Current nanocomposite advances for biomedical and environmental application diversity

Nanocomposite materials are emerging as key players in addressing critical challenges in healthcare, energy storage, and environmental remediation. These innovative systems hold great promise in engineering effective solutions for complex problems. Nanocomposites have demonstrated various advantages such as simplicity, versatility, lightweight, and potential cost-effectiveness. By reinforcing synthetic and natural polymers with nanomaterials, a range of nanocomposites have exhibited unique physicochemical properties, biocompatibility, and biodegradability. Current research on nanocomposites has demonstrated promising clinical and translational applications. Over the past decade, the production of nanocomposites has emerged as a critical nano-structuring methodology due to their adaptability and controllable surface structure. This comprehensive review article systematically addresses two principal domains. A comprehensive survey of metallic and nonmetallic nanomaterials (nanofillers), elucidating their efficacy as reinforcing agents in polymeric matrices. Emphasis is placed on the methodical design and engineering principles governing the development of functional nanocomposites. Additionally, the review provides an exhaustive examination of recent noteworthy advancements in industrial, environmental, biomedical, and clinical applications within the realms of nanocomposite materials. Finally, the review concludes by highlighting the ongoing challenges facing nanocomposites in a wide range of applications.

Zinc oxide nanoparticles loaded with linalool as a potential control agent of malaria infection

This research aimed to produce and analyze zinc oxide nanoparticles (ZNPs) loaded with linalool (LZNPs), and to evaluate their in vitro and in vivo efficacy through targeting the inflammation and oxidative stress. LZNPs were synthesized using an ethanolic solution of polyvinyl alcohol. The Malstat technique was used to evaluate the effectiveness of LZNPs against both sensitive and resistant strains of Plasmosium falciparum. In vivo effects of ZNPs and LZNPs on parasite growth suppression, survival rate, oxidative stress markers, antioxidant genes, and gene and protein levels of inflammatory cytokines were evaluated by Real-time PCR and Western blot techniques. The results indicated that LZNPs demonstrated noteworthy (P < 0.001) antiplasmodial activity against both susceptible and resistant strains of P. falciparum. P. berghei NK65 strain-infected mice treated with the ZNPs and LZNPs at doses of 5-15 mg/kg notably (p < 0.001) increased the survival rates and parasite growth suppression. LZNPs at 5-15 mg/kg demonstrated a significant (p < 0.001) decrease in oxidative stress markers, increased the expression level of antioxidant genes, and reduced the gene and protein expression level of inflammatory cytokines. The current experimental study demonstrated the potent in vitro antiplasmodial activity of LZNPs against chloroquine-resistant and sensitive strains of P. falciparum compared to ZNPs alone. Additionally, the study identified the potential benefits of this nanocomposite in suppressing the parasite and extending the survival rate in mice infected with P. berghei by targeting inflammation and oxidative stress. It also showed minimal toxicity in liver and kidney function in healthy mice. Nevertheless, further research is essential to elucidate the comprehensive mechanisms and practical effectiveness of LZNPs.

Linalool-zinc oxide nanocomposite controls Toxoplasma gondii infection through inhibiting inflammation, oxidative stress, and pathogenicity

The present in vitro and in vivo study aimed to fabricate and characterize linalool-zinc oxide nanoparticles (Lin-ZNP) and evaluate their effectiveness against Toxoplasma gondii infection in terms of inflammation, oxidative stress, and pathogenicity. Lin-ZNP was synthesized using an ethanolic solution of polyvinyl alcohol. The anti-Toxoplasma and cytotoxicity activities of Lin-ZNP were investigated, along with its effects on nitric oxide (NO) production, caspase-3 activity, and pro-inflammatory genes. After treating T. gondii-infected mice with Lin-ZNP for 14 days, the number and size of tissue cysts, antioxidant potential, pro-inflammatory cytokines, and T. gondii pathogenicity-related genes were evaluated by real-time polymerase chain reaction and Western blot analysis. The Lin-ZNP composite showed a reduced tendency with an average size of 105 nm. Lin-ZNP significantly reduced the viability of tachyzoites. The obtained selectivity index higher than 10, indicating high specificity for parasites with low cytotoxicity to normal cells. The Lin-ZNP significantly (p < 0.05) increased the production of NO, caspase-3 activity, and the expression levels of pro-inflammatory genes. Lin-ZNP significantly (p < 0.001) decreased the size and number of tissue cysts and caused a significant reduction in the level of malondialdehyde and a considerable increase (p < 0.001) in antioxidant enzymes and their expression genes. Lin-ZNP significantly downregulated both mRNA and protein expression of the inflammation-related markers associated with the TLRs/NF-κB pathway. The expression levels of the T. gondii pathogenicity-related genes were significantly downregulated (p < 0.05). The recent survey indicated that Lin-ZNP manages T. gondii infection by its antioxidant activity and inhibiting the TLRs/NF-κB pathway without toxicity in mice.

Sonochemical synthesis of bioinspired graphene oxide-zinc oxide hydrogel for antibacterial painting on biodegradable polylactide film

Graphene oxide nanosheet (GO) is a multifunctional platform for binding with nanoparticles and stacking with two dimensional substrates. In this study, GO nanosheets were sonochemically decorated with zinc oxide nanoparticles (ZnO) and self-assembled into a hydrogel of GO-ZnO nanocomposite. The GO-ZnO hydrogel structure is a bioinspired approach for preserving graphene-based nanosheets from van der Waals stacking. X-ray diffraction analysis (XRD) showed that the sonochemical synthesis led to the formation of ZnO crystals on GO platforms. High water content (97.2%) of GO-ZnO hydrogel provided good property of ultrasonic dispersibility in water. Ultraviolet-visible spectroscopic analysis (UV-vis) revealed that optical band gap energy of ZnO nanoparticles (∼3.2 eV) GO-ZnO nanosheets (∼2.83 eV). Agar well diffusion tests presented effective antibacterial activities of GO-ZnO hydrogel against gram-negative bacteria (E. coli) and gram-positive bacteria (S. aureus). Especially, GO-ZnO hydrogel was directly used for brush painting on biodegradable polylactide (PLA) thin films. Graphene-based nanosheets with large surface area are key to van der Waals stacking and adhesion of GO-ZnO coating to the PLA substrate. The GO-ZnO/PLA films were characterized using photography, light transmittance spectroscopy, coating stability, scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopic mapping (EDS), antibacterial test and mechanical tensile measurement. Specifically, GO-ZnO coating on PLA substrate exhibited stability in aqueous food simulants for packaging application. GO-ZnO coating inhibited the infectious growth ofE. colibiofilm. GO-ZnO/PLA films had strong tensile strength and elastic modulus. As a result, the investigation of antibacterial GO-ZnO hydrogel and GO-ZnO coating on PLA film is fundamental for sustainable development of packaging and biomedical applications.

Unveiling of the antileishmanial activities of Linalool loaded zinc oxide nanocomposite through its potent antioxidant and immunomodulatory effects

This study aimed to produce linalool loaded zinc oxide nanocomposite (LZNPs) and assess its in vitro and in vivo antileishmanial effects against Leishmania major. LZNPs was produced through the synthesis of an ethanolic solution containing polyvinyl alcohol. The average size of LZNPs was determined to be 105 nm. The findings indicated that LZNPs displayed significant (p < 0.01) antileishmanial effects on promastigotes and amastigotes. Following exposure of promastigotes to LZNPs, there was a notable rise in the percentage of early and late apoptotic cells from 9.0 to 57.2 %. The gene expression levels of iNOS, IFN-γ, and TNF-α in macrophages were upregulated in a dose-dependent approach following exposure to LZNPs. LZNPs alone and in conjunction with glucantime (Glu) resulted in a reduction in the diameter and parasite load of CL lesions in infected mice. Treatment of the CL-infected mice with LZNPs at 25 and 50 mg/kg mainly in combination with Glu-reduced the tissue level of malondialdehyde (MDA), increased both gene and protein expression of the antioxidant enzymes as well as raised the expression level of IFN-γ and IL-12 cytokines, whereas caused a significant reduction in the expression level of IL-4. The present study shows that LZNPs has potent antileishmanial effects and controls CL in a mice model through its antioxidant and immunomodulatory properties. Further investigation, especially in clinical trials, could explore the potential use of this nanocomposite in managing and treating CL.

Pioneering a paradigm shift in tissue engineering and regeneration with polysaccharides and proteins-based scaffolds: A comprehensive review

In the realm of modern medicine, tissue engineering and regeneration stands as a beacon of hope, offering the promise of restoring form and function to damaged or diseased organs and tissues. Central to this revolutionary field are biological macromolecules-nature's own blueprints for regeneration. The growing interest in bio-derived macromolecules and their composites is driven by their environmentally friendly qualities, renewable nature, minimal carbon footprint, and widespread availability in our ecosystem. Capitalizing on these unique attributes, specific composites can be tailored and enhanced for potential utilization in the realm of tissue engineering (TE). This review predominantly concentrates on the present research trends involving TE scaffolds constructed from polysaccharides, proteins and glycosaminoglycans. It provides an overview of the prerequisites, production methods, and TE applications associated with a range of biological macromolecules. Furthermore, it tackles the challenges and opportunities arising from the adoption of these biomaterials in the field of TE. This review also presents a novel perspective on the development of functional biomaterials with broad applicability across various biomedical applications.

Chitosan nanocomposite for tissue engineering and regenerative medicine: A review

Regenerative medicine and tissue engineering have emerged as a multidisciplinary promising field in the quest to address the limitations of traditional medical approaches. One of the key aspects of these fields is the development of such types of biomaterials that can mimic the extracellular matrix and provide a conducive environment for tissue regeneration. In this regard, chitosan has played a vital role which is a naturally derived linear bi-poly-aminosaccharide, and has gained significant attention due to its biocompatibility and unique properties. Chitosan possesses many unique physicochemical properties, making it a significant polysaccharide for different applications such as agriculture, nutraceutical, biomedical, food, nutraceutical, packaging, etc. as well as significant material for developing next-generation hydrogel and bio-scaffolds for regenerative medicinal applications. Moreover, chitosan can be easily modified to incorporate desirable properties, such as improved mechanical strength, enhanced biodegradability, and controlled release of bioactive molecules. Blending chitosan with other polymers or incorporating nanoparticles into its matrix further expands its potential in tissue engineering applications. This review summarizes the most recent studies of the last 10 years based on chitosan, blends, and nanocomposites and their application in bone tissue engineering, hard tissue engineering, dental implants, dental tissue engineering, dental fillers, and cartilage tissue engineering.

Antibacterial Gelatin Composite Hydrogels Comprised of In Situ Formed Zinc Oxide Nanoparticles

We report the feasibility of using gelatin hydrogel networks as the host for the in situ, environmentally friendly formation of well-dispersed zinc oxide nanoparticles (ZnONPs) and the evaluation of the antibacterial activity of the as-prepared composite hydrogels. The resulting composite hydrogels displayed remarkable biocompatibility and antibacterial activity as compared to those in previous studies, primarily attributed to the uniform distribution of the ZnONPs with sizes smaller than 15 nm within the hydrogel network. In addition, the composite hydrogels exhibited better thermal stability and mechanical properties as well as lower swelling ratios compared to the unloaded counterpart, which could be attributed to the non-covalent interactions between the in situ formed ZnONPs and polypeptide chains. The presence of ZnONPs contributed to the disruption of bacterial cell membranes, the alteration of DNA molecules, and the subsequent release of reactive oxygen species within the bacterial cells. This chain of events culminated in bacterial cell lysis and DNA fragmentation. This research underscores the potential benefits of incorporating antibacterial agents into hydrogels and highlights the significance of preparing antimicrobial agents within gel networks.

Conductive nerve conduit with piezoelectric properties for enhanced PC12 differentiation

Restoration of nerve tissue remains highly challenging, mainly due to the limited regeneration capacity of the nervous system and the development of fibrosis. This limitation necessitates designing new nerve guidance channel to promote nerve repairing. In this study, we developed a novel core/shell conduit to induce PC12 differentiation. Co-electrospinning method was utilized to produce a fibrous shell containing polycaprolactone/polyvinylidene fluoride PCL/PVDF, gelatin and polyaniline/graphene (PAG) nanocomposite. The core section of the conduit was filled with chitosan-gelatin hydrogel containing PAG and ZnO nanoparticles. Such conduit shows antibacterial activity, electrical conductivity and piezoelectric property. The effect of such engineered conduit on PC12 differentiation was investigated by analyzing differentiation markers Nestin and microtubule-associated protein 2 (MAP2) through immunocytochemistry and PCR-RT techniques. The result revealed that such conduit could significantly induce Nestin and MAP2 gene expression in the PC12 cells and, thus, it is a viable option for effective cell differentiation and nerve regeneration.

Evaluation of Photocatalytic, Antioxidant, and Antibacterial Efficacy of Almond Oil Capped Zinc Oxide Nanoparticles

In this study, ZnO nanoparticles (NPs) were synthesized in the presence of almond oil at various molar ratios of zinc acetate and sodium hydroxide, including 0.5:1, 0.75:1, 1:1, 1.25:1, and 1.5:1, to obtain pH values of 11, 10, 9, 8, and 7, respectively. The XRD results revealed that ZnO NPs exhibit a hexagonal structure, with high crystallinity. SEM results showed that dense and large sized ZnO NPs were formed at pH 11, and relatively small (~30-40 nm) NPs were obtained at pH 9. The size distribution can be explained in terms of the presence of OH- ions at different pH levels. However, the larger size of the NPs at pH 7 compared to those at pH 8-11 were due to the coalescence of NPs suitable for antioxidant/antibacterial activities. ZnO NPs demonstrated a high degradation efficiency (~93%) in 90 min, with a high rate constant for Methyl Orange (MO), which is better than the previously reported rate. The larger sized almond oil capped ZnO NPs also showed excellent radical scavenging activity (94%) and are proven to be good carriers to resist Escherichia coli (E. coli) bacteria.

Chitosan-g-polyacrylonitrile ZnO nano-composite, synthesis and characterization as new and good adsorbent for Iron from groundwater

The highly poisonous, non-biodegradable heavy metals present serious concern in wastewater environmental sustainability and human health. Using adsorption is an effective technology for the treatment of this kind of water. Therefore, developing efficient and cost-effective adsorbents considers a significant and an emerging topic in the field the water purification. Chitosan grafted polyacrylonitrile (Cs-g-PAN) was facially fabricated via graft polymerization using ammonium persulfate (APS) as the initiator. The simple ultrasonic technique was used for doping ZnO nanoparticles into the Cs-g-PAN matrix to prepare chitosan-grafted polyacrylonitrile/ZnO (Cs-g-PAN/ZnO). For comparative study, pure ZnO and nanocomposite of PAN doped with ZnO (PAN/ZnO) were also prepared. XRD, FTIR, SEM, TEM, BET, EDS, and TGA measurements were conducted to confirm the morphological and structural properties of the prepared materials. Cs-g-PAN/ZnO possesses a specific surface area of 20.23 m²/g with a pore size of 31.58 nm and pore volume of 0.16 cm³ g^-1. The adsorption behavior toward Fe(II) as a pollutant for groundwater was studied for the synthesized materials. The effect of pH (4-8), contact time (5-60 min), adsorbent dose (0.01-0.3 g), and different temperature degrees (278, 288, 298, 308, and 318 K) on the removal of iron (II) has been conducted. The removal efficiency was achieved 100 % under the optimum condition, at pH = 7, contact time 30 min, adsorbate concentration 0.93 mg/L, and adsorbent dosage 0.05 g/L at room temperature. Langmuir and Freundlich's isothermal and kinetic studies have been analyzed to determine the adsorption mechanism of Fe(II) ions on the synthesized nanomaterials. The adsorption process of Fe(II) over the surface of prepared catalysts proceeded via the Langmuir model and pseudo-second-order reaction kinetics with R² > 0.99. Suggesting the formation of Fe(II) monolayer over the adsorbent surface and the rate-limiting step is probably controlled by chemisorption through sharing the electrons between Fe⁺² and the prepared catalyst.

pH-sensitive biocompatible chitosan/sepiolite-based cross-linked citric acid magnetic nanocarrier for efficient sunitinib release

In this study, the magnetite nanoparticles were immobilized on the sepiolite needles via co-precipitation of iron ions. Then, the resulted magnetic sepiolite (mSep) nanoparticles were coated with chitosan biopolymer (Chito) in the presence of citric acid (CA) to prepare mSep@Chito core-shell drug nanocarriers (NCs). TEM images showed magnetic Fe₃O₄ nanoparticles with small sizes (less than 25 nm) on the sepiolite needles. Sunitinib anticancer drug loading efficiencies were ⁓45 and 83.7 % for the NCs with low and high content of Chito, respectively. The in-vitro drug release results exhibited that the mSep@Chito NCs have a sustained release behavior with high pH-dependent properties. Cytotoxic results (MTT assay) showed that the sunitinib-loaded mSep@Chito2 NC had a significant cytotoxic effect on the MCF-7 cell lines. Also, the in-vitro compatibility of erythrocytes, physiological stability, biodegradability, and antibacterial and antioxidant activities of NCs was evaluated. The results showed that the synthesized NCs had excellent hemocompatibility, good antioxidant properties, and were sufficiently stable and biocompatible. Based on the antibacterial data, the minimal inhibitory concentration (MIC) values for mSep@Chito1, mSep@Chito2, and mSep@Chito3 were obtained as 125, 62.5, and 31.2 μg/mL towards S. aureus, respectively. All in all, the prepared NCs could be potentially used as a pH-triggered system for biomedical applications.

Chitosan modified 5-fluorouracil nanostructured lipid carriers for treatment of diabetic retinopathy in rats: A new dimension to an anticancer drug

Diabetic retinopathy (DR) is one of the chronic complications of diabetes. It includes retinal blood vessels' damage. If untreated, it leads to loss of vision. The existing treatment strategies for DR are expensive, invasive, and need expertise during administration. Hence, there is a need to develop a non-invasive topical formulation that can penetrate deep to the posterior segment of retina and treat the damaged retinal vessels. In addition, it should also provide sustained release. In recent years, novel drug delivery systems (NDDS) have been explored for treating DR and found successful. In this study, chitosan (CS) modified 5-Fluorouracil Nanostructured Lipid Carriers (CS-5-FU-NLCs) were prepared by modified melt emulsification-ultrasonication method and optimized by Box-Behnken Design. The size, polydispersity index, zeta potential and entrapment efficiency of CS-5-FU-NLCs were 163.2 ± 2.3 nm, 0.28 ± 1.52, 21.4 ± 0.5 mV and 85.0 ± 0.2 %, respectively. The in vitro drug release and ex vivo permeation study confirmed higher and sustained drug release in CS-5-FU-NLCs as compared to 5-FU solution. HET-CAM Model ensured the non-irritant nature of CS-5-FU-NLCs. In vivo ocular studies of CS-5-FU-NLCs confirmed antiangiogenic effect of 5-FU by CAM model and diabetic retinopathy induced rat model, indicating successful delivery of 5-FU to the retina.

Polysaccharide-based nanocomposites for biomedical applications: a critical review

Polysaccharides (PSA) have taken specific position among biomaterials for advanced applications in medicine. Nevertheless, poor mechanical properties are known as the main drawback of PSA, which highlights the need for PSA modification. Nanocomposites PSA (NPSA) are a class of biomaterials widely used as biomedical platforms, but despite their importance and worldwide use, they have not been reviewed. Herein, we critically reviewed the application of NPSA by categorizing them into generic and advanced application realms. First, the application of NPSA as drug and gene delivery systems, along with their role in the field as an antibacterial platform and hemostasis agent is discussed. Then, applications of NPSA for skin, bone, nerve, and cartilage tissue engineering are highlighted, followed by cell encapsulation and more critically cancer diagnosis and treatment potentials. In particular, three features of investigations are devoted to cancer therapy, i.e., radiotherapy, immunotherapy, and photothermal therapy, are comprehensively reviewed and discussed. Since this field is at an early stage of maturity, some other aspects such as bioimaging and biosensing are reviewed in order to give an idea of potential applications of NPSA for future developments, providing support for clinical applications. It is well-documented that using nanoparticles/nanomaterials above a critical concentration brings about concerns of toxicity; thus, their effect on cellular interactions would become critical. We compared nanoparticles used in the fabrication of NPSA in terms of toxicity mechanism to shed more light on future challenging aspects of NPSA development. Indeed, the neutralization mechanisms underlying the cytotoxicity of nanomaterials, which are expected to be induced by PSA introduction, should be taken into account for future investigations.

In-vitro evaluation of the 5-fluorouracil loaded GQDs@Bio-MOF capped with starch biopolymer for improved colon-specific delivery

Herein, for the first time, the photoluminescent graphene quantum dots@Bio-metal organic framework (GQDs@Bio-MOF) nanohybrid was prepared. BET analysis obtained the average pore diameter of GQDs@Bio-MOF about 11.97 nm. The existence of nanoscale porosity in GQDs@Bio-MOF displays its suitability for 5-Fu loading owing to the smaller size of 5-Fu. 5-Fu entrapment efficiency and loading capacity were found to be ~42.04 % and ~4.20 %, respectively (5-Fu@GQDs@Bio-MOF). The 5-Fu@GQDs@Bio-MOF was capped with starch biopolymer (St@5-Fu@GQDs@Bio-MOF), fabricated sample displayed 4.67 for pH_PZC. SEM analysis displayed that the St@5-Fu@GQDs@Bio-MOF microspheres have a spherical shape with a diameter of ~2 μm. The in vitro drug release assay displayed better release behavior for St@5-Fu@GQDs@Bio-MOF than 5-Fu@GQDs@Bio-MOF, releasing about 62.3 % of the entrapped 5-Fu within 96 h of incubation. The 5-Fu release showed the best fitting with the Higuchi model with R² 0.9884. The in vitro cytotoxicity screening outcomes displayed that the St@GQDs@Bio-MOF is a promising biocompatible carrier, with cell viability of higher than 84 %. Accumulation of the results revealed that the St@5-Fu@GQDs@Bio-MOF is a new system with advantages of sustained drug release and biocompatibility that are the main criteria for each newly designed anticancer drug carrier.

Chitosan functionalization of metal- and carbon-based nanomaterials as an approach toward sustainability tomorrow

The growing number of nanomaterials-based-products ranging from agriculture to cosmetics to medical, and so on, increases the amount of exposure, compelling researchers to include safety and health protocols in each developed nano-product to ensure consumer safety. As a result, emphasizing the importance of novel nanomaterials' toxicological and safety profiles, as well as their product quality enhancement, is critical. As a result, research efforts must be directed toward developing new nanomaterials in a safer-by-design manner. Chitosan functionalization is an excellent option for this because it is already known for its nontoxicity, biodegradability, and biocompatibility. In this review, we hope to uncover the toxicological consequences of nanomaterials and the potential role of chitosan functionalization in mitigating them. This is an effort to create an environmentally friendly and safe nano-product, ensuring tomorrow's sustainability.

Characterization and Optimization of Real-Time Photoresponsive Gelatin for Direct Laser Writing

There is an abundance of plastic materials used in the widest range of applications, such as packaging, machine parts, biomedical devices and components, etc. However, most materials used today are non-decomposable in the environment, producing a huge burden on ecosystems. The search for better, safer alternatives is still on. Here we present a detailed analysis of a simple, cheap, non-toxic, even edible, eco-friendly material, which can be easily manufactured, laser patterned and used for the fabrication of complex structures. The base substance is gelatin which is made photoresponsive by adding plasticizers and sensitizers. The resulting films were analyzed with respect to their optical, thermal and mechanical properties, which can be modified by a slight variation of chemical composition. The material is optimized for rapid laser-manufacturing of elastic microstructures (lenses, gratings, cantilevers, etc.) without any waste or residues. Overall, the material properties were tailored to increase photothermal responsivity, improve the surface quality and achieve material homogeneity, transparency and long-term stability (as verified using electron microscopy, infrared spectroscopy and differential scanning calorimetry).

Fabrication of Zinc loaded silicon carbide Nanocomposite for in vitro cell viability and in vivo wound dressing care

AIM

In this investigation, Zinc-silicon carbide (Zn-SiC) materials were fabricated by a simple approach by using Zn nanoparticles (Zn-NPs) loaded on silicon carbide (SiC) with enhanced antibacterial and healing activity.

METHODS

Zn-NPs loaded on SiC fabricated by the DIY laser melting technique. The TEM and Zeta-sizer confirmed the morphology and size of the nanoparticles. The characterization was done using Fourier transforms infrared spectroscopy (FTIR), and X-ray diffraction (XRD), Thermogravimetric analysis (TGA). Further, the fabricated nanoparticles were evaluated for their mechanical properties and biocompatibility under storage conditions. In-vivo wound healing was measured by observing a percentage reduction in the wound.

RESULTS

Zn-SiC NPs have 54.6 ± 5.25 nm mean particle size, -15.9 ± 2.35 mV zeta potential with 0.187 ± 0.05 polydispersity index (PD1). The nanoparticles showed good biocompatibility and in-vivo wound healing properties.

CONCLUSIONS

These results strongly support the possibility of using these Zn particles loaded on SiC NPs as a promising wound healing agent after cesarean section.

An Insight of Nanomaterials in Tissue Engineering from Fabrication to Applications

Tissue engineering is a research domain that deals with the growth of various kinds of tissues with the help of synthetic composites. With the culmination of nanotechnology and bioengineering, tissue engineering has emerged as an exciting domain. Recent literature describes its various applications in biomedical and biological sciences, such as facilitating the growth of tissue and organs, gene delivery, biosensor-based detection, etc. It deals with the development of biomimetics to repair, restore, maintain and amplify or strengthen several biological functions at the level of tissue and organs. Herein, the synthesis of nanocomposites based on polymers, along with their classification as conductive hydrogels and bioscaffolds, is comprehensively discussed. Furthermore, their implementation in numerous tissue engineering and regenerative medicine applications is also described. The limitations of tissue engineering are also discussed here. The present review highlights and summarizes the latest progress in the tissue engineering domain directed at functionalized nanomaterials.

A Review on Antibacterial Biomaterials in Biomedical Applications: From Materials Perspective to Bioinks Design

In tissue engineering, three-dimensional (3D) printing is an emerging approach to producing functioning tissue constructs to repair wounds and repair or replace sick tissue/organs. It allows for precise control of materials and other components in the tissue constructs in an automated way, potentially permitting great throughput production. An ink made using one or multiple biomaterials can be 3D printed into tissue constructs by the printing process; though promising in tissue engineering, the printed constructs have also been reported to have the ability to lead to the emergence of unforeseen illnesses and failure due to biomaterial-related infections. Numerous approaches and/or strategies have been developed to combat biomaterial-related infections, and among them, natural biomaterials, surface treatment of biomaterials, and incorporating inorganic agents have been widely employed for the construct fabrication by 3D printing. Despite various attempts to synthesize and/or optimize the inks for 3D printing, the incidence of infection in the implanted tissue constructs remains one of the most significant issues. For the first time, here we present an overview of inks with antibacterial properties for 3D printing, focusing on the principles and strategies to accomplish biomaterials with anti-infective properties, and the synthesis of metallic ion-containing ink, chitosan-containing inks, and other antibacterial inks. Related discussions regarding the mechanics of biofilm formation and antibacterial performance are also presented, along with future perspectives of the importance of developing printable inks.

Influence of Nanoparticles on the Dielectric Response of a Single Component Resin Based on Polyesterimide

The influence of various types of nanoparticle fillers with the same diameter of 20 nm were separately incorporated into a single component impregnating resin based on a polyesterimide (PEI) matrix and its subsequent changes in complex relative permittivity were studied. In this paper, nanoparticles of Al2O3 and ZnO were dispersed into PEI (with 0.5 and 1 wt.%) to prepare nanocomposite polymer. Dielectric frequency spectroscopy was used to measure the dependence of the real and imaginary parts of complex relative permittivity within the frequency range of 1 mHz to 1 MHz at a temperature range from +20 °C to +120 °C. The presence of weight concentration of nanoparticles in the PEI resin has an impact on the segmental dynamics of the polymer chain and changed the charge distribution in the given system. The changes detected in the 1H NMR spectra confirm that dispersed nanoparticles in PEI lead to the formation of loose structures, which results in higher polymer chain mobility. A shift of the local relaxation peaks, corresponding to the α-relaxation process, and higher mobility of the polymer chains in the spectra of imaginary permittivity of the investigated nanocomposites was observed.

A Review on Current Designation of Metallic Nanocomposite Hydrogel in Biomedical Applications

In the past few decades, nanotechnology has been receiving significant attention globally and is being continuously developed in various innovations for diverse applications, such as tissue engineering, biotechnology, biomedicine, textile, and food technology. Nanotechnological materials reportedly lack cell-interactive properties and are easily degraded into unfavourable products due to the presence of synthetic polymers in their structures. This is a major drawback of nanomaterials and is a cause of concern in the biomedicine field. Meanwhile, particulate systems, such as metallic nanoparticles (NPs), have captured the interest of the medical field due to their potential to inhibit the growth of microorganisms (bacteria, fungi, and viruses). Lately, researchers have shown a great interest in hydrogels in the biomedicine field due to their ability to retain and release drugs as well as to offer a moist environment. Hence, the development and innovation of hydrogel-incorporated metallic NPs from natural sources has become one of the alternative pathways for elevating the efficiency of therapeutic systems to make them highly effective and with fewer undesirable side effects. The objective of this review article is to provide insights into the latest fabricated metallic nanocomposite hydrogels and their current applications in the biomedicine field using nanotechnology and to discuss the limitations of this technology for future exploration. This article gives an overview of recent metallic nanocomposite hydrogels fabricated from bioresources, and it reviews their antimicrobial activities in facilitating the demands for their application in biomedicine. The work underlines the fabrication of various metallic nanocomposite hydrogels through the utilization of natural sources in the production of biomedical innovations, including wound healing treatment, drug delivery, scaffolds, etc. The potential of these nanocomposites in relation to their mechanical strength, antimicrobial activities, cytotoxicity, and optical properties has brought this technology into a new dimension in the biomedicine field. Finally, the limitations of metallic nanocomposite hydrogels in terms of their methods of synthesis, properties, and outlook for biomedical applications are further discussed.

Carboxymethyl starch encapsulated 5-FU and DOX co-loaded layered double hydroxide for evaluation of its in vitro performance as a drug delivery agent

Achieving a new oral drug delivery system with controlled drug release behavior is valuable in cancer therapy. Therefore, for the first time, doxorubicin (DOX) and 5-fluorouracil (5-Fu) were simultaneously co-loaded on the as-synthesized layered double hydroxides LDH(MgAl). The resulted system was encapsulated with carboxymethyl starch to improve its efficiency for colon cancer therapy. Several characterization techniques were used to evaluate the successful synthesis of the CMS@LDH(MgAl)@DOX,5-Fu microspheres. The scanning electron microscopy result showed that the size of prepared microspheres is about 72 μm. Additionally, the presence of one broad peak at 2θ ~ 20 of the X-ray diffraction spectrum approved its amorph nature. The drug release study showed a controlled release profile with ~22% of DOX and 29% of 5-Fu. In addition, the cell viability test outcome confirmed the sustained drug release pattern from CMS@LDH(MgAl)@DOX,5-Fu against the colon cancer cell line. The results suggest that the prepared microspheres are capable to operate as an acceptable formulation for oral co-drug delivery.

Folic acid-modified photoluminescent dialdehyde carboxymethyl cellulose crosslinked bionanogels for pH-controlled and tumor-targeted co-drug delivery

This work aimed to fabricate a new photoluminescent bionanogel with both targeted anticancer drug delivery and bioimaging potentials. Briefly, at first photoluminescent carbon dots (CDs) were synthesized from the low-cost and more available black pepper with traditional medicinal properties. The as-synthesized dialdehyde carboxymethyl cellulose (DCMC) was used as a safe crosslinker for gelatin crosslinking in the presence of CDs (CDs/DCMC-Gel). Eventually, the residual amine functional groups of gelatin were used for the conjugation of CDs/DCMC-Gel with folic acid (FA) ((CDs/DCMC-Gel)-FA bionanogels). All employed physicochemical characterization methods approved the (CDs/DCMC-Gel)-FA bionanogels fabrication route. SEM analysis specified the spherical morphology with a diameter of ~70-90 nm for it. Curcumin (CUR) and doxorubicin (DOX) respectively were loaded with drug entrapment efficiency of about 44.0% and 41.4%. The release rate for both drugs in acidic conditions was higher than in physiological conditions. In vitro antitumor experiments; MTT, DAPI staining, cellular uptake, and cell cycle tests showed the superior anticancer effect of the CUR@DOX@(CDs/DCMC-Gel)-FA in comparison with free CUR@DOX. Moreover, the (CDs/DCMC-Gel)-FA acted as a hopeful bio-imaging tool. Taken together, the designed (CDs/DCMC-Gel)-FA could be proposed as a promising nanosystem for efficient chemotherapy.

Effectiveness of 5-Fluorouracil and gemcitabine hydrochloride loaded iron‑based chitosan-coated MIL-100 composite as an advanced, biocompatible, pH-sensitive and smart drug delivery system on breast cancer therapy

This study was planned to evolve the bioavailability and therapeutic efficiency of Gemcitabine (GEM) and 5-Fluorouracil with decreased side effects using MIL-100 nano-composite as carrier. Impregnation approach was used for encapsulation of 5-Fluorouracil alone and with GEM inside the MIL-100. The formed 5-Fluorouracil@MIL-100 and 5-Fluorouracil-GEM@MIL-100 were then coated with chitosan, sequentially chelated with iron(III) and conjugated with quercetin, eventually obtaining a multifunctional MIL-100 nanocarrier. The hybrid nanocarrier nascency was verified by different characterization results. pH-sensitive releases of 5-Fluorouracil and GEM were observed because of the inherent pH-dependent stability of MIL-100. Additionally, we evaluated the anti-cancer activity of these nanocarriers through WST-1 analysis and acridine orange staining in MCF-7 human breast cancer and HUVEC control cell lines. Our findings showed that all nanocarriers exhibited anti-cancer activity and induced apoptosis in MCF-7 cells. However, 5-Fluorouracil@MIL-100 and chitosan-coated 5-Fluorouracil@MIL-100 with quercetin were more effective than other nanocarriers in MCF-7 cells (p < 0.05). Moreover, we observed cytotoxicity in HUVEC cells due to the adverse side effects of chemotherapy drugs. However, chitosan coated nanocarriers with quercetin were less toxic on HUVEC cells at particularly 1 µg/mL. Therefore, MIL-100 could be used for a promising chemotherapeutic drugs delivery and chitosan coated drugs with quercetin could be useful for reducing toxicity on normal cells.

Bioactive Chitosan-Based Organometallic Scaffolds for Tissue Engineering and Regeneration

Captivating achievements in developing advanced hybrid biostructures through integrating natural biopolymers with inorganic materials (e.g., metals and metalloids) have paved the way towards the application of bioactive organometallic scaffolds (OMSs) in tissue engineering and regenerative medicine (TERM). Of various biopolymers, chitosan (CS) has been used widely for the development of bioactive OMSs, in large part due to its unique characteristics (e.g., biocompatibility, biodegradability, surface chemistry, and functionalization potential). In integration with inorganic elements, CS has been used to engineer advanced biomimetic matrices to accommodate both embedded cells and drug molecules and serve as scaffolds in TERM. The use of the CS-based OMSs is envisioned to provide a new pragmatic potential in TERM and even in precision medicine. In this review, we aim to elaborate on recent achievements in a variety of CS/metal, CS/metalloid hybrid scaffolds, and discuss their applications in TERM. We also provide comprehensive insights into the formulation, surface modification, characterization, biocompatibility, and cytotoxicity of different types of CS-based OMSs.

Application or function of citric acid in drug delivery platforms

Nontoxic materials with natural origin are promising materials in the designing and preparation of the new drug delivery systems (DDSs). Today's, citric acid (CA) has attracted a great deal of attention because of its special features; green nature, biocompatibility, low price, biodegradability, and commercially available property. So, CA has been employed in the preparation of the various platforms to induce a suitable property on their structure. Recently, several research groups investigated the CA-based platforms in different forms like tablets, dendrimers, hyperbranched polymers, (co)polymer, hydrogels, and nanoparticles as efficient DDSs. By considering an increasing amount of published articles in this field, for the first time, in this review, an overview of the published works regarding CA applications in the design of various DDSs is presented with a detailed and insightful discussion.

Nanodiamond-chitosan functionalized hernia mesh for biocompatibility and antimicrobial activity

Polypropylene (PP) mesh is most commonly used for the treatment of hernia and pelvic floor construction. However, some of the patients have a few complications after surgery due to the rejection or infection of the implanted meshes. The poor biocompatibility of PP mesh, low wettability results in poor cell attachment/proliferation and restricts the loading of antibacterial agent, leading to a slow healing process and high risk of infection after surgery. Here in this study, a new technique has been employed to develop a novel antimicrobial and biocompatible PP mesh modified with bioactive chitosan and functionalized nanodiamond (FND) for infection inhibition and acceleration of the healing process. An oxygen plasma treatment PP mesh was used then chitosan was strongly attached to the surface of the PP fibers. Subsequently, FND as an antibacterial agent was loaded into the chitosan modified PP fiber to provide desired antibacterial functions. The meshes were characterised with XRD, FTIR, SEM, EDX, water contact angle, confocal, and optical microscopy. The modified PP mesh with chitosan and FND showed a significant increase in its hydrophilicity and L929 fibroblast cell attachment. Furthermore, the modified mesh exhibited great antibacterial efficiency against Escherichia coli. Therefore, the newly developed technique to modify PP mesh could be a promising technique to generate a biocompatible PP mesh to accelerate the healing process and reduce the risk of infection after surgery.

Hybrid Gelatin Hydrogels in Nanomedicine Applications

Gelatin based hydrogels are often incorporated with supporting materials such as chitosan, poly(vinyl alcohol), alginate, carbon nanotubes, and hyaluronic acid. These hybrid materials are specifically of interest in diversified nanomedicine fields as they exhibit unique physicochemical properties, antimicrobial activity, biodegradability, and biocompatibility. The applications include drug delivery, wound healing, cell culture, and tissue engineering. This paper reviews the various up-to-date methods to fabricate gelatin-based hydrogels, including UV photo-cross-linking, electrospinning, and 3D bioprinting. This paper also includes physical, chemical, mechanical, and biocompatibility characterization studies of several hybrid gelatin hydrogels and discusses their relevance in nanomedicine based applications. Challenges associated with the fabrication of hybrid materials for nanotechnology implementation, specifically in nanomedicine development, are critically discussed, and some future recommendations are provided.

Functional Properties of Sonochemically Synthesized Zinc Oxide Nanoparticles and Cotton Composites

In this study, zinc oxide nanoparticles (nZnO) were synthesized, deposited, and successfully used for surface modification of cotton to enhance antimicrobial properties. An in situ ultrasonic acoustic method was applied to anchor nZnO on cotton. The results of scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction confirmed the presence of nZnO on cotton. A homogenous distribution of nZnO with an average particle size 27.4 nm was found during the analysis of results. Antimicrobial performance of cotton-nZnO (C-nZnO) composites was evaluated against Gram-negative and Gram-positive microbes. The deposited amount of nZnO on C-nZnO composites was determined by volumetric titration through inductive couple plasma atomic emission spectroscopy. C-nZnO composites showed excellent antimicrobial performance especially against both Staphylococcus aureus (Gram-positive) and Escherichia coli. The durability and stability of C-nZnO composites were tested against leaching and washing. No significant fluctuation was found on deposited amount of nZnO before and after washing test for optimized sample. The results demonstrate that synthesized C-nZnO composite samples can be used as an alternative for antimicrobial bandages.

Nanocomposite hydrogels for tissue engineering applications

Tissue engineering is an important field of regenerative medicine, which combines scaffolds and cell transplantation to develop substitute tissues and/or promote tissue regeneration. Hydrogels, a three-dimensional network with high water content and biocompatibility, have been widely used as scaffolds to mimic the structure and properties of tissues. However, the low mechanical strength and limited functions of traditional hydrogels greatly limited their applications in tissue engineering. Recently, nanocomposite hydrogels, with its advantages of high mechanical property and some unique properties (such as electrical conductivity, antibacterial, antioxidation, magnetic responsiveness), have emerged as the most versatile and innovative technology, which provides a new opportunity as a unique tool for fabricating hydrogels with excellent properties. In this review, we summarize the recent advances in fabricating nanocomposite hydrogels and their applications in tissue engineering. In addition, the future and prospects of nanocomposite hydrogels for tissue engineering are also discussed.