and robust energy conversion and storage systems. For this purpose, we explore three unique classes of dynamic electrochemical interfaces: self-healing, active-site-hosted, and redox-mediated interfaces. These three cases of dynamic electrochemical interfaces focusing on active site regeneration collectively suggest that our understanding of electrochemical systems should not be limited to static models but instead expanded toward dynamic ones with close interactions between the electrode surface, dissolved active sites, soluble species, and reactants in the electrolyte. Only when we begin to comprehend the fundamentals of these dynamics through operando analyses can electrochemical conversion and storage systems be advanced to their full potential.

Metal-Organic Framework-Based Nanomaterials for Electrocatalytic Oxygen Evolution

Oxygen evolution reaction (OER) is an energy-determined half-reaction for water splitting and many other energy conversion processes, such as rechargeable metal-air batteries and CO₂ reduction, due to its four-electron sluggish process. To reduce the energy consumption and cost of these advanced technologies, various transition metal-based nanomaterials, like metal oxides/hydroxides, nitride, and phosphide are synthesized. Among these, metal-organic framework (MOF)-based materials are considered as the ideal candidate for the fabrication of efficient OER electrocatalysts owing to their unique physicochemical properties. In this review, the fundamental catalytic mechanisms and key evaluation parameters of OER in acidic and alkaline media are presented first. Then, design strategies for MOF-based OER catalysts and research progress in the study of the structure-performance relationship are summarized. Subsequently, the recent research advances of MOF-based OER electrocatalysts in alkaline, acidic, and neutral electrolytes are overviewed. Finally, current challenges and future opportunities are provided under the frame of materials design, theoretical understanding, advanced characterization techniques, and industrial applications.

Uncovering the Nature of Active Sites during Electrocatalytic Reactions by In Situ Synchrotron-Based Spectroscopic Techniques

Catalysts can effectively accelerate the reaction kinetics process and are recognized as the core to realize the conversion and supply of carbon-free energy. However, the active sites of catalysts, especially nanocatalysts, usually undergo dynamic structural evolution under realistic working conditions, which may be induced by various reaction effects such as the applied voltages, electrolytes, or adsorbed intermediates. Therefore, in-depth and systemic insights into the nature of the active sites involved under the working conditions are prerequisites for correlating structure-performance relationships. However, uncovering and identifying active sites under operation conditions are still formidable scientific and technical challenges, which are severely hindered by the complex physical and chemical processes occurring on the active sites. Meanwhile, complementary and important information could be missed by conducting only the conventionally employed ex situ microscopic and spectroscopic measurements. Accordingly, it is highly desirable for us to develop the ever-increasing in situ synchrotron-based techniques to identify the nature of active sites, which renders the rational design of functional catalysts achievable.In this Account, we elaborately highlight the substantial achievements in cutting-edge in situ X-ray spectroscopy (XAS) techniques by presenting several representative carbon-neutral electrocatalytic examples performed in our group to broadcast the principles and virtues of identifying the active sites and tracing intermediate species during electrocatalytic water splitting and electrocatalytic CO₂ reduction (ECR). Specifically, we believe that the interactions between the active sites and the support as well as the adsorption behaviors of intermediates are considered to be the important factors that govern the performance in the water splitting reaction. Meanwhile, the structural rearrangement of alloy catalysts driven by the cathodic potential significantly governs the activity and selectivity toward ECR. More importantly, the directions and suggestions for addressing the current limitations and pitfalls that we may encounter in the course of executing in situ experiments are also provided. Accordingly, it is necessary to use multiple in situ synchrotron-based techniques to obtain the comprehensive details. Furthermore, bridging the gap between the real energy devices and half-reactions could help us to approach the realistic mechanism. Beyond that, developing the rapid time resolution of in situ XAS will overcome the challenge of timescale mismatch to capture the faster structural kinetics of catalysts. Therefore, this Account is aimed to increase the awareness and appreciation of conducting in situ investigations on energy conversion reactions, which would be a guideline for us to explore catalytic scopes that remain challenging.