Assembly Structure Formation in Bulk and Ultrathin Films of Poly(substituted methylene) Having an Azobenzene Side Chain

The density of the side chain introduced to a polymer main chain greatly influences the properties and functions of the polymer. This work first reports on the packing structure and properties at an interface of a poly(substituted methylene) where an azobenzene side chain is introduced at every carbon atom in the main chain (C1PAz). The structure and properties are compared with those of a conventional vinyl polymer [poly(methacrylate)] possessing an identical side-chain structure (C2PAz). The packing structure in the bulk state analyzed by X-ray measurements revealed that C1PAz adopts a highly ordered rectangular unit cell structure, whereas C2PAz shows a less ordered lamellar one. Langmuir film balance experiments indicated that both polymers with the trans-azobenzene give essentially the identical 2D side-chain occupying area on water, which agrees well with the smectic B (hexatic packing) model based on the X-ray data. Upon transfer onto a solid substrate, only C1PAz shows a conformational transformation to a spread bilayer-type layer, most probably due to conformational frustration stemming from the crowding of the side chains. This study proposes new insights into the effects of side-chain density on the self-assembly and photoreaction of azobenzene-containing polymers, which are expected to expand the possibilities of polymer design for various applications.

Stimuli-Responsive Supramolecular Polymers from Amphiphilic Phosphodiester-Linked Azobenzene Trimers

An amphiphilic phosphodiester‐linked azobenzene trimer has been exploited in the development of stimuli‐responsive, water‐soluble supramolecular polymers. The trimer can reversibly undergo thermal and photoisomerization between Z‐ and E‐isomers. Its self‐assembly properties in aqueous medium have been investigated by spectroscopic and microscopic techniques, demonstrating that E‐ and Z‐azobenzene trimers form supramolecular nanosheets and toroidal nanostructures, respectively. By virtue of the E/Z photoisomerization of the azobenzene units, the two different supramolecular morphologies can be switched by photoirradiation. The findings pave a way towards stimuli‐responsive, water‐soluble supramolecular polymers which hold great promise in the development of smart functional materials.

Ionic surfactants as assembly crosslinkers triggered supramolecular membrane with 2D↔3D conversion under multiple stimulus

HYPOTHESIS

General strategies leading to 2D assemblies promise a significant step forward in the development of supramolecular materials with diversity and superiority. Considering molecular packing parameter indicates a connection between molecular geometry and aggregate morphology, we predict the introduction of ionic surfactants as assembly crosslinker would be endowed to develop a methodology of 2D supramolecular assembles.

EXPERIMENTS

In this work, by introducing ionic surfactants such as sodium dodecylsulfate (SDS), the molecular packing parameter P in bolaamphiphile (A2G) system was increased, which successfully manipulated the transformation of the 3D vesicles into 2D membranes. This 2D membranes further showed excellent light and enzyme response, and thus 2D to 3D morphological conversion can be rationally controlled via UV/Vis light irradiation and alternate addition of β-CD and α-amylase. Significantly, the 2D feature revealed not only a remarkable fluorescence enhancement to luminescent molecules but also the ability to effectively remove pollutants from water through filtration.

FINDINGS

We report a general and facile strategy for the construction of 2D supramolecular membranes, initiated by introducing ionic surfactants as assembly crosslinker to increase P. In the existence of stimulus response factors, 2D↔3D morphological conversion can be further controlled in a flexible manner, which opens up a new paradigm leading to interconvertible supramolecular materials.

Molecular photoswitches in aqueous environments

Molecular photoswitches enable dynamic control of processes with high spatiotemporal precision, using light as external stimulus, and hence are ideal tools for different research areas spanning from chemical biology to smart materials. Photoswitches are typically organic molecules that feature extended aromatic systems to make them responsive to (visible) light. However, this renders them inherently lipophilic, while water-solubility is of crucial importance to apply photoswitchable organic molecules in biological systems, like in the rapidly emerging field of photopharmacology. Several strategies for solubilizing organic molecules in water are known, but there are not yet clear rules for applying them to photoswitchable molecules. Importantly, rendering photoswitches water-soluble has a serious impact on both their photophysical and biological properties, which must be taken into consideration when designing new systems. Altogether, these aspects pose considerable challenges for successfully applying molecular photoswitches in aqueous systems, and in particular in biologically relevant media. In this review, we focus on fully water-soluble photoswitches, such as those used in biological environments, in both in vitro and in vivo studies. We discuss the design principles and prospects for water-soluble photoswitches to inspire and enable their future applications.

Design and synthesis of an azobenzene-betaine surfactant for photo-rheological fluids

HYPOTHESIS

Morphology of surfactant self-assemblies are governed by the intermolecular interactions and packing constraints of the constituent molecules. Therefore, rational design of surfactant structure should allow targeting of the specific self-assembly modes, such as wormlike micelles (WLMs). By inclusion of an appropriate photo-responsive functionality to a surfactant molecule, light-based control of formulation properties without the need for additives can be achieved.

EXPERIMENTS

A novel azobenzene-containing surfactant was synthesised with the intention of producing photo-responsive wormlike micelles. Aggregation of the molecule in its cis and trans isomers, and its concomitant flow properties, were characterised using UV-vis spectroscopy, small-angle neutron scattering, and rheological measurements. Finally, the fluids capacity for mediating particle diffusion was assessed using dynamic light scattering.

FINDINGS

The trans isomer of the novel azo-surfactant was found to form a viscoelastic WLM network, which transitioned to inviscid ellipsoidal aggregates upon photo-switching to the cis isomer. This was accompanied by changes in zero-shear viscosity up to 16,000×. UV-vis spectroscopic and rheo-SANS analysis revealed π-π interactions of the trans azobenzene chromophore within the micelles, influencing aggregate structure and contributing to micellar rigidity. Particles dispersed in a 1 wt% surfactant solution showed a fivefold increase in apparent diffusion coefficient after UV-irradiation of the mixture.

Photoliquefiable DNA-surfactant ionic crystals: Anhydrous self-healing biomaterials at room temperature

Development of photoliquefiable solid-state biomaterials at room temperature would address scientific challenges in life science. However, external stimuli-induced phase transitions are difficult for some biomacromolecules based materials, due to the high rigidity of these biomolecules. In this present work, by delicate molecule design on azobenzene-type ammonium surfactants, two new types of DNA-surfactant materials are fabricated. At room temperature, these DNA materials show photoliquefaction of ionic crystals to isotropic liquids under UV light, and fast self-assembly from isotropic liquids back to crystals after ceasing UV light, under the assistance of azobenzene isomerization. To achieve this objective, the designed solid-state DNA materials should have melting points near room temperature and an immediate liquid crystal to isotropic liquid transition process just above the melting points, which highly depends on the stoichiometric charge ratio between DNA and surfactants. As proved by the successful self-healing tests, these DNA ionic crystals are good biomaterials with potential applications in biomedicine and life science. This work would provide a new strategy for designing anhydrous functional biomaterials at room temperature by using rigid biomacromolecules. STATEMENT OF SIGNIFICANCE: At room temperature, solid-state biomaterials with photoregulated crystal⇄isotropic liquid phase transition property are attractive functional materials in life science, considering the body temperature and living environment temperature of human beings. Although several kinds of anhydrous materials achieved isothermal photoresponsive phase transitions, the photoregulated phase transition of anhydrous biomacromolecules based materials has not been achieved at room temperature, due to the high rigidity of these biomolecules. In this work, by delicate molecule design on ammonium surfactants, we synthesized two kinds of anhydrous DNA-surfactants ionic crystals. These DNA materials show fast photoliquefaction under UV light and self-assembly after ceasing light, which affords excellent self-healing biomaterials. This work would provide a new strategy for designing anhydrous photoresponsive biomaterials by using rigid biomacromolecules.

Activation of Sirtuin 2 Inhibitors Employing Photoswitchable Geometry and Aqueous Solubility

Because isoenzymes of the experimentally and therapeutically extremely relevant sirtuin family show high similarity, addressing the unique selectivity pocket of sirtuin 2 is a promising strategy towards selective inhibitors. An unrelated approach towards selective inhibition of isoenzymes with varied tissue distribution is targeted drug delivery or spatiotemporal activation by photochemical activation. Azologization of two nicotinamide‐mimicking lead structures was undertaken to combine both approaches and yielded a set of 33 azobenzenes and azopyridines that have been evaluated for their photochemical behaviour and bioactivity. For some compounds, inhibitory activity reached the sub‐micromolar range in their thermodynamically favoured E form and could be decreased by photoisomerization to the metastable Z form. Besides, derivatization with long‐chain fatty acids yielded potent sirtuin 2 inhibitors, featuring another intriguing aspect of azo‐based photoswitches. In these compounds, switching to the Z isomer increased aqueous solubility and thereby enhanced biological activity by up to a factor of 21. The biological activity of two compounds was confirmed by hyperacetylation of sirtuin specific histone proteins in a cell‐based activity assay.

Switchable Solubility of Azobenzene-Based Bolaamphiphiles

The ability to design amphiphiles with predictable solubility properties is of everlasting interest in supramolecular chemistry. Relevant structural parameters include the hydrophobic-hydrophilic balance and structural flexibility. In this work, we investigate the water solubility of azobenzene-based triglycerol bolaamphiphiles (TGBAs). In particular, we analyzed the structural effects of backbone hydrophobicity, flexibility, and cis/trans isomerization on the water solubility of a subset of five TGBAs. This leads to the first example of a non-ionic bolaamphiphile whose water solubility can be changed by irradiation with light. The underlying kinetics were monitored using liquid chromatography and a closer analysis of the underlying aggregation processes provides a mechanistic understanding of the light-driven dissolution process. We anticipate that the results obtained will help to engineer bolaamphiphiles with predictable solution properties in the future.

Liquid crystalline microspheres of azobenzene amphiphiles formed by thermally induced pH changes in binary water-hydrolytic ionic liquid media

Anionic azobenzene-containing bilayered membranes dispersed in binary water-ionic liquid (IL) media undergo proton-responsive transformation into liquid crystalline microspheres (LCMs). This transformation was induced by protons released by the heat-induced hydrolysis of tetrafluoroborate ions in the ILs. This work demonstrates the first beneficial use of hydrolysis-susceptible ILs in chemistry.

Cyclodextrin-/photoisomerization-modulated assembly and disassembly of an azobenzene-grafted polyoxometalate cluster

Herein, a mono-lacunary Keggin-type polyoxometalate (POM), [SiW11O39]8-, grafted with an azobenzene group through Sn ion bridging was prepared, and the formed organic-inorganic hybrid cluster was characterized via elemental analysis, NMR, TGA, and IR techniques. A vesicular structure of the hybrid cluster assembly in aqueous media was observed in the TEM image, and it dissociated in the presence of α-/β-, γ-cyclodextrins (α-/β-, γ-CDs); this dissociation was driven by the host-guest interactions. The monodispersed inclusion complex further reassembled into smaller micelles under irradiation with 365 nm light, and this transformation was reversibly controlled by alternating the irradiation with 450 nm light. Moreover, in the case of the POM-Azo/β-CD system, reassembly from the monodispersed state to the vesicular state was achieved by the addition of a competitive guest molecule. Thus, the reversible host-guest interactions combining reversible photoisomerization of the azobenzene group provided multiple ways to modulate the assembly and disassembly of the POM hybrid as well as the changes between different assemblies. The present study inspires the potential use of these kind of hybrid POMs in enhanced catalytic reactions and recycling.

Self-Assembly-Triggered Cis-to-Trans Conversion of Azobenzene Compounds

Cis-to-trans transition of azobenzene compounds usually occurs under appropriate light irradiation or slow thermal relaxation, and one can hardly obtain complete cis-to-trans transition of azos due to the overlap of the n-π* transition of the trans and the cis isomers. We show that by viewing the photostationary state as a chemical equilibrium between the cis and trans isomers, triggered self-assembly of the trans isomers can promote the cis-to-trans transition, and trans azos with spectrum-grade purity can even be achieved using an elegantly designed coordinating azo. This work establishes a new paradigm for manipulating the cis-to-trans transition of azo compounds, which may inspire designs for various azo-based advanced materials.

First Examples of de Vries-like Smectic A to Smectic C Phase Transitions in Ionic Liquid Crystals

In ionic liquid crystals, the orthogonal smectic A phase is the most common phase whereas the tilted smectic C phase is rather rare. We present a new study with five novel ionic liquid crystals exhibiting both a smectic A as well as the rare smectic C phase. Two of them have a phenylpyrimidine core whereas the other three are imidazolium azobenzenes. Their phase sequences and tilt angles were studied by polarizing microscopy and their temperature-dependent layer spacing as well as their translational and orientational order parameters were studied by X-ray diffraction. The X-ray tilt angles derived from X-ray studies of the layer contraction and the optically measured tilt angles of the five ionic liquid crystals were compared to obtain their de Vries character. Four of our five mesogens turned out to show de Vries-like behavior with a layer shrinkage that is far less than that expected for conventional materials. These materials can thus be considered as the first de Vries-type materials among ionic liquid crystals.

Photon Upconversion and Molecular Solar Energy Storage by Maximizing the Potential of Molecular Self-Assembly

The self-assembly of functional molecules into ordered molecular assemblies and the fulfillment of potentials unique to their nanotomesoscopic structures have been one of the central challenges in chemistry. This Feature Article provides an overview of recent progress in the field of molecular self-assembly with the focus on the triplet-triplet annihilation-based photon upconversion (TTA-UC) and supramolecular storage of photon energy. On the basis of the integration of molecular self-assembly and photon energy harvesting, triplet energy migration-based TTA-UC has been achieved in varied molecular systems. Interestingly, some molecular self-assemblies dispersed in solution or organogels revealed oxygen barrier properties, which allowed TTA-UC even under aerated conditions. The elements of molecular self-assembly were also introduced to the field of molecular solar thermal fuel, where reversible photoliquefaction of ionic crystals to ionic liquids was found to double the molecular storage capacity with the simultaneous pursuit of switching ionic conductivity. A future prospect in terms of innovating molecular self-assembly toward molecular systems chemistry is also discussed.

Nonphospholipid fluid liposomes with switchable photocontrolled release

We created novel nonphospholipid photosensitive liposomes from a mixture of a monoacylated azobenzene amphiphile (AzoC10N(+)) and cholesterol sulfate (Schol). This system belongs to the family of sterol-enriched nonphospholipid liposomes that were shown to form stable large unilamellar vesicles (LUVs) with enhanced impermeability. Fluid bilayers were successfully prepared from AzoC10N(+)/Schol (25/75 molar ratio) mixtures, and LUVs could be derived at room temperature using standard extrusion methods. The isomerization process of the bilayer-inserted AzoC10N(+) was characterized. Leakage from these liposomes could be induced by the photoconversion of AzoC10N(+) from its trans form to its cis form. This photocontrolled release from fluid liposomes contrasts with the case of phospholipid-based azo-containing liposomes, which are generally required to be in the gel phase to be photosensitive. It is proposed that the very high degree of conformational order of the monoalkylated amphiphile and the tight packing of the hydrophobic core of the AzoC10N(+)/Schol liposomes make them responsive to the presence of the bulky cis azo isomer. Interestingly, the liposome impermeability could be fully restored by the photoisomerization of the cis form back to the trans form, providing a sharp on-and-off control of payload release. In addition, these nonphospholipid liposomes display a very limited passive release. Therefore, it is shown that AzoC10N(+)/Schol LUVs can be used as nanocontainers, whose content can be released by light in a controlled and switchable manner.

Self-assembly of azobenzene bilayer membranes in binary ionic liquid-water nanostructured media

Anionic azobenzene-containing amphiphile 1 (sodium 4-[4-(N-methyl-N-dodecylamino)phenylazo]benzenesulfonate) forms ordered bilayer membranes in binary ionic liquid (1-ethyl-3-methylimidazolium ethyl sulfate, [C2mim][C2OSO3])-water mixtures. The binary [C2mim][C2OSO3]-water mixture is macroscopically homogeneous at any mixing ratio; however, it possesses fluctuating nanodomains of [C2mim][C2OSO3] molecules as observed by dynamic light scattering (DLS). These nanodomains show reversible heat-induced mixing behavior with water. Although the amphiphile 1 is substantially insoluble in pure water, it is dispersible in the [C2mim][C2OSO3]-water mixtures. The concentration of [C2mim][C2OSO3] and temperature exert significant influences on the self-assembling characteristics of 1 in the binary media, as shown by DLS, transmission electron microscopy (TEM), UV-vis spectroscopy, and zeta-potential measurements. Bilayer membranes with rod- or dotlike nanostructures were formed at a lower content of [C2mim][C2OSO3] (2-30 v/v %), in which azobenzene chromophores adopt parallel molecular orientation regardless of temperature. In contrast, when the content of [C2mim][C2OSO3] is increased above 60 v/v %, azobenzene bilayers showed thermally reversible gel-to-liquid crystalline phase transition. The self-assembly of azobenzene amphiphiles is tunable depending on the volume fraction of [C2mim][C2OSO3] and temperature, which are associated with the solvation by nanoclusters in the binary [C2mim][C2OSO3]-water media. These observations clearly indicate that mixtures of water-soluble ionic liquids and water provide unique and valiant environments for ordered molecular self-assembly.

Chiral self-assembly of designed amphiphiles: influences on aggregate morphology

A series of novel amphiphiles were designed for self-assembly into chiral morphologies, the amphiphiles consisting of a glutamic acid (Glu) headgroup connected through an 11-carbon alkoxy chain to a diphenyldiazenyl (Azo) group and terminated with a variable length alkyl chain (R-Azo-11-Glu, where R denotes the number of carbons in the distal chain). TEM imaging of amphiphile aggregates self-assembled from heated, methanolic, aqueous solution showed that chiral order, expressed as twisted ribbons, helical ribbons, and helically based nanotubes, increased progressively up to a distal chain length containing eight carbons, and then decreased with further increases in distal chain length. TEM and CD showed that the chiral aggregations of single enantiomers were influenced by the molecular chirality of the headgroup. However, the assembly of D,L-10-Azo-11-Glu into nanotubes demonstrated that chiral symmetry breaking effected by the azo group was also relevant to the chiral organization of the amphiphiles. The chiral order of aggregate morphologies was additionally affected by the temperature and solvent composition of assembly in a manner correlated to the mechanism driving assembly; i.e., D,L-10-Azo-11-Glu was sensitive to the temperature of assembly but less so to solvent composition, while L-14-Azo-11-Glu was sensitive to solvent composition and not to temperature. FTIR and UV-vis spectroscopic investigations into the organization of the head and azo groups, in chiral and achiral structures, illustrated that a balance of the influences of the hydrophilic and hydrophobic components on self-assembly was required for the optimization of the chiral organization of the self-assembled structures.

CIRCULAR ARRANGEMENT OF AZOBENZENE CHROMOPHORES IN THE NUCLEOAMPHIPHILE MONOLAYER BY BASE-PAIRING WITH CYCLIC DNA

In order to construct chromophores arrays that precisely controlled their arrangement, monolayers of an azobenzene bearing nucleoamphiphile were prepared on various oligoDNA solutions. Monolayers of the amphiphilic adenine derivative bearing an azobenzene moiety ( C 12 AzoC 5 Ade ) were prepared on thymidylic acid tetramer (dT4) and octamer (dT8) solutions, and UV-vis reflection absorption spectra of the monolayers were measured to investigate aggregation structures of the azobenzene. The absorption maximum of the monolayer was blue-shifted on the dT4 solution and red-shifted on the dT8 solution. It shows that azobenzene groups in the monolayer have parallel orientation (H aggregate) on the dT4 solution. Though, azobenzene groups have head-to-tail orientation (J aggregates) on the dT8 solution. When monolayers of C 12 AzoC 5 Ade were prepared on the synthesized cyclic oligonucleotides, the absorption spectra were totally different from those of the corresponding linear oligonucleotides.

Photochemical control of molecular assembly formation in a catanionic surfactant system

Photochemical control of vesicle disintegration and reformation in aqueous solution was examined using a mixture of 4-butylazobenzene-4'-(oxyethyl)trimethylammonium bromide (AZTMA) as the photoresponsive cationic surfactant and sodium dodecylbenzenesulfonate (SDBS) as the anionic surfactant. Spontaneous vesicle formation was found in a wide-ranging composition of the trans-AZTMA/SDBS system. AZTMA molecules constituting vesicles underwent reversible trans-cis photoisomerization when irradiated with ultraviolet and visible light. Transmission electron microscopy observations using the freeze-fracture technique (FF-TEM) showed that UV light irradiation caused the vesicles to disintegrate into coarse aggregates and visible light irradiation stimulated the reformation of vesicles (normal control). A detailed investigation of the phase state and the effects of UV and visible light irradiation on the AZTMA/SDBS system with the use of electroconductivity, dynamic/static light scattering, and surface tension measurements and FF-TEM observations revealed that in the AZTMA-rich composition (AZTMA/SDBS 9:1) a micellar solution before light irradiation became a vesicular solution after UV light irradiation and visible light irradiation allowed the return to a micellar solution (reverse control). Thus, we could photochemically control the disintegration (normal control) and reformation (reverse control) of vesicles in the same system.

Sequence-specific control of azobenzene assemblies by molecular recognition of DNA

We investigated the molecular recognition between the amphiphile AzoAde, which is composed of azobenzene in the hydrophobic and adenine in the hydrophilic portion of the molecule, and oligonucleotides having a homogeneous base (dA30, dT30, dG30, and dC30) at the air-water interface. On the basis of the complementary base-pairing of DNA in the duplex, orderly arrangement of AzoAde on templated dT30 was examined using pi-A isotherm, UV-vis RAS, FT-IR RAS, and XPS measurements. Although there was little interaction between AzoAde and mismatched oligonucleotides (dA30, dG30, and dC30), AzoAde prepared on a dT30 subphase stoichiometrically assembled and interacted with dT30, subsequently forming a J-form assembly at the air-water interface. AFM observation of the LB films revealed the nanostructure of the J-formed AzoAde monolayer on the dT30 subphase as well as the domain structures of the H-formed monolayers on the other oligonucleotide subphases. Therefore, dT30 has a potential application as a template for assembling AzoAde at the air-water interface.

Monolayer behavior of a pyridyl head-group-containing amphiphile and its miscibility with poly(d,l-lactide-co-glycolide) on different pH subphase

In this paper, we investigated the Langmuir film and Langmuir-Blodgett (LB) monolayer film of a nonionic amphiphilic molecule, 4-(6-p-pyridyloxyl)hexyloxyl-4'-dodecyloxylazobenzene (C(12)AzoC(6)Py) and its mixture with poly(D,L-lactide-co-glycolide) (PLG) at different subphase pH values (2.0, 2.6, 3.3, 4.4, and 6.5, respectively) by surface pressure-area (pi-A) isotherms, in situ interface Brewster angle microscopy (BAM), and ex situ atomic force microscopy (AFM). For pure C(12)AzoC(6)Py, its pi-A isotherms display a plateau when the subphase pH value is lower than 3.0. The pressure of the plateau increases with the decrease of pH until 2.0. Over the plateau, the pi-A isotherms become almost identical to the one under neutral conditions. The appearance of such a plateau can be explained as the coexistence of protonation and unprotonation of pyridyl head groups of the employed amphiphile. In contrast to the homogeneous surface morphology of pure C(12)AzoC(6)Py near the plateau by BAM observation, the surface in the case of its mixing with PLG exhibits a dendritic crystalline state under low surface pressure at subphase pH lower than 3.0. The crystalline state becomes soft and gradually melts into homogeneous aggregates with surface pressure increasing to a higher value than that of the plateau. Meanwhile, the hydrolysis of PLG in the mixture system at the interface has been affirmed to be restrained to a very large extent. And the PLG was believed to be compelled to the up layer of the LB film due to the phase separation, which is examined by AFM. Based on the experimental results, the corresponding discussion was also performed.

Toward Efficient Photomodulation of Conjugated Polymer Emission: Optimizing Differential Energy Transfer in Azobenzene-Substituted PPV Derivatives

We present fluorescence studies of quenching behavior in photoaddressable azobenzene-substituted derivatives of the fluorescent conjugated polymer poly(p-phenylenevinylene) (PPV). The azobenzene side chains partially quench the PPV fluorescence, and we have shown previously that the quenching efficiency is greater when the azobenzene side chains are cis than when they are trans. This effect provides a photoaddressable means of modulating the fluorescence intensity of PPV derivatives. To optimize the efficiency of photoinduced intensity modulation, it is important to understand the molecular nature of quenching by both trans- and cis-azobenzene side chains. Here we investigate the photophysical origins of quenching by the two isomers using steady-state and time-resolved fluorescence spectroscopy. We present results from the azobenzene-modified PPV derivative poly(2-methoxy-5-((10-(4-(phenylazo)phenoxy)decyl)oxy)-1,4-phenylenevinylene) (MPA-10-PPV) and two new related polymers, a copolymer lacking half of the azobenzene side chains and an analogue of MPA-10-PPV with a tert-butyl-substituted azobenzene. These studies reveal that steric interactions influence the extent of PPV emission quenching by trans-azobenzene but do not affect the efficient quenching by cis-azobenzene. The difference in dynamic quenching efficiencies between trans- and cis-azobenzene isomers is consistent with fluorescence resonance energy transfer. These results show that it is possible to control the efficiency of photoswitchable fluorescence modulation through specific structural variations designed to encourage or block quenching by trans-azobenzene. This is a promising approach to providing useful general guidelines for designing photomodulated PPV derivatives.