Durable Electrocatalytic Reduction of Nitrate to Ammonia over Defective Pseudobrookite Fe2 TiO5 Nanofibers with Abundant Oxygen Vacancies

Boosting electrochemical ammonia synthesis via dynamic nitrogen carriers coupled with electron-rich Lewis acidic sites on TiO2-x nanofiber

In light of the high energy consumption and substantial carbon emissions associated with traditional NH3 production based on the Haber-Bosch process, the aqueous electrochemical nitrogen reduction reaction (NRR) offers a clean and sustainable alternative production route. Nevertheless, activating the NN bonds at room temperature is challenging due to the high bond energy, severely hindering the development and commercialization of the electrochemical NRR. Herein, we report a synergistic strategy for achieving efficient N2 activation at ambient conditions that combines electrolyte engineering with catalytic site-modulated TiO2-x nanofiber electrocatalysts. The synthesized TiO2-x nanofiber electrocatalysts contained abundant intrinsic oxygen vacancies and were further modified with hydroxyl groups to create electron-rich Lewis acidic Ti sites. Additionally, BF3 was engineered into the electrolyte microenvironment, and it could form adducts with N2, serving as a dynamic carrier for N2 transport. The electron-rich Lewis acidic sites and the dynamic carriers exerted a 'pull-pull' effect on N2, thereby weakening the NN bonds. Through electrochemical performance evaluation, the designed electrocatalytic scheme achieved an NH3 yield of ∼57.15 μg h-1 mg-1 and a Faradaic efficiency of ∼15.14 %. We anticipate that this methodology will provide new insights into the development of electrochemical ammonia synthesis, particularly in relation to multifaceted design.

Enhancing Photoelectrochemical Water Oxidation Using Ferromagnetic Materials and Magnetic Fields

Photoelectrochemical (PEC) water splitting provides a promising strategy for H2 production. However, its performance is limited by severe carrier recombination and sluggish water oxidation kinetics. While numerous strategies, namely, elemental doping, morphology engineering, heterojunction formation, and catalyst modification, have been extensively explored to enhance the PEC performance, the application of external magnetic fields (MFs) to affect the catalysis or charge carrier dynamics remains yet to be exploited. Herein, BiVO4 is first selected as a representative photoanode, demonstrating that an ultrathin ferromagnetic coating based on Fe2TiO5, when combined with an external MF, boosts its solar water oxidation performance. The combined analyses of the charge transfer and separation efficiency together with ultraviolet photoelectron spectroscopy and transient absorption spectroscopy data revealed that the MF positively affects the band alignment across the BiVO4/Fe2TiO5 interface, improving the charge separation, while the oxygen evolution at the Fe2TiO5/electrolyte interface was promoted. Finally, we expand this concept to other metal oxide photoanodes, such as TiO2, WO3, and Fe2O3, demonstrating the universality of such an approach. Overall, this work pioneers a novel route to harvest external MFs and improve the PEC response of common nonmagnetic semiconductor photoelectrodes in photoelectrocatalytic conversion.

Nanoporous copper titanium tin (np-Cu2TiSn) Heusler alloy prepared by dealloying-induced phase transformation for electrocatalytic nitrate reduction to ammonia

Heusler alloys are a series of well-established intermetallic compounds with abundant structure and elemental substitutions, which are considered as potentially valuable catalysts for integrating multiple reactions owing to the features of ordered atomic arrangement and optimized electronic structure. Herein, a nanoporous copper titanium tin (np-Cu2TiSn) Heusler alloy is successfully prepared by the (electro)chemical dealloying transformation method, which exhibits high nitrate (NO3-) reduction performance with an NH3 Faradaic efficiency of 77.14 %, an NH3 yield rate of 11.90 mg h-1 mg-1cat, and a stability for 100 h under neutral condition. Significantly, we also convert NO3- to high-purity ammonium phosphomolybdate with NH4+ collection efficiency of 83.8 %, which suggests a practical approach to convert wastewater nitrate into value-added ammonia products. Experiments and theoretical calculations reveal that the electronic structure of Cu sites is modulated by the ligand effect of surrounding Ti and Sn atoms, which can simultaneously enhance the activation of NO3-, facilitate the desorption of NH3, and reduce the energy barriers, thereby boosting the electrochemical nitrate reduction reaction.

Interface engineering enhances Lewis acidity and activates inert sites to jointly promote nitrate reduction to ammonia

Electrocatalytic nitrate reduction to ammonia (NRA) has been considered a highly promising method for "waste to treasure". Herein, a heterogeneous catalyst FeP/Cu3P/CF enriched with Lewis acid sites was designed for efficient NRA. The faradaic efficiency and NH3 yield are up to 95.61 % and 0.2573 mmol h-1 cm-2, the NH3-N selectivity is 95.11 %, and the NO3--N conversion is close to 100 %. Experimental and theoretical studies verify that the formation of the interface activates the originally inert Fe site and makes it become the second active center in addition to Cu. The charge transfer greatly raises the positive charge density of Feδ+ and Cuδ+ sites, leading to a significant increase in their Lewis acidity, which enables them to interact strongly with the Lewis base NO3- and improves the NRA performance; meanwhile, the ability of P site with increased negative charge density to capture H enhances, which is beneficial for the subsequent hydrogenation of nitrate reduction. This work provides an approach for designing efficient NRA catalysts through interface engineering strategy.

Transition Metal-Gallium Intermetallic Compounds with Tailored Active Site Configurations for Electrochemical Ammonia Synthesis

Gallium (Ga) with a low melting point can serve as a unique metallic solvent in the synthesis of intermetallic compounds (IMCs). The negative formation enthalpy of transition metal-Ga IMCs endows them with high catalytic stability. Meanwhile, their tunable crystal structures offer the possibility to tailor the configurations of active sites to meet the requirements for specific catalytic applications. Herein, we present a general method for preparing a range of transition metal-Ga IMCs, including Co-Ga, Ni-Ga, Pt-Ga, Pd-Ga, and Rh-Ga IMCs. The structurally ordered CoGa IMCs with body-centered cubic (bcc) structure are uniformly dispersed on the nitrogen-doped reduced graphene oxide substrate (O-CoGa/NG) and deliver outstanding nitrate reduction reaction (NO3RR) performance, making them excellent catalysts to construct highly efficient rechargeable Zn-NO3 - battery. Operando studies and theoretical simulations demonstrate that the electron-rich environments around the Co atoms enhance the adsorption strength of *NO3 intermediate and simultaneously suppress the formation of hydrogen, thus improving the NO3RR activity and selectivity.

Self-Reconstruction Induced Electronic Metal-Support Interaction for Modulated Cu+ Sites on TiO2 Nanofibers in Electrocatalytic Nitrate Conversion

The Cu+ active sites have gained great attention in electrochemical nitrate reduction, offering a highly promising method for nitrate removal from water bodies. However, challenges arise from the instability of the Cu+ state and microscopic structure over prolonged operation, limiting the selectivity and durability of Cu+-based electrodes. Herein, a self-reconstructed Cu2O/TiO2 nanofibers (Cu2O/TiO2 NFs) catalyst, demonstrating exceptional stability over 50 cycles (12 h per cycle), a high NO3 --N removal rate of 90.2%, and N2 selectivity of 98.7% is reported. The in situ electrochemical reduction contributes to the self-reconstruction of Cu2O/TiO2 nanofibers with stabilized Cu+ sites via the electronic metal-support interaction between TiO2 substrates, as evidenced by in situ characterizations and theoretical simulations. Additionally, density functional theory (DFT) calculations also indicate that the well-retained Cu+ sites enhance catalytic capability by inhibiting the hydrogen evolution reaction and optimizing the binding energy of *NO on the Cu2O/TiO2 NFs heterostructure surface. This work proposes an effective strategy for preserving low-valence-state Cu-based catalysts with high intrinsic activity for nitrate reduction reaction (NO3RR), thereby advancing the prospects for sustainable nitrate remediation technologies.

Amorphous Ni3B Promotes Electroreduction of Nitrate to Ammonia

The electrocatalytic nitrate reduction to ammonia (NRA) can address nitrogen cycle imbalance and high carbon emissions; however, the intense competition of hydrogen evolution reaction (HER) restricts the rate of NH3 production. Herein, amorphous Ni3B (a-Ni3B) is designed to balance the NRA and HER. The NH3 yield of a-Ni3B surpasses those of pure Ni and NiO, which is attributed to the preferential adsorption of NO3- on the B and Ni sites of a-Ni3B for the NRA reaction, greatly inhibiting the HER. Furthermore, the a-Ni3B possesses advantages in NRA performance compared to crystalline Ni3B (c-Ni3B) due to more active hydrogen (*H) generated during the catalytic process. The *H in the NRA process on a-Ni3B is verified by the electron spin resonance technique. The NRA mechanism is comprehensively discussed based on the results of in situ characterization and density functional theory calculations. The a-Ni3B can enhance NH3 production by inhibiting HER, which provides ideas for sustainable NH3 synthesis.

Oriented Crystal Growth of Li0.33La0.557TiO3 Nanowire Induced by One-Dimensional Polymer Sheath toward Rapid Lithium-Ion Transfer

Superionic conductor-based solid-state electrolytes with preferred crystal structures hold great promise for realizing ultrafast lithium-ion (Li+) transfer, which is urgently desired for all-solid-state lithium batteries. However, the precise control of crystal growth of superionic conductors is still challenging since the crystals always spontaneously grow to disordered structures with the lowest internal energy to ensure thermodynamic stability. Herein, a coaxial nanowire with a polyvinylpyrrolidone (PVP) sheath and a Li0.33La0.557TiO3 (LLTO) precursor core (PVP/LLTO-caNW) is prepared through coaxial electrospinning, followed by sintering into LLTO nanowire with an oriented crystal structure (LLTO-caNW). We demonstrate that the one-dimensional PVP sheath as a sacrificial layer generates uniform and the strongest adsorption ability on the (110) phase among different LLTO crystal planes, which induces the crystal to preferentially grow along the c-axis (the fastest Li+ transfer direction) during the nucleation and growth processes. As a result, the prepared LLTO-caNW displays an ultrahigh bulk ionic conductivity of 3.13 × 10-3 S cm-1, exceeding most LLTO crystals and approaching the theoretical conductivity. Meanwhile, the oriented crystal growth imparts to LLTO-caNW significantly reduced grain boundary resistance, and the grain-boundary conductivity reaches up to 1.09 × 10-3 S cm-1. This endows the composite solid electrolyte with high ionic conduction performance and superior cycle stability in the assembled all-solid-state lithium battery.

MOF-on-MOF Heterostructured Electrocatalysts for Efficient Nitrate Reduction to Ammonia

Electrocatalytic nitrate reduction reaction (NO3 -RR) is an important route for sustainable NH3 synthesis and environmental remediation. Metal-organic frameworks (MOFs) are one family of promising NO3 -RR electrocatalysts, however, there is plenty of room to improve in their performance, calling for new design principles. Herein, a MOF-on-MOF heterostructured electrocatalyst with interfacial dual active sites and build-in electric field is fabricated for efficient NO3 -RR to NH3 production. By growing Co-HHTP (HHTP=2,3,6,7,10,11-hexahydroxytriphenylene) nanorods on Ni-BDC (BDC=1,4-benzenedicarboxylate) nanosheets, experimental and theoretical investigations demonstrate the formation of Ni-O-Co bonds at the interface of MOF-on-MOF heterostructure, leading to dual active sites tailed for NO3 -RR. The Ni sites facilitate the adsorption and activation of NO3 -, while the Co sites boost the H2O decomposition to supply active hydrogen (Hads) for N-containing intermediates hydrogenation on adjacent Ni sites, cooperatively reducing the energy barriers of NO3 -RR process. Together with the accelerated electron transfer enabled by built-in electric field, remarkable NO3 -RR performance is achieved with an NH3 yield rate of 11.46 mg h-1 cm-2 and a Faradaic efficiency of 98.4 %, outperforming most reported MOF-based electrocatalysts. This work provides new insights into the design of high-performance NO3 -RR electrocatalysts.

Ruthenium Anchored Laser-Induced Graphene as Binder-Free and Free-Standing Electrode for Selective Electrosynthesis of Ammonia from Nitrate

Developing effective electrocatalysts for the nitrate reduction reaction (NO3RR) is a promising alternative to conventional industrial ammonia (NH3) synthesis. Herein, starting from a flexible laser-induced graphene (LIG) film with hierarchical and interconnected macroporous architecture, a binder-free and free-standing Ru-modified LIG electrode (Ru-LIG) is fabricated for electrocatalytic NO3RR via a facile electrodeposition method. The relationship between the laser-scribing parameters and the NO3RR performance of Ru-LIG electrodes is studied in-depth. At -0.59 VRHE, the Ru-LIG electrode exhibited the optimal and stable NO3RR performance (NH3 yield rate of 655.9 µg cm-2 h-1 with NH3 Faradaic efficiency of up to 93.7%) under a laser defocus setting of +2 mm and an applied laser power of 4.8 W, outperforming most of the reported NO3RR electrodes operated under similar conditions. The optimized laser-scribing parameters promoted the surface properties of LIG with increased graphitization degree and decreased charge-transfer resistance, leading to synergistically improved Ru electrodeposition with more exposed NO3RR active sites. This work not only provides a new insight to enhance the electrocatalytic NO3RR performance of LIG-based electrodes via the coordination with metal electrocatalysts as well as identification of the critical laser-scribing parameters but also will inspire the rational design of future advanced laser-induced electrocatalysts for NO3RR.

Sulfur filling activates vacancy-induced C-C bond cleavage in polyol electrooxidation

Using the electrochemical polyol oxidation reaction (POR) to produce formic acid over nickel-based oxides/hydroxides (NiO x H y ) is an attractive strategy for the electrochemical upgrading of biomass-derived polyols. The key step in the POR, i.e. the cleavage of the C-C bond, depends on an oxygen-vacancy-induced mechanism. However, a high-energy oxygen vacancy is usually ineffective for Schottky-type oxygen-vacancy-rich β-Ni(OH)2 (VSO-β-Ni(OH)2). As a result, both β-Ni(OH)2 and VSO-β-Ni(OH)2 cannot continuously catalyze oxygen-vacancy-induced C-C bond cleavage during PORs. Here, we report a strategy of oxygen-vacancy-filling with sulfur to synthesize a β-Ni(OH)2 (S-VO-β-Ni(OH)2) catalyst, whose oxygen vacancies are protected by filling with sulfur atoms. During PORs over S-VO-β-Ni(OH)2, the pre-electrooxidation-induced loss of sulfur and structural self-reconstruction cause the in-situ generation of stable Frenkel-type oxygen vacancies for activating vacancy-induced C-C bond cleavage, thus leading to excellent POR performances. This work provides an intelligent approach for guaranteeing the sustaining action of the oxygen-vacancy-induced catalytic mechanism in electrooxidation reactions.

Recent progress on Ti-based catalysts in the electrochemical synthesis of ammonia

Electrochemical ammonia synthesis presents a sustainable alternative, offering the potential for enhanced energy efficiency and environmental benefits compared to the conventional Haber-Bosch process. In recent years, the electrocatalytic reduction of nitrate to ammonia (NO3-RR) has emerged as a crucial approach for achieving sustainable NH3 production. To enhance energy efficiency and successfully convert NO3- to NH3, it is essential to investigate cost-effective electrocatalysts that provide high Faraday efficiency and demonstrate adequate stability. Ti-based materials are considered ideal candidates as catalysts due to their environmental friendliness and robust stability. This review initially summarizes the nitrate reduction reaction pathway and concisely discusses the impact of the potential intermediates and reaction steps on the overall reaction efficiency and product selectivity. Subsequently, an overview of the fundamental characteristics of Ti and TiO2 is presented. Additionally, the research process on Ti-based electrocatalysts in the electrochemical reduction of nitrate for ammonia synthesis is summarized. Finally, the design strategies, such as heteroatom doping and the introduction of oxygen vacancies, to enhance catalytic efficiency and selectivity are presented. Through this comprehensive review, we endeavor to furnish researchers with the most recent insights into the application of titanium-based electrocatalysts in nitrate reduction reactions and to stimulate innovative thought processes on the electrocatalytic synthesis of ammonia.

Efficient Tandem Electrocatalytic Nitrate Reduction to Ammonia on Bimodal Nanoporous Ag/Ag-Co across Broad Nitrate Concentrations

Electrocatalytic nitrate (NO3-) reduction reaction (NO3-RR) represents a promising strategy for both wastewater treatment and ammonia (NH3) synthesis. However, it is difficult to achieve efficient NO3-RR on a single-component catalyst due to NO3-RR involving multiple reaction steps that rely on distinct catalyst properties. Here we report a facile alloying/dealloying-driven phase-separation strategy to construct a bimodal nanoporous Ag/Ag-Co tandem catalyst that exhibits a remarkable NO3-RR performance in a broad NO3- concentration range from 5 to 500 mM. In 10 and 50 mM NO3- electrolytes, the NH3 yield rates reach 3.4 and 25.1 mg h-1 mgcat.-1 with corresponding NH3 Faradaic efficiencies of 94.0% and 97.1%, respectively, outperforming most of the reported catalysts under the same NO3- concentration. The experimental results and density functional theory calculations demonstrate that Ag ligaments preferentially reduce NO3- to NO2-, while bimetallic Ag-Co ligaments catalyze the reduction of NO2- to NH3.

Metal-Organic Frameworks Derived Carbon-Supported Metal Electrocatalysts for Energy-Related Reduction Reactions

Electrochemical reduction reactions, as cathodic processes in many energy-related devices, significantly impact the overall efficiency determined mainly by the performance of electrocatalysts. Metal-organic frameworks (MOFs) derived carbon-supported metal materials have become one of star electrocatalysts due to their tunable structure and composition through ligand design and metal screening. However, for different electroreduction reactions, the required active metal species vary in phase component, electronic state, and catalytic center configuration, hence requiring effective customization. From this perspective, this review comprehensively analyzes the structural design principles, metal loading strategies, practical electroreduction performance, and complex catalytic mechanisms, thereby providing insights and guidance for the future rational design of such electroreduction catalysts.

Facet-Dependent Evolution of Active Components on Spinel Co3O4 for Electrochemical Ammonia Synthesis

Spinel cobalt oxides (Co3O4) have emerged as a promising class of catalysts for the electrochemical nitrate reduction reaction (eNO3RR) to ammonia, offering advantages such as low cost, high activity, and selectivity. However, the specific role of crystallographic facets in determining the catalysts' performance remains elusive, impeding the development of efficient catalysts. In this study, we have synthesized various Co3O4 nanostructures with exposed facets of {100}, {111}, {110}, and {112}, aiming to investigate the dependence of the eNO3RR activity on the crystallographic facets. Among the catalysts tested, Co3O4 {111} shows the best performance, achieving an ammonia Faradaic efficiency of 99.1 ± 1.8% with a yield rate of 35.2 ± 0.6 mg h-1 cm-2 at -0.6 V vs RHE. Experimental and theoretical results reveal a transformation process in which the active phases evolve from Co3O4 to Co3O4-x with oxygen vacancy (Ov), followed by a Co3O4-x-Ov/Co(OH)2 hybrid, and finally Co(OH)2. This process is observed for all facets, but the formation of Ov and Co(OH)2 is the most rapid on the (111) surface. The presence of Ov significantly reduces the free energy of the *NH2 intermediate formation from 1.81 to -0.53 eV, and plentiful active sites on the densely reconstructed Co(OH)2 make Co3O4 {111} an ideal catalyst for ammonia synthesis via eNO3RR. This work provides insights into the understanding of the realistic active components, offers a strategy for developing highly efficient Co-based spinel catalysts for ammonia synthesis through tuning the exposed facets, and helps further advance the design and optimization of catalysts in the field of eNO3RR.

Enhancing Nitrate Reduction to Ammonia Through Crystal Phase Engineering: Unveiling the Hydrogen Bonding Effect in δ-FeOOH Electrocatalysis

Crystal phase engineering has emerged as a powerful tool for tailoring the electrocatalytic performance, yet its impact on nitrate reduction to ammonia (NRA) remains largely uncharted territory. Herein, density functional theory (DFT) calculations are performed to unravel the influence of the crystal phase of FeOOH on the adsorption behavior of *NO3. Inspiringly, FeOOH samples with four distinct crystal phases (δ, γ, α, and β) are successfully synthesized and deployed as electrocatalysts for NRA. Remarkably, among all FeOOH samples, δ-FeOOH demonstrates the superior NRA performance, achieving a NH3 Faradic efficiency (FE NH 3 $\rm{FE} _ {\rm{NH_3}}$ ) of 90.2% at -1.0 V versus reversible hydrogen electrode (RHE) and a NH3 yield rate (Yield NH 3 $\rm{Yield} _ {\rm{NH_3}}$ ) of 5.73 mg h-1 cm-2 at -1.2 V. In-depth experiments and theoretical calculations unveil the existence of hydrogen bonding interaction between δ-FeOOH and *NOx, which not only enhances the adsorption of *NOx but also disrupts the linear relationships between the free energy of *NO3 adsorption and various parameters, including limiting potential, d-band center (εd) and transferred charge from FeOOH to *NO3, ultimately contributing to the exceptional NRA performance.

Direct Eight-Electron N2O Electroreduction to NH3 Enabled by an Fe Double-Atom Catalyst

N2O is a dominant atmosphere pollutant, causing ozone depletion and global warming. Currently, electrochemical reduction of N2O has gained increasing attention to remove N2O, but its product is worthless N2. Here, we propose a direct eight-electron (8e) pathway to electrochemically convert N2O into NH3. As a proof of concept, using density functional theory calculation, an Fe2 double-atom catalyst (DAC) anchored by N-doped porous graphene (Fe2@NG) was screened out to be the most active and selective catalyst for N2O electroreduction toward NH3 via the novel 8e pathway, which benefits from the unique bent N2O adsorption configuration. Guided by theoretical prediction, Fe2@NG DAC was fabricated experimentally, and it can achieve a high N2O-to-NH3 Faradaic efficiency of 77.8% with a large NH3 yield rate of 2.9 mg h-1 cm-2 at -0.6 V vs RHE in a neutral electrolyte. Our study offers a feasible strategy to synthesize NH3 from pollutant N2O with simultaneous N2O removal.

Three-Dimensional Porous Cu/Cu2+1O Nanosheet Arrays Promote Electrochemical Nitrate-to-Ammonia Conversion

The efficiency of electrochemical nitrate (NO3-) reduction to ammonia (NH3) still remains a challenge due to the sluggish kinetics of the complex eight-electron reduction process and competitive hydrogen evolution reaction (HER). Herein, we designed new three-dimensional (3D) porous Cu/Cu2+1O nanosheet arrays (Cu/Cu2+1O NSA) by coupling a template-directed method with in situ electroreduction. Thanks to the 3D porous structure and in-plane heterojunctions, Cu/Cu2+1O NSA can provide abundant active sites and a good interfacial effect, obtaining the maximum Faradaic efficiency (FE) of ammonia (88.09%) and high yield rate of 0.2634 mmol h-1 cm-2, which is higher than that of CuO nanosheets (77.81% and 0.2188 mmol h-1 cm-2) and CuO nanoparticles (34.60% and 0.0692 mmol h-1 cm-2). Experimental results and DFT simulations show that the interface effect of Cu/Cu2+1O can decrease the reaction energy barrier of the key step (*NO to *NOH) and can greatly inhibit the competitive hydrogen evolution reaction, thereby achieving excellent electrocatalytic performance for nitrate-to-ammonia conversion.

Metal Doped Unconventional Phase IrNi Nanobranches: Tunable Electrochemical Nitrate Reduction Performance and Pollutants Upcycling

Electrochemical nitrate reduction (NO3RR) provides a new option to abate nitrate contamination with a low carbon footprint. Restricted by competitive hydrogen evolution, achieving satisfied nitrate reduction performance in neutral media is still a challenge, especially for the regulation of this multielectron multiproton reaction. Herein, facile element doping is adopted to tune the catalytic behavior of IrNi alloy nanobranches with an unconventional hexagonal close-packed (hcp) phase toward NO3RR. In particular, the obtained hcp IrNiCu nanobranches favor the ammonia production and suppress byproduct formation in a neutral electrolyte indicated by in situ differential electrochemical mass spectrometry, with a high Faradaic efficiency (FE) of 85.6% and a large yield rate of 1253 μg cm-2 h-1 at -0.4 and -0.6 V (vs reversible hydrogen electrode (RHE)), respectively. In contrast, the resultant hcp IrNiCo nanobranches promote the formation of nitrite, with a peak FE of 33.1% at -0.1 V (vs RHE). Furthermore, a hybrid electrolysis cell consisting of NO3RR and formaldehyde oxidation is constructed, which are both catalyzed by hcp IrNiCu nanobranches. This electrolyzer exhibits lower overpotential and holds the potential to treat polluted air and wastewater simultaneously, shedding light on green chemical production based on contaminate degradation.

Overcoming Electrostatic Interaction via Pulsed Electroreduction for Boosting the Electrocatalytic Urea Synthesis

Electrocatalytic urea synthesis under ambient conditions offers a promising alternative strategy to the traditional energy-intensive urea industry protocol. Limited by the electrostatic interaction, the reduction reaction of anions at the cathode in the electrocatalytic system is not easily achievable. Here, we propose a novel strategy to overcome electrostatic interaction via pulsed electroreduction. We found that the reconstruction-resistant CuSiOx nanotube, with abundant atomic Cu-O-Si interfacial sites, exhibits ultrastability in the electrosynthesis of urea from nitrate and CO2. Under a pulsed potential approach with optimal operating conditions, the Cu-O-Si interfaces achieve a superior urea production rate (1606.1 μg h-1 mgcat. -1) with high selectivity (79.01 %) and stability (the Faradaic efficiency is retained at 80 % even after 80 h of testing), outperforming most reported electrocatalytic synthesis urea catalysts. We believe our strategy will incite further investigation into pulsed electroreduction increasing substrate transport, which may guide the design of ambient urea electrosynthesis and other energy conversion systems.

Enabling Logistics Automation in Nanofactory: Cobalt Phosphide Embedded Metal-Organic Frameworks for Efficient Electrocatalytic Nitrate Reduction to Ammonia

Electrocatalytic nitrate reduction reaction (NitRR) in neutral condition offers a promising strategy for green ammonia synthesis and wastewater treatment, the rational design of electrocatalysts is the cornerstone. Inspired by modern factory design where both machines and logistics matter for manufacturing, it is reported that cobalt phosphide (CoP) nanoparticles embedded in zinc-based zeolite imidazole frameworks (Zn-ZIF) function as a nanofactory with high performance. By selective phosphorization of ZnCo bimetallic zeolite imidazole framework (ZnCo-ZIF), the generated CoP nanoparticles act as "machines" (active sites) for molecular manufacturing (NO3 - to NH4 + conversion). The purposely retained framework (Zn-ZIFs) with positive charge promotes logistics automation, i.e., the automatic delivery of NO3 - reactants and timely discharge of NH4 + products in-and-out the nanofactory due to electrostatic interaction. Moreover, the interaction between Zn-ZIF and CoP modulates the Co sites into electron insufficient state with upshifted d-band center, facilitating the reduction/hydrogenation of NO3 - to ammonia and restricting the competitive hydrogen evolution. Consequently, the assembled CoP/Zn-ZIF nanofactory exhibits superior NitRR performances with a high Faraday efficiency of ≈97% and a high ammonia yield of 0.89 mmol cm-1 h-1 in neutral condition, among the best of reported electrocatalysts. The work provides new insights into the design principles of efficient NitRR electrocatalysts.

Crystalline modulation of zirconia for efficient nitrate reduction to ammonia under ambient conditions

Zirconia as a polycrystalline catalyst can be effectively tuned by doping low-valence elements and meanwhile form abundant oxygen vacancies. Herein, the crystalline structures of zirconia are modulated by scandium doping and proposed as a robust catalyst for nitrate reduction to ammonia. The tetragonal zirconia achieves a maximum ammonia yield of 16.03 mg h-1 mgcat.-1, superior to the other crystal forms. DEMS tests unveil the reaction pathway and theoretical calculations reveal the low free energy of -0.22 eV for nitrate adsorption at the tetragonal zirconia.

Highly efficient electrochemical ammonia synthesis via nitrate reduction over metallic Cu phase coupling sulfion oxidation

Electrochemical nitrate reduction reaction (NO3RR) is a promising technology for ammonia production and denitrification of wastewater. Its application is seriously restricted by the development of the highly active and selective electrocatalyst and a rational electrolysis system. Here, we constructed an efficient electrochemical ammonia production process via nitrate reduction on the metallic Cu electrocatalyst when coupled with anodic sulfion oxidation reaction (SOR). The synthesized Cu catalyst delivers an excellent NH3 Faradaic efficiency of 96.0 % and a NH3 yield of 0.391 mmol h-1 cm-2 at -0.2 V vs. reversible hydrogen electrode, which mainly stem from the more favorable conversion of NO2 - to NH3 on Cu0. Importantly, the well-designed electrolysis system with cathodic NO3RR and anodic SOR achieves a dramatically reduced cell voltage of 0.8 V at 50 mA cm-2 in comparison with the one with anodic oxygen evolution reaction (OER) of 1.9 V. This work presents an effective strategy for the energy-saving ammonia production via constructing effective nitrate reduction catalyst and replacing the OER with SOR while removing the pollutants including nitrate and sulfion.

Electrochemical Nitrate Reduction: Ammonia Synthesis and the Beyond

Natural nitrogen cycle has been severely disrupted by anthropogenic activities. The overuse of N-containing fertilizers induces the increase of nitrate level in surface and ground waters, and substantial emission of nitrogen oxides causes heavy air pollution. Nitrogen gas, as the main component of air, has been used for mass ammonia production for over a century, providing enough nutrition for agriculture to support world population increase. In the last decade, researchers have made great efforts to develop ammonia processes under ambient conditions to combat the intensive energy consumption and high carbon emission associated with the Haber-Bosch process. Among different techniques, electrochemical nitrate reduction reaction (NO3RR) can achieve nitrate removal and ammonia generation simultaneously using renewable electricity as the power, and there is an exponential growth of studies in this research direction. Here, a timely and comprehensive review on the important progresses of electrochemical NO3RR, covering the rational design of electrocatalysts, emerging CN coupling reactions, and advanced energy conversion and storage systems is provided. Moreover, future perspectives are proposed to accelerate the industrialized NH3 production and green synthesis of chemicals, leading to a sustainable nitrogen cycle via prosperous N-based electrochemistry.

Unveiling Cutting-Edge Developments in Electrocatalytic Nitrate-to-Ammonia Conversion

The excessive enrichment of nitrate in the environment can be converted into ammonia (NH3) through electrochemical processes, offering significant implications for modern agriculture and the potential to reduce the burden of the Haber-Bosch (HB) process while achieving environmentally friendly NH3 production. Emerging research on electrocatalytic nitrate reduction (eNitRR) to NH3 has gained considerable momentum in recent years for efficient NH3 synthesis. However, existing reviews on nitrate reduction have primarily focused on limited aspects, often lacking a comprehensive summary of catalysts, reaction systems, reaction mechanisms, and detection methods employed in nitrate reduction. This review aims to provide a timely and comprehensive analysis of the eNitRR field by integrating existing research progress and identifying current challenges. This review offers a comprehensive overview of the research progress achieved using various materials in electrochemical nitrate reduction, elucidates the underlying theoretical mechanism behind eNitRR, and discusses effective strategies based on numerous case studies to enhance the electrochemical reduction from NO3 - to NH3. Finally, this review discusses challenges and development prospects in the eNitRR field with an aim to guide design and development of large-scale sustainable nitrate reduction electrocatalysts.

Sustainable conversion of alkaline nitrate to ammonia at activities greater than 2 A cm-2

Nitrate (NO3‒) pollution poses significant threats to water quality and global nitrogen cycles. Alkaline electrocatalytic NO3‒ reduction reaction (NO3RR) emerges as an attractive route for enabling NO3‒ removal and sustainable ammonia (NH3) synthesis. However, it suffers from insufficient proton (H+) supply in high pH conditions, restricting NO3‒-to-NH3 activity. Herein, we propose a halogen-mediated H+ feeding strategy to enhance the alkaline NO3RR performance. Our platform achieves near-100% NH3 Faradaic efficiency (pH = 14) with a current density of 2 A cm-2 and enables an over 99% NO3--to-NH3 conversion efficiency. We also convert NO3‒ to high-purity NH4Cl with near-unity efficiency, suggesting a practical approach to valorizing pollutants into valuable ammonia products. Theoretical simulations and in situ experiments reveal that Cl-coordination endows a shifted d-band center of Pd atoms to construct local H+-abundant environments, through arousing dangling O-H water dissociation and fast *H desorption, for *NO intermediate hydrogenation and finally effective NO3‒-to-NH3 conversion.

Hollow mesoporous carbon supported Co-modified Cu/Cu2O electrocatalyst for nitrate reduction reaction

The electroreduction of nitrate (NO3-) pollutants to ammonia (NH3) provides a sustainable approach for both wastewater treatment and NH3 synthesis. However, electroreduction of nitrate requires multi-step electron and proton transfer, resulting in a sluggish reaction rate. Herein, we synthesized a Co-modified Cu/Cu2O catalyst supported on hollow mesoporous carbon substrates (Co/Cu/Cu2O-MesoC) by a one-step microwave-assisted reduction method. At -0.25 V vs. reversible hydrogen electrode (RHE), Co/Cu/Cu2O-MesoC shows a Faradaic efficiency (FE) of 100 ± 1% in 0.1 M NO3-. Notably, the maximum NH3 yield rate (YieldNH3) reaches 6.416 ± 0.78 mmol mgcat-1h-1 at -0.45 V vs. RHE, which is much better than most of the previous reports. Electrochemical evaluation and in-situ Fourier transform infrared (FTIR) spectroscopy reveal that the addition of Co could promote water electrolysis, and the generated H* is involved in the following hydrogenation of intermediates, ultimately leading to faster kinetics and energetics during electrocatalytic conversion of NO3- to NH3. This synergetic electrocatalysis strategy opens a new avenue for the development of high-activity, selectivity, and stability catalysts.

Constructing molecule-metal relay catalysis over heterophase metallene for high-performance rechargeable zinc-nitrate/ethanol batteries

Zinc-nitrate batteries can integrate energy supply, ammonia electrosynthesis, and sewage disposal into one electrochemical device. However, current zinc-nitrate batteries still severely suffer from the limited energy density and poor rechargeability. Here, we report the synthesis of tetraphenylporphyrin (tpp)-modified heterophase (amorphous/crystalline) rhodium-copper alloy metallenes (RhCu M-tpp). Using RhCu M-tpp as a bifunctional catalyst for nitrate reduction reaction (NO3RR) and ethanol oxidation reaction in neutral solution, a highly rechargeable and low-overpotential zinc-nitrate/ethanol battery is successfully constructed, which exhibits outstanding energy density of 117364.6 Wh kg-1cat, superior rate capability, excellent cycling stability of ~400 cycles, and potential ammonium acetate production. Ex/in situ experimental studies and theoretical calculations reveal that there is a molecule-metal relay catalysis in NO3RR over RhCu M-tpp that significantly facilitates the ammonia selectivity and reaction kinetics via a low energy barrier pathway. This work provides an effective design strategy of multifunctional metal-based catalysts toward the high-performance zinc-based hybrid energy systems.

Unconventional Synthesis of Hierarchically Twinned Copper as Efficient Electrocatalyst for Nitrate-Ammonia Conversion

Twin boundary (TB) engineering provides exciting opportunities to tune the performance levels of metal-based electrocatalysts. However, the controllable construction of TB greatly relies on surfactants, blocking active sites, and electron transfer by surfactants. Here, a surfactant-free and facile strategy is proposed for synthesizing copper (Cu) nanocatalysts with dense hierarchical TB networks (HTBs) by the rapid thermal reductions in metastable CuO nanosheets in H2 . As revealed by in situ transmission electron microscopy, the formation of HTBs is associated with the fragmentation of nanosheets in different directions to generate abundant crystal nuclei and subsequently unconventional crystal growth through the collision and coalescence of nuclei. Impressively, the HTBs endow Cu with excellent electrocatalytic performance for direct nitrate-ammonia conversion, superior to that of Cu with a single-oriented TB and without TB. It is discovered that the HTBs induce the formation of compressive strains, thereby creating a synergistic effect of TBs and strains to efficiently tune the binding energies of Cu with nitrogen intermediates (i.e., NO2 *) and thus promote the tandem reaction process of NO3 - -to-NO2 - and subsequent NO2 - -to-NH3 electrocatalysis. This work demonstrates the crucial role of HTBs for boosting electrocatalysis via the synergistic effect of TBs and strains.

Insight into the Change in Local pH near the Electrode Surface Using Phosphate Species as the Probe

The difference between solution pH and local pH near an electrode surface greatly determines the electrocatalytic performance. However, there is still a lack of a facile and universal method for the local pH detection of various electrode reactions, leaving the origin of local pH changes unclear. Herein, by using phosphate species in phosphate buffer solution (PBS) as the pH probe, we demonstrate a universal local pH detection strategy through in situ Raman spectroscopy for various electrode reactions. Oxygen evolution is chosen as the example to detect the potential-dependent local pH change. Then the strategy extends to nitrate reduction, nitrobenzene reduction, and benzylamine oxidation. By comparing the local pH changes in different reactions, we reveal that the local pH change is strongly dependent on the reaction current, the ability of the system to replenish the local H+/OH-, and the number of H+/OH- per electron transfer of the electrode reaction.

Balanced NOx- and Proton Adsorption for Efficient Electrocatalytic NOx- to NH3 Conversion

Electrocatalytic nitrate (NO3-)/nitrite (NO2-) reduction reaction (eNOx-RR) to ammonia under ambient conditions presents a green and promising alternative to the Haber-Bosch process. Practically available NOx- sources, such as wastewater or plasma-enabled nitrogen oxidation reaction (p-NOR), typically have low NOx- concentrations. Hence, electrocatalyst engineering is important for practical eNOx-RR to obtain both high NH3 Faradaic efficiency (FE) and high yield rate. Herein, we designed balanced NOx- and proton adsorption by properly introducing Cu sites into the Fe/Fe2O3 electrocatalyst. During the eNOx-RR process, the H adsorption is balanced, and the good NOx- affinity is maintained. As a consequence, the designed Cu-Fe/Fe2O3 catalyst exhibits promising performance, with an average NH3 FE of ∼98% and an average NH3 yield rate of 15.66 mg h-1 cm-2 under the low NO3- concentration (32.3 mM) of typical industrial wastewater at an applied potential of -0.6 V versus reversible hydrogen electrode (RHE). With low-power direct current p-NOR generated NOx- (23.5 mM) in KOH electrolyte, the Cu-Fe/Fe2O3 catalyst achieves an FE of ∼99% and a yield rate of 15.1 mg h-1 cm-2 for NH3 production at -0.5 V (vs RHE). The performance achieved in this study exceeds industrialization targets for NH3 production by exploiting two available low-concentration NOx- sources.

Generating high-valent iron-oxo ≡FeIV=O complexes by calcium sulfite activation in neutral microenvironments for enhanced degradation of CIP

Although alkaline sulfite activation of ferrate (Fe(VI)) has advantages of fast response and high activity for degradation of organic contaminants, the specific production pathways of active species and the pH conditions still hinder its widespread application. Based on this, our study constructed a novel advanced oxidation process of calcium sulfite (CaSO3) could activated Fe(VI) continuously by Ca2+ buffering and investigated the mechanism under different pH values and CaSO3 dosages with ciprofloxacin as a target organic pollutant. The results showed that Ca2+ stabilized the process at a neutral/weakly alkaline microenvironment of pH 7-8, which could alleviate the hydrolysis of ≡FeIV=O by protons and iron hydroxyl groups. Besides, the removal of pollutants occurred efficiently when sulfate (SO32-) was excessive and had a 3:1 ratio of SO32- to Fe(VI), achieving more than 99% removal of electron-rich phenolic organic pollutants within 2 min. By adding different radical scavengers and combining electrochemical analysis methods and electron paramagnetic resonance spectroscopy techniques to revealed that the main active species in Fe(VI)/CaSO3 process were ≡FeIV=O/≡FeV=O. Furthermore, the reactivity of various sulfate species (such as SO32-, SO3•-, SO4•-, SO5•-) with Fe(VI) was calculated using density functional theory (DFT), and it was found that Fe(VI)-SO32- reaction has a much lower energy barrier (-36.08 kcal/mol), indicating that SO32- can readily activate Fe(VI) and generate ≡FeIV=O to attack the atoms with high Fukui index (f -) in organic pollutants. The above results confirm the feasibility of Fe(VI)/CaSO3 process. Thus, this study can theoretically and practically prove that the main active species is ≡FeIV=O, rather than SO4•- or •OH in Fe(VI)/CaSO3 process.

Synthesis of uniformly dispersed Fe2TiO5 nanodisks: a sensitive photoelectrochemical sensor for glucose monitoring in human blood serum

A novel photoelectrochemical (PEC) sensor was constructed, using Fe2TiO5 nanodisks under visible-light irradiation, for the determination of glucose in human blood serum. The uniformly dispersed Fe2TiO5 nanodisks were synthesized for the first time by an ion exchange method and subsequent heat treatment. As excellent catalysts, the Fe2TiO5 nanodisks can directly catalyze the oxidation of glucose to produce current in the absence of glucose oxidase. Compared with commercial TiO2, the Fe2TiO5 nanodisks exhibit better activity in the electrocatalytic oxidation of glucose and can generate a photocurrent as a signal for glucose detection. The PEC sensor shows a wide linear range (4 μM-10 mM), a low limit of detection (0.588 μM) and a super sensitivity of 2653 μA mM-1 cm-2, which are much better than similar configurations reported previously. This PEC sensor has been successfully used to monitor glucose in human blood serum. Moreover, this PEC glucose sensor based on Fe2TiO5 nanodisks possesses great potential for application in point-of-care clinical diagnosis.

Nb-doped NiO nanoflowers for nitrite electroreduction to ammonia

Electrocatalytic reduction of nitrite to ammonia (NO2RR) is considered as an appealing route to simultaneously achieve sustainable ammonia production and abate hazardous nitrite pollution. Herein, atomically Nb-doped NiO nanoflowers are designed as a high-performance NO2RR catalyst, which exhibits the highest NH3-Faradaic efficiency of 92.4% with an NH3 yield rate of 200.5 μmol h-1 cm-2 at -0.6 V RHE. Theoretical calculations unravel that Nb dopants can act as Lewis acid sites to render effective NO2- activation, decreased protonation energy barriers, and restricted hydrogen evolution, ultimately leading to a high NO2RR selectivity and activity.

Selective Electrocatalytic Oxidation of Nitrogen to Nitric Acid Using Manganese Phthalocyanine

Ammonia is produced through the energy-intensive Haber-Bosch process, which undergoes catalytic oxidation for the production of commercial nitric acid by the senescent Ostwald process. The two energy-intensive industrial processes demand for process sustainability. Hence, single-step electrocatalysis offers a promising approach toward a more environmentally friendly solution. Herein, we report a 10-electron pathway associated one-step electrochemical dinitrogen oxidation reaction (N₂OR) to nitric acid by manganese phthalocyanine (MnPc) hollow nano-structures under ambient conditions. The catalyst delivers a nitric acid yield of 513.2 μmol h^-1 g_cat^-1 with 33.9% Faradaic efficiency @ 2.1 V versus reversible hydrogen electrode. The excellent N₂OR performances are achieved due to the specific-selectivity, presence of greater number of exposed active sites, recyclability, and long period stability. The extended X-ray absorption fine structure confirms that Mn atoms are coordinated to the pyrrolic and pyridinic nitrogen via Mn-N₄ coordination. Density functional theory-based theoretical calculations confirm that the Mn-N₄ site of MnPc is the main active center for N₂OR, which suppresses the oxygen evolution reaction. This work provides a new arena about the successful example of one step nitric acid production utilizing a Mn-N₄ active site-based metal phthalocyanine electrocatalyst by dinitrogen oxidation for the development of a carbon-neutral sustainable society.

NiMoO4 nanorods with oxygen vacancies self-supported on Ni foam towards high-efficiency electrocatalytic conversion of nitrite to ammonia

As an eco-friendly and sustainable strategy, the electrochemical reduction of nitrite (NO₂^-) can simultaneous generation of NH₃ and treatment of NO₂^- contamination in the environment. Herein, monoclinic NiMoO₄ nanorods with abundant oxygen vacancies self-supported on Ni foam (NiMoO₄/NF) are considered high-performance electrocatalysts for ambient NH₃ synthesis by reduction of NO₂^-, which can deliver an outstanding yield of 18089.39 ± 227.98 μg h^-1 cm^-2 and a preferable FE of 94.49 ± 0.42% at -0.8 V. Additionally, its performance remains relatively stable during long-term operation as well as cycling tests. Furthermore, density functional theory calculations unveil the vital role of oxygen vacancies in promoting nitrite adsorption and activation, ensuring efficient NO₂^-RR towards NH₃. A Zn-NO₂^- battery with NiMoO₄/NF as the cathode shows high battery performance as well.