Understanding the properties of aerobic sludge granules as hydrogels

Variation of viscoelastic properties of extracellular polymeric substances and their relation to anaerobic granule's mechanical strength in full-scale treatment plants

Extracellular polymeric substances (EPS) are considered to play a pivotal role in shaping granules' physical properties. In this contribution, we characterized the viscoelastic properties of EPS from granules of 9 full-scale industrial anaerobic reactors; and quantitatively investigated whether these properties correlate with granules' resistance to compression (Egranule) and shear strength (Sgranule). Most granules with a higher shear strength, also exhibited a stronger resistance to compression (r = 0.96, p = 0.002), except those granules that contained relatively more proteins in their EPS. Interestingly, these granules were also the most resistant to shear stress (Sgranule ≥ 110 ± 40 h). Furthermore, the EPS hydrogels of these granules had slower softening rates (κ < 0.9) compared to the others (κ ranged between 0.95 and 1.20), indicating stronger gels were formed. These findings suggest that the EPS hydrogel softening rate could be a key parameter to explain granule's shear strength.

A typical acidic extracellular polysaccharide alludes to algae-bacteria-collaboration in microalgal-bacterial symbiosis

Microalgal-bacterial symbioses are prevalent in aquatic ecosystems and play a pivotal role in carbon sequestration, significantly contributing to global carbon cycling. The understanding of the contribution of exopolysaccharides (EPSs), a crucial carbon-based component, to the structural integrity of microalgal-bacterial symbioses remains insufficiently elucidated. To address this gap, our study aims to enhance our comprehension of the composition and primary structure of EPSs within a specific type of granular microalgal-bacterial symbiosis named microalgal-bacterial granular sludge (MBGS). Our investigation reveals that the acidic EPSs characteristic of this symbiosis have molecular weights ranging from several hundred thousand to over one million Daltons, including components like glucopyranose, galactopyranose, mannose, and rhamnose. Our elucidation of the backbone linkage of a representative exopolysaccharide revealed a →3)-β-D-Galp-(1→4)-β-D-Glcp-(1→ glycosidic linkage. This linear structure closely resembles bacterial xanthan, while the branched chain structure bears similarities to algal EPSs. Our findings highlight the collaborative synthesis of acidic EPSs by both microalgae and bacteria, emphasizing their joint contribution in the production of macromolecules within microalgal-bacterial symbiosis. This collaborative synthesis underscores the intricate molecular interactions contributing to the stability and function of these symbiotic relationships.

Modelling biofilm development: The importance of considering the link between EPS distribution, detachment mechanisms and physical properties

In industry, treatments against biofilms need to be optimized and, in the wastewater treatment field, biofilm composition needs to be controlled. Therefore, describing the biochemical and physical structures of biofilms is now required to better understand the influence of operating parameters and treatment on biofilms. The present study aims to investigate how growth conditions influence EPS composition, biofilm physical properties and volume detachment using a 1D biofilm model. Two types of EPS are considered in the present model, proteins and polysaccharides. The main hypotheses are that: (i) the production of polysaccharides occurs mainly under strong nutrient limitation(s) while the production of proteins is coupled to both the substrate uptake rate and the lysis process; (ii) the local biofilm porosity depends on the local biofilm composition. Both volume and surface detachment occur in biofilms and volume detachment extent depends on the biofilm local cohesion and thus on the local composition of biofilms for a given shear stress. The model is based on experimental trends and aims to represent these observations on the basis of biochemical and physical processes. Four case studies covering a wide range of contrasting growth conditions such as different COD/N ratios, applied SOLR and shear stresses are investigated. The model predicts how the biochemical and physical biofilm structures change as a result of contrasting growth conditions. More precisely simulation results are in good agreement with the main experimental observations reported in the literature, such as: (i) a strong nitrogen limitation of growth induces an important accumulation of polysaccharides leading to a more porous and homogenous biofilm, (ii) a high applied surface organic loading load allows to obtain a high biofilm thickness, (iii) a strong shear stress applied during the biofilm growth leads to a reduction of the biofilm thickness and to a consolidation of the biofilm structure. Overall, this model represents a relevant decision tool for the selection of appropriate enzymatic treatments in the context of negative biofilm control. From our results, it appears that protease based treatments should be more appropriate for biofilms developed under low COD/N ratios (about 20 gCOD/gN) whereas both glucosidases and proteases based treatments should be more appropriate for biofilms developed under high COD/N ratio (about 70 gCOD/gN). In addition, the model could be useful for other applications such as resource recovery in biofilms or granules, and help to better understand biological membrane fouling.

Rethinking the relationships between gel like structure and sludge dewaterability based on a binary gel like structure model: Implications for the online sensing of dewaterability

The digital transformation of sludge treatment processes requires online sensing of dewaterability. This topic has been attempted for many years based on macroscopic shear rheology. However, the relationship between rheological behavior and dewaterability remains noncommittal, and the reason is unclear. Herein, a binary gel-like structure model was proposed including the interactions network at the supra-flocs level and the gel-like structure at the flocs level. Multiple advanced techniques including optical tweezers were employed to precisely understand the binary gel-like structure and to classify the correlation mechanism between this gel-like structure, rheological behavior, and dewaterability. The analysis of sludge from eight wastewater treatment plants showed the binary gel-like structures at both supra-flocs and flocs levels have significant relationships with sludge dewaterability (p < 0.05). Further deconstruction of the sludge viscoelastic behavior illustrated that the gel-like structure at the supra-flocs level dominates the rheological behavior of sludge. Moreover, the direct description of the binary gel-like structure in four typical sludge treatment processes highlighted the importance of the flocs level's structure in determining the dewaterability. Overall, this study revealed that shear rheology may prefer to stress the interactions network at the supra-flocs level but mask the flocs level's structure, although the latter is important. This observation may provide a general guideline for the design of robust sensors for dewaterability.

Top-down and bottom-up microbiome engineering approaches to enable biomanufacturing from waste biomass

Growing environmental concerns and the need to adopt a circular economy have highlighted the importance of waste valorization for resource recovery. Microbial consortia-enabled biotechnologies have made significant developments in the biomanufacturing of valuable resources from waste biomass that serve as suitable alternatives to petrochemical-derived products. These microbial consortia-based processes are designed following a top-down or bottom-up engineering approach. The top-down approach is a classical method that uses environmental variables to selectively steer an existing microbial consortium to achieve a target function. While high-throughput sequencing has enabled microbial community characterization, the major challenge is to disentangle complex microbial interactions and manipulate the structure and function accordingly. The bottom-up approach uses prior knowledge of the metabolic pathway and possible interactions among consortium partners to design and engineer synthetic microbial consortia. This strategy offers some control over the composition and function of the consortium for targeted bioprocesses, but challenges remain in optimal assembly methods and long-term stability. In this review, we present the recent advancements, challenges, and opportunities for further improvement using top-down and bottom-up approaches for microbiome engineering. As the bottom-up approach is relatively a new concept for waste valorization, this review explores the assembly and design of synthetic microbial consortia, ecological engineering principles to optimize microbial consortia, and metabolic engineering approaches for efficient conversion. Integration of top-down and bottom-up approaches along with developments in metabolic modeling to predict and optimize consortia function are also highlighted.

ONE-SENTENCE SUMMARY

This review highlights the microbial consortia-driven waste valorization for biomanufacturing through top-down and bottom-up design approaches and describes strategies, tools, and unexplored opportunities to optimize the design and stability of such consortia.

Insights into the life-cycle of aerobic granular sludge in a continuous flow membrane bioreactor by tracing its heterogeneous properties at different stages

This work gave insights into the life-cycle of aerobic granular sludge (AGS) by tracing its heterogeneity in the basic properties at different stages in a closed system (a continuous flow membrane bioreactor, MBR), including physical and chemical characteristics and microbial communities. The results indicate that the entire life-cycle consists of the following four stages, namely, the initial, growing, mature and cleaved stages, where multiple AGS properties synergistically affect the rheological properties of the AGS over its life-cycle. The storage modulus (G') of AGS reached its maximum value at the mature stage, whose value was significantly and positively correlated with the protein (PN) in extracellular polymeric substances (EPS) and granule size, specifically the peak area of granule size distribution, but this value was strongly and negatively correlated with the roughness. The AGS at the mature stage would be more vulnerable to be destroyed than that at other stages under the condition of higher shear strain, such as γ = 50%, which was associated with larger granule size and fewer polysaccharide (PS)-related functional groups (especially in the soluble microbial products (SMPs) in the outermost layer of AGS), and the decrease in PS was correlated with a higher relative abundance of Chloroflexi. Additionally, the value of shear strain that AGS was subjected to had a good linear correlation (R2=0.993) with the Young's modulus, which indicated the ability of AGS to resist deformation improved with increasing values of shear strain.

Non-filamentous sludge bulking induced by exopolysaccharide variation in structure and properties during aerobic granulation

The forming mechanism of non-filamentous sludge bulking during aerobic granulation were investigated basing on three feeding strategies (R1 direct aeration after fast feeding, R2 anaerobic stirring after fast feeding and R3 anaerobic plug-flow slow feeding). Results showed that strong selection stress (shortening settling time) led to a sharp flocs washout and the subsequent increase of food to microorganisms (F/M) in R1 and R3 reactors, but not found in R2 due to the different strategies of feeding modes. With the increase of F/M, zeta potential and hydrophobicity of sludge surfaces significantly decreased and thus leading to an enhanced repulsive force and energy barriers for sludge aggregation. Particularly, when F/M exceeded 1.2 kgCOD/(kgMLSS·d), non-filamentous sludge bulking was ultimately triggered in R1 and R3. Further analysis showed that massive extracellular exopolysaccharide (PS) accumulated on the surfaces of non-filamentous bulking sludge due to the increased abundance of the microorganisms related to PS secretion during sludge bulking. In addition, significantly increased intracellular second messenger (c-di-GMP), a key substance regulating PS biosynthesis, was confirmed via its concentration determination as well as microbial function prediction analysis, which played a critical role in sludge bulking. Combing with the systematic detection from surface plasmon resonance system, rheometer and size-exclusion chromatography-multiangle laser light detection-refractive index system, higher molecular weight, compact conformation, higher viscosity and higher hydrophilicity was determined in sludge bulking PS relative to PS extracted from non-filamentous bulking sludge. Clearly, the changes of PS (content, structures and properties) driven by c-di-GMP are the dominant mechanism for the formation of non-filamentous sludge bulking during aerobic granulation. This work could provide theoretical support for successful start-up and application of aerobic granular sludge technology.

Celebrating 50 years of microbial granulation technologies: From canonical wastewater management to bio-product recovery

Microbial granulation technologies (MGT) in wastewater management are widely practised for more than fifty years. MGT can be considered a fine example of human innovativeness-driven nature wherein the manmade forces applied during operational controls in the biological process of wastewater treatment drive the microbial communities to modify their biofilms into granules. Mankind, over the past half a century, has been refining the knowledge of triggering biofilm into granules with some definite success. This review captures the journey of MGT from inception to maturation providing meaningful insights into the process development of MGT-based wastewater management. The full-scale application of MGT-based wastewater management is discussed with an understanding of functional microbial interactions within the granule. The molecular mechanism of granulation through the secretion of extracellular polymeric substances (EPS) and signal molecules is also highlighted in detail. The recent research interest in the recovery of useful bioproducts from the granular EPS is also emphasized.

Density measurements of aerobic granular sludge

Granular sludge processes are frequently used in domestic and industrial wastewater treatment. The granule buoyant density and biomass density are important parameters for the design and operation of granular sludge reactors. Different methods to measure the granule density include the pycnometer method, the Percoll density gradient method, the dextran blue method, and the settling velocity method. In this study, a comparison was made between these four methods to measure granule density for granules from a full-scale granular sludge plant treating domestic sewage. The effect of salinity on granule density was assessed as well. Three out of the four evaluated methods yielded comparable results, with granule buoyant densities between 1025.7 and 1028.1 kg/m³ and granule biomass densities between 71.1 and 71.5 g/L (based on volatile suspended solids (VSS)). The settling velocity method clearly underestimated the granule density, due to the complex relation between granule properties and settling velocity. The pycnometer method was the most precise method, but it was also quite susceptible to bias. The granule buoyant density increased proportionally with salinity, to 1049.2 kg/m³ at 36 g/L salinity. However, the granule biomass density, based on VSS, remained constant. This showed that the granule volume was not affected by salinity and that the buoyant density increase was the result of diffusion of salts into the granule pores. Overall, the granule density can be measured reliably with most methods, as long as the effect of salinity is considered. The results are discussed in light of operational aspects for full-scale granular sludge plants.

Integrated resource recovery from aerobic granular sludge plants

The study evaluated the combined phosphorus, nitrogen, methane, and extracellular polymeric substances (EPS) recovery from aerobic granular sludge (AGS) wastewater treatment plants. About 30% of sludge organics are recovered as EPS and 25-30% as methane (≈260 ml methane/g VS) by integrating alkaline anaerobic digestion (AD). It was shown that 20% of excess sludge total phosphorus (TP) ends in the EPS. Further, 20-30% ends in an acidic liquid waste stream (≈600 mg PO₄-P/L), and 15% in the AD centrate (≈800 mg PO₄-P/L) as ortho-phosphates in both streams and is recoverable via chemical precipitation. 30% of sludge total nitrogen (TN) is recovered as organic nitrogen in the EPS. Ammonium recovery from the alkaline high-temperature liquid stream is attractive, but it is not feasible for existing large-scale technologies because of low ammonium concentration. However, ammonium concentration in the AD centrate was calculated to be 2600 mg NH₄-N/L and ≈20% of TN, making it feasible for recovery. The methodology used in this study consisted of three main steps. The first step was to develop a laboratory protocol mimicking demonstration-scale EPS extraction conditions. The second step was to establish mass balances over the EPS extraction process on laboratory and demonstration scales within a full-scale AGS WWTP. Finally, the feasibility of resource recovery was evaluated based on concentrations, loads, and integration of existing technologies for resource recovery.

Recovery of structural extracellular polymeric substances (sEPS) from aerobic granular sludge: Insights on biopolymers characterization and hydrogel properties for potential applications

Nowadays, wastewater treatment plants (WWTPs) are transforming into water resource recovery facilities (WRRFs) where the resource recovery from waste streams is pivotal. Aerobic granular sludge (AGS) is a novel technology applied for wastewater treatment. Extracellular polymeric substances (EPS) secreted by microorganisms promote the aggregation of bacterial cells into AGS and the structural fraction of EPS (sEPS) is responsible for the mechanical properties of AGS. sEPS can be extracted and recovered from waste AGS by physico-chemical methods and its characterization is to date of relevant concern to understand the properties in the perspective of potential applications. This study reports on: characterization of sEPS extracted and recovered from AGS; - formation and characterization of sEPS-based hydrogels. Briefly, sEPS were extracted by a thermo-alkaline process followed by an acidic precipitation. sEPS-based hydrogels were formed by a cross-linking process with a 2.5% w/w CaCl₂ solution. The following key-findings can be drawn: i) hydrogels can be formed starting from 1% w/w sEPS on, by diffusion of Ca²⁺ into sEPS network; ii) the Ca/C molar ratio of hydrogels decreased with increasing concentration of sEPS from 1 to 10% w/w; iii) the thermogravimetric and spectroscopic behaviours of sEPS show that the cross-linking reaction mainly involves the polysaccharidic fraction of biopolymers; iv) water-holding capacity up to 99 gH₂O/g_sEPS was registered for 1% w/w sEPS-based hydrogels, suggesting applications in several industrial sectors (i.e. chemical, paper, textile, agronomic, etc.); v) rheological results highlighted a solid-like behaviour (G'≫G") of sEPS-based hydrogels. The power-law fitting of G' vs. sEPS concentration suggests that the expansion of the sEPS network during cross-linking occurs through a percolative mechanism involving the initial formation of sEPS oligomers clusters followed by their interconnection towards the formation of 3D network. These findings provide additional information about the mechanisms of sEPS-based hydrogel formation and reveal the peculiar physico-chemical characteristics of sEPS which nowadays are increasingly gaining interest in the context of resource recovery.

Tailoring polyvinyl alcohol-sodium alginate (PVA-SA) hydrogel beads by controlling crosslinking pH and time

Hydrogel-encapsulated catalysts are an attractive tool for low-cost intensification of (bio)-processes. Polyvinyl alcohol-sodium alginate hydrogels crosslinked with boric acid and post-cured with sulfate (PVA-SA-BS) have been applied in bioproduction and water treatment processes, but the low pH required for crosslinking may negatively affect biocatalyst functionality. Here, we investigate how crosslinking pH (3, 4, and 5) and time (1, 2, and 8 h) affect the physicochemical, elastic, and process properties of PVA-SA-BS beads. Overall, bead properties were most affected by crosslinking pH. Beads produced at pH 3 and 4 were smaller and contained larger internal cavities, while optical coherence tomography suggested polymer cross-linking density was higher. Optical coherence elastography revealed PVA-SA-BS beads produced at pH 3 and 4 were stiffer than pH 5 beads. Dextran Blue release showed that pH 3-produced beads enabled higher diffusion rates and were more porous. Last, over a 28-day incubation, pH 3 and 4 beads lost more microspheres (as cell proxies) than beads produced at pH 5, while the latter released more polymer material. Overall, this study provides a path forward to tailor PVA-SA-BS hydrogel bead properties towards a broad range of applications, such as chemical, enzymatic, and microbially catalyzed (bio)-processes.

Formation, application, and storage-reactivation of aerobic granular sludge: A review

It was an important discovery in wastewater treatment that the microorganisms in the traditional activated sludge can form aerobic granular sludge (AGS) by self-aggregation under appropriate water quality and operation conditions. With a typical three-dimensional spherical structure, AGS has high sludge-water separation efficiency, great treatment capacity, and strong tolerance to toxic and harmful substances, so it has been considered to be one of the most promising wastewater treatment technologies. This paper comprehensively reviewed AGS from multiple perspectives over the past two decades, including the culture conditions, granulation mechanisms, metabolic and structural stability, storage, and its diverse applications. Some important issues, such as the reproducibility of culture conditions and the structural and functional stability during application and storage, were also summarized, and the research prospects were put forward. The aggregation behavior of microorganisms in AGS was explained from the perspectives of physiology and ecology of complex populations. The storage of AGS is considered to have large commercial potential value with the increase of large-scale applications. The purpose of this paper is to provide a reference for the systematic and in-depth study on the sludge aerobic granulation process.

N-Acyl-Homoserine Lactone (AHL)-Mediated Microalgal-Bacterial Communication Driving Chlorella-Activated Sludge Bacterial Biofloc Formation

N-acyl-homoserine lactones (AHLs) as autoinducers of Gram-negative bacteria for quorum sensing regulation have shown positive effects on the production of aromatic proteins in extracellular polymeric substances (EPSs) during bioflocculation. To investigate the role of AHLs in aromatic protein production, a Chlorella-bacteria system with great bioflocculation was established via fed-batch cultivation. Tryptophan and aromatic proteins as the main compounds in the EPS of bioflocs showed an increasing trend during fed-batch cultivation. The Chlorella cells only secreted tryptophan rather than aromatic proteins during axenic cultivation. N-dodecanoyl-l-homoserine lactone (C12-HSL) was correlated with the flocculation activity and extracellular protein content of bioflocs during fed-batch cultivation. The addition of exogenous C12-HSL enhanced the flocculation activity of the Chlorella-bacteria system and aromatic protein production in the EPS. Chlorella cells sensed exogenous C12-HSL and significantly upregulated the aromatic protein synthesis pathway during axenic cultivation. In addition, vanillin as a quorum-sensing inhibitor suppressed the positive effect of C12-HSL on flocculation activity and aromatic protein production and synthesis. This result indicated that vanillin intercepts the response of Chlorella cells to C12-HSL. Overall, C12-HSL is supposed to be an important signal molecule to achieve communication between Chlorella and Gram-negative bacteria and subsequently induce Chlorella cells to produce aromatic proteins for biofloc formation.

Effect of different forms and components of EPS on sludge aggregation during granulation process of aerobic granular sludge

The characteristics of three forms of extracellular polymeric substances (EPS) and their component proteins (PN) and polysaccharides (PS) during the granulation process of aerobic granular sludge (AGS) and their effects on the aggregation performance of AGS were studied. Meanwhile, Pearson correlation analysis was conducted to explore the correlations between different forms of EPS and their components and sludge properties in the granulation process. The results showed that the AGS reactor could be started within 40 days by using the strategy of decreasing sedimentation time, and the sludge granulation degree was 90.22%. It was found that the content of tightly bound EPS (TB-EPS) accounted for 72.81-93.11% of the total EPS. Compared with dissolved EPS (S-EPS) and loosely bound EPS (LB-EPS), TB-EPS had a great impact on the zeta potential and hydrophobicity of sludge surface. During the granulation process, the content and relative hydrophobicity of PN in TB-EPS increased from 30.38 ± 0.12 mg/g VSS to 83.99 ± 2.05 mg/g VSS and 37.63%-71.25%, respectively. Through the flocculation experiment, it showed that the contribution rate of TB-EPS to the flocculation capacity of sludge cells increased from 13.30% to 35.37% and that of PN to flocculation capacity was 76.93%, which was 6.8 times that of PS. It indicated that TB-EPS played the most critical role in the formation of AGS and the PN in EPS was the major contributor to promoting the formation of AGS and enhance its aggregation performance. This research could further understand the role of various forms of EPS and its components in the process of sludge granulation, reveal the sludge granulation mechanism, and provide theoretical support for the rapid start-up of AGS reactor.

Differences in exopolysaccharides of three microbial aggregates

Different microbial aggregates show substantial differences in morphology, and extracellular polymer substances have been confirmed to play a key role in the formation of aggregates. In this study, three different microbial aggregates and their exopolysaccharides were compared. The results show that the granular sludge was largest in size and the most compact in shape. Biofilms with a certain thickness had the next greatest density, and flocculent sludge, with the smallest particle size, was the loosest. The extended Derjaguin-Landau-Verwey-Overbeek analysis shows that hydrogen bonding, hydrophobic and electrostatic interactions affect the aggregation of microorganisms. A comparison of exopolysaccharides shows that granular sludge exopolysaccharides show the highest hydrophobicity (38.08%) and lowest surface charge (-20.5 mV), followed by biofilm exopolysaccharides (27.9% and -24.8 mV respectively). The results of Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy show that the contents of hydrophilic and hydrophobic functional groups and charged functional groups of exopolysaccharides affect the above properties of exopolysaccharides, thereby affecting microbial aggregation. In addition, the hydrogen bond content of exopolysaccharides in granular sludge (19.3%), biofilm (19.2%) and activated sludge (18.9%) decreased sequentially. This also affects the cross-linking of microbial exopolysaccharides to form hydrogels. Finally, the results of confocal laser scanning microscopy showed that, different from the other two aggregates, the extracellular α-polysaccharides of granular sludge are mainly distributed in the nucleus, which is more conducive to aggregation. The research results of this thesis provide a new understanding of the differences in the aggregation morphology of different aggregates from the perspective of exopolysaccharides.

Multidisciplinary characterization of nitrogen-removal granular sludge: A review of advances and technologies

Nitrogen-removal granular sludge (NRGS) is a promising technology in wastewater treatment, with advantages of efficient nitrogen removal, less footprint, lower sludge production and energy consumption, and is a way for wastewater treatment plants to achieve carbon-neutrality. Aerobic granular sludge (AGS) and anammox granular sludge (AnGS) are two typical NRGS technologies that have attracted extensive attention. Mounting evidence has shown strong associations between NRGS properties and the status of NRGS systems; however, a holistic view is still missing. The aim of this article is to provide an overview of NRGS with an emphasis on characterization. Specifically, the integrated nitrogen transformation pathways inside NRGS and the performance of NRGS treating various wastewaters are discussed. NRGS properties are categorized as physical-, chemical-, biological- and systematical ones, presenting current advances and corresponding characterization technologies. Finally, the future prospects for furthering the mechanistic understanding and engineering application of NRGS are proposed. Overall, the technological advancements in characterization have greatly contributed to understanding NRGS properties, which are potential factors for optimizing the performance and evaluating the working status of NRGS. This review will provide guidance in characterizing NRGS properties and boost the introduction of novel characterization technologies.

Phosphorus deficiency leads to the loosening of activated sludge: The role of exopolysaccharides in aggregation

Whether phosphorus deficiency in influent will affect the aggregation and sedimentation of activated sludge needs to be further clarified. This paper systematically studied the structure, aggregation and settlement of activated sludge, and the composition, properties and chemical structure of extracellular polymers and microbial community structure of sludge under different influent phosphorus contents to determine the causes of sludge aggregation and structural deterioration. The results show that phosphorus deficiency in influent leads to a decrease in the aggregation capacity and a loose structure of activated sludge, and the reduction of hydrophobic interactions is the main factor of sludge aggregation and structural deterioration. The content, functional groups and protein secondary structure of extracellular protein were almost unchanged. An increase in the content and hydrophilicity of extracellular polysaccharide (PS) results in a decrease in sludge hydrophobicity. Under phosphorus deficiency, the changes in microbial species related to PS secretion were the reasons for the increase in PS content and hydrophilicity. The negative effects of PS content and hydrophilicity on sludge aggregation and structure are important findings of this work and are expected to be useful for better understanding the restoration of activated sludge performance in the treatment of phosphorus-deficient wastewater.

Deciphering the floatation reversibility of anammox sludge: A balance between sludge rheological intensity and external hydraulic shearing

Sludge floatation is inevitable in anammox granular reactors, which reduces the effective granules participating in anammox reaction and weakens the robust operation of anammox reactors. However, so far, the involved floatation mechanisms as well as the floatation mitigation measurements have not been well proposed. In this study, floating sludge (including irreversibly floating sludge (FS_I) and reversibly floating sludge (FS_R)) and settled granule sludge (SGS) were collected from an anammox expanded granular sludge bed (EGSB) reactor and compared in terms of morphological, physical, chemical and microbial properties. The particle size ranked FS_I > SGS > FS_R, and cavities were distinctly observed in FS_I due to the gas pockets and cell lysis. Rheological measurements revealed that the storage modulus (represent intensity of sludge) of FS_I and SGS were comparable, both of which were approximately1.4 times greater than that of FS_R. High storage modulus indicated that the hydraulic shear force in the EGSB was not strong enough to destroy FS_I and release the gases trapped in gas pocket, resulting in the irreversible floatation of FS_I. Whereas, the dinitrogen gases adhered onto FS_R were readily stripped from FS_R under hydraulic shearing, which contributed to their reversible floatation property. It is concluded that sludge floatation is resulted from the gas accumulation or gas adhesion onto the sludges, while the sludge floatation reversibility depends on the sludge intensity and hydraulic shear force. Our findings elucidate the floatation properties of anammox sludge via rheological analysis, which will contribute to the proper sludge floatation control and facilitate the optimization of anammox granule fluidization in EGSB reactor.

Constructed microalgal-bacterial symbiotic (MBS) system: Classification, performance, partnerships and perspectives

The microalgal-bacterial symbiotic (MBS) system shows great advantages in the synchronous implementation of wastewater treatment and nutrient recovery. To enhance the understanding of different MBS systems, this review summarizes reported MBS systems and proposes three patterns according to the living state of microalgae and bacteria. They are free microalgal-bacterial (FMB) system, attached microalgal-bacterial (AMB) system and bioflocculated microalgal-bacterial (BMB) system. Compared with the other two patterns, BMB system shows the advantages of microalgal biomass harvesting and application. To further understand the microalgal-bacterial partnerships in the bioflocculation of BMB system, this review discusses bioflocs characteristics, extracellular polymeric substances (EPS) properties and production, and the effect of microalgae/bacteria ratio and microalgal strains on the formation of bioflocculation. Microalgal biomass production and application are important for BMB system development in the future. Food processing wastewater characterized by high biodegradability and low toxicity should be conducive for microalgal cultivation. In addition, exogenous addition of functional bacteria for nutrient removal and bioflocculation formation would be a crucial research direction to facilitate the large-scale application of BMB system.

Insight into the role of exopolysaccharide in determining the structural stability of aerobic granular sludge

Extracellular polymeric substances (EPS) have a critical contribution to the stability of aerobic granular sludge (AGS), but the mechanism and details of EPS composition and function are far from clear. This work investigated the contribution of exopolysaccharide (PS) to maintaining the structural stability of AGS. The results revealed that PS hydrolysis induced by α-amylase, dextranase and cellulase significantly decreased the granular stability, whereas a substantial content reduction of extracellular protein (PN) was also observed. It was also found that hydrolysis of PS led to a decrease of sludge hydrophobicity, granular gel mechanical strength by 14.09 %, 38.67 %, respectively, and an increase of surface free energy by 49.59 %, which is not conducive to granular stability. Through fluorescent staining, existence of large amounts of PS and PN conjugates in EPS matrix was verified. It was proposed that these conjugates with PS as skeleton (PS-PN) dominate granular stability by affecting hydrophobicity interactions and hydrogen bonds system, which are two important parameters to gel properties, constituting a crucial finding of this work. This study offers an supplementation of EPS system theory and granular stability mechanism.

Start-up of an aerobic granular sludge system from stored granules: Evaluating the impact of storage period on biomass activity and stability and the effect of temperature on nitrification and phosphorus removal rates

Aerobic granular sludge (AGS) has been considered a breakthrough within the wastewater treatment sector. However, the long reactor start-up for the formation of granules is challenging and may hinder the spread of this technology. To circumvent this obstacle, inoculation of the reactors with pre-formed granules from existing plants is an interesting approach. In this context, issues related to biomass storage becomes very relevant. In this study, reactivation of aerobic granular biomass after storage was evaluated in a sequencing batch reactor (SBR) designed for achieving simultaneous organic matter, nitrogen and phosphorus removal. Two different scenarios, short (40 days) and long (180 days) storage periods, were assessed, and their influence on the granules physical properties and bioactivity was addressed. The results revealed that the granules stored for a shorter period showed higher resistance to breakage and underwent smooth color changes. On the other hand, the biomass stored for a longer period acquired a dark color and was more susceptible to disruption during reactivation. The granules stored for 6 months become swollen and exhibited an irregular morphology and fluffy structure within the first days of reactivation. Consequently, their settling properties were adversely affected, and some parameters such as the food-to-microorganism ratio had to be adjusted to prevent granules disintegration. Regarding the bioactivity of important microbial functional groups, COD removal was rapidly restored within a few days of SBR operation with the biomass stored for a shorter period. However, it took longer for the biomass stored for 180 days to reach the same performance observed for the granules stored for 40 days. A similar trend is valid for nitrification. In the experiments with sludge stored for a longer time, it took almost twice as long to reach effluent ammonium concentrations lower than 1 mg NH₄⁺-N L^-1 compared to the test using biomass stored for 40 days. Phosphate removal was strongly affected by biomass storage, especially after 180 days of inactivity, a condition found to be detrimental for polyphosphate-accumulating organisms. Finally, cycle tests were also conducted to assess substrate conversion rates for comparison between different trials and evaluate the influence of temperature (10-35 °C) on nitrification and phosphate removal rates.

Insight into enrichment of anaerobic ammonium oxidation bacteria in anammox granulation under decreasing temperature and no strict anaerobic condition: Comparison between continuous and sequencing batch feeding strategies

A continuous flow reactor (CFR) and a sequencing batch reactor (SBR) were operated in parallel to investigate the difference between anammox granulation in CFR and SBR under decreasing temperature and no strict anaerobic condition. The results showed that the biomass achieved initial granulation successfully (D [4, 3] = 280.44 and 346.28 μm) in both CFR and SBR on day 70. Compared with SBR, a better performance (0.33 kg N m^-3 d^-1) was gotten in CFR due to a better retention capacity of biomass (1397 mg L^-1), when seasonal drop of water temperature occurred (18-14 °C). Thus, different operations led to different granulation styles of anammox. Granules in CFR had better rheological properties than that in SBR. Based on a stable and suitable environment provided by CFR, anaerobic ammonium oxidation bacteria (AnAOB) are able to self-aggregate easily and secret extracellular polymeric substances (EPS), which can capture other bacteria as home guardians. In SBR, AnAOB live inside the tan granules under the protection of other bacteria and thick EPS; other aggregations stick to solid carrier surface to form biofilm.

Layered viscoelastic properties of granular biofilms

Granular biofilms are dense spherical complex biological systems composed mainly of multi-microbial cells, water, and extracellular polymeric substances (EPS). They facilitate efficient purification and settling of activated sludge in wastewater treatment processes. The viscoelastic properties of these complex biofilm systems are important characteristics that control their growth and dictate how they respond to hydrodynamic forces and chemical stimuli. However, the viscoelastic properties of granular biofilms are poorly understood. In this paper, we study granular biofilms' viscoelastic properties using optical coherence elastography (OCE), a nondestructive method that integrates optical coherence tomography (OCT) with elastic wave propagation. While quantitative viscoelastic characterization of granular biofilms is challenging due to their heterogeneous properties, we show that elastic waves are suitable for this purpose. First, we employ guided elastic waves in a thin section of a granular biofilm to reveal a two-layered profile for the viscoelastic properties. Next, we utilize circumferential elastic waves that propagate near the surface of a non-sectioned spherical biofilm to quantify the layered system's viscoelastic properties. To the best of our knowledge, this work is the first quantitative study that characterizes the layered viscoelastic properties of granular biofilms. The measurement approach may provide a platform to study the interplay between the viscoelastic properties and other characteristics of granular biofilms such as the complex microbial system, morphology, and oxygen distribution.

Integrated review of resource recovery on aerobic granular sludge systems: Possibilities and challenges for the application of the biorefinery concept

Aerobic Granular Sludge (AGS) is a biological treatment technology that has been extensively studied in the last decade. The possibility of resource recovery has always been highlighted in these systems, but real-scale applications are still scarce. Therefore, this paper aimed to present a systematic review of resources recovery such as water, energy, chemicals, raw materials, and nutrients from AGS systems, also analyzing aspects of engineering and economic viability. In the solid phase, sludge application in agriculture is an interesting possibility. However, the biosolids' metal concentration (the granules have high adsorption capacity due to the high concentration of extracellular polymeric substances, EPS) may be an issue. Another possibility is the recovery of Polyhydroxyalkanoates (PHAs) and Alginate-like exopolymers (bio-ALE) in the solid phase, emphasizing the last one, which has already been made in some Wastewater Treatment Plants (WWTPs), named and patented as Kaumera® process. The Operational Expenditure (OPEX) can be reduced by 50% in the WWTP when recovery of ALE is made. The ALE recovery reduced sludge yield by up to 35%, less CO₂ emissions, and energy saving. Finally, the discharged sludge can also be evaluated to be used for energetic purposes via anaerobic digestion (AD) or combustion. However, the AD route has faced difficulties due to the low biodegradability of aerobic granules.

Formation and ripening of alginate-like exopolymer gel layers during and after membrane filtration

The properties of biofilm EPS are determined by the multiple interactions between its constituents and the surrounding environment. Because of the high complexity of biofilm EPS, its constituents' characterisation is still far from thorough, and identification of these interactions cannot be done yet. Therefore, we use gels of bacterial alginate-like exopolysaccharides (ALEs) as a model component for biofilm EPS in this work. These gels have been examined for their cohesive properties as a function of CaCl₂ and KCl concentration. Hereto, ALE gel layers were formed on membranes by dead-end filtration of ALE solutions. Accumulation of the cations Ca²⁺ and K⁺ in the gels could be well predicted from a Donnan equilibrium model based on the fixed negative charges in the ALE. This suggests that there is no specific binding of Ca²⁺ to the ALE and that on the time scale of the experiments, the Ca²⁺ ions can distribute freely over the gel and the surrounding solution. The concentration of fixed negative charges in the ALE was estimated around 1 mmol/g VSS (volatile suspended solids, organic mass) from the Donnan equilibrium. Moreover, an accumulation of H⁺ was predicted. Gels with more CaCl₂ in the supernatant were more compact and bore a higher osmotic pressure than those with less CaCl₂, revealing the role of Ca²⁺ ions in the network crosslinking. It is hypothesised that this mechanism later transitions into a rearrangement of the ALE molecules, which eventually leads to a fibrous network structure with large voids.

Biodegradation of natural and synthetic endocrine-disrupting chemicals by aerobic granular sludge reactor: Evaluating estrogenic activity and estrogens fate

In this study, the biodegradation of endocrine-disrupting chemicals (EDCs) (namely the natural and synthetic estrogens 17β-estradiol (E2) and 17α-ethinylestradiol (EE2), respectively) was assessed in an aerobic granular sludge (AGS) sequencing batch reactor (SBR) treating simulated domestic sewage. To better understand the fate of these compounds, their concentrations were determined in both liquid and solid (biomass) samples. Throughout the operation of the reactor, subjected to alternating anaerobic and aerated conditions, the removal of the hormones, both present in the influent at a concentration of 20 μg L^-1, amounted to 99% (for E2) and 93% (for EE2), with the latter showing higher resistance to biodegradation. Through yeast estrogen screen assays, an average moderate residual estrogenic activity (0.09 μg L^-1 EQ-E2) was found in the samples analysed. E2 and EE2 profiles over the SBR cycle suggest a rapid initial adsorption of these compounds on the granular biomass occurring anaerobically, followed by biodegradation under aeration. A possible sequence of steps for the removal of the micropollutants, including the key microbial players, was proposed. Besides the good capability of the AGS on EDCs removal, the results revealed high removal efficiencies (>90%) of COD, ammonium and phosphate. Most of the incoming organics (>80%) were consumed under anaerobic conditions, when phosphate was released (75.2 mgP L^-1). Nitrification and phosphate uptake took place along the aeration phase, with effluent ammonium and phosphate levels around 2 mg L^-1. Although nitrite accumulation took place over the cycle, nitrate consisted of the main oxidized nitrogen form in the effluent. The specific ammonium and phosphate uptake rates attained in the SBR were found to be 3.3 mgNH₄⁺-N gVSS^-1.h^-1 and 6.7 mgPO₄^3--P gVSS^-1 h^-1, respectively, while the specific denitrification rate corresponded to 1.0 mgNO_x^--N gVSS^-1 h^-1.

Extracellular biopolymers recovered as raw biomaterials from waste granular sludge and potential applications: A critical review

Granular sludge (GS) is a special self-aggregation biofilm. Extracellular polymeric substances (EPS) are mainly associated with the architectural structure, rheological behaviour and functional stability of fine granules, given that their significance to the physicochemical features of the biomass catalysing the biological purification process. This review targets the EPS excretion from GS and introduces newly identified EPS components, EPS distribution in different granules, how to effectively extract and recover EPS from granules, key parameters affecting EPS production, and the potential applications of EPS-based biomaterials. GS-based EPS components are highly diverse and a series of new contents are highlighted. Due to high diversity, emerging extraction standards are proposed and recovery process is capturing particular attention. The major components of EPS are found to be polysaccharides and proteins, which manifest a larger diversity of relative abundance, structures, physical and chemical characteristics, leading to the possibility to sustainably recover raw materials. EPS-based biomaterials not only act as alternatives to synthetic polymers in several applications but also figure in innovative industrial/environmental applications, including gel-forming materials for paper industry, biosorbents, cement curing materials, and flame retardant materials. In the upcoming years, it is foreseen that productions of EPS-based biomaterials from renewable origins would make a significant contribution to the advancement of the circular economy.

Anammox Granule Enlargement by Heterogenous Granule Self-assembly

Expansion in the size is an indispensable stage in the granular sludge life cycle, but little attention has been payed to the enlargement mechanism of granular sludge. Here, we propose a novel anammox granule enlargement mechanism by the self-assembly of heterogenous granules. Two different colors of anammox granules, dark-red granules (DR-Granules) and bright-red granules (BR-Granules) were found in an expanded granular sludge bed reactor. These two heterogenous granules were not isolated but were assembled into granules with a larger DR-Granule in the center and many smaller BR-Granules aggregated on the surface, increasing the overall granular size. Their physiochemical characteristics in terms of EPS, adherence, rheological properties, and microbial compositions, were identified and compared to elucidate the interaction between the different colors of granules. The BR-Granules created 92% more extracellular polymeric substances than the DR-Granules. This material blocked the passage of gas and substrate, leading to BR-Granules smaller size and a yield stress approximately 48% lower than that of the DR-Granules. Nevertheless, the BR-Granules had compact extracellular protein secondary structures and a high adherence rate to the surface of the DR-Granules, upon which they formed a compact adhered layer. These unique features enabled them to directionally adhere to DR-Granules in the core, that is, two heterogenous colors of granules self-assembled into large anammox granules. The enlargement mechanism was further supported by the abundance of K-strategy Ca. Kuenenia in the DR-Granules (inner layer) being higher than in the BR-Granules (outer layer; 2.9 ± 0.4% vs. 0.4 ± 0.1%; p = 0.0003) and by visualized confirmation that the larger BR-Granules wrapped around smaller DR-Granules inside. This demonstrates that heterogenous anammox granules actively self-assemble into large granules, which is an important step in the lifecycle of anammox granules.

Impact of metal ions on structural EPS hydrogels from aerobic granular sludge

Structural extracellular polymeric substances (structural EPS) can form stable hydrogels and are considered to be responsible for the stability of biofilms and aerobic granular sludge. Structural EPS were extracted from aerobic granular sludge and characterized for their gel-forming capacity with different alkaline earth and transition metal ions. The structural EPS hydrogels were compared to alginate hydrogels. Alginate is a well characterized polymer which is able to form stiff hydrogels with multivalent ions. The stiffness of the obtained hydrogels was measured with dynamic mechanical analysis and quantified by the Young's modulus. Furthermore the stability of structural EPS hydrogels towards disintegration in the presence of ethylenediaminetetraacetic acid (EDTA) was evaluated at pH 4.5-10.5 and compared to that of alginate, polygalacturonic acid and κ-carrageenan. The stiffness of alginate hydrogels was multiple times higher than that of structural EPS. Alkaline earth metals resulted in stiffer alginate hydrogels than transition metals. For structural EPS this trend was opposite to alginate. Independent of the pH, polysaccharide hydrogels were quickly disintegrated when being exposed to EDTA. Structural EPS hydrogels demonstrated greater stability towards EDTA and were still intact after one month at pH 4.5-8.5. It is suggested that the gelling mechanism of structural EPS is not only related to metal ion complexation of the polymers, but to a combination of interactions of multiple functional groups present in structural EPS. This study helps to further understand and characterize structural EPS from aerobic granular sludge, and therewith understand its stability and that of biofilms in general.

Visual evidence for anammox granules expanding their size by aggregation of anammox micro-granules

Granular sludge is superior in sustainable wastewater treatment; however, no consensus has achieved in its formation mechanism. In this study, we provide visual and experimental evidences to reveal how the large anammox granules formed. Micro-observation of anammox granules illustrated that some special anammox granules were clearly composed of numerous micro-granules, which enveloped by transparent extracellular polymeric substances (EPS). Static culture experiment proved that anammox granules were easy to aggregate and form a larger entirety within approximately 14 days when there were no severe external disturbances (mainly hydraulic shear force). Stratified EPS extraction and selective enzymatic digestion tests further elucidated that tightly-bound EPS and extracellular proteins were the most vital constituents in maintaining the structure of anammox granules, and the minimal size of anammox micro-granules that aggregated to form large anammox granules was approximately 100-150 μm in the reactor studied herein. Our findings highlight that anammox granules could expand their size and form larger granules by the aggregation of anammox micro-granules, representing a natural but significant granule formation and enlargement mechanism. Understanding the enlargement mechanism could consummate the granulation process and help to culture large size anammox granules.

The branched chains and branching degree of exopolysaccharides affecting the stability of anammox granular sludge

The effect of extracellular polysaccharides on the structural stability of granular sludge is widely recognized, and determining their mechanism of action on the stability of granules remains challenging. Herein, enzymatic experiments were used to systematically study the stability changes and internal mechanisms of anammox granular sludge following hydrolysis of extracellular proteins and polysaccharides (PS). The results revealed that the selective hydrolysis of the proteins hardly affected the stability of the granules, while the hydrolysis of the PS branched chains caused the granules to disintegrate. The hydrolysis of the PS chains in the EPS matrix decreased the degree of branching, width and height via nuclear magnetic resonance (NMR) spectroscopy and atomic force microscopy (AFM), and these parameters are closely related to granular stability. Moreover, scanning electron microscopy (SEM) showed a large number of pores and cracks on the granules, bacterial adhesion decreased, and the EPS adhered to the surface of the granules dissolved. The changes in the gel characteristics of the granules were studied by rheology, and the mechanical strength and viscosity of the granular sludge decreased. For the surface characteristics of granules, the zeta potential and hydrophobicity both decreased, revealing that changes in the branched-chain configuration of the PS and the degree of branching caused granular disintegration. Spectral analysis showed that the hydrolysis of the branch points and the branched glycosides of PS led to a higher proportion of hydrophilic and electronegative groups in the EPS matrix, which hindered bacterial aggregation and reduced anammox granule stability. This investigation clarifies the impact of the branched-chain configuration of the PS and their degree of branching on anammox granule stability, which will promote the further application of anammox granules.

Strength characterization of full-scale aerobic granular sludge

For a stable operation, the aerobic granular sludge process requires mechanically strong granules in balance with the shear forces in the reactor. Despite a wide general interest in granular stability, the mechanical strength of both anaerobic and aerobic granular sludge received very little attention. In this study, a high-shear method for strength characterization has been evaluated for full-scale aerobic granular sludge (AGS). Abrasion times up to 90 min showed a stable abrasion rate coefficient (K), while prolonged periods of abrasion up to 24 h resulted in a decrease in abrasion rate. Larger granules have higher abrasion rate than smaller granules. No abrasion was observed at low shear rates, indicating a threshold shear rate for abrasion. Lab-scale AGS showed a lower abrasion rate than full-scale AGS. Incubation of full-scale granules in NaCl led to a decrease in abrasion rate at 25 g L^-1 NaCl, but incubation in 50 g L^-1 NaCl led to a further decrease for only half of the tested granular sludge samples.

Effects of acid, acid-ZVI/PMS, Fe(II)/PMS and ZVI/PMS conditioning on the wastewater activated sludge (WAS) dewaterability and extracellular polymeric substances (EPS)

The effects of four conditioning approaches: Acid, Acid-zero-valent iron (ZVI)/peroxydisulfate (PMS), Fe(II)/PMS and ZVI/PMS, on wastewater activated sludge (WAS) dewatering and organics distribution in supernatant and extracellular polymeric substances (EPS) layers were investigated. The highest reduction in bound water and the most WAS destruction was achieved by Acid-ZVI/PMS, and the optimum conditions were pH 3, ZVI dosage 0.15 g/g dry solid (DS), oxone dosage 0.07 g/g DS and reaction time 10.6 min with the reductions in capillary suction time (CST) and water content (Wc) as 19.67% and 8.49%, respectively. Four conditioning approaches could result in TOC increase in EPS layers and supernatant, and protein (PN) content in tightly bound EPS (TB-EPS). After conditioning, organics in EPS layers could migrate to supernatant. Polysaccharide (PS) was easier to migrate to supernatant than PN. In addition, Acid, Acid-ZVI/PMS or Fe(II)/PMS conditioning promoted the release of some polysaccharides containing ring vibrations v PO, v C-O-C, v C-O-P functional groups from TB-EPS. ESR spectra proved that both radicals of SO₄^-· and ·OH contributed to dewatering and organics transformation and migration. CST value of WAS positively correlated with the ratios of PN/PS in LB-EPS and total EPS, while it negatively correlated with TOC, PN content and PS content in TB-EPS, as well as PS content in supernatant and LB-EPS. BWC negatively correlated to zeta potential and TOC value, PN content, and HA content in supernatant.

A comparative study on membrane fouling alleviation mechanisms by using nanoscale Fe3O4 and poly dimethyldiallylammonium chloride

Membrane bioreactor (MBR) has become a promising technology for wastewater treatment. However, membrane fouling frequently occurred which greatly increased operational expense. Two different membrane fouling alleviation mechanisms were explored in this study. Addition of poly dimethyldiallylammonium chloride (PDMDAAC) facilitated formation of flocs-flocs aggregates, which were more adaptable to the changing environment, resulting in less soluble microbial products (SMP) secretion. However, PDMDAAC lose activity gradually, and had a less sustainable effect on membrane fouling alleviation. Nanoscale Fe₃O₄ was applied to alleviate membrane fouling, and membrane sustainable filtration cycle extended 2-fold compared to the control group. Results showed that dehydrogenase activity in the reactor with optimal addition of nanoscale Fe₃O₄ increased 2.86 ± 0.11 times compared to control group. SMP (especially tryptophan protein-like substances) decreased to 9.79 ± 1.34 mg L^-1 with the addition of nanoscale Fe₃O₄, which was lower than that in the control group (15.31 ± 0.53 mg L^-1). It's speculated that nanoscale Fe₃O₄ performed as conductive material, which intensified interspecies electron transfer. The sludge dehydrogenase activity was then enhanced, which facilitated the utilization and microbial degradation of SMP, suppressing membrane fouling consequently.

Understanding the role of extracellular polymeric substances in the rheological properties of aerobic granular sludge

The gel-properties of aerobic granular sludge could sustain the mechanical strength and stability of granules during the operation of wastewater treatment. The contributing extracellular polymeric substances to the gel strength of aerobic granular sludge were verified from the perspective of rheological properties in this study. Moreover, the correlations between the molecular structure and gel properties of extracellular polymeric substances were established by analyzing rheological properties and spectrum results of extracellular polymeric substances extracted by various extraction methods. The results indicated that protein and polysaccharide were indispensable to maintain the cross-linking structure of extracellular polymeric substances. The gel strength of extracellular polymeric substances was positively correlated with the amount of α-helix of natural protein and intermolecular hydrogen bond between each component. The cation exchange resin method which retained the relatively higher ratio of α-helix of natural protein and intermolecular hydrogen bond could better preserve the gel properties of the original aerobic granular sludge. This study could provide a theoretical reference for the cultivation of aerobic granular sludge and the optimization of operating conditions of the reactor.

Performance and mechanisms of wastewater sludge conditioning with slag-based hydrotalcite-like minerals (Ca/Mg/Al-LDH)

Extracellular polymeric substances (EPS) in wastewater sludge form a network structure that is highly hydrophilic and compressible. Thus chemical conditioning is always required to improve sludge dewaterability by changing the gelatinous structure of sludge flocs. Layered double hydroxides (LDH) are generally characterized by large surface area and high anion exchange capacity, so we prepared three types of hydrotalcite-like compounds (Ca/Mg/Al-LDHs) from a typical solid waste, blast furnace slag, using NaOH precipitation (giving LDH_a), a hydrothermal method (LDH_b), and NaOH-Na₂CO₃ precipitation (LDH_c). The physicochemical properties of the three LDH were comprehensively characterized, and their effectiveness as sludge conditioners was evaluated. The results showed that LDH conditioning was able to promote sludge dewaterability, and conditioning efficiency was strongly dependent on LDH structural properties. LDH neutralized the negative charges onto sludge particles and interacted with EPS to increase floc strength. LDH also formed a skeletal structure that reduced sludge compressibility. In addition, there were interactions between the LDH surfaces and the OC-OH in EPS proteins, which altered the secondary structure of protein molecules, consequently increasing sludge dewaterability. The biomolecules of low-molecular-weight fractions (such as peptides and humic acids) in soluble EPS intercalated LDH. Both the surface complexation of organic matter containing carboxyl groups and the intercalation of small molecules in soluble EPS were responsible for EPS-LDH interactions. The combination of skeleton formation, electrostatic interaction, and EPS-LDH interactions resulted in compression of gel-like structure and improved sludge dewatering performance. We finally suggested a novel sludge treatment process that increases sludge dewaterability using slag-derived Ca/Mg/Al-LDH to condition the sludge, and it could be combined with pyrolysis to prepare multi-functional materials or bio-oil.

Insight into the response of anammox granule rheological intensity and size evolution to decreasing temperature and influent substrate concentration

Anammox granules are advantageous because of their relatively higher nitrogen removal rate (NRR) and biomass retention capacity in ammonia-containing wastewater treatment. However, little attention has been paid to granule rheological intensity and size evolution, especially under low temperature and substrate concentration conditions. In this study, the size evolution and variations in rheological properties associated with biochemical characteristics of anammox granules were investigated at decreasing temperatures (35 → 13 °C) and influent substrate concentrations (300 → 50 mg NH₄⁺-N L^-1). Both the specific anammox activities (SAA) and yield stress (τ_c) (or storage modulus (G')), which reflected granules' intensity, decreased with decreasing temperature and influent substrate concentration. An exponential correlation was found between SAA and τ_c (or G'). Granule size strongly decreased at low temperature (13 °C) and influent substrate concentration (50 mg NH₄⁺-N L^-1), despite slight variations in τ_c (or G'). A threshold τ_c (or G') that is closely related to the hydrodynamic shear force in the reactor may exist for the anammox granules. Once the τ_c (or G') of the anammox granules was lower than this threshold value (τ_c^∗ = 10.13-15.63 kPa), granules that could not endure hydrodynamic shear forces would disintegrate and their size would decrease substantially. Candidatus Kuenenia was the dominant genus in the expanded granular sludge bed reactor, reaching a minimum abundance of 14.6% at 16 °C because of the low-temperature shock, but increasing in abundance to 57.0% at 13 °C, indicating it has a competitive advantage at low temperatures. This contributed to achieving a high reactor nitrogen loading rate (>1.0 kg N m^-3 d^-1) even at 13 °C or with 50 mg NH₄⁺-N L^-1 influent. Overall, the results of this study will facilitate management of anammox bioreactors that run at various temperatures and influent substrate concentrations by clarifying the correlation between rheological intensity and anammox granule sludge activity and identifying the τ_c (or G') threshold.

Towards mechanical characterization of granular biofilms by optical coherence elastography measurements of circumferential elastic waves

Microbial granular biofilms are spherical, multi-layered aggregates composed of communities of bacterial cells encased in a complex matrix of hydrated extracellular polymeric substances (EPS). While granular aggregates are increasingly used for applications in industrial and municipal wastewater treatment, their underlying mechanical properties are poorly understood. The challenges of viscoelastic characterization for these structures are due to their spherical geometry, spatially heterogeneous properties, and their delicate nature. In this study, we report a model-based approach for nondestructive characterization of viscoelastic properties (shear modulus and shear viscosity) of alginate spheres with different concentrations, which was motivated by our measurements in granular biofilms. The characterization technique relies on experimental measurements of circumferential elastic wave speeds as a function of frequency in the samples using the Optical Coherence Elastography (OCE) technique. A theoretical model was developed to estimate the viscoelastic properties of the samples from OCE data through inverse analysis. This work represents the first attempt to explore elastic waves for mechanical characterization of granular biofilms. The combination of the OCE technique and the theoretical model presented in this paper provides a framework that can facilitate quantitative viscoelastic characterization of samples with curved geometries and the study of the relationships between morphology and mechanical properties in granular biofilms.

Sialic acids in the extracellular polymeric substances of seawater-adapted aerobic granular sludge

Sialic acids have been discovered in the extracellular polymeric substances (EPS) of seawater-adapted aerobic granular sludge (AGS). Sialic acids are a group of monosaccharides with a nine-carbon backbone, commonly found in mammalian cells and pathogenic bacteria, and frequently described to protect EPS molecules and cells from attack by proteases or glycosidases. In order to further understand the role of these compounds in AGS, lectin staining, genome analysis of the dominant bacterial species, and shielding tests were done. Fluorescence lectin bar-coding (FLBC) analysis showed an overlap with protein staining, indicating presence of sialoglycoproteins in the EPS matrix. Genome analysis gives a positive indication for putative production of sialic acids by the dominant bacteria Candidatus Accumulibacter. FT-IR analysis shows upon selective removal of sialic acids a decrease in carbohydrates, extension of the protein side chain, and exposure of penultimate sugars. Enzymatic removal of sialic acids results in the removal of galactose residues from the EPS upon subsequent treatment with β-galactosidase, indicating a linkage between galactose and sialic acid at the terminus of glycan chains. This work indicates the importance of sialic acids in the protection of penultimate sugar residues of glycoproteins in EPS, and provides basis for future research in the composition of EPS from biofilms and granular sludge.

Impact of poly dimethyldiallylammonium chloride on membrane fouling mitigation in a membrane bioreactor

Poly dimethyldiallylammonium chloride (PDMDAAC) was applied in a membrane bioreactor (MBR) to study its effects on mitigation of MBR membrane fouling. Floc size, zeta potential, soluble microbial substances (SMP) and extracellular polymeric substances (EPS) secretion were studied with respect to PDMMAAC-dosing operations. Results demonstrated that a sustainable filtration cycle extended 3.3 times with the optimal PDMDAAC dosage of 90 mg L^-1. The addition of PDMDAAC could increase zeta potential of sludge floc, which led to the decrease in repulsive electrostatic interactions between flocs, as well as the facilitation of flocs-to-flocs aggregation. With the optimal dosage of PDMDAAC, the mean size of sludge was 3.23 ± 0.55 times higher than the control group, resulting in higher impact resistance and better adaptive capacity to the changing environment, which led to less SMP secretion. Moreover, a high contaminants removal rate was achieved in the reactor that was dosed with PDMDAAC. The average effluent concentrations of chemical oxygen demand and total nitrogen were less than 45.6 ± 2.85 and 5.23 ± 0.61 mg L^-1, respectively, and the corresponding removal rates were 93.1 ± 5.81% and 89.1 ± 9.61%.

Glycosylated amyloid-like proteins in the structural extracellular polymers of aerobic granular sludge enriched with ammonium-oxidizing bacteria

A new type of structural extracellular polymers (EPS) was extracted from aerobic granular sludge dominated by ammonium-oxidizing bacteria. It was analyzed by Raman and FTIR spectroscopy to characterize specific amino acids and protein secondary structure, and by SDS-PAGE with different stains to identify different glycoconjugates. Its intrinsic fluorescence was captured to visualize the location of the extracted EPS in the nitrifying granules, and its hydrogel-forming property was studied by rheometry. The extracted EPS is abundant with cross ß-sheet secondary structure, contains glycosylated proteins/polypeptides, and rich in tryptophan. It forms hydrogel with high mechanical strength. The extraction and discovery of glycosylated proteins and/or amyloids further shows that conventionally used extraction and characterization techniques are not adequate for the study of structural extracellular polymers in biofilms and/or granular sludge. Confirming amyloids secondary structure in such a complex sample is challengeable due to the possibility of amyloids glycosylation and self-assembly. A new definition of extracellular polymers components which includes glycosylated proteins and a better approach to studying them is required to stimulate biofilm research.

Identification of Glycoproteins Isolated from Extracellular Polymeric Substances of Full-Scale Anammox Granular Sludge

ANaerobic AMMonium OXidation (anammox) is an established process for efficient nitrogen removal from wastewater, relying on anammox bacteria to form stable biofilms or granules. To understand the formation, structure, and stability of anammox granules, it is important to determine the composition of the extracellular polymeric substances (EPS). The aim of this research was to elucidate the nature of the proteins, which are the major fraction of the EPS and were suspected to be glycosylated. EPS were extracted from full-scale anammox granular sludge, dominated by " Candidatus Brocadia", and subjected to denaturing polyacrylamide gel electrophoresis. By further analysis with mass spectrometry, a high abundant glycoprotein, carrying a heterogeneous O-glycan structure, was identified. The potential glycosylation sequence motif was identical to that proposed for the surface layer protein of " Candidatus Kuenenia stuttgartiensis". The heavily glycosylated protein forms a large fraction of the EPS and was also located by lectin staining. Therefore, we hypothesize an important role of glycoproteins in the structuring of anammox granules, comparable to the importance of glycans in the extracellular matrix of multicellular organisms. Furthermore, different glycoconjugates may have distinct roles in the matrix of granular sludge, which requires more in-depth characterization of different glycoconjugates in future EPS studies.

Comparison of different aerobic granular sludge types for activated sludge nitrification bioaugmentation potential

Three types of nitrifying granules were grown on media simulating anaerobic digestion dewatering reject water and compared for their potential to increase nitrification capacity when added to mainstream flocculent activated sludge treatment. An advantage of nitrification bioaugmentation with sidestream granules instead of flocculent biomass is that the granules can be selectively maintained at longer retention times than flocs and thus provide higher nitrification capacity from bioaugmentation. The three granule types and feeding conditions were: nitrifying granules with aerobic feeding, nitrifying-denitrifying granules with anoxic feeding, and nitrifying-denitrifying/phosphate-accumulating (NDN-PAO) granules with anaerobic feeding. NDN-PAO granular sludge showed the highest potential for nitrification bioaugmentation due to its better treatment performance, granule physical characteristics, and much greater production of granular mass and nitrification capacity. Dechloromonas-associated organisms were dominant in these granules; Candidatus Accumulibacter-related organisms were also present. Nitrosomonas was the dominant ammonia-oxidizing bacteria, while Candidatus Nitrotoga was an abundant nitrite-oxidizer in all granule types.

The acid soluble extracellular polymeric substance of aerobic granular sludge dominated by Defluviicoccus sp

A new acid soluble extracellular polymeric substance (acid soluble EPS) was extracted from an acetate fed aerobic granular sludge reactor operated at 35 °C. Acid soluble EPS dominated granules exhibited a remarkable and distinctive tangled tubular morphology. These granules are dominated by Defluviicoccus Cluster II organisms. Acetic acid instead of the usually required alkaline extraction medium was needed to dissolve the granules and solubilise the polymeric matrix. The extracted acid soluble EPS was analysed and identified using various instrumental analysis including ¹H and ¹³C Nuclear Magnetic Resonance, Fourier Transform Infrared Spectroscopy and Raman spectroscopy. In addition, the glycoconjugates were characterized by fluorescence lectin-binding analysis. The acid soluble EPS is α-(1 → 4) linked polysaccharide, containing both glucose and galactose as monomers. There are OCH₃ groups connected to the glucose monomer. Transmission and scanning electron microscopy (TEM, SEM) as well as confocal laser scanning microscopy (CLSM) showed that the acid soluble EPS was present as a tightly bound capsular EPS around bacterial cells ordered into a sarcinae-like growth pattern. The special granule morphology is decided by the acid soluble EPS produced by Defluviicoccus Cluster II organisms. This work shows that no single one method can be used to extract all possible extracellular polymeric substances. Results obtained here can support the elucidation of biofilm formation and structure in future research.

Microstructure of anammox granules and mechanisms endowing their intensity revealed by microscopic inspection and rheometry

The anammox process represents a sustainable and cost-effective technique for nitrogen removal from wastewater, where granulation of anammox bacteria could be of great benefit to the system performance. However, knowledge of the specific properties of anammox granules is currently unsatisfactory. In this study, the organization of anammox granules was comprehensively studied from macro to micro scale with a range of microscale techniques. Scanning and transmission electron microscopy and multiple fluorescence labeling combined with confocal laser scanning microscopy were included. Simultaneously, the associated mechanical properties were studied in-depth by rheometry in combination with selective enzymatic hydrolysis. Anammox granules follow a tertiary organization regime, where interactions between individual anammox bacteria made up the primary base, then, the grouping of anammox bacterial cells encapsulated within a thin extracellular polymeric substance (EPS) layer comprised a second arrangement level, and, finally, the cementing of these groups together with other bacteria and polymers gave rise to compact aggregates. α-Polysaccharides and proteins were considered the backbones of anammox granules, contributing greatly to their excellent intensity. β-Polysaccharides concentrated at the outer rims of anammox granules and combined with other macromolecules to form a buffer zone or protective barrier, beneath which anammox bacteria proliferated. Divalent cationic bridging for EPS binding was prevalent and of great significance within the dense anammox granules, while there was also much weak monovalent ionic interaction. The specific organization and composition of anammox granules endows them with excellent intensity and integrity, which can be of importance for full-scale reactor operations where diverse shocks can be expected.

Seawater-based wastewater accelerates development of aerobic granular sludge: A laboratory proof-of-concept

This study aimed to develop an aerobic granular sludge process for the efficient treatment of highly saline wastewater and understand the granulation process in a seawater-based multi-ion matrix. Five identical sequencing batch airlift reactors (SBARs) are used to treat synthetic saline sewage with different proportions of real seawater (0%-100%). The results confirm that aerobic granular sludge can be successfully developed with various proportions of seawater up to 100% and show that seawater not only significantly accelerates granulation but also generates stronger granular structures than does freshwater. The increased presence of gel-forming alginate-like exopolysaccharides in the granules explains why a greater proportion of seawater leads to higher density and improves the cohesive strength of the granules. SEM-EDX analysis further revealed substantial presence of both Ca²⁺ and Mg²⁺ phosphate in the granule core as well as in the outer layers providing extra bridging forces in addition to alginate-like exopolysaccharides for accelerating the granule formation and maintaining the structure. It is hoped that this work could explore another approach for saline sewage treatment and bring some clues for the mystery of granulation mechanism.

Start-up of sequencing batch reactor with Thiosphaera pantotropha for treatment of high-strength nitrogenous wastewater and sludge characterization

Biological treatment of high-strength nitrogenous wastewater is challenging due to low growth rate of autotrophic nitrifiers. This study reports bioaugmentation of Thiosphaera pantotropha capable of simultaneously performing heterotrophic nitrification and aerobic denitrification (SND) in sequencing batch reactors (SBRs). SBRs fed with 1:1 organic-nitrogen (N) and NH₄⁺-N were started up with activated sludge and T. pantotropha by gradual increase in N concentration. Sludge bulking problems initially observed could be overcome through improved aeration and mixing and change in carbon source. N removal decreased with increase in initial nitrogen concentration, and only 50-60 % removal could be achieved at the highest N concentration of 1000 mg L^-1 at 12-h cycle time. SND accounted for 28 % nitrogen loss. Reducing the settling time to 5-10 min and addition of divalent metal ions gradually improved the settling characteristics of sludge. Sludge aggregates of 0.05-0.2 mm diameter, much smaller than typical aerobic granules, were formed and progressive increase in settling velocity, specific gravity, Ca²⁺, Mg²⁺, protein, and polysaccharides was observed over time. Granulation facilitated total nitrogen (TN) removal at a constant rate over the entire 12-h cycle and thus increased TN removal up to 70 %. Concentrations of NO₂^--N and NO₃^--N were consistently low indicating effective denitrification. Nitrogen removal was possibly limited by urea hydrolysis/nitrification. Presence of T. pantotropha in the SBRs was confirmed through biochemical tests and 16S rDNA analysis.

Extraction of Structural Extracellular Polymeric Substances from Aerobic Granular Sludge

To evaluate and develop methodologies for the extraction of gel-forming extracellular polymeric substances (EPS), EPS from aerobic granular sludge (AGS) was extracted using six different methods (centrifugation, sonication, ethylenediaminetetraacetic acid (EDTA), formamide with sodium hydroxide (NaOH), formaldehyde with NaOH and sodium carbonate (Na₂CO₃) with heat and constant mixing). AGS was collected from a pilot wastewater treatment reactor. The ionic gel-forming property of the extracted EPS of the six different extraction methods was tested with calcium ions (Ca²⁺). From the six extraction methods used, only the Na₂CO₃ extraction could solubilize the hydrogel matrix of AGS. The alginate-like extracellular polymers (ALE) recovered with this method formed ionic gel beads with Ca²⁺. The Ca²⁺-ALE beads were stable in EDTA, formamide with NaOH and formaldehyde with NaOH, indicating that ALE are one part of the structural polymers in EPS. It is recommended to use an extraction method that combines physical and chemical treatment to solubilize AGS and extract structural EPS.

Rheological properties of sewage sludge during enhanced anaerobic digestion with microwave-H2O2 pretreatment

The rheological behavior of sludge is of serious concern in anaerobic digestion. This study investigated the rheological properties of sewage sludge during enhanced anaerobic digestion with microwave-H2O2 pretreatment (MW-H2O2). The results showed that MW-H2O2 pretreatment resulted in the improvement of sludge flowability and weakening of its viscoelastic properties. Further positive effects on the rheological properties of digested sludge during anaerobic digestion were observed. The flowability was improved with a low level of apparent viscosity. The decrease of the consistency index and increase of the flow behavior index indicated that the strength of the inner structures and non-Newtonian flow characteristics of digested sludge weakened. Both the storage modulus (G') and loss modulus (G″) decreased, indicating that the viscoelastic behavior became weak. These effects were possibly attributed to the changes of the digested sludge micro-structures, such as extracellular polymeric substances (EPS). This study concluded that anaerobic digestion for treating sewage sludge combined with pretreatment is a more favorable option than single anaerobic digestion from the perspective of rheology.