N-Doped Carbon Electrocatalyst: Marked ORR Activity in Acidic Media without the Contribution from Metal Sites?

Modulating the Energy Barrier via the Synergism of Cu3P and CoP to Accelerate Kinetics for Bolstering Oxygen Electrocatalysis in Zn-Air Batteries

Modulating the energy barrier of reaction intermediates to surmount sluggish kinetics is an utterly intriguing strategy for amplifying the oxygen reduction reaction. Herein, a Cu3P/CoP hybrid is incorporated on hollow porous N-doped carbon nanospheres via dopamine self-polymerization and high-temperature treatment. The resultant Cu3P/CoP@NC showcases a favorable mass activity of 4.41 mA mg-1 and a kinetic current density of 2.38 mA cm-2. Strikingly, the catalyst endows the aqueous Zn-air battery (ZAB) with a large power density of 209.0 mW cm-2, superb cyclability over 317 h, and promising application prospects in flexible ZAB. Theoretical simulations reveal that Cu functions as a modulator to modify the free energy of intermediates and adsorbs the O2 on the Co sites, hence rushing the reaction kinetics. The open and hydrophilic hollow spherical mesoporous structure provides unimpeded channels for reactant diffusion and electrolyte penetration, whereas the exposed inner and outer surfaces can confer a plethora of accessible actives sites. This research establishes a feasible design concept to tune catalytic activity for non-noble metal materials by construction of a rational nanoframework.

In situ Activation of Molecular Oxygen at Intermetallic Spacing-Optimized Iron Network-Like Sites for Boosting Electrocatalytic Oxygen Reduction

The oxygen reduction reaction (ORR) catalyzed by transition-metal single-atom catalysts (SACs) is promising for practical applications in energy-conversion devices, but great challenges still remain due to the sluggish kinetics of O═O cleavage. Herein, a kind of high-density iron network-like sites catalysts are constructed with optimized intermetallic distances on an amino-functionalized carbon matrix (Fe-HDNSs). Quasi-in situ soft X-ray absorption spectroscopy and in situ synchrotron infrared characterizations demonstrate that the optimized intermetallic distances in Fe-HDNSs can in situ activate the molecular oxygen by fast electron compensation through the hybridized Fe 3d‒O 2p, which efficiently facilitates the cleavage of the O═O bond to *O species and highly suppresses the side reactions for an accelerated kinetics of the 4e- ORR. As a result, the well-designed Fe-HDNSs catalysts exhibit superior performances with a half-wave potential of 0.89 V versus reversible hydrogen electrode (RHE) and a kinetic current density of 72 mA cm-2@0.80 V versus RHE, exceeding most of the noble-metal-free ORR catalysts. This work offers some new insights into the understanding of 4e- ORR kinetics and reaction pathways to boost electrochemical performances of SACs.

Work Function-Guided Electrocatalyst Design

The development of high-performance electrocatalysts for energy conversion reactions is crucial for advancing global energy sustainability. The design of catalysts based on their electronic properties (e.g., work function) has gained significant attention recently. Although numerous reviews on electrocatalysis have been provided, no such reports on work function-guided electrocatalyst design are available. Herein, a comprehensive summary of the latest advancements in work function-guided electrocatalyst design for diverse electrochemical energy applications is provided. This includes the development of work function-based catalytic activity descriptors, and the design of both monolithic and heterostructural catalysts. The measurement of work function is first discussed and the applications of work function-based catalytic activity descriptors for various reactions are fully analyzed. Subsequently, the work function-regulated material-electrolyte interfacial electron transfer (IET) is employed for monolithic catalyst design, and methods for regulating the work function and optimizing the catalytic performance of catalysts are discussed. In addition, key strategies for tuning the work function-governed material-material IET in heterostructural catalyst design are examined. Finally, perspectives on work function determination, work function-based activity descriptors, and catalyst design are put forward to guide future research. This work paves the way to the work function-guided rational design of efficient electrocatalysts for sustainable energy applications.

Self-Assembly Strategy for Constructing Porous Boron and Nitrogen Co-Doped Carbon as an Efficient ORR Electrocatalyst toward Zinc-Air Battery

Carbon nanomaterials doped with N and B could activate nearby carbon atoms to promote charge polarization through the synergistic coupling effect between N and B atoms, thus facilitating adsorption of O2 and weakening O-O bond to enhance oxygen reduction reaction. Herein, a simple and controllable self-assembly strategy is applied to synthesize porous B, N co-doped carbon-based catalysts (BCN-P), which employs the macrocyclic molecule cucurbit[7]uril (CB7) as nitrogen source, and 3D aromatic-like closo-[B12H12]2- as boron source. In addition, polystyrene microspheres are added to help introduce porous structure to expose more active sites. Benefitting from porous structures and the synergistic coupling effect between N and B atoms, BCN-P has a high onset potential (Eonset=0.846 V) and half-wave potential (E1/2=0.74 V) in alkaline media. The zinc-air battery assembled with BCN-P shows high operating voltage (1.42 V), peak power density (128.7 mW cm-2) and stable charge/discharge cycles, which is even comparable with Pt/C.

Sharply expanding single-atomically dispersed Fe-N active sites through bidirectional coordination for oxygen reduction

For Fe-NC systems, high-density Fe-N sites are the basis for high-efficiency oxygen reduction reaction (ORR), and P doping can further lower the reaction energy barrier, especially in the form of metal-P bonding. However, limited to the irregular agglomeration of metal atoms at high temperatures, Fe-P bonds and high-density Fe-N cannot be guaranteed simultaneously. Here, to escape the random and violent agglomeration of Fe species during high-temperature carbonization, triphenylphosphine and 2-methylimidazole with a strong metal coordination capability are introduced together to confine Fe growth. With the aid of such bidirectional coordination, the high-density Fe-N site with Fe-P bonds is realized by in situ phosphorylation of Fe in an Fe-NC system (Fe-P-NC) at high temperatures. Impressively, the content of single-atomically dispersed Fe sites for Fe-P-NC dramatically increases from 2.8% to 65.3% compared with that of pure Fe-NC, greatly improving the ORR activity in acidic and alkaline electrolytes. The theoretical calculation results show that the generated Fe2P can simultaneously facilitate the adsorption of intermediates to Fe-N4 sites and the electron transfer, thereby reducing the reaction energy barrier and obtaining superior ORR activity.

Oxygen vacancies enhanced electrocatalytic water splitting of P-FeMoO4 initiated via phosphorus doping

Transition metal oxides (TMOs) are abundant and cost-effective materials. However, poor conductivity and low intrinsic activity limit their application in electrolyzed water catalysts. Herein, we prepared P-FeMoO4 in situ on nickel foam (P-FMO@NF) by phosphorylation-modified FeMoO4 to optimize its electrocatalytic properties. Interestingly, phosphorus doping is accompanied by the generation of oxygen vacancies and surface phosphates. Oxygen vacancies accelerated Mo dissolution during the oxygen evolution reaction (OER), leading to the rapid reconfiguration of P-FMO@NF to FeOOH and regulating the electronic structure of P-FMO@NF. The formation of phosphates is caused by the substitution of some molybdates with phosphates, which further increases the amount of oxygen vacancies. Hence, the OER overpotential of P-FMO@NF at a current density of 10 mA cm-2 is only 206 mV, and the hydrogen evolution reaction (HER) overpotential is 154 mV. It was assembled into a water splitting cell with a voltage of just 1.59 V at 10 mA cm-2 and shows excellent stability over 50 h. These excellent electrocatalytic properties are mainly attributed to the oxygen vacancies, which improve the interfacial charge transfer properties of the catalysts. This study provides new insights into phosphorus doping and offers a new perspective on the design of electrocatalysts.

Constructing Directional Electrostatic Potential Difference via Gradient Nitrogen Doping for Efficient Oxygen Reduction Reaction

Nitrogen doping has been recognized as an important strategy to enhance the oxygen reduction reaction (ORR) activity of carbon-encapsulated transition metal catalysts (TM@C). However, previous reports on nitrogen doping have tended to result in a random distribution of nitrogen atoms, which leads to disordered electrostatic potential differences on the surface of carbon layers, limiting further control over the materials' electronic structure. Herein, a gradient nitrogen doping strategy to prepare nitrogen-deficient graphene and nitrogen-rich carbon nanotubes encapsulated cobalt nanoparticles catalysts (Co@CNTs@NG) is proposed. The unique gradient nitrogen doping leads to a gradual increase in the electrostatic potential of the carbon layer from the nitrogen-rich region to the nitrogen-deficient region, facilitating the directed electron transfer within these layers and ultimately optimizing the charge distribution of the material. Therefore, this strategy effectively regulates the density of state and work function of the material, further optimizing the adsorption of oxygen-containing intermediates and enhancing ORR activity. Theoretical and experimental results show that under controlled gradient nitrogen doping, Co@CNTs@NG exhibits significantly ORR performance (Eonset = 0.96 V, E1/2 = 0.86 V). At the same time, Co@CNTs@NG also displays excellent performance as a cathode material for Zn-air batteries, with peak power density of 132.65 mA cm-2 and open-circuit voltage (OCV) of 1.51 V. This work provides an effective gradient nitrogen doping strategy to optimize the ORR performance.

Synergistic Effect of Electrocatalyst for Enhanced Oxygen Reduction Reaction: Low Pt-Loaded CuPt Alloy Nanoparticles Supported on N-Doped Hierarchical Porous Carbon

It is challenging to synthesize oxygen reduction reaction (ORR) electrocatalysts that are highly efficient, affordable, and stable for use in proton exchange membrane fuel cells. To address this challenge, we developed a low platinum-loading (only 6.68% wt) ORR catalyst (PtCu1-NC), comprising CuPt nanoparticles (average size: 1.51 nm) supported on the N-doped carbon substrates. PtCu1-NC possesses a high specific surface area of 662 m2 g-1 and a hierarchical porous structure, facilitating efficient mass transfer. The synergistic effect from introduced copper and the electron effect from nitrogen modify the electronic structure of platinum, effectively accelerating the ORR reaction and enhancing stability. Density functional theory calculations demonstrate the catalytic mechanism and further verify the synergistic effect. Electrochemical assessments indicate that PtCu1-NC exhibits specific activity and mass activity 5.3 and 5.6 times higher, respectively, than commercial Pt/C. The half-wave potential is 27 mV more positive than that of commercial Pt/C. The electrochemical active surface area value is 104.3 m2 g-1, surpassing that of Pt/C. Approximately 78% of current is retained after 10,000 s chronoamperometry measurement. These results highlight the effectiveness of alloying in improving the catalyst performance.

Controlled Construction of Core-Shell Structured Prussian Blue Analogues towards Enhanced Oxygen Reduction

Metal-organic frameworks-based electrocatalysts have been developed as highly desirable and promising candidates for catalyzing oxygen reduction reaction (ORR), which, however, usually need to be prepared at elevated temperatures and may suffer from the framework collapse in water environments, largely preventing its industrial application. Herein, this work demonstrates a facile low-temperature ion exchange method to synthesize Mn and Fe co-loaded Prussian blue analogues possessing core-shell structured frameworks and favorable water-tolerance. Among the catalysts prepared, the optimal HMPB-2.6Mn shows a high ORR electrocatalytic performance featuring a half-wave potential of 0.86 V and zinc-air battery power density of 119 mW cm-2 , as well as negligible degradation up to 60 h, which are comparable to commercial Pt/C. Such an excellent electrocatalytic performance is attributed to the special core-shell-like structure with Mn concentrated in outer shell, and the synergetic interactions between Mn and Fe, endowing HMPB-Mn with outstanding ORR activity and good stability.

Engineering Electronic Structure of Nitrogen-Carbon Sites by sp3 -Hybridized Carbon and Incorporating Chlorine to Boost Oxygen Reduction Activity

Development of efficient and easy-to-prepare low-cost oxygen reaction electrocatalysts is essential for widespread application of rechargeable Zn-air batteries (ZABs). Herein, we mixed NaCl and ZIF-8 by simple physical milling and pyrolysis to obtain a metal-free porous electrocatalyst doped with Cl (mf-pClNC). The mf-pClNC electrocatalyst exhibits a good oxygen reduction reaction (ORR) activity (E1/2 =0.91 V vs. RHE) and high stability in alkaline electrolyte, exceeding most of the reported transition metal carbon-based electrocatalysts and being comparable to commercial Pt/C electrocatalysts. Likewise, the mf-pClNC electrocatalyst also shows state-of-the-art ORR activity and stability in acidic electrolyte. From experimental and theoretical calculations, the better ORR activity is most likely originated from the fact that the introduced Cl promotes the increase of sp3 -hybridized carbon, while the sp3 -hybridized carbon and Cl together modify the electronic structure of the N-adjacent carbons, as the active sites, while NaCl molten-salt etching provides abundant paths for the transport of electrons/protons. Furthermore, the liquid rechargeable ZAB using the mf-pClNC electrocatalyst as the cathode shows a fulfilling performance with a peak power density of 276.88 mW cm-2 . Flexible quasi-solid-state rechargeable ZAB constructed with the mf-pClNC electrocatalyst as the cathode exhibits an exciting performance both at low, high and room temperatures.

Covalent organic framework-derived fluorine, nitrogen dual-doped carbon as metal-free bifunctional oxygen electrocatalysts

The construction of heteroatom-doped metal-free carbon catalysts with bifunctional catalytic activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is highly desired for Zn-air batteries, but remains a great challenge owing to the sluggish kinetics of OER and ORR. Herein, a self-sacrificing template engineering strategy was employed to fabricate fluorine (F), nitrogen (N) co-doped porous carbon (F-NPC) catalyst by direct pyrolysis of F, N containing covalent organic framework (F-COF). The predesigned F and N elements were integrated into the skeletons of COF precursor, thus achieving uniformly distributed heteroatom active sites. The introduction of F is beneficial for the formation of edge-defects, contributing to the enhancement of the electrocatalytic activity. Attributing to the porous feature, abundant defect sites induced by F doping, as well as the strong synergistic effect between N and F atoms to afford a high intrinsic catalytic activity, the resulting F-NPC catalyst exhibits excellent bifunctional catalytic activities for both ORR and OER in alkaline mediums. Furthermore, the assembled Zn-air battery with F-NPC catalyst shows a high peak power density of 206.3 mW cm-2 and great stability, surpassing the commercial Pt/C + RuO2 catalysts.

Fullerene Fragment Restructuring: How Spatial Proximity Shapes Defect-Rich Carbon Electrocatalysts

Fullerene transformation emerges as a powerful route to construct defect-rich carbon electrocatalysts, but the carbon bond breakage and reformation that determine the defect states remain poorly understood. Here, we explicitly reveal that the spatial proximity of disintegrated fullerene imposes a crucial impact on the bond reformation and electrocatalytic properties. A counterintuitive hard-template strategy is adopted to enable the space-tuned fullerene restructuring by calcining impregnated C60 not only before but also after the removal of rigid silica spheres (∼300 nm). When confined in the SiO2 nanovoids, the adjacent C60 fragments form sp3 bonding with adverse electron transfer and active site exposure. In contrast, the unrestricted fragments without SiO2 confinement reconnect at the edges to form sp2-hybridized nanosheets while retaining high-density intrinsic defects. The optimized catalyst exhibits robust alkaline oxygen reduction performance with a half-wave potential of 0.82 V via the 4e- pathway. Copper poisoning affirms the intrinsic defects as the authentic active sites. Density functional theory calculations further substantiate that pentagons in the basal plane lead to localized structural distortion and thus exhibit significantly reduced energy barriers for the first O2 dissociation step. Such space-regulated fullerene restructuring is also verified by heating C60 crystals confined in gallium liquid and a quartz tube.

Insight into Defect Engineering of Atomically Dispersed Iron Electrocatalysts for High-Performance Proton Exchange Membrane Fuel Cell

Atomically dispersed and nitrogen coordinated iron catalysts (Fe-NCs) demonstrate potential as alternatives to platinum-group metal (PGM) catalysts in oxygen reduction reaction (ORR). However, in the context of practical proton exchange membrane fuel cell (PEMFC) applications, the membrane electrode assembly (MEA) performances of Fe-NCs remain unsatisfactory. Herein, improved MEA performance is achieved by tuning the local environment of the Fe-NC catalysts through defect engineering. Zeolitic imidazolate framework (ZIF)-derived nitrogen-doped carbon with additional CO2 activation is employed to construct atomically dispersed iron sites with a controlled defect number. The Fe-NC species with the optimal number of defect sites exhibit excellent ORR performance with a high half-wave potential of 0.83 V in 0.5 M H2 SO4 . Variation in the number of defects allows for fine-tuning of the reaction intermediate binding energies by changing the contribution of the Fe d-orbitals, thereby optimizing the ORR activity. The MEA based on a defect-engineered Fe-NC catalyst is found to exhibit a remarkable peak power density of 1.1 W cm-2 in an H2 /O2 fuel cell, and 0.67 W cm-2  in an H2 /air fuel cell, rendering it one of the most active atomically dispersed catalyst materials at the MEA level.

"Setaria viridis"-like cobalt complex derived Co/N-doped carbon nanotubes as efficient ORR/OER electrocatalysts for long-life rechargeable Zn-air batteries

The development of efficient and facile strategies to prepare metal and nitrogen codoped carbon (M-N-C) materials as oxygen electrocatalysts in rechargeable Zn-air batteries with high performance and a long life is challenging. Herein, we report a simple route to synthesize cobalt and nitrogen codoped carbon nanotubes (denoted as Co/N-CNT) as bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries (ZABs). The Co/N-CNT are fabricated through the surface modification of carbon nanotubes with cobalt salt and melamine followed by pyrolysis, which delivers outstanding oxygen reduction/evolution reaction (ORR/OER) activity with a low overall potential gap (ΔE = 0.77 V) and remarkable durability. The home-made Zn-air batteries exhibit a high power density (130 mW cm-2vs. 82 mW cm-2), a large specific capacity of (864 mA h g-1Znvs. 785 mA h g-1Zn), and a long cycling life (1200 h vs. 60 h) in both aqueous and solid media. This work opens an avenue for the reasonable surface modification of carbon nanotubes with various metals and heteroatoms to achieve high-performance electrocatalysts for clean and sustainable energy conversion and storage devices.

Lignin-derived carbon nanosheets boost electrochemical reductive amination of pyruvate to alanine

Efficient and sustainable amino acid synthesis is essential for industrial applications. Electrocatalytic reductive amination has emerged as a promising method, but challenges such as undesired side reactions and low efficiency persist. Herein, we demonstrated a lignin-derived catalyst for alanine synthesis. Carbon nanosheets (CNSs) were synthesized from lignin via a template-assisted method and doped with nitrogen and sulfur to boost reductive amination and suppress side reactions. The resulting N,S-co-doped carbon nanosheets (NS-CNSs) exhibited outstanding electrochemical performance. It achieved a maximum alanine Faradaic efficiency of 79.5%, and a yield exceeding 1,199 μmol h-1 cm-2 on NS-CNS, with a selectivity above 99.9%. NS-CNS showed excellent durability during long-term electrolysis. Kinetic studies including control experiments and theoretical calculations provided further insights into the reaction pathway. Moreover, NS-CNS catalysts demonstrated potential in upgrading real-world polylactic acid plastic waste, yielding value-added alanine with a selectivity over 75%.

WO3 -Assisted Synergetic Effect Catalyzes Efficient and CO-Tolerant Hydrogen Oxidation for PEMFCs

Developing anode catalysts with substantially enhanced activity for hydrogen oxidation reaction (HOR) and CO tolerance performance is of great importance for the commercial applications of proton exchange membrane fuel cells (PEMFCs). Herein, an excellent CO-tolerant catalyst (Pd-WO3 /C) has been fabricated by loading Pd nanoparticles on WO3 via an immersion-reduction route. A remarkably high power density of 1.33 W cm-2 at 80 °C is obtained by using the optimized 3Pd-WO3 /C as the anode catalyst of PEMFCs, and the moderately reduced power density (73% remained) in CO/H2 mixed gas can quickly recover after removal of CO-contamination from hydrogen fuel, which is not possible by using Pt/C or Pd/C as anode catalyst. The prominent HOR activity of 3Pd-WO3 /C is attributed to the optimized interfacial electron interaction, in which the activated H* adsorbed on Pd species can be effectively transferred to WO3 species through hydrogen spillover effect and then oxidized through the H species insert/output effect during the formation of Hx WO3 in acid electrolyte. More importantly, a novel synergetic catalytic mechanism about excellent CO tolerance is proposed, in which Pd and WO3 respectively absorbs/activates CO and H2 O, thus achieving the CO electrooxidation and re-exposure of Pd active sites for CO-tolerant HOR.

Axial Oxygen Ligands Regulating Electronic and Geometric Structure of Zn-N-C Sites to Boost Oxygen Reduction Reaction

Zn-N-C possesses the intrinsic inertia for Fenton-like reaction and can retain robust durability in harsh circumstance, but it is often neglected in oxygen reduction reaction (ORR) because of its poor catalytic activity. Zn is of fully filled 3d10 4s2 configuration and is prone to evaporation, making it difficult to regulate the electronic and geometric structure of Zn center. Here, guided by theoretical calculations, five-fold coordinated single-atom Zn sites with four in-plane N ligands is constructed and one axial O ligand (Zn-N4 -O) by ionic liquid-assisted molten salt template method. Additional axial O not only triggers a geometry transformation from the planar structure of Zn-N4 to the non-planar structure of Zn-N4 -O, but also induces the electron transfer from Zn center to neighboring atoms and lower the d-band center of Zn atom, which weakens the adsorption strength of *OH and decreases the energy barrier of rate determining step of ORR. Consequently, the Zn-N4 -O sites exhibit improved ORR activity and excellent methanol tolerance with long-term durability. The Zn-air battery assembled by Zn-N4 -O presents a maximum power density of 182 mW cm-2 and can operate continuously for over 160 h. This work provides new insights into the design of Zn-based single atom catalysts through axial coordination engineering.

Designing a Hierarchical Porous Carbon with Optimized Nitrogen Doping for Efficient Oxygen Reduction Reaction

Nitrogen-doped carbon is considered one of the most promising oxygen reduction catalysts due to its low cost and high activity, however, it still falls short of Pt/C. In this study, we report a strategy for the preparation of highly reactive N-doped hierarchical porous carbon by primary pyrolysis using zinc acetate as a stand-alone zinc source and amino-rich reactants as carbon and nitrogen sources to introduce Zn-Nx structures into mesoporous structures generated by the hard template method using the strong coordination of zinc and amino groups. Benefited from the simultaneous optimization of the hierarchical porous structure and nitrogen-doping, the half-wave potential of Zn(OAc)2 -DCD/HPC is as high as 0.909 V vs. RHE, much better than that of commercial Pt/C catalysts (0.872 V vs. RHE). In addition, zinc-air batteries assembled with Zn(OAc)2 -DCD/HPC (Pmax =198 mW cm-2 ) as the cathode exhibit higher peak power density compared to Pt/C (Pmax =168 mW cm-2 ). This strategy might open up new opportunities for designing and developing highly active metal-free catalysts.

Tailoring Metal-Organic Frameworks and Derived Materials for High-Performance Zinc-Air and Alkaline Batteries

Developing multifunctional materials from earth-abundant elements is urgently needed to satisfy the demand for sustainable energy. Herein, we demonstrate a facile approach for the preparation of a metal-organic framework (MOF)-derived Fe₂O₃/C, composited with N-doped reduced graphene oxide (MO-rGO). MO-rGO exhibits excellent bifunctional electrocatalytic activities toward the oxygen evolution reaction (η_j=10 = 273 mV) and the oxygen reduction reaction (half-wave potential = 0.77 V vs reversible hydrogen electrode) with a low ΔE_OER-ORR of 0.88 V in alkaline solutions. A Zn-air battery based on the MO-rGO cathode displays a high specific energy of over 903 W h kg_Zn^-1 (∼290 mW h cm^-2), an excellent power density of 148 mW cm^-2, and an open-circuit voltage of 1.430 V, outperforming the benchmark Pt/C + RuO₂ catalyst. We also hydrothermally synthesized a Ni-MOF that was partially transformed into a Ni-Co-layered double hydroxide (MOF-LDH). A MO-rGO||MOF-LDH alkaline battery exhibits a specific energy of 42.6 W h kg_total mass^-1 (106.5 μW h cm^-2) and an outstanding specific power of 9.8 kW kg_total mass^-1 (24.5 mW cm^-2). This work demonstrates the potential of MOFs and MOF-derived compounds for designing innovative multifunctional materials for catalysis, electrochemical energy storage, and beyond.

Iron clusters regulate local charge distribution in Fe-N4 sites to boost oxygen electroreduction

The atomically-dispersed and nitrogen-coordinated iron (FeNC) on a carbon catalyst is a potential non-noble metal catalyst that can replace precious metal electrocatalysts. However, its activity is often unsatisfactory owing to the symmetric charge distribution around the iron matrix. In this study, atomically- dispersed Fe-N₄ and Fe nanoclusters loaded with N-doped porous carbon (Fe_NCs/Fe_SAs-NC-Z8@34) were rationally fabricated by introducing homologous metal clusters and increasing the N content of the support. Fe_NCs/Fe_SAs-NC-Z8@34 exhibited a half-wave potential of 0.918 V, which exceeded that of the commercial benchmark Pt/C catalyst. Theoretical calculations verified that introducing Fe nanoclusters can break the symmetric electronic structure of Fe-N₄, thus inducing charge redistribution. Furthermore, it can optimize a part of Fe 3d occupancy orbitals and accelerate OO fracture in OOH* (rate-determining step), thus significantly improving oxygen reduction reaction activity. This work provides a reasonably advanced pathway to modulate the electronic structure of the single-atom center and optimize the catalytic activity of single-atom catalysts.

Research Progress on Porous Carbon-Based Non-Precious Metal Electrocatalysts

The development of efficient, stable, and economic electrocatalysts are key to the large-scale application of electrochemical energy conversion. Porous carbon-based non-precious metal electrocatalysts are considered to be the most promising materials to replace Pt-based catalysts, which are limited in large-scale applications due to high costs. Because of its high specific surface area and easily regulated structure, a porous carbon matrix is conducive to the dispersion of active sites and mass transfer, showing great potential in electrocatalysis. This review will focus on porous carbon-based non-precious metal electrocatalysts and summarize their new progress, focusing on the synthesis and design of porous carbon matrix, metal-free carbon-based catalysts, non-previous metal monatomic carbon-based catalyst, and non-precious metal nanoparticle carbon-based catalysts. In addition, current challenges and future trends will be discussed for better development of porous carbon-based non-precious metal electrocatalysts.

Understanding the Highly Reversible Potassium Storage of Hollow Ternary (Bi-Sb)2S3@N-C Nanocube

Metal sulfide anodes have aroused much attention in potassium ion batteries (PIBs) owing to their high theoretical capacities, but the sluggish kinetics and inferior cycling performance caused by severe volumetric change and particle pulverization greatly hinder their further development. Herein, robust hollow structure design together with phase structure engineering endow (Bi-Sb)₂S₃@N-C anode with superior (de)potassiation kinetics and excellent electrochemical performances in PIBs. Specifically, in situ X-ray diffraction combined with density functional theory calculations and ex situ X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy (TEM) analyses indicated a fresh reaction mechanism of (Bi-Sb)₂S₃ anode with a distinctive multistep (de)potassiation route along (003) plane of (Bi,Sb) alloy thanks to the Bi-Sb phase regulation in (Bi-Sb)₂S₃ anode, ensuring it with superior reaction kinetics. Moreover, in situ TEM characterization revealed the advantages of the hollow nanostructure with carbon shell, facilitating fast ion transport kinetics and high tolerance of volume change as well as enabling the structural integrity of electrode material during (de)potassiation. As a result, the (Bi-Sb)₂S₃ hollow nanocube with N-doped carbon shell ((Bi-Sb)₂S₃@N-C) delivers a high initial Coulombic efficiency of 66.3%, a great rate performance of 289 mAh g^-1 at 2.0 A g^-1, and an ultralong cycling life (89% retention after 220 cycles at 0.1 A g^-1 and 85% retention after 1600 cycles at 2.0 A g^-1) in PIBs. Furthermore, the full cell of (Bi-Sb)₂S₃@N-C//PTCDA affords a high reversible capacity of 281 mA h g^-1 at 1.0 A g^-1 after 300 cycles. This work combines structural design and in situ techniques, proving a successful nanostructure engineering strategy to rationalize alloy-type electrode materials for PIBs.

Carbon-Based Electrocatalysts for Acidic Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is vital for clean and renewable energy technologies, which require no fossil fuel but catalysts. Platinum (Pt) is the best-known catalyst for ORR. However, its high cost and scarcity have severely hindered renewable energy devices (e.g., fuel cells) for large-scale applications. Recent breakthroughs in carbon-based metal-free electrochemical catalysts (C-MFECs) show great potential for earth-abundant carbon materials as low-cost metal-free electrocatalysts towards ORR in acidic media. This article provides a focused, but critical review on C-MFECs for ORR in acidic media with an emphasis on advances in the structure design and synthesis, fundamental understanding of the structure-property relationship and electrocatalytic mechanisms, and their applications in proton exchange membrane fuel cells. Current challenges and future perspectives in this emerging field are also discussed.

Rational Fabrication of Defect-Rich and Hierarchically Porous Fe-N-C Nanosheets as Highly Efficient Oxygen Reduction Electrocatalysts for Zinc-Air Battery

The rational design of morphology and structure for oxygen reduction reaction (ORR) catalysts still remains a critical challenge. Herein, we successfully construct defect-rich and hierarchically porous Fe-N-C nanosheets (Fe-N-CNSs), by taking advantage of metal-organic complexation and a mesoporous template. Benefiting from the advantages of high density of active sites, fast mass transfer channels, and sufficient reaction area, the optimal Fe-N-CNSs demonstrate satisfactory ORR activity with an excellent half-wave potential of up to 0.87 V, desirable durability, and robust methanol tolerance. Noteworthy, the Fe-N-CNSs based zinc-air battery shows significant performance with a peak power density of 128.20 mW cm^-2 and open circuit voltage of 1.53 V, which reveals that the Fe-N-CNSs catalysts present promising practical application prospects. Therefore, we believe that this research will provide guidance for the optimization of Fe-N-C materials.

Isometric Covalent Triazine Framework-Derived Porous Carbons as Metal-Free Electrocatalysts for the Oxygen Reduction Reaction

Covalent triazine frameworks (CTFs) and their derivative N-doped carbons have attracted much attention for application in energy conversion and storage. However, previous studies have mainly focused on developing new building blocks and optimizing synthetic conditions. The use of isometric building blocks to control the porous structure and to fundamentally understand structure-property relationships have rarely been reported. In this work, two isometric building blocks are used to produce isometric CTFs with controllable pore geometries. The as-prepared CTF with nonplanar hexagonal rings demonstrates higher surface area, larger pore volume, and richer N content than the planar CTF. After pyrolysis, nonplanar porous CTF-derived N-doped carbons exhibit admirable catalytic activity for oxygen reduction in alkaline media (half-wave potential: 0.86 V; Tafel slope: 65 mV dec^-1 ), owing to their larger pore volume and the abundance of pyridinic and graphitic N species. When assembled into a zinc-air battery, the as-made electrocatalysts show high capacities of up to 651 mAh g^-1 and excellent durability.

Tuning active sites for highly efficient bifunctional oxygen electrocatalysts of rechargeable zinc-air battery

High activity, excellent durability, and low-cost oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) bifunctional catalysts are highly required for rechargeable zinc (Zn)-air batteries. Herein, we designed an electrocatalyst by integrating the ORR active species of ferroferric oxide (Fe₃O₄) and the OER active species of cobaltous oxide (CoO) into the carbon nanoflower. By well regulating and controlling the synthesis parameters, Fe₃O₄ and CoO nanoparticles were uniformly inserted into the porous carbon nanoflower. This electrocatalyst can reduce the potential gap between the ORR and OER to 0.79 V. The Zn-air battery assembled with it exhibited an open-circuit voltage of 1.457 V, a stable discharge of 98 h, a high specific capacity of 740 mA h g^-1, a large power density of 137 mW cm^-2, as well as good charge/discharge cycling performance, exceeding the performance of platinum/carbon (Pt/C). This work provides references for exploring highly efficient non-noble metal oxygen electrocatalysts by tuning ORR/OER active sites.

Conductivity-enhanced porous N/P co-doped metal-free carbon significantly enhances oxygen reduction kinetics for aqueous/flexible zinc-air batteries

Heteroatom-doped metal-free carbon catalysts for oxygen reduction reactions have gained significant attention because of their unusual activity and economic cost. Here, a novel N/P co-doped porous carbon catalyst (NPPC) with a high surface area for oxygen reduction reaction (ORR) is constructed by a facile high-temperature calcination method employing ZIF-8 as the precursor and red phosphorus as the phosphorus source. In particular, ZIF-8 is firstly calcined to obtain N-doped carbon (NC) followed by further calcination with red phosphorus to obtain NPPC. Ultraviolet photoelectron spectroscopy (UPS) analysis shows that the ultra-low amount of P doping could significantly decrease the work function from 4.32 to 3.86 eV. The resultant catalyst exhibits a promising electrocatalytic activity with a half-wave potential (E_1/2) of 0.87 V and a limiting current density (J_L) of 5.15 mA cm^-2. Besides, it also shows improved catalytic efficiency and excellent durability with a negligible decay of J_L after 2000 CV cycles. Moreover, aqueous and solid-state flexible zinc-air batteries (ZAB) using the catalyst show a promising application potential. This work provides new insight into developing P/N-doped metal-free carbon ORR catalysts.

Candied Haws-Like Fe-N-C Catalysts with Broadened Carbon Interlayer Spacing for Efficient Zinc-Air Battery

As efficient nonprecious metal catalysts for oxygen reduction reaction (ORR), Fe-N-C materials are one of the most promising alternatives to Pt-based catalysts for fuel cells and metal-air batteries. However, the intrinsically low density of key active sites like FeN₄ moieties hampers their commercial applications. Herein, we provide a smart strategy to construct a candied haws-like Fe-N-C catalyst (CH-FeNC) with broadened carbon interplanar spacing (>4 Å), starting with trehalose as a structure-built brick coupled with a zinc-zeolite imidazole framework (ZIF-8) and polyaniline (PANI) and then followed by copyrolysis carbonization of them. The obtained CH-FeNC exhibits half-wave potentials of 0.92 and 0.90 V (vs RHE) before and after 10,000 cycles in 0.1 M KOH, which are superior to the 0.90 and 0.85 V obtained by commercial Pt/C for ORR. The power density of a homemade zinc-air battery equipped with the catalyst is up to 131 mW cm^-2, greater than that of Pt/C (124 mW cm^-2). The extended X-ray absorption fine structure (EXAFS) results and density functional theory (DFT) theoretical calculations reveal that there exists enriched zigzag or armchair edge-hosted FeN₄ active sites, located at the abundant interface between carbon components in this composite. Furthermore, the unique broadened carbon interlayer spacing plays a key role in deciding the ORR rate in alkaline but not in acidic environments because there exists a fifth ligand of active Fe in the form of FeN₄ centers coupled with SO₄^2- and ClO₄^- from acids.

The Role of Discrepant Reactive Intermediates on Ru-Ru2 P Heterostructure for pH-Universal Hydrogen Oxidation Reaction

Developing highly efficient electrocatalysts for hydrogen oxidation reaction (HOR) under alkaline media is essential for the commercialization of alkaline exchange membrane fuel cell (AEMFC). However, the kinetics of HOR in alkaline media is complicated, resulting in orders of magnitude slower than that in acid, even for the state-of-the-art Pt/C. Here, we find that Ru-Ru₂ P/C heterostructure shows HOR performance with a non-monotonous variation in a whole pH region. Unexpectedly, an inflection point located at pH≈7 is observed, showing an anomalous behavior that HOR activity under alkaline media surpasses acidic media. Combining experimental results and theoretical calculations, we propose the roles of discrepant reactive intermediates for pH-universal HOR, while H* and H₂ O* adsorption strengths are responsible for acidic HOR, and OH* adsorption strength is essential for alkaline HOR. This work not only sheds light on fundamentally understanding the mechanism of HOR but also provides new designing principles for pH-targeted electrocatalysts.

Carbon Surface-Influenced Heterogeneity of Ni and Co Catalytic Sites as a Factor Affecting the Efficiency of Oxygen Reduction Reaction

Highly porous carbon black and micro/mesoporous activated carbon were impregnated with cobalt and nickel nitrates, followed by heat treatment at 850 °C in nitrogen. Detailed information about chemistry and porosity was obtained using XPS, XRD, TEM/EDX, and nitrogen adsorption. The samples were used as ORR catalysts. Marked differences in the performance were found depending on the type of carbon. Differences in surface chemistry and porosity affected the chemistry of the deposited metal species that governed the O₂ reduction efficiency along with other features of the carbon supports, including electrical conductivity and porosity. While dissociating surface acidic groups promoted the high dispersion of small metal species, carbon reactivity with oxygen and acidity limited the formation of the most catalytically active Co₃O₄. Formation of Co₃O₄ on the highly conductive carbon black resulted in an excellent performance with four electrons transferred and a current density higher than that on Pt/C. When Co₃O₄ was not formed in a sufficient quantity, nickel metal nanoparticles promoted ORR on the Ni/Co-containing samples. The activity was also significantly enhanced by small pores that increased the ORR efficiency by strongly adsorbing oxygen, which led to its bond splitting, followed by the acceptance of four electrons.

Reconstruction of Highly Dense Cu−N 4 Active Sites in Electrocatalytic Oxygen Reduction Characterized by Operando Synchrotron Radiation

The emerging star of single atomic site (SAS) catalyst has been regarded as the most promising Pt-substituted electrocatalyst for oxygen reduction reaction (ORR) in anion-exchange membrane fuel cells (AEMFCs). However, the metal loading in SAS directly affects the whole device performance. Herein, we report a dual nitrogen source coordinated strategy to realize high dense Cu-N₄ SAS with a metal loading of 5.61 wt% supported on 3D N-doped carbon nanotubes/graphene structure wherein simultaneously performs superior ORR activity and stability in alkaline media. When applied in H₂ /O₂ AEMFC, it could reach an open-circuit voltage of 0.90 V and a peak power density of 324 mW cm^-2 . Operando synchrotron radiation analyses identify the reconstruction from initial Cu-N₄ to Cu-N₄ /Cu-nanoclusters (NC) and the subsequent Cu-N₃ /Cu-NC under working conditions, which gradually regulate the d-band center of central metal and balance the Gibbs free energy of *OOH and *O intermediates, benefiting to ORR activity.

Metal-organic framework nanocrystal-derived hollow porous materials: Synthetic strategies and emerging applications

Metal-organic frameworks (MOFs) have garnered multidisciplinary attention due to their structural tailorability, controlled pore size, and physicochemical functions, and their inherent properties can be exploited by applying them as precursors and/or templates for fabricating derived hollow porous nanomaterials. The fascinating, functional properties and applications of MOF-derived hollow porous materials primarily lie in their chemical composition, hollow character, and unique porous structure. Herein, a comprehensive overview of the synthetic strategies and emerging applications of hollow porous materials derived from MOF-based templates and/or precursors is given. Based on the role of MOFs in the preparation of hollow porous materials, the synthetic strategies are described in detail, including (1) MOFs as removable templates, (2) MOF nanocrystals as both self-sacrificing templates and precursors, (3) MOF@secondary-component core-shell composites as precursors, and (4) hollow MOF nanocrystals and their composites as precursors. Subsequently, the applications of these hollow porous materials for chemical catalysis, electrocatalysis, energy storage and conversion, and environmental management are presented. Finally, a perspective on the research challenges and future opportunities and prospects for MOF-derived hollow materials is provided.

•

MOFs have garnered multi-disciplinary attention due to their unique inherent properties

•

Various synthetic strategies of MOFs-derived hollow porous materials are summarized

•

Emerging applications of MOFs-derived hollow porous materials are reviewed