A Gold Nanoparticle-Based Fluorescence Turn-On Probe for Highly Sensitive Detection of Polyamines

Pillar[n]arene-Based Fluorescence Turn-On Chemosensors for the Detection of Spermine, Spermidine, and Cadaverine in Saline Media and Biofluids

Polyamines are essential analytes due to their critical role in various biological processes and human health in general. Due to their role as regulators for cell growth and proliferation (putrescine and spermine), as neuroprotectors, gero-, and cardiovascular protectors (spermidine), and as bacterial growth indicators (cadaverine), rapid, simple, and cost-effective methods for polyamine detection in biofluids are in demand. The present study focuses on the development and investigation of self-assembled and fluorescent host⋅dye chemo-sensors based on sulfonated pillar[5]arene for the specific detection of polyamines. Binding studies, as well as stability and functionality assessments of the turn-on chemosensors for selective polyamine detection in saline and biologically relevant media, are shown. Furthermore, the practical applicability of the developed chemo-sensors is demonstrated in biofluids such as human urine and saliva.

A novel fluorescent probe of alkyne compounds for putrescine detection based on click reaction

Putrescine is a toxic biogenic amine produced in the process of food spoilage, and a high concentration of biogenic amines in foods will cause health problems such as abnormal blood pressure, headaches and tachycardia asthma/worsening asthma. The detection of putrescine is necessary. However, traditional putrescine detection requires specialized instruments and complex operations. To detect putrescine quickly, sensitively and accurately, we designed and successfully prepared a fluorescent probe (DPY) with active alkynyl groups. DPY takes p-dimethoxybenzene as the raw material, adding a highly active alkyne group. It is stable in experimental pH (∼7) because the UV-vis absorption and fluorescence emission spectra in pH = 3-12 have little change. The fluorescence intensity of DPY decreased only about 1% under the irradiation of 420 nm within 2 h, showing its better photostability. DPY has a high selectivity to putrescine because of the amino-alkyne click reaction without any catalyst in presence of different biogenic amines. The obvious response to putrescine was found in 30 seconds at room temperature. The mechanism between DPY and putrescine was investigated before and after adding putrescine by 1H NMR spectra and the Job plot. The results indicated a typical 1 : 1 stoichiometry between the DPY and DAB. Furthermore, the higher sensitivity of DPY to putrescine was obtained with the detection of limit (LOD) of 3.19 × 10-7 mol L-1, which was better than that of the national standard (2.27 × 10-5 mol L-1). The novel fluorescent probe was successfully applied to beer samples to detect putrescine. The proposed strategy is expected to provide some guidance for the development of some new ways to detect food security.

Recent Advances in Fluorescent Methods for Polyamine Detection and the Polyamine Suppressing Strategy in Tumor Treatment

The biogenic aliphatic polyamines (spermine, spermidine, and putrescine) are responsible for numerous cell functions, including cell proliferation, the stabilization of nucleic acid conformations, cell division, homeostasis, gene expression, and protein synthesis in living organisms. The change of polyamine concentrations in the urine or blood is usually related to the presence of malignant tumors and is regarded as a biomarker for the early diagnosis of cancer. Therefore, the detection of polyamine levels in physiological fluids can provide valuable information in terms of cancer diagnosis and in monitoring therapeutic effects. In this review, we summarize the recent advances in fluorescent methods for polyamine detection (supramolecular fluorescent sensing systems, fluorescent probes based on the chromophore reaction, fluorescent small molecules, and fluorescent nanoparticles). In addition, tumor polyamine-suppressing strategies (such as polyamine conjugate, polyamine analogs, combinations that target multiple components, spermine-responsive supramolecular chemotherapy, a combination of polyamine consumption and photodynamic therapy, etc.) are highlighted. We hope that this review promotes the development of more efficient polyamine detection methods and provides a comprehensive understanding of polyamine-based tumor suppressor strategies.

Molecular Probes, Chemosensors, and Nanosensors for Optical Detection of Biorelevant Molecules and Ions in Aqueous Media and Biofluids

Synthetic molecular probes, chemosensors, and nanosensors used in combination with innovative assay protocols hold great potential for the development of robust, low-cost, and fast-responding sensors that are applicable in biofluids (urine, blood, and saliva). Particularly, the development of sensors for metabolites, neurotransmitters, drugs, and inorganic ions is highly desirable due to a lack of suitable biosensors. In addition, the monitoring and analysis of metabolic and signaling networks in cells and organisms by optical probes and chemosensors is becoming increasingly important in molecular biology and medicine. Thus, new perspectives for personalized diagnostics, theranostics, and biochemical/medical research will be unlocked when standing limitations of artificial binders and receptors are overcome. In this review, we survey synthetic sensing systems that have promising (future) application potential for the detection of small molecules, cations, and anions in aqueous media and biofluids. Special attention was given to sensing systems that provide a readily measurable optical signal through dynamic covalent chemistry, supramolecular host-guest interactions, or nanoparticles featuring plasmonic effects. This review shall also enable the reader to evaluate the current performance of molecular probes, chemosensors, and nanosensors in terms of sensitivity and selectivity with respect to practical requirement, and thereby inspiring new ideas for the development of further advanced systems.

Supramolecular imaging of spermine in cancer cells

As an important biomarker, the overexpressed spermine has been widely investigated for cancer diagnosis and treatment. However, bioimaging of spermine in living cells is still a formidable challenge. Herein, we design a supramolecular imaging ensemble for spermine by the host-guest complexation of amphiphilic sulfonatocalix[5]arene (SC5A12C) assembly with lucigenin (LCG). Strong binding ability and complexation-induced fluorescence quenching properties enable SC5A12C to quench the fluorescence of LCG dramatically and to recover it completely due to the competition of overexpressed spermine in cancer cells. SC5A12C also exhibits excellent biocompatibility and promotes cellular uptake due to its ability to form ultra-stable assembly. Co-assembling folate further promotes the cellular uptake of folate receptor overexpressed cancer cells, contributing to enhanced bioimaging.

Tailoring the Solid-State Fluorescence of BODIPY by Supramolecular Assembly with Polyoxometalates

A cationic boron dipyrromethene (BODIPY) derivative (1⁺) has been successfully combined with two polyoxometalates (POMs), the Lindqvist-type [W₆O₁₉]^2- and the β-[Mo₈O₂₆]^4- units, into three new supramolecular fluorescent materials (1)₂[W₆O₁₉]·2CH₃CN, (1)₂[W₆O₁₉], and (1)₄[Mo₈O₂₆]·DMF·H₂O. The resulting hybrid compounds have been fully characterized by a combination of single-crystal X-ray diffraction, IR and UV-vis spectroscopies, and photoluminescence analyses. This self-assembly approach prevents any π-π stacking interactions not only between the BODIPY units, responsible for aggregation-caused quenching (ACQ) effects, but also between the BODIPY and the POMs, avoiding intermolecular charge-transfer effects. Noticeably, the POM units do not only act as bulky spacers, but their negative charge density drives the molecular arrangement of the 1⁺ luminophore, strongly modifying its fluorescence in the solid state. As a consequence, the 1⁺ cations are organized into dimers in (1)₂[W₆O₁₉]·2CH₃CN and (1)₂[W₆O₁₉], which are weakly emissive at room temperature, and in a more compact layered assembly in (1)₄[Mo₈O₂₆]·DMF·H₂O, which exhibits a red-shifted and intense emission upon similar photoexcitation.

A sensitive fluorometric bio-barcodes immunoassay for detection of triazophos residue in agricultural products and water samples by iterative cycles of DNA-RNA hybridization and dissociation of fluorophores by Ribonuclease H

Although the toxicity of triazophos is high and it has been pulled from the market in many countries; it is still widely used and frequently detected in agricultural products. While conventional analyses have been routinely used for the quantification and monitoring of triazophos residues, those for detecting low residual levels are deemed necessary. Therefore, we developed a novel and sensitive fluorometric signal amplification immunoassay employing bio-barcodes for the quantitative analysis of triazophos residues in foodstuffs and surface water. Herein, monoclonal antibodies (mAbs) attached to gold nanoparticles (AuNPs) were coated with DNA oligonucleotides (used as a signal generator), and a complementary fluorogenic RNA was used for signal amplification. The system generated detection signals through DNA-RNA hybridization and subsequent dissociation of fluorophores by Ribonuclease H (RNase H). It has to be noted that RNase H can only disintegrate the RNA in DNA-RNA duplex, but not cleave single or double-stranded DNA. Hence, with iterative cycles of DNA-RNA hybridization, sufficient strong signal was obtained for reliable detection of residues. Furthermore, this method enables quantitative detection of triazophos residues through fluorescence intensity measurements. The competitive immunoassay shows a wide linear range of 0.01-100 ng/mL with a limit of detection (LOD) of 0.0032 ng/mL. The assay substantially meets the demand for the low residue detection of triazophos residues in agricultural products and water samples. Accuracy (expressed as spiked recovery %) and coefficient of variation (CV) were ranged from 73.4% to 116% and 7.04% to 17.4%, respectively. The proposed bio-barcodes immunoassay has the advantages of being stable, reproducible, and reliable for residue detection. In sum, the present study provides a novel approach for detection of small molecules in various sample matrices.

Perylene diimide-Cu2+ based fluorescent nanoparticles for the detection of spermine in clinical and food samples: a step toward the development of a diagnostic kit as a POCT tool for spermine

The sustainable development of point-of-care testing (POCT) for spermine detection is important to check for food spoilage, early diagnosis of various malignancies and diminished anticonvulsant drug carbamazepine response in chronic epilepsy. Herein, the synthesis, characterization and spectroscopic properties of perylene diimide EA-PDI∩Cu²⁺ complex based nanoparticles towards spermine were studied in detail. This EA-PDI∩Cu²⁺ complex can be used for the ultrasensitive detection of spermine as low as 86.3 nM (UV-vis) and 90 pM (fluorescence) in aqueous medium, in urine and blood serum samples (recovery 99 ± 3) and in the solid state (0.1 μg L^-1), and EA-PDI shows minimal cytotoxicity to cells and can easily enter into Human Osteosarcoma MG-63 cells for bio-imaging of Cu²⁺ and spermine. This EA-PDI∩Cu²⁺ complex can be established as a cost-effective method to develop a diagnostic kit for POCT of spermine in terms of a solution-based test kit for real time detection of spermine in vapor and solution form released from fermented food samples.

Biomimetic systems trigger a benzothiazole based molecular switch to 'turn on' fluorescence

Molecular switches are valuable tools for the detection of many chemical and biological processes. On the other hand, Schiff bases are known for their simplicity in synthesis and their enormous biochemical applications. In this scenario, when a strategically designed Schiff base acts as a molecular switch in biomimetic environments drags inevitable attention. In this article, we hereby demonstrate an interesting behavior of a strategically designed bioactive benzothiazole based Schiff base (E)-2-(((6-chlorobenzo[d]thiazol-2-ylimino)methyl)-5-diethylamino) phenol (CBMDP) whose fluorescence characteristics dramatically modulate as consequence of its structural modification in aqueous and biomimetic environments individually. Electronic absorption, steady state and time resolved fluorescence spectroscopic techniques along with DFT based quantum chemical calculation evidence that in pure organic solvents CBMDP exists in highly fluorescent enol-imine (N) form which transform into feebly fluorescent hydrated species (H) in bulk aqueous media. Contrariwise, on interaction with the ionic and non-ionic micellar media or with liposome, a structural restoration occurs from less fluorescent hydrated (H) species into a highly fluorescent normal (N) one. This molecular flipping of the title compound upon micellar compartmentalization is possibly caused by the micropolarity of the local environment and further supported by its spectral behavior in different polarity gradient solvent mixture of water-dioxane (protic-aprotic) and water-methanol (protic -protic). Usually, Schiff bases are prone to hydrolysis in aqueous media, interestingly, the structural framework of this strategically designed molecule only allow the first step of hydrolysis, which is hydration of azomethine linkage whereas it withstand the second step, and that possibly helps the structural restoration process. Hence the article described herein may emphasize how a systematically designed Schiff base framework can be used as 'turn off- turn on' fluorescent molecular switch which may be extremely useful for its applications in the area of biochemical sensors.

Analyte-directed formation of emissive excimers for the selective detection of polyamines

A convenient and selective method for the sensing of polyamines, which are important biomarkers for cancers, has been developed. The fluorescence light-up mechanism utilizes the analyte-induced formation of emissive excimers of a sulfonated probe. Detection is achieved in aqueous media and artificial urine samples, as indicated by an excellent fluorescence turn-on signal with a large spectral shift.

A novel self-assembled platform for the ratiometric fluorescence detection of spermine

A novel self-assembled platform where the micelles of a pyrene derivative act as the shell and squaraine (SQ) as the nucleus was constructed for the ratiometric near infrared (NIR) fluorescence detection of urinary spermine with high selectivity.

Fluorescence turn-on detection of mercury ions based on the controlled adsorption of a perylene probe onto the gold nanoparticles

A novel fluorescence turn-on strategy based on Au nanoparticles and a perylene probe for the sensing of Hg(2+) ions has been developed. It was observed that a perylene probe could be adsorbed onto the surface of Au NPs through strong electrostatic and hydrophobic interactions. Its fluorescence was efficiently quenched by the Au nanoparticles. However, in the presence of Hg(2+) and NaBH4, Hg(2+) was reduced and an Au/Hg amalgam was formed on the surface of the Au nanoparticles. The perylene probe could hardly be adsorbed and quenched by the Au/Hg amalgam. A turn on fluorescence signal was therefore detected. The assay is quite sensitive, and 5 nM Hg(2+) could be easily detected. It is also very selective, a number of metal ions were tested and no noticeable interference was observed. The assay was also successfully applied for the determination of Hg(2+) in lake water samples. A simple, fast, inexpensive, highly sensitive and selective Hg(2+) sensing strategy is therefore established.

Spermine detection via metal-mediated ethynylarene 'turn-on' fluorescence signaling

A dicarboxylated ethynylarene was shown to behave as a fluorescent chemosensor for millimolar concentrations of polyamines when mixed with Cd(II), Pb(II) or Zn(II) ions at micromolar concentrations. A bathochromic shift and intensification of fluorescence emission was observed with increasing amounts of metal ion in the presence of aqueous polyamines buffered at pH = 7.6. Such perturbations manifested as 'turn-on' signals from a ratiometric comparison of emission intensities at 390 nm versus 340 nm. Using Pb(II) as the metal mediator, spermine was selectively detected as a 40-fold signal enhancement relative to spermidine, putrescine, cadaverine and several other non-biogenic diamines. Evaluation of additional triamine and tetraamine analytes showed the influence that amine group quantity and spacing had on signal generation. By increasing the ratio of Pb(II) relative to ethynylarene, the detection limit for spermine was successfully lowered to a 25 micromolar level. Noncovalent association between ethynylarene, metal ion and polyamine are believed to promote the observed spectroscopic changes. This study exploits the subtle impact that polyamine structural identity has on transition metal chelation to define a new approach towards polyamine chemosensor development.

Amine oxidase-based biosensors for spermine and spermidine determination

The present work describes the development and optimization of electrochemical biosensors for specific determination of the biogenic polyamine spermine (Spm) and spermidine (Spmd) whose assessment represents a novel important analytical tool in food analysis and human diagnostics. These biosensors have been prepared using novel engineered enzymes: polyamine oxidase (PAO) endowed with selectivity towards Spm and Spmd and spermine oxidase (SMO) characterized by strict specificity towards Spm. The current design entails biosensors in which the enzymes were entrapped in poly(vinyl alcohol) bearing styrylpyridinium groups (PVA-SbQ), a photocrosslinkable gel, onto an electrode surface. Screen-printed electrodes (SPEs) were used as electrochemical transducers for enzymatically produced hydrogen peroxide, operating at different potential vs Ag/AgCl according to the material of the working electrode (WE): +700 mV for graphite (GP) or -100 mV for Prussian blue (PB)-modified SPE, respectively. Biosensor performances were evaluated by means of flow injection amperometric (FIA) measurements. The modified electrodes showed good sensitivity, long-term stability and reproducibility. Under optimal conditions, the PAO biosensor showed a linear range 0.003-0.3 mM for Spm and 0.01-0.4 mM for Spmd, while with the SMO biosensor, a linear range of 0.004-0.5 mM for Spm has been obtained. The main kinetic parameters apparent Michaelis constant (K M), turnover number (K cat) and steady-state current (I max) were determined. The proposed device was then applied to the determination of biogenic amines in blood samples. The results obtained were in good agreement with those obtained with the GC-MS reference method.

Gold nanoparticle-based fluorescent “turn-on” sensing system for the selective detection of mercury ions in aqueous solution

A simple and straightforward fluorometric assay using dye-adsorbed gold nanoparticles (AuNPs) was used in the highly selective and sensitive detection of mercury ions in aqueous buffer solution.

Solvatochromic fluorescent BODIPY derivative as imaging agent in camptothecin loaded hexosomes for possible theranostic applications

Tumor cell-targeted hexosomes simultaneously loaded with pyrene-modified BODIPY and camptothecin are easily internalized by HeLa cells.

Optical reading of contaminants in aqueous media based on gold nanoparticles

With increasing trends of global population growth, urbanization, pollution over-exploitation, and climate change, the safe water supply has become a global issue and is threatening our society in terms of sustainable development. Therefore, there is a growing need for a water-monitoring platform with the capability of rapidness, specificity, low-cost, and robustness. This review summarizes the recent developments in the design and application of gold nanoparticles (AuNPs) based optical assays to detect contaminants in aqueous media with a high performance. First, a brief discussion on the correlation between the optical reading strategy and the optical properties of AuNPs is presented. Then, we summarize the principle behind AuNP-based optical assays to detect different contaminants, such as toxic metal ion, anion, and pesticides, according to different optical reading strategies: colorimetry, scattering, and fluorescence. Finally, the comparison of these assays and the outlook of AuNP-based optical detection are discussed.

Sensitive and selective plasmonic assay for spermine as biomarker in human urine

A simple, fast, and highly selective and sensitive colorimetric assay to detect nanomolar levels of spermine in human urine (healthy donors, cancer patients) is reported. This assay is based on the absence of a competitive organic capping on the gold nanoparticles together with the high affinity of the amine groups of the analyte for the nanoparticle surface.

A designer peptide as a template for growing Au nanoclusters

A peptide was designed to generate a sub-nanometric template that guides the growth of fluorescent gold nanoclusters.

Design and syntheses of novel fluorescent organosilicon-based chemosensors through click silylation: detection of biogenic amines

First report on the use of organosilicon-based chemosensors for the recognition of biogenic amines.

Fluorometric/colorimetric logic gates based on BODIPY-functionalized mesoporous silica

We have demonstrated that metal ions acting as modulators in BODIPY-functionalized SiO₂ nanoparticles can generate absorbance changes in accordance with the operation of a half-adder digital circuit.

Exploring and exploiting the synergy of non-covalent interactions on the surface of gold nanoparticles for fluorescent turn-on sensing of bacterial lipopolysaccharide

The sensing of lipopolysaccharide (LPS) relies on the synergy of multiple electrostatic and hydrophobic interactions between LPS and the sensor. However, how non-covalent interactions are coordinated to impel the recognition process still remains elusive, and the exploration of which would promote the development of LPS sensors with higher specificity and sensitivity. In this work, we hypothesize that Au NPs would provide a straightforward and flexible platform for studying the synergy of non-covalent interactions. The detailed mechanism of interactions between the designed fluorescent probes and Au NPs with two distinct surface properties was systematically explored. We demonstrated that only when the electrostatic attraction and hydrophobic stacking are both present, the binding of fluorescent probes onto Au NPs can be not only highly efficient, but also positively cooperative. After that, hybrid systems that consist of Au NPs and surface-assembled fluorescent probes were exploited for fluorescent turn-on sensing of LPS. The results show that the sensitivity and selectivity to LPS relies strongly on the binding affinity between fluorescent probes and Au NPs. Fluorescent probes assembled Au NPs thus provide an attractive platform for further optimization of the sensitivity/selectivity of LPS sensing.

A PEGylated fluorescent turn-on sensor for detecting fluoride ions in totally aqueous media and its imaging in live cells

Owing to the considerable significance of fluoride anions for health and environmental issues, it is of great importance to develop methods that can rapidly, sensitively and selectively detect the fluoride anion in aqueous media and biological samples. Herein, we demonstrate a robust fluorescent turn-on sensor for detecting the fluoride ion in a totally aqueous solution. In this study, a biocompatible hydrophilic polymer poly(ethylene glycol) (PEG) is incorporated into the sensing system to ensure water solubility and to enhance biocompatibility. tert-Butyldiphenylsilyl (TBDPS) groups were then covalently introduced onto the fluorescein moiety, which effectively quenched the fluorescence of the sensor. Upon addition of fluoride ion, the selective fluoride-mediated cleavage of the Si-O bond leads to the recovery of the fluorescein moiety, resulting in a dramatic increase in fluorescence intensity under visible light excitation. The sensor is responsive and highly selective for the fluoride anion over other common anions; it also exhibits a very low detection limit of 19 ppb. In addition, this sensor is operative in some real samples such as running water, urine, and serum and can accurately detect fluoride ions in these samples. The cytotoxicity of the sensor was determined to be Grade I toxicity according to United States Pharmacopoeia and ISO 10993-5, suggesting the very low cytotoxicity of the sensor. Moreover, it was found that the senor could be readily internalized by both HeLa and L929 cells and the sensor could be utilized to track fluoride level changes inside the cells.

Fluorescence sensing of spermine with a frustrated amphiphile

A charge-frustrated amphiphile composed of a pyrene-1,3,6-trisulfonate head group and an eicosane side chain can be used as a fluorescence chemosensor for spermine. The sensor allows the detection of spermine down to the nanomolar concentration range with good selectivity over closely related biogenic amines such as spermidine.