Tailoring the Wettability and Substrate Adherence of Thin Polymer Films with Surface-Segregating Bottlebrush Copolymer Additives

We developed "reactive" bottlebrush polymers based on styrene (S) and t-butyl acrylate (tBA) as additives for polystyrene (PS) coatings. The bottlebrush polymers spontaneously bloom to both the air and substrate interfaces during solution casting. While neat PS films are hydrophobic and poorly adhere to the native oxide on clean silicon wafers, the hydrophilicity and substrate adherence of bottlebrush-incorporating PS films can be tailored through the thermally activated deprotection of tBA to produce acrylic acid (AA) and acrylic anhydride (AH). A critical design parameter is the manner by which tBA is incorporated into the bottlebrush: When the bottlebrush side chains are copolymers of S and tBA, the extent of deprotection is extremely low, even after prolonged thermal annealing at elevated temperature. However, when the bottlebrush contains a mixture of poly(t-butyl acrylate) (PtBA) and PS side chains, nearly all tBA is converted to AA and AH. Consequently, using the "mixed-chain" bottlebrush design with thermal processing and appropriate conditioning, the water contact angle is reduced from over 90° on unmodified PS down to 75° on bottlebrush-incorporating PS films, and the substrate adherence is improved in proportion to the extent of tBA deprotection.

Delivery of pharmaceuticals and other active ingredients with their crystalline cyclodextrin inclusion compounds

In honor of Prof. Thorsteinn Loftsson's 70th birthday, we offer this personal review of our work using cyclodextrins (CDs) complexed with a variety of active ingredients, including pharmaceuticals, for the purpose of improving their delivery to polymer materials, e.g., fibers, films, hydrogels, etc. Using the affinity of CDs to host and form non-covalent inclusion complexes (ICs) with guest molecules, including a variety of high molecular weight polymers, it is possible to readily deliver these guest molecules into polymer materials via either melt or solution processing of their crystalline or soluble guest molecule-CD-ICs or -rotaxanes. This provides the following advantages: i. CDs are non-toxic, implantable, and biodegradable and have earned the GRAS rating from the FDA. ii. Guest molecules, even those that are neat liquids, can form solid crystalline CD-ICs that are thermally stable to ~ 200 °C and above. This approach permits facile melt-processing into polymer materials for delivery without migration, loss, or degradation of the active guest ingredient. iii. For guests harmful and toxic to their users and the environment, delivery in the form of crystalline CD-ICs can limit any contact with and release of the included toxic guests before they function and are used. iv. It has been demonstrated that, by simple precipitation methods, neat as-received CDs that adopt cage crystal structures can be readily transformed to their columnar crystal structures containing only water in their channels, which can be easily displaced by small molecule, as well as polymer guests. v. Guest-CD-rotaxanes are water soluble, they protect the threaded guest from sources of degradation, and the CD hydroxyl groups may be modified to direct the guest-CD-rotaxane to specific substrates. For these reasons, here we summarize our contributions to the study of CD inclusion and delivery of a variety of guest molecules, including antibacterials, spermicides, insecticides, flame retardants, and dyes, that can more usefully functionalize polymer materials.

The interaction of bacteria with engineered nanostructured polymeric materials: a review

Bacterial infections are a leading cause of morbidity and mortality worldwide. In spite of great advances in biomaterials research and development, a significant proportion of medical devices undergo bacterial colonization and become the target of an implant-related infection. We present a review of the two major classes of antibacterial nanostructured materials: polymeric nanocomposites and surface-engineered materials. The paper describes antibacterial effects due to the induced material properties, along with the principles of bacterial adhesion and the biofilm formation process. Methods for antimicrobial modifications of polymers using a nanocomposite approach as well as surface modification procedures are surveyed and discussed, followed by a concise examination of techniques used in estimating bacteria/material interactions. Finally, we present an outline of future sceneries and perspectives on antibacterial applications of nanostructured materials to resist or counteract implant infections.

Structural differences between chitin and chitosan extracted from three different marine sources

Three marine sources of chitin from Tunisia were investigated. Structural differences between α-chitin from shrimp (Penaeus kerathurus) waste, crab (Carcinus mediterraneus) shells, and β-chitin from cuttlefish (Sepia officinalis) bones were studied by the (13)C NMR, FTIR, and XRD diffractograms. The (13)C NMR analysis showed a splitting of the C3 and C5 carbon signals for α-chitin, while that of β-chitin was merged into a single resonance. The bands contour of deconvoluted and curve-fit FTIR spectra showed a more detailed structure of α-chitin in the region of O-H, N-H and CO stretching regions. IR and (13)C NMR were used to determine the chitin degree of acetylation (DA). XRD analysis indicated that α-chitins were more crystalline polymorph than β-chitin. Shrimp chitin was obtained with a good yield (20% on raw material dry weight) and no residual protein and salts. Chitosans, with a DA lower than 20% and relatively low molecular masses were prepared from the wet chitins in the same experimental conditions. They were perfectly soluble in acidic medium. Nevertheless, chitin and chitosan characteristics were depending upon the chitin source.

Generation and properties of antibacterial coatings based on electrostatic attachment of silver nanoparticles to protein-coated polypropylene fibers

We present a simple method for attaching silver nanoparticles to polypropylene (PP) fibers in a two-step process to impart antibacterial properties. Specifically, PP fibers are pretreated by the adsorption from an aqueous solution of heat-denatured lysozyme (LYS) followed by LYS cross-linking using glutaraldehyde and sodium borohydride. At neutral pH, the surface of the adsorbed LYS layer is enriched with numerous positive charges. Silver nanoparticles (AgNPs) capped with trisodium citrate are subsequently deposited onto the protein-coated PP. Nanoparticle binding is mediated by electrostatic interactions between the positively charged LYS layer and the negatively charged AgNPs. The density of AgNPs deposited on PP depends on the amount of protein adsorbed on the surface. UV-vis spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and scanning electron microscopy are employed to follow all preparation steps and to characterize the resulting functional surfaces. The antibacterial activity of the modified surfaces is tested against gram negative bacteria Escherichia coli (E. coli). Overall, our results show that PP surfaces coated with AgNPs exhibit excellent antibacterial activity with 100% removal efficiency.

Marine glycobiology: current status and future perspectives

Glycobiology, which is the study of the structure and function of carbohydrates and carbohydrate containing molecules, is fundamental to all biological systems.Progress in glycobiology has shed light on a range of complex biological processes associated with, for example,disease and immunology, molecular and cellular communication,and developmental biology. There is an established,if rather modest, tradition of glycobiology research in marine systems that has primarily focused on reproduction,biofouling, and chemical communication. The current status of marine glycobiology research is primarily descriptive with very limited progress on structural elucidation and the subsequent definition of precise functional roles beyond a small number of classical examples, e.g., induction of the acrosome reaction in echinoderms. However, with recent advances in analytical instrumentation, there is now the capacity to begin to characterize marine glycoconjugates,many of which will have potential biomedical and biotechnological applications. The analytical approach to glycoscience has developed to such an extent that it has acquired its own "-omics" identity. Glycomics is the quest to decipher the complex information conveyed by carbohydrate molecules--the carbohydrate code or glycocode. Due to the paucity of structural information available, this article will highlight the fundamental importance of glycobiology for many biological processes in marine organisms and will draw upon the best defined systems. These systems therefore may prove genuine candidates for full carbohydrate characterization.

Polysaccharides coatings on medical-grade PVC: a probe into surface characteristics and the extent of bacterial adhesion

Medical-grade polyvinyl chloride was coated by polysaccharides through a novel physicochemical approach. An initial surface activation was performed foremost via diffuse coplanar surface barrier discharge plasma in air at ambient temperature and pressure. Then, radical graft copolymerization of acrylic acid through grafting-from pathway was directed to render a well-defined brush of high density, and finally a chitosan monolayer and chitosan/pectin alternating multilayer were bound onto the functionalized surfaces. Surface characteristics were systematically investigated using several probe techniques. In vitro bacterial adhesion and biofilm formation assays indicated that a single chitosan layer was incapable of hindering the adhesion of a Staphylococcus aureus bacterial strain, while up to 30% reduction was achieved by the chitosan/pectin layered assembly. On the other hand, chitosan and chitosan/pectin multilayer could retard Escherichia coli adhesion by 50% and 20%, respectively. Furthermore, plasma treated and graft copolymerized samples were also found effective to diminish the degree of adherence of Escherichia coli.