Degradation of Polylactic Acid/Polypropylene Carbonate Films in Soil and Phosphate Buffer and Their Potential Usefulness in Agriculture and Agrochemistry

Blends of poly(lactic acid) (PLA) with poly(propylene carbonate) (PPC) are currently in the phase of intensive study due to their promising properties and environmentally friendly features. Intensive study and further commercialization of PPC-based polymers or their blends, as usual, will soon face the problem of their waste occurring in the environment, including soil. For this reason, it is worth comprehensively studying the degradation rate of these polymers over a long period of time in soil and, for comparison, in phosphate buffer to understand the difference in this process and evaluate the potential application of such materials toward agrochemical and agricultural purposes. The degradation rate of the samples was generally accompanied by weight loss and a decrease in molecular weight, which was facilitated by the presence of PPC. The incubation of the samples in the aqueous media yielded greater surface erosions compared to the degradation in soil, which was attributed to the leaching of the low molecular degradation species out of the foils. The phytotoxicity study confirmed the no toxic impact of the PPC on tested plants, indicating it as a "green" material, which is crucial information for further, more comprehensive study of this polymer toward any type of sustainable application.

Research and Application of Polypropylene Carbonate Composite Materials: A Review

The greenhouse effect and plastic pollution caused by the accumulation of plastics have led to a global concern for environmental protection, as well as the development and application of biodegradable materials. Polypropylene carbonate (PPC) is a biodegradable polymer with the function of "carbon sequestration", which has the potential to mitigate the greenhouse effect and the plastic crisis. It has the advantages of good ductility, oxygen barrier and biocompatibility. However, the mechanical and thermal properties of PPC are poor, especially the low thermal degradation temperature, which limits its industrial use. In order to overcome this problem, PPC can be modified using environmentally friendly materials, which can also reduce the cost of PPC-based products to a certain extent and enhance their competitiveness in terms of improving their mechanical and thermal properties. In this paper, we present different perspectives on the synthesis, properties, degradation, modification and post-modification applications of PPC. The modification part mainly introduces the influence of inorganic materials, natural polymer materials and degradable polymers on the performance of PPC. It is hoped that this work will serve as a reference for the early promotion of PPC.

Polyetheretherketone and Its Composites for Bone Replacement and Regeneration

In this article, recent advances in the development, preparation, biocompatibility and mechanical properties of polyetheretherketone (PEEK) and its composites for hard and soft tissue engineering are reviewed. PEEK has been widely employed for fabricating spinal fusions due to its radiolucency, chemical stability and superior sterilization resistance at high temperatures. PEEK can also be tailored into patient-specific implants for treating orbital and craniofacial defects in combination with additive manufacturing process. However, PEEK is bioinert, lacking osseointegration after implantation. Accordingly, several approaches including surface roughening, thin film coating technology, and addition of bioactive hydroxyapatite (HA) micro-/nanofillers have been adopted to improve osseointegration performance. The elastic modulus of PEEK is 3.7-4.0 GPa, being considerably lower than that of human cortical bone ranging from 7-30 GPa. Thus, PEEK is not stiff enough to sustain applied stress in load-bearing orthopedic implants. Therefore, HA micro-/nanofillers, continuous and discontinuous carbon fibers are incorporated into PEEK for enhancing its stiffness for load-bearing applications. Among these, carbon fibers are more effective than HA micro-/nanofillers in providing additional stiffness and load-bearing capabilities. In particular, the tensile properties of PEEK composite with 30wt% short carbon fibers resemble those of cortical bone. Hydrophobic PEEK shows no degradation behavior, thus hampering its use for making porous bone scaffolds. PEEK can be blended with hydrophilic polymers such as polyglycolic acid and polyvinyl alcohol to produce biodegradable scaffolds for bone tissue engineering applications.

Polyurethanes from Direct Organocatalytic Copolymerization of p-Tosyl Isocyanate with Epoxides

The direct copolymerization of p-tosyl isocyanate (TSI) with epoxides, initiated by onium salts in the presence of trialkylborane, to produce polyurethanes is reported. The rate of copolymerization and the (regio)selectivity were investigated in relation to the trialkylborane and the initiator used. Under optimized conditions such copolymerizations have been successfully performed for a wide range of epoxides, including ethylene oxide, propylene oxide, 1-octene oxide, cyclohexene oxide, and allyl glycidyl ether. These copolymerizations afford a new category of polyurethanes, clear of side products such as cyclic oxazolidinone, isocyanurate, and poly(isocyanate) linkages. The experimental conditions used in this work are compatible with those for the organocatalytic (co)polymerization of other oxygenated monomers and CO₂ , holding the potential for their terpolymerization with p-tosyl isocyanate and the development of new materials with unprecedented properties.

Review on the Biological Degradation of Polymers in Various Environments

Biodegradable plastics can make an important contribution to the struggle against increasing environmental pollution through plastics. However, biodegradability is a material property that is influenced by many factors. This review provides an overview of the main environmental conditions in which biodegradation takes place and then presents the degradability of numerous polymers. Polylactide (PLA), which is already available on an industrial scale, and the polyhydroxyalkanoates polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-valerate (PHBV), which are among the few plastics that have been proven to degrade in seawater, will be discussed in detail, followed by a summary of the degradability of further petroleum-, cellulose-, starch-, protein- and CO₂-based biopolymers and some naturally occurring polymers.

Synthetic Biodegradable Aliphatic Polyester Nanocomposites Reinforced with Nanohydroxyapatite and/or Graphene Oxide for Bone Tissue Engineering Applications

This paper provides review updates on the current development of bionanocomposites with polymeric matrices consisting of synthetic biodegradable aliphatic polyesters reinforced with nanohydroxyaptite (nHA) and/or graphene oxide (GO) nanofillers for bone tissue engineering applications. Biodegradable aliphatic polyesters include poly(lactic acid) (PLA), polycaprolactone (PCL) and copolymers of PLA-PGA (PLGA). Those bionanocomposites have been explored for making 3D porous scaffolds for the repair of bone defects since nHA and GO enhance their bioactivity and biocompatibility by promoting biomineralization, bone cell adhesion, proliferation and differentiation, thus facilitating new bone tissue formation upon implantation. The incorporation of nHA or GO into aliphatic polyester scaffolds also improves their mechanical strength greatly, especially hybrid GO/nHA nanofilllers. Those mechanically strong nanocomposite scaffolds can support and promote cell attachment for tissue growth. Porous scaffolds fabricated from conventional porogen leaching, and thermally induced phase separation have many drawbacks inducing the use of organic solvents, poor control of pore shape and pore interconnectivity, while electrospinning mats exhibit small pores that limit cell infiltration and tissue ingrowth. Recent advancement of 3D additive manufacturing allows the production of aliphatic polyester nanocomposite scaffolds with precisely controlled pore geometries and large pores for the cell attachment, growth, and differentiation in vitro, and the new bone formation in vivo.

Highly elastic and degradable thermoset elastomers from CO2-based polycarbonates and bioderived polyesters

The first example of CO₂-based thermoset elastomers (CO₂Es) on the basis of two sustainable and degradable polymers, rigid CO₂-based polycarbonates and soft polyesters, is reported.

Flexible Organic Thin Film Transistors Incorporating a Biodegradable CO2-Based Polymer as the Substrate and Dielectric Material

Employing CO₂-based polymer in electronic applications should boost the consumption of CO₂ feedstocks and provide the potential for non-permanent CO₂ storage. In this study, polypropylene carbonate (PPC) is utilized as a dielectric and substrate material for organic thin film transistors (OTFTs) and organic inverter. The PPC dielectric film exhibits a surface energy of 47 mN m⁻¹, a dielectric constant of 3, a leakage current density of less than 10⁻⁶ A cm⁻², and excellent compatibility with pentacene and PTCDI-C8 organic semiconductors. Bottom-gate top-contact OTFTs are fabricated using PPC as a dielectric; they exhibits good electrical performance at an operating voltage of 60 V, with electron and hole mobilities of 0.14 and 0.026 cm² V⁻¹ s⁻¹, and on-to-off ratios of 10⁵ and 10³, respectively. The fabricated p- and n-type transistors were connected to form a complementary inverter that operated at supply voltages of 20 V with high and low noise margins of 85 and 69%, respectively. The suitability of PPC as a substrate is demonstrated through the preparation of PPC sheets by casting method. The fabricated PPC sheets has a transparency of 92% and acceptable mechanical properties, yet they biodegraded rapidly through enzymatic degradation when using the lipase from Rhizhopus oryzae.

Acid-Labile Surfactants Based on Poly(ethylene glycol), Carbon Dioxide and Propylene Oxide: Miniemulsion Polymerization and Degradation Studies

Partially degradable, nonionic AB and ABA type di- and triblock copolymers based on poly(propylene carbonate) and poly(ethylene glycol) blocks were synthesized via immortal copolymerization of carbon dioxide and propylene oxide, using mPEG or PEG as a macroinitiator, and (R,R)-(salcy)-CoOBzF₅ as a catalyst in a solvent-free one-pot procedure. The amphiphilic surfactants were prepared with molecular weights (M_n) between 2800 and 10,000 g·mol^-¹ with narrow molecular weight distributions (1.03⁻1.09). The copolymers were characterized using ¹H-, ¹³C- and DOSY-NMR spectroscopy and size exclusion chromatography (SEC). Surface-active properties were determined by surface tension measurements (critical micelle concentration, CMC; CMC range: 1⁻14 mg·mL^-¹). Degradation of the acid-labile polycarbonate blocks was investigated in aqueous solution using online ¹H-NMR spectroscopy and SEC. The amphiphilic polymers were used as surfactants in a direct miniemulsion polymerization for poly(styrene) (PS) nanoparticles with mean diameter of 270 to 940 nm. The usage of an acid-triggered precipitation of the emulsion simplified the separation of the particles from the surfactant and purification of the nanoparticles.

Polyetheretherketone Hybrid Composites with Bioactive Nanohydroxyapatite and Multiwalled Carbon Nanotube Fillers

Polyetheretherketone (PEEK) hybrid composites reinforced with inorganic nanohydroxyapatite (nHA) and multiwalled carbon nanotube (MWNT) were prepared by melt-compounding and injection molding processes. The additions of nHA and MWNT to PEEK were aimed to increase its elastic modulus, tensile strength, and biocompatibility, rendering the hybrids suitable for load-bearing implant applications. The structural behavior, mechanical property, wettability, osteoblastic cell adhesion, proliferation, differentiation, and mineralization of the PEEK/nHA-MWNT hybrids were studied. X-ray diffraction and SEM observation showed that both nHA and MWNT fillers are incorporated into the polymer matrix of PEEK-based hybrids. Tensile tests indicated that the elastic modulus of PEEK can be increased from 3.87 to 7.13 GPa by adding 15 vol % nHA and 1.88 vol % MWNT fillers. The tensile strength and elongation at break of the PEEK/(15% nHA)-(1.88% MWNT) hybrid were 64.48 MPa and 1.74%, respectively. Thus the tensile properties of this hybrid were superior to those of human cortical bones. Water contact angle measurements revealed that the PEEK/(15% nHA)-(1.88% MWNT) hybrid is hydrophilic due to the presence of nHA. Accordingly, hydrophilic PEEK/(15% nHA)-(1.88% MWNT) hybrid promoted the adhesion, proliferation, differentiation, and mineralization of murine MC3T3-E1 osteoblasts on its surface effectively on the basis of cell culture, fluorescence microscopy, MTT assay, WST-1 assay, alkaline phosphatase activity, and Alizarin red staining tests. Thus the PEEK/(15% nHA)-(1.88% MWNT) hybrid has the potential to be used for fabricating load-bearing bone implants.

Preparation, characterization and properties of nano-hydroxyapatite/polypropylene carbonate biocomposite

The combination of nano-hydroxyapatite (n-HA) and polypropylene carbonate (PPC) was used to make a composite materials by a coprecipitation method. The physical and chemical properties of the composite were tested. Scanning electron microscope (SEM) observation indicated that the biomimetic n-HA crystals were uniformly distributed in the polymer matrix. As the n-HA content increased in the composite, the fracture mechanism of the composites changes from gliding fracture to gliding and brittle fracture. Furthermore, the chemical interaction between inorganic n-HA and polypropylene carbonate was also investigated and discussed in detail. The hydrogen bonds might be formed between -OH/CO3(2-) of n-HA crystal and the ester group (-COO-) of PPC. The tensile strength of n-HA/PPC (40/60) was similar to that of the cancellous bone, and reached ca 58 MPa. The osteoblasts were cultured for up to 7 days, and then the adhesion and proliferation of osteoblasts were measured by Methyl thiazolyl tetrazolium (MTT) colorimetry assay and SEM. The cells proliferated, grew normally in fusiform shape and well attached. The in vitro test confirmed that the n-HA/PPC composites were biocompatible and showed undetectable negative effect on osteoblasts. In vivo implantation of the composite in New Zealand white rabbits was performed. It can stimulate the growth of a new bone, and at the same time the material begins to degrade. These results suggested that the composite may be suitable for the reparation or replacement of bone defects and possessed the potential for clinical applications.

Preparation of polyetheretherketone composites with nanohydroxyapatite rods and carbon nanofibers having high strength, good biocompatibility and excellent thermal stability

The WST-1 assay shows that the PEEK/15 vol% nHA–1.9 vol% CNF hybrid composite has excellent biocompatibility.

Sustained delivery of chondroitinase ABC by poly(propylene carbonate)-chitosan micron fibers promotes axon regeneration and functional recovery after spinal cord hemisection

We describe the sustained delivery of chondroitinase ABC (ChABC) in the hemisected spinal cord using polypropylene carbonate (PPC) electrospun fibers with chitosan (CS) microspheres as a vehicle. PPC and ChABC-loaded CS microspheres were mixed with acetonitrile, and micron fibers were generated by electrospinning. ChABC release was assessed in vitro with high-performance liquid chromatography (HPLC) and revealed stabilized and prolonged release. Moreover, the released ChABC showed sustained activity. PPC-CS micron fibers with or without ChABC were then implanted into a hemisected thoracic spinal cord. In the following 4 weeks, we examined functional recovery and performed immunohistochemical analyses. We found that sustained delivery of ChABC promoted axon sprouting and functional recovery and reduced glial scarring; PPC-CS micron fibers without ChABC did not show these effects. The present findings suggest that PPC-CS micron fibers containing ChABC are a feasible option for spinal cord injury treatment. Furthermore, the system described here may be useful for local delivery of other therapeutic agents.

Polypropylene Biocomposites with Boron Nitride and Nanohydroxyapatite Reinforcements

In this study, we develop binary polypropylene (PP) composites with hexagonal boron nitride (hBN) nanoplatelets and ternary hybrids reinforced with hBN and nanohydroxyapatite (nHA). Filler hybridization is a sound approach to make novel nanocomposites with useful biological and mechanical properties. Tensile test, osteoblastic cell culture and dimethyl thiazolyl diphenyl tetrazolium (MTT) assay were employed to investigate the mechanical performance, bioactivity and biocompatibility of binary PP/hBN and ternary PP/hBN-nHA composites. The purpose is to prepare biocomposite nanomaterials with good mechanical properties and biocompatibility for replacing conventional polymer composites reinforced with large hydroxyapatite microparticles at a high loading of 40 vol%. Tensile test reveals that the elastic modulus of PP composites increases, while tensile elongation decreases with increasing hBN content. Hybridization of hBN with nHA further enhances elastic modulus of PP. The cell culture and MTT assay show that osteoblastic cells attach and proliferate on binary PP/hBN and ternary PP/hBN-20%nHA nanocomposites.

Melt-compounded polylactic acid composite hybrids with hydroxyapatite nanorods and silver nanoparticles: biodegradation, antibacterial ability, bioactivity and cytotoxicity

PLA/18% nHA–2% Ag and PLA/18% nHA–6% Ag nanocomposites showing zone of inhibition againstE. coli.

Efficient synthesis and stabilization of poly(propylene carbonate) from delicately designed bifunctional aluminum porphyrin complexes

Bifunctional aluminum porphyrin complexes were prepared, which showed good catalytic performance for copolymerization of propylene oxide and carbon dioxide, and the resulting poly(propylene carbonate) could be stabilized by treatment of aqueous HCl solution.

Sustained delivery of dbcAMP by poly(propylene carbonate) micron fibers promotes axonal regenerative sprouting and functional recovery after spinal cord hemisection

This study describes the use of poly(propylene carbonate) (PPC) electrospun fibers as vehicle for the sustained delivery of dibutyryl cyclic adenosine monophosphate (dbcAMP) to the hemisected spinal cord. The dbcAMP and PPC were uniformly mixed with acetonitrile; then, electrospinning was used to generate micron fibers. The release of dbcAMP was assessed by ELISA in vitro. Our results showed that the encapsulation of dbcAMP in the fibers led to stable and prolonged release in vitro. The PPC micron fibers containing dbcAMP and the PPC micron fibers without dbcAMP were then implanted into the hemisected thoracic spinal cord, followed by testing of the functional recovery and immunohistochemistry. Compared with the control group, sustained delivery of dbcAMP promoted axonal regenerative sprouting and functional recovery and reduced glial scar formation, and the PPC micron fibers without dbcAMP did not have these effects. Our findings demonstrated the feasibility of using PPC electrospun fibers containing dbcAMP for spinal cord injury. The approach described here also will provide a platform for the potential delivery of other axon-growth-promoting or scar-inhibiting agents.

Preparation and properties of biodegradable polymeric blends from poly(propylene carbonate) and poly(ethylene-co-vinyl alcohol)

Biodegradable blends of poly(propylene carbonate)/ethylene-vinyl alcohol copolymers (PPC/EVOH) were melt prepared. The mechanical strength, crystallization and melting behavior, morphologies, and thermal properties of these blends were fully investigated using tensile tester, modulated differential scanning calorimetry, scanning electron microscopy, and thermogravimetric analysis, respectively. The results indicated that the thermal stability of blends could be enhanced by increasing EVOH content. No change was observed for the tensile strength when EVOH content was lower than 30 wt %. The tensile strength, however, increased obviously with increasing EVOH content when EVOH content was higher than 30 wt %. The crystallization behavior of the PPC/EVOH blends was studied accordingly. The degradability test showed that the weight loss of PPC/EVOH blends increased with increasing EVOH content because of the strong moisture sorption of EVOH. Morphology observation indicated that the PPC/EVOH blends exhibited a two-phase microstructure. The blends with EVOH contents ranging from 40 to 60 wt % showed the best comprehensive properties as biodegradable thermoplastic for many applications.

Electrospun aliphatic polycarbonates as tailored tissue scaffold materials

Two different aliphatic polycarbonates were synthesised from CO(2) and the respective epoxides. Poly(propyl carbonate) (PPC) was prepared by heterogeneous catalysis with zinc glutarate. Poly(cyclohexyl carbonate) (PCHC) was prepared via living copolymerisation homogeneously catalysed by a 3-amino-2-cyanoimidoacrylate zinc acetate complex and subjected to electrospinning. The obtained nanofibres had a well-defined morphology free of beads along the fibres and with slightly porous structures on their surface. Subsequently, low-power deep UV irradiations, previously applied for photochemical surface modifications of two-dimensional and three-dimensional scaffolds from biostable polymers, were performed. Here, an effect on surface and bulk properties of PPC nanofibres was observed. Surface modifications of both polymers affected plasma protein adsorption. Photochemical bulk modifications observed for the first time on PPC nanofibres are indicating the possibility of spatial control of biodegradation rates, hence allow for control of the progression of host/implant interactions in vivo. In particular PPC was used for cell culture of L929 fibroblasts and primary rat hepatocytes. Even delicate primary cells showed good adhesion to the scaffolds and high viability.