Design Strategies for High-Energy-Density Aqueous Zinc Batteries

MnO2 superstructure cathode with boosted zinc ion intercalation for aqueous zinc ion batteries

The simultaneous intercalation of protons and Zn2+ ions in aqueous electrolytes presents a significant obstacle to the widespread adoption of aqueous zinc ion batteries (AZIBs) for large-scale use, a challenge that has yet to be overcome. To address this, we have developed a MnO2/tetramethylammonium (TMA) superstructure with an enlarged interlayer spacing, designed specifically to control H+/Zn2+ co-intercalation in AZIBs. Within this superstructure, the pre-intercalated TMA+ ions work as spacers to stabilize the layered structure of MnO2 cathodes and expand the interlayer spacing substantially by 28 % to 0.92 nm. Evidence from in operando pH measurements, in operando synchrotron X-ray diffraction, and X-ray absorption spectroscopy shows that the enlarged interlayer spacing facilitates the diffusion and intercalation of Zn2+ ions (which have a large ionic radius) into the MnO2 cathodes. This spacing also helps suppress the competing H+ intercalation and the formation of detrimental Zn4(OH)6SO4·5H2O, thereby enhancing the structural stability of MnO2. As a result, enhanced Zn2+ storage properties, including excellent capacity and long cycle stability, are achieved.

Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long-Lasting Zinc Metal Batteries

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL-regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long-lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N-dimethyl-1H-imidazole-1-sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O-induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de-solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8 ⋅ 1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high-performance zinc metal batteries.

A bio-based functional separator enables dendrite-free anodes in aqueous zinc-ion batteries

Aqueous zinc-ion batteries (AZIBs) have garnered considerable interest as potential solutions for large-scale energy storage systems, owing to their cost-effectiveness and high safety. Nonetheless, the development of AZIBs is hindered by significant challenges associated with dendrite growth and side reactions on Zn anodes. Here, a bio-based separator derived from cellulose was developed for the dendrite-free anode in AZIBs. In addition, the separator is notable for its ultra-low cost and biodegradability in contrast to the commonly used commercial glass fiber (GF) separators. The mechanical strength of the separator is enhanced by the cross-linking of hydrogen bonds, effectively inhibiting dendrite growth. The zinc-philic groups facilitate better binding to Zn2+, resulting in uniform nucleation and deposition. The hydrophilic groups aid in trapping water molecules, thereby preventing side reactions of the electrolyte. The Zn||Zn symmetric cell with this separator can sustain a long cycle life for over 800 h, indicating stable Zn2 + plating and stripping with suppressed dendrite growth. Concurrently, the assembled Zn||VO2 full batteries exhibited a capacity retention rate of 61.87% after 1,000 cycles at 1 A g-1 with an initial capacity of 140 mAh g-1. This work highlights a stable, economical, and eco-friendly approach to the design of bio-based separators in AZIBs for sustainable energy storage systems.

A Stable High-Performance Zn-Ion Batteries Enabled by Highly Compatible Polar Co-Solvent

Uncontrollable growth of Zn dendrites, irreversible dissolution of cathode material and solidification of aqueous electrolyte at low temperatures severely restrict the development of aqueous Zn-ion batteries. In this work, 2,2,2-trifluoroethanol (TFEA) with a volume fraction of 50% as a highly compatible polar-solvent is introduced to 1.3 M Zn(CF3SO3)2 aqueous electrolyte, achieving stable high-performance Zn-ion batteries. Massive theoretical calculations and characterization analysis demonstrate that TFEA weakens the tip effect of Zn anode and restrains the growth of Zn dendrites due to electrostatic adsorption and coordinate with H2O to disrupt the hydrogen bonding network in water. Furthermore, TFEA increases the wettability of the cathode and alleviates the dissolution of V2O5, thus improving the capacity of the full battery. Based on those positive effects of TFEA on Zn anode, V2O5 cathode, and aqueous electrolyte, the Zn//Zn symmetric cell delivers a long cycle-life of 782 h at 5 mA cm-2 and 2 mA h cm-2. The full battery still declares an initial capacity of 116.78 mA h g-1, and persists 87.73% capacity in 2000 cycles at -25 °C. This work presents an effective strategy for fully compatible co-solvent to promote the stability of Zn anode, V2O5 cathode and aqueous electrolyte for high-performance Zn-ion batteries.

Improving Aqueous Zinc Ion Batteries with Alkali Metal Ions

Aqueous zinc (Zn) ion batteries have received broad attention recently. However, their practical application is limited by severe Zn dendrite growth and the hydrogen evolution reaction. In this study, three alkali metal ions (Li+, Na+, and K+) are added in ZnSO4 electrolytes, which are subjected to electrochemical measurements and molecular dynamics simulations. The studies show that since K+ has the highest mobility and self-diffusion coefficient among the four ions (Li+, Na+, K+, and Zn2+), it enables K+ to preferentially approach a zinc dendrite at an earlier time, driven by a negative electric field during a cathodic process. The electric double layer, with K+ around the negatively charged Zn dendrite, inhibits dendrite growth and mitigates the hydrogen evolution reaction on the Zn anode. Under this kinetic effect, the Zn-Zn symmetric cell with K+ exhibits a long cycling stability of 1000 h at 1 mA·cm-2 of 1 mAh·cm-2 and 190 h at 30 mA·cm-2 of 2 mAh·cm-2. Such a kinetic effect is also observed with additives Na+ and Li+, though less profound than that of K+.

Porous CuO Microspheres as Long-Lifespan Cathode Materials for Aqueous Zinc-Ion Batteries

Cathode materials with conversion mechanisms for aqueous zinc-ion batteries (AZIBs) have shown a great potential as next-generation energy storage materials due to their high discharge capacity and high energy density. However, improving their cycling stability has been the biggest challenge plaguing researchers. In this study, CuO microspheres were prepared using a simple hydrothermal reaction, and the morphology and crystallinity of the samples were modulated by controlling the hydrothermal reaction time. The as-synthesized materials were used as cathode materials for AZIBs. The electrochemical experiments showed that the CuO-4h sample, undergoing a hydrothermal reaction for 4 h, had the longest lifecycle and the best rate of capability. A discharge capacity of 131.7 mAh g-1 was still available after 700 cycles at a current density of 500 mA g-1. At a high current density of 1.5 A g-1, the maintained capacity of the cell is 85.4 mA h g-1. The structural evolutions and valence changes in the CuO-4h cathode material were carefully explored by using ex situ XRD and ex situ XPS. CuO was reduced to Cu2O and Cu after the initial discharge, and Cu was oxidized to Cu2O instead of CuO during subsequent charging processes. We believe that these findings could introduce a novel approach to exploring high-performance cathode materials for AZIBs.

An ionically cross-linked composite hydrogel electrolyte based on natural biomacromolecules for sustainable zinc-ion batteries

Zinc-ion batteries (ZIBs) are regarded as promising power sources for flexible and biocompatible devices due to their good sustainability and high intrinsic safety. However, their applications have been hindered by the issues of uncontrolled Zn dendrite growth and severe water-induced side reactions in conventional liquid electrolytes. Herein, an ionically cross-linked composite hydrogel electrolyte based on natural biomacromolecules, including iota-carrageenan and sodium alginate, is designed to promote highly efficient and reversible Zn plating/stripping. The abundant functional groups of macromolecules effectively suppress the reactivity of water molecules and facilitate uniform Zn deposition. Moreover, the composite hydrogel electrolyte exhibits a high ionic conductivity of 5.89 × 10-2 S cm-1 and a Zn2+ transference number of 0.58. Consequently, the Zn‖Zn symmetric cell with the composite hydrogel electrolyte shows a stable cycle life of more than 500 h. Meanwhile, the Zn‖NH4V4O10 coin cell with the composite hydrogel electrolyte retains a high specific capacity of approximately 200 mA h g-1 after 600 cycles at 2 A g-1. The Zn‖NVO pouch cell based on the composite hydrogel electrolyte also shows a high specific capacity of 246.1 mA h g-1 at 0.5 A g-1 and retains 70.7% of its initial capacity after 150 cycles. The pouch cell performs well at different bending angles and exhibits a capacity retention rate of 98% after returning to its initial state from 180° folding. This work aims to construct high-performance hydrogel electrolytes using low-cost natural materials, which may provide a solution for the application of ZIBs in flexible biocompatible devices.

Analogous Confinement Effect Enables High Stability and High Capacity Ammonium Storage in Polyaniline@Poly(o-fluoroaniline)@Carbon Layer

Rechargeable aqueous ammonium ion (NH4 +) batteries have attracted much attention due to the unique properties of NH4 +. Polyaniline (PA) with outstanding conductivity is a potential cathode material, but it can be oxidized to pernigraniline (PG) rapidly, resulting in its poor stability. In this study, polyaniline@poly(o-fluoroaniline)@carbon layer (PA@POFA@C) is prepared for excellent and durable NH4 + storage. PA@POFA@C exhibits a high capacity of 208 mAh g-1 at 0.2 A g-1 and maintains 126 mAh g-1 at 10 A g-1. More importantly, an excellent capacity retention rate of 88.24% is achieved after 2000 cycles with ≈100% coulombic efficiency. Spectroscopy studies suggest analogous confinement effect can effectively limit the escape of hydrogen in imine group, and form the hydrogen-restricted region between the PA and POFA layer which can provide H+ for the complete reduction of PG. Meanwhile, the hydrophobic effect of POFA effectively restrains the hydrolysis of PG. Interestingly, the introduction of C layer improves the hydrophilicity of electrode and shortens the activation process, serving as the outermost protective layer of the electrode. Finally, PA@POFA@C achieves desirable electrochemical performances with analogous confinement effect. This research provides ideas for the preparation of advanced polymer electrodes for aqueous NH4 + batteries.

Suppressing Jahn-Teller distortion and locking lattice water with doped Fe(III) in birnessite toward fast and stable zinc-ion batteries

Birnessite has been regarded as a promising cathode material for aqueous zinc-ion batteries (ZIBs), but severe Jahn-Teller distortion and abrupt lattice collapse at deep charged states lead to serious problems such as poor capacity retention and short cycle life, which severely impede its practical applications. We herein report the construction of an advanced layered Fe-doped Na0.55Mn2O4·xH2O (Fe-NMO·xH2O) cathode to promote zinc-ion storage performance and electrochemical stability. An outstanding capacity of 102 mA h g-1 at a high current density of 20 A g-1 and a long cycle life of 6000 cycles have been achieved, comparable to the state-of-the-art manganese oxide-based cathodes. Both experimental measurements and theoretical calculations reveal that Fe3+ substitution and lattice water cooperatively stabilize the interlayer structure, accelerate zinc-ion diffusion, and improve electronic conductivity. Notably, Fe doping is conducive to alleviating the Jahn-Teller effect and locking lattice water, which effectively prevents phase transformation and lattice collapse during the (de)intercalation process. This work sheds light on the synergistic interplay between dopants and structural water in zinc-ion storage and demonstrates instructive strategies to regulate layered structures for ZIBs.

Oriented Metal Stripping for Highly Reversible Zinc Anode

Aqueous zinc metal batteries are a viable candidate for next-generation energy storage systems, but suffer from poor cycling efficiency of the Zn anode. Emerging approaches aim to regulate zinc plating behavior to suppress uncontrolled dendrites, while the stripping process is seldom considered. Herein, an oriented metal stripping strategy is demonstrated to stabilize the Zn anode by removing high-index facets for exposing the (002) plane through the addition of anionic additive sodium citrate (SC). Consequently, high-index facets that coordinate strongly with SC are preferentially stripped out due to a reduced stripping barrier, rendering stable (002) facet preponderant in epitaxial plating. After repeat stripping/plating, the ultra-high proportion of 93% for (002) and large-size grains of ≈100 µm (six times larger than before) can be obtained. Zn anode shows continuous 25 000 cycles with low overpotential at 100 mA cm-2 in symmetric cells and more than 70 h of stable operation even at an ultra-high depth of discharge of 92.3%. Moreover, an extremely long lifespan of 12 000 cycles at 10 A g-1 with a high capacity retention of 89% is achieved by the assembled Zn//I2 battery. This work provides a distinctive approach to improving the stripping process to design highly efficient zinc anodes for promising aqueous zinc metal batteries.

A self-regulated interface enabled by trivalent gadolinium ions toward highly reversible zinc metal anodes

Aqueous zinc-ion batteries (AZIBs) have become an ideal candidate for large-scale energy storage systems owing to their inherent safety and highly competitive capacity. However, severe dendrite growth and side reactions on the surface of zinc metal anodes lead to quick performance deterioration, seriously impeding the commercialization of AZIBs. In this work, a self-regulated zinc metal/electrolyte interface is constructed to solve these problems by incorporating the trivalent Gd3+ additive with a lower effective reduction potential into the aqueous ZnSO4 electrolyte. It is revealed that the inert Gd3+ ions preferentially adsorb on the active sites of the zinc anode, and the induced electrostatic shielding layer is beneficial to uniform Zn deposition. Meanwhile, the adsorbed Gd3+ ions act as a buffer interface to lower the direct contact of the zinc anode with water molecules, thereby suppressing the interfacial parasitic reaction. These features endow the Zn//Zn battery using 0.2 M Gd3+ ions with 2940 h of cycling life at 5 mA cm-2 and a cumulative plating capacity (CPC) of 6.2 Ah cm-2 at 40 mA cm-2. When assembling with a MnO2 cathode, the full cell using the modified electrolyte exhibits a high capacity of 268.9 mAh/g at 0.2 A/g, as well as improved rate capability and cycle stability. The results suggest the great potential of a rare earth ion additive in reinforcing Zn metal anodes for developing practical AZIBs.

Hydrophobic Two-Dimensional Layered Superstructure of a Polyoxometalate Cluster as the Cathode Material for Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries hold promise for sustainable energy storage, yet challenges in finding high-performance cathode materials persist. Polyoxovanadates (POVs) are emerging as potential candidates due to their structural diversity and robust redox activity. Despite their potential, issues like dissolution in electrolytes, structural degradation, and byproduct accumulation persist. This work introduces a POV-based hydrophobic two-dimensional (2D) layered superstructure that addresses these challenges. The hydrophobic nature minimizes POV dissolution, enhancing structural stability and inhibiting phase transitions during cycling. The 2D arrangement ensures a larger surface area and improved electronic conductivity, resulting in faster kinetics and higher specific capacity. The superstructure demonstrates improved cycle life and an increased operating voltage, marking a significant advancement in POV-based cathode materials for aqueous zinc-ion batteries.

Zn2+-storage mechanism in V6O13 with nanosheets for high-capacity and long-life aqueous zinc-metal batteries

V6O13 with a nanosheet structure was employed as a cathode material for aqueous zinc metal batteries. V6O13 delivered a high specific capacity of 425 mA h g-1, outstanding rate performance and durable cycling with high capacity retention of 86% after 3000 cycles. Moreover, in situ X-ray diffractometer (XRD), ex situ X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge structure (XANES) were employed to ascertain the reaction mechanism of Zn2+ storage.

Mass Transfer Limitation within Molecular Crowding Electrolyte Reorienting (100) and (101) Texture for Dendrite-Free Zinc Metal Batteries

Aqueous zinc metal batteries are emerging as a promising alternative for energy storage due to their high safety and low cost. However, their development is hindered by the formation of Zn dendrites and side reactions. Herein, a macromolecular crowding electrolyte (MCE40) is prepared by incorporating polyvinylpyrrolidone (PVP) into the aqueous solutions, exhibiting an enlarged electrochemical stability window and anti-freezing properties. Notably, through electrochemical measurements and characterizations, it is discovered that the mass transfer limitation near the electrode surface within the MCE40 electrolyte inhibits the (002) facets. This leads to the crystallographic reorientation of Zn deposition to expose the (100) and (101) textures, which undergo a "nucleation-merge-growth" process to form a uniform and compact Zn deposition. Consequently, the MCE40 enables highly reversible and stable Zn plating/stripping in Zn/Cu half cells over 600 cycles and in Zn/Zn symmetric cells for over 3000 hours at 1.0 mA cm-2. Furthermore, Na0.33V2O5/Zn and α-MnO2/Zn full cells display promising capacity and sustained stability over 500 cycles at room and sub-zero temperatures. This study highlights a novel electrochemical mechanism for achieving preferential Zn deposition, introducing a unique strategy for fabricating dendrite-free zinc metal batteries.

Electrode and Electrolyte Co-Energy-Storage Electrochemistry Enables High-Energy Zn-S Decoupled Batteries

In the search for next-generation green energy storage solutions, Cu-S electrochemistry has recently gained attraction from the battery community owing to its affordability and exceptionally high specific capacity of 3350 mAh gs -1. However, the inferior conductivity and substantial volume expansion of the S cathode hinder its cycling stability, while the low output voltage limits its energy density. Herein, a hollow carbon sphere (HCS) is synthesized as a 3D conductive host to achieve a stable S@HCS cathode, which enables an outstanding cycling performance of 2500 cycles (over 9 months). To address the latter, a Zn//S@HCS alkaline-acid decoupled cell is configured to increase the output voltage from 0.18 to 1.6 V. Moreover, an electrode and electrolyte co-energy storage mechanism is proposed to offset the reduction in energy density resulting from the extra electrolyte required in Zn//S decoupled cells. When combined, the Zn//S@HCS alkaline-acid decoupled cell delivers a record energy density of 334 Wh kg-1 based on the mass of the S cathode and CuSO4 electrolyte. This work tackles the key challenges of Cu-S electrochemistry and brings new insights into the rational design of decoupled batteries.

Engineering Covalent Organic Frameworks Toward Advanced Zinc-Based Batteries

Zinc-based batteries (ZBBs) have demonstrated considerable potential among secondary batteries, attributing to their advantages including good safety, environmental friendliness, and high energy density. However, ZBBs still suffer from issues such as the formation of zinc dendrites, occurrence of side reactions, retardation of reaction kinetics, and shuttle effects, posing a great challenge for practical applications. As promising porous materials, covalent organic frameworks (COFs) and their derivatives have rigid skeletons, ordered structures, and permanent porosity, which endow them with great potential for application in ZBBs. This review, therefore, provides a systematic overview detailing on COFs structure pertaining to electrochemical performance of ZBBs, following an in depth discussion of the challenges faced by ZBBs, which includes dendrites and side reactions at the anode, as well as dissolution, structural change, slow kinetics, and shuttle effect at the cathode. Then, the structural advantages of COF-correlated materials and their roles in various ZBBs are highlighted. Finally, the challenges of COF-correlated materials in ZBBs are outlined and an outlook on the future development of COF-correlated materials for ZBBs is provided. The review would serve as a valuable reference for further research into the utilization of COF-correlated materials in ZBBs.

Melanin for Photoprotection and Hair Coloration in the Emerging Era of Nanocosmetics

Nanotechnology is revolutionizing fields of high social and economic impact. such as human health preservation, energy conversion and storage, environmental decontamination, and art restoration. However, the possible global-scale application of nanomaterials is raising increasing concerns, mostly related to the possible toxicity of materials at the nanoscale. The possibility of using nanomaterials in cosmetics, and hence in products aimed to be applied directly to the human body, even just externally, is strongly debated. Preoccupation arises especially from the consideration that nanomaterials are mostly of synthetic origin, and hence are often seen as "artificial" and their effects as unpredictable. Melanin, in this framework, is a unique material since in nature it plays important roles that specific cosmetics are aimed to cover, such as photoprotection and hair and skin coloration. Moreover, melanin is mostly present in nature in the form of nanoparticles, as is clearly observable in the ink of some animals, like cuttlefish. Moreover, artificial melanin nanoparticles share the same high biocompatibility of the natural ones and the same unique chemical and photochemical properties. Melanin is hence a natural nanocosmetic agent, but its actual application in cosmetics is still under development, also because of regulatory issues. Here, we critically discuss the most recent examples of the application of natural and biomimetic melanin to cosmetics and highlight the requirements and future steps that would improve melanin-based cosmetics in the view of future applications in the everyday market.

Customization of Manganese Oxide Cathodes via Precise Electrochemical Lithium-Ion Intercalation for Diverse Zinc-Ion Batteries

Manganese oxide-based aqueous zinc-ion batteries (ZIBs) are attractive energy storage devices, owing to their good safety, low cost, and ecofriendly features. However, various critical issues, including poor conductivity, sluggish reaction kinetics, and unstable structure still restrict their further development. Oxygen defect engineering is an effective strategy to improve the electrochemical performance of manganese oxides, but challenging in the accurate regulation of oxygen defects. In this work, an effective and controllable defect engineering strategy-controllable electrochemical lithium-ion intercalation - is proposed to tackle this issue. The incorporation of lithium ions and oxygen defects can promote the conductivity, lattice spacing, and structural stability of Mn2O3 (MO), thus improving its capacity (232.7 mAh g-1), rate performance, and long-term cycling stability (99.0% capacity retention after 3000 cycles). Interestingly, the optimal ratio of intercalated lithium-ion varies at different temperature or mass-loading of MO, which provides the possibility to customize diverse ZIBs to meet different application conditions. In addition, the fabricated ZIBs present good flexibility, superior safety, and admirable adaptability under extreme temperatures (-20-100 °C). This work provides an inspiration on the structural customization of metal oxide nanomaterials for diverse ZIBs, and sheds light on the construction of future portable electronics.

Spontaneous Molecule Aggregation for Nearly Single-Ion Conducting Sol Electrolyte to Advance Aqueous Zinc Metal Batteries: The Case of Tetraphenylporphyrin

Zn metal as a promising anode of aqueous batteries faces severe challenges from dendrite growth and side reactions. Here, tetraphenylporphyrin tetrasulfonic acid (TPPS) is explored as an electrolyte additive for advanced Zn anodes. It is interesting to note that TPPS spontaneously assembles into unique aggregates. As they adsorb on the Zn anode, the aggregates enhance the resistance to electrolyte percolation and dendrite growth compared to single molecules. Meanwhile, TPPS facilitates anion association in the solvation sheath of Zn2+, and boosts the transference number of Zn2+ up to 0.95. Therefore, anion-related side reactions and anion-induced electrode overpotentials are reduced accordingly. In this context, the electrolyte containing TPPS exhibits excellent electrochemical performance. Even under a high loading of MnO2 (25 mg cm-2), a limited Zn supply (N/P ratio=1.7), and a lean electrolyte (15 μL mAh-1), the full cells still represent a higher cumulative capacity compared to the reported data. The advantages of this electrolyte are also adapted to other cathode materials. The pouch cells of Zn||NaV3O8 ⋅ 1.5H2O realize a capacity of ~0.35 Ah at 0.4 C under harsh conditions.

Highly reversible zinc metal anode enabled by strong Brønsted acid and hydrophobic interfacial chemistry

Uncontrollable zinc (Zn) plating and hydrogen evolution greatly undermine Zn anode reversibility. Previous electrolyte designs focus on suppressing H2O reactivity, however, the accumulation of alkaline byproducts during battery calendar aging and cycling still deteriorates the battery performance. Here, we present a direct strategy to tackle such problems using a strong Brønsted acid, bis(trifluoromethanesulfonyl)imide (HTFSI), as the electrolyte additive. This approach reformulates battery interfacial chemistry on both electrodes, suppresses continuous corrosion reactions and promotes uniform Zn deposition. The enrichment of hydrophobic TFSI- anions at the Zn|electrolyte interface creates an H2O-deficient micro-environment, thus inhibiting Zn corrosion reactions and inducing a ZnS-rich interphase. This highly acidic electrolyte demonstrates high Zn plating/stripping Coulombic efficiency up to 99.7% at 1 mA cm-2 ( > 99.8% under higher current density and areal capacity). Additionally, Zn | |ZnV6O9 full cells exhibit a high capacity retention of 76.8% after 2000 cycles.

Zn-based batteries for sustainable energy storage: strategies and mechanisms

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

Ultrastable Electrolytic Zn-I2 Batteries Based on Nanocarbon Wrapped by Highly Efficient Single-Atom Fe-NC Iodine Catalysts

Aqueous Zn-iodine (Zn-I2) conversion batteries with iodine redox chemistry suffers the severe polyiodide shuttling and sluggish redox kinetics, which impede the battery lifespan and rate capability. Herein, an ultrastable Zn-I2 battery is introduced based on single-atom Fe-N-C encapsulated high-surface-area carbon (HC@FeNC) as the core-shell cathode materials, which accelerate the I-/I3 -/I° conversion significantly. The robust chemical-physical interaction between polyiodides and Fe-N4 sites tightly binds the polyiodide ions and suppresses the polyiodide shuttling, thereby significantly enhancing the coulombic efficiency. As a result, the core-shell HC@FeNC cathode endows the electrolytic Zn-I2 battery with an excellent capacity, remarkable rate capability, and an ultralong lifespan over 60 000 cycles. More importantly, a practical 253 Wh kg-1 pouch cell shows good capacity retention of 84% after 100 cycles, underscoring its considerable potential for commercial Zn-I2 batteries.

Unveiling Phenoxazine's Unique Reversible Two-Electron Transfer Process and Stable Redox Intermediates for High-Performance Aqueous Zinc-ion Batteries

The low specific capacity determined by the limited electron transfer of p-type cathode materials is the main obstruction to their application towards high-performance aqueous zinc-ion batteries (ZIBs). To overcome this challenge, boosting multi-electron transfer is essential for improving the charge storage capacity. Here, as a typical heteroaromatic p-type material, we unveil the unique reversible two-electron redox properties of phenoxazine in the aqueous electrolytes for the first time. The second oxidation process is stabilized in the aqueous electrolytes, a notable contrast to its less reversibility in the non-aqueous electrolytes. A comprehensive investigation of the redox chemistry mechanism demonstrates remarkably stable redox intermediates, including a stable cation radical PNO⋅+ characterized by effective electron delocalization and a closed-shell state dication PNO2+. Meanwhile, the heightened aromaticity contributes to superior structural stability during the redox process, distinguishing it from phenazine, which features a non-equivalent hybridized sp2-N motif. Leveraging these synergistic advantages, the PNO electrodes deliver a high capacity of 215 mAh g-1 compared to other p-type materials, and impressive long cycling stability with 100 % capacity retention over 3500 cycles. This work marks a crucial step forward in advanced organic electrodes based on multi-electron transfer phenoxazine moieties for high-performance aqueous ZIBs.

A Multifunctional Additive Based on the Cation-Anion Synergistic Effect for Highly Stable Zinc Metal Anodes

The Zn dendrite and hydrogen evolution reaction have been a "stubborn illness" for the life span of zinc anodes, which significantly hinders the development of aqueous zinc batteries (AZBs). Herein, considering the ingenious molecular structure, a multifunctional additive based on the synergistic regulation of cations and anions at the interface is designed to promote a dendrite-free and stable Zn anode. Theoretical calculations and characterization results verified that the electrostatic shield effect of the cation, the solvation sheath structure, and the bilayer structural solid electrolyte film (SEI) jointly account for the uniform Zn deposition and side reaction suppression. Ultimately, a remarkably high average Coulombic efficiency (CE) of 99.4% is achieved in the Zn||Cu cell for 300 cycles, and a steady charge/discharge cycling over 3000 and 300 h at 1.0 mA cm-2/1.0 mAh cm-2 and 10 mA cm-2/10 mAh cm-2 is obtained in the Zn||Zn cell. Furthermore, the assembled full battery demonstrates a prolonged cycle life of 2000 cycles.

Aqueous Rechargeable Zn-Iodine Batteries: Issues, Strategies and Perspectives

The static aqueous rechargeable Zn-Iodine batteries (ARZiBs) have been studied extensively because of their low-cost, high-safety, moderate voltage output, and other unique merits. Nonetheless, the poor electrical conductivity and thermodynamic instability of the iodine cathode, the complicated conversion mechanism, and the severe interfacial reactions at the Zn anode side induce their low operability and unsatisfactory cycling stability. This review first clarifies the typical configuration of ARZiBs with a focus on the energy storage mechanism and uncovers the issues of the ARZiBs from a fundamental point of view. After that, it categorizes the recent optimization strategies into cathode fabrication, electrolyte modulation, and separator/anode modification; and summarizes and highlights the achieved progress of these strategies in advanced ARZiBs. Given that the ARZiBs are still at an early stage, the future research outlook is provided, which hopefully may guide the rational design of advanced ARZiBs.

Enhancing Zn2+ Storage Performance by Constructing the Interfaces Between VO2 and Co-N-C Layers

Vanadium oxides have aroused attention as cathode materials in aqueous zinc-ion batteries (AZIBs) due to their low cost and high safety. However, low ion diffusion and vanadium dissolution often lead to capacity decay and deteriorating stability during cycling. Herein, vanadium dioxides (VO2) nanobelts are coated with a single-atom cobalt dispersed N-doped carbon (Co-N-C) layer via a facile calcination strategy to form Co-N-C layer coated VO2 nanobelts (VO2@Co-N-C NBs) for cathodes in AZIBs. Various in-/ex situ characterizations demonstrate the interfaces between VO2 layers and Co-N-C layers can protect the VO2 NBs from collapsing, increase ion diffusion, and enhance the Zn2+ storage performance. Additional density functional theory (DFT) simulations demonstrate that Co─O─V bonds between VO2 and Co-N-C layers can enhance interfacial Zn2+ storage. Moreover, the VO2@Co-N-C NBs provided an ultrahigh capacity (418.7 mAh g-1 at 1 A g-1), outstanding long-term stability (over 8000 cycles at 20 A g-1), and superior rate performance.

Engineering Low-Cost Organic Cathode for Aqueous Rechargeable Battery and Demonstrating the Proton Intercalation Mechanism for Pyrazine Energy Storage Unit

Seeking organic cathode materials with low cost and long cycle life that can be employed for large-scale energy storage remains a significant challenge. This work has synthesized an organic compound, triphenazino[2,3-b](1,4,5,8,9,12-hexaazatriphenylene) (TPHATP), with as high as 87.16% yield. This compound has a highly π-conjugated and rigid molecular structure, which is synthesized by capping hexaketocyclohexane with three molecules of 2,3-diaminophenazine derived from low-cost o-phenylenediamine, and is used as a cathode material for assembling aqueous rechargeable zinc ion batteries. Both experiments and DFT calculations demonstrate that the redox mechanism of TPHATP is predominantly governed by H+ storage. The Zn-intercalation product of nitride-type compound, is too unstable to form in water. Moreover, the TPHATP cathode exhibits a capacity of as high as 318.3 mAh g-1 at 0.1 A g-1, and maintained a stable capacity of 111.9 mAh g-1 at a large current density of 10 A g-1 for 5000 cycles with only a decay of 0.000512% per cycle. This study provides new insights into understanding pyrazine as an active redox group and offers a potential affordable aqueous battery system for grid-scale energy storage.

Converting Commercial Zn Foils into Single (002)-Textured Zn with Millimeter-Sized Grains for Highly Reversible Aqueous Zinc Batteries

Rechargeable aqueous zinc batteries are promising but hindered by unfavorable dendrite growth and side reactions on zinc anodes. In this study, we demonstrate a fast melting-solidification approach for effectively converting commercial Zn foils into single (002)-textured Zn featuring millimeter-sized grains. The melting process eliminates initial texture, residual stress, and grain size variations in diverse commercial Zn foils, guaranteeing the uniformity of commercial Zn foils into single (002)-textured Zn. The single (002)-texture ensures large-scale epitaxial and dense Zn deposition, while the reduction in grain boundaries significantly minimizes intergranular reactions. These features enable large grain single (002)-textured Zn shows planar and dense Zn deposition under harsh conditions (100 mA cm-2, 100 mAh cm-2), impressive reversibility in Zn||Zn symmetric cell (3280 h under 1 mA cm-2, 830 h under 10 mAh cm-2), and long cycling stability over 180 h with a high depth of discharge value of 75 %. This study successfully addresses the issue of uncontrollable texture formation in Zn foils following routine annealing treatments with temperatures below the Zn melting point. The findings of this study establish a highly efficient strategy for fabricating highly reversible single (002)-textured Zn anodes.

Maltodextrin as a Commercial-Grade Electrolyte Additive Against Dendrite Formation and Side Reactions for Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) directly using zinc metal anodes are promising candidates for grid-scale energy storage systems due to their intrinsic high theoretical capacity, high safety, and environmental friendliness. However, the uncontrolled dendrite growth and water-triggered side reactions seriously plague its practical application. Herein, a cost-effective and green additive, maltodextrin (MD) is presented, to simultaneously guide the smooth Zn deposition and inhibit the occurrence of water-related side reactions. Combing experimental characterizations and theoretical calculations shows that the MD molecules could reconstruct the Helmholtz plane, induces a preferential growth of zinc along the (002) plane, and the optimized regulation of the Zn2+ diffusion path and deposition location also results in the formation of fine-grained Zn deposition layers, thereby inhibiting dendrite growth. In addition, MD molecules readily adsorb to the zinc anode surface, which isolates water molecules from direct contact with the zinc metal, reducing hydrogen precipitation reactions and inhibiting the formation of by-products. Consequently, the Zn||Zn symmetric cell with MD achieves ultra-long stable cycles of up to 5430 h at 1 mA cm-2 and 1 mA h cm-2, and the Cu||Zn asymmetric cell can stable cycle 1000 cycles with an average coulomb efficiency of 99.78%.

Multifunctional Cellulose Nanocrystals Electrolyte Additive Enable Ultrahigh-Rate and Dendrite-Free Zn Anodes for Rechargeable Aqueous Zinc Batteries

The design of aqueous zinc (Zn) chemistry energy storage with high rate-capability and long serving life is a great challenge due to its inhospitable coordination environment and dismal interfacial chemistry. To bridge this big gap, herein, we build a highly reversible aqueous Zn battery by taking advantages of the biomass-derived cellulose nanocrystals (CNCs) electrolyte additive with unique physical and chemical characteristics simultaneously. The CNCs additive not only serves as fast ion carriers for enhancing Zn2+ transport kinetics but regulates the coordination environment and interface chemistry to form dynamic and self-repairing protective interphase, resulting in building ultra-stable Zn anodes under extreme conditions. As a result, the engineered electrolyte system achieves a superior average coulombic efficiency of 97.27 % under 140 mA cm-2, and steady charge-discharge for 982 h under 50 mA cm-2, 50 mAh cm-2, which proposes a universal pathway to challenge aqueous Zn chemistry in green, sustainable, and large-scale applications.

Three-Phase-Heterojunction Cu/Cu2O-Sb2O3 Catalyst Enables Efficient CO2 Electroreduction to CO and High-Performance Aqueous Zn-CO2 Battery

Zn-CO2 batteries are excellent candidates for both electrical energy output and CO2 utilization, whereas the main challenge is to design electrocatalysts for electrocatalytic CO2 reduction reactions with high selectivity and low cost. Herein, the three-phase heterojunction Cu-based electrocatalyst (Cu/Cu2O-Sb2O3-15) is synthesized and evaluated for highly selective CO2 reduction to CO, which shows the highest faradaic efficiency of 96.3% at -1.3 V versus reversible hydrogen electrode, exceeding the previously reported best values for Cu-based materials. In situ spectroscopy and theoretical analysis indicate that the Sb incorporation into the three-phase heterojunction Cu/Cu2O-Sb2O3-15 nanomaterial promotes the formation of key *COOH intermediates compared with the normal Cu/Cu2O composites. Furthermore, the rechargeable aqueous Zn-CO2 battery assembled with Cu/Cu2O-Sb2O3-15 as the cathode harvests a peak power density of 3.01 mW cm-2 as well as outstanding cycling stability of 417 cycles. This research provides fresh perspectives for designing advanced cathodic electrocatalysts for rechargeable Zn-CO2 batteries with high-efficient electricity output together with CO2 utilization.

Janus Binder Chemistry for Synchronous Enhancement of Iodine Species Adsorption and Redox Kinetics toward Sustainable Aqueous Zn-I2 Batteries

Currently, the desired research focus in energy storage technique innovation has been gradually shifted to next-generation aqueous batteries holding both high performance and sustainability. However, aqueous Zn-I2 batteries have been deemed to have great sustainable potential, owing to the merits of cost-effective and eco-friendly nature. However, their commercial application is hindered by the serious shuttle effect of polyiodides during reversible operations. In this work, a Janus functional binder based on chitosan (CTS) molecules was designed and prepared; the polar terminational groups impart excellent mechanical robustness to hybrid binders; meanwhile, it can also deliver isochronous enhancement on physical adsorption and redox kinetics toward I2 species. By feat of highly effective remission to shuttle effect, the CTS cell exhibits superb electrochemical storage capacities with long-term robustness, specifically, 144.1 mAh g-1, at a current density of 0.2 mA g-1 after 1500 cycles. Simultaneously, the undesired self-discharging issue could be also well-addressed; the Coulombic efficiency could remain at 98.8 % after resting for 24 h. More importantly, CTS molecules endow good biodegradability and reusable properties; after iodine species were reloaded, the recycled devices could also deliver specific capacities of 73.3 mAh g-1, over 1000 cycles. This Janus binder provides a potential synchronous solution to realize high comprehensive performance with high iodine utilization and further make it possible for sustainable Zn-I2 batteries.

Unraveling the "Gap-Filling" Mechanism of Multiple Charge Carriers in Aqueous Zn-MoS2 Batteries

The utilization rate of active sites in cathode materials for Zn-based batteries is a key factor determining the reversible capacities. However, a long-neglected issue of the strong electrostatic repulsions among divalent Zn2+ in hosts inevitably causes the squander of some active sites (i.e., gap sites). Herein, we address this conundrum by unraveling the "gap-filling" mechanism of multiple charge carriers in aqueous Zn-MoS2 batteries. The tailored MoS2 /(reduced graphene quantum dots) hybrid features an ultra-large interlayer spacing (2.34 nm), superior electrical conductivity/hydrophilicity, and robust layered structure, demonstrating highly reversible NH4 + /Zn2+ /H+ co-insertion/extraction chemistry in the 1 M ZnSO4 +0.5 M (NH4 )2 SO4 aqueous electrolyte. The NH4 + and H+ ions can act as gap fillers to fully utilize the active sites and screen electrostatic interactions to accelerate the Zn2+ diffusion. Thus, unprecedentedly high rate capability (439.5 and 104.3 mAh g-1 at 0.1 and 30 A g-1 , respectively) and ultra-long cycling life (8000 cycles) are achieved.

The Compatibility of COFs Cathode and Optimized Electrolyte for Ultra-Long Lifetime Rechargeable Aqueous Zinc-Ion Battery

Rechargeable aqueous zinc-ion batteries (RAZIBs) are attractive due to their affordability, safety, and eco-friendliness. However, their potential is limited by the lack of high-capacity cathodes and compatible electrolytes needed for reliable performance. Herein, we have presented a compatibility strategy for the development of a durable and long-lasting RAZIBs. The covalent organic frameworks (COFs) based on anthraquinone (DAAQ-COF) is created and utilized as the cathode, with zinc metal serving as the anode. The electrolyte is made up of an aqueous solution containing zinc salts at various concentrations. The COF cathode has been designed to be endowed with a rich array of redox-active groups, enhancing its electrochemical properties. Meanwhile, the electrolyte is formulated using triflate anions, which have exhibited superiority over sulfate anions. This strategy lead to the development of an optimized COF cathode with fast charging capability, high Coulombic efficiency (nearly 100 %) and long-term cyclability (retention rate of nearly 100 % at 1 A g-1 after 10000 cycles). Moreover, through experimental analysis, a co-insertion mechanism involving Zn2+ and H+ in this cathode is discovered for the first time. These findings represent a promising path for the advancement of organic cathode materials in high-performance and sustainable RAZIBs.

Oxygen Vacancies on NH4 V4 O10 Accelerate Ion and Charge Transfer in Aqueous Zinc-Ion Batteries

Vanadium-based compounds are identified as promising cathode materials for aqueous zinc ion batteries due to their high specific capacity. However, the low intrinsic conductivity and sluggish Zn2+ diffusion kinetics seriously impede their further practical application. Here, oxygen vacancies on NH4 V4 O10 is reported as a high-performing cathode material for aqueous zinc ion batteries via a facile hydrothermal strategy. The introduction of oxygen vacancy accelerates the ion and charge transfer kinetics, reduces the diffusion barrier of zinc ions, and establishes a stable crystal structure during zinc ion (de-intercalation). As a result, the oxygen vacancy enriched NH4 V4 O10 exhibits a high specific capacity of ≈499 mA h g-1 at 0.2 A g-1 , an excellent rate capability of 296 mA h g-1 at 10 A g-1 and the specific capacity cycling stability with 95.1% retention at 5 A g-1 for 4000 cycles, superior to the NVO sample (186.4 mAh g-1 at 5 A g-1 , 66% capacity retention).

An Electrochemically Initiated Self-Limiting Hydrogel Electrolyte for Dendrite-Free Zinc Anode

The zinc dendrite growth generally relies upon a "positive-feedback" mode, where the fast-grown tips receive higher current densities and ion fluxes. In this study, a self-limiting polyacrylamide (PAM) hydrogel that presents negative feedback to dendrite growth is developed. The monomers are purposefully polymerized at the dendrite tips, then the hydrogel reduces the local current density and ion flux by limiting zinc ion diffusion with abundant functional groups. As a consequence, the accumulation at the dendrite tips is restricted, and the (002) facets-oriented deposition is achieved. Moreover, the refined porous structure of the gel enhances Coulombic Efficiency by reducing water activity. Due to the synergistic effects, the zinc anodes perform an ultralong lifetime of 5100 h at 0.5 mA cm-2 and 1500 h at 5 mA cm-2, which are among the best records for PAM-based gel electrolytes. Further, the hydrogel significantly prolongs the lifespan of zinc-ion batteries and capacitors by dozens of times. The developed in situ hydrogel presents a feasible and cost-effective way to commercialize zinc anodes and provides inspiration for future research on dendrite suppression using the negative-feedback mechanism.

Overcoming Challenges: Extending Cycle Life of Aqueous Zinc-Ion Batteries at High Zinc Utilization through a Synergistic Strategy

Aqueous zinc-ion batteries (AZIBs) face challenges in achieving high energy density compared to conventional lithium-ion batteries (LIBs). The lower operating voltage and excessive Zn metal as anode pose constraints on the overall energy storage capacity of these batteries. An effective approach is to reduce the thickness of the Zn metal anode and control its mass appropriately. However, under the condition of using a thin Zn anode, the performance of AZIBs is often unsatisfactory. Through experiments and computational simulations, the electrode structural change and the formation of dead Zn as the primary reasons for the failure of batteries under a high Zn utilization rate are identified. Based on this understanding, a universal synergistic strategy that combines Cu foil current collectors and electrolyte additives to maintain the structural and thermodynamic stability of the Zn anode under a high Zn utilization rate (ZUR) is proposed. Specifically, the Cu current collectors can ensure that the Zn anode structure remains intact based on the spontaneous filling effect, while the additives can suppress parasitic side reactions at the interface. Ultimately, the symmetric cell demonstrates a cycling duration of 900 h at a 70% ZU, confirming the effectiveness of this strategy.

Three-dimensional Ordered Macroporous Flexible Electrode Design toward High-Performance Zinc-Ion Batteries

Flexible zinc-ion batteries (ZIBs) have been considered to have huge potential in portable and wearable electronics due to their high safety, cost efficiency, and considerable energy density. Therein, the design and construction of flexible electrodes significantly determine the performance and lifespan of flexible battery devices. In this work, an ultrathin flexible three-dimensional ordered macroporous (3DOM) Sn@Zn anode (60 μm in thickness) is presented to relieve dendrite growth and expand the lifespan of flexible ZIBs. The 3DOM structure can ensure uniform electric field distribution, guide oriented zinc plating/stripping, and extend the lifespan of anodes. The rich zincophilic Sn sites on the electrode surface significantly facilitate Zn nucleation. Accordingly, a lowered nucleation overpotential of 8.9 mV and an ultralong cycling performance of 2400 h at 0.1 mA cm-2 and 0.1 mAh cm-2 are achieved in symmetric cells, and the 3DOM Sn@Zn anode can also operate in deep cycling for over 200 h at 10 mA cm-2 and 5 mAh cm-2. A flexible 3DOM MnO2/Ni cathode with a high structural stability and a high mass-specific capacity is fabricated to match with the anode to form a flexible ZIB with a total thickness of 200 μm. The flexible device delivers a high volumetric energy density of 11.76 mWh cm-3 at 100 mA gMnO2-1 and a high average open-circuit voltage of 1.5 V and exhibits high-performance power supply under deformation in practical application scenarios. This work may shed some light on the design and fabrication of flexible energy-storage devices.

A Double-ligand Chelating Strategy to Iron Complex Anolytes with Ultrahigh Cyclability for Aqueous Iron Flow Batteries

Aqueous all-iron flow batteries (AIFBs) are attractive for large-scale and long-term energy storage due to their extremely low cost and safety features. To accelerate commercial application, a long cyclable and reversible iron anolyte is expected to address the critical barriers, namely iron dendrite growth and hydrogen evolution reaction (HER). Herein, we report a robust iron complex with triethanolamine (TEA) and 2-methylimidazole (MM) double ligands. By introducing two ligands into one iron center, the binding energy of the complex increases, making it more stable in the charge-discharge reactions. The Fe(TEA)MM complex achieves reversible and stable redox between Fe3+ and Fe2+ , without metallic iron growth and HER. AIFBs based on this anolyte perform a high energy efficiency of 80.5 % at 80 mA cm-2 and exhibit a record durability among reported AIFBs. The efficiency and capacity retain nearly 100 % after 1,400 cycles. The capital cost of this AIFB is $ 33.2 kWh-1 (e.g., 20 h duration), cheaper than Li-ion battery and vanadium flow battery. This double-ligand chelating strategy not only solves the current problems faced by AIFBs, but also provides an insight for further improving the cycling stability of other flow batteries.

Facilitating the Electrochemical Oxidation of ZnS through Iodide Catalysis for Aqueous Zinc-Sulfur Batteries

Aqueous zinc-sulfur (Zn-S) batteries show great potential for unlocking high energy and safety aqueous batteries. Yet, the sluggish kinetic and poor redox reversibility of the sulfur conversion reaction in aqueous solution challenge the development of Zn-S batteries. Here, we fabricate a high-performance Zn-S battery using highly water-soluble ZnI2 as an effective catalyst. In situ experimental characterizations and theoretical calculations reveal that the strong interaction between I- and the ZnS nanoparticles (discharge product) leads to the atomic rearrangement of ZnS, weakening the Zn-S bonding, and thus facilitating the electrochemical oxidation reaction of ZnS to S. The aqueous Zn-S battery exhibited a high energy density of 742 Wh kg(sulfur) -1 at the power density of 210.8 W kg(sulfur) -1 and good cycling stability over 550 cycles. Our findings provide new insights about the iodide catalytic effect for cathode conversion reaction in Zn-S batteries, which is conducive to promoting the future development of high-performance aqueous batteries.

Unlatching the Additional Zinc Storage Ability of Vanadium Nitride Nanocrystallites

Vanadium-based materials, due to their diverse valence states and open-framework lattice, are promising cathodes for aqueous zinc ion batteries (AZIBs), but encounters the major challenges of in situ electrochemical activation process, potent polarity of the aqueous electrolyte and periodic expansion/contraction for efficient Zn2+ storage. Herein, architecting vanadium nitride (VN) nanosheets over titanium-based hollow nanoarrays skeletal host (denoted VNTONC) can simultaneously modulate address those challenges by creating multiple interfaces and maintaining the (1 1 1) phase of VN, which optimizes the Zn2+ storage and the stability of VN. Benefiting from the modulated crystalline thermodynamics during the electrochemical activation of VN, two outcomes are achieved; I) the cathode transforms into a nanocrystalline structure with increased active sites and higher conductivity and; II) a significant portion of the (1 1 1) crystal facets is retained in the process leading to the additional Zn2+ storage capacity. As a result, the as-prepared VNTONC electrode demonstrates remarkable discharge capacities of 802.5 and 331.8 mAh g-1 @ 0.5 and 6.0 A g-1 , respectively, due to the enhanced kinetics as validated by theoretical calculations. The assembled VNTONC||Zn flexible ZIB demonstrates excellent Zn storage properties up to 405.6 mAh g-1 , and remarkable robustness against extreme operating conditions.

A Sustainable Dual Cross-Linked Cellulose Hydrogel Electrolyte for High-Performance Zinc-Metal Batteries

Aqueous rechargeable Zn-metal batteries (ARZBs) are considered one of the most promising candidates for grid-scale energy storage. However, their widespread commercial application is largely plagued by three major challenges: The uncontrollable Zn dendrites, notorious parasitic side reactions, and sluggish Zn2+ ion transfer. To address these issues, we design a sustainable dual cross-linked cellulose hydrogel electrolyte, which has excellent mechanical strength to inhibit dendrite formation, high Zn2+ ions binding capacity to suppress side reaction, and abundant porous structure to facilitate Zn2+ ions migration. Consequently, the Zn||Zn cell with the hydrogel electrolyte can cycle stably for more than 400 h under a high current density of 10 mA cm-2. Moreover, the hydrogel electrolyte also enables the Zn||polyaniline cell to achieve high-rate and long-term cycling performance (> 2000 cycles at 2000 mA g-1). Remarkably, the hydrogel electrolyte is easily accessible and biodegradable, making the ARZBs attractive in terms of scalability and sustainability.

Versatile MXenes for Aqueous Zinc Batteries

Aqueous zinc-ion batteries (AZIBs) are gaining popularity for their cost-effectiveness, safety, and utilization of abundant resources. MXenes, which possess outstanding conductivity, controllable surface chemistry, and structural adaptability, are widely recognized as a highly versatile platform for AZIBs. MXenes offer a unique set of functions for AZIBs, yet their significance has not been systematically recognized and summarized. This review article provides an up-to-date overview of MXenes-based electrode materials for AZIBs, with a focus on the unique functions of MXenes in these materials. The discussion starts with MXenes and their derivatives on the cathode side, where they serve as a 2D conductive substrate, 3D framework, flexible support, and coating layer. MXenes can act as both the active material and a precursor to the active material in the cathode. On the anode side, the functions of MXenes include active material host, zinc metal surface protection, electrolyte additive, and separator modification. The review also highlights technical challenges and key hurdles that MXenes currently face in AZIBs.

Zincophilic Metal-Organic-Framework Interface Mitigating Dendrite Growth for Highly Reversible Zinc Metal Batteries

Aqueous Zn-ion batteries are the ideal candidate for large-scale energy storage systems owing to their high safety and low cost. However, the uncontrolled deposition and parasitic reaction of Zn metal anode hinder their commercial application. Here, the 2D metal-organic-framework (MOF) nanoflakes covered on the surface of Zn are proposed to enable dendrite-free for long lifespan Zn metal batteries. The MOF can facilitate the desolvation process to accelerate reaction kinetic due to its special channel structure. The abundant zincopilicity sites of MOF can realize the homogenous Zn2+ deposition. Consequently, their synergetic effect makes the MOF protected Zn anode good electrochemical performance with a long cycle life of 1400 h at 1 mA cm-2 and a high depth of discharge of 30 mAh cm-2 (DOD ≈ 54%) continued for over 700 h. This work provides a novel strategy for high-performance rechargeable Zn-ion batteries.

Recent development of manganese dioxide-based materials as zinc-ion battery cathode

The development of advanced cathode materials for zinc-ion batteries (ZIBs) is a critical step in building large-scale green energy conversion and storage systems in the future. Manganese dioxide is one of the most well-studied cathode materials for zinc-ion batteries due to its wide range of crystal forms, cost-effectiveness, and well-established synthesis processes. This review describes the recent research progress of manganese dioxide-based ZIBs, and the reaction mechanism, electrochemical performance, and challenges of manganese dioxide-based ZIBs materials are systematically introduced. Optimization strategies for high-performance manganese dioxide-based materials for ZIBs with different crystal forms, nanostructures, morphologies, and compositions are discussed. Finally, the current challenges and future research directions of manganese dioxide-based cathodes in ZIBs are envisaged.

Janus interface enables reversible Zn-ion battery by regulating interfacial water structure and crystal-orientation

To tackle the shortcomings of traditional battery systems, there has been much focus on aqueous Zn-ion batteries due to various advantages. However, they still suffer from poor stability of Zn anodes. Here, a methionine additive with unique Janus properties is proposed to regulate the behavior of the interface between Zn anodes and the electrolyte environment. Systematic characterizations as well as calculations elucidate that the Janus additive is adsorbed on the Zn anode via zincophilic -NH2, changing the structure of the electric double layer and breaking the hydrogen bonding network among H2O molecules through hydrophobic S-CH3. At the same time, it can induce preferential formation of Zn(101) with high reversibility. The above two functions contribute to the dendrite inhibiting ability of Zn anodes. As validated, fabricated Zn//Zn symmetric cells achieve stable cycles of 4500 h, 1165 h, and 318 h at 1, 5 and 10 mA cm-2/mA h cm-2, respectively. Furthermore, Zn//Cu asymmetric cells with an average coulombic efficiency of 98.9% for 2200 stable cycles can be realized. Finally, Zn//MnO2 full cells exhibit 79.9% capacity retention with an ultra-high coulombic efficiency of 99.9% for 1000 cycles, much better than that of the pure Zn(ClO4)2 system, indicating the great potential of this useful strategy in aqueous batteries.

Boosting H+ Storage in Aqueous Zinc Ion Batteries via Integrating Redox-Active Sites into Hydrogen-Bonded Organic Frameworks with Strong π-π Stacking

In the emerging aqueous zinc ion batteries (AZIBs), proton (H+ ) with the smallest molar mass and fast (de)coordination kinetics is considered as the most ideal charge carrier compared with Zn2+ counterpart, however, searching for new hosting materials for H+ storage is still at its infancy. Herein, redox-active hydrogen-bonded organic frameworks (HOFs) assembled from diaminotriazine moiety decorated hexaazatrinnphthalene (HOF-HATN) are for the first time developed as the stable cathode hosting material for boosting H+ storage in AZIBs. The unique integration of hydrogen-bonding networks and strong π-π stacking endow it rapid Grotthuss proton conduction, stable supramolecular structure and inclined H+ storage. As a consequence, HOF-HATN displays a high capacity (320 mAh g-1 at 0.05 A g-1 ) and robust cyclability of (>10000 cycles at 5 A g-1 ) based on three-step cation coordination storage. These findings get insight into the proton transport and storage behavior in HOFs and provide the molecular engineering strategy for constructing well-defined cathode hosting materials for rechargeable aqueous batteries.

Interface engineering of heterostructured vanadium oxides for enhanced energy storage in Zinc-Ion batteries

Rechargeable aqueous Zn-ion batteries (RAZIBs) with the merits of cost effectiveness and high safety have been rejuvenated as tantalizing energy storage systems to meet the demand for grid-scale applications. Currently, the energy storage capability of the positive electrode (cathode) holds the key for the overall performance of RAZIBs. In this work, we reveal VO2, V10O24·12H2O (HVO), and VO2/HVO can be prepared via hydrothermal reaction by using different reducing agents. VO2 exhibits high capacity of 237 mAh/g at 4 A/g, while it suffers from quick capacity decay with 48 % retention after 2000 charge/discharge cycles. On the contrary, HVO demonstrates moderate capacity but meritorious cycle stability (i.e., 173 mAh/g at 4 A/g and 82 % after 2000 cycles). By integrating the merits of high-capacity VO2 and high-stability HVO, the biphasic VO2/HVO sample exhibits promising electrochemical performance with high capacity (317 and 239 mAh/g at 1 and 4 A/g, respectively) and good cycle stability (80 % after 2000 cycles). As examined by band structure analysis, the superior electrochemical performance of VO2/HVO is attributed to the presence of a heterojunction between VO2 and HVO enabling a built-in electric field to boost electron transport kinetics, leading to high attainable capacity and reliable cycle performance in RAZIBs.

Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures

Aqueous zinc metal batteries (AZMBs) are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc (Zn) metal. However, several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries (AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

ZnO Additive Boosts Charging Speed and Cycling Stability of Electrolytic Zn-Mn Batteries

Electrolytic aqueous zinc-manganese (Zn-Mn) batteries have the advantage of high discharge voltage and high capacity due to two-electron reactions. However, the pitfall of electrolytic Zn-Mn batteries is the sluggish deposition reaction kinetics of manganese oxide during the charge process and short cycle life. We show that, incorporating ZnO electrolyte additive can form a neutral and highly viscous gel-like electrolyte and render a new form of electrolytic Zn-Mn batteries with significantly improved charging capabilities. Specifically, the ZnO gel-like electrolyte activates the zinc sulfate hydroxide hydrate assisted Mn2+ deposition reaction and induces phase and structure change of the deposited manganese oxide (Zn2Mn3O8·H2O nanorods array), resulting in a significant enhancement of the charge capability and discharge efficiency. The charge capacity increases to 2.5 mAh cm-2 after 1 h constant-voltage charging at 2.0 V vs. Zn/Zn2+, and the capacity can retain for up to 2000 cycles with negligible attenuation. This research lays the foundation for the advancement of electrolytic Zn-Mn batteries with enhanced charging capability.