Characterizations of chitosan-based highly porous hydrogel-The effects of the solvent

A Thermosensitive, Chitosan-Based Hydrogel as Delivery System for Antibacterial Liposomes to Surgical Site Infections

Prophylaxis and the treatment of surgical site infections (SSIs) with antibiotics frequently fail due to the antibiotic resistance of bacteria and the ability of bacteria to reside in biofilms (i.e., bacterial clusters in a protective matrix). Therefore, alternative antibacterial treatments are required to combat biofilm infections. The combination of diethyldithiocarbamate (DDC^-) and copper ions (Cu²⁺) exhibited antibiofilm activity against the staphylococci species associated with SSIs; however, the formation of a water-insoluble Cu(DDC)₂ complex limits its application to SSIs. Here, we describe the development and antibiofilm activity of an injectable gel containing a liposomal formulation of Cu(DDC)₂ and Cu²⁺ (lipogel). Lyophilized liposomes were incorporated into a mixture of chitosan (CS) and beta-glycerophosphate (βGP), and the thermosensitive gelling properties of CS-βGP and the lipogel were determined. The liposomes remained stable after lyophilization over six months at 4-6 °C and -20 °C. The sol-gel transition of the gel and lipogel occurred between 33 and 39 °C, independently of sterilization or storage at -20 °C. CS-βGP is biocompatible and the liposomes were released over time. The lipogel prevented biofilm formation over 2 days and killed 98.7% of the methicillin-resistant Staphylococcus aureus and 99.9% of the Staphylococcus epidermidis biofilms. Therefore, the lipogel is a promising new prophylaxis and treatment strategy for local application to SSIs.

Recent Advances in Design Strategies of Tough Hydrogels

Hydrogels are a fascinating class of materials popular in numerous fields, including tissue engineering, drug delivery, soft robotics, and sensors, attributed to their 3D network porous structure containing a significant amount of water. However, traditional hydrogels exhibit poor mechanical strength, limiting their practical applications. Thus, many researchers have focused on the development of mechanically enhanced hydrogels. This review describes the design considerations for constructing tough hydrogels and some of the latest strategies in recent years. These tough hydrogels have an up-and-coming prospect and bring great hope to the fields of biomedicine and others. Nonetheless, it is still no small challenge to realize hydrogel materials that are tough, multifunctional, intelligent, and zero-defect. This article is protected by copyright. All rights reserved.

Selected Phase Separation Renders High Strength and Toughness to Polyacrylamide/Alginate Hydrogels with Large-Scale Cross-Linking Zones

High water content usually contradicts the mechanics for hydrogels, and achieving both characteristics is extremely challenging. Herein, a novel confined-chain-aggregation (CCA) strategy is developed to fabricate ultrastrong and tough hydrogels without sacrificing their inherent water capacity. Based on the popular polyacrylamide/alginate (PAAm/Alg) system with a double network (DN), a poor solvent exchange is induced once PAAm is fully cross-linked but prior to ionic cross-linking of alginate. In this case, the alginate chains are restricted by the chemical PAAm network and undergo a confined-chain aggregation, which guarantees an interpenetrating network of both polymers and simultaneously generates micron-scale aggregates. In addition, after the subsequent water uptake, the accompanying formation of hydrogen bonds and metal-ligand coordination stabilizes the newly formed alginate aggregates, serving as large-scale cross-linking zones. However, the PAAm chains are anchored by the preformed cross-linking points and convert back to the uniformly distributed, high-water-content state, achieving a selected phase separation in a DN system. The combined CCA and hybrid cation cross-linking method gives mechanical strength and toughness to the PAAm/Alg hydrogels to reach approximately 30 and 5 times the traditional methods, respectively. This investigation provides a general strategy for the development of a new generation of double-network hydrogels, which will expand their application as structural materials for cartilage and soft robotics.

Cell-Laden Thermosensitive Chitosan Hydrogel Bioinks for 3D Bioprinting Applications

Three-dimensional (3D) bioprinting is a technology used to deposit cell-laden biomaterials for the construction of complex tissues. Thermosensitive hydrogels are physically cross-linked by non-covalent interaction without using crosslinkers, facilitating low cytotoxicity and cell viability. Chitosan, which is a non-toxic, biocompatible and biodegradable polysaccharide, can be used as a thermosensitive hydrogel. Therefore, chitosan hydrogel could be of potential use as a 3D bioprinting ink. The purpose of this study was to develop and compare the effectivity of different bioinks based on chitosan hydrogels for 3D bioprinting. The solvent type did not affect the gel shape and gelation time, whereas acetic acid exhibited better biocompatibility compared to lactic and hydrochloric acids. The nature of the gelling agent was found to have a stronger influence on these characteristics than that of the solvent. The NaHCO3 moiety exhibited a higher growth rate of the storage modulus (G′) and a more irregular porous structure than that of the β-glycerophosphate (β-GP) and K2HPO4 groups. Cell viability, and live and dead assays, showed that the NaHCO3 group was more efficient for cell adhesion. The type of gelling agent did not lead to appreciable differences in cell-laden constructs. The NaHCO3 group was more amenable to bioprinting, compared to the β-GP and K2HPO4 groups. The chitosan hydrogel bioinks could, therefore, be good candidates for 3D bioprinting and would pave the way for patient-specific regenerative medicines.

Biomimetic TiO2-chitosan/sodium alginate blended nanocomposite scaffolds for tissue engineering applications

The study is aimed to synthesize potent metal oxide based biomimetic nanocomposites to overcome the risk associated with artificial bone tissue engineering. High purity TiO₂ nanoparticles are synthesized via hydrothermal route. A biomimetic nanocomposite scaffolds containing chitosan-sodium alginate (4: 4) blended with three different (0.5, 1, and 1.5 wt%) concentrations of hydrothermally synthesized TiO₂ nanoparticles are obtained by solvent casting technique. The physico-chemical and thermal degradation properties of as-synthesized TiO₂ nanoparticles and their nanocomposite scaffolds are analyzed. In-vitro cytotoxicity and biocompatibility of the prepared TiO₂ nanoparticles and nanocomposites are tested against human bladder tumor (UC6) and osteosarcoma (MG-63) cell lines. Antibacterial property is tested against Escherichia coli and Staphylococcus aureus. These studies reveal that TiO₂ nanoparticles and polymeric nanocomposites contain good physico-chemical and mechanical properties for enhanced in-vitro biocompatibility suitable for biomedical applications. Biomimetically prepared chitosan-sodium alginate scaffold containing TiO₂ nanoparticles (1 wt%) is found to exhibit superior biocompatibility for bone tissue engineering applications.

Preparation and properties of a highly dispersed nano-hydroxyapatite colloid used as a reinforcing filler for chitosan

Hydroxyapatite/chitosan (HAp/CS) composites have been widely studied and applied in tissue engineering fields due to their excellent biocompatibility and degradability. However, to improve the mechanical properties of CS, cross-linking agents are commonly added, which will seriously affect its biocompatibility and safety. In this study, the homogenously dispersed nano-hydroxyapatite (nHAp) colloidal solution was first synthesized using a co-precipitation method. The three-dimensional porous nano-hydroxyapatite/chitosan (nHAp/CS) composite scaffolds with different nHAp contents were then obtained through an environmentally friendly freeze-drying process without any cross-linking. The microstructure, porosity, phase composition, swelling ratio, mechanical properties, and biocompatibility of the nHAp/CS scaffolds were thoroughly investigated. The as-prepared nHAp/CS scaffolds exhibited a high porosity and excellent swelling performance. Compared with pure CS scaffolds, the nHAp/CS composite scaffolds not only showed higher compressive modulus but also exhibited better biocompatibility. This study provides a simple and environmentally friendly technique to construct three-dimensional porous nHAp/CS composite scaffolds, which demonstrate promising potential by being a scaffold material for bone tissue engineering.

Enhanced sciatic nerve regeneration by poly-L-lactic acid/multi-wall carbon nanotube neural guidance conduit containing Schwann cells and curcumin encapsulated chitosan nanoparticles in rat

The main aim of this study was to improve the efficacy of peripheral nerve regeneration by an artificial neural guidance conduit (NGC) as a carrier to transplant allogeneic Schwann cells (SCs) and curcumin encapsulated chitosan nanoparticles (nanocurcumin). The conduit was prepared by poly-L-lactic acid (PLLA) and surface-modified multi-wall carbon nanotubes (mMWCNT) and filled with SCs and nanocurcumin. SCs play an important role in the regeneration of injured peripheral nerve and controlled curcumin release can decrease SCs apoptosis, and enhance the regeneration and functional recovery of injured peripheral nerves. The mechanical properties, contact angle, and cell biocompatibility experiments showed that the optimized concentration of mMWCNT inside PLLA wall of conduits was 0.15 wt%. The drug release experiments showed slower release of curcumin from nanocurcumin samples compared to nanocurcumin encapsulated inside NGC wrapped fibrin gel sample. It was found that simultaneous using of both SCs and curcumin inside NGC had a significant role in sciatic nerve regeneration in vivo. Histological examination revealed a significant increase in the number of axons in injured sciatic nerve following treatment by SCs and nanocurcumin compared to negative control group. Histological evaluation also revealed a significant decrease in the number of vessels in fibrin groups compared to positive control group. The results showed that there was no significant difference between the reaction time and sciatic functional index (SFI) values of rats with injured sciatic nerve treated by NGC/SCs/nanocurcumin sample and autograft sample. In conclusion, our results strongly showed that PLLA/mMWCNT nanofibrous conduit filled with fibrin gel containing SCs and nanocurcumin is a proper strategy for improving nerve regeneration after a nerve transaction in the rat.

Gadolinium-doped mesoporous calcium silicate/chitosan scaffolds enhanced bone regeneration ability

Chitosan (CTS) and mesoporous calcium silicate (MCS) have been developed for bone defect healing; however, their bone regeneration capacity still does not satisfy the patients with bone diseases. Gadolinium (Gd) is accumulated in human bones, and plays a beneficial role in regulating cell performance and bone regeneration. We firstly constructed Gd-doped MCS/CTS (Gd-MCS/CTS) scaffolds by a lyophilization technology. The interconnected arrangement of CTS films lead to forming macropores by using ice crystals as templates during the lyophilization procedure, and the Gd-MCS nanoparticles dispersed uniformly on the macropore walls. The biocompatible chemical components and hierarchical pores facilitated the attachment and spreading of rat bone marrow-derived mesenchymal stem cells (rBMSCs). Interestingly, the Gd dopants in the scaffolds effectively activated the Wnt/β-catenin signaling pathway, resulting in excellent cell proliferation and osteogenic differentiation capacities. The osteogenic-related genes such as alkaline phosphatase (ALP), runt-related transcription factor 2 (Runx2) and collagen type1 (COL-1) were remarkably up-regulated by Gd-MCS scaffolds as compared with MCS scaffolds, and their expression levels increased in a positive correlation with Gd doping amounts. Moreover, in vivo rat cranial defect tests further confirmed that Gd-MCS/CTS scaffolds significantly stimulated collagen deposition and new bone formation. The exciting finding suggested the beneficial effects of Gd³⁺ ions on osteogenic differentiation and new bone regeneration, and Gd-MCS/CTS scaffolds can be employed as a novel platform for bone defect healing.

Super-hydrophilic and high strength polymeric foam dressings of modified chitosan blends for topical wound delivery of chloramphenicol

In the present study polymer blends based on chitosan (CS) and its derivatives with trans-aconitic (t-Acon) acid and another with trimellitic (TRM) anhydride, were prepared for topical wound delivery of chloramphenicol (CHL). FT-IR spectroscopy revealed the successful grafting of t-Acon acid or TRM anhydride into CS macromolecules at molar ratios 1:1 and 1:0.5, while powder X-ray diffraction (XRD) analysis showed that the prepared materials were amorphous. Neat chitosan and its grafted derivatives were mixed in different ratios (25/75, 50/50 and 75/25 w/w) in order to prepare suitable blends. Scanning electron microscopy (SEM) showed that the formed blends after freeze-drying had a sponge-like structure, while thermogravimetric analysis (TGA) verified their thermal stability. All blends are miscible in studied compositions and have extensive swelling and much better mechanical properties than neat CS. In a further step, the obtained porous sponges prepared from CS/CS-derivatives 50/50 w/w were loaded with Chloramphenicol (10, 20 and 30 wt%), a broad-spectrum antibiotic, and the prepared dressings were evaluated in terms of FT-IR, XRD, SEM, and in vitro drug dissolution. An initial burst release followed by a quasi-Fickian diffusion driven sustained release phase was observed while the addition of chloramphenicol gives high antimicrobial properties to all dressings.

In vitro and in vivo acute response towards injectable thermosensitive chitosan/TEMPO-oxidized cellulose nanofiber hydrogel

TEMPO-oxidized cellulose nanofiber (TOCNF) is a natural material with many promising properties, including biocompatibility and degradability. In this study, we integrated TOCNF at different concentrations (0.2, 0.4, 0.6, 0.8% w/v) with chitosan (CS) and created a thermosensitive injectable hydrogel intended for biomedical applications. These hydrogels can undergo sol-gel transition at body temperature through interactions between chitosan and β-glycerophosphate. The addition of TOCNF resulted in faster gelation time and increased porosity. These hydrogels with TOCNF showed improved biocompatibility both in vitro and in vivo compared to CS hydrogel. Both MC3T3-E1 pre-osteoblast cells and L929 fibroblast cells showed biocompatibility towards CS/TOCNF 0.4. After 7days of implantation, initial inflammatory response to CS/TOCNF 0.4 was found. Such response was significantly subsided within 14days. Cell infiltration within the hydrogel was also prominent, showing anti-inflammatory or wound healing (M2) macrophage at 14days after implantation. These results showed that the addition of TOCNF could significantly improve the biocompatibility of CS hydrogel as a biomaterial for biomedical application.

Preparation and Characterization of Films Extruded of Polyethylene/Chitosan Modified with Poly(lactic acid)

The use of mixtures of synthetic and natural polymers is a potential option to reduce the pollution by plastic waste. In this work, the method for the chemical modification of chitosan with poly(lactic acid) was developed; then, the preparation of films of blends of polyethylene and chitosan-poly(lactic acid) produced by an extrusion method using polyethylene-graft maleic anhydride as a compatibilizer. It was possible to obtain films with a maximum content of 20 wt% and 30 wt%, chitosan, with and without compatibilizer, respectively. Scanning electron microscope (SEM) analysis showed a homogeneous surface on all films. The addition of the compatibilizer had a significant effect on the mechanical properties of the films, such as an increase in Young’s modulus and a decrease in the elongation at break; additionally, the compatibilizer promotes thermal degradation in a single step and gives the film a slight increase in thermal resistance. These results are attributed to an improved interaction in the interface of polyethylene and chitosan-poly(lactic acid), promoted by the compatibilizer.

Glycerophosphate-based chitosan thermosensitive hydrogels and their biomedical applications

Chitosan is non-toxic, biocompatible and biodegradable polysaccharide composed of glucosamine and derived by deacetylation of chitin. Chitosan thermosensitive hydrogel has been developed to form a gel in situ, precluding the need for surgical implantation. In this review, the recent advances in chitosan thermosensitive hydrogels based on different glycerophosphate are summarized. The hydrogel is prepared with chitosan and β-glycerophosphate or αβ-glycerophosphate which is liquid at room temperature and transits into gel as temperature increases. The gelation mechanism may involve multiple interactions between chitosan, glycerophosphate, and water. The solution behavior, rheological and physicochemical properties, and gelation process of the hydrogel are affected not only by the molecule weight, deacetylation degree, and concentration of chitosan, but also by the kind and concentration of glycerophosphate. The properties and the three-dimensional networks of the hydrogel offer them wide applications in biomedical field including local drug delivery and tissue engineering.

Thermosensitive chitosan/glycerophosphate-based hydrogel and its derivatives in pharmaceutical and biomedical applications

INTRODUCTION

Thermogelling chitosan (CS)/glycerophosphate (GP) solutions have been reported as a new type of parenteral in situ forming depot system. These free-flowing solutions at ambient temperature turn into semi-solid hydrogels after parenteral administration.

AREAS COVERED

Formulation parameters such as CS physico-chemical characteristics, CS/gelling agent ratio or pH of the system, were acknowledged as key parameters affecting the solution stability, the sol/gel transition behavior and/or the final hydrogel structure. We discuss also the use of the standard CS/GP thermogels for various biomedical applications, including drug delivery and tissue engineering. Furthermore, this manuscript reviews the different strategies implemented to improve the hydrogel characteristics such as combination with carrier particles, replacement of GP, addition of a second polymer and chemical modification of CS.

EXPERT OPINION

The recent advances in the formulation of CS-based thermogelling systems already overcame several challenges faced by the standard CS/GP system. Dispersion of drug-loaded carrier particles into the thermogels allowed achieving prolonged release profiles for low molecular weight drugs; incorporation of an additional polymer enabled to strengthen the network, while the use of chemically modified CS led to enhanced pH sensitivity or biodegradability of the matrix.