Comparative study of two MIP-based electrochemical sensors for selective detection and quantification of the antiretroviral drug lopinavir in human serum

Thermal polymerization (TP) and electropolymerization (EP) are the two methods used in this study to explore the molecular imprinting process. To detect the antiviral medication lopinavir (LPV), an inhibitor of enzyme HIV-1 protease that is co-formulated with ritonavir (RTV) to extend its half-life in the body, with greater precision, these methods were merged with an electrochemical sensor. The sensors were created on glassy carbon electrodes (GCE) based on molecularly imprinted polymers (MIP) using TP with methacrylic acid (MAA) functional monomer and EP with p-aminobenzoic acid (PABA) functional monomer. Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and electrochemical methods were utilized to examine the technical features of the suggested sensors. For both approaches, the necessary optimization investigations were carried out. Different LPV concentrations, ranging from 1.0 pM to 17.5 pM in drug solution and commercial human serum samples, were used to validate the analytical efficiency of the two sensors and compare their electroanalytical behaviour. For TP-LPV@MIP/GCE and EP-LPV@MIP/GCE, the corresponding limit of detection (LOD) was 2.68 × 10-13 M (0.169 pg mL-1) and 1.79 × 10-13 M (0.113 pg mL-1) in standard solutions, and 2.87 × 10-13 M (0.180 pg mL-1) and 2.91 × 10-13 M (0.183 pg mL-1) in serum samples. For the measurement of LPV in tablet form and serum samples, the proposed TP-LPV@MIP/GCE and EP-LPV@MIP/GCE sensors provide good recovery, demonstrating 99.85-101.16 % and 100.36-100.97 % recovery, respectively. The imprinting factor was utilized to demonstrate the selectivity of the suggested sensors by utilizing several anti-viral drugs that are structurally comparable to LPV. Additionally, the constructed sensors were examined for the potential impacts of interferences and the stability during the storage.

Preparation of nanoparticle and nanoemulsion formulations containing repaglinide and determination of pharmacokinetic parameters in rats

Repaglinide (RPG) belongs to the class of drugs known as meglitinides and is used for improving and maintaining glycemic control in the treatment of patients with Type 2 diabetes. RPG is a Class II drug (BCS) because of its high permeability and low water solubility. It also undergoes hepatic first-pass metabolism. The oral bioavailability of RPG is low (about 56 %) due to these drawbacks. Our aim in this study is to prepare two different nano-sized drug carrier systems containing RPG (nanoparticle: RPG-PLGA-Zein-NPs or nanoemulsion: RPG-NE) and to carry out a pharmacokinetic study for these formulations. We prepared NPs using PLGA and Zein. In addition, a single NE formulation was developed using Tween 80 and Pluronic F68 as surfactants and Labrasol as co-surfactant. The droplet size values of the blank-NE and RPG-NE formulations were found to be less than 120 nm. The mean particle sizes of blank-Zein-PLGA-NPs and RPG-Zein-PLGA-NPs were less than 260 nm. The Cmax and tmax values of RPG-Zein-PLGA-NPs and RPG-NE (523 ± 65 ng/mL and 770 ± 91 ng/mL; 1.41 ± 0.46 h and 1.61 ± 0.37 h, respectively) were meaningfully higher than those of free RPG (280 ± 33 ng/mL; 0.72 ± 0.28 h) (p < 0.05). The AUC0-∞ values calculated for RPG-Zein-PLGA-NPs and RPG-NE were approximately 4.04 and 5.05 times higher than that calculated for free RPG. These nanosized drug delivery systems were useful in increasing the oral bioavailability of RPG. Moreover, the NE formulation was more effective than the NP formulation in improving the oral bioavailability of RPG (p < 0.05).

Validation of a bioanalytical HPLC-UV method to quantify Α-Bisabolol in rat plasma applied to pharmacokinetic pilot study with the drug nanoemulsion

α-Bisabolol (α-BIS) is a sesquiterpene alcohol present in chamomile essential oil [Chamomilla recutita (L.) Rauschert]. Despite its numerous pharmacological effects, its pharmacokinetics remain understudied. An analytical method capable of quantifying α-BIS in plasma is crucial to enable pharmacokinetic analysis. Presently, only one study has quantified it using mass spectrometry. Administering α-BIS requires a nanoemulsion for intravenous injection. This study aimed to develop and validate a bioanalytical method using high-performance liquid chromatography with an ultraviolet detector to quantify α-BIS in rat plasma. The method employed acetonitrile and ultrapure water (80:20, v/v) as the mobile phase, with a flow rate of 1 ml/min and concentrations ranging from 465 to 29.625 μg/ml. All US Food and Drug Administration-designated assays were successful, indicating the method's precision, accuracy, sensitivity and linearity in determining α-BIS in rat plasma. The developed nanoemulsion, assessed through dynamic light scattering analysis, the ensemble collection of particles and polydispersity index evaluation, proved safe and effective for intravenous administration. The pharmacokinetic parameters such as volume of distribution, clearance and half-life indicated that α-BIS tends to persist in the body. This study provides a foundation for further research to explore α-BIS's potential pharmaceutical applications in the future.

Determination of Pralsetinib in Human Plasma and Cerebrospinal Fluid for Therapeutic Drug Monitoring by Ultra-performance Liquid Chromatography-Tandem Mass Spectrometry (UPLC-MS/MS)

BACKGROUND

Ultra-performance Liquid Chromatography-tandem Mass Spectrometry (UPLC-MS/MS) is widely used for concentration detection of many Tyrosine Kinase Inhibitors (TKIs), including afatinib, crizotinib, and osimertinib. In order to analyze whether pralsetinib takes effect in Rearranged during Transfection (RET)-positive patients with central nervous system metastasis, we aimed to develop a method for the detection of pralsetinib concentrations in human plasma and Cerebrospinal Fluid (CSF) by UPLC-MS/MS.

METHODS

The method was developed using the external standard method, and method validation included precision, accuracy, stability, extraction recovery, and matrix effect. Working solutions were all obtained based on stock solutions of pralsetinib of 1mg/mL. The plasma/CSF samples were precipitated by acetonitrile for protein precipitation and then separated on an ACQUITY UPLC HSS T3 column (2.1×100 mm, 1.8 μm) with a gradient elution using 0.1% formic acid (solution A) and acetonitrile (solution B) as mobile phases at a flow rate of 0.4 mL/min. The tandem mass spectrometry was performed by a triple quadrupole linear ion trap mass spectrometry system (QTRAPTM 6500+) with an electrospray ion (ESI) source and Analyst 1.7.2 data acquisition system. Data were collected in Multiple Reaction Monitoring (MRM) and positive ionization mode.

RESULTS

A good linear relationship of pralsetinib in both plasma and CSF was successfully established, and the calibration ranges were found to be 1.0-64.0 μg/mL and 50.0ng/mL-12.8 μg/mL for pralsetinib in the plasma and CSF, respectively. Validation was performed, including calibration assessment, selectivity, precision, accuracy, matrix effect, extraction recovery, and stability, and all results have been found to be acceptable. The method has been successfully applied to pralsetinib concentration detection in a clinical sample, and the concentrations have been found to be 475 ng/mL and 61.55 μg/mL in the CSF and plasma, respectively.

CONCLUSION

We have developed a quick and effective method for concentration detection in both plasma and CSF, and it can be applied for drug monitoring in clinical practice. The method can also provide a reference for further optimization.

Assessment of Pharmacokinetic Parameters of Daidzein-Containing Nanosuspension and Nanoemulsion Formulations After Oral Administration to Rats

BACKGROUND AND OBJECTIVES

Daidzein has several biological effects such as antioxidation, anti-inflammation, chemoprevention, and anticancer effects. The aim of this study was to evaluate the impact of nano-formulations (nanoemulsion-NE and nanosuspension-NS) prepared to increase the oral bioavailability of daidzein, a poorly water-soluble isoflavone, on the pharmacokinetic parameters of daidzein in rats.

METHODS

A high-performance liquid chromatography-ultraviolet (HPLC-UV) method was successfully developed for daidzein analysis in rat plasma. The pharmacokinetics studies of the nano-sized formulations, compared to coarse daidzein suspension, were carried out in the rats by a single oral dose at 10 mg/kg (n = 6/group). Area under the plasma concentration-time curve from time zero to extrapolation to time infinity (AUC_0-∞), maximum plasma concentration (C_max), time to reach maximum plasma concentration (t_max), and elimination half life (t_1/2) values for coarse daidzein suspension, daidzein-NS, and daidzein-NE were estimated by a non-compartmental analysis.

RESULTS

The AUC values of daidzein-NE and daidzein-NS were approximately 2.62 and 2.65 times higher than that of coarse daidzein suspension, respectively (p < 0.05). Relative bioavailability (F_rel) (%) values of daidzein following oral administration of nanosuspension or nanoemulsion formulations were about 265.6% and 262.3%, respectively.

CONCLUSION

It revealed that nanoscale size is an important factor to overcome any dissolution rate barriers to oral bioavailability of the low water-soluble compound. Nanoemulsion and nanosuspension formulations are beneficial dosage forms to increase the oral bioavailability of Biopharmaceutical Classification System (BCS) Class II and Class IV compounds.

Combining subsidiary and synchronous approaches for concurrent spectrofluorimetric assurance of lopinavir and ritonavir in tablets utilized in convention for treatment of coronavirus infection (COVID-19) and biological fluids

In this think about, assurance of lopinavir and ritonavir down to organic concentration level has been carried out. The assurance is based on expanding the selectivity of the spectrofluorimetric procedure by combining both subordinate and synchronous spectrofluorimetric approaches, which allow effective estimation of lopinavir at 248.8 nm and ritonavir at 300.1 nm within the nearness of each other at Δλ of 60 nm. Worldwide Conference on Harmonization approval rules were taken after to completely approve the strategy, and linearity was gotten for the two drugs over the extend of 0.4-2.4 µg mL^-1 for Lopinavir and 0.1-0.6 µg mL^-1 for ritonavir. Application of of the strategy was successfully carried out within the commercial tablets with great understanding with the comparison strategies. As the detection limits were down to 0.133 and 0.022 µg mL^-1 and quantitation limits were 0.395 and 0.068 µg mL^-1 for lopinavir and ritonavir, individually; the in vivo assurance of lopinavir and ritonavir in spiked plasma tests was pertinent. The rate recuperations in natural tests were 99.10 ± 0.77 and 99.54 ± 0.60 for lopinavir and ritonavir, individually. Water was utilized as the ideal weakening dissolvable within the proposed strategy which includes an eco-friendly justify.