Thin silica shell on Ag3PO4 nanoparticles augments stability and photocatalytic reusability

Semiconductor photocatalysts are promising cost-effective materials for degrading hazardous organic contaminants in water. Ag3PO4 is an efficient visible-light photocatalyst for the oxidation of water and dye degradation. The excited Ag3PO4 photocatalyst uses a hole to oxidise water or organic contaminants except the electron, which reduces Ag+ to Ag0. In the present study, the inherited disadvantage was overcome by a thin silica shell overcoating on Ag3PO4 nanoparticles. The silica-coated Ag3PO4 nanoparticles retain the photocatalytic activity even after five cycles of photodegradation, while the bare Ag3PO4 nanoparticles show a photocatalytic activity declined to half. The study demonstrates that the thin silica shell enhances the photostability, keeping the photocatalytic activity unaffected, even after several cycles of photodegradation of dyes. XPS analysis showed that the Ag0 formation on the surface of bare Ag3PO4 is greater than that on silica-coated Ag3PO4, which declines the photocatalytic activity of Ag3PO4 after five cycles of photodegradation. Electrochemical studies identified that the intermediates, such as OH˙ and O2-, formed during water oxidation play a crucial role in the photodegradation of dyes. This study can provide insights into the design of core-shell semiconductor nanostructures for reusable photocatalytic applications.

Synthesis of Ag3PO4/Ag/g-C3N4 Composite for Enhanced Photocatalytic Degradation of Methyl Orange

In this study, we have successfully constructed Ag3PO4/Ag/g-C3N4 heterojunctions via the hydrothermal method, which displays a wide photo-absorption range. The higher photocurrent intensity of Ag3PO4/Ag/g-C3N4 indicates that the separation efficiency of the photogenerated electron-hole pairs is higher than that of both Ag3PO4 and Ag/g-C3N4 pure substances. It is confirmed that the efficient separation of photogenerated electron-hole pairs is attributed to the heterojunction of the material. Under visible light irradiation, Ag3PO4/Ag/g-C3N4-1.6 can remove MO (~90%) at a higher rate than Ag3PO4 or Ag/g-C3N4. Its degradation rate is 0.04126 min-1, which is 4.23 and 6.53 times that of Ag/g-C3N4 and Ag3PO4, respectively. After five cycles of testing, the Ag3PO4/Ag/g-C3N4 photocatalyst still maintained high photocatalytic activity. The excellent photocatalysis of Ag3PO4/Ag/g-C3N4-1.6 under ultraviolet-visible light is due to the efficient separation of photogenerated carriers brought about by the construction of the Ag3PO4/Ag/g-C3N4 heterostructure. Additionally, Ag3PO4/Ag/g-C3N4 specimens can be easily recycled with high stability. The effects of hydroxyl and superoxide radicals on the degradation process of organic compounds were studied using electron paramagnetic resonance spectroscopy and radical quenching experiments. Therefore, the Ag3PO4/Ag/g-C3N4 composite can be used as an efficient and recyclable UV-vis spectrum-driven photocatalyst for the purification of organic pollutants.

Fabrication of a Novel CNT-COO-/Ag3PO4@AgIO4Composite with Enhanced Photocatalytic Activity under Natural Sunlight

In this study, a carboxylated carbon nanotube-grafted Ag₃PO₄@AgIO₄ (CNT-COO^-/Ag₃PO₄@AgIO₄) composite was synthesized through an in situ electrostatic deposition method. The synthesized composite was characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), and energy-dispersive X-ray spectroscopy (EDS). The electron transfer ability of the synthesized composite was studied using electrochemical impedance spectroscopy (EIS). The CNT-COO^-/Ag₃PO₄@AgIO₄ composite exhibited higher activity than CNT/Ag₃PO₄@AgIO₄, Ag₃PO₄@AgIO₄, and bare Ag₃PO₄. The material characterization and the detailed study of the various parameters thataffect the photocatalytic reaction revealed that the enhanced catalytic activity is related to the good interfacial interaction between CNT-COO and Ag₃PO₄. The energy band structure analysis is further considered as a reason for multi-electron reaction enhancement. The results and discussion in this study provide important information for the use of the functionalized CNT-COOH in the field of photocatalysis. Moreover, providinga new way to functionalize CNT viadifferent functional groups may lead to further development in the field of photocatalysis. This work could provide a new way to use natural sunlight to facilitate the practical application of photocatalysts toenvironmental issues.

Novel preparation of stable and highly photocatalytic Z-scheme Cs3PW12O40/Ag3PO4 photocatalysts for the photocatalytic degradation of organic contaminants in water

The Cs₃PW₁₂O₄₀/Ag₃PO₄ (CsPW/Ag₃PO₄) heterojunction photocatalyst in this study was prepared using a simple chemical precipitation method. Spherical CsPW particles were successfully deposited on Ag₃PO₄ nanocrystals, all the as-prepared samples are characterized by X-ray diffraction pattern (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), UV visible spectroscopy (UV-Vis), and X-ray photoelectron spectroscopy (XPS). The catalyst activity in relation to rhodamine B (RhB) degradation was evaluated under visible light (λ > 420 nm). The CsPW/Ag₃PO₄ heterojunction photocatalyst can effectively degrade RhB. The Z-scheme 3% CsPW/Ag₃PO₄ heterojunction photocatalyst has a higher photocatalytic ability compared with the single-component photocatalyst CsPW or Ag₃PO₄. The comparatively high photocatalytic performance can be attributed to the high matching of the energy band position and close interface contact, suggesting an enhanced separation efficiency of the photoinduced carriers of the CsPW/Ag₃PO₄ heterojunction photocatalyst. The reactive species trapping experiments demonstrated photogenerated holes (h⁺) and superoxide radicals (•O₂^-) to be the main active components of photocatalytic degradation. A possible photocatalytic mechanism is subsequently proposed.

Novel Ag3PO4/boron-carbon-nitrogen photocatalyst for highly efficient degradation of organic pollutants under visible-light irradiation

Ag₃PO₄ is an indirect bandgap semiconductor with excellent photocatalytic activity. However, it has not been widely used so far for the treatment of polluted wastewaters. This scarce use in wastewater treatment can be mainly attributed to its large crystallite size, which would be due to rapid agglomeration during the synthesis process, as well as to the photo-corrosion problem affecting this material. Hence, it would be crucial to develop a photocatalytic system involving Ag₃PO₄ nanoparticles with enhanced properties, such as higher specific surface area and excellent photocatalytic stability. To meet this demand, a novel Ag₃PO₄/boron carbon nitrogen (Ag₃PO₄/BCN) composite photocatalyst was successfully prepared in the present study via electrostatically driven self-assembly and ion exchange processes. After characterization and assessment, it was shown that the as-prepared Ag₃PO₄/BCN nanocomposite photocatalyst not only contains smaller Ag₃PO₄ nanoparticles, but also exhibits an enhanced visible-light photocatalytic activity for Rhodamine B (RhB) Methyl Orange (MO) and Tetracycline (TC) and improved stability, without decrease after 5 cycles, compared with pure Ag₃PO₄ nanoparticles. Positive synergy between Ag₃PO₄ nanoparticles and BCN nanosheets, including the increase in the number of active adsorption sites, and the restriction of the formation of Ag due to the recombination of photogenerated electron-hole pairs in Ag₃PO₄ nanoparticles, are mainly responsible for the enhanced properties of the prepared catalyst. This study shows that Ag₃PO₄/BCN composite photocatalyst would be promising for wastewater treatment, which would be of clearly environmental and public health relevance.

Nanocrystalline Ag3PO4 for Sunlight- and Ambient Air-Driven Oxidation of Amines: High Photocatalytic Efficiency and a Facile Catalyst Regeneration Strategy

Selective oxidation of amines to imines using sunlight as clean and renewable energy source is an important but challenging chemical transformation because of high reactivity of the generated imines and lack of visible light-responsive materials with high conversion rates. In addition, oxygen gas has to be purged in the reaction mixture in order to increase the reaction efficiency which, in itself, is an energy-consuming process. Herein, we report, for the first time, the use of Ag₃PO₄ as an excellent photocatalyst for the oxidative coupling of benzyl amines induced by ambient air in the absence of any external source of molecular oxygen at room temperature. The conversion efficiency for the selective oxidation of benzyl amine was found to be greater than 95% with a selectivity of >99% after 40 min of light irradiation indicating an exceptionally high conversion efficiency with a rate constant of 0.002 min^-1, a turnover frequency of 57 h^-1, and a quantum yield of 19%, considering all of the absorbed photons. Ag₃PO₄, however, is known for its poor photostability owing to a positive conduction band position and a favorable reduction potential to metallic silver. Therefore, we further employed a simple catalyst regeneration strategy and showed that the catalyst can be recycled with negligible loss of activity and selectivity.

Valorization of phosphate waste rocks to Ag3PO4/hydroxyapatite for photocatalytic degradation of Rhodamine B under visible light irradiation

A silver phosphate/hydroxyapatite (Ag₃PO₄/HA) composite was produced from phosphate waste rocks, firstly by the valorization of these wastes to HA and then by the treatment of this prepared HA with a silver nitrate solution. A type of response surface methodology, Box-Behnken experimental design, was used to find optimum synthesis parameters (silver to HA weight ratios, calcination temperature and calcination time). The visible light photodegradation of Rhodamine B in aqueous solution was used as the experimental response. The analysis of variance for the results showed that silver weight ratio is the most influential parameter on photoactivity of the synthesized photocatalyst. The optimum conditions were predicted to give an RhB degradation yield of 98.609%/4 hours under visible light conditions. In this context, a Ag/HA weight ratio of 14%, a calcination temperature of 300 °C, and a calcination time of 30 min were found to be the optimum conditions. Samples synthesized under the optimum condition were characterized by the use of X-ray diffraction, X-ray fluorescence spectrometer, Fourier transform infrared spectrum analysis, scanning electron microscopy, transmission electron microscopy and ultraviolet-visible diffuse reflection spectroscopy. By comparison with pure HA, the characterization results clearly showed the successful synthesis of the Ag₃PO₄/HA composite.

Facile synthesis of new polyhedron-like WO3/butterfly-like Ag2MoO4 p–n junction photocatalysts with higher photocatalytic activity in UV/solar region light

A series of novel efficient polyhedron-like WO₃/butterfly-like Ag₂MoO₄ p–n junction photocatalysts (denoted as AMW-x) were designed and synthesized.

Key role of hydrochar in heterogeneous photocatalytic degradation of sulfamethoxazole using Ag3PO4-based photocatalysts

To overcome the practical application limitations of Ag₃PO₄ such as photocorrosion and relatively low efficiency of photogenerated carrier seperation, Ag₃PO₄ particles were loaded onto hydrochar. The particles in the composite had a smaller crystallite size and different phase structure with more edges than pure Ag₃PO₄ particles. The as-prepared composite catalyst exhibited a different photocatalytic performance for sulfamethoxazole (SMX) degradation when varying the mass ratio of hydrochar and Ag₃PO₄. In addition to higher SMX degradation efficiency, the composite exhibited much higher TOC degradation efficiency, recycling stability, and less-toxic intermediate production. The composites enhanced visible light response, and accelerated electron transfer and photogenerated carrier separation as well. The addition of H₂O₂ to the photocatalytic system enhanced the photocatalytic activity of the composite catalyst. According to a mechanistic examination, the hole (h⁺) is the dominant reactive species for SMX degradation. This study provides new insight into high-efficiency, low cost, and easily prepared photocatalysts for pollution removal from water.

To overcome the practical application limitations of Ag₃PO₄ such as photocorrosion and relatively low efficiency of photogenerated carrier seperation, Ag₃PO₄ particles were loaded onto hydrochar.

Hierarchical flower-like NiAl-layered double hydroxide microspheres encapsulated with black Cu-doped TiO2 nanoparticles: Highly efficient visible-light-driven composite photocatalysts for environmental remediation

Herein, highly efficient composite photocatalysts comprising black Cu-doped TiO₂ nanoparticles (BCT) encapsulated within hierarchical flower-like NiAl-layered double hydroxide (LDH) microspheres were fabricated via a one-step hydrothermal route. Cu-doping and subsequent reduction treatment led to extended visible-light absorption of TiO₂ in the resulting composites, as confirmed by ultraviolet-visible diffuse reflectance spectral analysis. Moreover, thorough investigations confirmed the strong interactions between LDH and BCT in the resulting BCT/LDH composites. Notably, the BCT/LDH composites exhibited remarkable performance in the degradation of hazardous materials (methyl orange and isoniazid), superior to that of the individual components, reference P25, and P25/LDH under visible-light irradiation. Moreover, the BCT/LDH composite containing 30 wt% of BCT displayed the highest photocatalytic performance among the synthesized photocatalysts and also exhibited high stability during recycling tests with no obvious change in the activity. The superior photodegradation activity of the BCT/LDH composites was primarily attributed to efficient transfer and separation of the photoinduced charge carriers, resulting from the intimate contact interfaces between LDH and BCT. This approach represents a promising route for the rational design of highly efficient and visible-light-active LDH-based composite photocatalysts for application in energy harvesting and environmental protection.

Facile Synthesis and Characterization of Ag₃PO₄ Microparticles for Degradation of Organic Dyestuffs under White-Light Light-Emitting-Diode Irradiation

This study demonstrated facile synthesis of silver phosphate (Ag₃PO₄) photocatalysts for the degradation of organic contaminants. Ag₃PO₄ microparticles from different concentrations of precursor, AgNO₃, were produced and characterized by scanning electron microscopy, powder X-ray diffraction, and UV–visible diffuse reflectance spectroscopy. Degradation rates of methylene blue (MB) and phenol were measured in the presence of microparticles under low-power white-light light-emitting-diode (LED) irradiation and the reaction rate followed pseudo-first-order kinetics. The prepared Ag₃PO₄ microparticles displayed considerably high photocatalytic activity (>99.8% degradation within 10 min). This can be attributed to the microparticles’ large surface area, the low recombination rate of electron–hole pairs and the higher charge separation efficiency. The practicality of the Ag₃PO₄ microparticles was validated by the degradation of MB, methyl red, acid blue 1 and rhodamine B under sunlight in environmental water samples, demonstrating the benefit of the high photocatalytic activity from Ag₃PO₄ microparticles.

H2O2 rejuvenation-mediated synthesis of stable mixed-morphology Ag3PO4 photocatalysts

Ag₃PO₄ photocatalyst has attracted interest of the scientific community in recent times due to its reported high efficiency for water oxidation and dye degradation. However, Ag₃PO₄ photo-corrodes if electron accepter such as AgNO₃ is not used as scavenger. Synthesis of efficient Ag₃PO₄ followed by a simple protocol for regeneration of the photocatalyst is therefore a prerequisite for practical application. Herein, we present a facile method for the synthesis of a highly efficient Ag₃PO₄, whose photocatalytic efficiency was demonstrated using 3 different organic dyes: Methylene Blue (MB), Methyl orange (MO) and Rhodamine B (RhB) organic dyes for degradation tests. Approximately, 19 % of Ag₃PO₄ is converted to Ag⁰ after 4.30 hours of continuous UV-Vis irradiation in presence of MB organic dye. We have shown that the Ag/Ag₃PO₄ composite can be rejuvenated by a simple chemical oxidation step after several cycles of photocatalysis tests. At an optimal pH of 6.5, a mixture of cubic, rhombic dodecahedron, nanosphere and nanocrystals morphologies of the photocatalyst was formed. H₂O₂ served as the chemical oxidant to re-insert the surface metallic Ag into the Ag₃PO₄ photocatalyst but also as the agent that can control morphology of the regenerated as-prepared photocatalyst without the need for any other morphology controlling Agent (MCA). Surprisingly, the as- regenerated Ag₃PO₄ was found to have higher photocatalytic reactivity than the freshly made material and superior at least 17 times in comparison with the conventional Degussa TiO₂, and some of TiO₂ composites tested in this work.

Facile One-Step Sonochemical Synthesis and Photocatalytic Properties of Graphene/Ag3PO4 Quantum Dots Composites

In this study, a novel graphene/Ag₃PO₄ quantum dot (rGO/Ag₃PO₄ QD) composite was successfully synthesized via a facile one-step photo-ultrasonic-assisted reduction method for the first time. The composites were analyzed by various techniques. According to the obtained results, Ag₃PO₄ QDs with a size of 1-4 nm were uniformly dispersed on rGO nanosheets to form rGO/Ag₃PO₄ QD composites. The photocatalytic activity of rGO/Ag₃PO₄ QD composites was evaluated by the decomposition of methylene blue (MB). Meanwhile, effects of the surfactant dosage and the amount of rGO on the photocatalytic activity were also investigated. It was found that rGO/Ag₃PO₄ QDs (W_rGO:W_composite = 2.3%) composite exhibited better photocatalytic activity and stability with degrading 97.5% of MB within 5 min. The improved photocatalytic activities and stabilities were majorly related to the synergistic effect between Ag₃PO₄ QDs and rGO with high specific surface area, which gave rise to efficient interfacial transfer of photogenerated electrons and holes on both materials. Moreover, possible formation and photocatalytic mechanisms of rGO/Ag₃PO₄ QDs were proposed. The obtained rGO/Ag₃PO₄ QDs photocatalysts would have great potentials in sewage treatment and water splitting.

Ethanol–water ambient precipitation of {111} facets exposed Ag3PO4 tetrahedra and its hybrid with graphene oxide for outstanding photoactivity and stability

The work presents the combinative merits of {111} facet effect and the GO hybrid of Ag₃PO₄ photocatalyst with dramatically improved photocatalytic activity and admirable circulation runs for water treatment.

Fullerene-modified magnetic silver phosphate (Ag3PO4/Fe3O4/C60) nanocomposites: hydrothermal synthesis, characterization and study of photocatalytic, catalytic and antibacterial activities

In this work, fullerene-modified magnetic silver phosphate (Ag₃PO₄/Fe₃O₄/C₆₀) nanocomposites with efficient visible light photocatalytic and catalytic activity were fabricated by a simple hydrothermal approach. The composition and structure of the obtained new magnetically recyclable ternary nanocomposites were completely characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, Brunauer–Emmett–Teller (BET) specific surface area analysis, vibrating sample magnetometery (VSM), diffuse reflectance spectroscopy (DRS), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX) spectroscopy and transmission electron microscopy (TEM). This novel magnetically recyclable heterogeneous fullerene-modified catalyst was tested for the H₂O₂-assisted photocatalytic degradation of MB dye under visible light. The results show that about 95% of the MB (25 mg L⁻¹, 50 ml) was degraded by the Ag₃PO₄/Fe₃O₄/C₆₀ nanocomposite within 5 h under visible light irradiation. The catalytic performance of the Ag₃PO₄/Fe₃O₄/C₆₀ nanocomposite was then examined for 4-nitrophenol (4-NP) reduction using NaBH₄. This new nanocomposite showed that 4-NP was reduced to 4-aminophenol (4-AP) in 98% yield with an aqueous solution of NaBH₄. In both photocatalytic and catalytic reactions, the Ag₃PO₄/Fe₃O₄/C₆₀ nanocomposite exhibited higher catalytic activity than pure Ag₃PO₄. Moreover, the Ag₃PO₄/Fe₃O₄/C₆₀ nanocomposite could be magnetically separated from the reaction mixture and reused without any change in structure. The antibacterial activity of the nanocomposites was also investigated and they showed good antibacterial activity against a few human pathogenic bacteria.

Fullerene-modified magnetic silver phosphate (Ag₃PO₄/Fe₃O₄/C₆₀) nanocomposites prepared by a hydrothermal route were used as photocatalysts/catalysts for the efficient degradation and reduction of MB dye and 4-nitrophenol, respectively.

Z-scheme CaIn2S4/Ag3PO4 nanocomposite with superior photocatalytic NO removal performance: fabrication, characterization and mechanistic study

A Z-scheme CaIn₂S₄/Ag₃PO₄ photocatalyst with superior photocatalytic NO removal performance was fabricated and characterized, and mechanistic analysis was also carried out.

Self-Assembled 3D Hierarchical Copper Hydroxyphosphate Modified by the Oxidation of Copper Foil as a Recyclable, Wide Wavelength Photocatalyst

In this work, three-dimensional flower-like and petal-like copper hydroxyphosphate Cu₅(OH)₄(PO₄)₂ (CHP) based on the self-assembly of numerous nanosheets has been successfully fabricated on a copper foil by a mild one-pot wet-chemical method without ligand assistance. This research contributes to the development of the method to change the morphology of the CHP active material by varying the degree of substrate oxidation. The two different CHP architectures were used to photocatalytically degrade rhodamine 6G (Rh 6G) under solar light, which can absorb wide-range light wavelength from the UV to the near-infrared region. They all exhibit high photocatalytic activity and good durability, which are potential candidates for high performance and recyclable wide wavelength photocatalysis.

Synthesis of Ag3PO4 Crystals with Tunable Shapes for Facet-Dependent Optical Property, Photocatalytic Activity, and Electrical Conductivity Examinations

This work has developed conditions for the synthesis of Ag₃PO₄ cubes, rhombic dodecahedra, {100}-truncated rhombic dodecahedra, tetrahedra, and tetrapods by tuning the amount of NH₄NO₃, NaOH, AgNO₃, and K₂HPO₄ solutions added. Use of a minimal amount of AgNO₃ solution can form much smaller rhombic dodecahedra and tetrahedra. Submicrometer-sized Ag₃PO₄ cubes and rhombic dodecahedra with sizes larger than 300 nm do not exhibit the optical size effect, but ∼290 nm rhombic dodecahedra show a smaller band gap value than larger cubes, and tetrahedra show the most blue-shifted absorption edge. The optical facet effect is present in Ag₃PO₄ crystals. Ag₃PO₄ cubes are more photocatalytically active than rhombic dodecahedra toward photodegradation of methyl orange, but tetrahedra are inactive, showing clear presence of photocatalytic facet effects. Electron paramagnetic resonance results confirm much higher production of hydroxyl radicals from photoirradiated Ag₃PO₄ cubes than from rhombic dodecahedra, while tetrahedra yield essentially no radicals. A modified band diagram showing different degrees of band edge bending can explain these observations. All these Ag₃PO₄ crystals show poor electrical conductivity properties, but the {110} faces are slightly more conductive than the {100} faces. As a result, current rectifying I-V curves have been obtained, demonstrating that facet-dependent electrical properties are broadly observable in many semiconductor materials. This work reveals again that facet-dependent optical, photocatalytic, and electrical conductivity properties are intrinsic semiconductor properties.

Rational Design of Wide Spectral-Responsive Heterostructures of Au Nanorod Coupled Ag3PO4 with Enhanced Photocatalytic Performance

Noble metallic nanomaterials with surface plasmon resonance (SPR) effects and hot electron cell effects open new opportunities for designing efficient visible-light-driven hybrid photocatalysts. In this work, we reported a broadband visible-light responsive photocatalyst by incorporating Au nanorods (AuNRs) into Ag₃PO₄ nanostructures. The longitudinal plasma of AuNRs enabled AuNRs/Ag₃PO₄ heterostructures to harvest light energy up to 800 nm. The obtained AuNRs/Ag₃PO₄ hybrid exhibited enhanced photocatalytic efficiency toward the degradation of rhodamine B (RhB) under solar irradiation. Ag₃PO₄, RhB, and AuNRs played different roles according to the distinct optical properties of each individual component. The dominant photocatalytic process in the different light regions were divided as follows: direct excitation of Ag₃PO₄ for λ ≥ 420 nm, RhB sensitization for λ ≥ 550 nm, and SPR effect for λ ≥ 600 nm. The relationship between the pathway of charge transfer and the photocatalytic activity of the AuNRs/Ag₃PO₄ heterostructures was investigated systematically, revealing the specific role of AuNRs in regulating the photocatalytic activity. This work presents an innovative strategy for determining the comprehensive function of the SPR effect in relevant semiconductor-based photocatalysis and functional nanodevices with a broadband light responses.

Biomimetic synthesis of Ag3PO4-NPs/Cu-NWs with visible-light-enhanced photocatalytic activity for degradation of the antibiotic ciprofloxacin

Cu-NWs/Ag₃PO₄-NPs can be used as photocatalysts under visible light irradiation and have high photocatalytic performance for degradation of CPFX.

Efficient photocatalytic degradation of tetracycline hydrochloride by Ag3PO4 under visible-light irradiation

A facile, environmental-friendly Ag3PO4-PN photocatalyst was synthesized by a simple precipitation method at room temperature in the presence of ammonia and polyvinyl pyrrolidone (PVP). As-synthesized samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-visible diffuse reflectance spectroscopy (UV-vis DRS). The enhancement of photocatalytic efficiency of Ag3PO4-PN is strongly dependent on the excellent photo-absorption capacity, sharp edges and corners, and synergistic effect of PVP and NH3·H2O. The effects of catalyst dosage, TC concentration and solution pH were explored with tetracycline hydrochloride (TC) as target contamination. The mineralization was evaluated by total organic carbon (TOC) analysis and determination of the concentration of inorganic ions such as NO3 (-) and Cl(-). Radical detection experiment indicated the h(+) and ·O(2-) are major active species in the degradation of TC by Ag3PO4-PN. Moreover, photocatalyst stability and regeneration experiments exhibited the favorable stability and rejuvenation ability, suggesting a promising prospect of practical application of Ag3PO4 in the wastewater treatment.

Efficient visible driven photocatalyst, silver phosphate: performance, understanding and perspective

Photocatalysis is a promising technology that can contribute to renewable energy production from water and water purification. In order to further develop the field and meet industrial requirements, it is imperative to focus on advancing high efficiency visible light photocatalysts, such as silver phosphate (Ag3PO4). This review aims to highlight the recent progress made in the field, focusing on oxygen production from water, and organic contaminant decomposition using Ag3PO4. The most important advances are discussed and explained in detail, including semiconductor-semiconductor junctions, metal-semiconductor junctions, exposing facet control, and fundamental understanding using advanced spectroscopies and computational chemistry. The review then concludes by critically summarising both findings and current perspectives, and ultimately how the field might best advance in the near future.

A novel p-LaFeO3/n-Ag3PO4 heterojunction photocatalyst for phenol degradation under visible light irradiation

A novel heterojunction photocatalyst p-LaFeO3/n-Ag3PO4 has been prepared via a facile in situ precipitation method. It exhibits higher activity than individual Ag3PO4 and LaFeO3 in the degradation of phenol. The excellent activity is mainly attributed to its more effective separation of electron-hole pairs.

Integrated nanotechnology for synergism and degradation of fungicide SOPP using micro/nano-Ag3PO4

The integrated nanotechnology utilizes micro/nano-Ag₃PO₄ to enhance the antifungal activity of fungicide SOPP and to successively remove the SOPP residue.

The roles of conjugations of graphene and Ag in Ag3PO4-based photocatalysts for degradation of sulfamethoxazole

Three different photocatalysts, namely silver phosphate (Ag₃PO₄; AGP), Ag₃PO₄-graphene (AGP–G) and Ag/Ag₃PO₄–graphene (AAGP–G), were fabricated by a chemical precipitation approach. The mechanism of AAGP–G to degrade SMX was explained in detail.

Photoluminescence and Photocatalytic Properties of Ag3 PO4 Microcrystals: An Experimental and Theoretical Investigation

The structural, morphological, and optical properties of Ag₃ PO₄ microcrystals were systematically characterized by using a combination of theoretical calculations and experimental techniques. These microcrystals were synthesized by the microwave-assisted hydrothermal (MAH) method. XRD, Rietveld refinements, and FTIR spectroscopy were employed to carry out a structural analysis; the morphologies of the microcrystals were examined by FEG-SEM. First-principles computational studies were used to calculate the geometries of bulk Ag₃ PO₄ and its (010), (100), (001), (110), (101), (011), and (111) surfaces. A continuous decrease in the energy of the (100) surface led to a good agreement between the experimental and theoretical morphologies. Optical properties were investigated by UV/Vis spectroscopy and photoluminescence (PL) measurements, which revealed a maximum PL emission at λ=444 nm. The MAH-synthesized sample exhibited good activity for the photocatalytic degradation of methyl orange dye under visible irradiation. The photocatalytic activity and PL behavior were correlated with the observed morphology.

A new application of high-efficient silver salts-based photocatalyst under natural indoor weak light for wastewater cleaning

As a high-quantum-efficiency photocatalyst, the serious photo-corrosion of silver phosphate (Ag3PO4), limits the practical applications in water purification and challenges us. Herein, Ag3PO4 is found to have a high stability under natural indoor weak light irradiation, suggesting that we can employ it by adopting a new application strategy. In our studies, rhodamine B (RhB, cationic dye), methyl orange (MO, anionic dye) and RhB-MO mixture aqueous solutions are used as the probing reaction for the degradation of organic wastewater. It is found that RhB, MO and RhB-MO can be completely degraded after 28 h under natural indoor weak light irradiation, indicating that multi-component organic contaminants can be efficiently degraded by Ag3PO4 under natural indoor weak light irradiation. The density of natural indoor weak light is measured to be 72cd, which is merely one-thousandth of 300 W xenon lamp (68.2 × 10(3)cd). Most importantly, Ag3PO4 shows a high stability under natural indoor weak light irradiation, demonstrated by the formation of fairly rare Ag. Furthermore, we also investigate the influence of inorganic ions on organic dyes degradation. It shows that the Cl(-) and Cr(6+) ions with high concentrations in wastewater have significantly decreased the degradation rate. From the viewpoint of energy saving and stability, this study shows us that we can utilize the Ag-containing photocatalysts under natural indoor weak light, which could be extended to indoor air cleaning process.

Photocatalytic Performances of Ag3PO4 Polypods for Degradation of Dye Pollutant under Natural Indoor Weak Light Irradiation

It is still a big challenge for Ag3PO4 to be applied in practice mainly because of its low stability resistant to photo corrosion, although it is an efficient photocatalyst. Herein, we have mainly investigated its activity and stability under indoor weak light for the degradation of dye pollutants. It is amazing that under indoor weak light irradiation, rhodamine B (RhB) can be completely degraded by Ag3PO4 polypods after 36 h, but only 18% of RhB by N-doped TiO2 after 120 h. It is found that under indoor weak light irradiation, the degradation rate (0.08099 h(-1)) of RhB over Ag3PO4 polypods are 46 times higher than that (0.00173 h(-1)) of N-doped TiO2. The high activity of Ag3PO4 polypods are mainly attributed to the three-dimensional branched nanostructure and high-energy {110} facets exposed. After three cycles, surprisingly, Ag3PO4 polypods show a high stability under indoor weak light irradiation, whereas Ag3PO4 have been decomposed into Ag under visible light irradiation with an artificial Xe light source. This natural weak light irradiation strategy could be a promising method for the other unstable photocatalysts in the degradation of environmental pollutants.

Co(II)-grafted Ag3PO4 photocatalysts with unexpected photocatalytic ability: Enhanced photogenerated charge separation efficiency, photocatalytic mechanism and activity

Since the photocatalytic capability is determined by the separation and transmission efficiency of photoinduced charges, its improvement remains a challenge for development of efficient photocatalysts. Here, we made large improvement on the surface of Ag3PO4 using Co(II)-grafted Ag3PO4 by a hydrothermal method. During the photocatalytic process, Co(II) was oxidized to Co(III) by the photogenerated holes under visible light radiation, which enhanced the separation efficiency of photogenerated charges. Meanwhile, the Co(III) as-formed could oxidize dye molecules, which recovered the Co(II). The synergy of Co(II) and Ag3PO4 greatly promoted the separation and transmission efficiency of the photogenerated charges, and severely improved the photocatalytic activity of Ag3PO4. The surface grafted Co(II) on Ag3PO4 is responsible for the enhancement of photocatalytic activity.