Green-solvent Processable Dopant-free Hole Transporting Materials for Inverted Perovskite Solar Cells

Enlarging moment and regulating orientation of buried interfacial dipole for efficient inverted perovskite solar cells

Carrier transport and recombination at the buried interface of perovskite have seriously restricted the further development of inverted perovskite solar cells (PSCs). Herein, an interfacial dipolar chemical bridge strategy to address this issue is presented. 2-(Diphenylphosphino) acetic acid (2DPAA) is selected as the linker to reconstruct the interfacial dipole, which effectively enlarges the interfacial dipole moment to 5.10 D and optimizes to a positive dipole orientation, thereby accelerating vertical hole transport, suppressing nonradiative recombination and promoting the perovskite crystallization. The champion inverted device yields a high power conversion efficiency (PCE) of 26.53% (certified 26.02%). Moreover, this strategy is extended to the wide-bandgap perovskite and large-area devices, which delivers high PCEs of 22.02% and 24.11%, respectively. The optimized devices without encapsulation also demonstrate great long-term shelf and operational stability. Our work highlights the importance of interfacial dipole moment and orientation at the buried interface to realize efficient and stable inverted PSCs.

Stabilization Strategies of Buried Interface for Efficient SAM-Based Inverted Perovskite Solar Cells

In recent years, self-assembled monolayers (SAMs) anchored on metal oxides (MO) have greatly boosted the performance of inverted (p-i-n) perovskite solar cells (PVSCs) by serving as hole-selective contacts due to their distinct advantages in transparency, hole-selectivity, passivation, cost-effectiveness, and processing efficiency. While the intrinsic monolayer nature of SAMs provides unique advantages, it also makes them highly sensitive to external pressure, posing a significant challenge for long-term device stability. At present, the stability issue of SAM-based PVSCs is gradually attracting attention. In this minireview, we discuss the fundamental stability issues arising from the structural characteristics, operating mechanisms, and roles of SAMs, and highlight representative works on improving their stability. We identify the buried interface stability concerns in three key aspects: 1) SAM/MO interface, 2) SAM inner layer, and 3) SAM/perovskite interface, corresponding to the anchoring group, linker group, and terminal group in the SAMs, respectively. Finally, we have proposed potential strategies for achieving excellent stability in SAM-based buried interfaces, particularly for large-scale and flexible applications. We believe this review will deepen understanding of the relationship between SAM structure and their device performance, thereby facilitating the design of novel SAMs and advancing their eventual commercialization in high-efficiency and stable inverted PVSCs.

Small-Molecule Hole Transport Materials for >26% Efficient Inverted Perovskite Solar Cells

Chemically modifiable small-molecule hole transport materials (HTMs) hold promise for achieving efficient and scalable perovskite solar cells (PSCs). Compared to emerging self-assembled monolayers, small-molecule HTMs are more reliable in terms of large-area deposition and long-term operational stability. However, current small-molecule HTMs in inverted PSCs lack efficient molecular designs that balance both the charge transport capability and interface compatibility, resulting in a long-standing stagnation of power conversion efficiency (PCE) below 24.5%. Here, we report the comprehensive design of HTMs' backbone and functional groups, which optimizes a simple planar linear molecular backbone with a high mobility exceeding 7.1 × 10-4 cm2 V-1 S-1 and enhances its interface anchoring capability. Owing to the improved surface properties and anchoring effects, the tailored HTMs enhance the interface contact at the HTM/perovskite heterojunction, minimizing nonradiative recombination and transport loss and leading to a high fill factor of 86.1%. Our work has overcome the persistent efficiency bottleneck for small-molecule HTMs, particularly for large-area devices. Consequently, the resultant PSCs exhibit PCEs of 26.1% (25.7% certified) for a 0.068 cm2 device and 24.7% (24.4% certified) for a 1.008 cm2 device, representing the highest PCE for small-molecule HTMs in inverted PSCs.

Inverse design workflow discovers hole-transport materials tailored for perovskite solar cells

The inverse design of tailored organic molecules for specific optoelectronic devices of high complexity holds an enormous potential but has not yet been realized. Current models rely on large data sets that generally do not exist for specialized research fields. We demonstrate a closed-loop workflow that combines high-throughput synthesis of organic semiconductors to create large datasets and Bayesian optimization to discover new hole-transporting materials with tailored properties for solar cell applications. The predictive models were based on molecular descriptors that allowed us to link the structure of these materials to their performance. A series of high-performance molecules were identified from minimal suggestions and achieved up to 26.2% (certified 25.9%) power conversion efficiency in perovskite solar cells.

Exploring the Potential and Hurdles of Perovskite Solar Cells with p-i-n Structure

The p-i-n architecture within perovskite solar cells (PSCs) is swiftly transitioning from an alternative concept to the forefront of perovskite photovoltaic technology, driven by significant advancements in performance and suitability for tandem solar cell integration. The relentless pursuit to increase efficiencies and understand the factors contributing to instability has yielded notable strategies for enhancing p-i-n PSC performance. Chief among these is the advancement in passivation techniques, including the application of self-assembled monolayers (SAMs), which have proven central to mitigating interface-related inefficiencies. This Perspective delves into a curated selection of recent impactful studies on p-i-n PSCs, focusing on the latest material developments, device architecture refinements, and performance optimization tactics. We particularly emphasize the strides made in passivation and interfacial engineering. Furthermore, we explore the strides and potential of p-i-n structured perovskite tandem solar cells. The Perspective culminates in a discussion of the persistent challenges facing p-i-n PSCs, such as long-term stability, scalability, and the pursuit of environmentally benign solutions, setting the stage for future research directives.

Fluoranthene imide dimers with strong isomeric effects on the charge transport properties

To date, the development of high-performance n-type organic semiconductors has remained challenging due to the scarcity of highly electron-deficient π-conjugated structural units and the difficulty of controlling intermolecular packing in the thin-film state. In addition, there have been few reports on the use of dimer design to tune the optoelectronic properties of materials. Herein, we report new cyano-substituted fluoranthene imide-based dimers (F16 and F17) for small-molecule n-type organic semiconductors. It is noteworthy that substituents at different positions lead to different film morphologies and very distinct thermal aggregation behaviors due to different dihedral angles. The self-assembly behavior of F17 improves thermal stability. Therefore, F17, which has a closer cyano groups structure, exhibits better field-effect transistor performance, with a maximum mobility of 6.6 × 10-4 cm2 V-1 s-1, while F16 does not exhibit any transistor performance.

Dibenzothiophene S, S-Dioxide-Containing Dipolar Molecules As Efficient Hole-Transport Materials for p-i-n Perovskite Solar Cells

Organic-inorganic hybrid perovskite solar cells (OIH-PSCs) have developed rapidly in the past decade, and the commercialization of OIH-PSCs demands low-cost hole-transport materials (HTMs) with high performance and stability. The present study synthesized two organic HTMs containing dibenzothiophene S-dioxide as the acceptor unit and triphenylamine as the donor (denoted by TPAF-SO2 and TPA-SO2). In TPAF-SO2, the methoxy group and adjacent fluorine atom were introduced to decrease the highest occupied molecular orbital energy level. In TPA-SO2, the methyl sulfide group is the end group that can passivate the lead ion. TPAF-SO2 and TPA-SO2 exhibit hole-transport mobilities as high as 1.12 × 10-3 and 2.31 × 10-3 cm2 v-1 s-1, respectively, and strongly passivate Pb vacancies. Compared with TPAF-SO2, TPA-SO2 is more suitable for the growth of perovskite crystals. The perovskite grown on the latter has a lower trap density and higher carrier mobility; thus, both the nonradiative recombination and the charge-transport loss are decreased. The OIH-PSC based on TPA-SO2 as the HTM achieved a power conversion efficiency (PCE) as high as 22.08%, whereas the device based on TPAF-SO2 achieved a PCE of only 18.42%. In addition, the unencapsulated device based on TPA-SO2 can maintain 85% of the initial PCE after being stored in N2 for 1200 h, whereas the device based on TPAF-SO2 decayed rapidly to zero in 800 h under the same conditions.

Solvent-Activated Transformation of Polymer Configurations for Advancing the Interfacial Reliability of Perovskite Photovoltaics

Organic materials have been widely used as the charge transport layers in perovskite solar cells due to their structural versatility and solution processability. However, their low surface energy usually causes unsatisfactory thin-film wettability in contact with the perovskite solution, which limits the interfacial performance of the photovoltaic devices. Although solvent post-treatment could occasionally regulate the wetting behavior of organic films, the mechanism of the solid-liquid interaction is still unclear. Here, we present evidence of a possible correlation between the solvent and the wettability of a conventional polymer, poly[bis(4-phenyl) (2,4,6-trimethylphenyl) amine] (PTAA), and reveal the critical roles of Hansen solubility parameters (HSPs) of solvents in wetting mechanisms. Our results suggest that the conventional solvent N,N-dimethylformamide (DMF) improves the wettability of PTAA by the morphological disruption mechanism but negatively impacts interfacial charge collection and stability. In contrast, 2-methoxyethanol (2-Me) with an appropriate HSP value induces the transformation of the PTAA configuration in an orderly manner, which simultaneously improves the wetting property and maintains the film topography. After careful optimization of the surface conformation of the PTAA film, both perovskite crystallization and interfacial compatibility have been enhanced. Benefiting from superior interfacial properties, the perovskite solar cells based on 2-Me deliver a champion efficiency of 24.15% compared to 21.4% for DMF-based ones. More encouragingly, the use of 2-Me minimizes the perovskite buried interfacial defects, enabling the unencapsulated devices to maintain about 95% of their initial efficiencies after light illumination for 1100 h. The present study demonstrates the high effectiveness of solvent-polymer interaction for adjusting interfacial properties and strengthening the robustness of perovskite solar cells.

Improvement of Perovskite Solar Cells Efficiency by Management of the Electron Withdrawing Groups in Hole Transport Materials: Theoretical Calculation and Experimental Verification

Management of functional groups in hole transporting materials (HTMs) is a feasible strategy to improve perovskite solar cells (PSCs) efficiency. Therefore, starting from the carbazole-diphenylamine-based JY7 molecule, JY8 and JY9 molecules are incorporated into the different electron-withdrawing groups of fluorine and cyano groups on the side chains. The theoretical results reveal that the introduction of electron-withdrawing groups of JY8 and JY9 can improve these highest occupied molecular orbital (HOMO) energy levels, intermolecular stacking arrangements, and stronger interface adsorption on the perovskite. Especially, the results of molecular dynamics (MD) indicate that the fluorinated JY8 molecule can yield a preferred surface orientation, which exhibits stronger interface adsorption on the perovskite. To validate the computational model, the JY7-JY9 are synthesized and assembled into PSC devices. Experimental results confirm that the HTMs of JY8 exhibit outstanding performance, such as high hole mobility, low defect density, and efficient hole extraction. Consequently, the PSC devices based on JY8 achieve a higher PCE than those of JY7 and JY9. This work highlights the management of the electron-withdrawing groups in HTMs to realize the goal of designing HTMs for the improvement of PSC efficiency.

The Renaissance of Poly(3-hexylthiophene) as a Promising Hole-Transporting Material Toward Efficient and Stable Perovskite Solar Cells

To push the commercialization of the promising photovoltaic technique of perovskite solar cells (PSCs), the three-element golden law of efficiency, stability, and cost should be followed. As the key component of PSCs, hole-transporting materials (HTMs) involving widely-used organic semiconductors such as 2,2',7,7'-tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (Spiro-OMeTAD) or poly(triarylamine) (PTAA) usually suffer high-cost preparation and low operational stability. Fortunately, the studies on the classical p-type polymer poly(3-hexylthiophene) (P3HT) as an alternative HTM have recently sparked a broad interest due to its low-cost synthesis, excellent batch-to-batch purity, superior hole conductivity as well as controllable and stable film morphology. Despite this, the device efficiency still lags behind P3HT-based PSCs mainly owing to the mismatched energy level and poor interfacial contact between P3HT and the perovskite layer. Hence, in this review, the study timely summarizes the developed strategies for overcoming the corresponding issues such as interface engineering, morphology regulation, and formation of composite HTMs from which some critical clues can be extracted to provide guidance for further boosting the efficiency and stability of P3HT-based devices. Finally, in the outlook, the future research directions either from the viewpoint of material design or device engineering are outlined.

3D Conjugated Hole Transporting Materials for Efficient and Stable Perovskite Solar Cells and Modules

The orthogonal structure of the widely used hole transporting material (HTM) 2,2',7,7'-tetrakis(N, N-di-p-methoxyphenylamino)-9,9'-spirobifluorene (Spiro-OMeTAD) imparts isotropic conductivity and excellent film-forming capability. However, inherently weak intra- and inter-molecular π-π interactions result in low intrinsic hole mobility. Herein, a novel HTM, termed FTPE-ST, with a twist conjugated dibenzo(g,p)chrysene core and coplanar 3,4-ethylenedioxythiophene (EDOT) as extended donor units, is designed to enhance π-π interactions, without compromising on solubility. The three-dimensional (3D) configuration provides the material multi-direction charge transport as well as excellent solubility even in 2-methylanisole, and its large conjugated backbone endows the HTM with a high hole mobility. Moreover, the sulfur donors in EDOT units coordinate with lead ions on the perovskite surface, leading to stronger interfacial interactions and the suppression of defects at the perovskite/HTM interface. As a result, perovskite solar cells (PSCs) employing FTPE-ST achieve a champion power conversion efficiency (PCE) of 25.21% with excellent long-time stability, one of the highest PCEs for non-spiro HTMs in n-i-p PSCs. In addition, the excellent film-forming capacity of the HTM enables the fabrication of FTPE-ST-based large-scale PSCs (1.0 cm2) and modules (29.0 cm2), which achieve PCEs of 24.21% (certificated 24.17%) and 21.27%, respectively.

Recent Progress in Dopant-Free and Green Solvent-Processable Organic Hole Transport Materials for Efficient and Stable Perovskite Solar Cells

Dopant-free hole transport layers (HTLs) are crucial in enhancing perovskite solar cells (pero-SCs). Nevertheless, conventional processing of these HTL materials involves using toxic solvents, which gives rise to substantial environmental concerns and renders them unsuitable for large-scale industrial production. Consequently, there is a pressing need to develop dopant-free HTL materials processed using green solvents to facilitate the production of high-performance pero-SCs. Recently, several strategies have been developed to simultaneously improve the solubility of these materials and regulate molecular stacking for high hole mobility. In this review, a comprehensive overview of the methodologies utilized in developing dopant-free HTL materials processed from green solvents is provided. First, the study provides a brief overview of fundamental information about green solvents and Hansen solubility parameters, which can serve as a guideline for the molecular design of optimal HTL materials. Second, the intrinsic relationships between molecular structure, solubility in green solvents, molecular stacking, and device performance are discussed. Finally, conclusions and perspectives are presented along with the rational design of highly efficient, stable, and green solvent-processable dopant-free HTL materials.

Dopant-Free Pyrene-Based Hole Transporting Material Enables Efficient and Stable Perovskite Solar Cells

Dopant-free hole transporting materials (HTMs) is significant to the stability of perovskite solar cells (PSCs). Here, we developed a novel star-shape arylamine HTM, termed Py-DB, with a pyrene core and carbon-carbon double bonds as the bridge units. Compared to the reference HTM (termed Py-C), the extension of the planar conjugation backbone endows Py-DB with typical intermolecular π-π stacking interactions and excellent solubility, resulting in improved hole mobility and film morphology. In addition, the lower HOMO energy level of the Py-DB HTM provides efficient hole extraction with reduced energy loss at the perovskite/HTM interface. Consequently, an impressive power conversion efficiency (PCE) of 24.33 % was achieved for dopant-free Py-DB-based PSCs, which is the highest PCE for dopant-free small molecular HTMs in n-i-p configured PSCs. The dopant-free Py-DB-based device also exhibits improved long-term stability, retaining over 90 % of its initial efficiency after 1000 h exposure to 25 % humidity at 60 °C. These findings provide valuable insights and approaches for the further development of dopant-free HTMs for efficient and reliable PSCs.

Suppressing Oxidation at Perovskite-NiOx Interface for Efficient and Stable Tin Perovskite Solar Cells

Inorganic nickel oxide (NiOx) is an ideal hole transport material (HTM) for the fabrication of high-efficiency, stable, and large-area perovskite photovoltaic devices because of its low cost, stability, and ease of solution processing. However, it delivers low power conversion efficiency (PCE) in tin perovskite solar cells (TPSCs) compared to other organic HTMs. Here, the origin of hole transport barriers at the perovskite-NiOx interface is identified and a self-assembled monolayer interface modification is developed, through introducing (4-(7H-dibenzo[c,g]carbazol-7-yl)ethyl)phosphonic acid (2PADBC) into the perovskite-NiOx interface. The 2PADBC anchors undercoordinated Ni cations through phosphonic acid groups, suppressing the reaction of highly active Ni≥3+ defects with perovskites, while increasing the electron density and oxidation activation energy of Sn at the perovskite interface, reducing the interface nonradiative recombination caused by tetravalent Sn defects. The devices deliver significantly increased open-circuit voltage from 0.712 to 0.825 V, boosting the PCE to 14.19% for the small-area device and 12.05% for the large-area (1 cm2) device. In addition, the 2PADBC modification enhances the operational stability of NiOx-based TPSCs, maintaining more than 93% of their initial efficiency after 1000 h.

De Novo Design of Spiro-Type Hole-Transporting Material: Anisotropic Regulation Toward Efficient and Stable Perovskite Solar Cells

2,2',7,7'-Tetrakis(N,N-di-p-methoxyphenyl)-amine-9,9'-spirobifluorene (Spiro-OMeTAD) represents the state-of-the-art hole-transporting material (HTM) in n-i-p perovskite solar cells (PSCs). However, its susceptibility to stability issues has been a long-standing concern. In this study, we embark on a comprehensive exploration of the untapped potential within the family of spiro-type HTMs using an innovative anisotropic regulation strategy. Diverging from conventional approaches that can only modify spirobifluorene with single functional group, this approach allows us to independently tailor the two orthogonal components of the spiro-skeleton at the molecular level. The newly designed HTM, SF-MPA-MCz, features enhanced thermal stability, precise energy level alignment, superior film morphology, and optimized interfacial properties when compared to Spiro-OMeTAD, which contribute to a remarkable power conversion efficiency (PCE) of 24.53% for PSCs employing SF-MPA-MCz with substantially improved thermal stability and operational stability. Note that the optimal concentration for SF-MPA-MCz solution is only 30 mg/ml, significantly lower than Spiro-OMeTAD (>70 mg/ml), which could remarkably reduce the cost especially for large-area processing in future commercialization. This work presents a promising avenue for the versatile design of multifunctional HTMs, offering a blueprint for achieving efficient and stable PSCs.

Cyano-Functionalized Pyrazine: A Structurally Simple and Easily Accessible Electron-Deficient Building Block for n-Type Organic Thermoelectric Polymers

Developing low-cost and high-performance n-type polymer semiconductors is essential to accelerate the application of organic thermoelectrics (OTEs). To achieve this objective, it is critical to design strong electron-deficient building blocks with simple structure and easy synthesis, which are essential for the development of n-type polymer semiconductors. Herein, we synthesized two cyano-functionalized highly electron-deficient building blocks, namely 3,6-dibromopyrazine-2-carbonitrile (CNPz) and 3,6-Dibromopyrazine-2,5-dicarbonitrile (DCNPz), which feature simple structures and facile synthesis. CNPz and DCNPz can be obtained via only one-step reaction and three-step reactions from cheap raw materials, respectively. Based on CNPz and DCNPz, two acceptor-acceptor (A-A) polymers, P(DPP-CNPz) and P(DPP-DCNPz) are successfully developed, featuring deep-positioned lowest unoccupied molecular orbital (LUMO) energy levels, which are beneficial to n-type organic thin-film transistors (OTFTs) and OTEs performance. An optimal unipolar electron mobility of 0.85 and 1.85 cm2  V-1  s-1 is obtained for P(DPP-CNPz) and P(DPP-DCNPz), respectively. When doped with N-DMBI, P(DPP-CNPz) and P(DPP-DCNPz) show high n-type electrical conductivities/power factors of 25.3 S cm-1 /41.4 μW m-1  K-2 , and 33.9 S cm-1 /30.4 μW m-1  K-2 , respectively. Hence, the cyano-functionalized pyrazine CNPz and DCNPz represent a new class of structurally simple, low-cost and readily accessible electron-deficient building block for constructing n-type polymer semiconductors.

Buried-Metal-Grid Electrodes for Efficient Parallel-Connected Perovskite Solar Cells

The limited conductivity of existing transparent conducting oxide (TCO) greatly restricts the further performance improvement of perovskite solar cells (PSCs), especially for large-area devices. Herein, buried-metal-grid tin-doped indium oxide (BMG ITO) electrodes are developed to minimize the power loss caused by the undesirable high sheet resistance of TCOs. By burying 140-nm-thick metal grids into ITO using a photolithography technique, the sheet resistance of ITO is reduced from 15.0 to 2.7 Ω sq-1 . The metal step of BMG over ITO has a huge impact on the charge carrier transport in PSCs. The PSCs using BMG ITO with a low metal step deliver power conversion efficiencies (PCEs) significantly better than that of their counterparts with higher metal steps. Moreover, compared with the pristine ITO-based PSCs, the BMG ITO-based PSCs show a smaller PCE decrease when scaling up the active area of devices. The parallel-connected large-area PSCs with an active area of 102.8 mm2 reach a PCE of 22.5%. The BMG ITO electrodes are also compatible with the fabrication of inverted-structure PSCs and organic solar cells. The work demonstrates the great efficacy of improving the conductivity of TCO by BMG and opens up a promising avenue for constructing highly efficient large-area PSCs.

Bifunctional Hole-Transport Materials with Modification and Passivation Effect for High-Performance Inverted Perovskite Solar Cells

Hole-transport materials (HTMs) play an important role in perovskite solar cells (PSCs) to enhance the power conversion efficiency (PCE). The innovation of HTMs can increase the hole extraction ability and reduce interfacial recombination. Three organic small molecule HTMs with 4H-cyclopenta[2,1-b:3,4-b']dithiophene (CPDT) as the central unit was designed and synthesized, namely, CPDTE-MTP (with the 2-ethylhexyl substituent and diphenylamine derivative end-group), CPDT-MTP (with the hexyl substituent and diphenylamine derivative end-group), and CPDT-PMTP (with the hexyl substituent and triphenylamine derivative end-group), which can form bifunctional and robust hole transport layer (HTL) on ITO and is tolerable to subsequent solvent and thermal processing. The X-ray photoelectron spectroscopy (XPS) results proved that CPDT-based HTMs can both interact with ITO through the nitrogen element in them and the tin element in ITO and passivate the upper perovskite layer. It is worth noting that the champion efficiency of MAPbI₃ PSCs based on CPDT-PMTP achieved 20.77%, with an open circuit voltage (V_OC) of 1.10 V, a short-circuit current (J_SC) of 23.39 mA cm^-2, and a fill factor (FF) of 80.83%, as three new materials were introduced into p-i-n PSCs as dopant-free HTMs.

Controlling Molecular Orientation of Small Molecular Dopant-Free Hole-Transport Materials: Toward Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have great potential for future application. However, the commercialization of PSCs is limited by the prohibitively expensive and doped hole-transport materials (HTMs). In this regard, small molecular dopant-free HTMs are promising alternatives because of their low cost and high efficiency. However, these HTMs still have a lot of space for making further progress in both efficiency and stability. This review firstly provides outlining analyses about the important roles of molecular orientation when further enhancements in device efficiency and stability are concerned. Then, currently studied strategies to control molecular orientation in small molecular HTMs are presented. Finally, we propose an outlook aiming to obtain optimized molecular orientation in a cost-effective way.