What kind of "soft materials" can we design from molecular gels?

A 15-crown-5-ether-based supramolecular hydrogel with selection ability for potassium cations via gelation and colour change

We developed a novel supramolecular hydrogelator possessing a benzo-15-crown-5 (B15C5) moiety. The hydrogelator can detect colourless potassium cations (K+) via easily readable gelation and colour change arising from a change in the molecular assembling ability through host-guest interactions between B15C5 and K+, which afford a B15C5/K+/B15C5 sandwich complex.

Chemiluminescent Reaction Induced by Mixing of Fluorescent-Dye-Containing Molecular Organogels with Aqueous Oxidant Solutions

Chemiluminescence in solution-based systems has been extensively studied for the chemical analysis of biomolecules. However, investigations into the control of chemiluminescence reactions in gel-based systems, which offer flexibility in reaction conditions (such as the softness of the reaction environment), have only recently begun in polymer materials, with limited exploration in low-molecular-weight gelator (LMWG) systems. In this study, we investigated the chemiluminescence behaviors in the gel states using LMWG systems and evaluated their applicability to fluorescent-dye-containing molecular organogel systems/oxidant-containing aqueous systems. Using diethyl succinate organogels composed of 12-hydroxystearic acid as a molecular organogelator, we examined the fluorescent properties of various fluorescent dyes mixed with oxidant aqueous solutions. As the reaction medium transitioned from the solution to the gel state, the emission color and chemiluminescence duration changed significantly, and distinct characteristics were observed, for each dye. This result indicates that the chemiluminescence behavior differs significantly between the solution and gel states. Additionally, visual inspection and dynamic viscoelastic measurements of the mixed fluorescent dye-containing molecular gels and oxidant-containing aqueous solutions confirmed that the chemiluminescence induced by the mixing occurred within the gel phase. Furthermore, the transition from the solution to the gel state may allow for the modulation of the mixing degree, thereby enabling control over the progression of the chemiluminescence reaction.

Harnessing Glycolipids for Supramolecular Gelation: A Contemporary Review

Within the scope of this review, our exploration spans diverse facets of amphiphilic glycolipid-based low-molecular-weight gelators (LMWGs). This journey explores glycolipid synthesis, self-assembly, and gelation with tailorable properties. It begins by examining the design of glycolipids and their influence on gel formation. Following this, a brief exploration of several gel characterization techniques adds another layer to the understanding of these materials. The final section is dedicated to unraveling the various applications of these glycolipid-based supramolecular gels. A meticulous analysis of available glycolipid gelators and their correlations with desired properties for distinct applications is a pivotal aspect of their investigation. As of the present moment, there exists a notable absence of a review dedicated exclusively to glycolipid gelators. This study aims to bridge this critical gap by presenting an overview that provides novel insights into their unique properties and versatile applications. This holistic examination seeks to contribute to a deeper understanding of molecular design, structural characteristics, and functional applications of glycolipid gelators by offering insights that can propel advancements in these converging scientific disciplines. Overall, this review highlights the diverse classifications of glycolipid-derived gelators and particularly emphasizes their capacity to form gels.

Ultralight aerogels via supramolecular polymerization of a new chiral perfluoropyridine-based sulfonimidamide organogelator

Chiral and enantiopure perfluorinated sulfonimidamides act as low-molecular weight gelators at low critical gelation concentration (<1 mg mL-1) via supramolecular polymerization in nonpolar organic solvents and more heterogenic mixtures, such as biodiesel and oil. Freeze-drying of the organogel leads to ultralight aerogel with extremely low density (1 mg mL-1). The gelation is driven by hydrogen bonding resulting in a helical molecular ordering and unique fibre assemblies as confirmed by scanning electron microscopy, CD spectroscopy, and computational modeling of the supramolecular structure.

Development of Thixotropic Molecular Oleogels Comprising Alkylanilide Gelators by Using a Mixing Strategy

Molecular oleogels have the potential to be used as materials in healthcare applications. However, their design and synthesis are complex, thus requiring simple and effective methods for their preparation. This paper reports on alkylanilides that are low molecular-weight organogelators, which when appropriately mixed with different alkyl chain lengths could result in the formation of mixed molecular gels that exhibit excellent gel-forming ability and mechanical properties. In addition, the single and mixed molecular organogel systems were found to be applicable as single and mixed molecular oleogel systems capable of gelling oils such as olive oil and squalane. This has been found to be true, especially in molecular oleogel systems consisting of squalane, which is used as solvents in healthcare. The mixed squalene-molecular oleogel systems showed an increase in the critical (minimum) gelation concentration from 1.0 to 0.1 wt.% in the single system and an improvement in the thixotropic behavior recovery time. The thixotropic behavior of the molecular oleogels in the mixed system was quantitatively evaluated through dynamic viscoelasticity measurements; however, it was not observed for the single-system molecular oleogels. Scanning electron microscopy of the xerogels suggested that this behavior is related to the qualitative improvement of the network owing to the refinement of the mesh structure. These mixed molecular oleogels, composed of alkylanilides displaying such thixotropic behavior, could be used as candidates for ointment-base materials in the healthcare field.

Beyond Sol-Gel: Molecular Gels with Different Transitions

The existence of sol–gel transitions is one of the most manifest properties of molecular gels. These transitions reflect their nature since they correspond to the association or dissociation of low weight molecules through non-covalent interactions to form the network constitutive of the gel. Most described molecular gels undergo only one gel-to-sol transition upon heating, and the reverse sol-to-gel transition upon cooling. It has been long observed that different conditions of formation could lead to gels with different morphologies, and that gels can undergo a transition from gel to crystals. However, more recent publications report molecular gels which exhibit additional transitions, for instance gel-to-gel transitions. This review surveys the molecular gels for which, in addition to sol–gel transitions, transitions of different nature have been reported: gel-to-gel transitions, gel-to-crystal transition, liquid–liquid phase separations, eutectic transformations, and synereses.

A "heat set" Zr-Diimide based Fibrous Metallogel: Multiresponsive Sensor, Column-based Dye Separation, and Iodine Sequestration

Sensing and monitoring hazardous contaminants in water and radioactive iodine sequestration is pivotal due to their detrimental impact on biological ecosystems. In this context, herein, a water stable zirconium-diimide based metallogel (Zr@MG) with fibrous columnar morphology is accomplished through the "heat set" method. The presence of diimide linkage with long aromatic chain manifests active luminescence properties in the linker as well as in the supramolecular framework structure. The as-synthesized Zr@MG xerogel can selectively detectCr₂O₇^2- (LOD = 0.52 ppm) and 2,4,6-trinitrophenol (TNP) (LOD = 80.2 ppb) in the aqueous medium. The Zr@MG paper strip-based detection for Cr₂O₇^2- and nitro explosive makes this metallogel reliable and an attractive luminescent sensor for practical use. Moreover, a column-based dye separation experiment was performed to show selective capture of positively charged methylene blue (MB) dye with 98 % separation efficiency from the mixture of two dyes. Also, the Zr@MG xerogel showed effective iodine sequestration from the vapor phase (232 wt%).

The Effect of Branched Alkyl Chain Length on the Properties of Supramolecular Organogels from Mono-N-Alkylated Primary Oxalamides

Mono-N-alkylated primary oxalamide derivatives with different sized branched alkyl tail-groups were excellent low molecular weight gelators for a variety of different organic solvents with different polarities and hydrogen-bonding abilities. Solvent-gelator interactions were analyzed using Hansen solubility parameters, while ¹H NMR and FTIR spectroscopy were used to probe the driving forces for the supramolecular gelation. The molecular structures of the twin tail-groups did not significantly affect the supramolecular gelation behavior in different solvents. However, for select solvents, the molecular structures of the tail-groups did have a significant effect on gel properties such as the critical gelator concentration, thermal stability, gel stiffness, gel strength, network morphology, and molecular packing. Finally, metabolic activity studies showed that the primary alkyl oxalamide gelators had no effect on the metabolic activity of mouse immune cells, which suggests that the compounds are not cytotoxic and are suitable for use in biomedical applications.

Structural insights into self-assembly of a slow-evolving and mechanically robust supramolecular gel via time-resolved small-angle neutron scattering

The supramolecular assembly process is a widespread phenomenon found in both synthetically engineered and naturally occurring systems, such as colloids, liquid crystals and micelles. However, a basic understanding of the evolution of self-assembly processes over time remains elusive, primarily owing to the fast kinetics involved in these processes and the complex nature of the various non-covalent interactions operating simultaneously. With the help of a slow-evolving supramolecular gel derived from a urea-based gelator, we aim to capture the different stages of the self-assembly process commencing from nucleation. In particular, we are able to study the self-assembly in real time using time-resolved small-angle neutron scattering (SANS) at length scales ranging from approximately 30 Å to 250 Å. Systems with and without sonication are compared simultaneously, to follow the different kinetic paths involved in these two cases. Time-dependent NMR, morphological and rheological studies act complementarily to the SANS data at sub-micron and bulk length scales. A hollow columnar formation comprising of gelator monomers arranged radially along the long axis of the fiber and solvent in the core is detected at the very early stage of the self-assembly process. While sonication promotes uniform growth of fibers and fiber entanglement, the absence of such a stimulus helps extensive bundle formation at a later stage and at the microscopic domain, making the gel system mechanically robust. The results of the present work provide a thorough understanding of the self-assembly process and reveal a path for fine-tuning such growth processes for applications such as the cosmetics industry, 3D printing ink development and paint industry.

Polymeric Hydrogelator-Based Molecular Gels Containing Polyaniline/Phosphoric Acid Systems

To expand the range of applications of hydrogels, researchers are interested in developing novel molecular hydrogel materials that have affinities for the living body and the ability to mediate electrical signals. In this study, a simple mixing method for creating a novel composite molecular gel is employed, which combines a hydrophilic conductive polymer, a polyaniline/phosphoric acid complex, and a polymer hydrogelator as a matrix. The composite hydrogel showed an improved gel-forming ability; more effective mechanical properties, with an increased strain value at the sol-gel transition point compared to the single system, which may be sufficient for paintable gel; and a better electrochemical response, due to the electrically conducting polyaniline component. These findings demonstrate the applicability of the new composite hydrogels to new potential paintable electrode materials.

Functional supramolecular gels based on poly(benzyl ether) dendrons and dendrimers

Supramolecular gels, as a fascinating and useful class of soft materials, constructed from low-molecular-weight gelators via noncovalent interactions have attracted increasing attention in the past few decades. Dendrimers and dendrons are highly branched and monodisperse macromolecules with a well-defined three-dimensional architecture and multiple surface functionalities. In recent years, poly(benzyl ether) dendrimers and dendrons are found to be powerful candidates for constructing gel phase materials in organic or aqueous media due to the advantages of capability of forming multiple noncovalent interactions and significant steric impact. In this Feature Article, we provide a comprehensive overview of recent progress in supramolecular gels involving poly(benzyl ether) dendritic molecules. Firstly, we outline the molecular design strategies of dendritic gelators with an emphasis on the discussion of their gelating units and position in molecular structures. Subsequently, we discuss the potential applications of dendritic gels in light harvesting, stimuli responsive materials, sensors and environmental remediation. In addition, the potential challenges and future perspectives of poly(benzyl ether) dendritic gels have also been discussed. It is hoped that this feature article will attract increasing attention and provide some valuable insights for the future design and evolution of supramolecular gels.

Stearoylamido-D-Glucamine Hydrogelators for Thixotropic Molecular Gels with Tunable Softness by Chemical Modification

Low-molecular-weight hydrogelators containing stearoyl, glycine, and D-glucamine moieties with or without methyl groups were synthesized to prepare chemically tuned molecular hydrogels. To evaluate the role of hydrogen bonding of hydrogelators in molecular hydrogel formation, the author has newly synthesized hydrogelators with or without methyl groups at their N-H in amide groups, contributing to the hydrogen bond formation in fiber in molecular hydrogels. The obtained hydrogels exhibited improved thixotropic performance with tunable softness, exhibiting pseudo-reversible thixotropic cycles that depended on the methyl substitution positions in the hydrogelators. To change the hydrogen bonds' positions by chemical modification has made it possible to tune the mechanical properties of molecular gels.

Multiple Stimuli-Responsive Supramolecular Gel Formed from Modified Adenosine

Urea derivatives 1 and 2, synthesized from adenosine, were designed as low-molecular-weight gelators. Hydrophobic groups have been introduced into all or part of the hydroxy groups of the hydrophilic ribose moiety of 1 and 2 to control the solvophilicity of the molecules and their aggregates. Compound 2 selectively formed supramolecular gels in halogenated solvents such as chloroform and 1,2-dichloroethane. The supramolecular gel of 2 and chloroform was thermally stable and its gel-to-sol phase transition temperature was higher than the boiling point of chloroform. The physical properties of the supramolecular gel were investigated by determining its viscoelastic properties using a rheometer. The supramolecular gel realized multiple stimuli-responsive reversible gel-sol phase transitions. The supramolecular gel showed reversible phase transition by repeated warming-cooling cycles accompanying with the gel-sol transitions. The supramolecular gel could undergo five repeated mechano-responsive gel-sol transitions. Gel-to-sol phase transition could also be achieved by adding various anions to the supramolecular gel, such as tetrabutylammonium fluoride. Regelation was realized by adding boron trifluoride etherate to the fluoride ion containing sol. Addition of methanol to the supramolecular gel also induced gel-to-sol phase transition. Regelation was realized by adding molecular sieves 4 Å to the suspension.

Manipulating Assemblies in Metallosupramolecular Gels, Driven by Isomeric Ligands, Metal Coordination, and Adaptive Binary Gelator Systems

Metallosupramolecular gel (MSG) is a unique combination of metal-ligand coordination chemistry and supramolecular gel chemistry with extraordinary adaptivity and softness. Such materials find broad uses in industry, pharmaceutical and biomedical sectors, and in technology generation among many others. Pyridyl-appended bis(urea) gelator systems have been extensively studied as potential MSG-forming materials in the presence of various metal ions. The previous molecular engineering approaches depicted competitive intermolecular and intramolecular binding modes involving urea and pyridyl groups and further fine-tuned by the presence of various molecular spacers. In those studies, formation of intermolecular hydrogen bonding among urea moieties to form urea tape was found to be the key factor in one-dimensional assembly and gel formation. In the present study, we show how two isomeric pyridyl-appended bis(urea) ligands can be designed appropriately to essentially eliminate the interference of competitive factors, leaving the intermolecular urea assembly practically unaffected even in the presence of metal ions. We found that one of the two ligands (L2) and the mixed ligand (L1 + L2) assemblies formed gel in the presence and absence of various metal ions. A metal ion with a linear coordination geometry significantly strengthened the gels. Moreover, an inherently weak L1 + L2 assembly appears to be more adaptive in accommodating larger metal ions especially with nonlinear coordination geometry preferences. Small-angle neutron scattering and rheological, spectroscopic, and morphological characterizations, collectively, capture a detailed interplay among ligand assembly, metal-ligand coordination, and adaptivity, driven by the pure versus mixed ligand assemblies. The knowledge gathered from the present study would be highly beneficial in engineering the metallosupramolecular polymeric assemblies toward their functional applications.

Hierarchical Self-Assembly and Multidynamic Responsiveness of Fluorescent Dynamic Covalent Networks Forming Organogels

Smart stimuli-responsive fluorescent materials are of interest in the context of sensing and imaging applications. In this project, we elaborated multidynamic fluorescent materials made of a tetraphenylethene fluorophore displaying aggregation-induced emission and short cysteine-rich C-hydrazide peptides. Specifically, we show that a hierarchical dynamic covalent self-assembly process, combining disulfide and acyl-hydrazone bond formation operating simultaneously in a one-pot reaction, yields cage compounds at low concentration (2 mM), while soluble fluorescent dynamic covalent networks and even chemically cross-linked fluorescent organogels are formed at higher concentrations. The number of cysteine residues in the peptide sequence impacts directly the mechanical properties of the resulting organogels, Young's moduli varying 2500-fold across the series. These materials underpinned by a nanofibrillar network display multidynamic responsiveness following concentration changes, chemical triggers, as well as light irradiation, all of which enable their controlled degradation with concomitant changes in spectroscopic outputs─self-assembly enhances fluorescence emission by ca. 100-fold and disassembly quenches fluorescence emission.

Phase-Selective Gelation of the Water Phase in an Oil-Water Mixture: An Approach Based on Oil-Activated Nanoparticle Assembly in Water

Phase-selective gelation refers to the selective gelation of one phase in an immiscible mixture. Thus far, all such examples have involved a molecular gelator forming nanofibers in (and thus gelling) the oil phase in an oil/water mixture. Here, for the first time, we report the counterpart to the above phenomenon, i.e., selective gelation of the water phase in an oil/water mixture (while leaving the oil undisturbed). This has been a challenging problem because moieties that gel water tend to be either amphiphilic or oil-soluble; thus, if combined with an oil/water mixture, they invariably form an emulsion. Our approach solves this problem by exploiting the tunable self-assembly of laponite (LAP) nanoparticles. Initially, LAP nanoparticles (25 nm disks) are dispersed in water, where they remain unaggregated due to the steric stabilization provided by a triblock copolymer (Pluronic P123) adsorbed on their surface. Thus, the dispersion is initially a low-viscosity sol. When an immiscible oil such as hexadecane is introduced above the sol, the mixture remains biphasic, and both phases remain unaffected. Next, an organic acid such as butanoic acid (BA) is added to the oil. The BA is oil-soluble but also has limited solubility in the water. Over about 30 min, some of the BA enters the water, whereupon it "activates" the self-assembly of LAP particles into a three-dimensional "house-of-cards" network. Ultimately, the water phase is converted into a homogeneous gel with a sufficient yield stress: the aqueous gel holds its weight in the inverted vial while the oil phase remains a thin liquid that can be poured out of the vial. On the whole, the concept advanced here is about activating nanoparticle assembly in water through an adjacent, immiscible phase. This concept could prove useful in conducting certain separations or reactions in the laboratory as well as in enhanced oil recovery.

Energetics of Competing Chiral Supramolecular Polymers

Chirality can have unexpected consequences including on properties other than spectroscopic. We show herein that a racemic mixture of bis-urea stereoisomers forms thermodynamically stable supramolecular polymers that result in a more viscous solution than for the pure stereoisomer. The origin of this macroscopic property was probed by characterizing the structure and stability of the assemblies. Both racemic and non-racemic bis-urea stereoisomers form two competing helical supramolecular polymers in solution: a double and a single helical structure at low and high temperature, respectively. The transition temperature between these assemblies, as probed by spectroscopic and calorimetric analyses, is strongly influenced by the composition (by up to 70 °C). A simple model that accounts for the thermodynamics of this system, indicates that the stereochemical defects (chiral mismatches and helix reversals) affect much more the stability of single helices. Therefore, the heterochiral double helical structure predominates over the single helical structure (whilst the opposite holds for the homochiral structures), which explains the aforementioned higher viscosity of the racemic bis-urea solution. This rationale constitutes a new basis to tune the macroscopic properties of the increasing number of supramolecular polymers reported to exhibit competing chiral nanostructures.

Effect of Alkyl Chain Length of N-Alkyl-N'-(2-benzylphenyl)ureas on Gelation

Urea derivatives that were substituted with a 2-benzylphenyl group and an alkyl group functioned as low molecular weight gelators for various organic solvents and ionic liquids. Urea derivatives with long alkyl chains were effective for the gelation of polar solvents. However, they were not suitable for the gelation of non-polar solvents, whereas urea derivatives with short alkyl chains were effective. Ionic liquids were similar to polar solvents in that urea derivatives with long alkyl chains were the most effective gelators. The physical properties of the formed supramolecular gels were analyzed by dynamic viscoelasticity measurements using a rheometer.

Double-Helix Supramolecular Nanofibers Assembled from Negatively Curved Nanographenes

The layered structures of graphite and related nanographene molecules play key roles in their physical and electronic functions. However, the stacking modes of negatively curved nanographenes remain unclear, owing to the lack of suitable nanographene molecules. Herein, we report the synthesis and one-dimensional supramolecular self-assembly of negatively curved nanographenes without any assembly-assisting substituents. This curved nanographene self-assembles in various organic solvents and acts as an efficient gelator. The formation of nanofibers was confirmed by microscopic measurements, and an unprecedented double-helix assembly by continuous π-π stacking was uncovered by three-dimensional electron crystallography. This work not only reports the discovery of an all-sp²-carbon supramolecular π-organogelator with negative curvature but also demonstrates the power of three-dimensional electron crystallography for the structural determination of submicrometer-sized molecular alignment.

Synthesis and Self-Assembly Properties of Bola-Amphiphilic Glycosylated Lipopeptide-Type Supramolecular Hydrogels Showing Colour Changes Along with Gel-Sol Transition

Supramolecular hydrogels formed by self-assembly of low-molecular-weight amphiphiles (hydrogelators) have attracted significant attention, as smart and soft materials. However, most of the observed stimuli-responsive behaviour of these supramolecular hydrogels are limited to gel-sol transitions. In this study, we present bola-amphiphilic glycosylated lipopeptide-type supramolecular hydrogelators that exhibit reversible thermochromism along with a gel-sol transition. The bola-amphiphiles have mono-, di-, tri- or tetra-phenylalanine (F) as a short peptide moiety. We investigate and discuss the effects of the number of F residues on the gelation ability and the morphology of the self-assembled nanostructures.

K. AK, Sagar S, Das S, Varghese R. Blue-emissive two-component supergelator with aggregation-induced enhanced emission

Two-component organogels offer several advantages over one-component gels, but their design is highly challenging. Hence, it is extremely important to design new approaches for the crafting of two-component organogels with interesting optical and mechanical properties. Herein, we report the design of a new class of two-component supergelators obtained from the assembly between acid functionalized tetraphenylethylene (TPE)-based dendrons and alkylated melamine. No gelation behaviour is observed for the individual components, but interestingly, remarkable gelation behaviour is observed for their hydrogen-bonded complex. The primary driving force responsible for the gelation is the strong π–π stacking interaction of TPE units. Because of the strong π-stacking of TPEs in the gel state, the C(sp²)–C(sp²) bond rotation of the TPE segment is completely arrested in the gel state, which results in intense fluorescence emission of the gels. Furthermore, excellent elastic response is observed for the gels as evident from their high storage modulus compared to loss modulus values. Our results clearly demonstrate that by the appropriate selection of the molecular components, this approach can be applied for the creation of functional nanomaterials with emergent properties absent in the individual blocks.

Design of a novel class of two-component, highly emissive, low molecular weight supergelator is reported.

Structural diversification of bola-amphiphilic glycolipid-type supramolecular hydrogelators exhibiting colour changes along with the gel-sol transition

We diversified the structures of bola-amphiphilic glycolipid-type supramolecular hydrogelators that exhibited reversible thermochromism along with a gel-sol transition. The hydrogelators were designed and synthesized to have homo- or hetero-saccharides on each end of their molecules. Herein, the effects of the saccharides' structure on the gelation ability are discussed.

Monopeptide-Based Powder Gelators for Instant Phase-Selective Gelation of Aprotic Aromatics and for Toxic Dye Removal

Through a combinatorial screening of 35 possible phase-selective monopeptide-based organogelators readily made at low cost, we identified five of them with high gelling ability toward aprotic aromatic solvents in the powder form. The best of them (Fmoc-V-6) is able to instantly and phase-selectively gel benzene, toluene, and xylenes in the presence of water at room temperature at a gelator loading of 6% w/v. This enables the gelled aromatics to be separated by filtration and both aromatics and the gelling material to be recycled by distillation. We also identified Fmoc-I-16 as the best gelator for benzyl alcohol, and the corresponding organogel efficiently removes toxic dye molecules by 82-99% from their highly concentrated aqueous solutions. These efficient removals of toxic organic solvents and dyes from water suggest their promising applications in remediating contaminated water resources.

A near-infrared fluorescent phthalocyanine liquid developed through controlling intermolecular interactions

A near-infrared fluorescent phthalocyanine (Pc) liquid was developed through introducing bulky yet flexible units onto the Pc skeleton.

Gelating Abilities of Two-Component System of Catecholic Derivatives and a Boronic Acid

In the last two decades, various kinds of the low-molecular-weight organogelators (LMOGs) have been investigated in terms of technological applications in various fields as well as their fundamental scientific properties. The process of gelation is generally considered to arise from immobilization of the solvents in the three-dimensional networks formed by the assembly of gelator molecules through weak intermolecular noncovalent interactions. From these points of view a huge number of organogelators have been developed so far. In the course of our research on LMOGs we have noticed a mixture of two gelators could show a different trend in gelation compared to the single gelator. It is well known that the catecholic moiety easily forms cyclic boronate esters with the boronic acid. Thus, we have investigated the two-component system based on cyclic boronate esters formed by the catechols and a boronic acid in terms of the control of gelation capability. Basic gelation properties of the constituent catecholic gelators have also been clarified. The catecholic gelators with the amide unit form no gel by addition of the boronic acid. In contrast, the catecholic gelators with the glutamic acid moiety improve their gelation abilities by mixing with the boronic acid. Furthermore, the gelation ability of the catecholic gelators having the urea unit is maintained after addition of the boronic acid. It has been found that gelation abilities of the catecholic gelators are highly affected by addition of the boronic acid. In terms of practical applications some gels can be obtained by on-site mixture of two kinds of solutions.

A Competing Hydrogen Bonding Pattern to Yield a Thermo-Thickening Supramolecular Polymer

Introduction of competing interactions in the design of a supramolecular polymer (SP) creates pathway complexity. Ester-bis-ureas contain both a strong bis-urea sticker that is responsible for the build-up of long rod-like objects by hydrogen bonding and ester groups that can interfere with this main pattern in a subtle way. Spectroscopic (FTIR and CD), calorimetric (DSC), and scattering (SANS) techniques show that such ester-bis-ureas self-assemble into three competing rod-like SPs. The previously unreported low-temperature SP is stabilized by hydrogen bonds between the interfering ester groups and the urea moieties. It also features a weak macroscopic alignment of the rods. The other structures form isotropic dispersions of rods stabilized by the more classical urea-urea hydrogen bonding pattern. The transition from the low-temperature structure to the next occurs reversibly by heating and is accompanied by an increase in viscosity, a rare feature for solutions in hydrocarbons.

Highly Efficient Recovery of Oils in Water via Serine-Based Organogelators

We report here the gelation of a series of petroleum products by serine derivatives. Among Fmoc (9-fluorenylmethoxycarbonyl) amino acids modified by long-chain amines with different substituents, serine-based compounds exhibit excellent performance in gel formation. Further studies on the variation of serine-based gelators demonstrate a considerable structure-property relationship between oil gelation performance and the molecular structure. Oils could be separated and collected by acid and distillation. Gelators exhibit the potential to be applied in an effective treatment of oil-containing water produced from frequent marine oil spills.

Supramolecular Gel as the Template for Catalysis, Inorganic Superstructure, and Pharmaceutical Crystallization

A supramolecular gel is a fascinating combination of flexibility and orderliness. While the supramolecular nature of crosslinking contributes towards the adaptivity and the reversibility of the system, orderliness at the molecular level amplifies the functional output and induces extraordinary selectivity into the system. Therefore, use of supramolecular gels as the soft template is an emerging area of research, which includes but not limited to catalysis of a chemical or a photochemical process, transcription of gel property to a substrate, or even controlling the nucleation of drug molecules. This review aims to highlight the template effect of supramolecular gels in the above-mentioned areas relevant to novel fundamental chemistry, technology, and healthcare.

Poly(vinyl alcohol)-induced thixotropy of an l-carnosine-based cytocompatible, tripeptidic hydrogel

The generally poor mechanical stability of hydrogels limits their use as functional materials for many biomedical applications. In this work, a poly(vinyl alcohol) (PVA) embedded hybrid hydrogel of a β-amino acid-containing Fmoc-protected tripeptide was produced at physiological pH (7.4) and room temperature. The hydrogel system was characterized by a number of techniques, including UV-vis, fluorescence, circular dichroism, FT-IR spectroscopy, electron microscopy, and rheology. While the tripeptide-based pure hydrogel was found to be unstable after ca. half an hour, addition of PVA, a water soluble polymer, increased the temporal and mechanical stability of the hydrogel. A rheological step-strain experiment demonstrates that the peptide-polymer hydrogel is thixotropic. Results from a fluorescence probe study and transmission electron microscopy reveal that addition of PVA increases both the fibre diameter and entanglement. Circular dichroism spectra of the hydrogels confirm the formation of aggregates with supramolecular chirality. The thixotropic nature of the hydrogel has been exploited to entrap and release doxorubicin, an anticancer drug, under physiological conditions. Furthermore, an MTT assay of the Fmoc-tripeptide using AH927 cells confirmed its cytocompatibility, which broadens the utility of the hybrid gel for biomedical applications.

Discrete and Polymeric Self-Assembled Palladium(II) Complexes as Supramolecular Gelators

Supramolecular gels prepared from low-molecular-weight gelators have been extensively explored. However, the exploitation of discrete or polymeric metal complexes as gelators is a relatively recent trend. The synthesis of self-assembled coordination complexes from palladium(II) and selected ligands is well established, but the potential of these complexes as gelators is a less explored treasure. Herein we focus on the gelation abilities of some self-assembled palladium(II) complexes and the resulting unique properties. First, discrete complexes with PdL, PdL₂ , Pd₂ L, Pd₂ L₂ , Pd₂ L₄ , and Pd₃ L₆ compositions are discussed. Second, gelation behavior promoted by coordination-polymer-like gelators formed in situ is explored. These gel samples have been employed in catalysis and the uptake of organic and dye molecules from the solution and gas phases. It is concluded that untapped unique properties can be realized by further exploration of designer palladium(II) complexes.

Investigating the effect of supramolecular gel phase crystallization on gel nucleation

Supramolecular gel phase crystallization offers a new strategy for drug polymorph screening and discovery. In this method, the crystallization outcome depends on the interaction between solute and gel fibre. While supramolecular gels have shown success in producing new polymorphs and crystals with novel morphologies, role of the gel and nature of gel-solute interaction remains largely unexplored. The present study aims to provide a comprehensive picture of the structural evolution of a supramolecular gel produced from a bis(urea) based gelator (G) in the presence of a polymorphic drug carbamazepine (CBZ). The structural aspects of the gel have been assessed by single crystal X-ray analysis, X-ray powder diffraction (XRPD) and solid state NMR spectroscopy. Small Angle Neutron Scattering (SANS) has been used to follow the changes in gel structure in the presence of CBZ. Visual evidence from morphological study and structural evolution observed at a macroscopic level from rheological measurements, shows good agreement with the SANS results. The concentration of the gelator and the relative proportion of G to CBZ were found to be crucial factors in determining the competitive nucleation events involving gelation and crystallization. At a critical G to CBZ ratio the effect of CBZ on gel structure was maximum and fiber bundling in the gel was found to be critically affected. This study offers important information about how the interplay of gelator assembly and gel-solute interactions can fine-tune the nucleation events in a supramolecular gel phase crystallization.

Synthesis and supramolecular self-assembly of glutamic acid-based squaramides

We describe the preparation and characterization of two new unsymmetrical squaramide-based organogelators. The synthesis of the compounds was carried out by subsequent amine condensations starting from dimethyl squarate. The design of the gelators involved a squaramide core connected on one side to a long aliphatic chain and on the other side to a glutamic acid residue. The gelator bearing the free carboxylic groups showed a lower gelation capacity than its precursor diester derivative. Some selected gels were further studied by infrared spectroscopy, rheology and electron microscopy. Critical gelation concentrations and gel-to-sol transition temperatures were also determined for each case. In addition, the superior squaramide diester gelator was compared with an analogue triazole-based gelator in terms of critical gelation concentration, gelation kinetics and thermal phase transition.

A dual pH-responsive supramolecular gelator with aggregation-induced emission properties

Functionalising AIE-active aromatic thioethers with self-complementary zwitterionic binding sites leads to a dual pH-responsive supramolecular organogelator with aggregation-induced emission (AIE) properties. The self-assembled fibrillar gel network is highly fluorescent (λem = 490 nm), whereas the addition of both acid and base leads to the sol state with a loss of emission. More over, the gel was found to be thermo- and mechanoresponsive.

Impact of "half-crown/two carbonyl"-Ca2+ metal ion interactions of a low molecular weight gelator (LMWG) on its fiber to nanosphere morphology transformation with a gel-to-sol phase transition

We report here a smart functional low molecular weight gelator (LMWG) L, containing an unusual metal ion coordination site, i.e. "half-crown/two carbonyl". The gelator L shows excellent gelation behavior with typical fibrillar morphology in acetonitrile, methanol and ethanol media. Upon Ca2+ ion binding with its "half-crown/two carbonyl" coordination site, the acetonitrile gel of L exhibits a fiber to nanosphere morphology transformation along with a gel-to-sol phase transition as confirmed by microscopic investigation and by direct naked eye visualization, respectively. The mechanism involved in this morphology transformation and gel-to-sol phase transition process was studied thoroughly with the help of computational calculations and various spectroscopic experiments and discussed.

Polar Solvent-Induced Unprecedented Supergelation of (Un)Weathered Crude Oils at Room Temperature

Use of carrier solvents to assist dissolution of phase-selective organogelators (PSOGs) before application in oil gelation is a common approach for solution-based gelators. Because of the competition in H-bonds by the polar carrier solvent, decreased gelling ability of PSOGs was often observed. That is, while data are available, the previously documented biphasic minimum gelling concentrations (BMGCs) are much larger than the MGCs determined using heating-cooling cycle for the same PSOG against the same oil. In this study, we show that, by minimizing amount of polar carrier solvent used, the gelling ability of PSOGs actually can be enhanced very substantially, rather than being weakened. More specifically, we demonstrate that use of a minute amount of polar carrier solvents of different types (e.g., ethyl acetate, acetone, acetonitrile, and tetrahydrofuran) significantly enhances the gelling ability of seven structurally different organogelators in hydrophobic oil. In particular, with the use of 5 vol % essentially nontoxic ethyl acetate, application of this previously unexplored strategy onto four monopeptide-based PSOGs produces up to 11-fold improvement in biphasic gelling ability toward seven (un)weathered crude oils of widely ranging viscosities. While collectively overcoming many problematic issues (slow gelling action, low gelling ability, or a need to use hot or toxic solvent for dissolution of gelator) associated with PSOGs, this surprisingly simple yet powerful and reliable method produces unprecedented rapid supergelation of crude oil at room temperature, with BMGCs of as low as 0.38 w/v % (e.g., 3.8 g per liter of crude oil) and an averaged reduction in material cost of gelators by 85-97%.