A novel porous nanocomposite of aminated silica MCM-41 and nylon-6: Isotherm, kinetic, and thermodynamic studies on adsorption of Cu(II) and Cd(II)

Preparation of highly adsorptive biochar by sequential iron impregnation under refluxing and pyrolysis at low temperature for removal of tetracycline

Iron-doping modification is a prevailing approach for improving adsorption capability of biochar with environmental friendliness, but usually requires high temperature and suffers from iron aggregation. Herein, a highly adsorptive biochar was manufactured via sequential disperse impregnation of iron by refluxing and pyrolysis at low temperature for eliminating tetracycline (TC) from aqueous solution. Iron oxides and hydroxides were impregnated and stably dispersed on the carbon matrix as pyrolyzed at 200 °C, meanwhile abundant oxygen and nitrogen functional groups were generated on surface. The iron-doped biochar exhibited up to 891.37 mg/g adsorption capacity at pH 5, and could be recycled with high adsorption capability. The adsorption of TC should be mostly contributed to the hydrogen bonding of N/O functional groups and the hydrogen bonding/coordination of iron oxides/hydroxides. This would provide a valuable guide for dispersedly doping iron and conserving functional groups on biochar, and a super iron-doped biochar was prepared with superior recyclability.

Foliar application of glycine-functionalized nanopesticides for effective prevention and control of root-knot nematodes via a targeted delivery strategy

BACKGROUND

Root-knot nematodes (RKNs) are the highly damaging pests for various crops, and the prevalence of RKNs has posed serious threats to worldwide agricultural harvest, severely affecting global food security and ecosystem health. Traditional pesticide systems on controlling RKNs generally cause environmental hazards and phytotoxicity due to the excessive use of pesticides resulted from low utilization efficiency. And effective approaches with biosafe and efficient features are highly demanded to break away from the dilemma caused by RKNs.

RESULTS

In this research, a nanopesticide system with root-targeted delivery function was developed to achieve effective prevention and control of RKNs. The nanocarriers (MSN-KH560-Gly) and the obtained nanopesticides (EB@MSN-KH560-Gly) were proved to be biosafe. Also, this nanopesticide system demonstrated sustained release behavior. The grafting of glycine (Gly) significantly improved the pesticide contents translocating to cucumber roots (about 304.7%). Besides, such root-targeted delivery function resulted in no root nodule in cucumber plants after the foliar application of these nanopesticides (prevention rate of 100%). In addition, the root nodule numbers of the infected cucumber plants decreased by 71.67%.

CONCLUSION

Foliar application of these Gly-functionalized nanopesticides achieved effective prevention and control of RKNs due to the root-targeted delivery property inherent in this nanopesticide system, and such root-targeted delivery strategy opens a novel and efficient method to protect crops from RKN invasion and thus facilitates the development of sustainable agriculture. © 2023 Society of Chemical Industry.

Functional Ag-EDTA-modified MnO2 nanocoral reef for rapid removal of hazardous copper from wastewater

A novel MnO2@EDTA-Ag nanocoral reef was constructed via a simplified redox reaction followed by EDTA and Ag nanoparticles impregnation to capture hazardous copper (II) from wastewater. A comprehensive characterization of the synthesized materials was conducted. The morphology of MnO2@EDTA-Ag in the form of a nanocoral reef was constructed of two-dimensional nanoplatelets and nanorod-like nanostructures. The optimal adsorption conditions proposed by the Plackett-Burman design (PBD) that would provide a removal % of 99.95 were pH 5.5, a contact time of 32.0 min, a Cu(II) concentration of 11.2 mg L-1, an adsorbent dose of 0.05 g, and a temperature of 40.3 °C. The loading of Ag nanoparticles onto MnO2@EDTA improved the adsorption capability of MnO2@EDTA-Ag. Additionally, the recyclability of MnO2@EDTA-Ag nanocoral reef was maintained at 80% after three adsorption-desorption cycles, and there was no significant change in the XRD analysis before and after the recycling process, implying its stability. It was found that nanocoral reef-assisted EDTA formed a chelation/complexation reaction between COO- groups and C-N bonds of EDTA with Cu(II) ions. In addition, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis proved the synergistic effect of the electrostatic interaction and chelation/complexation was responsible for the removal mechanism of Cu(II). Also, the results demonstrated no significant variation in MnO2@EDTA-Ag removal efficiency for all the tested real water samples, revealing its efficacy in wastewater treatment. Therefore, the current study suggests that MnO2@EDTA-Ag has substantial potential to be used as a feasible adsorbent for probable hazardous metals remediation.

Preparation of Salicylic Acid-Functionalized Nanopesticides and Their Applications in Enhancing Salt Stress Resistance

Soil salinization is one of the global ecological and environmental problems that are tremendously threatening to the sustainable development of agriculture and food supply. In this work, a facile strategy was proposed to enhance the salt stress resistance of plants by preparing salicylic acid (SA)-functionalized mesoporous silica nanocarriers loaded with emamectin benzoate (EB). The obtained nanopesticides demonstrated a particle size of less than 300 nm. As an endogenous plant hormone, the grafting of SA in this nanopesticide system improved the uptake and translocation of pesticides in cucumber plants by 145.06%, and the applications of such nanopesticides enhanced the salt stress resistance of plants. This phenomenon was accounted for by the SA-functionalized nanopesticides increasing the superoxide dismutase and peroxidase activities (640 and 175%, respectively) and reducing the malondialdehyde content (54.10%), correspondingly alleviating the accumulation of reactive oxygen species and cell damage in plants. The above results were also confirmed by Evans blue staining and NBT staining experiments on cucumber leaves. In addition, these nanopesticides exhibited high insecticidal toxicity, and they also demonstrated biosafety toward nontarget organisms due to their sustained release property. Therefore, this work developed a biosafe SA-functionalized nanopesticide system, and these newly developed nanopesticides have potential in the agricultural field for enhancing salt stress resistance of plants.

Mesoporous Ag-functionalized magnetic activated carbon-based agro-waste for efficient removal of Pb(II), Cd(II), and microorganisms from wastewater

Herein, eco-friendly mesoporous magnetic activated carbon-based agro-waste nanosorbents incorporating antimicrobial silver nanoparticles (Mag@AC1-Ag and Mag@AC1-Ag) have been prepared. Various techniques (XRD, SEM/EDX, TEM, FTIR, and BET analysis) were employed to characterize the prepared nanosorbents before being utilized as novel nanosorbents to remove Pb+2 and Cd+2 ions. Mag@AC1-Ag and Mag@AC1-Ag exhibited rapid and excellent uptake of Pb+2 and Cd+2. The pseudo-second-order kinetics and the Langmuir isotherm are more suitable for the explanation of the experimental results. The thermodynamic parameters showed that the Pb+2 and Cd+2 sorption by the nanosorbents was a spontaneous and endothermic reaction. The prepared nanosorbents can be effectively regenerated using HCl and recycled up to the fifth cycle. These nanosorbents' potential uses for eliminating Pb+2 and Cd+2 from real water samples were evaluated. Moreover, the results revealed that both Mag@AC1-Ag and Mag@AC2-Ag exhibited high antimicrobial activity against fecal coliform (gram-negative) and Bacillus subtilis (gram-positive).

Ag/LDH-itaconic acid-gellan gam nanocomposites: Facile and green synthesis, characterization, and excellent catalytic reduction of 4-nitrophenol

The catalytic reduction reaction is one of the most commonly used solutions to convert high-risk contaminants into safe or low-risk materials. Today, with the increasing water pollution, the urgent need for efficient and effective catalysts is felt more than ever. For this purpose, for the first time, a green catalyst composed of silver nanoparticles anchored on itaconic acid-modified Ca-Al layered double hydroxide/gellan gum nanocomposite (Ag/LDH-ITA-GG NC) was prepared from a green approach without the use of any toxic organic solvents. To gain an in-depth insight into the physicochemical properties of the catalyst, different techniques including nitrogen adsorption-desorption isotherms, FESEM/mapping, FTIR, TGA, and XRD were used. The catalytic performance of the Ag/LDH-ITA-GG NC toward 4-nitrophenol reduction by NaBH₄ was investigated. The calculated values of the apparent rate constant for this reaction are 0.2142 min^-1 (for 1.0 mg of the catalyst), 0.2375 min^-1 (for 3.0 mg of the catalyst), and 0.2550 min^-1 (for 5.0 mg of the catalyst), indicating that the catalytic conversion of 4-nitrophenol to 4-aminophenol on the Ag/LDH-ITA-GG NC catalyst follows the pseudo-first-order kinetics and is comparable to the previous findings in the literature. The results of this study indicated that Ag/LDH-ITA-GG NC can potentially be utilized as an auspicious high efficient green catalyst for the reduction of pollutants like 4-nitrophenol.

Study on novel modified large mesoporous silica FDU-12/polymer matrix nanocomposites for adsorption of Pb(II)

In this study, porous methacrylate-modified FDU-12/poly(methyl methacrylate) and amine-modified FDU-12/Nylon 6 nanocomposites were synthesized via a facile solution casting protocol. The physicochemical properties of the prepared materials were studied using various characterization techniques including Fourier transform-infrared spectroscopy, field emission-scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption/desorption. After characterization of the materials, the prepared nanocomposites were applied as novel adsorbents for the removal of Pb(II) from aqueous media. In this regard, the effect of various parameters including solution pH, adsorbent amount, contact time, and initial concentration of Pb(II) on the adsorption process was investigated. To study the mechanism of adsorption, kinetic studies were conducted. The kinetic models of pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion were employed. The results revealed that the adsorption of Pb(II) onto methacrylate-modified FDU-12/poly(methyl methacrylate) and amine-modified FDU-12/Nylon 6 adsorbents followed the pseudo-second-order kinetic model. Also, different isotherms including Langmuir, Freundlich, and Dubinin-Radushkevich were applied to evaluate the equilibrium adsorption data. Langmuir isotherm provided the best fit with the equilibrium data of both adsorbents with maximum adsorption capacities of 99.0 and 94.3 mg g-1 for methacrylate-modified FDU-12/poly(methyl methacrylate) and amine-modified FDU-12/Nylon 6, respectively, for the removal of Pb(II).

Enhanced and Selective Adsorption of Zn(II), Pb(II), Cd(II), and Hg(II) Ions by a Dumbbell- and Flower-Shaped Potato Starch Phosphate Polymer: A Combined Experimental and DFT Calculation Study

Microwave-ultrasound-assisted facile synthesis of a dumbbell- and flower-shaped potato starch phosphate (PSP) polymer, hereafter PSP, was carried out by cross-linking the hydroxyl groups of native potato starch (NPS) using phosphoryl chloride as a cross-linking agent. Structural and morphological analysis manifested the successful formation of the dumbbell- and flower-shaped PSP biosorbent with enhanced specific surface area and thermal stability. Viscoelastic behavior of NPS and PSP suggested increased rigidity in PSP, which helped the material to store more deformation energy in an elastic manner. The synthesized PSP biosorbent material was successfully tested for efficient and quick uptake of Zn(II), Pb(II), Cd(II), and Hg(II) ions from aqueous medium under competitive and noncompetitive batch conditions with q m values of 130.54, 106.25, 91.84, and 51.38 mg g-1, respectively. The adsorption selectivity was in consonance with Pearson's hard and soft acids and bases (HSAB) theory in addition to their order of hydrated radius. Adsorption of Zn(II), Pb(II), Cd(II), and Hg(II) followed a second-order kinetics and the adsorption data fitted well with the Langmuir isotherm model. Quantum computations using density functional theory (DFT) further supported the experimental adsorption selectivity, Zn(II) > Pb(II) > Cd(II) > Hg(II), in terms of metal-oxygen binding energy measurements. What was more intriguing about PSP was its reusability over multiple adsorption cycles by treating the metal(II)-complexed PSP with 0.1 M HCl without any appreciable loss of its adsorption capacity.

Effective removal of Cd(II) from aqueous solution based on multifunctional nanoporous silicon derived from solar kerf loss waste

Recycling of kerf-loss slurry waste has become a meaningful and urgent issue in recent years. In this study, a novel hybrid material was prepared by Ag-assisted chemical etching kerf loss silicon waste and subsequently functionalized by a facile three-step graft process of 3-aminopropyltrimethoxy-silane, maleic anhydride, and ethylenediamine, named as EDA-MAH-APTES-NPSi, which could work as an effective adsorbent for removal of Cd(Ⅱ) from aqueous solution. The effect of initial pH, absorption duration, and metal ion concentrations on absorption performance were investigated. The adsorption equilibrium achieved after 120 min, the maximum adsorption capacity reached up to 210.01 mg/g and pH was at 5.5. The adsorption kinetic was fitted in the pseudo-second-order model and the Freundlich equation provided an accurate description for adsorption behavior. The XPS and FT-IR analysis manifested that Cd(Ⅱ) removal might be ascribed to the adsorption on the surface organic functional group by chemical chelating reaction and the ion exchange reaction. The EDA-MAH-APTES-NPSi maintained excellent adsorption capacity which decreased approximately 15.3 % (from 40.5-34.3 mg/g) after five successive regenerated cycles. The work confirms the potential of Cd(Ⅱ) removal from aqueous solution based on the modified NPSi and opens up a new way for recycling silicon cutting waste.

Influence of Selective Conditions on Various Composite Sorbents for Enhanced Removal of Copper (II) Ions from Aqueous Environments

Numerous pollutants, including dyes, heavy metals, pesticides, and microorganisms, are found in wastewater and have great consequences when discharged onto natural freshwater sources. Heavy metals are predominantly reported in wastewater. Heavy metals are persistent, non-biodegradable and toxic, transforming from a less toxic form to more toxic forms in environmental media under favourable conditions. Among heavy metals, copper is dominantly found in wastewater effluent. In this review, the effects of high concentration of copper in plants and living tissues of both aquatic animals and humans are identified. The performance of different polymer adsorbents and the established optimum conditions to assess the resultant remediation effect as well as the amount of copper removed are presented. This procedure allows the establishment of a valid conclusion of reduced time and improved Cu (II) ion removal in association with recent nano-polymer adsorbents. Nano-polymer composites are therefore seen as good candidates for remediation of Cu ions while pH range 5-6 and room temperature were mostly reported for optimum performance. The optimum conditions reported can be applied for other metal remediation and development of potent novel adsorbents and process conditions.

Preparation of polyvinyl alcohol graphene oxide phosphonate film and research of thermal stability and mechanical properties

In this article, flake graphite, nitric acid, peroxyacetic acid and phosphoric acid are used to prepare graphene oxide phosphonic and phosphinic acids (GOPAs), and GOPAs and polyvinyl alcohol (PVA) are used to synthesize polyvinyl alcohol graphene oxide phosphonate and phosphinate (PVAGOPs) in the case of faint acidity and ultrasound irradiation, and PVAGOPs are used to fabricate PVAGOPs film, and the structure and morphology of GOPAs, PVAGOPs and PVAGOPs film are characterized, and the thermal stability and mechanical properties of PVAGOPs film are investigated. Based on these, it has been proved that GOPAs consist of graphene oxide phosphonic acid and graphene oxide phosphinic acid, and there are CP covalent bonds between them, and PVAGOPs are composed of GOPAs and PVA, and there are six-member lactone rings between GOPAs and PVA, and the thermal stability and mechanical properties of PVAGOPs film are improved effectively.

Synthesis of mesoporous silica-calcium phosphate hybrid nanoparticles and their potential as efficient adsorbent for cadmium ions removal from aqueous solution

Since adsorption and nanomaterials had been respectively found to be the most promising technique and the preferred adsorbents for heavy metal ions removal, in this study, novel mesoporous silica-calcium phosphate (MS-CP) hybrid nanoparticles were synthesized by a facile one-pot method, and subsequently assessed as adsorbent for Cd²⁺ removal from aqueous solution. MS-CP were characterized by scanning and transmission electron microscopies, etc. The influences of initial Cd²⁺ concentration, contact time, solution temperature and solution pH on removal efficiency of Cd²⁺ were investigated in detail. The results revealed that MS-CP were nanospheres of ∼20 nm and presented a bimodal pore distribution (3.82 nm and 12.40 nm), a high surface area (314.56 m²/g) and a large pore volume (1.21 cm³/g). The Cd²⁺ removal experiments demonstrated that MS-CP had a high adsorption capacity due to electrostatic interaction between Cd²⁺ and silanol groups on MS-CP surface, as well as ion-exchange between Cd²⁺ and calcium in MS-CP. Additionally, removal efficiency of Cd²⁺ increased with increasing contact time and solution temperature, while decreased as initial Cd²⁺ concentration increased. The maximum adsorption capacity of Cd²⁺ by MS-CP was above 153 mg/L. These results suggested that the as-synthesized MS-CP could be promising adsorbent for Cd²⁺ removal from aqueous solution.

Ultra-fast and highly efficient removal of cadmium ions by magnetic layered double hydroxide/guargum bionanocomposites

Finding effective methodologies for the removal of heavy metals from contaminated water are really significant. Facile and "green" techniques for adsorbents fabrication are in high demand to satisfy a wide range of practical applications. This report presents of an efficient method for preparing Fe₃O₄@ layered double hydroxide@ guargum bionanocomposites (GLF-BNCs). First of all, the LDH coated Fe₃O₄ nanoparticles were simply synthesized, using ultrasonic irradiation. The citrate coated Fe₃O₄ nanoparticles which were under negative charging and LDH nanocrystals which were charged positively make electrostatic interaction which formed a stable self-assembly component, and then guargum as a biopolymer were linked onto Fe₃O₄@LDH via an in situ growth method. Furthermore, the GLF-BNCs had the ability to remove cadmium ions (Cd²⁺) from the aqueous solutions. Adsorption studies indicate that the Langmuir isotherm model and the kinetic model in pseudo-second order were appropriate for Cd(II) removal. The maximum Cd(II) adsorption capacity of the GLF8% was 258 mg g^-1. The Cd(II) was adsorbed from aqueous solutions very quickly with the contact time of 5 min by the GLF 8%, suggesting that GLF-BNCs may be a promising adsorbent for removing Cd(II) from wastewater. The effect of Fe₃O₄@LDH contents (2, 4 and 8 wt.%) on the thermal, physicomechanical, and morphological properties of guargum were investigated by Fourier transform infrared spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), field emission scanning electron microscopy, transmission electron microscopy (TEM), Energy-dispersive X-ray spectroscopy and Brunauer-Emmett-Teller (BET) specific surface area techniques. The TEM results indicated that the LDH platelets are distributed within the polymer matrix.

Ultrasonic-assisted synthesis of novel nanocomposite of poly(vinyl alcohol) and amino-modified MCM-41: A green adsorbent for Cd(II) removal

Amino-modified MCM-41/poly(vinyl alcohol) nanocomposite (M-MCM-41/PVOH NC) was developed for the adsorption of Cd(II) from aqueous media. M-MCM-41/PVOH NC was prepared through ultrasonic-assisted and simple blending procedure with economical and environmentally friendly polymer. The as-prepared adsorbent was characterized by FT-IR, TEM, FE-SEM and TGA. The contact time, solution pH and initial concentration of Cd(II) were found to affect the adsorption of Cd(II) from aqueous media. Kinetic studies were carried out and pseudo-first-order (PFO), pseudo-second-order (PSO), Elovich, and intra-particle diffusion (IPD) reaction kinetic models were examined. The kinetic results revealed that the adsorption of Cd(II) onto M-MCM-41/PVOH NC followed PSO kinetic model and is a chemical adsorption. The equilibrium adsorption data were evaluated by different isotherms viz. Langmuir, Freundlich, and Dubinin Radushkevich (D-R) equations. The equilibrium data fitted better with the Langmuir isotherm and the maximum adsorption capacity of M-MCM-41/PVOH NC at 298K was calculated to be 46.73mgg^-1 for Cd(II) on a typical saturated monomolecular layer with a fixed number of localized adsorption sites.

Environmentally-friendly and ultrasonic-assisted preparation of two-dimensional ultrathin Ni/Co-NO3 layered double hydroxide nanosheet for micro solid-phase extraction of phenolic acids from fruit juices

In this paper, we report an environmentally-friendly and low cost synthetic approach for large-scale fabrication of 2-dimentional porous Ni/Co-NO₃-based layered double hydroxide (Ni/Co-NO₃-LDH) nanosheet through ultrasonic-assisted process. The synthesis procedure used ethylene glycol/water system as an eco-friendly solvent system. The synthesized LDH was characterized by FE-SEM, TEM, XRD, and FT-IR techniques. FE-SEM and TEM images showed porous structure surface morphology of the synthesized LDH. Also, For Ni/Co-NO₃-LDH, a hexagonal ultrathin layered was obtained owing to ultrasonic irradiation and applied processing conditions. The prepared LDH was used as sorbent in dispersive micro solid-phase extraction procedure. Two phenolic acids including p-hydroxybenzoic acid and p-coumaric acid were selected as model compounds. Some experimental factors affecting the extraction efficiency of the analytes were investigated and optimized. Finally, the sorbent was used for the extraction of model compound from fruit juice samples followed by high performance liquid chromatography. Linear dynamic range of 0.5-500µgL^-1 with a low detection limit (0.1µgL^-1) was obtained by the method. The relative standard deviations were 2.5 and 4.3% for p-hydroxybenzoic acid and p-coumaric acid, respectively. All recoveries were between 82 and 92%.