Amorphous Boron Carbide on Titanium Dioxide Nanobelt Arrays for High-Efficiency Electrocatalytic NO Reduction to NH3

Ag@TiO2 nanoribbon array: a high-performance sensor for electrochemical non-enzymatic glucose detection in beverage sample

Developing an accurate, cost-effective, reliable, and stable glucose detection sensor for the food industry poses a significant yet challenging endeavor. Herein, we present a silver nanoparticle-decorated titanium dioxide nanoribbon array on titanium plate (Ag@TiO2/TP) as an efficient electrode for non-enzymatic glucose detection in alkaline environments. Electrochemical evaluations of the Ag@TiO2/TP electrode reveal a broad linear response range (0.001 mM - 4 mM), high sensitivity (19,106 and 4264 μA mM-1 cm-2), rapid response time (6 s), and a notably low detection limit (0.18 μM, S/N = 3). Moreover, its efficacy in measuring glucose in beverage samples shows its practical applicability. The impressive performance and structural benefits of the Ag@TiO2/TP electrode highlight its potential in advancing electrochemical sensors for small molecule detection.

Highly Efficient One-pot Electrosynthesis of Oxime Ethers from NOx over Ultrafine MgO Nanoparticles Derived from Mg-based Metal-Organic Frameworks

Oxime ethers are attractive compounds in medicinal scaffolds due to the biological and pharmaceutical properties, however, the crucial and widespread step of industrial oxime formation using explosive hydroxylamine (NH2OH) is insecure and troublesome. Herein, we present a convenient method of oxime ether synthesis in a one-pot tandem electrochemical system using magnesium based metal-organic framework-derived magnesium oxide anchoring in self-supporting carbon nanofiber membrane catalyst (MgO-SCM), the in situ produced NH2OH from nitrogen oxides electrocatalytic reduction coupled with aldehyde to produce 4-cyanobenzaldoxime with a selectivity of 93 % and Faraday efficiency up to 65.1 %, which further reacted with benzyl bromide to directly give oxime ether precipitate with a purity of 97 % by convenient filtering separation. The high efficiency was attributed to the ultrafine MgO nanoparticles in MgO-SCM, effectively inhibiting hydrogen evolution reaction and accelerating the production of NH2OH, which rapidly attacked carbonyl of aldehydes to form oximes, but hardly crossed the hydrogenation barrier of forming amines, thus leading to a high yield of oxime ether when coupling benzyl bromide nucleophilic reaction. This work highlights the importance of kinetic control in complex electrosynthetic organonitrogen system and demonstrates a green and safe alternative method for synthesis of organic nitrogen drug molecules.

Facile Construction of CuFe-Based Metal Phosphides for Synergistic NOx -Reduction to NH3 and Zn-Nitrite Batteries in Electrochemical Cell

The electrocatalytic nitrite/nitrate reduction reaction (eNO2RR/eNO3RR) offer a promising route for green ammonia production. The development of low cost, highly selective and long-lasting electrocatalysts for eNO2RR/eNO3RR is challenging. Herein, a method is presented for constructing Cu3P-Fe2P heterostructures on iron foam (CuFe-P/IF) that facilitates the effective conversion of NO2 - and NO3 - to NH3. At -0.1 and -0.2 V versus RHE (reversible hydrogen electrode), CuFe-P/IF achieves a Faradaic efficiency (FE) for NH3 production of 98.36% for eNO2RR and 72% for eNO3RR, while also demonstrating considerable stability across numerous cycles. The superior performance of CuFe-P/IF catalyst is due tothe rich Cu3P-Fe2P heterstuctures. Density functional theory calculations have shed light on the distinct roles that Cu3P and Fe2P play at different stages of the eNO2RR/eNO3RR processes. Fe2P is notably active in the early stages, engaging in the capture of NO2 -/NO3 -, O─H formation, and N─OH scission. Conversely, Cu3P becomes more dominant in the subsequent steps, which involve the formation of N─H bonds, elimination of OH* species, and desorption of the final products. Finally, a primary Zn-NO2 - battery is assembled using CuFe-P/IF as the cathode catalyst, which exhibits a power density of 4.34 mW cm-2 and an impressive NH3 FE of 96.59%.

A two-dimensional covalent organic framework with single-atom manganese for electrochemical NO reduction: a computational study

Covalent organic frameworks (COFs) exhibit great potential for electrocatalysis. Here, using DFT calculations and constant-potential modelling, we report the feasibility of a series of COFs toward NO reduction via regulating their central metal atoms and linking ligands. A COF with single-atom Mn is identified to possess superior activity while maintaining high NH3 selectivity.

Efficient Hydrogen Generation from Ammonia Borane Hydrolysis on a Tandem Ruthenium-Platinum-Titanium Catalyst

Hydrolysis of ammonia borane (NH3BH3, AB) involves multiple undefined steps and complex adsorption and activation, so single or dual sites are not enough to rapidly achieve the multi-step catalytic processes. Designing multi-site catalysts is necessary to enhance the catalytic performance of AB hydrolysis reactions but revealing the matching reaction mechanisms of AB hydrolysis is a great challenge. In this work, we propose to construct RuPt-Ti multi-site catalysts to clarify the multi-site tandem activation mechanism of AB hydrolysis. Experimental and theoretical studies reveal that the multi-site tandem mode can respectively promote the activation of NH3BH3 and H2O molecules on the Ru and Pt sites as well as facilitate the fast transfer of *H and the desorption of H2 on Ti sites at the same time. RuPt-Ti multi-site catalysts exhibit the highest turnover frequency (TOF) of 1293 min-1 for AB hydrolysis reaction, outperforming the single-site Ru, dual-site RuPt and Ru-Ti catalysts. This study proposes a multi-site tandem concept for accelerating the dehydrogenation of hydrogen storage material, aiming to contribute to the development of cleaner, low-carbon, and high-performance hydrogen production systems.

Surface-Diffusion-Induced Amorphization of Pt Nanoparticles over Ru Oxide Boost Acidic Oxygen Evolution

Phase transformation offers an alternative strategy for the synthesis of nanomaterials with unconventional phases, allowing us to further explore their unique properties and promising applications. Herein, we first observed the amorphization of Pt nanoparticles on the RuO2 surface by in situ scanning transmission electron microscopy. Density functional theory calculations demonstrate the low energy barrier and thermodynamic driving force for Pt atoms transferring from the Pt cluster to the RuO2 surface to form amorphous Pt. Remarkably, the as-synthesized amorphous Pt/RuO2 exhibits 14.2 times enhanced mass activity compared to commercial RuO2 catalysts for the oxygen evolution reaction (OER). Water electrolyzer with amorphous Pt/RuO2 achieves 1.0 A cm-2 at 1.70 V and remains stable at 200 mA cm-2 for over 80 h. The amorphous Pt layer not only optimized the *O binding but also enhanced the antioxidation ability of amorphous Pt/RuO2, thereby boosting the activity and stability for the OER.

Selective Electrocatalytic Conversion of Nitric Oxide to High Value-Added Chemicals

The artificial disturbance in the nitrogen cycle has necessitated an urgent need for nitric oxide (NO) removal. Electrochemical technologies for NO conversion have gained increasing attention in recent years. This comprehensive review presents the recent advancements in selective electrocatalytic conversion of NO to high value-added chemicals, with specific emphasis on catalyst design, electrolyte composition, mass diffusion, and adsorption energies of key intermediate species. Furthermore, the review explores the synergistic electrochemical co-electrolysis of NO with specific carbon source molecules, enabling the synthesis of a range of valuable chemicals with C─N bonds. It also provides in-depth insights into the intricate reaction pathways and underlying mechanisms, offering valuable perspectives on the challenges and prospects of selective NO electrolysis. By advancing comprehension and fostering awareness of nitrogen cycle balance, this review contributes to the development of efficient and sustainable electrocatalytic systems for the selective synthesis of valuable chemicals from NO.

Carbon Support Enhanced Mass Transfer and Metal-Support Interaction Promoted Activation for Low-Concentrated Nitric Oxide Electroreduction to Ammonia

The electrochemical NO reduction reaction (NORR) is a promising approach for both nitrogen cycle regulation and ammonia synthesis. Due to the relatively low concentration of the NO source and poor solubility of NO in solution, mass transfer limitation is a serious but easily overlooked issue. In this work, porous carbon-supported ultrafine Cu clusters grown on Cu nanowire arrays (defined as Cu@Cu/C NWAs) are prepared for low-concentration NORR. A high Faradaic efficiency (93.0%) and yield rate (1180.5 μg h-1 cm-2) of ammonia are realized on Cu@Cu/C NWAs at -0.1 V vs a reversible hydrogen electrode (RHE), which are far superior to those of Cu NWAs and other reported performances under similar conditions. The construction of a porous carbon support can effectively decrease the NO diffusion kinetics and promote NO coverage for subsequent highly effective conversion. Moreover, the favorable metal-support interaction between ultrafine Cu clusters and carbon support enhances the adsorption of NO and decreases the barrier for *HNO formation in comparison with that of pure Cu NWAs. Overall, the whole NORR can be fully strengthened on Cu@Cu/C NWAs at low NO concentrations.

Electrochemical Nitrate Reduction: Ammonia Synthesis and the Beyond

Natural nitrogen cycle has been severely disrupted by anthropogenic activities. The overuse of N-containing fertilizers induces the increase of nitrate level in surface and ground waters, and substantial emission of nitrogen oxides causes heavy air pollution. Nitrogen gas, as the main component of air, has been used for mass ammonia production for over a century, providing enough nutrition for agriculture to support world population increase. In the last decade, researchers have made great efforts to develop ammonia processes under ambient conditions to combat the intensive energy consumption and high carbon emission associated with the Haber-Bosch process. Among different techniques, electrochemical nitrate reduction reaction (NO3RR) can achieve nitrate removal and ammonia generation simultaneously using renewable electricity as the power, and there is an exponential growth of studies in this research direction. Here, a timely and comprehensive review on the important progresses of electrochemical NO3RR, covering the rational design of electrocatalysts, emerging CN coupling reactions, and advanced energy conversion and storage systems is provided. Moreover, future perspectives are proposed to accelerate the industrialized NH3 production and green synthesis of chemicals, leading to a sustainable nitrogen cycle via prosperous N-based electrochemistry.

Identification of Cu(111) as Superior Active Sites for Electrocatalytic NO Reduction to NH3 with High Single-Pass Conversion Efficiency

Opting for NO as an N source in electrocatalytic NH3 synthesis presents an intriguing approach to tackle energy and environmental challenges. However, blindly pursuing high NH3 synthesis rates and Faradaic efficiency (FE) while ignoring the NO conversion ratio could result in environmental problems. Herein, Cu nanosheets with exposed (111) surface is fabricated and exhibit a NO-to-NH3 yield rate of 371.89 μmol cm-2  h-1 (flow cell) and the highest FE of 93.19±1.99 % (H-type cell). The NO conversion ratio is increased to the current highest value of 63.74 % combined with the development of the flow cell. Additionally, Crystal Orbital Hamilton Population (COHP) clearly reveals that the "σ-π* acceptance-donation" is the essence of the interaction between the Cu and NO as also supported by operando attenuated total reflection infrared spectroscopy (ATR-IRAS) in observing the key intermediate of NO- . This work not only achieves a milestone NO conversion ratio for electrocatalytic NO-to-NH3 , but also proposes a new descriptor that utilizes orbital hybridization between molecules and metal centers to accurately identify the real active sites of catalysts.

RhNi Bimetallenes with Lattice-Compressed Rh Skin towards Ultrastable Acidic Nitrate Electroreduction

Harvesting recyclable ammonia (NH3 ) from acidic nitrate (NO3 - )-containing wastewater requires the utilization of corrosion-resistant electrocatalytic materials with high activity and selectivity towards acidic electrochemical nitrate reduction (NO3 ER). Herein, ultrathin RhNi bimetallenes with Rh-skin-type structure (RhNi@Rh BMLs) are fabricated towards acidic NO3 ER. The Rh-skin atoms on the surface of RhNi@Rh BMLs experience the lattice compression-induced strain effect, resulting in shortened Rh-Rh bond and downshifted d-band center. Experimental and theoretical calculation results corroborate that Rh-skin atoms can inhibit NO2 */NH2 * adsorption-induced Rh dissolution, contributing to the exceptional electrocatalytic durability of RhNi@Rh BMLs (over 400 h) towards acidic NO3 ER. RhNi@Rh BMLs also reveal an excellent catalytic performance, boasting a 98.4% NH3 Faradaic efficiency and a 13.4 mg h-1 mgcat -1 NH3 yield. Theoretical calculations reveal that compressive stress tunes the electronic structure of Rh skin atoms, which facilitates the reduction of NO* to NOH* in NO3 ER. The practicality of RhNi@Rh BMLs has also been confirmed in an alkaline-acidic hybrid zinc-nitrate battery with a 1.39 V open circuit voltage and a 10.5 mW cm-2 power density. This work offers valuable insights into the nature of electrocatalyst deactivation behavior and guides the development of high-efficiency corrosion-resistant electrocatalysts for applications in energy and environment.

Aqueous Electroreduction of Nitric Oxide to Ammonia at Low Concentration via Vacancy Engineered FeOCl

Electroreduction of nitric oxide (NO) to NH3 (NORR) has gained extensive attention for the sake of low carbon emission and air pollutant treatment. Unfortunately, NORR is greatly hindered by its sluggish kinetics, especially under low concentrations of NO. Herein, we developed a chlorine (Cl) vacancy strategy to overcome this limitation over FeOCl nanosheets (FeOCl-VCl ). Density functional theory (DFT) calculations revealed that the Cl vacancy resulted in defective Fe with sharp d-states characteristics in FeOCl-VCl to enhance the absorption and activation of NO. In situ X-ray absorption near-edge structure (XANES) and attenuated total reflection-infrared spectroscopy (ATR-IR) verified the lower average oxidation state of defective Fe to enhance the electron transfer for NO adsorption/activation and facilitate the generation of key NHO and NHx intermediates. As a result, the FeOCl-VCl exhibited superior NORR activities with the NH3 Faradaic efficiency up to 91.1 % while maintaining a high NH3 yield rate of 455.4 μg cm-2  h-1 under 1.0 vol % NO concentration, competitive with those of previously reported literatures under higher NO concentration. Further, the assembled Zn-NO battery utilizing FeOCl-VCl as cathode delivered a record peak power density of 6.2 mW cm-2 , offering a new route for simultaneous NO removal, NH3 production, and energy supply.

Constructing molecule-metal relay catalysis over heterophase metallene for high-performance rechargeable zinc-nitrate/ethanol batteries

Zinc-nitrate batteries can integrate energy supply, ammonia electrosynthesis, and sewage disposal into one electrochemical device. However, current zinc-nitrate batteries still severely suffer from the limited energy density and poor rechargeability. Here, we report the synthesis of tetraphenylporphyrin (tpp)-modified heterophase (amorphous/crystalline) rhodium-copper alloy metallenes (RhCu M-tpp). Using RhCu M-tpp as a bifunctional catalyst for nitrate reduction reaction (NO3RR) and ethanol oxidation reaction in neutral solution, a highly rechargeable and low-overpotential zinc-nitrate/ethanol battery is successfully constructed, which exhibits outstanding energy density of 117364.6 Wh kg-1cat, superior rate capability, excellent cycling stability of ~400 cycles, and potential ammonium acetate production. Ex/in situ experimental studies and theoretical calculations reveal that there is a molecule-metal relay catalysis in NO3RR over RhCu M-tpp that significantly facilitates the ammonia selectivity and reaction kinetics via a low energy barrier pathway. This work provides an effective design strategy of multifunctional metal-based catalysts toward the high-performance zinc-based hybrid energy systems.

Formamide Electrosynthesis from Methanol and Ammonia in Water over Pr-Doped MnO2

A rare earth element doping strategy is reported to boost the activity and enhance the stability of MnO2 for selective formamide production through electrocatalytic oxidation coupling (EOC) of methanol and ammonia. MnO2 doped with 1% Pr was selected as the best candidate with an optimized formamide yield of 211.32 μmol cm-2 h-1, a Faradaic efficiency of 22.63%, and a stability of more than 50 h. The easier formation of Mn6+ species and the lower dissolution rate of Mn species over Pr-doped MnO2 revealed by in situ Raman spectra were responsible for the boosted formamide production and enhanced stability. In addition, a two-electrode flow electrolyzer was developed to integrate EOC with C2H2 semihydrogenation for simultaneously producing value-added products in both the anode and cathode.

How Amorphous Nanomaterials Enhanced Electrocatalytic, SERS, and Mechanical Properties

There is ever-growing research interest in nanomaterials because of the unique properties that emerge on the nanometer scale. While crystalline nanomaterials have received a surge of attention for exhibiting state-of-the-art properties in various fields, their amorphous counterparts have also attracted attention in recent years owing to their unique structural features that crystalline materials lack. In short, amorphous nanomaterials only have short-range order at the atomic scale, and their atomic packing lacks long-range periodic arrangement, in which the coordinatively unsaturated environment, isotropic atomic structure, and modulated electron state all contribute to their outstanding performance in various applications. Given their intriguing characteristics, we herein present a series of representative works to elaborate on the structural advantages of amorphous nanomaterials as well as their enhanced electrocatalytic, surface-enhanced Raman scattering (SERS), and mechanical properties, thereby elucidating the underlying structure-function relationship. We hope that this proposed relationship will be universally applicable, thus encouraging future work in the design of amorphous materials that show promising performance in a wide range of fields.

Electrochemical Reversible Reforming between Ethylamine and Acetonitrile on Heterostructured Pd-Ni(OH)2 Nanosheets

Rational design of electrocatalysts is essential to achieve desirable performance of electrochemical synthesis process. Heterostructured catalysts have thus attracted widespread attention due to their multifunctional intrinsic properties, and diverse catalytic applications with corresponding outstanding activities. Here, we report an in situ restoration strategy for the synthesis of ultrathin Pd-Ni(OH)2 nanosheets. Such Pd-Ni(OH)2 nanosheets exhibit excellent activity and selectivity towards reversible electrochemical reforming of ethylamine and acetonitrile. In the acetonitrile reduction process, Pd acts as reaction center, while Ni(OH)2 provide proton hydrogen through promoting the dissociation of water. Also ethylamine oxidation process can be achieved on the surface of the heterostructured nanosheets with abundant Ni(II) defects. More importantly, an electrolytic cell driven by solar cells was successfully constructed to realize ethylamine-acetonitrile reversible reforming. This work demonstrates the importance of heterostructure engineering in the rational synthesis of multifunctional catalysts towards electrochemical synthesis of fine chemicals.

Oxygen-Bridged Copper-Iron Atomic Pair as Dual-Metal Active Sites for Boosting Electrocatalytic NO Reduction

Electrocatalytic reduction of nitric oxide (NO) to ammonia (NH3 ) is a promising approach to NH3 synthesis. However, due to the lack of efficient electrocatalysts, the performance of electrocatalytic NO reduction reaction (NORR) is far from satisfactory. Herein, it is reported that an atomic copper-iron dual-site electrocatalyst bridged by an axial oxygen atom (OFeN6 Cu) is anchored on nitrogen-doped carbon (CuFe DS/NC) for NORR. The CuFe DS/NC can significantly enhance the electrocatalytic NH3 synthesis performance (Faraday efficiency, 90%; yield rate, 112.52 µmol cm-2  h-1 ) at -0.6 V versus RHE, which is dramatically higher than the corresponding Cu single-atom, Fe single-atom and all NORR single-atom catalysts in the literature so far. Moreover, an assembled proof-of-concept Zn-NO battery using CuFe DS/NC as the cathode outputs a power density of 2.30 mW cm-2 and an NH3 yield of 45.52 µg h-1  mgcat -1 . The theoretical calculation result indicates that bimetallic sites can promote electrocatalytic NORR by changing the rate-determining step and accelerating the protonation process. This work provides a flexible strategy for efficient sustainable NH3 synthesis.

Fundamentals, rational catalyst design, and remaining challenges in electrochemical NOx reduction reaction

Nitrogen oxides (NOx) emissions carry pernicious consequences on air quality and human health, prompting an upsurge of interest in eliminating them from the atmosphere. The electrochemical NOx reduction reaction (NOxRR) is among the promising techniques for NOx removal and potential conversion into valuable chemical feedstock with high conversion efficiency while benefiting energy conservation. However, developing efficient and stable electrocatalysts for NOxRR remains an arduous challenge. This review provides a comprehensive survey of recent advancements in NOxRR, encompassing the underlying fundamentals of the reaction mechanism and rationale behind the design of electrocatalysts using computational modeling and experimental efforts. The potential utilization of NOxRR in a Zn-NOx battery is also explored as a proof of concept for concurrent NOx abatement, NH3 synthesis, and decarbonizing energy generation. Despite significant strides in this domain, several hurdles still need to be resolved in developing efficient and long-lasting electrocatalysts for NOx reduction. These possible means are necessary to augment the catalytic activity and electrocatalyst selectivity and surmount the challenges of catalyst deactivation and corrosion. Furthermore, sustained research and development of NOxRR could offer a promising solution to the urgent issue of NOx pollution, culminating in a cleaner and healthier environment.

Continuous NO Upcycling into Ammonia Promoted by SO2 in Flue Gas: Poison Can Be a Gift

Although ammonia (NH3) synthesis efficiency from the NO reduction reaction (NORR) is significantly promoted in recent years, one should note that NO is one of the major air pollutants in the flue gas. The limited NO conversion ratio is still the key challenge for the sustainable development of the NORR route, which potentially contributes more to contaminant emissions rather than its upcycling. Herein, we provide a simple but effective approach for continuous NO reduction into NH3, promoted by coexisting SO2 poison as a gift in the flue gas. It is significant to discover that SO2 plays a decisive role in elevating the capacity of NO absorption and reduction. A unique redox pair of SO2-NO is constructed, which contributes to the exceptionally high conversion ratio for both NO (97.59 ± 1.42%) and SO2 (99.24 ± 0.49%) in a continuous flow. The ultrahigh selectivity for both NO-to-NH3 upcycling (97.14 ± 0.55%) and SO2-to-SO42- purification (92.44 ± 0.71%) is achieved synchronously, demonstrating strong practicability for the value-added conversion of air contaminants. The molecular mechanism is revealed by comprehensive in situ technologies to identify the essential contribution of SO2 to NO upcycling. Besides, realistic practicality is realized by the efficient product recovery and resistance ability against various poisoning effects. The proposed strategy in this work not only achieves a milestone efficiency for NH3 synthesis from the NORR but also raises great concerns about contaminant resourcing in realistic conditions.

Boron-Modulated Electronic-Configuration Tuning of Cobalt for Enhanced Nitric Oxide Fixation to Ammonia

Electrocatalytic nitric oxide reduction (eNORR) to ammonia (NH3) provides an environmental route to alleviate NO pollution and yield great-value chemicals. The evolution of eNORR has been primarily hindered, however, by the poor reaction kinetics and low solubility of the NO in aqueous electrolytes. Herein, we have rationally designed a cobalt-based composite with a heterostructure as a highly efficient eNORR catalyst. In addition, by integrating boron to modulate the electronic structure, the catalyst CoB/Co@C delivered a significant NH3 yield of 315.4 μmol h-1 cm-2 for eNORR and an outstanding power density of 3.68 mW cm-2 in a Zn-NO battery. The excellent electrochemical performance of CoB/Co@C is attributed to the enrichment of NO by cobalt and boron dual-site adsorption and fast charge-transfer kinetics. It is demonstrated that the boron is pivotal in the enhancement of NO, the suppression of hydrogen evolution, and Co oxidation to boost eNORR performance.

Defective TiO2- x for High-Performance Electrocatalytic NO Reduction toward Ambient NH3 Production

Synthesis of green ammonia (NH₃ ) via electrolysis of nitric oxide (NO) is extraordinarily sustainable, but multielectron/proton-involved hydrogenation steps as well as low concentrations of NO can lead to poor activities and selectivities of electrocatalysts. Herein, it is reported that oxygen-defective TiO₂ nanoarray supported on Ti plate (TiO_{2- x} /TP) behaves as an efficient catalyst for NO reduction to NH₃ . In 0.2 m phosphate-buffered electrolyte, such TiO_{2- x} /TP shows competitive electrocatalytic NH₃ synthesis activity with a maximum NH₃ yield of 1233.2 µg h^-1  cm^-2 and Faradaic efficiency of 92.5%. Density functional theory calculations further thermodynamically faster NO deoxygenation and protonation processes on TiO_{2- x} (101) compared to perfect TiO₂ (101). And the low energy barrier of 0.7 eV on TiO_{2- x} (101) for the potential-determining step further highlights the greatly improved intrinsic activity. In addition, a Zn-NO battery is fabricated with TiO_{2- x} /TP and Zn plate to obtain an NH₃ yield of 241.7 µg h^-1  cm^-2 while providing a peak power density of 0.84 mW cm^-2 .

Single atomic cerium sites anchored on nitrogen-doped hollow carbon spheres for highly selective electroreduction of nitric oxide to ammonia

Electrocatalytic nitric oxide reduction reaction (NORR) at ambient environments not only offers a promising strategy to yield ammonia (NH₃) but also degrades the NO contaminant; however, its application depends on searching for high-performance catalysts. Herein, we present single atomic Ce sites anchored on nitrogen-doped hollow carbon spheres that are capable of electro-catalyzing NO reduction to NH₃ in an acidic solution, achieving a maximal Faradaic efficiency of 91 % and a yield rate of 1023 μg h^-1 mg_cat.^-1 at -0.7 V vs RHE for NH₃ formation, both of which outperform these on Ce nanoclusters and approach the best-reported results. Meanwhile, the single atomic Ce catalyst shows good structural and electrochemical stability during the 30-h NO electrolysis. Furthermore, when the single atomic Ce catalyst was used as cathodic material in a proof-of-concept of Zn-NO battery, it delivers a maximal power density of 3.4 mW cm^-2 and a high NH₃ yield rate of 309 μg h^-1 mg_cat.^-1. Theoretical simulations suggest that the Ce-N4 active moiety can not only activate NO molecules via a strong electronic interaction but also reduce the free energy barrier of *NO transition to *NOH intermediate as the limiting step, and therefore boosting the NORR kinetics and suppressing the competitive hydrogen evolution.

Upcycling air pollutants to fuels and chemicals via electrochemical reduction technology

The intensification of fossil fuel usage results in significant air pollution levels. Efforts have been put into developing efficient technologies capable of converting air pollution into valuable products, including fuels and valuable chemicals (e.g., CO₂ to hydrocarbon and syngas and NO_x to ammonia). Among the strategic efforts to mitigate the excessive concentration of CO₂ and NO_x pollutants in the atmosphere, the electrochemical reduction technology of CO₂ (CO₂RR) and NO_x (NO_xRR) emerges as one of the most promising approaches. It is even more attractive if CO₂RR and NO_xRR are paired with renewables to store intermittent electricity in the form of chemical feedstocks. This review provides an overview of the electrochemical reduction process to convert CO₂ to C₁ and/or C₂₊ chemicals and NO_x to ammonia (NH₃) with a focus on electrocatalysts, electrolytes, electrolyzer, and catalytic reactor designs toward highly selective electrochemical conversion of the desired products. While the attempts in these aspects are enormous, economic consideration and environmental feasibility for actual implementation are not comprehensively provided. We discuss CO₂RR and NO_xRR from the life cycle and techno-economic analyses to perceive the feasibility of the current achievements. The remaining challenges associated with the industrial implementation of electrochemical CO₂ and NO_x reduction are additionally provided.

Efficient electrochemical NO reduction to NH3 over metal-free g-C3N4 nanosheets and the role of interface microenvironment

The ever-increasing NO emission has caused severe environmental issues and adverse effects on human health. Electrocatalytic reduction is regarded as a win-win technology for NO treatment with value-added NH₃ generation, but the process is mainly relied on the metal-containing electrocatalysts. Here, we developed metal-free g-C₃N₄ nanosheets (deposited on carbon paper, named as CNNS/CP) for NH₃ synthesis from electrochemical NO reduction under ambient condition. The CNNS/CP electrode afforded excellent NH₃ yield rate of 15.1 μmol h^-1 cm^-2 (2180.1 mg g_cat^-1 h^-1) and Faradic efficiency (FE) of ∼41.5 % at - 0.8 and - 0.6 V_RHE, respectively, which were superior to the block g-C₃N₄ particles and comparable to the most of metal-containing catalysts. Moreover, through adjusting the interface microenvironment of CNNS/CP electrode by hydrophobic treatment, the abundant gas-liquid-solid triphasic interface improved NO mass transfer and availability, which enhanced NH₃ production and FE to about 30.7 μmol h^-1 cm^-2 (4424.2 mg g_cat^-1 h^-1) and 45.6 % at potential of - 0.8 V_RHE. This study opens a novel pathway to develop efficient metal-free electrocatalysts for NO electroreduction and highlights the importance of electrode interface microenvironment in electrocatalysis.

Beyond Purification: Highly Efficient and Selective Conversion of NO into Ammonia by Coupling Continuous Absorption and Photoreduction under Ambient Conditions

Although the selective catalytic reduction technology has been confirmed to be effective for nitrogen oxide (NO_x) removal, green and sustainable NO_x re-utilization under ambient conditions is still a great challenge. Herein, we develop an on-site system by coupling the continuous chemical absorption and photocatalytic reduction of NO in simulated flue gas (C_NO = 500 ppm, GHSV = 18,000 h^-1), which accomplishes an exceptional NO conversion into value-added ammonia with competitive conversion efficiency (89.05 ± 0.71%), ammonia production selectivity (95.58 ± 0.95%), and ammonia recovery efficiency (>90%) under ambient conditions. The anti-poisoning capacities, including the resistance against factors of H₂O, SO₂, and alkali/alkaline/heavy metals, are also achieved, which presents strong environmental practicability for treating NO_x in flue gas. In addition, the critical roles of corresponding chemical absorption and catalytic reduction components are also revealed by in situ characterizations. The emerging strategy herein not only achieves a milestone efficiency for sustainable NO purification but also opens a new route for contaminant resourcing in the near future of carbon neutrality.

Hexagonal Cobalt Nanosheets for High-Performance Electrocatalytic NO Reduction to NH3

Electrocatalytic nitric oxide (NO) reduction not only provides an extremely promising strategy for ambient NH₃ generation but also alleviates the artificially disrupted N-cycle balance. However, exploring efficient electrocatalysts to enhance the NO electroreduction performance remains a significant challenge. Herein, a hexagonal-close-packed Co nanosheet (hcp-Co) is prepared and exhibits a high NH₃ yield of 439.50 μmol cm^-2 h^-1 and a Faraday efficiency of 72.58%, outperforming the face-centered cubic phase of the Co nanosheet (fcc-Co) and most reported electrocatalysts. Through the combination of density functional theory calculations and NO temperature-programmed desorption experiments, the superior catalytic NO reduction reaction (NORR) activity on the hcp-Co can be attributed to the unique electron structures and proton shuttle effect. A proof-of-concept device of Zn-NO batteries using the hcp-Co as the cathode is assembled and shows a power density of 4.66 mW cm^-2, which is superior to the reported performance in the literature so far.

Self-Tandem Electrocatalytic NO Reduction to NH3 on a W Single-Atom Catalyst

We design single-atom W confined in MoO_3-x amorphous nanosheets (W₁/MoO_3-x) comprising W₁-O₅ motifs as a highly active and durable NORR catalyst. Theoretical and operando spectroscopic investigations reveal the dual functions of W₁-O₅ motifs to (1) facilitate the activation and protonation of NO molecules and (2) promote H₂O dissociation while suppressing *H dimerization to increase the proton supply, eventually resulting in a self-tandem NORR mechanism of W₁/MoO_3-x to greatly accelerate the protonation energetics of the NO-to-NH₃ pathway. As a result, W₁/MoO_3-x exhibits the highest NH₃-Faradaic efficiency of 91.2% and NH₃ yield rate of 308.6 μmol h^-1 cm^-2, surpassing that of most previously reported NORR catalysts.

Self-Supported Pd Nanorod Arrays for High-Efficient Nitrate Electroreduction to Ammonia

Electrochemical nitrate (NO₃ ^- ) reduction to ammonia (NH₃ ) offers a promising pathway to recover NO₃ ^- pollutants from industrial wastewater that can balance the nitrogen cycle and sustainable green NH₃ production. However, the efficiency of electrocatalytic NO₃ ^- reduction to NH₃ synthesis remains low for most of electrocatalysts due to complex reaction processes and severe hydrogen precipitation reaction. Herein, high performance of nitrate reduction reaction (NO₃ ^- RR) is demonstrated on self-supported Pd nanorod arrays in porous nickel framework foam (Pd/NF). It provides a lot of active sites for H* adsorption and NO₃ ^- activation leading to a remarkable NH₃ yield rate of 1.52 mmol cm^-2  h^-1 and a Faradaic efficiency of 78% at -1.4 V versus RHE. Notably, it maintains a high NH₃ yield rate over 50 cycles in 25 h showing good stability. Remarkably, large-area Pd/NF electrode (25 cm² ) shows a NH₃ yield of 174.25 mg h^-1 , be promising candidate for large-area device for industrial application. In situ FTIR spectroscopy and density functional theory calculations analysis confirm that the enrichment effect of Pd nanorods encourages the adsorption of H species for ammonia synthesis following a hydrogenation mechanism. This work brings a useful strategy for designing NO₃ ^- RR catalysts of nanorod arrays with customizable compositions.

Isolated Electron-Rich Ruthenium Atoms in Intermetallic Compounds for Boosting Electrochemical Nitric Oxide Reduction to Ammonia

The direct electrochemical nitric oxide reduction reaction (NORR) is an attractive technique for converting NO into NH₃ with low power consumption under ambient conditions. Optimizing the electronic structure of the active sites can greatly improve the performance of electrocatalysts. Herein, we prepare body-centered cubic RuGa intermetallic compounds (i.e., bcc RuGa IMCs) via a substrate-anchored thermal annealing method. The electrocatalyst exhibits a remarkable NH₄ ⁺ yield rate of 320.6 μmol h^-1  mg^-1 _Ru with the corresponding Faradaic efficiency of 72.3 % at very low potential of -0.2 V vs. reversible hydrogen electrode (RHE) in neutral media. Theoretical calculations reveal that the electron-rich Ru atoms in bcc RuGa IMCs facilitate the adsorption and activation of *HNO intermediate. Hence, the energy barrier of the potential-determining step in NORR could be greatly reduced.

Electrocatalytic NO Reduction to NH3 on Mo2C Nanosheets

Electrocatalytic reduction of NO to NH₃ (NORR) emerges as a promising route for achieving harmful NO treatment and sustainable NH₃ generation. In this work, we first report that Mo₂C is an active and selective NORR catalyst. The developed Mo₂C nanosheets deliver a high NH₃ yield rate of 122.7 μmol h^-1 cm^-2 with an NH₃ Faradaic efficiency of 86.3% at -0.4 V. Theoretical computations unveil that the surface-terminated Mo atoms on Mo₂C can effectively activate NO, promote protonation energetics, and suppress proton adsorption, resulting in high NORR activity and selectivity of Mo₂C.

Single-Step Synthesis of Fe-Fe3 O4 Catalyst for Highly Efficient and Selective Electrochemical Nitrogen Reduction

Nitrogen reduction electrocatalysts are highly attractive for catalytic science. However, most electrocatalysts are limited by their low faradaic efficiency, poor ammonia yield, and tedious and costly catalyst synthesis process. In this work, Fe-based oxide composite nanoparticles with steady chemical states are prepared by a single-step green procedure under ambient conditions. The resulting Fe-Fe₃ O₄ demonstrates remarkable activity and selectivity for nitrogen reduction reaction (NRR) with the highest faradaic efficiency of 53.2±1.8 % and NH₃ yield rate of 24.6±0.8 μg h^-1  mg_cat. ^-1 at -0.4 V (vs. RHE) in 0.1 m Na₂ SO₄ electrolyte. Characterization experiments and theoretical calculation reveal that Fe-Fe₃ O₄ exhibits significantly enhanced charge transfer capability and suppresses the competitive HER process.

In Situ Derived Co2B Nanosheet Array: A High-Efficiency Electrocatalyst for Ambient Ammonia Synthesis via Nitrate Reduction

Ambient ammonia synthesis via electrochemical nitrate (NO3-) reduction is regarded as a green alternative to the Haber-Bosch process. Herein, we report the in situ derivation of an amorphous Co2B layer on a Co3O4 nanosheet array on a Ti mesh (Co2B@Co3O4/TM) for efficient NH3 production via selective electroreduction of NO3- under ambient conditions. In 0.1 M PBS and 0.1 M NaNO3, Co2B@Co3O4/TM exhibits a maximum Faradaic efficiency of 97.0% at -0.70 V and a remarkable NH3 yield of 8.57 mg/h/cm2 at -1.0 V, with durability for stable NO3--to-NH3 conversion over eight recycling tests and 12 h of electrolysis. Additionally, it can be applied as an efficient cathode material for Zn-NO3- batteries to produce NH3 while generating electricity. The catalytic mechanisms on Co2B@Co3O4 are further revealed by theoretical calculations.

Emerging p-Block-Element-Based Electrocatalysts for Sustainable Nitrogen Conversion

Artificial nitrogen conversion reactions, such as the production of ammonia via dinitrogen or nitrate reduction and the synthesis of organonitrogen compounds via C-N coupling, play a pivotal role in the modern life. As alternatives to the traditional industrial processes that are energy- and carbon-emission-intensive, electrocatalytic nitrogen conversion reactions under mild conditions have attracted significant research interests. However, the electrosynthesis process still suffers from low product yield and Faradaic efficiency, which highlight the importance of developing efficient catalysts. In contrast to the transition-metal-based catalysts that have been widely studied, the p-block-element-based catalysts have recently shown promising performance because of their intriguing physiochemical properties and intrinsically poor hydrogen adsorption ability. In this Perspective, we summarize the latest breakthroughs in the development of p-block-element-based electrocatalysts toward nitrogen conversion applications, including ammonia electrosynthesis from N₂ reduction and nitrate reduction and urea electrosynthesis using nitrogen-containing feedstocks and carbon dioxide. The catalyst design strategies and the underlying reaction mechanisms are discussed. Finally, major challenges and opportunities in future research directions are also proposed.

In Situ Growth of Fe2O3 Nanorod Arrays on Carbon Cloth with Rapid Charge Transfer for Efficient Nitrate Electroreduction to Ammonia

Electrochemical reduction of nitrate to ammonia (NH3), a green NH3 production route upon combining with renewable energy sources, is an appealing and alternative method to the Haber-Bosch process. However, this process not only involves the complicated eight-electron reduction to transform nitrate into various nitrogen products but simultaneously suffers from the competitive hydrogen evolution reaction, challenged by a lack of efficient catalysts. Herein, the in situ growth of Fe2O3 nanorod arrays on carbon cloth (Fe2O3 NRs/CC) is reported to exhibit a high NH3 yield rate of 328.17 μmol h-1 cm-2 at -0.9 V versus RHE, outperforming most of the reported Fe catalysts. An in situ growth strategy provides massive exposed active sites and a fast electron-transport channel between the carbon cloth and Fe2O3, which accelerates the charge-transport rate and facilitates the conversion of nitrate to NH3. In situ Raman spectroscopy in conjunction with attenuated total reflection Fourier transform infrared spectroscopy reveals the catalytic mechanism of nitrate to NH3. Our study provides not only an efficient catalyst for NH3 production but also useful guidelines for the pathways and mechanism of nitrate electroreduction to NH3.

Cu nanoparticles decorated juncus-derived carbon for efficient electrocatalytic nitrite-to-ammonia conversion

Electrocatalytic nitrite reduction to value-added NH₃ can simultaneously achieve sustainable ammonia production and N-contaminant removal in natural environments, which has attracted widespread attention but still lacks efficient catalysts. In this work, Cu nanoparticles decorated juncus-derived carbon can be proposed as a high-active electrocatalyst for NO₂^--to-NH₃ conversion, obtaining a high Faradaic efficiency of 93.2% and a satisfactory NH₃ yield of 523.5 μmol h^-1 mg_cat.^-1. Density functional theory calculations were applied to uncover insightful understanding of internal catalytic mechanism.

High-Efficiency Electrosynthesis of Ammonia with Selective Reduction of Nitrate in Neutral Media Enabled by Self-Supported Mn2CoO4 Nanoarray

Ambient ammonia synthesis by electroreduction of nitrate (NO3-) provides us a sustainable and environmentally friendly alternative to the traditional Haber-Bosch process. In this work, Mn2CoO4 nanoarray grown on carbon cloth (Mn2CoO4/CC) serves as a superior electrocatalyst for efficient NH3 synthesis by selective reduction of NO3-. When operated in 0.1 M PBS with 0.1 M NaNO3, Mn2CoO4/CC reaches a high Faraday efficiency of 98.6% and a large NH3 yield up to 11.19 mg/h/cm2. Moreover, it exhibits excellent electrocatalytic stability. Theory calculations show that the Mn2CoO4 surface has strong interaction with NO3-, which can effectively inhibit the occurrence of hydrogen evolution, beneficial for NO3--to-NH3 conversion.

Enhancing Electrocatalytic NO Reduction to NH3 by the CoS Nanosheet with Sulfur Vacancies

Electrochemical reduction of NO to NH₃ is of great significance for mitigating the accumulation of nitrogen oxides and producing valuable NH₃. Here, we demonstrate that the CoS nanosheet with sulfur vacancies (CoS_1-x) behaves as an efficient catalyst toward electrochemical NO-to-NH₃ conversion. In 0.2 M Na₂SO₄ electrolyte, such CoS_1-x displays a large NH₃ yield rate (44.67 μmol cm^-2 h^-1) and a high Faradaic efficiency (53.62%) at -0.4 V versus the reversible hydrogen electrode, outperforming the CoS counterpart (27.02 μmol cm^-2 h^-1; 36.68%). Moreover, the Zn-NO battery with CoS_1-x shows excellent performance with a power density of 2.06 mW cm^-2 and a large NH₃ yield rate of 1492.41 μg h^-1 mg_cat.^-1. Density functional theory was performed to obtain mechanistic insights into the NO reduction over CoS_1-x.

Nitrite reduction over Ag nanoarray electrocatalyst for ammonia synthesis

Electrochemical reduction of nitrite to ammonia can simultaneously achieve ammonia synthesis and N-contaminant removal under mild conditions, which has attracted widespread attention but still lacks efficient catalysts. In this work, Ag nanoarray using NiO nanosheets array on carbon cloth as support is reported as an efficient electrocatalyst to selectively reduce nitrite to ammonia. In 0.1 M NaOH with 0.1 M NO₂^-, such catalyst exhibits a maximum ammonia yield of 5,751 μg h^-1 cm^-2 (57,510 μg h^-1 mg_Ag^-1) and high Faradaic efficiency up to 97.7 %. Density functional theory calculations applied to uncover the catalytic mechanism of NO₂^- reduction reaction on Ag.

High-Performance Electrochemical Nitrate Reduction to Ammonia under Ambient Conditions Using a FeOOH Nanorod Catalyst

Electrocatalytic nitrate reduction is promising as an environmentally friendly process to produce high value-added ammonia with simultaneous removal of nitrate, a widespread nitrogen pollutant, for water treatment; however, efficient electrocatalysts with high selectivity are required for ammonia formation. In this work, FeOOH nanorod with intrinsic oxygen vacancy supported on carbon paper (FeOOH/CP) is proposed as a high-performance electrocatalyst for converting nitrate to ammonia at room temperature. When operated in a 0.1 M phosphate-buffered saline (PBS) solution with 0.1 M NaNO₃, FeOOH/CP is able to obtain a large NH₃ yield of 2419 μg h^-1 cm^-2 and a surprisingly high Faradic efficiency of 92% with excellent stability. Density functional theory calculation demonstrates that the potential-determining step for nitrate reduction over FeOOH (200) is *NO₂H + H⁺ + e^- → *NO + H₂O.